PAVING & FLAGS · a world of inspiring possibilities. Because they are strong, weatherproof,...

PAVING & FLAGSSPECIFICATIONS

www.acheson-glover.com

CI/SfB

UniclassL534

(90.41) S

www.acheson-glover.comAcheson & Glover

02 03

About Acheson & GloverEstablished in 1960, Acheson & Glover (A&G) has spent over50 years designing and manufacturing a wide range ofproducts and solutions in concrete for both the residentialand the commercial sectors and are recognised as one ofthe most trusted concrete producers in the UK and Ireland.

Through advances in manufacturing technology and astringent quality control that stretches all the way from thequarry to the final product, we have a team of people whohave the skills and imagination to not only rethink and re-engineer in concrete, but also to redefine it.

TerraPave®, Rimini Ground

ContentsIntroduction 03

Nationwide Projects 04

FLAGS 06

TerraPave® Flags 08

Manor Stone® Flags 12

Canterra Flags® 14

Plaza Flags 16

Classic Flags DISCONTINUED 18

Riven Flags DISCONTINUED 20

Bevelled Flags DISCONTINUED 22

Tactile & Deterrent Flags 24

PAVING 26

Plaza 28

River Stone 32

Country Cobble® 36

Strada DISCONTINUED 40

Boulevard® 42

Rectangular 46

Xflo® Permeable Paving Solutions 50

Circles 54

Setts 55

Kerbs & Steps 56

Complementary Products 58

Machine Lay 59

TECHNICAL INFO 60

Laying Patterns 62

British & European Standards 65

Design & Installation Guidance 66

How to Specify 67

Design Support 67

BREEAM 68

Maintenance Guidance 69

Health, Safety & The Environment 70

TerraPave® Flags, Rimini & Florento Ground

A&G’s paving and flagsare versatile to suit the mostdemanding of imaginations, introducing a completely newdimension to design and construction. Ideal for use in thedesign and construction of prestigious, private andcommercial developments, allowing professional designersto create projects with true visual impact.

With the best technical expertise in the field we can helpyou turn your vision into a reality.

PAVING & FLAGS

Light DutyTraffic >60mm

FrostResistant

PedestrianUse

Heavy DutyTraffic 80mm

PRODUCT KEY

www.acheson-glover.com/cemarking

We are the expertsin commercial paving and flags

BANGOR ACADEMY


04 05

THE MARSHES, DUNDALK SELBY COLLEGE, YORKSHIRE

EYRE SQUARE, GALWAY

Nationwide

Paving & Flags

It's a fact - good design enhanceslives and communities.Professional designers and developers have embraced

the fact that there is a direct link between the standard

of design in the local environment and a community's

quality of life.

We have seen the transformation of our cities and

want our communities to enjoy similar benefits.

Already many towns and cities are reaping the

aesthetic, economic and practical rewards of

pedestrianising streets and enhancing parks, walkways

and waterfronts.

Today designers, working in partnership with paving

specialist, A&G, have unsurpassed scope for new ideas.

We are continually developing innovative shapes, sizes,

textures and colour ranges in paving materials, creating

a world of inspiring possibilities.

Because they are strong, weatherproof, long-lasting

and versatile, paving and flags are the preferred

materials for hard landscaping and with A&G's

extensive range of paving and flags, accessories and

related products, all manufactured in compliance with

the highest industry standards, the options for creating

enduring, cost-effective design solutions have never

been better.

Paving & Flags

A&G’s innovative paving and flags range, will satisfy

the most demanding design brief, be it industrial,

commercial, residential or public. Paving and flag

products are widely used in many prestigious

developments, city roadways, landscape and industrial

projects. Durable, versatile and structurally resistant to

frost damage, chemicals, fuel and oils, this quality

paving offers attractive, high-performance solutions for

busy urban areas, docks, airports, retail parks and

industrial sites, even domestic driveways.

Each product range within our extensive line-up has its

own distinctive qualities, allowing you to select paving

that exactly matches the character and demands of

any project. The huge choice, together with the

expertise of our professional design and technical

team, means A&G can provide total solutions for all

your paving needs.

PROJECTS

SPRINGFIELD QUAYS, GLASGOW

RATHMORE GRAMMAR SCHOOL

WEST PARK SHANNON6TH FORM COLLEGE, STOKE-ON-TRENT

LEICESTER COLLEGE


FLAGS

WAKEFIELD COLLEGETerraPave®, Rimini & Florento Ground


06 07

LARGE ELEMENT

A&G’s innovative flags range will satisfy the mostdemanding design brief, be it industrial, commercial,public or residential. A&G flags products are widelyused in many prestigious developments, city roadways,landscape and industrial projects.



TERRAPAVE®

Natural Aggregate Flags

Acheson & Glover

08 09

PREMIUM NATURAL AGGREGATE FLAGSENHANCED WITH GRANITE CHIPPINGS

A uniquely attractive and cost-effective alternative totraditional paving for professional designers andspecifiers. TerraPave® flags are manufactured incomplementary ground and textured finishes and will setany project apart with a distinctive and lasting visualimpact rich in natural appeal.

We carefully select our aggregate materials from quarriesthroughout Europe. TerraPave® flags are manufacturedto precise tolerances in a state-of-the-art factory, whichemploys the most advanced production techniques inEurope to make laying faster and easier. Bespoke colourscan be manufactured for large projects.

INTERNAL APPLICATIONSThe TerraPave® range is suited to internalapplications due to its exceptional qualityand attractive finish. No wonder it's thechoice of prestigious office projects,educational establishments and gardencentres throughout the UK and Ireland.A beautiful solution for those highlypedestrianised areas.

< TerraPave®, Rimini Ground

TerraPave®, Milano Ground

NBS PLUS: Q25 SLAB/BRICK/BRICK/SETT/COBBLE PAVINGS: 31, 315BS EN: 1339:2003CARBON: 19.0Kg CO2 per m2


TERRAPAVE®

Natural Aggregate Flags

FEATURES & BENEFITS: Highest quality product available in both ground and textured finishes. Specially selected natural aggregates includinggranite - gives an outstanding aesthetic appeal.Offers exceptional durability with in a full range of natural colours.Contains the latest in chemical additives to reducewater absorption which lessens the effect ofnaturally occurring efflorescence. Resistant to the effects of freeze/thaw that can be caused by de-icing salts.Dimensionally accurate.

MANUFACTURE: TerraPave® flags are manufactured from specially selectedgranite and other natural aggregates. Their exceptionalappearance is achieved by using the most up-to-datemanufacturing and finishing equipment.

TRAFFICKING:40mm and 50mm depth TerraPave® is suitable for patios,pathways and pedestrian walkways. >65mm is required for vehicular access.

STANDARDS & PERFORMANCE: TerraPave® is manufactured in compliance with theperformance levels of BS EN 1339:2003.

For vehicular access, 400x400mm can be manufactured indepths of 65mm-80mm in compliance with BS 1339:2003Annex NA (consult our technical department for advice on theflag most suitable for specific breaking load requirements.)

• Bending Strength: Min. Class 1 [>3.5 Mpa]

• Slip Potential: Low Slip Potential

• Abrasion Resistance: Class 3

• Weathering Resistance: Class 3(Resistant to freeze/thaw associated with de-icing salts)

CHAMFER SIZE: All depths have a chamfer of between 3-5mm. This assists withedge protection and sand jointing.

JOINT WIDTH: TerraPave® flags are normally ‘butt jointed’ in pedestrian areas.However, in areas where vehicular overrun is anticipated,TerraPave® 65-80mm should be laid as a flexible pavement with5mm joints filled with suitable jointing sand (as per BSEN 13392003 - National Annex NA (informative)). It is recommendedspacers are used to ensure joint width is maintained.

Note: During installation care should be taken to protect theproduct from wet and dark base sand, dirt and detritus whileremaining construction works are completed. To ensure theflags remain in good condition, regular cleaning is essentialafter installation.Careful consideration should be given to the selection ofjointing material. Some sand colours may stain the pavingsurface. A&G recommends the use of silver granite sand with ourFlorento, Rimini and Milano flags.TerraPave® flags are manufactured using natural stone whichcan vary slightly in tone. Where possible it is advised to orderfrom the same production run to avoid the possibility of tonevariations (shading).Like all quality concrete products with a high cement content,TerraPave® flags can display the effects of efflorescence.Sometimes known as ‘white bloom’, this naturally occurringphenomenon will disappear over time and does not effectthe structural integrity of the flag.Care should be taken when handling TerraPave® flags. Duringtransport and delivery some ‘chipping’ (up to 5%) can beexpected. These can be used for cuts and detailing.

Florento Ground

Flor

ento

Tex

ture

d

Sorrento Ground

Sorr

ento

Tex

ture

d

Rimini Ground

Rim

ini T

extu

red

Milano Ground

Mila

no T

extu

red

Verona Ground

Vero

na T

extu

red

Genoa Ground

Gen

oa T

extu

red

Pollensa Ground

Polle

nsa

Text

ured

Tuscany GroundArno Ground

Arn

o Te

xtur

ed

Como Ground

Com

o Te

xtur

ed

Tusc

any

Text

ured

COLOURS:

Acheson & Glover

10 11

TerraPave®, Rimini & Florento Ground

TerraPave®, Rimini Textured, Country Cobble, Slate Setts TerraPave®, Florento Textured

TerraPave®, Verona Ground

PRODUCT DATA:

SIZE (mm): 400x400 600x400

DEPTH: 50mm 50mm

M2 PER PACK: 15.36 15.36

NO. PER M2: 6.25 4.17

NO. PER PACK: 96 64

WEIGHT PER PACK: 1.8 t 1.8 t

COLOURS: AS ABOVE AS ABOVE

400x400 600x400

80mm 80mm

9.6 9.6

6.25 4.17

60 40

1.84 t 1.84 t

TerraPave® is also available in a depth of 40mm and nominal depths above 50mm and up to 80mm.

NEW SIZE:500 x 500mm

Please note minimum order quantities arerequired for certain colours and sizes. We advise you speak to a member of thesales team in advance of order placement.>>

FEATURES & BENEFITS: High quality closed face finish.

Modular system - each pack contains a multipleof each of the different sizes available to producea distinctive pattern.

Beautiful undulating surface and subtle wavededge can be used in both contemporary andtraditional surroundings.

Colour blends have been specially chosen tocomplement most settings.

Can be used indoors.

Contains the latest chemical additives to reducewater absorption which lessens the effect ofnaturally occurring efflorescence.

