PARTS Edition 2013 - Tri-Power Sales & Service, Inc.tripowersales.com/DownEaster/Downeaster Parts...

Printed in USA PRICES SUBJECT TO CHANGE WITHOUT NOTICE. NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.

Booklet Part # SPB52-13

1/30/2014 Rev B

Distributed by:

www.downeastermfg.com Replacement parts

PARTS Edition 2013

or email us to order:

[email protected]

DownEaster Products120 Old Lisbon RD. - Topsham, ME 04086

PH (207) 729-5101 - Fax (207) 729-8782

Rev A

Spreader Pricing Page

14" CONVEYOR ASSEMBLY - ALL LENGTHS 4

14" STANDARD CHUTE ASSEMBLY 5

14" FLIP CHUTE ASSEMBLY 6

14" 2/3 YARD ELECTRIC CHUTE ASSEMBLY 7

GAS DRIVE PLATFORM ASSEMBLY 8

ELECTRIC DRIVE PLATFORM ASSEMBLY 9

HYDRAULIC DRIVE PLATFORM ASSEMBLY 10

HYDRAULIC DRIVE HOSES & PARTS 11

14" SERIES - FEED GATE / INVERTED DEFLECTOR 12

14" & 24" CONVEYOR SERIES - SCREEN ASSEMBLIES 13

14" MODULAR HOPPER EXTENSION PARTS 14

STANDARD CONTROL BOX WIRING (post 2013) 15

CHOKE INDICATOR WIRING 16

GAS PLATFORM / DRIVE - WIRING HARNESSES 17

18

24" CONVEYOR REAR DRIVE PARTS 20

24" CONVEYOR IDLER & ADJUSTER PARTS 21

24" SERIES SPINNER & DISTRIBUTOR PARTS 22

24" SERIES HOPPER & FEED GATE PARTS 23

IP-140 TAILGATE SPREADER PARTS 25

IP-140 ADAPTORS 26

IP-150 DUMP BODY ADAPTOR PARTS 27

DDS DROP SPREADER PARTS 28

CUSTOM PINTLE CHAIN PRICING / ROLLER CHAIN REFERENCE CHART 29

CUSTOM PINTLE CHAIN ORDER FORM 30

12" CONVEYOR ASSEMBLY - ALL LENGTHS 32

12" CHUTE & DRIVE ASSEMBLY 33

12" 2/3 YARD CHUTE & DRIVE ASSEMBLY 34

12" SCREEN & INVERTED DEFLECTOR ASSEMBLIES 35

12" & 14" FEED GATES 36

12" & 14" POLY HOPPER 37

GEAR BOX SEALS & BEARINGS 38

1/2 & 3/4 HP ELECTRIC (single/dual motor) WIRING

TABLE OF CONTENTSDescription

REPLACEM

ENT PARTS 14" C

ONVEYOR SERIES

To order: Call 207-729-5101 Fax 207-729-8782 email: [email protected] Rev C

KEY PART # DESCRIPTION QTY.

1 Conveyor chain, 662, 12.25" centers, crossbars every 2nd link, black

SPV1402 14" x 2' conveyor chain, 35 links, 3/16" x 3/4" crossbars 1







2 SPGV114 14" Conveyor chain crossbar/link assy ( NO PINS ) 1

N/A SPV111 Single Master Link (662), includes 2 pins w/ cotters, 1-5/8" pin to pin 2

3 SPV113 Pin w/ cotter (1/4x1 5/8) w/ cotter (straight edge no ridge ends) 2

4A SCA102 14" idler shaft assy (old P/N SPGV130) w/ adjusting bolts. 1

4 SPGV131 Idler shaft, 1.125 x 19 1/8" 1

5 SPV131 Idler shaft bearing, for 1.125" shaft 2

6 SPV118A Conveyor drive / idler sprocket, D662, 6T x 1.125, with keyway 4

7A SCA104 14" Drive shaft assembly (old P/N SPGV115) w/ hardware 1

7 SPGV116 14" Conveyor driveshaft, 1.125 x 19 7/8" 1

8 SPV132 Driveshaft bearing, 1.125" shaft 2

9 HWF352 Key, 1/4x2", conveyor driveshaft or clutch 4

10 SCA108 Driveshaft coupling (fasteners not included: 2-HWF186, 2-HWF389) 1

11 SCA112 Bolt, 3/4" X 6" adjusting tap bolt, mild steel, zinc plated, nuts included 2

12 SKA410 Transmission Mount, bolt on, stainless only (hardware included) 1

13 SPV121A Gearbox gas - Worm gear reducer, 20:1 output shaft 1-1/8" (includes hardware) 1

14 HWF350 Key, square 1/4x1" engine shaft 1

15 SPV123A 40B-16 x 1" Gearbox input shaft sprocket (gas drive only ) 1

16 SPV121E

Gearbox, 14" electric, 50:1 reducer, (output shaft 1 1/8" X 16 1/2") (includes mounting hardware) 1

17 SPV123C 40B-26 x 1" Gearbox input shaft sprocket (electric drive only ) 1

N/A SCA110 Chain sweep assembly, 14" conv., includes mounting hardware. (SS) (not shown) 1

14" CONVEYOR ASSEMBLY - ALL LENGTHS

FOR ITEM 21, SEE PAGES 8-9. P/N SPV124


KEY DESCRIPTION QTY.

1A SKC001SG(H) SKC005PG(H) Complete SHORT chute assembly -

1A SKC002SG(H) SKC006PG(H) Complete LONG chute assembly -1 SKC100S SKC100P Chute wrapper assembly, short 14", (no deflectors) 1

2 SKC201S SKC205P Deflector assembly, front bolt on 1

3 SKC202S SKC206P Deflector, Curb side, w/ adjustment rod & hardware 1

4 SKC203S SKC207P Deflector, Rear, w/ adjustment rod & hardware 1

5 SKC204S SKC208P Deflector, Road side, w/ adjustment rod & hardware 1

6 SKC112S SKC112P Standard Chute extension, 12", w/ hardware 1

7 SKC302 Chain tensioner, stainless only 1

8 Tension adjustment bolt w/ nuts 1

9 Collar w/ set screw 5

10 compression spring 3

10A Rod, for chute deflector adjustment. 311A Complete short shaft assy, 23" long (gas & electric ) 111B Complete short shaft assy, 23" long (hydraulic ) 111C Complete long shaft assy, 35" long (gas & electric ) 111D Complete long shaft assy, 35" long (hydraulic ) 1

12 Spinner disc, 14" diameter, stainless only 1

Spinner disc, 14", polypropylene, 1

13 Shear pin 114 40B-26 x 7/8" Spinner shaft sprocket (gas & electric ) 1

40B-48 X 7/8" Electric sprocket serial# less than 7513 -

15 Lovejoy 7/8" hub, ( for hydraulic & variable speed only ) 1

- Lovejoy 099/100 spider sox 1

16 Keyway, 3/16" x 1" 1

17 Spinner bearing and pillow block 2

18 Spinner shaft only, 7/8" x 23" (reg. chute) 1

19 Spinner shaft only, 7/8" x 35" (long chute) 1

- HWF565 HWF564 Hardware/Bolt kit for Gas Sanders 1

- HWF567 HWF566 Hardware/Bolt Kit for Chute Ext. 1

HWF354

SPS109B

SPS102A

SPS103

14" STANDARD CHUTE ASSEMBLY (after serial # 10335 )

SKC314S

HWF455

SPS110

SPN130

SPS107A

SPS107D

SPS112A

SPS112C

SKC330

PART #Stainless / painted

HWF165

HWC100

SPH128

SPGS104D

SPS111

SPN129C

SEE PAGES 21, 22, 23 FOR UPPER

LOVEJOY.

