PAVEMENT TOOL MANUFACTURERS, INC · PAVEMENT TOOL MANUFACTURERS, INC. Manufactured with pride in...
Transcript of PAVEMENT TOOL MANUFACTURERS, INC · PAVEMENT TOOL MANUFACTURERS, INC. Manufactured with pride in...
PAVEMENT TOOL MANUFACTURERS, INC.
Manufactured with
pride in the U.S.A.
Visit our website and shop at our store online
at www.pavementtool.com
Phone: 1-800-345-7969
Fax: 903-754-7533
E-mail: [email protected] 2012 Catalog
25 Years of Quality service Over
Pour Pot– Hand Held 1
Pour Pot on Wheels 1
Banding Machine 1
Crack Squeegees, “V” Style 2
Crack Squeegees, “U” Style 2
Crack Squeegees, Heavy Duty, “V”&”U” 3
Crack Hoes 3
Foam Bedding Applicator 3
Asphalt Depth Gauge 3
Asphalt Hand Tampers 4
Pavement Scrapers 4
Asphalt Lute/Rakes 5
Asphalt Lute/Screed 6
Steel Asphalt Rake 7
Asphalt Shoes 8
Spray Tips 7-8
AS-Series Squeegees 9
MS-Series Squeegees 10
AS & MS Squeegee Replacement Parts 11
Parking Lot Squeegees 12
Car Stop Squeegees 12
Driveway Squeegees 12
Brushcoaters 13
Tool Contents
Poly Street Broom 13
Wire Street Broom 13
Oil Spot Broom 13
Aluminum Handles 14
Aluminum Handle Assemblies, for brooms &
brushes
14
Hardwood Handles & Brace Kits 14
Parking Lot Protractor 14
Measuring Wheels 15
Stencil Tray, 4 inch 15
Asphalt Tools
Seal Coating Tools
Street Brooms
Handles & Handle Kits
Miscellaneous Tools
Replacement Parts
Pre-Marked Layout Tape 16
Chalk Lines 16
Layout Crayons & Holder 16
Layout Chalk 16
Barricade Tapes 16
Stripers Aids
Brace Kits 17
Mounting Kits 17
Hardware Kits 17
Handles 18
Aluminum Handle Assembly 18
Discontinued Products Last Page
Stencil Contents
Stencil Kits 20
Handicap Symbols 20
Arrows Kits 20
Rail Road 21
Pedestrian/Crosswalk Stencils 21
& more 21
Symbol & Kits
Environmental Health Stencils
Business/Home Improvement/Decoration Kits
Stencil Information 19
Pavement Tool Plastic Stencil Material
-Plastic Sheets
Recycling Stencils 21
22
Floor Warning Stencils 22
Cars - Bikes - Motorcycle Stencils 22
Athletic Stencils
Maps
31-32
29-30
30
Wording Stencils, Number & Alphabet
Kits & Individual Characters
2” 24 18” 25
3” 24 24” 26
4” 24 36” 27
6” 24 42” 27
8” 24 48” 28
10” 24 72” 28
12” 25 96” 28
Description Page Description Page
Stencilocs 23
Brass Interlocking Stencil Kits 23
POUR Pots—Hand Held
2.6 gallon capacity
7/8” ball-to-taper seat valve
Nozzle reduced to 3/8” NPT
Product #
CP-3
Description
POUR POT WITH LEGS
2.6 gallon capacity
7/8” ball-to-taper seat valve
Nozzle reduced to 3/8” NPT
Product #
CP-3A
Description
POUR POT WITHOUT LEGS
Pour Pot on Wheels
2.6 gallon capacity
7/8” ball-to-taper seat valve
Nozzle reduced to 3/8” NPT
2 1/2” diameter silicone squeegee
6” diameter steel disc wheels
Product #
CP-3W
Description
Replacement Parts
1
Product #
CP-SS 1/4” thick x 1-14” tall x
2 1/2” I.D. replacement
blade
Description
Silicone Squeegee Squeegee Nozzle
Kit
(1) 2 1/2” diameter steel sleeve
with a 3/8” NPT adapter
(1) 2 1/2” I.D. silicone squeegee
3” hose clamp
Product #
CP-SN3
Wheel Set (2) 6” diameter steel
disk wheels with 1/2”
I.D. X 1 1/2” hub
CP-W6-3 Axel Set (1) 13” axle
2 hitch pins
(4) 1/2” washers
CP-AK-3
Description
Banding Machine
4 gallon capacity
3” wide x 1/8” adjustable screed
6” diameter steel disc wheel
Product #
CP-4D
Description
Replacement Parts
Product #
CP-W6-4
Description
(2) 6” diameter steel
disk wheels with
1/2” I.D. x 2” hub
Wheel Set Axle Set (1) 11 1/2” axle
(4) 1/2” washers
(2) hitch pins
Description Product #
CP-AK-4
CP-SP 1/4” x 2” x 3”
wide steel plate Screed Plate
Crack Squeegees
Crack squeegee, 180º Gum rubber
Product #
RV-GUM
Description
“V” Style, Crack Squeegee
REVERSIBLE, push/pull style
“V” shaped with a 7” throat
Uses CSRH-4, 4’ ferruled wood handle
Crack squeegee, 220º Buna rubber HTRV-BUNA
Crack squeegee, 450º Silicone rubber HTRV-SIL
Replacement Parts
Product #
RV-R 180°
1/4” x 2” x 12”
Tan
Description Gum
replacement
blade
Product #
HTRV-BK 220°
1/4” x 2” x 12”
Black
Description Buna
replacement
blade
HTRV-RD 450°
1/4” x 2” x 12”
Red
Silicone
Replacement
blade
2
Crack squeegee, 180º Neoprene rubber
Product #
US-NEO Description
“U” Style, Crack Squeegee
REVERSIBLE, push/pull style
“U” shaped with a 3” throat
Uses CSRH-4, 4’ ferruled wood handle
Crack squeegee, 450º Silicone rubber US-SIL
Replacement Parts
Product #
US-R 1/4” x 2” x 18”
180°
Description Neoprene
replacement
blade
Silicone
replacement
blade
1/4” x 2” x 18”
450°
Description Product #
US-RD
Handle 4 ft., fits both “V”
& “U” squeegees CSRH-4
Handle 4 ft., fits both “V”
& “U” squeegees CSRH-4
“V” style Crack squeegee, 220° Buna rubber
Product #
HDRV-BUNA
Description
REVERSIBLE, push/pull style
“U” style Crack squeegee, 220° Buna rubber HDUS-BUNA
Replacement Parts
Product #
CSAH-6
Mounts both style crack
squeegees heads to all
AL-6H, 7H, or 9H
Description
Mounting Kit Buna “V”
Style replacement
blade
1/4” x 3” x 12”
220°
Product #
HDRV-BK
Buna “U” Style replacement
blade
1/4” x3” x 18”
220°
HDUS-BK
Heavy Duty
6 ft. Aluminum
Handle 1 1/4” O.D.,
Powder coated yellow AL-6H
3
“v” or “u” style, crack squeegees
Description
Product #
CH-4
Heavy Duty Product #
CH-5
Crack Hoes
Standard
* This well designed measuring instrument is a light weight (1lb) 1/2” diameter x 36” long
aluminum tube body with a 3/4” x 5” long aluminum handle. It’s 2” diameter base holds a 6”
x 1/4” plated steel plunger, and uses a thumb screw to adjust and lock.