MANUFACTURE: Manor Stone is manufactured from specially selectedpremium aggregates to create a high quality, closedface finish. Its unique undulating finish is obtained byusing the most up-to-date manufacturing processesand machinery.

TRAFFICKING:

Suitable for patios, pathways, pedestrian walkways andindoor use. Not suitable for driveway usage.

STANDARDS & PERFORMANCE: Manor Stone is manufactured in compliance with theperformance levels in BS EN 1339:2003 ConcreteFlags. Requirements and test methods areindependently accredited by BSI.

BS EN 1339 states the following as minimumperformance criteria for category I and II flags:

• Bending Strength: Min. Class 1 [>3.5 Mpa]• Slip Potential: Low Slip Potential

JOINT WIDTH: 1-3mm spacers on each flag leaving a 3-7mm jointwhen laid.

Note: During installation care should be taken to protect theproduct from wet and dark base sand, dirt and detritus whileremaining construction works are completed. To ensure the flagsremain in good condition, regular cleaning is essential afterinstallation.Light coloured blocks emphasise marks and oil spills. It must beaccepted that these products will need more maintenance if theoverall appearance is to be maintained.

Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Blackwaterflags.

210x315mm x13 no.

315x315mm x52 no.

420x315mm x39 no.

525x315mm x26 no.

Each pack contains 130 flagunits of four assorted sizes:


12 13

MANORSTONE®

< Manor Stone, Blackwater

Manor Stone® is manufactured from premium aggregates with aunique undulating surface finish giving the appearance of naturalriven stone flags. The warm rustic earth colour tones and multipleunit sizes make Manor Stone® ideally suited to pathways andpedestrian walkways in traditional schemes or conservation areas.

The Blackwater version contains granite chippings, giving it asophisticated seductive shimmer, while the Camborne version hashues of reds and greys, resulting in a distinctly Mediterranean feel.

To add to the choice, Cotswold with its subtle colour blend, providesa more traditional, mellow appeal.

Manor Stone® is supplied in a mix of four different sizes whichoffers the opportunity to create a distinctive pattern.

SPECIALLY SELECTEDAGGREGATES WITH AUNIQUE UNDULATINGFINISH


Blackwater Cotswold Camborne

COLOURS:

PRODUCT DATA:

SIZE (mm): 210x315 315x315 420x315 525x315

DEPTH:

M2 PER PACK:

NO. PER M2:

NO. PER PACK:

WEIGHT PER PACK:

COLOURS:

FLAGS NOT SOLD INDIVIDUALLY

50mm

15.6m2 per pack

N/A

130 flags of 4 assorted sizes

1.8 t

BlackwaterCamborneCotswold

Please note minimum order quantities arerequired for certain colours. We advise youspeak to a member of the sales team inadvance of order placement.>>


14


CANTERRA®

FLAGS

Sandstone

Light Grey

Silver

Slate

COLOURS:

< Canterra Flags, Silver

Canterra Flags, Slate

PRODUCT DATA:

SIZE: 400x400mm 600x400mm

DEPTH: 40mm 40mm

M2 PER PACK: 14.72m2 11.04m2

NO. PER M2: 6.25 4.17

NO. PER PACK: 92 46


COLOURS: SANDSTONE SANDSTONESILVER SILVERSLATE SLATE

LIGHT GREY LIGHT GREY

FEATURES & BENEFITS:

‘Brushed’ surface gives a high quality finish witha subtle semi-sheen appearance. Granite chippings enhance the look.

Subtle embossed surface adds texture tocomplement most surroundings.

Light and easily managed.

Easy to clean.

Available in 3 depths.

Frost resistant.

MANUFACTURE: Canterra flags are manufactured from locally sourcedaggregates. They are finished with a subtle embossedsurface and brushed finish.

TRAFFICKING:Canterra flags are suitable for pathways, patios andpedestrian walkways.

STANDARDS & PERFORMANCE:

Canterra flags are wet cast and are manufactured incompliance with the performance levels of BS EN1339:2003 Concrete Paving Flags.• Bending Strength: Min. Class 1 [>3.5 Mpa]• Slip Potential: Low Slip Potential• Abrasion Resistance Class 2• Weathering Resistance Class 3

(Resistant to freeze/thaw associated with de-icing salts)

CHAMFER SIZE: Canterra flags have a chamfer size of between 3mm-5mm. This assists with edge protection and sandjointing.

JOINT WIDTH: Canterra flags are normally butt jointed but spacers canbe used if deemed necessary.

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the flags remain in goodcondition, regular cleaning is essential after installation.

Careful consideration should be given to the selection of jointing material.Some sand colours may stain the paving surface. A&G recommends theuse of silver granite sand with our Silver, Slate and Light Grey flags.

Canterra flags are manufactured using fine aggregates which can varyslightly in tone. Where possible it is advised to order from the sameproduction run to avoid the possibility of tone variations (shading).

Like all quality concrete products with a high cement content, Canterraflags can display the effects of efflorescence. Sometimes known as ‘whitebloom’, this naturally occurring phenomenon will disappear over time anddoes not effect the structural integrity of the flag.

Care should be taken when handling Canterra flags. During transport anddelivery some ‘chipping’ (up to 5%) can be expected. These can be usedfor cuts and detailing.

Canterra flags are vertically stacked, bound horizontally with a strap atboth the top and bottom of the bale and are not on pallets.

SUBTLE TEXTURE WITHGRANITE CHIPPINGS & A BRUSHED SEMI-SHEENFINISH

15

The lightly embossed surface and colours of Canterra® flags make themideal for conservation areas and traditional architectural schemes.With the inclusion of granite chippings and a brushed semi-sheenappearance, Canterra® flags provide a high quality finish.

Please note minimum orderquantities are required forcertain colours and sizes. We advise you speak to amember of the sales team inadvance of order placement.

>>

ADDITIONAL SIZES:400 x 400 x 50mm600 x 400 x 50mm600 x 400 x 63mm


PLAZAFLAGS

Sandstone

Graphite

Slate

Silver

COLOURS:

< Plaza Flags, Sandstone

FEATURES & BENEFITS: High quality granite aggregate.

Washed finish gives a natural appearance.

Understated colours create a contemporary backdrop to modern or traditional projects.

Can be used with Plaza paving blocks to createdifferent patterning effects.

Excellent slip resistance.

MANUFACTURE: Plaza flags are manufactured from specially selectedgranite aggregate. The premium stone washedappearance is obtained using computer controlledwashing machinery which leaves a uniquely naturalfinish.

TRAFFICKING:Plaza flags are suitable for patios, pathways andpedestrian walkways.

STANDARDS & PERFORMANCE: Plaza flags are manufactured in compliance with theperformance levels in BS EN 1338:2003 ConcretePaving Flags: Requirements and test methods areindependently accredited by BSI.

BS EN 1338 states the following as minimumperformance criteria for category I and II paving:

• Bending Strength: Min. Class 1 [>3.5 Mpa]• Slip Potential: Low Slip Potential


• Weathering Resistance: Class 3

CHAMFER SIZE: Plaza flags have a chamfer size of 3mm. This assistswith edge protection and sand grouting.

JOINT WIDTH: 2mm spacers on each flag leaving a 3mm minimumjoint when laid.

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. This is especially true for lightcoloured flags. To ensure the paving remains in good condition, regularcleaning is essential after installation.

Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Silver and Slateflags.

Plaza flags are manufactured using fine aggregates which can varyslightly in tone. Where possible it is advised to order from the sameproduction run to avoid the possibility of tone variations (shading).

Like all quality concrete products with a high cement content, Plazaflags can display the effects of efflorescence. Sometimes known as‘white bloom’, this naturally occurring phenomenon will disappear overtime and does not effect the structural integrity of the flag.

Care should be taken when handling Plaza flags. During transport anddelivery some ‘chipping’ (up to 5%) can be expected. These can beused for cuts and detailing.

PREMIUM GRANITESTONE WASHED FLAGS


16 17

Using the finest natural aggregates and sands we have createda unique flag option, ideal on schemes designed to lead theway. Plaza is a system you can use on every project yet giveeach client a completely individual result.

The superb natural finish is manufactured to tight tolerancesensuring designs can be brought to life easily and accurately.Plaza increases the palette of paving materials available todesigners particularly for commercial, retail and housingschemes - bringing a new dimension to hard landscaping.

Also available in 80mm depth for areas requiring vehicular overrun.

PRODUCT DATA:

SIZE: 400x400mm

DEPTH: 50mm

M2 PER PACK: 15.36m2

NO. PER M2: 6.25

NO. PER PACK: 96

WEIGHT PER PACK: 1.725 t

COLOURS: SILVERSLATE

SANDSTONEGRAPHITE




CLASSICFLAGS

Acheson & Glover

18 19

Sandstone Slate Grey

COLOURS:

PRODUCT DATA:

SIZE (mm): 400x400

DEPTH: 40mm

M2 PER PACK: 19.2m2

NO. PER M2: 6.25

NO. PER PACK: 120


COLOURS: SANDSTONESLATEGREY

Also available in nominal depths from 50mm up to80mm.

FEATURES & BENEFITS: Richly textured flags made from fine aggregates.

Made in 3 specially selected colours that blend in with most landscape requirements.

Textured finish is suitable for areas requiringhigher levels of slip resistance.

Resistant to the effects of freeze/thaw that can be caused by de-icing salts.

MANUFACTURE: Made from locally sourced and graded aggregates,Classic Flags’ textured appearance is achieved by usingup-to-date manufacturing and finishing technology.

TRAFFICKING:40mm Classic Flags are suitable for pathways, patiosand pedestrian walkways. >65mm is required forvehicular access.


The Classic Flag is manufactured in compliance withthe performance levels of BS EN 1339:2003 ConcretePaving Flags.

For vehicular access Classic Flags can be manufacturedin depths of 65-80mm in compliance with BS EN1339:2003 Annex NA (consult our technicaldepartment for advice on the flag most suitable forbreaking load requirements).

• Bending Strength: Min. Class 1 [>3.5 Mpa]• Slip Potential: Low Slip Potential• Abrasion Resistance Class 2• Weathering Resistance Class 3

(Resistant to freeze/thaw associated with de-icing salts)

CHAMFER SIZE: All depths have a chamfer size of between 3-5mm.This assists with edge protection & sand jointing.

JOINT WIDTH: Classic Flags are normally ‘butt jointed’ but spacers canbe used if a space is deemed necessary.

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the flags remain in goodcondition, regular cleaning is essential after installation.

Careful consideration should be given to the selection of jointing material.Some sand colours may stain the paving surface. A&G recommends theuse of silver granite sand with our Grey and Slate flags.

