Part Count: Corvus [OR-K-CV1], 20’ x 20’ Kit Sizeimavex.vo.llnwd.net › ... › files ›...

Corvus [OR-K-CV1], 20’ x 20’ Kit SizePart Count:

Note: MDF fi nishes may vary.*-S*-B*-WD*-DWD

OR-J-3 OR-J-DBL OR-24-2 OR-30-2 OR-36-2 OR-46-2 OR-45-CV-3 OR-90-CV-2

OR-B90 OR-B90A OR-B45 OR-TOOL-B OR-QL-T2J OR-QL-T2T OR-UC-QL OR-STG

OR-LCD1-B OR-LCD2-B OR-LCD3-B

OR-ATL-CNTR

SPOTLIGHT OR-TBL2-L OR-TBL2-R

OR-IS-24

OR-CIS-45 OR-PO1-15 OR-PO1-15-P

OR-IS-36

OR-IS-46

OR-IS-48

OR-CIS-90

OR-SE-IS-90OR-PO5-15 OR-PO5-15-P

OR-PO4-15 OR-PO4-15-P

OR-PO3-15 OR-PO3-15-P

OR-PO2-15 OR-PO2-15-P OR-TC01-15 OR-TC01-P-15

OR-TC02-15 OR-TC02-P-15

OR-TC03-15 OR-TC03-P-15

OR-TC04-18 OR-TC04-P-18

OR-TBL

0

0 0 0

0

0

20 6 0 0 0 0 0 0

0 0 0 0 0 0 0 0

0 0 0 3 107 29 0 0 0 0 0 0

36 0 8 0 20 16 22 12 0 0 0 0

0

0

0

Corvus [OR-K-CV1], 20’ x 20’ Kit SizeGraphic Specs:

IMPORTANT INFORMATION REGARDING GRAPHIC FILES: Each graphic has a specifi c code or number located on the graphic. The electronic print ready fi les provided must be named accordingly. Using this coding system will allow us to prefl ight and prepare your fi les for print more effi ciently. If you fail to provide your graphic fi les in this format, additional charges may be necessary to complete your printed materials.

OR-G-CV5 OR-G-CV5

OR-G-CV3

OR-G-CV4

OR-G-CV1 OR-G-CV2

OR-G-CV7

OR-G-CV8

OR-G-CV9



Acceptable File Formats:Illustrator CS3 or belowPhotoshop CS3 or below

Art time will be charged if fi les need to be fi xed or altered to meet guidelines. When sending fi les please be sure to include all support art (fonts, linked images, etc.)

Font Specifi cations:Fonts must be converted to outlines.

Color:All fi les are printed as CMYK format. All critical Pantone colors need to be called out in the fi le or specifi ed on the order as Coated or Uncoated swatches.

Resolution:All raster fi les (either print fi les or linked fi les) must be at 100-120 pixels per inch at 100%.

Finishing Details:When graphics are notched, a 7/8” square is cut in the appropriate location

FS: Graphics mounted to front ofthe truss systemBS: Graphics mounted to back ofthe truss system

Dye Sublimation graphics are attached to truss with velcro. Inkjet & UV panels are attached to truss with magnet.

Bleeds: All orbital truss graphics require specifi c bleeds. The sizes listed above represent the fi nished graphic size. Please keep all logos, type, and critical information at least 1” in from each edge of the fi nished graphic.

Dye Sublimation: 2” bleed around the perimeter.

Inkjet & UV: 1/2” bleed around the perimeter.

BSBS

BSBS

BS BS

FS

Notched @ top right, bottomleft and bottom right

OR-G-CV3 OR-G-CV4

OR-G-CV5 OR-G-CV6

OR-G-CV7 OR-G-CV8 OR-G-CV9

FS FSOR-G-CV1 OR-G-CV2

83.7

5"[2

127m

m]

90"

[228

6mm

]

37.75"[959m

m]

43"[1092mm]

38.125"[968mm]

39.5"[1003mm]

39.5"[1003mm]

97.75"[2483mm]

74.75"[1899mm]

74.75"[1899mm]

Available Graphics:Dye-Sublimation,

Inkjet or UV Graphics



OR-G-CV14OR-G-CV15

OR-G-CV12

OR-G-CV13

OR-G-CV10OR-G-CV11

OR-G-CV16

OR-G-CV17

OR-G-CV18



Acceptable File Formats:Illustrator CS3 or belowPhotoshop CS3 or below

Art time will be charged if fi les need to be fi xed or altered to meet guidelines. When sending fi les please be sure to include all support art (fonts, linked images, etc.)

Font Specifi cations:Fonts must be converted to outlines.

Color:All fi les are printed as CMYK format. All critical Pantone colors need to be called out in the fi le or specifi ed on the order as Coated or Uncoated swatches.

Resolution:All raster fi les (either print fi les or linked fi les) must be at 100-120 pixels per inch at 100%.

Finishing Details:When graphics are notched, a 7/8” square is cut in the appropriate location

FS: Graphics mounted to front ofthe truss systemBS: Graphics mounted to back ofthe truss system

Dye Sublimation graphics are attached to truss with velcro. Inkjet & UV panels are attached to truss with magnet.

Bleeds: All orbital truss graphics require specifi c bleeds. The sizes listed above represent the fi nished graphic size. Please keep all logos, type, and critical information at least 1” in from each edge of the fi nished graphic.

Dye Sublimation: 2” bleed around the perimeter.

Inkjet & UV: 1/2” bleed around the perimeter.

FSFS

BS BS

BS BS

BSBS

FS

Notched @ top left, bottomleft and bottom right

OR-G-CV10OR-G-CV11OR-G-CV12OR-G-CV13

OR-G-CV14OR-G-CV15

OR-G-CV16OR-G-CV17OR-G-CV18

37.7

5"[9

59m

m]

74.75"[1899mm]

74.75"[1899mm]

97.75"[2483mm]

39.5"[1003mm]

39.5"[1003mm]

90"[2286m

m]

38.125"[968mm]

43"[1092mm]

83.75"[2127m

m]

Available Graphics:Dye-Sublimation,

Inkjet or UV Graphics

Corvus [OR-K-CV1], 20’ x 20’ Kit Size3D Rendering:

Corvus [OR-K-CV1], 20’ x 20’ Kit SizeColor Coded Parts:

Corvus [OR-K-CV1], 20’ x 20’ Kit SizeFloor Plan:

SCALE REF = 5ft

20' d X 20' w Inline

Corvus [OR-K-CV1], 20’ x 20’ Kit SizeCase Count:

ORBITAL FREIGHT CASE 48” x 48” x 18”

(OCF2)

ORBITAL FREIGHT CASE36” x 24” x 10”

(OCHM)

ORBITAL FREIGHT CASE48” x 36” x 10.5”

(OCFM)


(OCF)


(OCT)


(OCH)

FREIGHT CASE48” x 24” x 12”

(OCH-2)

10

0

Notes:

4

0

0

0

Part Count: Corvus [OR-K-CV1], 20’ x 20’ Kit Sizeimavex.vo.llnwd.net › ... › files ›...

Documents

Transcript of Part Count: Corvus [OR-K-CV1], 20’ x 20’ Kit Sizeimavex.vo.llnwd.net › ... › files ›...