36” O.A.L.
2” Diameter base
1/4” x 6” plated steel plunger
Description
Product #
ADG-2000
1/4” x6” plated steel plunger
Description Product #
ADG-6P Plunger
Replacement Parts
Asphalt Depth gauge
Foam bedding applicator
Product #
BMA-4
1 1/4” x 4” diameter polyethylene disc wheel
1/2” deep flexible disc pushing under surface
42” aluminum handle
Description
8” square Steel Base, 12 lbs.
1 1/2” x 42” hardwood handle
Product #
AT-428
Description
8” square Cast Aluminum Base, 8 lbs.
48” pipe handle, 3/4” Black Iron Pipe
Description Product #
AT-528
All Steel Construction
8” square x 1/4” Steel Plate Base, 13 lbs.
52” pipe handle, 1” Black Iron Pipe
Description Product #
AT-5208S
All Steel Construction
10” square x 1/4” Steel Plate Base, 17 lbs.
52” pipe handle, 1” Black Iron Pipe AT-5210S
Pavement Scrapers
10” Stainless Steel blade with knife edge
1 1/8” x 5 ft. steel tube handle
Product #
ASC-510
Description
14” flexible Spring Steel blade
1 1/8” x 5 ft. steel tube handle
Description Product #
ASC-514
Asphalt hand tampers
4
5
Asphalt lute/rakes
Extruded Aluminum Design
*Braced Kit Design using AL-BRAC brace kits
*NT is for Lute/Rake with No Teeth
30” Lute/Rake, 6 ft handle, AL-Brac brace kit
Description Product #
AL-630
36” Lute/Rake, 6 ft handle, AL-Brac brace kit AL-636
42” Lute/Rake, 6 ft handle, AL-Brac brace kit AL-642
48” Lute/Rake, 6 ft handle, AL-Brac brace kit AL-648
30” Lute/Rake, 7 ft handle, AL-Brac brace kit AL-730
36” Lute/Rake, 7 ft handle, AL-Brac brace kit
AL-742 42” Lute/Rake, 7 ft handle, AL-Brac brace kit
AL-736
AL-748 48” Lute/Rake, 7 ft handle, AL-Brac brace kit
AL-930 30” Lute/Rake, 9 ft handle, AL-Brac brace kit
AL-936 36” Lute/Rake, 9 ft handle, AL-Brac brace kit
AL-942 42” Lute/Rake, 9 ft handle, AL-Brac brace kit
AL-948 48” Lute/Rake, 9 ft handle, AL-Brac brace kit
2PC Bracket Design using AL-BRAK bracket kit
30” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit
Description Product #
AL-630B
36” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit AL-636B
42” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit AL-642B
48” Lute/Rake, 6 ft handle, AL-Brak, 2 pc bracket kit AL-648B
30” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit AL-730B
36” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit
AL-742B 42” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit
AL-736B
AL-748B 48” Lute/Rake, 7 ft handle, AL-Brak, 2 pc bracket kit
AL-930B 30” Lute/Rake, 9 ft handle, AL-Brak, 2 pc bracket kit
AL-936B 36” Lute/Rake, 9 ft handle, AL-Brak, 2 pc bracket kit
AL-942B 42” Lute/Rake, 9 ft handle, AL-Brak, 2 pc bracket kit
AL-948B 48” Lute/Rake, 9 ft handle, AL-Brak, 2 pc bracket kit
Big Boy Lute/rakes With 1 3/8” O.D. x 7 ft. handles
*Uses BAL-BRAK 2 pc. Bracket kit ONLY
30” Lute/Rake, 7 ft. Big Boy handle, BAL-Brak kit
Description Product #
BAL-730B
36” Lute/Rake, 7 ft. Big Boy handle, BAL-Brak kit BAL-736B
42” Lute/Rake, 7 ft. Big Boy handle, BAL-Brak kit BAL-742B
48” Lute/Rake, 7 ft. Big Boy handle, BAL-Brak kit BAL-748B
*Replacement parts to Asphalt Lute/Rakes on page 6*
Without Teeth
Product #
AL-630NT
AL-636NT
AL-642NT
AL-648NT
AL-730NT
AL-742NT
AL-736NT
AL-748NT
AL-930NT
AL-936NT
AL-942NT
AL-948NT
Without Teeth
Product #
AL-630BNT
AL-636BNT
AL-642BNT
AL-648BNT
AL-730BNT
AL-742BNT
AL-736BNT
AL-748BNT
AL-930BNT
AL-936BNT
AL-942BNT
AL-948BNT
Without Teeth
Product #
BAL-730BNT
BAL-736BNT
BAL-742BNT
BAL-748BNT
AL-6H 1 1/4” O.D.,
Powder coated yellow
6 ft. Aluminum
Handle 7 ft. Aluminum
Handle
1 1/4” O.D.,
Powder coated yellow AL-7H
9 ft. Aluminum
Handle 1 1/4” O.D.,
Powder coated yellow AL-9H
7 ft. Big Boy
Handle 1 3/8” O.D.,
Powder coated yellow BAL-7H
AL-BRAC Braces, clamps,
inserts, & hardware Brace Kit
Bracket
Kit 2-Brackets
& hardware AL-BRAK
Big Boy
Bracket Kit 2-Brackets
& hardware BAL-BRAK
Replacement Parts
Aluminum Handles, Brace & Bracket Kits, Extruded Lute/Rake Blades
Asphalt lute/screed
Extruded Aluminum Blade with Wood Handle
30”
6 ft. hardwood handle
Description Product #
WL-630
3 1/2” X 1/2” angle
Description Product #
WL-B30
Replacement Parts
Product #
WL-6H
All nuts & bolts
required
30” Lute/Screed
Blade 6 ft. Handle 1 1/4” O.D.,
Hardwood
Description
WL-HWD Mounting Brackets Hardware
Kit WL-BRAK
36” Lute/Rake
Blade with teeth AL-B36
42” Lute/Rake
Blade with teeth AL-B42
48” Lute/Rake
Blade with teeth AL-B48
30” Lute/Rake
Blade
Without teeth
Product # AL-B30NT
36” Lute/Rake
Blade
Without teeth
AL-B36NT
42” Lute/Rake
Blade Without teeth AL-B42NT
48” Lute/Rake
Blade
Without teeth
AL-B48NT
30” Lute/Rake
Blade with teeth Product #
AL-B30
Description Description
6
Steel Asphalt Rake
14 teeth x 16” wide design with a 78” overall length with a long hardwood Ferruled
Handle make this tool ideal for those tough jobs, particularly working under infrared
pavement heating machines
14 teeth
60” Hardwood handle
Description Product #
HAR-14
Sealcoating spray tips
Ceramic steel tips *Example: 80/50 = 80 degrees of spray with 50 PSI
80/50
1/4” N.P.T.
With insert & steel shield
Product #
CT-8052
Description
Ceramic Spray Tip Kit
80/50
3/8” N.P.T.