1 YARD+ ELEC.

AFTER S/N 7512

To order: Call 207-729-5101 Fax 207-729-8782 email: [email protected] Rev B

14" FLIP CHUTE ASSEMBLY (after serial # 10335 )


21A SKC003SG(H) SKC007PG(H) Complete SHORT flip chute assembly -

21A SKC004SG(H) SKC008PG(H) Complete LONG flip chute assembly -

21 SKC102S SKC102P FLIP Chute wrapper assembly, 14", (no deflectors) 1

22 SKC101S SKC101P Upper flip chute rail bracket 1

23 SKC103S SKC103P FLIP Chute extension, 12", w/ hardware 1

24 SKC420 Pin, for flip chute pivot & retention. Stainless only. 2

- Hardware kit, for extension only. 1

- HWF569 HWF568 Hardware kit, for Flip chute. 1

27A Upper flip shaft assembly (gas & electric ) 1

27B Upper flip shaft assembly (hydraulic & DUAL elec. ) 1

28A Lower short flip shaft assembly 13" 1

28B Lower long flip shaft assembly 25" 1

29 Upper shaft, (short or long), shaft only 9" 1

30 Lower shaft, (short ), shaft only 13" 1

31 Lower shaft, (long ), shaft only 25" 1

32 Upper shaft receiver collar, (w/ pin) 1

* For items numbers not listed on this page, see previous page(s) All items in numerical order from page 18

SPS114

SPS121

SPS113

SPS125

SPS117

Long flip chutes from 2005 thru 2010 are discontinued and should be superseded by items 23 & 21.

All flip chutes prior to 2005 are obsolete.

SPS120

SPS112

SPS118

HWF840


SEE PAGES 9, 10, FOR UPPER LOVEJOY.



34A SKC009S(H)

34 SKC105S N/A Deflector bracket and bearing support, Stainless 1

35 SKC209S N/A Deflector, front bolt on, Stainless, (post 2011) 1

(for Baby, JR., & Gator models only)

36A Short shaft assy, . for single motor only. 1

(supersedes SPD107E before serial # 7608)

36B Short shaft assy, . for dual elec. motor only 1

37 Spinner shaft 16" for 1/3 yard - 2/3 yard 1

- HWF565 Hardware/Bolt kit 1


14" 1/3 & 2/3 YARD ELECTRIC CHUTE ASSEMBLY

Complete chute assembly w/ shaft, spinner & hardware.

SPS107C

SPS126


SPS102B

SEE PAGES 9, 10, FOR UPPER LOVEJOY.

14" CONVEYOR SERIES ONLY,

AFTER SERIAL # 10830

To order: Call 207-729-5101 Fax 207-729-8782 email: [email protected] Rev D


- SKA001S SKA001P Complete Briggs & Sratton platform assembly

- SKA002S SKA002P Complete Honda platform assembly

1 SKA402S SKA402P Platform, gas & gas/hydraulic, multi use 1

2 SKA408 N/A Motor mount, gas, Briggs & Honda, ( after 2008 ) 1

3 SKA412S SKA412P Engine Cover, Gas & Gas/hydraulic 1

3A Hood gasket, 29" 1

4 SKA418 N/A Chain guard, spinner, gas & electric platform, 1

5 SKA417 N/A Chain guard, gearbox, gas platform, 1

6 SKA428 N/A Relocation gas tank bracket, Briggs & Stratton only. 1

7 SKA400 Briggs & Stratton exhaust pipe assembly 1

8 SKA416 Splash guard, bolt on, gas platform, Stainless only 1

9 SKA420 Throttle control assembly, Briggs, inc. hardware 1

10 SKA422 Throttle control assembly, Honda, ( after 2008 ) 1

- Throttle control motor ONLY, 4 mounting lugs 1

11 Momentary switch only, 2 pole 1

11A SKA424 Choke plunger switch assembly w/ bracket, Briggs 1

11B SKA426 Choke plunger switch assembly w/ bracket, Honda 1

11C SPN123A Nylon throttle control Link, Briggs & Stratton 1

12A Briggs & Stratton 10.5 HP INTEK OHV 1

12B ENGINE-HONDA 11 HP 1

13 Solenoid for Briggs 1

14 Absorbed glass mat battery, 7.5x5x7 (LxWxH) 1

15 BRIGGS /HONDA battery cable set 1

16 Battery tie down strap assembly w/ buckles. 1

17 40BS-12HT x 1" engine sprocket w/ set screw & key 1

18 40A52 3 clutch sprocket, 52 teeth, w/ bolts 1

19 Electric clutch w/ centrifugal friction drive 1

20 Collar 1" locking, electric clutch w/ 1 set screw 2

21 Gearbox shaft bearing, 1" 1

22 #40 Roller chain, 75 pitch 1

23 Master link for roller chain 1

24 Rubber hold down latch / keeper 2

SPN121

For replacement parts related to or call us direct.

SPN113A

SPN119 / SPN119A

SPV124

SPN112C

SPN104A

HWC110

SPN109

SPN111

SPE119 / SPE116

SKA470

SPN107

SPE116A

14" GAS DRIVE PLATFORM ASSEMBLY

SPN100A

SPN100B


SPN125

SPN122D



- SKA004S SKA004P Complete 1/2 HP platform assembly

- SKA005S SKA005P Complete 3/4 HP platform assembly

30 SKA404S SKA404P Platform, electric, for 14" conv. 1

31 SKA406 N/A Motor mount, electric, Stainless w/ hardware. 1

32 SKA414S SKA414P Engine Cover, Electric, for 14" conv. only 1

33 Hood Gasket, channel with bulb, 20" 1

34A Electric motor, 12V, 1/2 hp, Stainless only 1

34B Electric motor, stainless, 12V, 3/4 hp 1

35A Pigtail assembly, 1/2 HP motor only, 6 GA wire 1

35B Pigtail assembly, 3/4 HP motor only, 4 GA wire 1

36 40B-11 x 5/8" elec. motor sprocket w/set screws 1

37 40B-20 x 1" gearbox shaft sprocket, 1

38 #40 Roller chain, 55 pitch 1

39 Key 3/16x1" spinner sprocket key 1

40 Electric sander harness, w/ gray connector 1

41 Conduit box for electric motor 1

42 Gasket for conduit box cover 1

43 Conduit box cover 1

for Dual electric motor, variable speed control

45 Spinner motor .1/2 HP 1

46 Lovejoy 1/2" hub with 1/8" keyway 1

47 Spacer, chrome 3/4 OD, 3/8 ID 4

48 Pigtail harness for all spinner motors 1

49 Lovejoy 099/100 spider sox 1

see page 31 for control box, switch parts & COMPLETE RETRO FIT KIT.