Classic Flags are manufactured using fine aggregates which can varyslightly in tone. Where possible it is advised to order from the sameproduction run to avoid the possibility of tone variations (shading).

Like all quality concrete products with a high cement content, ClassicFlags can display the effects of efflorescence. Sometimes known as ‘whitebloom’, this naturally occurring phenomenon will disappear over time anddoes not effect the structural integrity of the flag.

Care should be taken when handling Classic Flags. During transport anddelivery some ‘chipping’ (up to 5%) can be expected. These can be usedfor cuts and detailing.

< Classic Flags, Sandstone

The Classic Flag range has a mellow rustic character, asappealing in conservation areas as they are in contemporaryschemes. Richly textured, they are manufactured from fineaggregates for a more natural appearance.

Classic Flags, Grey

RICHLY TEXTUREDFLAGS MADE FROMFINE AGGREGATES

ADDITIONAL SIZES:600 x 400mm

500 x 500mm


>>

APOLOGIES, THISPRODUCT HAS BEENDISCONTINUED


RIVENFLAGS


20 21


COLOURS:

< Riven Flags, Slate

Riven Flags, Slate

Riven flags provide an attractive, cost effective option forpatios and paths. The deeply coloured Slate co-ordinatesperfectly with contemporary schemes while Sandstone andGrey look elegant in traditional settings. Lightweight andeasy-to-handle.

PRODUCT DATA:

SIZE (mm): 400x400 600x400

DEPTH: 40mm 40mm

M2 PER PACK: 14.08m2 10.56m2

NO. PER M2: 6.25 4.17

NO. PER PACK: 88 44


COLOURS: SANDSTONE SANDSTONESLATE SLATEGREY GREY

FEATURES & BENEFITS: An attractive cost effective flag for patios andpathways.

The riven surface finish gives a textured detail thatcomplements most surroundings.

Suitable for indoors.

An embossed riven surface finish.

MANUFACTURE: Riven flags are made from locally sourced aggregates.They are finished with an embossed riven surface finish.

TRAFFICKING:Riven flags are suitable for pathways, patios andpedestrian walkways.

STANDARDS & PERFORMANCE: Riven flags are wet cast and are manufactured incompliance with BS EN 1339: 2003 Concrete PavingFlags.

• Bending Strength: Class 1


CHAMFER SIZE: Riven flags have a chamfer size of between 3mm - 5mm.This assists with edge protection and sand jointing.

JOINT WIDTH: Riven flags are normally ‘butt’ jointed but spacers can beused if deemed necessary.

Note: During installation care should be taken to protect the product fromwet and dark base sand, dirt and detritus while remaining constructionworks are completed. To ensure the flags remain in good condition,regular cleaning is essential after installation.Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Grey and Slateflags.

Riven flags are manufactured using fine aggregates which can varyslightly in tone. Where possible it is advised to order from the sameproduction run to avoid the possibility of tone variations (shading).

Like all quality concrete products with a high cement content, Rivenflags can display the effects of efflorescence. Sometimes known as‘white bloom’, this naturally occurring phenomenon will disappearover time and does not effect the structural integrity of the flag.

Care should be taken when handling Riven flags. During transport anddelivery some ‘chipping’ (up to 5%) can be expected. These can beused for cuts and detailing.

Flags are vertically stacked, bound horizontally with a strap at both thetop and bottom of the bale and are not on pallets.

LIGHTWEIGHT ANDEASY-TO-HANDLEPATTERNED FLAGS


ADDITIONAL SIZES:400 x 400 x 50mm

600 x 400 x 63mm



BEVELLEDFLAGS


22


Terracotta

COLOURS:

FEATURES & BENEFITS: Smooth, slip resistant finish.

Available in a range of popular colours.

Economical and hard wearing solution forpractically any hard landscaping project.

Through colour mix adds to the flags versatility,especially in the make-up of steps.

MANUFACTURE: Bevelled flags are made from locally sourced aggregates.They have a distinctive bevelled edge chamfer.

TRAFFICKING:40mm Bevelled flags are suitable for pathways, patiosand pedestrian walkways.

63mm are required for areas with vehicular access.


Bevelled flags are dry pressed and are manufactured incompliance with BS EN 1339: 2003 Concrete PavingFlags.

For vehicular access 63mm Bevelled flags are advised incompliance with BS EN 1339: 2003 Annex NA (ourtechnical department will advise on the flags mostsuitable for breaking load requirements).

• Bending Strength: Class 1


CHAMFER SIZE: All depths have a chamfer size of between 3.5 - 5.0mm.This assists with edge protection and sand jointing.

JOINT WIDTH: Bevelled flags are normally ‘butt’ jointed but spacers canbe used if a space is deemed necessary..

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the flags remain in goodcondition, regular cleaning is essential after installation.Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Grey and Slate flags.

Like all quality concrete products with a high cement content, Bevelledflags can display the effects of efflorescence. Sometimes known as‘white bloom’, this naturally occurring phenomenon will disappear overtime and does not effect the structural integrity of the flag.

Care should be taken when handling Bevelled flags. During transportand delivery some ‘chipping’ (up to 5%) can be expected. These can beused for cuts and detailing.

Flags are vertically stacked, bound horizontally with a strap at both thetop and bottom of the bale and are not on pallets.

Bevelled flags are manufactured using fine aggregates which can varyslightly in tone. Where possible it is advised to order from the sameproduction run to avoid the possibility of tone variations (shading).

Bevelled flags have a smooth, slip-resistant finish. Aquality product which provides an economical and hard-wearing solution for any hard landscape project.

< Bevelled Flags, Slate

Bevelled Flags, Sandstone

HARD WEARING,ECONOMICAL ANDEASY TO HANDLE

23

PRODUCT DATA:

SIZE (mm): 400x400 600x600

DEPTH: 40mm 40mm

M2 PER PACK: 16m2 9m2

NO. PER M2: 6.25 2.78

NO. PER PACK: 100 25


COLOURS: GREY GREYSANDSTONE SANDSTONE

SLATE SLATETERRACOTTA TERRACOTTA

400x400 600x600

50mm 50mm

16m2 9m2

6.25 2.78

80 20

1.5 t 0.8 t

GREY GREYSANDSTONE SANDSTONE

SLATE SLATETERRACOTTA TERRACOTTA


ADDITIONAL SIZE:400 x 400 x 63mm

600 x 600 x 63mm

APOLOGIES, THISPRODUCT HAS BEENDISCONTINUEDVIEW OUR PEDRA FLAGS ‘SMOOTH’ FINISHAS AN ALTERNATIVEwww.acheson-glover.com/pedra

NBS PLUS: Q25 SLAB/BRICK/BRICK/SETT/COBBLE PAVINGS: 31, 315BS EN: 1339:2003 / DD CEN/TS 15209:2008CARBON: 13.3 - 17.4Kg CO2 per m2

TACTILE & DETERRENT FLAGS


24

Distinctive surface profiles and colours to enable the visuallyimpaired and partially sighted to recognise various hazards.

Blister Flags, Red

< Corduroy Flags, Buff

DISTINCTIVESURFACE PROFILESAND COLOURS

400x400

50mm

12.8

6.25

80

1.5 t

BUFFRED

GREY

400x400

50mm

12.8

6.25

80

1.5 t

BUFF-

GREY

600x600

50mm

5.4

2.78

15

0.63 t

--

GREY

BLISTER CORDUROY DETERRENTPRODUCT DATA:

DEPTH (mm):

M2 PER PACK:

NO. PER M2:

NO. PER PACK:

WEIGHT PER PACK:

COLOURS:

Buff - Blister Buff - Corduroy Grey - Deterrent

Red - Blister Grey - Corduroy

COLOURS:

63mm depth is also available for Blister and Corduroy only.

25

FEATURES & BENEFITS: Suitable for areas where paving surface indicators are required.

Distinctive colours and surface profiles givesguidance or warning of potential hazards to the visually empaired.

The deterrent flags profile discourages access.

MANUFACTURE: Dry pressed.

TRAFFICKING:50mm depth flags are suitable for areas of pedestrianwalkways and light vehicular overrun.

For areas of regular vehicular overrun use 63mm depth.


Tactile and deterrent flags are manufactured incompliance with the performance levels of BS EN1339:2003 Concrete Paving Flags.

Also manufactured to DD CEN/TS 15209:2008.

CHAMFER SIZE: There is no chamfer on Tactile or Deterent flags.

JOINT WIDTH: Tactile flags are normally ‘butt jointed’ in pedestrianareas. However, in areas where vehicular overrun isanticipated, 65-80mm should be laid as a flexiblepavement with 5mm joints filled with suitable jointingsand (as per BSEN 1339 2003 - National Annex NA(informative)). It is recommended spacers are used toensure joint width is maintained.

Note: During installation care should be taken to protect theproduct from wet and dark base sand, dirt and detritus whileremaining construction works are completed. To ensure the flagsremain in good condition, regular cleaning is essential afterinstallation.Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface.

Tactile flags are manufactured using fine aggregates which can varyslightly in tone. Where possible it is advised to order from the sameproduction run to avoid the possibility of tone variations (shading).

Like all quality concrete products with a high cement content, Tactileflags can display the effects of efflorescence. Sometimes known as‘white bloom’, this naturally occurring phenomenon will disappearover time and does not effect the structural integrity of the flag.

Care should be taken when handling Tactile flags. During transportand delivery some ‘chipping’ (up to 5%) can be expected. These canbe used for cuts and detailing.


PAVING BLOCKSSMALL ELEMENT

Durable, versatile and structurally resistant to frostdamage, chemicals, fuel and oils, A&G’s range of qualitypaving offers attractive, high-performance solutions forbusy urban areas, docks, airports, retail parks, industrialsites and even domestic driveways.

Each product range within our extensive line-up has itsown distinctive qualities, allowing you to select pavingthat exactly matches the character and demands of anyproject. The huge choice, together with the expertise ofour professional design and technical team, means A&Gcan provide total solutions for all your paving needs.

SOUTH WEST ACUTE HOSPITAL, ENNISKILLENPlaza, Silver

Reconstituted Granite Kerbs, Grey


26 27



PLAZA

Acheson & Glover

28 29

Using the finest natural aggregates and sands we havecreated a unique paving option, ideal on schemesdesigned to lead the way. Plaza is the one system youcan use on every project yet give each client a completelyindividual result.

The superb natural finish is manufactured to tighttolerances ensuring designs can be brought to life easilyand accurately.

Plaza increases the palette of pavingmaterials available to designersparticularly for commercial, retail andhousing schemes - bringing a newdimension to hard landscaping.