With insert & steel shield CT-8053
Ceramic Spray Tip Kit
80/50 CT-805T Ceramic Spray Tip Insert Only
CT-8072
80/70
1/4” N.P.T.
With insert & steel shield Ceramic Spray Tip Kit
80/70
3/8” N.P.T.
With insert & steel shield CT-8073
Ceramic Spray Tip Kit
80/70 CT-807T Ceramic Spray Tip Insert Only
CT-8102
80/100
3/8” N.P.T.
With insert & steel shield
CT-8103
80/100
1/4” N.P.T.
With insert & steel shield
Ceramic Spray Tip Kit
Ceramic Spray Tip Kit
80/100 CT-810T Ceramic Spray Tip Insert Only
CT-810X 1/4” N.P.T.
Fits all ceramic spray tips
Ceramic Spray Tip Kit
Body and Shield
3/8” N.P.T.
Fits all ceramic spray tips
CT-810Y Ceramic Spray Tip Kit
Body and Shield
7
Sealcoating spray tips– continued
Harden steel spray tips *Example: 80/50 = 80 degrees of spray with 50 PSI
*Also available in 1/2” N.P.T.*
80/20
1/4” N.P.T.
Product #
ST-8022
Description
80/20
3/8” N.P.T. ST-8023
80/30
1/4” N.P.T. ST-8032
80/30
3/8” N.P.T. ST-8033
80/40
1/4” N.P.T. ST-8042
80/40
3/8” N.P.T. ST-8043
80/50
1/4” N.P.T. ST-8052
80/50
3/8” N.P.T. ST-8053
80/70
1/4” N.P.T. ST-8072
80/70
3/8” N.P.T. ST-8073
Asphalt shoes
One Size Fits All
Description Product #
SHOE-2
*Use our Asphalt Shoes to provide a buffer between your jobsite surface environment
and the environment outside it. These shoes are designed with a chemical resistant felt
sole, fastened to a galvanized metal shoe secured with quick release straps for fast and
easy on/offs.
8
Sealcoating Applicators
AS-Series, Extruded Aluminum & Rubber *Braced Kit Design using AL-BRAC brace kits
* FOR EXAMPLE OF AL-BRAC/AL-BRAK LOOK ON PAGE 17
24” Squeegee, 6 ft handle, AL-Brac brace kit
Description Product #
AS-624
30” Squeegee, 6 ft handle, AL-Brac brace kit AS-630
36” Squeegee, 6 ft handle, AL-Brac brace kit AS-636
48” Squeegee, 6 ft handle, AL-Brac brace kit AS-648
60” Squeegee, 6 ft handle, AL-Brac brace kit AS-660
72” Squeegee, 6 ft handle, AL-Brac brace kit
AS-724 24” Squeegee, 7 ft handle, AL-Brac brace kit
AS-672
AS-730 30” Squeegee, 7 ft handle, AL-Brac brace kit
AS-736 36” Squeegee, 7 ft handle, AL-Brac brace kit
AS-748 48” Squeegee, 7 ft handle, AL-Brac brace kit
AS-760 60” Squeegee, 7 ft handle, AL-Brac brace kit
AS-772 72” Squeegee, 7 ft handle, AL-Brac brace kit
2 PC Bracket Design using AL-BRAK
24” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit
Description Product #
AS-624B
30” Squeegee, 6 ft handle, AL-Brak, 2 PC brace AS-630B
36” Squeegee, 6 ft handle, AL-Brak, 2 PC brace AS-636B
AS-648B
60” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit AS-660B
72” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit
AS-724B 24” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
AS-672B
AS-730B 30” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
AS-736B 36” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
AS-748B 48” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
AS-760B 60” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
AS-772B 72” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
Big Boy squeegees With 1 3/8” O.D. x 7 ft. handles
*Uses BAL-BRAK 2 pc. Bracket kit ONLY
24” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit
Description Product #
BAS-724B
30” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-730B
36” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-736B
48” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-748B
30” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit
36” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit
48” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit
60” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-760B
72” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BAS-772B
**AS-Series Replacement Parts on page 11** 9
Sealcoating Applicators
MS-Series, Extruded Aluminum & Rubber *Braced Kit Design using AL-BRAC brace kits
*FOR EXAMPLE OF AL-BRAC/AL-BRAK LOOK ON PAGE 17
24” Squeegee, 6 ft handle, AL-Brac brace kit
Description Product #
MS-624
30” Squeegee, 6 ft handle, AL-Brac brace kit MS-630
36” Squeegee, 6 ft handle, AL-Brac brace kit MS-636
48” Squeegee, 6 ft handle, AL-Brac brace kit MS-648
60” Squeegee, 6 ft handle, AL-Brac brace kit MS-660
72” Squeegee, 6 ft handle, AL-Brac brace kit
MS-724 24” Squeegee, 7 ft handle, AL-Brac brace kit
MS-672
MS-730 30” Squeegee, 7 ft handle, AL-Brac brace kit
MS-736 36” Squeegee, 7 ft handle, AL-Brac brace kit
MS-748 48” Squeegee, 7 ft handle, AL-Brac brace kit
MS-760 60” Squeegee, 7 ft handle, AL-Brac brace kit
MS-772 72” Squeegee, 7 ft handle, AL-Brac brace kit
2 PC Bracket Design using AL-BRAK
24” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit
Description Product #
MS-624B
30” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit MS-630B
36” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit MS-636B
48” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit MS-648B
60” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit MS-660B
72” Squeegee, 6 ft handle, AL-Brak, 2 PC brace kit
MS-724B 24” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
MS-672B
MS-730B 30” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
MS-736B 36” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
MS-748B 48” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
MS-760B 60” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
MS-772B 72” Squeegee, 7 ft handle, AL-Brak, 2 PC brace kit
Big Boy Squeegees With 1 3/8” O.D. x 7 ft. handles
*Uses BAL-BRAK 2 PC. Bracket kit ONLY
24” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit
Description Product #
BMS-724B
30” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-730B
36” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-736B
48” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-748B
60” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-760B
72” Squeegee, 7 ft. Big Boy handle, BAL-Brak kit BMS-772B
**MS-Series Replacement Parts on page 11** 10
Product #
AL-6H 1 1/4” O.D.,
Powder coated yellow
Description 6 ft. Aluminum
Handle 7 ft. Aluminum
Handle 1 1/4” O.D.,
Powder coated yellow
Description Product #
AL-7H
9 ft. Aluminum
Handle 1 1/4” O.D.,
Powder coated yellow AL-9H 7 ft. Big Boy
Handle 1 3/8” O.D.,
Powder coated yellow BAL-7H
AL-BRAC Braces, clamps,
inserts, & hardware Brace Kit
Bracket
Kit 2-Brackets
& hardware AL-BRAK
Big Boy
Bracket Kit 2-Brackets
& hardware BAL-BRAK 24” Neoprene Squeegee Blade MS-R24
30” Neoprene Squeegee Blade MS-R30 36” Neoprene Squeegee Blade MS-R36