50 Variable speed control, wire harness 1


SPE114G

SPN129C

SPN121

SPE154

SKA448

SKA450


SPE121C

HWF354

SPN134

SPE135

SPN132

This platform also used in conjunction with the 12" & 14" conveyor poly hoppers.

SPE122

SPN129B

SPE100B

14" ELECTRIC DRIVE PLATFORM ASSEMBLY

SPE118

SPN135

SPE138

SPV123B

SPN112J

To order: Call 207-729-5101 Fax 207-729-8782 email: [email protected] Rev D

KEYPART #

Stainless / paintedDESCRIPTION QTY.

- SKA007S /SKA007P

55 SKA409 Motor support mount, self contained only 1

56 SKA432 Spinner motor mount, SC and direct hydraulic 1

57 SKA427 Choke switch assembly, JD &Honda SC 1

58 SKA430 Throttle control motor, SC JD & Honda 1

59 SKA440 Reservoir tank, SC hydraulic, 4.5 gallon 1

61 N/A JD Tec 5.5 hp engine no longer available.

SKA200R Motor Replacement kit Assembly, Honda

61 SPN100D Honda engine 5.5 HP w/ electric start 1

62 SPH116 Hydra mount for 5.5 HP/Hyd 1

63 SPH112 Hyd Pump C204 for 5.5HP/Hyd* 1

64 SPN130A Lovejoy, 3/4" w 3/16" key ( engine shaft ) 1

65 SPN130B Lovejoy 5/8" w 3/16" key, hub L-095 (spinner motor) 1

66 SPN129C Lovejoy 90/095 spider sox 1

67 SPHL104 Hydraulic motor, for , conveyor drive, 4 bolt* 1

68 SPH114 Hyd Spinner Motor 1

69 SPH115 Valve block (includes valve, solenoid, pressure relief ) 1

70 SPGH104 Coupler, self contained hydraulic 1

71 SPN130C Lovejoy, 7/16" w 3/32" key ( pump shaft ) 1

72 SPH117 Hydraulic filter assembly (filter & head) 1

73 SPH125 Hydraulic Filter only 1

74 SPH118 Filter Breather Assembly 1

75 SPE159 Battery cable set 1

76 SPH122 Valve , (replacement part only) 1

77 SPH123 Coil w/ plug (replacement part only) 1

78 SPH124 Valve screen 1

79 SPH120 Check valve 1

80 SPE156 Voltage regulator 1

81 SPH126 Filler cap 1


For replacement parts related to call us direct. see next page for hose assemblies.

HYDRAULIC DRIVE PLATFORM ASSEMBLY

Complete platform assembly w/ sander harness

USE DEXTRON 3 OR EQUIVALANT FOR HYDRAULIC FLUID

CHOKE ACUATOR, PRE 2009, SEALED LINEAR SOLIENOID

P/N SPE146 $67.98 / $50.35

To order: Call 207-729-5101 Fax 207-729-8782 email: [email protected] Rev A


84 TPM108 O ring boss elbow 3/4" X 3/8" JIC 2

85 TPH121 Elbow cylinder 2

86 TPH148 JIC o-ring connector 4

87 TPH149 JIC conn to pipe 2

88 TPH155 Elbow fitting 3/8 male x 3/8 male 3

89 TPH147 Elbow 3/4" X 3/8" JIC 2

90 TPH163 O Ring male npt adapter 1

91 SPH120 Check Valve 1

93 TPH201 Hydraulic hose assembly, 3/8" hose 12" length 1



96 TPH203 Hydraulic hose assembly 3/8" hose 32" length 1


98 TPH207 Hydraulic hose assembly, 3/8" hose 3 1/2" length 1

(fittings not included in hose assemblies)

HYDRAULIC DRIVE HOSES & PARTS



1 SGA001 Feed gate assembly (COMPLETE) Stainless only, 14" conv (serial #9297 & up) 1

2 SGA201 Feed gate (1 pc), Stainless only , includes hardware 1

3 SGA203 Feed gate handle assembly, Stainless only 1

4 SGA205 Handle lock & shim, Stainless only 1

5 SGA207 Feed gate keepers, Stainless only (left & right) (set) 2

6 SGA209 Feed gate salt flap assembly 1

7 SPG110 Handle grip, gate arm, rubber w/ finger grips 1

8 SPG103A Gate lock knob, Male 1


- SHAV606 Inverted V conveyor deflector, bolt in, stainless, 6' long, for 7' & 8' hopper 1

- SHAV607 Inverted V conveyor deflector, bolt in, stainless, 7' long, for 9' hopper 1

- SHAV608 Inverted V conveyor deflector, bolt in, stainless, 8' long, for 10' hopper 1

SPILL SHIELDSKEY PART # DESCRIPTION QTY.

-SXO1250SS

Spill shield, for 50" wide modular hopper, front or rear, stainless only. 11" extension. bolt on, includes hardware.

-

- SXO1271SSSpill shield, for 71" wide modular hopper, front or rear, stainless only. 11" extension. bolt on, includes hardware.

-

14" SERIES - FEED GATE / INVERTED DEFLECTOR / SPILL SHIELDS

SEE PAGE 43 FOR FEED GATE PARTS PERTAINING TO SERIAL NUMBERS BELOW 9296OR PARTS PERTAINING TO 12" CONVEYOR SERIES



1 SKS008 Screen assembly, 8' (3.3, 4.0 yard) (O.A. size 33 1/4 x 91 1/2) 2

2 SKS009 Screen assembly, 9' (3.4, 3.3, 4.2 yard) (O.A. size 33 1/4 x 103 1/2) 2

3 SKS010 Screen assembly, 10' ( 4.0, 5.0, 6.0 yard) (O.A. size 33 1/4 x 115 1/2) 2

4 SKS003 Screen assembly, 3.5' (1.2, 1.7 yard) (O.A. size 46 5/8 x 39 1/2) 2

5 SKS004 Screen assembly, 4' (.66 ( JR.), 1.4, 2.0, 2.5 yard) (O.A. size 46 5/8 x 45 1/2) 2

N/A SKS004A Screen assembly, 4' (.033 yard, Gator only ) (O.A. size 30 5/8 x 45 1/2) 1

6 SKS005B Screen assembly, 4.5' (2.2 yard) (O.A. size 46 5/8 x 51 1/2) 2

7 SKLS03L Screen assembly, 3' (O.A. size 33 1/4 x 39 1/2) v

8 SKLS04L Screen assembly, 4' (O.A. size 46 5/8 x 39 1/2) v

Discontinued 27 1/4" wide screens for 59" wide series hopper

SPH110B Screen assembly, 9' (3.0 yard) (O.A. size 27 1/4 x 103 1/2) 2

SPH110D Screen assembly, 10' (3.3 yard) (O.A. size 27 1/4 x 115 1/2) 2

Discontinued screen for POLYETHELENE series hopper

SKS075 Screen Assembly, 7.5', for 50" wide, poly hopper. (O.A. size 45" x 85 1/2" ) 1