PREMIUM GRANITE STONEWASHED PAVING

Plaza, Silver & Slate

< Plaza, Slate & Silver

NBS PLUS: Q24 INTERLOCKING BRICK/BLOCK ROADS/PAVINGS: 10, 110, 112, 113 Q25 SLAB/BRICK/BRICK/SETT/COBBLE PAVINGS: 31, 315

BS EN: 1338:2003CARBON: 20.0Kg CO2 per m2


PLAZA

Acheson & Glover

30

Sandstone

Graphite

Slate

Silver

COLOURS:

< Plaza, Slate & Silver

Plaza, Sandstone & Slate

FEATURES & BENEFITS: High quality granite aggregate.

Washed finish gives a natural appearance.

Understated colours create a contemporary backdrop to modern or traditional projects.

Modular pavers can be used to create differentpatterning effects.

Four colours in multiple sizes.

Excellent slip resistance.

MANUFACTURE: Plaza is manufactured from specially selected graniteaggregate. Its premium stone washed appearance isobtained using computer controlled washingmachinery which leaves a uniquely natural finish.

TRAFFICKING:Within our Plaza range you will find a block size forevery application, from category I (Heavy DutyPavements of between 0.5 - 12msa*) to category IV

(Private drives, paths and patios) as outlined in BS7533-2:2001.

Its small plan dimensions or its 80mm thicknessmake it ideally suited for the heavier traffic loadingsof categories I and II.

msa* - Millions of Standard Axles expectedthroughout 20 year design life of pavement.

STANDARDS & PERFORMANCE: Plaza is manufactured in compliance with theperformance levels in BS EN 1338:2003 ConcretePaving Blocks: Requirements and test methods areindependently accredited by BSI.


• Tensile splitting strength: >3.6 Mpa


• Abrasion resistance: Class 3

• Weathering resistance: Class 3

PRODUCT DATA:

SIZE (mm): 300x150 150x150 200x150

DEPTH: 60mm 60mm 60mm

M2 PER PACK: 12.6 12.6 12.6

NO. PER M2: 22.2 44.4 33.3

NO. PER PACK: 280 560 420

WEIGHT / PACK: 1.75 t 1.75 t 1.75 t

COLOUR SILVER SILVER SILVERAVAILABILITY: SLATE SLATE SLATE

SANDSTONE SANDSTONE SANDSTONEGRAPHITE GRAPHITE GRAPHITE

+ Do not mix with other Plaza 80mm

400x400 400x200 200x200 200x100 + 200x150 150x150

80mm 80mm 80mm 80mm 80mm 80mm

9.6 9.6 9.6 9.72 9 9

6.25 12.5 25.0 50 33.3 44.4

60 120 240 486 300 400

1.76 t 1.76 t 1.76 t 1.7 t 1.24 1.22

SILVER SILVER SILVER SILVER SILVER SILVERSLATE SLATE SLATE SLATE SLATE SLATE

SANDSTONE SANDSTONE SANDSTONE SANDSTONE SANDSTONE SANDSTONEGRAPHITE GRAPHITE GRAPHITE GRAPHITE GRAPHITE GRAPHITE

31

CHAMFER SIZE: 60mm / Xflo: pencil round.80mm: minimum 3mm horizontally and vertically.

JOINT WIDTH: 60mm: 1.5mm spacers on each paver leaving a 2mmminimum joint when laid.80mm: 2mm spacers on each paver leaving a 3mmminimum joint when laid.

Note: During installation care should be taken to protect the product fromwet and dark base sand, dirt and detritus while remaining constructionworks are completed. To ensure the paving remains in good condition,regular cleaning is essential after installation.

Careful consideration should be given to the selection of jointing material.Some sand colours may stain the paving surface. A&G recommends theuse of silver granite sand with our Silver, Slate and Graphite pavers.


Also available as

See page 53


RIVERSTONE

Acheson & Glover

32 33

< River Stone, Slaney

The gently undulating surface of River Stone is availablein 3 unique colour blends and creates a completely newpaving option. In a contemporary scheme it will addtexture and form yet maintaining a crisp, clean, feel.While in a traditional scheme it will add depth andcharacter.

River Stone, Glenarm

UNIQUE GENTLY RIPPLED SURFACE

NBS PLUS: Q24 INTERLOCKING BRICK/BLOCK ROADS/PAVINGS: 10, 110, 112, 113 BS EN: 1338:2003CARBON: 19.8Kg CO2 per m2


RIVERSTONE

Acheson & Glover

34

Blackwater Glenarm Slaney

COLOURS:

FEATURES & BENEFITS: Unique undulating surface.

Sharp edge finish.

Three / four distinct colour blends willcomplement most landscape settings whethercontemporary or traditional.

Highly durable finish.

MANUFACTURE: River Stone is manufactured from specially selectedpremium aggregates to create a high grade finish. Thelatest manufacturing processes are used to create itsunique undulating surface.

TRAFFICKING:

River Stone is suitable for driveways, pedestrianwalkways, patios and light duty traffic.

STANDARDS & PERFORMANCE: River Stone is manufactured in compliance with theperformance levels in BS EN 1338:2003 ConcretePaving Blocks: Requirements and test methods areindependently accredited by BSI.


• Tensile Splitting Strength: >3.6 Mpa




CHAMFER SIZE: River Stone has a sharp edge and no chamfer.

JOINT WIDTH: 60mm: 2mm spacers on each paver leaving a 3mmjoint width when laid.

Note: During installation care should be taken to protect theproduct from wet and dark base sand, dirt and detritus whileremaining construction works are completed. To ensure thepaving remains in good condition, regular cleaning is essentialafter installation.Careful consideration should be given to the selection ofjointing material. Some sand colours may stain the pavingsurface. A&G recommends the use of silver granite sand withour Blackwater paving.

A&G recommend the use of a rubber plate vibrator whenvibrating sand into joints to minimise surface marks.

To create optimum colour blend A&G advise mixing from 3 balesin vertical sections where possible.

PRODUCT DATA:

SIZE (mm): 200x150 150x150

DEPTH: 60mm 60mm

M2 PER PACK: 12.96 12.96

NO. PER M2: 33.3 44.4



COLOURS: BLACKWATER BLACKWATERGLENARM GLENARMSLANEY SLANEY

< River Stone, Blackwater

River Stone, Slaney

35



COUNTRYCOBBLE®

Acheson & Glover

36 37

< Country Cobble, Cashel, Slate & Grey

Country Cobble captures the old world charm of stonesetts associated with so many of our eminent historicalsites. Employing versatile modern paving systems, youcan easily achieve a structured design solution, whichharmonises with traditional environments.

Country Cobble, Burren & Grey

RECLAIMED APPEARANCE THATADDS CHARACTER & HERITAGE

NBS PLUS: Q24 INTERLOCKING BRICK/BLOCK ROADS/PAVINGS: 10, 110, 112, 113 CARBON: 15 - 17Kg CO2 per m2


COUNTRYCOBBLE®

Acheson & Glover

Country Cobble, Cashel

Cashel Killyleagh Slate

Burren Corrib Grey

COLOURS:

Country Cobble, Corrib

Country Cobble, Grey

Country Cobble, Killyleagh

Country Cobble, Cashel & Grey

Country Cobble, Killyleagh & Slate

38 39

PRODUCT DATA:

SIZE (mm): 200x150 150x150 100x150


M2 PER PACK: 12.00m2 11.25m2 12.0m2

NO. PER M2 : 33.3 44.4 66.6

NO. PER PACK: 400 500 800

WEIGHT PER PACK: 1.32 t 1.2 t 1.32 t

COLOURS: CASHEL CASHEL CASHELCORRIB CORRIB CORRIB

KILLYLEAGH KILLYLEAGH KILLYLEAGHSLATE SLATE SLATE

BURREN BURREN BURRENGREY GREY GREY

200x150 150x150 100x150

60mm 60mm 60mm

9.6m2 9.0m2 9.6m2

33.3 44.4 66.6

320 400 640

1.28 t 1.23 t 1.28 t

CASHEL CASHEL CASHELCORRIB CORRIB CORRIB



200x150 150x150 100x150

80mm 80mm 80mm

7.2m2 6.75m2 7.2m2

33.3 44.4 66.6

240 300 480

1.24 t 1.22 t 1.28 t

CASHEL CASHEL CASHELCORRIB CORRIB CORRIB



FEATURES & BENEFITS: Country Cobble’s rumbled edges give an aged, re-claimed appearance with the advantages of an easy-to-lay paving system.

Its blend of colours suits both traditional andcontemporary settings.

Available in various sizes to allow a variety of laying patterns.

Through colour mix.


MANUFACTURE: Country Cobble is manufactured from high grade locallysourced aggregates. Its unique three colour blends areobtained by using the latest computerised mixingsystems.

TRAFFICKING:

50mm and 60mm are ideal for pathways, patios,pedestrian walkways and driveways.

80mm is suitable for heavy vehicular access.


• Tensile Splitting Strength: >3.6Mpa


CHAMFER SIZE: Rumbled finish.

JOINT WIDTH: Country Cobble is butt jointed when installed. The rumbled finish gives an average width joint ofapproximately 2mm.

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the paving remains ingood condition, regular cleaning is essential after installation.Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Slate and Greypaving.



STRADA

Acheson & Glover

40

Created in two colour blends the rumbled finish gives arustic aged appearance. Strada is ideal for conservationareas and equally practical for modern projects.Complementing the overall paving and flag rangeStrada provides more options for your design.

< Strada, Cashel

Cashel Basalt

COLOURS:

PRODUCT DATA:

SIZE: 200x60mm

DEPTH: 60mm

M2 PER BAG: 8.2m2

NO. PER M2: 83.3

NO. PER BAG: 684

WEIGHT PER BAG: 1.05 t

COLOURS: CASHELBASALT

Supplied in tote bags.

NBS PLUS: Q24 INTERLOCKING BRICK/BLOCK ROADS/PAVINGS: 10, 110, 112, 113 CARBON: 16.0Kg CO2 per m2

TRADITIONAL APPEARANCEWITH A RUMBLED FINISH

Strada, Basalt

Strada, Cashel

41

FEATURES & BENEFITS: Rectangular shaped paving product with adistressed, rumbled finish.

Provides an ‘olde world’ appearance to anyproject.

Ideal for winding pathways and subtle detailingin larger areas.

Through colour mix makes Strada a versatileproduct suitable for a variety of applications.

MANUFACTURE: Strada is manufactured from locally sourced high gradeaggregates. By using the latest computerised mixingsystems, we can create Strada’s individual colourblends.