48” Neoprene Squeegee Blade MS-R48 60” Neoprene Squeegee Blade MS-R60
72” Neoprene Squeegee Blade MS-R72
Replacement Parts
Aluminum Handles, Brace & Bracket Kits,
MS-Series Extruded Neoprene Replacement Blades
Product #
AL-6H 1 1/4” O.D.,
Powder coated yellow
Description 6 ft. Aluminum
Handle 7 ft. Aluminum
Handle 1 1/4” O.D.,
Powder coated yellow
Description Product #
AL-7H
9 ft. Aluminum
Handle 1 1/4” O.D.,
Powder coated yellow AL-9H 7 ft. Big Boy
Handle 1 3/8” O.D.,
Powder coated yellow BAL-7H
AL-BRAC Braces, clamps,
inserts, & hardware Brace Kit
Bracket
Kit 2-Brackets
& hardware AL-BRAK
Big Boy
Bracket Kit 2-Brackets
& hardware BAL-BRAK 24” Neoprene Squeegee Blade AS-R24P
30” Neoprene Squeegee Blade AS-R30P 36” Neoprene Squeegee Blade AS-R36P
48” Neoprene Squeegee Blade AS-R48P 60” Neoprene Squeegee Blade AS-R60P
72” Neoprene Squeegee Blade AS-R72P
Replacement Parts
Aluminum Handles, Brace & Bracket Kits,
AS-Series Extruded Neoprene Replacement Blades
1 1
Sealcoating Applicators
Parking Lot Squeegees *Uses MS-style, 3” x 1/4” blades with holes
24” Parking Lot Squeegee, handle not included
Description Product #
PL-24
30” Parking Lot Squeegee, handle not included PL-30
36” Parking Lot Squeegee, handle not included PL-36
Replacement Parts
Product #
PL-R24 24” Neoprene Replacement Blade 30” Neoprene Replacement Blade
Description
Product #
PL-R30
36” Neoprene Replacement Blade PL-R36 Handle 6 ft. x 1 1/8”
Hardwood, tapered end WB-6
Car Stop Squeegees *Uses MS-style, 3” x 1/4” blades with holes
6” Car Stop Squeegee, push with handle
Description Product #
CS-1606
6” Car Stop Squeegee, Pull with handle CS-2606
10” Car Stop Squeegee, push with handle CS-1610
Replacement Parts
Product #
CS-R06 6” Neoprene Replacement Blade 10” Neoprene Replacement Blade
Description
Product #
CS-R10
Handle WB-6 6 ft. x 1 1/8”
Hardwood, tapered end
10” Car Stop Squeegee, Pull handle CS-2610
CS-1606
CS-1610
18” Driveway Squeegee, 5 ft. handle
Description
18” Driveway Curved Squeegee, 5 ft. handle DS-518C
Driveway Squeegees *Uses 2” x 1/4” extruded neoprene blade
*Uses 5ft. X 15/16”, lacquer finished hardwood handle
Product #
DS-518
24” Driveway Squeegee, 5 ft. handle DS-524
Replacement Parts
Product #
DS-R18 18” Neoprene Replacement Blade 24” Neoprene Replacement Blade Product #
DS-R24
30” Neoprene Replacement Blade DS-R30
24” Driveway Curved Squeegee, 5 ft. handle DS-524C
30” Driveway Squeegee, 5 ft. handle DS-530
30” Driveway Curved Squeegee, 5 ft. handle DS-530C
36” Driveway Squeegee, 5 ft. handle DS-536
36” Driveway Curved Squeegee, 5 ft. handle DS-536C
36” Neoprene Replacement Blade DS-R36
12
Sealcoating Applicators
Brushcoaters (alternative brush applicators)
*2” long Polypropylene fibers
*2” x 1” hardwood block base
18” Brushcoater, handle not included
Description Product #
BSB-18
24” Brushcoater, handle not included BSB-24
36” Brushcoater, handle not included BSB-36
Replacement Parts Product #
SB-B Brace Kit
Description
Aluminum Handle Assembly BH-6
Handle 6 ft. handle x 15/16”
Hardwood, threaded end
Product #
SB-6
Description
Optional, not included
For SB-6 handle
STREET BROOMS
Poly Street Brooms *5” long polypropylene bristles
*16” x 3 1/2” x 1 1/4” hardwood block
16” Poly Street Broom HANDLE NOT INCLUDED
Product #
SB-16
Description
Wire Street Brooms *3 3/4” long coated steel bristles
*16” x 3 5/16” x 1 1/8” hardwood block
16” Wire Street Broom HANDLE NOT INCLUDED
Product #
WSB-16
Description
Oil Spot Brooms *5” long x 1/16” wide, flat steel bristles
*12 1/4” x 2 1/2” x 1 3/4” hardwood block
12” Oil Spot Broom HANDLE NOT INCLUDED
Product #
OSB-12
Description
Product #
WB-6 Handle 6 ft. x 1 1/8”
Hardwood, tapered end
13
PARTS SOLD SEPERATLY
Aluminum Handle
Assembly AH-6
Uses AL-6h hande with AL-BRAK
mounting
Complete wit handle, mounting
base & hardware
Handles & Handle Kits
Product #
AL-6H 1 1/4” O.D.
.062 Wall thickness
Description 6 ft. Aluminum
Handle 7 ft. Aluminum
Handle 1 1/4” O.D.,
.062 Wall thickness
Description Product #
AL-7H
9 ft. Aluminum
Handle
1 1/4” O.D.,
.062 Wall thickness AL-9H 7 ft. Big Boy
Handle
1 3/8” O.D.,
.062 Wall thickness BAL-7H
Aluminum Handles
*Powder coated a gloss yellow
Aluminum Handles Assemblies
Aluminum Handle
Assembly Product #
Brushcoaters Aluminum Handle
Assembly
Product #
AH-6 Street Broom
Hardwood Handles & Brace Kits
*Mounts to STREET BROOMS & BRUSHCOATERS
*Uses AL-6H handle with AL-BRAK mounting
*Complete with handle, mounting base, & hardware
*Fits SB, WSB, OSB, BSB, & CS brooms, brushes, and
squeegees
Product #
SB-B Brace Kit
Description Handle 6 ft. handle x 15/16”
Hardwood, threaded end
Product #
SB-6
Description
Optional, not included
For SB-6 handle
Handle 6 ft. x 1 1/8”
Hardwood, tapered end WB-6 Brace Kit Optional for WB-6 handles WB-BRAC
Hoe Handle 4 ft.
fits “V” & “U” Squeegee CSRH-4
Parking Lot protractor
*Fast and Accurate Layouts
*Quick and Easy angles
7’ - 5” open length
Product #
PP-180-4 Description
1) Open Parking Lot Protractor to desired angle from curb, wall, etc. With finger nut, tighten
protractor in place.
2) Lay Parking Lot Protractor on the parking lot (at your first stripe mark) with one side against the
curb, etc.
3) With a piece of chalk, make two marks along the exposed edge of the protractor on the surface to
be striped
4) With a chalk line, pop a line over the two marks giving your desired angle
Instructions for use:
14
Measuring wheel
*Telescopic aluminum handles
*Limited one year warranty
One wheel, 1 ft. circumference
999’-9” meter (in inches)
Product #
DM-310
Description
Two wheels, 1 ft. circumference
999’-9” meter (in inches)
Product #
DM-320
3 ft. Diameter wheel
999’-11” meter (in inches)
Without Kick Stand
Product #
DM-330
4 ft. Diameter wheel
999’-11” meter (in inches)
With Kick Stand
Product #
DM-340
Description
Description
Description
4” stencil trays
*4” single tray with 40” opening
*4” double word tray with (2) 26” openings
*Position and Hold without bending over
*Excellent for holding alphabet and numbers for custom wording and numbering
*Hinged for easy horizontal to vertical positioning during operation
Single tray with 40” opening
Product #
ST-4 Description
Double word tray with (2) 26” openings STD-4
* Developed to relieve a labor intensive and highly repetitive process, typically
using three people to position, paint, and remove stencils efficiently.