14" & 24" CONVEYOR SERIES - SCREEN ASSEMBLIES



71" WIDE HOPPER SERIES

1 SEE001S SEE001P Endplate extension, 0" High, (3.0, 3.4 yard) 2

2 SEE004S SEE004P Endplate extension, 4" High, ( 3.3, 3.7, 4.2 yard) 2

3 SEE008S SEE008P Endplate extension, 8" High, (4.0, 4.5, 5.0 yard) 2

4 SEE013S SEE013P Endplate extension, 13" High, (6.0 yard) 2

SSE408S SSE408P Side plate extension, 4" High, 8' ( 3.3 yard) 2






7 SSE1310S SSE1310P Side plate extension, 13" High, 10' ( 6.0 yard) 2

8 SME571S N/A Spreader channel, 5" High, (8" & 13" side ext.) 1

9 SME371S N/A Spreader channel, 3" High, (4" side ext. only) 1

Hardware kit, 3.0 yard extensions 1

Hardware kit, 4.0 , 5.0 yard extensions 1

Hardware kit, 6.0 yard extensions 1

50" WIDE HOPPER SERIES

- SEE505S SEE505P Endplate extension, 5" High, (2.5 yard) 2

- SSE508S SSE508P Side plate extension, 5" High, 8' (2.5 yard) 2

KEY PART #STAINLESS

PART #PAINTED

DESCRIPTION QTY.

- SHE3308S SHE3308P 4" high, 8' long (3.3 yard) -- SHE3709S SHE3709P 4" high, 9' long (3.7 yard) -- SHE4210S SHE4210P 4" high, 10' long (4.2 yard) -- SHE4008S SHE4008P 8" high, 8' long (4.0 yard) -- SHE4509S SHE4509P 8" high, 9' long (4.5 yard) -- SHE5010S SHE5010P 8" high, 10' long (5.0 yard) -- SHE6010S SHE6010P 13" high, 10' long (6.0 yard) -- SHE2508S SHE2508P 5" high, 8' long (2.5 yard) 50" wide -

MODULAR HOPPER EXTENSION PARTS

COMPLETE EXTENSION UNITS, Endplate, side plate, spreader bar & hardware kit.

6

5

HWF756

HWF750

HWF752




SPE108A Control Box, Complete, Gas Spreader, Rocker Switches 1

1 SPE107B Clutch engage switch,(orange) rocker 1

2 SPE107C Throttle control switch, rocker style 1

3 SPE107A Ignition switch,(green) rocker style 1

4 HWE145 Control box indicator light, red LED 1

5 SPE104 Fuse holder cover, rocker switch control box 1

6 SPE105 Control Box Fuse, 10 Amp 1

7 SPE109A Cab wire harness, for rocker switch control box (SPE108A) 16' 1

HWE140 Cigarette Adapter Male w/ 8' cord

SKK001Standard control box assembly, gas & gas/hydraulic, for 14" conv.

includes all hardware, plugs, switches, and cab harness.1

NOTE: 2013 models starting w/ serial # 11572 , will be wired as such, the choke light plunger switch,will now ground out the choke indicator light, and not send power to it. Supplied w/ the control box kit will

be a retrofit, green 16 GA, wire w/ spade and lug terminal ends, to convert units manufactured pre 2013.REMOVE & DISCARD the red power wire from plunger switch to sander solenoid , and replace with green wire,

spade end on switch and ring terminal end on the nearest 5/16" bolt on the throttle control bracket. Reuse existing nut to fasten ring terminal, and tighten accordingly. ( This is for retrofit only! Do Not modify factory harness. )

STANDARD CONTROL BOX WIRING (post 2013)

Questions? Call 207-729-5101 16 Rev A

CHOKE INDICATOR SWITCH WIRING (post 2013)NOTE: 2013 models starting w/ serial # 11572 , will be wired as such; the choke light plunger

switch will now ground out the choke indicator light and not send power to it. Supplied, w/

the control box kit, will be a retrofit, green, 16 GA, wire w/ spade and lug terminal ends. This

will convert units manufactured pre 2013. REMOVE & DISCARD the red power wire, from the

plunger switch, to sander solenoid and replace with the green wire. The spade end goes on the

switch and ring terminal end on the nearest 5/16" bolt, on the throttle control bracket. Reuse

the existing nut to fasten ring terminal and tighten accordingly.

( This is for retrofit only! Do Not modify factory harness. )

SUPPLIED GREEN WIRE P/N SKK518

EXISTING WHITE WIRE TO CONTROL BOX

THROTTLE CONTROL & BRACKET


PART # DESCRIPTION QTY.

- SPE114C 10' hopper wire harness (length: 14'), Briggs & Stratton 1

- SPE114F 10' hopper wire harness (length: 14'), Honda 1

- SPE175 Wire Harness, for self contained hydraulic only 1

- SKK002B Wireless Control assembly, complete ( POST 2012 ) 1

- SPE170 Wire Harness, for wireless control box w/ 6 way female plug 1

- SPE153 Replacement Remote Control Transmitter 1

- HWE362 Toggle switch 1- HWE145 Choke Indicator red Light 1

Wireless Control assembly, complete ( PRE 2013 )* SKK200 Wireless Control Kit, complete RETROFIT ONLY, 1

GAS PLATFORM / DRIVE - WIRING HARNESSES



1 SPE161B Harness switch assembly, includes switch, harness & bracket 1

1A SPE107B On /Off / Mom. engage switch,(orange) rocker 1

1A HWE181 Push Pull Switch heavy-duty, 2 position, brass and chrome (before 6-2011) 1

1B SKA446 Mounting bracket, stainless, for one rocker switch 1

2 SPE132 Circuit breaker, 120 amp 1

3 SPE180 Fuse, 10 amp. (fuse only, no holder) 2

3A SPE182 Fuse, 40 amp. (fuse only, no holder) 1

4 SPE123 Solenoid, 12V Steel Case w/slots. 1

5 SPE127A Motor end wire pigtail, box spreader, 6-ga wire in loom with connector 1

6 SKA450 Pigtail assembly, 3/4 HP electric motor only, 4 GA wire 1

6A SPE127B Motor end wire pigtail, IP-140 ONLY , 6-ga wire with connectors 1

7 SPE144 Speed control for electric sander. 1

7A SPE114G Variable speed control wire harness 1

8 SPE135Electric sander harness, truck side (battery cables only)(consist of (1) 20' red, (1) 23' blk, (2) 16" red harness) 1

9 SPE100B Pigtail harness for all spinner motors 1

10 SPE144C Wiring harness & on/off switch kit, for Sure-FlowZ-200 vibrators 1

11 SPE144B Sure-FlowZ-200 vibrator 1

N/A HWE224 WeatherPak Housing Dual Power Link w/spring Gray & 6 ga lugs

N/A HWE224A WeatherPak Housing Dual Power Link w/spring Red & 6 ga lugs

- SKK003 Standard Electric On/Off control. (12", 14" conv. & IP-140) 1

- SKK004 Variable Speed Electric control, dual motor only. (12", 14" conv. & IP-140) 1