TRAFFICKING:Strada is ideal for pathways, patios and edge detailing.It’s dimensions also make it suitable for areas requiringheavier traffic loads such as private driveways.





JOINT WIDTH: Strada does not have spacers and is butted togetherwhen installed. The rumbled finish gives an averagejoint of approximately 2mm.

Note: During installation care should be taken to protect the product fromwet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the paving remains ingood condition, regular cleaning is essential after installation.Light coloured blocks emphasise tyre marks and oil spills. It must beaccepted that these products will need more maintenance if theoverall appearance is to be maintained.

Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Basalt paving.




42 43

BOULEVARD®

CONTEMPORARY, CLEAN APPEARANCE& TROLLEY FRIENDLY SURFACE

Where a contemporary appearance with clean crisplines is essential, Boulevard is the smart, sharp option.Available in a range of sizes and colour blends,Boulevard gives you freedom and flexibility to createstriking modern designs.

Boulevard, Corrib

< Boulevard, Cashel



BOULEVARD®

Acheson & Glover

44

Burren Cashel Corrib

Killyleagh Slate Grey

COLOURS:

FEATURES & BENEFITS: A flat wearing surface in a range ofcontemporary colours.

Especially suitable as a trolley friendly surface.

The range of sizes can be used to createstriking modern designs.

Sharp edges allow minimal maintenance.

Clean, crisp, modern look.

MANUFACTURE: Boulevard is manufactured from specially sourcedpremium aggregates. Its unique colours are obtainedusing the latest computerised mixing system,creating a spectrum of 3 and 4 colour blends.

TRAFFICKING:

Within our Boulevard range you will find a block sizefor every application, from category I (Heavy Duty

Pavements of between 0.5 - 12msa*) to category IV(Private drives, paths and patios) as outlined in BS7533-2:2001.

Its small plan dimensions or its 80mm thicknessmake it ideally suited for the heavier traffic loadingsof categories I and II.

msa* - Millions of Standard Axles expectedthroughout 20 year design life of pavement.

STANDARDS & PERFORMANCE: Boulevard is manufactured in compliance with theperformance levels in BS EN 1338:2003 ConcretePaving Blocks: Requirements and test methods areindependently accredited by BSI.






CHAMFER SIZE: 60mm / 80mm / Xflo: Pencil round.

JOINT WIDTH: 60mm: 1.5mm spacers on each paver leaving aminimum 2mm joint width when laid.80mm: 2mm spacers on each paver leaving a minimum3mm joint width when laid.

Note: During installation care should be taken to protect the product fromwet and dark base sand, dirt and detritus while remaining constructionworks are completed. To ensure the paving remains in good condition,regular cleaning is essential after installation.

Careful consideration should be given to the selection of jointing material.Some sand colours may stain the paving surface. A&G recommends theuse of silver granite sand with our Slate and Grey paving.

< Boulevard, Burren

Boulevard, Corrib

PRODUCT DATA:

SIZE (mm): 200x150 150x150

DEPTH: 50mm 50mm

M2 PER PACK: 12m2 11.25m2

NO. PER M2: 33.3 44.4



COLOURS: CASHEL CASHELBURREN BURRENSLATE SLATE

KILLYLEAGH KILLYLEAGHGREY GREY

CORRIB CORRIB

200x150 150x150

60mm 60mm

12.96m2 12.96m2

33.3 44.4

432 576

1.75 t 1.75 t

CASHEL CASHELBURREN BURRENSLATE SLATE


CORRIB CORRIB

200x150 150x150

80mm 80mm

9m2 9m2

33.3 44.4

300 400

1.24 t 1.22 t

CASHEL CASHELBURREN BURRENSLATE SLATE


CORRIB CORRIB

45


>>

Also available as

See page 53


RECTANGULAR

Acheson & Glover

46 47

Rectangular, Crieve Mix

CLEAN LINES & A FINETEXTURED FINISH

< Rectangular, Slate

Rectangular is manufactured with a fine textured finishto give a distinctive richness of colour. The lastingdurability of this quality paving will provide a decorativefinish to enhance any traditional or contemporary area,which requires minimal maintenance.

For high visual impact and clean lines,edge with either a complementary orcontrasting colour to achieve the resultyou want.



RECTANGULAR

Acheson & Glover

48

< Rectangular, Slate

Creagh Peat Brindle Crieve Mix Rustic Red

Grey

Slate

Autumn Brown Olde Gold

COLOURS:

PRODUCT DATA:

MACHINE LAYSIZE (mm): 200x100 200x100 200x100


M2 PER PACK: 12.48m2 9.72m2 10m2

NO. PER M2: 50 50 50

NO. PER PACK: 624 486 500

WEIGHT PER PACK: 1.8 t 1.7 t 1.75 t

COLOURS: CRIEVE MIX CRIEVE MIX CRIEVE MIXRUSTIC RED RUSTIC RED RUSTIC RED

SLATE SLATE SLATECREAGH PEAT BRINDLE CREAGH PEAT BRINDLE CREAGH PEAT BRINDLE

GREY GREY GREYOLDE GOLD OLDE GOLD OLDE GOLD

AUTUMN BROWN AUTUMN BROWN AUTUMN BROWN

FEATURES & BENEFITS: Flat wearing surface in a range of colours.

Especially suitable for commercial projectswhere cost is a main consideration.


Suitable for a wide range of applications.

Traditional paved appearance.

Machine lay available.

MANUFACTURE: Rectangular is manufactured from locally sourcedpremium aggregates. Its colour blends are achievedby using the latest computerised mixing systems.

TRAFFICKING:Rectangular can be used for most applications, fromCategory I (Heavy Duty Pavements of between 0.5 –12msa*) to Category IV (Private drives, paths, patiosand pedestrian walkways) as outlined in BS7533-2:2001.

Its 80mm thickness is ideally suited for the heaviertraffic loads of categories I and II.

msa* - millions of Standard Axles expectedthroughout 20 year design life of pavement.

STANDARDS & PERFORMANCE: Rectangular is manufactured in compliance with theperformance levels in BS EN 1338:2003 ConcretePaving Blocks. Requirements and test methods areindependently accredited by BSI.


Tensile Splitting Strength: >3.6Mpa

Slip Potential: Low Slip Potential

Abrasion Resistance: Class 3

Weathering Resistance: Class 3

CHAMFER SIZE: 60mm & 80mm: Standard 5mm straight chamfer.

JOINT WIDTH: 60mm: 1.5mm spacers on each paver leaving aminimum 2mm joint width when laid.

80mm: 2mm spacers on each paver leaving aminimum 3mm joint width when laid.

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the paving remains ingood condition, regular cleaning is essential after installation.

Light coloured blocks emphasise tyre marks and oil spills. It must beaccepted that these products will need more maintenance if the overallappearance is to be maintained.

Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Grey & Slate paving.

49


Also available as

See page 53


XFLO PERMEABLEPAVING SOLUTIONS

Acheson & Glover

50 51

Xflo® permeable paving block systems have been speciallydeveloped by A&G to provide specifiers with an extensiverange of high quality aesthetically pleasing block pavingfinishes and unit sizes combined with the functionalpermeability performance required in a sustainable urbandrainage system (SUDS).

Increased rainfall and unchecked urban developmenthave left conventional storm water drainage systems

unable to cope, resulting in severesurface flooding in many areas of thecountry following periods of intenserainfall.

SUDS such as the range of Xflo®

permeable paving solutions are designedto mimic the natural movement of stormwater and replace conventional stormwater drainage systems.

HIGHLY EFFECTIVE, SUSTAINABLE METHODOF DEALING WITH STORM WATER CONTROL

< Xflo Rectangular, Crieve Mix

< Xflo Rectangular, Slate

Xflo Plaza, Sandstone

Xflo Rectangular, Crieve Mix Xflo Plaza, Slate & Silver

Xflo Rectangular,Crieve Mix & Grey

NBS PLUS: Q24 INTERLOCKING BRICK/BLOCK ROADS/PAVINGS: 12, 115, 117, 119BS EN: 1339:2003CARBON: 26.9Kg CO2 per m2


XFLO PERMEABLEPAVING SOLUTIONS

Acheson & Glover

52

RECTANGULAR

Creagh Peat Brindle Crieve Mix Rustic Red Grey Slate

Silver Graphite Slate Sandstone

PLAZA

BOULEVARD

Burren Cashel Killyleagh Grey Slate

COLOURS:

53

FEATURES & BENEFITS: Highly effective permeable paving blocks. Offers a variety of surface finish options to forman integral part of SUDS (Sustainable UrbanDrainage System). All products perform to the standards expectedbut each one offers different aesthetics.Suitable for areas of heavy traffic.Machine lay available in Xflo Rectangular.

MANUFACTURE: Xflo Rectangular and Xflo Boulevard are manufacturedfrom locally sourced premium aggregates.

Xflo Plaza is manufactured from specially selected granite aggregates.

TRAFFICKING:

Xflo 80mm is suitable for areas of traffic from CategoryI (Heavy Duty Pavements of between 0.5-12 msa*)Category IV (private drives, paths and patios) asoutlined in BS 7533-2: 2001.

The small plan dimensions and 80mm thickness makeit ideally suited for the heavier traffic loading ofCategories I and II.

msa* - millions of Standard Axles expected throughout20 year design life of pavement.


Xflo is manufactured in compliance with theperformance levels of BS EN 1338:2003 ConcretePaving Blocks. Requirements and test methods areindependently accredited by BSI.

• Tensile Splitting Strength: > 3.6 Mpa




CHAMFER SIZE: Xflo Plaza and Xflo Boulevard - pencil round.Xflo Rectangular - standard 5mm straight

JOINT WIDTH: 3.25mm by 2 no. spacers leaving a minimum 7mmjoint when laid.

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the paving remains ingood condition, regular cleaning is essential after installation.Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface. A&Grecommends the use of silver granite sand with our Silver, Slate, Greyand Graphite paving.

PRODUCT DATA:

PRODUCT:SIZE (mm):

DEPTH:

M2 PER PACK:

NO. PER M2 :

NO. PER PACK:

WEIGHT / PACK:

COLOURS:

200x100 200x100

80mm # 60mm

10.56m2 12.48m2

50 50

528 624

1.8 t 1.8 t

AS ABOVE AS ABOVE

# Machine lay available

RECTANGULARPLAZA255x170 / 170x170

80mm

9.6m2

Mix of 2 sizes in pack

270

1.75 t

AS ABOVE

BOULEVARD255x170 / 170x170

80mm

9.6m2

Mix of 2 sizes in pack

270

1.75 t

AS ABOVE


>>

NEW DEPTH:60mm

Xflo Rectangular

NBS PLUS: Q10 KERBS/EDGINGS/CHANNELS/PAVING ACCESSORIES: 150 BS EN: 1339:2003CARBON: 19.0Kg CO2 per m2


CIRCLES

Acheson & Glover

55

Burren Cashel Slate

COLOURS:

Create a focal point, add extra appeal or indulge your creativeinstincts with a unique design touch… a decorative pavedcircle does it all. Circle Packs are available in a choice ofcolours and are available in rumbled and non-rumbled finishes.