15
Pre-marked layout tape
*Pre-marked for 90 degrees; 8’-6”, 9’, & 10’ stall widths
*Pre-marked for 60 degrees; 9’, & 10’ stall widths
*300 ft. long tape, marked on both sides
300 ft. long tape on reel
Product #
PMT-300
Description
Pre-Marked Layout Tapes make parking lot striping layouts faster and easier. Save time and
headaches from rechecking numbers, and stripes!
Chalk, lines, & barricade tape
Chalk Lines *Heavy duty, spun poly/cotton cords
*Larger chalk reservoirs
*Improved bodies, reels, and eyelets
Chalk Line, 100 ft., rapid-wind, & metal case
Description Product #
RWCL-100
Chalk Line, 110 ft., Poly case, Large Reservoir HDCL-110
Chalk Line, 150 ft., Poly Case, extra large reservoir HDCL-150
Layout Crayons and Chalk *Crayons are great for foul weather layout
*Large 1” x 4” chalk makes marks easy to see
Layout Crayon, yellow, weatherproof, 12 per box
Description Product #
LCR-12Y
Layout Crayon Holder, aluminum body LCR-HD
Layout Chalk, 1” diameter. X 4” long, 72 per box LCH-72
Barricade Tape *High Visibility, virgin yellow opaque poly material
*Scratch-proof and weather resistant
*Custom legends available from 200 to 1000 ft.
Barricade Tape, Economy, 200 ft. x 3”
Description Product #
BT-210
Barricade Tape, Heavy Duty, 1000 ft. x 3” BT-1000
Barricade Tape, Economy, 1000 ft. x 3” BT-1210
RWCL-100
HDCL-150
HDCL-110
16
Replacement Parts
Brace Kits
Mounting Kits
Hardware Kit
17
Product #
WL-HWD
Description
All nuts and bolts required
Used For:
Lute/Screed mounting bracket
WL-BRAK Hardware sold separately Lute/Screed
Product #
CSAH-6
Description
Mounts to both style Crack
Squeegees
Used For:
Heavy Duty “V” & “U” Squeegees
Product #
AL-BRAC
WB-BRAC
SB-B
AL-BRAK
BAL-BRAK
Description
Braces, clamps, inserts, &
hardware
Used For: Lute/Rake
AS Series Squeegee
MS Series Squeegees
Braces, clamps, & hardware
Optional for WB-6 handle used
for * PSB,WSB, & OSB
* Parking Lot, Car Stop, &
Driveway Squeegees
Braces, clamps, & hardware Optional for SB-6 handle used
for * Brushcoaters
2 - Brackets & hardware
Lute/Rakes
AS Series Squeegees
MS Series Squeegees
2 - Big Boy Brackets &
hardware
Lute/Rakes
AS Series Squeegees
MS Series Squeegees
Handles
Product #
AL-6H
AL-7H
AL-9H
Description
Aluminum
6ft 1 1/4” dia. X .062 wall
thickness
Powder coated yellow
Used For: AS-Series Squeegees
MS-Series Squeegees
Lute/Rakes
Heavy Duty “V” or “U”
Squeegee
WB-6 6ft x 1 1/8”
Hardwood tapered end
PSB, WSB, & OSB
Parking Lot, Car Stop, &
Driveway Squeegees
SB-6 6ft x 15/16”
Hardwood, threaded end Brushcoaters
BAL-7H
AS-Series Squeegees
MS-Series Squeegees
Lute/Rakes
Aluminum
7ft 1 3/8” dia. X .062
wall thickness
CSRH-4 4ft “V” Style Squeegee
“U” Style Squeegee
WL-6H 6ft x 1 1/4 O.D.
hardwood Lute/Screed
Aluminum
7ft 1 1/4” dia. X .062 wall
thickness
Powder coated yellow
AS-Series Squeegees
MS-Series Squeegees
Lute/Rakes
Aluminum
9ft 1 1/4” dia. X .062 wall
thickness
Powder coated yellow
AS-Series Squeegees
MS-Series Squeegees
Lute/Rakes
Aluminum Handle Assembly
Product #
AH-6
BH-6
Description
Uses handle (AL-6H) with
AL-BRAK mounting
Complete with handle,
mounting base, & hardware
Used For:
PSB, WSB, & OSB
Street brooms
Uses handle (AL-6H) with
AL-BRAK mounting
Complete with handle,
mounting base, & hardware
Brushcoaters
Replacement Parts
18
Stencil information
19
There are many grades of plastic in our industry. Our stock stencils are produced from the best grade
of polyethylene plastic you can use for a stencil. Other products not manufactured with this superior
grade of polyethylene plastic will not give you the same lasting service as ours. Polyethylene plastic is
made for easy maintenance. The non-porous, slick surface allows the dried paint build-up to simply
flake off after drying when properly taken care of. Stencils are best stored flat and in moderate
temperature when not in use.
*All of our stencils are designed around D.O.T. specifications whenever applicable. We can comply
with variations in Municipal, State, or Private specifications when provided with details.
We also have the ability to produce stencils in:
Aluminum
Steel
*We have more variety of stencils that are not shown in the catalog. To find out more call us!
S-0001 D/M 4’ X 8’ LDPE Plastic Sheet
S-0002 D/M 4’ X 10’ LDPE Plastic Sheet
Pavement tool plastic stencil material
Our 2 types of plastic are:
MAXILAST: 1/8” (.125 mil.) thick
DUROLAST: 1/16” (.060 mil.) thick
Symbols & Kits
S-1010 D/M Standard Stencil Kit Includes one each of the following
- 21 1/2” Handicap Symbol - 4” “No Parking”
- 42” Standard Arrow Kit, 2 pc. - 4” “Fire Lane”
- 12” “No Parking” - 4” “Visitors”
- 12” “Fire Lane” - 4” “Reserved”
- 12” Standard Number Kit, 12 pc.
S-1020 D/M Large Stencil Kit Includes one each of the following
- 39” Handicap Symbol - 4” “No Parking”
- 90” Large Arrow Kit, 3 pc. - 4” “Fire Lane”
- 24” “No Parking” - 4” “Visitors”
- 24” “Fire Lane” - 4” “Reserved”
- 12” Standard Number Kit, 12 pc.
S-3015 D/M
Handicap Symbol 15 1/2” Tall x 13 3/4” Wide
To D.O.T. specs
S-3030 D/M
Handicap D.O.T. KIT, 2 PC.