- VSC01 Variable Speed Control Kit for Electric V-Box Spreader 1

- VSC01A Variable Speed Control Kit for Tailgate Spreader 1

1/2 & 3/4 HP ELECTRIC (single/dual motor) WIRING

COMPLETE REPLACEMENT HARNESSESincludes truck harness, switches, solenoid, circuit breaker

COMPLETE DUAL ELECTRIC, VARIBLE SPEED OPTION , (controls spinner speed only)

REPLACEM

ENT PARTS 24" C

ONVEYOR SERIES



1A

SPHL111 Conveyor chain 9' 109 links, 1








2 HWF418 Pin, 7/16" for 667 Chain Link 2

2A SPHL108 Single conveyor chain Bar weldment, w/links, pins & cotters -

N/A HWF364 Conveyor chain single master link, 667, includes 2 pins w/cotters. 2

3 SPHL128 Bearing drive Shaft, 2" bore 2 bolt flange 1,2

SPHL119 Bearing drive Shaft, 1.5" bore 2 bolt, optional 50:1 gearbox 1

4 SPHL103 D667 B 6T, 2.00" bore w/keyway, drive sprocket 2

SPHL141 D667 B 6T, 1 1/2" bore w/ 3/8"keyway, drive Sprocket 2

5 SPHL140 Drive shaft, 2" for 6:1 gearbox, 1/2" keyways 1

6 HWF637 Key 1/2"x1/2"x 2 1/2'' for 2" shaft only 2

HWF358 Key 3/8"x3/8"x2" for 1 1/2" shaft only 2

7A SPHL106 gearbox (spur gear) , 6:1 speed reducer 1

7B SPHL107 Alternate, gearbox for 24" conveyors, worm gear, 50:1 reducer, 1

7C SPHL105 Gear box, (spur gear)w/sensor shaft 6:1 speed reducer, 1

10 SPHL104A Hydraulic motor, for 6:1 gearbox , 2 bolt 1

SPSL102 Hydraulic motor, for 50:1 gearbox, 4 bolt 1

12 HWF350 Key, square 1/4x1" 1

15 SPHL121 Chain wiper 3/8" Neoprene rubber 4" x 18" with 3 slots 2

16 SCAL320 Chain wiper back up bar, Stainless only 2

* For items 17, thru 23, or any other fastening hardware, call for part numbers and prices

* Items in dashed hidden lines are special custom order parts

Conveyor chain, 667, 20.25" center, 1/4" X 1-1/2" crossbars, painted black

1

24" CONVEYOR REAR DRIVE PARTS



1A SCAL102 Complete Idler adjustment shaft assembly, both sides (no wear plate) 1

1 SCAL100S Bearing slide brackets, for 24" idler shaft, stainless steel. 2

2 SPHL102 Hopper bearing, 1-1/4" bore 2 bolt flange 2

3 SMHL101 Idler shaft, 1.25" diameter 1

4 SPHL101 D667 B 6T 1.25" bore w/o keyway 2

5 SPHL130 Tension spring 2

6 SCAL105 Idler adjusting rods, 3/4-10 x 15" with welded nut , & jam nuts included 2

7 HWF180A Bolt 4

8 HWF495 Washer 4

9 HWF497 Washer , lock 4

10 HWF391 Nut, hex head 4

11 HWF520 Washer, 3/4" Zinc Plated 4

12 HWF410 Jam nut, 3/4-10 12

Conveyor wear plate, abrasion resistant, 3/16" thick, 23 1/2"x_____

SARP009 Conveyor plate, 9', 3/16" abrasion resistant, x 117" 1








Conveyor wear plate, Stainless steel, 3/16" thick, 23 1/2"x_____

SARP009S Conveyor plate, 9', 3/16" 304 Stainless steel x 117" 1

SARP010S Conveyor plate, 10', 3/16" 304 Stainless steel , x 129" 1


SARP012S Conveyor plate, 12', 3/16" 304 Stainless steel, x 153" 1





15

15

24" CONVEYOR IDLER & ADJUSTER PARTS



1A SKC200S SKC200P Complete chute assembly with spinner & motor

1 SKC202S SKC204P Chute assembly, welded, NO DEFLECTORS 1

2 SKC212S Metering lock 1

3 SKC210S SKC210P Deflector assembly 3

4 Pin, Hitch, Size 3, Zinc Plated 3

5 18" Spinner disc assembly, w/ bolt on vanes, stainless only 1

Spinner disc, 18" Molded poly w/ 6 vanes 1

6 Bolt on replaceable vanes, (hardware included) 6

7 Spinner hub assembly, 4 bolt, with keyed collar 1

8 Bolt 5/16-18x1" SS -

9 Nut 5/16"-18 nyloc SS -

10 Washer, 5/16" flat -

11 Hydraulic motor, for spinner 1

12 SKC218S SKC218P Chute extension ( standard 16" drop ) 1

SKC219S SKC219P Chute extension, long ( extended 27" drop ) 1

13 SKC220S Flip chute extension assembly (optional) 1

14 SKC224S Flip chute pivot bracket, stainless 2

15 SKC226S Flip chute lock bracket, stainless 2

16 SKC228S Flip chute pivot pins, stainless 3

- Hardware / bolt kit for 24" sanders, SS 1

0 Hardware / bolt kit for 24" sanders 1


HWF385

HWF423B

SMSL104

24" SERIES SPINNER & DISTRIBUTOR PARTS

SKC310

HWF605

HWF488A

SPSL102

SKC302S

SKC300S

HWF583

HWF582



1 Inverted deflector assembly, all parts 1

SVA1608S Inverted-V assembly, 8', for 9' & 10' 1




2 Side plate bracket 4

3 Cross channel 2

4 H beam assembly, 6" H-beam w/ hinges 1

5 Side stake / tie down chain pocket 4

6 Lifting eyelet, stainless (option @ factory) 4

7 Feed gate, stainless only 1

8 Screw jack assembly, , w/ bolt on bracket 1

9 Handle assembly, for screw jack. 1

9A plastic knuckle joint

10 Handle, round yellow 1

11 Label yellow/blk ruler 1

12 Arrow decal 1

Label, Danger stay away from this area……….. 1

Label , Warning it is your responsibility………… 1

24" SERIES HOPPER & FEED GATE PARTS

LBL113

LBL127

DEDP204

LBL126

N/A

SPHL125

SGA303

call

call

call

call

call


SGA301

SGA302

REPLACEM

ENT PARTS TAILG

ATE & SI

DEWALK

SERIES



1A IP140 Complete replacement unit

1 IP230 Hopper shell assembly, stainless 1

2 IP240 Top shell cover & hand guard, stainless 1

3 IP300 Drive chain guard, stainless, bolt on 1

4 IP250 Center salt deflector guard, stainless, bolt on 1

5 IP200 Spinner basket assembly, stainless, includes hanger rod 1

6 IP304 Deflector, left or right, stainless, bolt on 2

7 IP260 Feed gate with handle, stainless 18 IP424 Spinner guard, round, bolt on, for IP140, stainless. 1

9 IP314 14" spinner disc, stainless, bolt on with 3 bolt flange pattern 1

9A SPN129D Spinner Hub 1

10 IP220 IP140 mixing auger, with keyed shaft one end, painted black. 1

11 IP210 IP140 feed auger, with love joy and keyed shaft, painted black. 112 SPE121C Electric motor STAINLESS, 12v, 1/2 hp (no pigtail) see wiring page 1