Now it's easy to achieve a modern attractive feature withoutthe need for unsightly cuts to give a pristine design finish.

PRODUCT DATA:

DEPTH: 60mm

RADIUS: 1.55m

DIAMETER: 3.1m

NO. PER PACK: 1 Kit


COLOURS: BURRENCASHELSLATE

FINISH: RUMBLEDNON-RUMBLED

Rumbled Circle, Slaney

CREATE DRAMATICEFFECTS WITH OURCIRCLE SETTS

NBS PLUS: Q24 INTERLOCKING BRICK/BLOCK ROADS/PAVINGS: 10, 110, 112, 113 CARBON: 17 - 18Kg CO2 per m2

SETTS

Setts are ideal for bordering any paving or flagged area and will adddefinition to any landscaped area.

PRODUCT DATA:

SIZE: MIXED SIZES + MIXED SIZES +

DEPTH: 50mm 60mm

M2 PER BAG: 10.5m2 10.4m2

NO. PER M2: N/A N/A

NO. PER BAG (approx.): 1750 1750

WEIGHT PER BAG: 1.22 t 1.32 t

COLOURS: CASHEL CASHELSLATE SLATE

+ Setts are supplied in tote bags with approximatelyequal quantities of each size: 100x75 / 90x75 / 75x75 / 50x75mm.

Country Cobble, Cashel and Setts, Slate

FEATURES & BENEFITS: Setts are ideal for bordering any paving or flagged area.

Adds definition and detail to any landscaped area.

Setts can be laid in rows - double, triple width, etc.

Through - colour mix.

Can be driven on.

MANUFACTURE: Setts are manufactured from high grade locally sourcedaggregates. Its colour blends are obtained by using thelatest computerised mixing systems.

TRAFFICKING:

50mm and 60mm are ideal for pathways, patios,pedestrian walkways and driveways.


• Tensile Splitting Strength: >3.6Mpa



JOINT WIDTH: Setts are butt jointed when installed. The rumbled finish gives an average width joint ofapprox. 2mm.

Note: During installation care should be taken to protect theproduct from wet and dark base sand, dirt and detritus whileremaining construction works are completed. To ensure the pavingremains in good condition, regular cleaning is essential afterinstallation.Careful consideration should be given to the selection of jointingmaterial. Some sand colours may stain the paving surface.

TRADITIONALAPPEARANCE WITHA RUMBLED FINISH

Cashel Slate

COLOURS:

Tote bags contain all four sizes.

110x75mm

50x75mm

75x75mm

90x75mm

Sizes

54

FEATURES & BENEFITS: Two finishes - rumbled and non-rumbled.

Will enhance the look of practically any area.

Complements most ranges of A&G’s paving andflags products.

Diameter can be further extended using CountryCobble Setts.

Each pack contains a template to assist with laying.

Can be driven on.

MANUFACTURE: Circles are manufactured from specially sourcedpremium aggregates. Their unique colours are achievedby using the latest computerised mixing system to createa spectrum of three and four colour blends.

TRAFFICKING:Circles are suitable for pedestrian traffic such as patiosand its dimensions also make it ideal for areas requiringheavier traffic loads such as driveways.

STANDARDS & PERFORMANCE: Circles are manufactured in compliance with theperformance levels in BS EN 1338:2003 Concrete PavingBlocks: Requirements and test methods areindependently accredited by BSI.






JOINT WIDTH: There are no spacers. Each element has straight edges.Due to the radius of each circle joint widths will vary.

Note: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the circle remains ingood condition, regular cleaning is essential after installation.Light coloured blocks emphasise marks and oil spills. It must beaccepted that these products will need more maintenance if theoverall appearance is to be maintained.

A&G recommends the use of silver granite sand with our Slate circle.

A template comes with each Paving Circle Packto assist with laying.



Acheson & Glover

NBS PLUS: Q10 KERBS/EDGINGS/CHANNELS/PAVING ACCESSORIES: 150 BS EN: 1340:2003CARBON: 3.4 - 7.3Kg CO2 per m2


56 57

KERBS & STEPS

Kerb / Wall Unit

Colours & Sizes

Colour CASHEL, SLATE

Size L200 x D80 x H150mm / 8x3x6”

Finish RUMBLED

No specials required for internal or external corners.

Kerb / Wall Unit looks smartwith Country Cobble as analternative to the RumbledBullnose Kerb Setts.

Bullnose Kerbs are available inattractive colours and twofinishes, to complement orcontrast with our full range ofpaving and flags. The clean, non-rumbled finishpairs well with Boulevard,Rectangular and TerraPave®,while the rumbled finish is agood match for CountryCobble®. A full range of cornerunits can also be provided.

Bullnose Kerb Setts

Dwarf Wall Kerb

Colours & SizesColour GREYSize H380 x D90 x L915mm / 15 x 3.5 x 36”

Colours & SizesColour

Sizes H150 x D50 x L915mm / 6 x 2 x 36”H150 x D75 x L915mm / 6 x 3 x 36”H200 x D100 x L915mm / 8 x 4 x 36”

Finish SmoothTextured

Colours & SizesColour GREYSize H150 x D75 x L915mm / 6 x 3 x 36” Bullnose

H200 x D100 x L915mm / 8 x 4 x 36” BullnoseH255 x D127 x L915mm / 10 x 5 x 36” Square Edge

Bullnose Kerb

Reconstituted Granite Kerb

Colours & SizesColour GREYSize H150 x D50 x L915mm / 6 x 2 x 36”Round Top Kerb also available

Colours & SizesColour GREY, SANDSTONE, SLATESize H200 x D100 x L915mm / 8 x 4 x 36”

Half Batter Driveway KerbFlat Top Garden Edging Kerb

GREY SLATESANDSTONE

200x127x127mm 200x127x127mm200x127x100mm127x200x200mm 127x200x200mm127x200x100mm

LOW RISE HIGH RISE

A&G supply a range of kerbs, available in attractivecolours to complement or contrast with our full rangeof paving & flags.

Bullnose Kerbs or the Kerb / Wall Units are ideal whenforming steps and raised areas. Both types are available

in attractive colours to complement or contrast withour full range of paving and flags. A contrastingcolour gives the step greater impact. As Bullnose Kerbsare 100mm wide, they are ideal for circular steps. Youcan also use a paving unit to form a riser.

Reconstituted Granite Flags coordinatewith TerraPave® Flags. Available in a Greycolour, they have a textured top and frontface and are available as a bullnose kerband a square edged kerb.

COMPLEMENTING OUR FULL RANGEOF PAVING & FLAG PRODUCTS

A wider range of smooth and texturedpressed kerbs, round top and flat topedging kerbs, dropper kerbs, radius kerbs,quadrant kerbs, channel kerbs andpressed road kerbs are available.

Please ask our Specifications Managersfor more information.

Colours & Sizes

Colour CRIEVE MIX, SLATE

Size BULLNOSE KERB H200 x D127 x L100mm / 8 x 5 x 4”

EC HIGH RISE H200 x D127 x L127mm / 8 x 5 x 5”

IC HIGH RISE H200 x D127 x L127mm / 8 x 5 x 5”

EC LOW RISE H127 x D200 x L200mm / 5 x 8 x 8”

IC LOW RISE H127 x D200 x L200mm / 5 x 8 x 8”

Finishes RUMBLEDNON-RUMBLED

EC External Corner IC Internal Corner



MACHINE LAYWithin the industry there's growing pressure on contractprogrammes. More than ever speed is of the essence. As aresult, the safe, effective, streamlining of paving operations isnow a real priority.

Due to recent major advances in machine laying, thismethod is now becoming widely used. In fact, machinelaying has now demonstrated its competitive advantages interms of cost and productivity. As only dry constructioncomponents are involved, installation can take place inalmost all weather conditions. Completed areas are readyfor immediate use, with no curing times.

• Typical laying rates of 300m2 per machine per day can be achieved depending on siteconditions, rising to exceptionally high rateswhen several machines are working in unison

• Cost effective with a highly durable finish

• Area available immediately after completionwith no curing times

• Suitable for straightforward runs over 600m2

• Retrospective services can be put in to a pavedarea and paving re-instated without ‘scarring’the aesthetics of the surface area

COMPLEMENTARYPRODUCTS

Acheson & Glover

58 59

SPACERSImportant to use with flags where no spacer nibs are

incorporated into the product. Spacers ensure accurate

joint width and protection from damage due to product

contact. Various sizes can be provided to special order.

PEDESTALSPedestal systems are designed to support paving products

on roof terraces, roof gardens, platforms and other raised

areas. They resolve an array of design issues, from

protecting waterproof membranes, to disguising exposed

surfaces, to providing a useable roof deck. Pedestals are

available in heights up to approximately 600mm. Contact

our Technical Department to discuss your plans.

RECESSED MANHOLE COVERSHide unsightly concrete or aluminium manhole lids.

Recessed manhole lids can be used with the full paving and

flags range, available in sizes 450x450mm and 450x600mm.

DECORATIVE GRAVELCreggan Blend is a combination of pink and grey gravel,

which can enhance any garden setting or driveway.

A&G can supply a number of complementary paving products forthe industry, which include: recessed manholes, decorative gravel,spacers, pedestals and jointing sand.

Silver Flagging SandDried Sand

JOINTING SANDAn essential part of any flexible pavement. Specially

selected for its quality grading, kiln dried sand is provided

in 25kg bags. Silver granite flagging sand is also available to

complement our paving and flags range.

TECHNICAL INFOLaying Patterns 62

British & European Standards 65

Design & Installation Guidance 66

How to Specify 67

Design Support 67

BREEAM 68

Maintenance Guidance 69

Health, Safety & The Environment 70


60 61



63

Acheson & Glover

62

PLAZA PAVING

RECTANGULAR

Stretcher Bond (1 size)

This pattern uses 300x150mmblocks.

Stretcher Bond (2 sizes)

This pattern uses 300x150mmand 150x150mm blocks.