(1) 30” Handicap Symbol with a outside
Border of 42” sq. x 3” wide bar
(1) 38” sq. blue background stencil
S-3021 D/M
Handicap Symbol 21 1/2” Tall x 19” Wide
To D.O.T. specs
S-3039 D/M
Handicap Symbol 39” Tall x 34” Wide x 4” Bar
To D.O.T. specs
S-3048 D/M
Handicap Symbol 48” Tall x 43 1/2” Wide x 3” Bar
To California D.O.T. specs
S-3148 D/M
Handicap Symbol 48” Tall x 41 1/4” Wide x 4” Bar
To Texas D.O.T. specs
S-3072 D/M
Handicap Symbol 2 PC. 72” Tall x 63” Wide x 5” Bar
To D.O.T. specs
S-4042 D/M
Standard Arrow Kit 2 pc.
(1) Straight tail & (1) Curved tail
42” O.A.L. 20” Wide Head,
9” Wide Tail
S-4060 D/M
Straight Arrow 60” O.A.L. 36” Wide Head
12” Wide Tail
S-4065 D/M
Curved Tail 12” Wide Tail
Fits S-4060
S-4090 D/M
Large Arrow Kit 3 pc.
(1) Head, 42” Tall x 36” Wide
(1) Straight Tail 42” x 12”
(1) Curved Tail 42” x 24”
S-5000 D/M
Straight Arrow Kit 2 pc.
Highway/ Intersection
10’ O.A.L. to D.O.T. spec.
S-5010 D/M
Curved Arrow Kit 2 pc.
Highway/ Intersection
8’- 4” O.A.L. to Texas D.O.T. spec.
(Details vary per state)
S-5015 D/M
Arrow Combo Kit 3 pc.
Highway/ Intersection
13’- 4” O.A.L. to Texas D.O.T. spec.
(Details vary per state) 20
42” 60”
12”
42”
40”
120”
64”
12”
36”
32”
20” 76”
32”
76” 12”
160”
64”
40”
12” 76”
32”
76”
32”
20”
36”
S-5020 D/M
Railroad “R”
78” Tall x 12 1/2” Wide To Texas D.O.T. Specs
(Details vary per state)
S-5021 D/M
Railroad “X”, 10 pc. 20’ Tall x 8’ Wide
“R’s” are not included
S-5035 D/M
Pedestrian Crossing Symbol 4’ 6” Tall x 3’ 8” Wide
To D.O.T specs
S-5040 D/M
Intersection Crosswalk Stop Bar Your choice in width up to 24” x 7’-6” long
inside dimensions with a 3” bar on all sides
Symbols & Kits
S-5070 D/M
Line Loop Stencil For double lines, any width and size
S-5060 D/M
Line Stencil, 1 pc. 4” wide x 14’ long stripe
On material 12” x 15’ long
S-5050 D/M
Wheel Stop Overspray Kit, 2 pc. “L” Shaped 8” x 78” I.D.
S-5080 D/M
Traffic Cone I.D. Stencil Fits 18” Cones, 1” character size
S-5082 D/M
Traffic Cone I.D. Stencil Fits 28” Cones, 1” character size
S-3139 D/M
Stork Symbol 39” Tall x 39” Wide
Recycling Stencils Help everyone pitch in and help the recycling effort. Set up a company recycling system easily and effectively. Make
employees and/or customers aware of your companies recycling policy. Clearly post areas for recyclable products
S-5605 D/M
Recyclable Logo 2” wording, 16” wide symbol,
20” sq. plastic
S-5600 D/M Recycling Stencil Kit, 6 pc. 2” Wording
“Recyclable Logo” Included
21
78”
12 1/2”
8 ft.
20 ft.
Environmental health stencils
S-5651 D
2” Characters
Plastic Size: 24” sq.
S-5652 D
2” Characters
Plastic Size: 24” sq.
S-5653 D
2” Characters
Plastic Size: 24” sq.
S-5654 D
2” Characters
Plastic Size: 24” sq.
S-5655 D
2” Characters
Plastic Size: 30” x 16”
Floor warning Stencils
S-5502 D
Stencil Size: 17” x 17”
Plastic Size: 24” x 24”
S-5509 D
Stencil Size: 17” x 17”
Plastic Size: 24” x 24”
S-5513 D
Stencil Size: 17” x 17”
Plastic Size: 24” x 24”
Cars - bikes - Motorcycle Stencils
S-5030 D/M
Bicycle Lane Symbol
6’ 6” Tall x 3’ 8” Wide
S-5032 D/M
Bicycle Lane Symbol
5’ 6” Tall x 44” Wide
S-5033 D/M
Bicycle Lane Symbol
9’ 3” Tall x 44” Wide
S-5036 D/M
Motorcycle Symbol
44” Tall x 60” Wide 22
S-5511 D
Stencil Size: 17” x 17”
Plastic Size: 24” x 24”
S-0039 D/M
Electric Car Symbol
38” Tall x 38” Wide
Plastic Size: 48” x 48”
20 1/8”
19 3/4” 18 1/8”
18 1/8”
15 5/8”
18 1/8”
15 3/8”
18 1/8”
25 1/2”
10 1
/4”
Stencilocs
This system is developed to easily interlock our plastic stencils. We have designed them to
connect along the top and bottom to allow a temporary or permanent (with plastic adhesive) assembly of any multiple piece plastic stencil kit or symbol. This design makes handling
multi-piece stencils much easier
Product # Description
SL-1212 D/M
SL-2412 D/M
SL-3600 D/M
SL-4200 D/M
SL-4800 D/M
SL-7200 D/M
12” Long Single Piece
24” Long Single Piece
36” Long Single Piece
42” Long Single Piece
48” Long Single Piece
72” Long Single Piece
Brass interlocking stencil kits Spell anything you need on site in minutes with our Interlocking Brass Stencil Kits.
Product # Description
BS-115
BS-192
1” Brass Kit (15 pc.)
1” Brass Kit (92 pc.)
15 Piece Kit Includes: 1 2 3 4 5 6 7 8 9 00, 1-Period, 1-Dash, 2-Blank
92 Piece Kit Includes: AAA BB CC DD EEEE FF GG HH III JJ KK LL MM NNN OOO PP Q RR SSS TT UU
VV WW XX YY ZZ && 111 22 33 44 55 66 77 88 99 000, 1-Coma, 1-Dash,
3-Periods, 3-Spacers, 2-Blanks.
23
BS-215
BS-292
BS-315
BS-392
BS-415
BS-492
BS-515
BS-592
BS-615
BS-692
2” Brass Kit (15 pc.)
2” Brass Kit (92 pc.)
3” Brass Kit (15 pc.)
3” Brass Kit (92 pc.)
4” Brass Kit (15 pc.)
4” Brass Kit (92 pc.)
5” Brass Kit (15 pc.)
5” Brass Kit (92 pc.)
6” Brass Kit (15 pc.)
6” Brass Kit (92 pc.)
Wording & individual character stencils
All of our Characters are a standard GOTHIC BLOCK style/font, but we are also capable of producing letters, numbers, or words in over
500 different styles or fonts and in other languages if needed. All Styles and fonts are generated and stored on computer files for future
recall and production. All wording stencils from 24” to 96” in height are designed around D.O.T. specifications and are designed to be
read at a 22 degree angle. Please note these are our stock sizes listed. Anything not listed is considered custom.
Numbers and Alphabet kits
Standard Number Kit: Includes 12 pc.; 1 2 3 4 5 6 7 8 9 0 and 2 blanks.