13 SPV121D Gearbox (worm gear) 60:1 ratio 1

14 SPE122 Spinner motor 1

15 SPE100B Pigtail harness for all spinner motors. 1

16 SPN114C Chain tensioner, Poly 117 SPG103B Gate Lock Knob, Female thread 1

18 SPG103A Shaft lock knob, Male thread 1

19 SPS124 Spinner bar for IP140 tailgate spreader 1

20 HWF423D Pin, Lynch, 3/16" 1/2 x 5 cotter less (round with spring pin) 2

21 SPV124 Shaft bearing, for 1" diameter 222 SPV132 Shaft bearing, for 1.125" diameter 1

23 SPE141 Sprocket, 40B-16 x 1-1/8'' 1

24 SPV123A Sprocket, 40B-16 x 1" 1

25 SPN112H #40 roller chain, 39P + CL w/ master link 1

26 SPN113A Master link, for roller chain 1

27 SPN129A Lovejoy coupling, 1" hub bore 1

28 SPN129C Lovejoy, 099/100 spider sox 1see electric wiring page for harness and pigtails.

IP-140 TAILGATE SPREADER PARTS


KEYPART #

Stainless DESCRIPTION QTY.

1 IP450

2 IP452 Adaptor, 2004-2005', stainless, w/ hardware.

3 IP454 Adaptor, 2006', stainless, w/ hardware.

ADAPTORS FOR IP140

Adaptor, 2000-2004', stainless, w/ hardware.



1A IP150

1 SMA400 Mounting frame, adjustable 1

2 SMA402 Lower pin mounting brackets 1

3 SMA404 Upper pin / rod mounting brackets 1

4 SMA410 Deflector shield, left , stainless 1

5 SMA412 Deflector shield, right , stainless 1

6 SMA424 Deflector hinge, for composite shield only, stainless 1

7 SMA430 Deflector channel, with hardware, painted black 18 SMA442 Composite deflector, 1/4" HDPE, 16" x 24" 1

SPEV135 Pin, 3/4" diameter -

SPEV134 Pin, 1.00" diameter -

SPEV133 Pin, 1 1/8" diameter -

SPEV132 Pin, 1 1/4" diameter -

10 SPG103B Gate Lock Knob, Female thread 1

11 HWF607A Hardware/bolt kit for IP150 adapter kit 1

* Pin sizes determined by pin sizes on host vehicle

IP-150 DUMP BODY ADAPTOR PARTS

9*

Complete IP-150 dump body adaptor kit for tailgate spreader



DDS0344 DownEaster Drop Spreader, 1/3 yard, complete

1 DDS44S Hopper assembly, 44" , Stainless, shell only. ( NOT SHOWN ) 1

2 DDS120 Side door, for gear case 13 DDS100 Mixing tine assembly, Drop spreader, keyed shaft, one end only, 1

4 DDS104 Drop drum assembly, Drop spreader, keyed shaft, one end only, 1

5 DDS108 Tension rake shaft, Drop spreader, 1

6 DDS109 Tension rake spring only, w/ self tapping screws 1

7 DDS110 Tension rake shaft handle, w/ welded shaft. 1

8 DDS112 3rd link assembly, Drop spreader, with hardware 19 CALL Center link only ( NOT SHOWN )

10 DDS118 Shifter gate, 1/4" thick S.S. 1

11 DDS115 Top screen ( NOT SHOWN ) 1

12 SPHL143 Neoprene rubber 6" X 40" X 1/4" delivery drum gasket 1

13 SPHL144 Neoprene rubber 8" X 44" X 1/4" dump gasket 1

14 DDS113 Gasket backing bar top, 1

15 DDS114 Gasket backing bar lower, 1

16 DFH-5 40" x 2 3/4" 120 FS x FS Black PVC with 8 7/16" holes 1

17 TPH167 Hydraulic motor ( NOT SHOWN ) 118 TPH195 Hydraulic hose assembly 1/4" ( NOT SHOWN ) 2

19 SPE141 40B-16 x 1-1/8 Sprocket 1

20 SPV138 40B42 sprocket, 1-1/8" bore & 1/4" keyway 2

21 SPN112A 79P Roller chain w/ master link 1

22 SPN114C Chain tensioner, Poly 1

below parts not in illustration

23 SPV132 Shaft bearing, for 1.125" ( NOT SHOWN ) 4

24 TPL121 Rubber bumper, round, (2 1/2" diameter) 4

25 SPE157 Wiring harness, complete w/ 7 way round pole plug. 1

26 TPE104 LED tail light, 6" oval 2

27 DEDP290 LED back up / utility light, 6" oval 1

28 TPE111 LED 2" Amber clearance light 229 TPE173A Grommet , for oval taillight 3

30 TPE161 Grommet, for 2" marker lights 2

DDS DROP SPREADER PARTS


PART # DESCRIPTIONSPV133 662 Riveted pintle Chain only (price for 10 linear feet & over)

SPV137 667 Riveted pintle Chain only (price for 10 linear feet & over)

PART # DESCRIPTIONComplete 12" to 16" 662 chain

SCA300 Cross bar every 3rd link ( 3/16" x 3/4" flat bar) STANDARD $32.25 $25.80

SCA302 Cross bar every 2nd link ( 3/16" x 3/4" flat bar)

SCA303 Cross bar every 3rd link ( 1/4" x 3/4" flat bar) CUSTOM

SCA304 Cross bar every 2nd link ( 1/4" x 3/4" flat bar)

Complete 18" to 24" 667 chainSCAL400 Cross bar every 3rd link ( 1/4" x 1 1/2" flat bar) STANDARD

SCAL402 Cross bar every 3rd link ( 3/8" x 1 1/2" flat bar)



SCAL408 Cross bar every link ( 1/4" x 1 1/2" flat bar)

SCAL410 Cross bar every link ( 3/8" x 1 1/2" flat bar)

PART # DESCRIPTIONBriggs & Stratton

SPN112A 79P (bottom chain) spinner shaft to gearbox

SPN112B 77P (top chain, for S/N before 5405/ 2004 & down) engine to clutch

SPN112C 75P (top chain, for S/N after 5405/ 2005 & up) engine to clutch *1Honda

SPN112A 79P (bottom chain) spinner shaft to gearbox

SPN112C 75P (top chain, for S/N after 5404/ 2005 & up) engine to clutch *2SPN112D 67P (top chain, for S/N before 5405/ 2004 & down) engine to clutch