Stack Bond (1 size)


450 Herringbone 900 Stretcher Bond Basket Weave.900 Herringbone

This pattern can be used to lay MachineLay Rectangular paving blocks.

900 Stretcher Bond450 Herringbone900 Herringbone

STRADA

STRETCHER BOND: Plaza, Silver

HERRINGBONE: Strada, Cashel

LAYING PATTERNSCOUNTRY COBBLE® / BOULEVARD® / RIVER STONE

Random Coursed (2 sizes)

This pattern uses 200x150mmand 150x150mm blocks.

Random Coursed (3 sizes)

This pattern uses 200x150mm,150x150mm and 100x150mmblocks. NB: Country Cobble only.

900 Herringbone (1 size)


Stack Bond (1 size)


Courtyard Pattern A (2 sizes)

This pattern uses 200x150mmand 100x150mm blocks.NB: Country Cobble only.

Courtyard Pattern B (2 sizes)

This pattern uses 200x150mmand 100x150mm blocks.NB: Country Cobble only.

Courtyard Pattern B (3 sizes)

This pattern uses 200x150mm,150x150mm and 100x150mmblocks. NB: Country Cobble only.


This pattern uses 200x150mm.

STRETCHER BOND: Boulevard, CashelCOURTYARD PATTERN A: Country Cobble, Corrib

64

TERRAPAVE® / CANTERRA® / BEVELLED / RIVEN / PLAZA FLAGS


Uses 600x400mm flags.

Stretcher Bond (2 sizes)

Uses 400x400mm and600x400mm flags.

Stack Bond (1 size flag)

Uses 400x400mm flags.

Broken Stack Bond (1 size flag & setts)

Uses 400x400mm flags and Country Cobble setts.

315m

m31

5mm

315m

m

420mm 525mm 315mm

525mm420mm315mm

315mm315mm210mm 420mm

Each bale is packed in layers (as above).

(3 la

yers

dee

p)

(3 layers wide)

After flags have been swopped

Before flags have been swopped

REPEAT PATTERN (uses all 4 sizes)

To ensure the vertical joints between flagsdon’t line up with those in the row above /below, swap 2 flags from each layer asshown. This will create a continuouspattern of staggered joints - as shown onthe left of the diagram.

Each bale contains 130 flag unitsof assorted sizes: 210x315mm x13 no. 315x315mm x52 no. 420x315mm x39 no. 525x315mm x26 no.

Each layer contains 1.2m2: 210x315mm x1 no. per layer315x315mm x4 no. per layer420x315mm x3 no. per layer525x315mm x2 no.per layer

REPEAT PATTERN: Manor Stone, Blackwater

Acheson & Glover www.acheson-glover.com

65

BRITISH & EUROPEANSTANDARDS

MANUFACTURING STANDARDS & TESTING REQUIREMENTS

BLOCK PAVING: FLAGS: KERBS:

European Standard BS EN 1338:2003 BS EN 1339:2003 BS EN 1340:2003

STRUCTURAL DESIGN: BLOCK PAVING: FLAGS:

Light Traffic (<0.5msa) BS 7533-2:2001 BS 7533-8:2003 Flexible BaseBS 7533-12:2006 Bound Base

Heavy Traffic (0.5 – 12 msa) BS 7533-1:2001 N/A

Ports B.P.A N/A

Airports C.A.A N/A

CODE OF PRACTICES FOR CONSTRUCTION

BLOCK PAVING: FLAGS: KERBS:

BS 7533-3:2005 BS 7533-4:2006 BS 7533-6:1999

TYPICAL GRADING FOR LAYING COURSE SAND AND JOINTING MATERIAL

PERCENTAGE BY MASS PASSING

BS SIEVE SIZE CATEGORY IA CATEGORY IB CATEGORY II CATEGORY III CATEGORY IV

5.00mm 90 to 100 90 to 100 90 to 100 89 to 100 89 to 100

2.36mm 75 to 100 75 to 100 75 to 100 65 to 100 65 to 100

1.18mm 55 to 90 55 to 90 55 to 90 45 to 100 45 to 100

600um 35 to 65 35 to 65 35 to 65 25 to 80 25 to 80

300um 10 to 45 10 to 45 10 to 45 5 to 48 5 to 48

150um 0 to 10 0 to 10 0 to 10 0 to 15 0 to 15

75um 0 to 0.3 0 to 0.5 0 to 1.5 0 to 3 0 to 5

LAYING COURSE SAND AND APPLICATION

SAND CATEGORY: APPLICATION:

IA Aircraft pavements / Bus stationsPavements with severely channalized traffic

IB Industrial pavements / Loading Bays

II Adopted Highways / RoadsPedestrianisation schemes with regular heavy trafficCar Parks with some heavy vehicles

III Pedestrian schemes receiving only occasional heavy trafficCar parks with no heavy vehicles

IV Private Drives / Pedestrian FootwaysFootways with occasional vehicle overrun

CE MARKING

In line with legislation requirements, allA&G paving and flag products are CEmarked. A Declaration of Performance(DOP) for each product can bedownloaded from our website:

www.acheson-glover.com/cemarking

BE UP TO STANDARD

To be confident your pavement designmeets the most stringent quality standards,before choosing products, consult theDesign Information available in BS 7533Parts 1 and 2 for block paving; Parts 8 and 12 for flags; Part 13 forpermeable pavements, which refers to thedesign of pavements for heavy and lightduty traffic.

These codes of practice have been writtenusing information derived from extensiveresearch and cover pavement design for allsituations.

All A&G products are manufactured tofulfill industry standards, and we canadvise you on the best choices.

PASSES ALL THE TESTS

A&G’s paving and flags are produced andtested to the relevant and current BritishStandards. Testing is carried out both in-house and at accredited independenttesting laboratories. For copies of all testresults, please speak to one of ourSpecifications Managers.

With all products, tolerances are allowedwithin the manufacturing standards.Please refer to the relevant standard whenassessing permittable tolerances.

LAYING COURSE SAND

As our experience of paving hasincreased, our understanding of therequirements for laying course materialshas been honed. Laying course materialsshould be naturally occurring sands fromthe quaternary geological series or seadredged sands, and should not containcement. Other materials includingcrushed rock should be used only forCategory IV applications.

DESIGN & DETAILING

Concrete block and flag pavements should be designed in accordance with the relevantsection in BS 7533.

MANOR STONE®


HOW TOSPECIFYFull technical specifications for all paving and flagsproducts are available to download from our website.


A&G is a member of the RIBA and RIAI CPDProviders Network and in-house presentations canbe undertaken, by prior arrangement.

A&G is a member of the NBS PlusService. See each product page forNBS specifications.

DESIGNSUPPORTA&G can offer a design and advice service for all ourpaving and flag products.

Our Technical Department works closely with strategicpartners to provide specific expertise in designingpermeable pavements and retaining walls.

We can offer levels of support fromconcept design and advice right up tofully indemnified engineered designs.

To learn more, please call one of oursales offices and ask to speak to one ofour Specifications Managers.

Acheson & Glover

66 67

DESIGN & INSTALLATIONGUIDANCEPAVEMENT DESIGN

Pavement Design

The long-term performance of any concrete block or flagpavement is affected by the following parameters:-

1) The plan size, thickness and properties of the surfaceproduct;

2) The thickness and properties of the (sand) beddinglayer;

3) The thickness and properties of the sub-base layer;

4) The strength and properties of the sub-grade(underlying ground conditions);

5) The frequency and intensity of the (traffic) loading.

To ensure that the concrete block or flag pavementperforms well throughout it’s whole design life thedesigner should refer to the relevant section in BS 7533to obtain the correct design method.

Helpful guidance notes (based upon BS 7533) forarchitects, consulting civil engineers and other specifierscan be downloaded from the Interpave website:www.paving.org

Edge Restraint

Edge restraints capable of resisting designed trafficloadings, including constructional loadings, should beprovided to prevent loss of laying course material andresist lateral movement of flags / paving.

LAYING OF FLAGS

Laying Course

As a general rule flags in excess of 450 x 450mm are laidon a mortar bed with those less than 450 x 450mm laidon a sand bed. Where vehicular overrun is expected, theflexible bedding method must be employed.

(A) Mortar Bedding: (Rigid Construction)

Laid to line and level using a paviours maul, on acompacted full bed thickness of 25mm for load categoryIV, freshly mixed, moist 1:3 cement-sand mortar(proportions by volume) OR 1:3 lime-sand mortar(proportions by volume) should be used. Any rockingflags should be lifted and rebedded. Retarded, plasticizedand pre-mixed mortars are permitted but any layingcourse mortar which has begun to set should be replaced.

(B) Sand Bedding: (Flexible Construction)

The laying course material should be naturally occurringsand graded in accordance with the Table on page 65.Moisture content should be as uniform as possible andthe material moist without being saturated.

For load category IV, a compacted laying course depth of25mm is acceptable (with the top 10mm loosened usinga rake).

A&G recommend spacers are used to ensure joint widthis maintained.

TerraPave®, Rimini & Florento Ground

Acheson & Glover

MAINTENANCE GUIDANCERegular maintenance and good cleaning practice will not only enhancethe overall appearance of the paving but may help to prevent againstslips, trips and falls. Removing surface contamination will help tomaintain the required level of slip resistance for the floor surface.

Cleaning of paving: general dirt and detritusTo avoid the build up of detritus, general dirt and grime, surfaces should bewashed with a brush and water (light detergent).

To remove general dirt and detritus, regular brushing is recommended. Forlarger areas mechanical sweepers and scrubber-drier machines can be used.

Where possible, low pressure tyres should be fitted to reduce the risk ofbreaking or cracking flags, Polypropylene, rather than wire, brushes should beused and finally brush and suction pressures should be set to the minimumrequired. Mechanical sweeping of block pavements should be avoided in theearly life of the pavement and until the joints have sealed with detritus.

Water jetting equipment is not recommended as it is likely to wash out thejointing material and may damage the surface of the block or flag paving.

Tough stains and other contaminants may require more intensive cleaning andthe use of proprietary products.

Maintenance of jointsJointing material may be lost during the early life of the pavement in both dryand wet weather; being blown away in the dry and washed from the surfaceduring heavy rain. It is therefore important to inspect areas of new pavingregularly in their early life and top up joints with suitable material as needed.

EfflorescenceAll quality paving products, which have a high cement content, may suffer fromefflorescence or lime bloom. Lime bloom is a chemical reaction between cementand water. A product of this reaction is calcium hydroxide, 'lime,' which is slightlysoluble in water. Under certain conditions it can migrate through damp concreteto the surface where it in turn reacts with atmospheric carbon dioxide toproduce a deposit of calcium carbonate crystals. This deposit is normallyextremely thin, and when wet becomes transparent and seems to disappear.