Standard Alphabet Kit: Includes 28 pc.; A B C D E F G H I J K L M N O P Q R S T U V W X Y Z and 2 blanks.
Mega Kit: Includes 63 pc; AA B C D EEE F G H II J K LL M NN OO P Q RR SSS TT U V W X Y Z 11 22 33 4 5 6 7 8 9 00
& # / ( ) - , . And 4 blanks.
Wording: 3/8” between letters, 2 1/4” between words
Character: 2” T. x 1 1/2” W., 3/8” bar width
Plastic: 6” x 2 1/2”
S-7021 D/M 2” Wording (Up to 10 letters)
S-8020 D/M 2” Standard Number Kit, 12 pc.
S-8025 D/M 2” Standard Alphabet Kit, 28 pc.
S-8028 D/M 2” Mega Kit, 63 pc.
S-9020 D/M 2” Individual Characters
S-7031 D/M 3” Wording (Up to 10 letters)
S-8030 D/M 3” Standard Number Kit, 12 pc.
S-8035 D/M 3” Standard Alphabet Kit, 28 pc.
S-8038 D/M 3” Mega Kit, 63 pc.
S-9030 D/M 3” Individual Characters
S-7041 D/M 4” Wording (Up to 10 letters)
S-8040 D/M 4” Standard Number Kit, 12 pc.
S-8045 D/M 4” Standard Alphabet Kit, 28 pc.
S-8048 D/M 4” Mega Kit, 63 pc.
S-9040 D/M 4” Individual Characters
S-7061 D/M 6” Wording (Up to 10 letters)
S-8060 D/M 6” Standard Number Kit, 12 pc.
S-8065 D/M 6” Standard Alphabet Kit, 28 pc.
S-8068 D/M 6” Mega Kit, 63 pc.
S-9060 D/M 6” Individual Characters
S-7080 D/M 8” Wording (Up to 5 letters)
S-7081 D/M 8” Wording (Up to 10 letters)
S-8080 D/M 8” Standard Number Kit, 12 pc.
S-8085 D/M 8” Standard Alphabet Kit, 28 pc.
S-8088 D/M 8” Mega Kit, 63 pc.
S-9080 D/M 8” Individual Characters
Wording: 3/8” between letters, 2 3/4” between words
Character: 3” T. x 2” W., 3/8” bar width
Plastic: 7” x 3”
Wording: 1/2” between letters, 3 1/4” between words
Character: 4” T. x 2 1/4” W., 1/2” bar width
Plastic: 8” x 4”
Wording: 7/8” between letters, 5 3/4” between words
Character: 6” T. x 4” W., 7/8” bar width
Plastic: 10” x 6”
Wording: 1 1/2” between letters, 9” between words
Character: 8” T. x 6” W., 1 1/2” bar width
Plastic: 12” x 9”
Wording: 1 3/4” between letters, 11” between words
Character: 10” T. x 7 1/2” W., 1 3/4” bar width
Plastic: 14” x 11”
S-7100 D/M 10” Wording (Up to 5 letters)
S-7101 D/M 10” Wording (Up to 10 letters)
S-8100 D/M 10” Standard Number Kit, 12 pc.
S-8105 D/M 10” Standard Alphabet Kit, 28 pc.
S-8108 D/M 10” Mega Kit, 63 pc.
S-9100 D/M 10” Individual Characters
24
2”
3”
4”
6”
8”
10”
Wording: 12” T. x 9” W., 2” between letters, 13” between words
Plastic: 16” x 12”
S-7120 D/M 12” Wording (Up to 5 letters)
S-7121 D/M 12” Wording (Up to 10 letters)
S-8120 D/M 12” Standard Number Kit, 12 pc.
S-8125 D/M 12” Standard Alphabet Kit, 28 pc.
S-8128 D/M 12” Mega Kit, 63 pc.
S-9120 D/M 12” Individual Characters
12”
18”
Wording: 18” T. x 9” W., 2” between letters, 13” between words
Plastic: 22” x 12”
S-7180 D/M 18” Wording (Up to 5 letters)
S-7181 D/M 18” Wording (Up to 10 letters)
S-8180 D/M 18” Standard Number Kit, 12 pc.
S-8185 D/M 18” Standard Alphabet Kit, 28 pc.
S-9180 D/M 18” Individual Characters
25
24” x 9”
Wording: 4” between letters, 13” between words
Character: 24” T. x 9” W., 2” Vertical x 3 1/2” Horizontal Bar Width
Plastic: 28” x 12”
S-7240 D/M 24” Wording (Up to 5 letters)
S-7241 D/M 24” Wording (Up to 10 letters)
S-8240 D/M 24” Standard Number Kit, 12 pc.
S-8245 D/M 24” Standard Alphabet Kit, 28 pc.
S-9240 D/M 24” Individual Characters
24” x 16” -Wide Body-
Wording: 4” between letters, 24” between words
Character: 24” T. x 16” W., 4” Vertical x 4” Horizontal Bar Width
Plastic: 28” x 22”
S-7240W D/M 24” Wording (Up to 5 letters)
S-7241W D/M 24” Wording (Up to 10 letters)
S-8240W D/M 24” Standard Number Kit, 12 pc.
S-8245W D/M 24” Standard Alphabet Kit, 28 pc.
S-9240W D/M 24” Individual Characters
26
27
36”
Wording: 2 1/2” between letters, 14” between words
Character: 36” T. x 9” W., 2 1/2” Vertical x 6” Horizontal Bar Width
Plastic: 48” x 13”
S-7360 D/M 36” Wording (Up to 5 letters)
S-7361 D/M 36” Wording (Up to 10 letters)
S-8360 D/M 36” Standard Number Kit, 12 pc.
S-8365 D/M 36” Standard Alphabet Kit, 28 pc.
S-9360 D/M 36” Individual Characters
42”
Wording: 2 1/2” between letters, 17” between words
Character: 42” T. x 12” W., 2 1/2” Vertical x 6” Horizontal Bar Width
Plastic: 48” x 16”
S-7420 D/M 42” Wording (Up to 5 letters)
S-7421 D/M 42” Wording (Up to 10 letters)
S-8420 D/M 42” Standard Number Kit, 12 pc.
S-8425 D/M 42” Standard Alphabet Kit, 28 pc.
S-9420 D/M 42” Individual Characters
28
48”
Character: 48” T. x 12” W., 3” Vertical x 8” Horizontal Bar Width
Plastic: 60” x 18”
S-8480 D/M 48” Standard Number Kit, 12 pc.
S-8485 D/M 48” Standard Alphabet Kit, 28 pc.
S-9480 D/M 48” Individual Characters
72”
Character: 72” T. x 16” W., 3” Vertical x 8” Horizontal Bar Width
Plastic: 84” x 24”
S-9720 D/M 72” Individual Characters
Character: 96” T. x 16” W., 4” Vertical x 8” Horizontal Bar Width
Plastic: 108” x 24”
S-9960 D/M 96” Individual Characters
96”
29
Athletic stencil kits
Stencil Kits specially designed for athletic track and field markings, logos, and advertisings
S-6030 D/M
Football Field Numbering Kit 8 pc., Includes: Roman Style, 3’ T. x 2’ W.