ELECTRIC 1yd+ (12" conveyor )

SPN112C 75P (top chain for S/N before 7608) motor to spinner shaft *3SPN112D 67P (bottom chain for S/N after 5469 & before 7608) spinner shaft to gearbox *4SPN112E 65P (bottom chain for S/N before 5470) spinner shaft to gearbox *5 SPN112G 71P (top chain for S/N after 7607) motor to gearbox *6 SPN112G 71P (bottom chain for S/N after 7607) spinner shaft to gearbox *6

ELECTRIC (14" conveyor )

SPN112L 63P (bottom chain for ALL 14" ELECTRIC CONVEYOR ONLY ) spinner shaft to gearbox

SPN112J 55P (top chain for ALL 14" ELECTRIC CONVEYOR ONLY ) motor to gearbox

ELECTRIC 1/3 &* 2/3 yd (12" conveyor )

SPN112D 67P (bottom chain for S/N before 5470) spinner shaft to gearbox *5SPN112E 65P (top chain for S/N before 7608) motor to spinner shaft *6SPN112F 67P (bottom chain for S/N after 5469 & before 7608/ w/half-link) spinner shaft to gearbox *4

SPN112G 71P (top chain for S/N after 7607) motor to gearbox *6 SPN112G 71P (bottom chain for S/N after 7607) spinner shaft to gearbox *6 SPN113A Master link for roller chain

SPN113B Offset link (half link) for #40 roller chain

*1 New universal platform

*2 New universal platform & motor turned 180° to exhaust rearward

*3 Old setup, 2 sprockets on spinner shaft, electric motor sprocket has 16T

*4 Old setup, 2 sprockets on spinner shaft but added chain tensioner

*5 Old setup, 2 sprockets on spinner shaft but before chain tensioner

*6 New setup, 2 sprockets on gearbox shaft, electric motor sprocket has 11T

CUSTOM PINTLE CHAIN PRICING

ROLLER CHAIN REFERENCE CHART


"

"

* Gas / Electric / Hydraulic

D662 (.125) / D667X (.170) / D667K (.200)*

Crossbar thickness 3/16 (.1875) / 1/4" (.250) / 5/16" (.312) / 3/8" (.375)

Crossbar width

Crossbar length (APPROX) "

Number of Links

Crossbarevery

link

(ex: 2nd, 3rd, 4th)Customer:

*custom pricing

Address: Distributed by:

Phone:

Chain type

CUSTOM PINTLE CHAIN ORDER FORM

(choose one each. line)

A = Center to center of sprockets / chain =

12" / 14" / 16" / 18" / 20" / 24"

Spreader type

Conveyor size

B = Center to center of pins =

REPLACEM

ENT PARTS 12" C

ONVEYOR SERIES



1Conveyor chain, 662, 10.25" centers, crossbars every 2nd link, black

VERIFY CHAIN LENGTH AND LINK COUNT, PRIOR TO PLACING ORDER

SPEV110D 12" x 2' conveyor chain, 35 links, 3/16" x 3/4" crossbars 1

SPEV110C 12" x 4' conveyor chain, 59 links, 3/16" x 3/4" crossbars 1

SPEV110B 12" x 6' conveyor chain, 107 links, 3/16" x 3/4" crossbars 1

SPEV110A 12" x 8' conveyor chain, 124 links, 3/16" x 3/4" crossbars 1

SPEV110F 12" x 9' conveyor chain, 137 links, 3/16" x 3/4" crossbars 1

2 SPEV114 12" Conveyor chain crossbar/link assy ( NO PINS ) 1

3 SPV113 Pin w/ cotter (1/4x1 5/8) w/ cotter (straight edge no ridge ends) 2

4A SCA102 14" & 12" idler shaft assy (old P/N SPGV130) w/ adjusting bolts. 1

4 SPEV131 12" idler shaft, (1.125" diameter x 14 1/4") 1

5 SPV131 Idler shaft bearing, for 1.125" shaft 2

6 SPV118A Conveyor drive / idler sprocket D662, 6T x 1.125, with keyway 4

6 SPV118D Conveyor idler sprocket D662, 8T x1.125 with keyway (pre 2010, above 1 yard) 4

8 SPV132 Driveshaft bearing, 1.125" shaft 2

9 HWF352 Key 1/4x2" conveyor driveshaft or clutch 411 SCA112 Bolt 3/4 X 6 adjusting tap bolt, mild steel, zinc plated w/ nuts 214 HWF350 Key, square 1/4x1" engine shaft 216 SPV121C (Worm Gear Reducer 50:1 Output Shaft (1 1/8" X 14 1/2") 117 SPV123B 40B-20 x 1" Gearbox input shaft sprocket (after serial # 7607 ) 2

N/A SCA111 Chain Sweep Assembly, 12" conv., includes mounting hardware. (SS) 1

Wear plates prior to serial #--------- 2006

N/A SCA306 Wear plate, 6.5' , HDPE plastic, white, 12" x 79" ( priced per foot. ) 1 $120.00

N/A SCA308 Wear plate, 8' , HDPE plastic, white, 12" x 93" ( priced per foot. ) 1 $120.00

N/A SCA308 Wear plate, 9' , HDPE plastic, white, 12" x 109" (2 pcs) ( priced per foot. ) 1 $150.00

12" CONVEYOR ASSEMBLY - ALL LENGTHS (1 yard & up)