The occurrence of lime bloom on the surface of concrete paving products is aspasmodic and unpredictable phenomenon not associated with poor qualitymanufacture. Lime bloom forms more readily when concrete becomes wet anddries slowly; therefore occurrences are more frequent in winter months.Generally it only occurs in the early life of concrete paving products, andmaterials which have been in place for a year or more, without experiencinglime bloom, are unlikely to be affected.

The phenomenon is temporary and superficial and will generally disappear intime without affecting concrete strength or durability. Efflorescence is in no waydetrimental to the performance of the product and the manufacturer cannotaccept responsibility for this natural occurrence. The best action to deal withefflorescence is to ‘let nature take its course.’

Contact one of our Specifications Managers for further details.


68 69

BREEAM

BREEAM - Building Research Establishment'sEnvironmental Assessment Method, is the most widelyused environmental assessment method for buildings. It sets the standard for best practice in sustainabledesign and has become the de facto measure used todescribe a building's environmental performance. Everybuilding is assessed in 9 different categories evaluatingthe design, materials used and construction methodsgiving a comprehensive record of any building'senvironmental credentials.

The Code for Sustainable Homes covers domesticbuildings, while there are BREEAM guides for all otherbuilding categories, Courts, Education, Industrial,Healthcare, Offices, Retail, Prisons.

Code for Sustainable Homes

Specifying Xflo as part of a sustainable drainage systemcan help maximise credits in the following areas:

Aims of BREEAM:

• To mitigate the impact of buildings on theenvironment;

• To enable buildings to be recognised accordingto their environmental benefits;

• To provide a credible environmental label forbuildings;

• To stimulate demand for sustainable buildings.

BREEAM ratings are specific to individual buildings. Theabove section provides an indication of areas where Xflomay help to achieve additional credits. It is up to thedesigner to assess the building under consideration andsatisfy themselves that Xflo will help to improve therating in that situation.

A&G’s concrete paving and flags are rated ‘A’ underthe BRE Green Guide to specification.

A&G’S CONCRETE PAVERS AT ‘A’ EXCEEDMOST NATURAL STONE PRODUCTS ANDWHEN USED IN CONJUNCTION WITH THERELEVANT RECYCLED GRANULAR BEDDINGAND JOINTING MEDIUMS CAN ACHIEVE ANA+ RATING.

To learn more on BREEAM visit:

www.breeam.org

www.thegreenguide.org.uk

EXAMPLE

CATEGORY: ISSUE DESCRIPTION: AVAILABLE HOW XFLO ID: CREDITS: HELPS:

2:Water Wat 1 Indoor Water Use 5 Facilitates the collection ofrainwater for use in the home.

2:Water Wat 2 External Water Use 1 Facilitates the collection of rainwater for use in irrigation.

4: Surface Sur 1 Management 2 Prevents excessive run-off from water run-off Of Surface Water the site keeping run-off into

Run-off From water courses at pre developmentDevelopments levels.

NOTES

COLOURS & FINISHESThe colours shown in this literature are as accurate as the printingprocess will allow. Whilst every effort is made to match coloursand represent textures, we recommend that colours and texturesare chosen from actual samples of the products. All products aremanufactured from natural materials and although we strive toprovide consistency of colour, variation may occur in themanufacturing process. It is for this reason that we recommendthat products are selected from at least three bales, within eachdelivery. This will eliminate 'banding'.

GENERAL

All information contained in this brochure is correct at the time ofgoing to print. We recommend that you contact our sales staff forfurther information at the design stage of your project for themost up to date information. A&G reserves the right todiscontinue products if necessary.

TerraPave®, Pollensa & Sorrento Ground & Boulevard®, Cashel


‘Green’ Facts for A&GA&G have an internal environmental management system. Concrete paving andflags are rated ‘A’ under the Green Guide. Xflo can be used as part of a SUDSsystem. 75% of the water used to grind TerraPave® is recycled. Our Toome plantuses environmentally friendly mixers which re-use washing water for the mixingprocess.

A&G recognise that the activities of the organisation couldpotentially have a significant impact on the environment. In order to minimise this impact, we take a proactive rather thanreactive stance on environmental issues. In recognition of theseefforts, we have won a number of environmental awards.

ISO 14001CERTIFICATIONBS EN ISO 14001 is a comprehensive toolthat provides all industry with a way ofcontrolling environmental impacts. A&Gwere awarded certification for a multi-sitemanagement system (across 8 NImanufacturing sites and 3 quarries) thatdocuments environmental impactsincluding: Energy Waste, Production Waste and Carbon Emissions.

OHSAS 18001CERTIFICATIONOHSAS 18001:2007 is an internationaloccupational health and safetymanagement system that provides aframework to control health and safety risksand improve the health and safety ofemployees.

A&G was awarded certification because ofthe high standards of safety awarenessacross all of its operations.

Design professionals can trust that A&G willalways apply best practice in terms of healthand safety.

THE GREENORGANISATIONA&G have been awarded Bronzemembership status within The GreenOrganisation, one of the country's leadingenvironment groups. Membership isrestricted to companies, councils andcommunities that can demonstrate theeffective measures that have beenintroduced for environmental benefit andA&G was awarded the distinction of Bronzemembership status as a result of its activelyadopting measures that will continue toimprove their environmental performancefor generations to come.

GOOD PRACTICECOMMITMENTS• Water management and recycling.

• Recycling and reuse of aggregates.

• Dust suppression in operation for plantmovement, production processesincluding crushing and screening.

• Developing markets for by-products.

• Adoption of noise suppression andreduction techniques.

• Implementation of waste managementsystems in place across all locations.

• Energy conservation projects.

• Site restoration and aftercare.

• Landscaping and improved visual amenity.

• An “environmental operative” is in placeat all locations. This role encompasses allaspects of the environment. Ensuring thatthe company is adhering to our legislativerequirements.

• A Manager dedicated to environmentalmatters.

CORPORATE SOCIALRESPONSIBILITYA comprehensive social responsibility policyillustrates A&G’s commitment to operatingto the highest standards in every aspect of itsbusiness. We aim to run our businessethically, achieving environmentalstewardship to industry best practice, strivingto manage activities in a safe mannerprotecting the health and safety of everyoneinvolved and encouraging social inclusion inthe communities in which we operate.

SUSTAINABILITYA&G is one of the most innovative andprogressive concrete manufacturingcompanies in the UK and Ireland and hasinvested significantly in modern technology.

Our commitment to positive environmental,social and economic performance is visiblethrough the continuous assessment of ourproducts and their environmental impact.

RESTORATIONWaste material that cannot be recycled backinto the production process is used as an aidto restoration at our sites. It helps to re-landscape and restore parts of our sites nolonger used for production purposes.

ENVIRONMENTALA&G have designated ‘Care of theEnvironment’ as an essential part of thebusiness strategy. We would seek to supportthe Government’s environmental aims byadopting, where possible, Best AvailableTechniques Not Entailing Excessive Cost(BATNEEC).

We will take into account environmentalissues when designing managementsystems, organisational structures andcommunication systems.

CONTROL OF THE WORKINGENVIRONMENTAny industrial process can lead to pollutionof the surrounding environment andatmosphere. In the quarrying and concreteproduct manufacturing industry, ourprocesses involve blasting raw aggregate,crushing, screening, washing and finally thevarious production processes to create ourextensive product ranges. Dust is the mainenvironmental hazard within our plants.

In recognition of this the Company hasdeveloped an Environmental Policy, whichoutlines the Company’s commitment to theenvironment.

• Dedicated environmental operative oneach of our 12 manufacturing sites,responsible for dust control, monitoring siltdischarge and ensuring company meetsrequirements of IPC (Industrial PollutionControl) licence requirements

• Train staff to ensure that the workforceunderstands the environmental impact ofboth the individual and company activities,and environmental policy commitments

• Actively promote the communication ofissues concerning the environment to staff,suppliers and customers.

WASTEMANAGEMENT & DISPOSALOur objective is to eliminate, reduce, reuseand where possible recycle all forms ofcompany waste. By doing this it is possiblefor us to improve our environment,maintain a safe and healthy workplace forour employees, increase operationalefficiencies and achieve savings.

Eliminating the generation of waste at itssource are prime considerations in all plantoperations. The company is committed toidentifying and implementing wastereduction opportunities throughencouragement and involvement of its employees.

HEALTH, SAFETY & THE ENVIRONMENT

ENVIRONMENTALAWARDSInternational Green Apple Award -Pomeroy Quarry for the White ClawedCrayfish Habitat (now an arc site).

Environmental Award Scheme - Recycling.

Gold Standard, HSENI - FivemiletownQuarry and Production facilities inrecognition of its commitment to Healthand Safety.

Hard Rock Quarry of the Year Award -Belcoo Quarry at the prestigious Plant &Civil Engineer magazine’s ‘Plant,Construction & Quarry awards.

Environmental Award - Belcoo Plant atNorthern Ireland’s prestigious BelfastTelegraph business awards.

Green Hero Award - Granulated LimePlant in Belcoo and Manufacturing Facilityin Dungannon at National Green AppleEnvironmental Awards.

Green Champion of Ireland - GranulatedLime Plant in Belcoo at National GreenApple Environmental Awards.

Gold Award - Dungannon Plant forSustainable Urban Drainage System.

National Green Champion for NorthernIreland Business - White-clawed Crayfishproject in Pomeroy at the National GreenApple Environmental Awards.

QPA Water Management Award -Dungannon Plant in the Quarry Productsfor Northern Ireland scheme.

QPA Dust Reduction Award - MagherafeltPlant in the Quarry Products for NorthernIreland Environmental Awards Scheme.

Biodiversity Project of the Year - A jointinitiative with Ballinderry RiverEnhancement Association to protect aglobally threatened species - the White-clawed Crayfish, which live in theBallinderry River and Lough NeaghWetlands at the Sustainable IrelandEnergy, Environmental & WasteManagement Awards.

70 71

FOR MORE DETAILED INFORMATION PLEASE DOWNLOAD A COPY OF OURENVIRONMENTAL BOOKLET AT: www.acheson-glover.com/downloads

Contact Us

GREAT BRITAINT: +44 (0)28 8778 [email protected]

IRELAND (NI & ROI)T: +44 (0)28 8952 [email protected]


PAVING & FLAGS · a world of inspiring possibilities. Because they are strong, weatherproof,...

Documents

Transcript of PAVING & FLAGS · a world of inspiring possibilities. Because they are strong, weatherproof,...