S-6060P D/M
Football Field Numbering Kit 8 pc., Includes: Roman Style, 6’ T. x 4’ W.
S-6070 D/M
Football Field Dash Mark Kit Marks 4 dashes & 1 inbound line, 2 pc., 5 yards
(1) Durolast Kit overlaps and rivets together
(2) Maxilast kit fixed together with piano hinge
S-6100 D/M
Track Lane Marking Kit 14 pc. Includes: Roman Style, 3’ T. x 2’ W.
(1,2,3,4,5,6,7,8, Start Line, Hurtle, Exchanges,
& Acceleration Markers)
S-6200 D/M
Helmet Stencil Kit 9 pc., 15’ 6” T. x 19’ x 6” W.
Will hold a 9’ T. x 14’ W. logo inside
S-6200P D/M
Pro-Style Helmet Stencil Kit 20 pc., 15’ 6” T. x 14’ W.
Will hold a 7’ T. x 10’ W. logo inside
S-6303 D/M
School Lettering
3’ T. x 2’ W.
Stamp Stencil Style
S-6310 D
School Lettering
10’ T. x 6’ 6” W.
Gothic Block Style
S-6312 D
School Lettering
12’ T. x 8’ W.
Gothic Block Style
S-6315 D
School Lettering
15’ T. x 10’ W.
Gothic Block Style
S-6320 D
School Lettering
20’ T. x 14’ 6” W.
Gothic Block Style
S-6330 D/M
School Lettering
30’ T. x 22’ W.
Gothic Block Style
Athletic stencil kits
S-6400 D/M
Shuffleboard Kit
3 pc. 10’ T. x 6’ W.
Built to official National Standards
Court Specifications
S-6420 D/M
Hopscotch Kit
7’ 6” T. x 2’ W.
S-6425 D/M
Hopscotch Kit
9’ T. x 40” W.
S-6475 D
Complete Basketball Kit
S-6480 D
Basketball Court Circle Kit
7’ T. x 4’ W.
30
S-6510
Paper United States Map
35’ Tall x 36’ Wide
S-6520
Paper World Map
20’ Tall x 36’ Wide
Paper Maps - - - One Time Use Only
Business/home improvement
and decoration kits
**Business/Home Improvement & Decorative Stencil Kits are designed to be used with most skid resistant and concrete stain products. They will produce beautiful and lasting imitation Brick, Tile, Cobble, or Natural Stone designs on unattractive surfaces (driveways, sidewalks, decks, steps, etc.). These can be used at a place of business, home, health, club, sports facility, retirement center, swimming pool, or anywhere cosmetics, resurfacing, and safety may be a problem. Most skid resistant products used in this process can be sprayed using a commercial grade hopper gun. **Kits are engineered to butt together or overlap forming continuous patterns. Kits include: (4) 4’ x 8’ sheets, exception: S-5725 and S-5760. +/- 128 sq. ft. coverage. All patterns have an average 1/2” grout.
S-5710 D/M
Traditional Brick
Regular brick size: 3 1/2” x 7 1/2”
(sq. ft. 128)
S-5711 D/M
Basket weave Brick
Regular brick size: 3 1/2” x 7 1/2”
(sq. ft. 128)
S-5712 D/M
Diagonal Herringbone Brick
Regular brick size: 3 1/2” x 7 1/2”
(sq. ft. 99.62)(overlaps)
S-5713 D/M
Diagonal Brick
Brick size: 3 1/2” x 7 1/2” & 3 1/2” sq.
(sq. ft. 113.76)(overlaps)
S-5714 D/M
Serpentine Brick
Average brick size: 4” x 6”
(sq. ft. 106.39)
S-5720 D/M
Square Tile
6” Square (sq. ft. 128)
S-5721 D/M
Square Tile Offset
Brick Size: 7 1/2” sq. & 3 1/2 sq.
(sq. ft. 114.34)
S-5722 D/M
Cross Tile
Brick Size: 3 1/2” sq. & 6” sq.
(sq. ft. 115.01)
S-5723 D/M
Random Brick
Brick Size: 3 1/2” sq., 7 1/2” sq.,
3 1/2” x 7 1/2”
(sq. ft. 128)
31
S-5725 D/M
Spanish Tile/ Hexagon
7 1/2” hexagon, (8-pack)
(sq. ft. 83.16)
S-5730 D/M
Key Stone/ Octagon Square
Tile Size: 3 1/2” sq., 5 1/2” sq.
(sq. ft. 100)
S-5740 D/M
European Fan Cobble
48” radius, +/- 6” square cobble
(sq. ft. 54.29)
S-5741 D/M
European Circle Cobble
42” radius, +/- 3 1/2” x 7 1/2” cobble
(sq. ft. 85.57)
S-5742 D/M
European Straight Cobble
+/- 3 1/2” to 7 1/2”
(sq. ft. 120.67)
S-5750 D/M
Natural Stone
Varies from 4” to 18”
(sq. ft. 128)
S-5755 D/M
Basket Swirl
Brick Size: 3 1/2” x 7 1/2”
(sq. ft. 128)
S-5756 D/M
Diamond Swirl
Brick Size: 7 1/2” x 3 1/2” & 3 1/2” sq.
(sq. ft. 126.01)
S-5760 D/M
Soldier Border Brick
Brick Size: 3 1/2” x 7 1/2” (20-pack)
(sq. ft. 108.61) (overlaps)
32
© C
op
yri
ght
PT
M
20
12
Mad
e w
ith
Pri
de
in t
he
U.S
.A.
6339 S
crub P
ine
Rd. B
ig S
andy,
TX
75755
1 (
800)-
345
-7969
DISCONTINUED PRODUCT SALE
Polymer Spray Tips
Polymer Spray Tip Kit
Polymer Spray Tip Kit
Polymer Spray Tip Kit
Polymer Spray Tip Kit
Polymer Spray Tip Insert Only
Polymer Spray Tip Brass Body
Polymer Spray Tip Brass Body
80/50 - 1/4” N.P.T., with (1) body & (2) inserts
80/50 - 3/8” N.P.T., with (1) body & (2) inserts
80/50 - 1/4” N.P.T., with (2) bodies, (10) inserts
80/50 - 3/8” N.P.T., with (2) bodies, (10) inserts
80/50
1/4” N.P.T.
3/8” N.P.T.
PT-8052-12
PT-8053-12
PT-8052-210
PT-8053-210
PT-805T
PT-805X
PT-805Y
Product Name Description Product Number
50% OFF
Foam Bedding Material
Product Name Description Product Number
Foam Bedding Material
Foam Bedding Material
Foam Bedding Material
Foam Bedding Material
1 1/2” x 350’ / bag
2” x 200’ / bag
1 1/8” x 600’ / bag
7/8” x 1050’ / bag
BM-1050
BM-2000
BM-1018
BM-87L
Bear Claw
Product Name Description Product Number
Bear Claw without Air Supply
F
Claw
Adjustable depth claw, 1/4” thick, 3/4” B.I.P.,
Painted Handle
Steel insert, 1/4” x 1” x 4”
BC-5
F
BC-C
Work Pad 2000
Product Name Description Product Number
Work Pad 2000 Comes with (1) junior legal pad and pen WP-2000
While supplies last!!