1 SMC525 Chute wrapper assembly, short 12", (no deflectors) 1

2 SMC526S Deflector assembly, front bolt on 1

3 SMC509S Deflector, Curb side, 1

4 SMC527S Deflector, Rear, 1

5 SMC508S Deflector, Road side, 1

6 SMC528S Standard Chute extension, 12", w/ hardware 1

7 Chain tensioner, Poly (after serial # 5469) 1

8 SME535 Platform, for 1 yard & up spreaders 1

9 SME531 Engine cover, 1 yard & up only. 1

10 Sprocket, 40B16T-5/8" PRE SERIAL # 7608 1

10A Sprocket , 40B-11 x 5/8" AFTER SERIAL # 7609 1

11A Complete Short shaft assy, 23" long (gas & electric ) 1

11B Complete Short shaft assy, 23" long (dual ) 1

11C Complete Long shaft assy, 35" long (gas & electric ) 1

11D Complete Long shaft assy, 23" long (dual ) 1

14 40B-26 x 7/8" Spinner shaft sprocket (gas & electric ) 1

40B-48 X 7/8" sprocket serial# less than 7513 1

15 Lovejoy 7/8" hub, ( for dual electric only ) 1

16 Keyway, 3/16" x 1" 1


18 Spinner shaft only 7/8" x 23" (reg. chute) 1

19 Spinner shaft only 7/8" x 35" (long chute) 1

20 Label, Danger stay away from this area 1

THIS WILL INCLUDE CHUTES & DEFLECTORS,

LBL113

SPN114C

SPS111

NOT AVAILABLE

SPS102A

SPS103

HWF354

SPS109B

SPS110

SPN128B

SPS107A

SPS107D

SPS107A

SPE138

PLEASE CALL FOR PRICING ON PARTS THAT PERTAIN TO SERIAL NUMBERS LESS THAN 7608

SEE PAGE 22 FOR ELECTRIC MOTOR PART NUMBERS AND PRICING

SPS107D

NOT AVAILABLE

12" STANDARD CHUTE / ELECTRIC DRIVE ASSEMBLY

RETAILS.S. / Painted

DEALER

S.S. / Painted


Complete short chute assembly w/ shaft, spinner & hardware. Post 2006

SPE133A

1 YARD+ ELEC. AFTER S/N 7512



1 SMC532S Conveyor cover 1

2 SME538S Deflector assembly, front bolt on 1

3 SMC530S Deflector, Curb side, 1

4 SMC529S Deflector, Rear, 1

5 SMC531S Deflector, Road side, 1

6 SME536S Spinner mounting bracket 1

7 Chain tensioner, Poly 1

8 SMC550S Platform, for 1/3-2/3 yard only 1

9 SME552S Engine cover, for 1/3-2/3 yard only. 1

10 Sprocket, 40B16T-5/8" PRE SERIAL # 7608 1

10A Sprocket , 40B-11 x 5/8" AFTER SERIAL # 7609 1

11AComplete shaft assy, 16" long ( supersedes 15" shaft ) 1 40B-48 X 7/8" sprocket serial# less than 7513 1

14 40B-26 x 7/8" Spinner shaft sprocket (gas & electric ) 1

15 Lovejoy 7/8" hub, ( for dual electric only ) 1

16 Keyway, 3/16" x 1" 1


18Spinner shaft 16" for 1/3 yard - 2/3 yard( supersedes 15" shaft after S/N 7608 ) 1

20 Label, Danger stay away from this area 1

SPN130

HWF354

SPS109B

SPS102B

LBL113

PLEASE CALL FOR PRICING ON PARTS THAT PERTAIN TO SERIAL NUMBERS LESS THAN 7608

SEE PAGE 22 FOR ELECTRIC MOTOR PART NUMBERS AND PRICING

SPE133A

SPE138

SPS107E

SPS110

SPS111

SPN114C

NOT AVAILABLE

NOT AVAILABLE

12" 1/3 & 2/3 YARD CHUTE / ELECTRIC DRIVE ASSEMBLY




SPH109B Top-screen, 2 piece, Dx-1508e, (pcs are 45"x 42") 2

SPH109D Top-screen, 2 piece, for Dx-1008e (pcs are 39" x 43.5") 2

SPH109F Top-screen, 2 piece, for Dx-1206e, (pcs are 45" x 35") 2

SPH109C Top-screen, 2 piece, for Dx-2508e, (pcs are 61" x 43.5") 2


- SMH508FS Inverted V conveyor deflector, bolt in, stainless, 54" long, for 78" hopper 1

- SMH508DS Inverted V conveyor deflector, bolt in, stainless, 68" long, for 92" hopper 1

12" CONVEYOR SERIES - SCREEN ASSEMBLIES

12" CONVEYOR SERIES - INVERTED DEFLECTOR

DOES NOT INCLUDE CROSS BARS FOR HOPPER


KEY PART # NEW # DESCRIPTION QTY.

1 Call Feed gate assembly (COMPLETE) Stainless only, 14" or 12" conv 1

2 SMG501S 14" Feed gate (1 pc), Stainless only, (#9295 & below) 1

3 Call 12" Feed gate (1 pc), Stainless only, includes hardware 1

4 SMG504S 14" Feed gate Handle Assembly, Stainless only (#9295 & below) 1

5 Call 12" Feed gate Handle Assembly, Stainless only 2

6 SPG110 Handle grip, gate arm, rubber with finger grips 1

7 SPG103B 12" Gate Lock Knob, Female thread 1

8 SPG103A 14" Gate lock knob Male 1

9 SGA209 14" Feed gate Salt flap assembly 1

10 Call 12" Feed gate Salt flap assembly 1

14" & 12" SERIES - FEED GATE



SPP100 Replacement hopper, polyethylene, orange, 92" 1

SKS075 Screen Assembly, 7.5', ( O.A. size 45" x 85 1/2" ) 1

SPEV110E 12" conveyor chain, 662, 10.25" center s, 113 links 1

SCA102 14" idler shaft assy (old P/N SPGV130) w/ adjusting bolts. 1

SCA104 14" drive shaft assy (old P/N SPGV115) w/ hardware 1

call Chain shield, bolt in only, left or right, stainless 2

call Gusset cover, bolt in , stainless, 6

call Lifting channel, stainless, w/ u bolt lifting hook 1

call Front hopper spreader bar, stainless, bolt in 1

call Middle hopper spreader bar, stainless, bolt in, 1

HWF646 screen lock pin 4

0.707 Linch Pin .3/8 X 1 3/4 4

call Tie down eyelet, stainless. (specify left or right, front or rear) 4

call Gate assembly & handle, stainless, ( COMPLETE ASSEMBLY ONLY) 1

N/A SCA111 Chain Sweep Assembly, 12" conv., includes mounting hardware. (SS) 1

All chute assembliesAll engine, gearbox & motor platform assemblies

92" POLY HOPPER PARTS

SEE PAGES 16 , 17

SEE PAGES 19 , 20 , 21



1 SPV126D Input shaft seal for gas 20:1 & electric 50:1 gearboxes, 1" I.D., 2 3/8" O.D. 1

2 0.877 Output shaft seal for gas 20:1 & electric 50:1 gearboxes, 1 1/8" I.D., 2" O.D. 1

3 0.874 sensor shaft seal, 6:1 spur gear box, 7/8" I.D., 1 1/2" O.D. 1

4 0.878 Output shaft seal, 6:1 spur gear box, 2" I.D., 2 9/16" O.D. 1

0.143 Bearing, output for Canimex gearbox Bearing with Cup/Cone 1-1/8" ID 1

SPV127 Freeze plug, 2-3/8" 1

GEAR BOX SEALS & BEARINGS

NOTES & REVISIONS

1 2 3 4

To order: Call 207-729-5101 Fax 207-729-8782 email: [email protected]

NOTES & REVISIONS

F:\Spreader manual 2013\Excel worksheets\Parts manual LIST REV C 2013.xlsx

Distributed by:

www.downeastermfg.com

DownEaster Products120 Old Lisbon RD. - Topsham, ME 04086

PH (207) 729-5101 - Fax (207) 729-8782

[email protected]

Coastal Metal Fab was founded in 1979 as a custom metal fabrication shop. Starting in 1993, we began designing and manufacturing sand spreaders, under the DownEaster brand name. Since that time, we have grown steadily and become one of the leading brands in snow and ice control, in the U.S. Our 30,000 sq. ft. facility can accommodate the high output of products required to supply our dealers, all over North America and beyond.

PARTS Edition 2013 - Tri-Power Sales & Service, Inc.tripowersales.com/DownEaster/Downeaster Parts...

Documents

Transcript of PARTS Edition 2013 - Tri-Power Sales & Service, Inc.tripowersales.com/DownEaster/Downeaster Parts...