Part 7 - Circular Hollow Section

7/27/2019 Part 7 - Circular Hollow Section

1/43


2/43

7 Circular Hollow Section (CHS) SEARCH

COMPANY DETAILS

GLOSSARY

CONTENT

FOREWORD

SUPPLIERS

7 Circular Hollow Section (CHS) PRINT


3/43

1

2 H Section

3 T-Profile

4 Z-Profile

5 Angles

6 Channels7

8

9

10

11

I Beam Section

Circular Hollow Section

A shaded box represents a section that is available

Manufacturers are illustrated in blue and Stockists in green

This directory of stainless steel sections has been published to assist designers and specifiers to locate suppliers of different section types and sizes. It is available

as web documents, where the entire directory and/or separate parts can be downloaded. To access the directory go to www.bssa.org.uk, and enter Sections

Directory and the relevant Part Number in the search engine. NOTE: Downloading of the entire directory may take a few minutes.

FOREWORD

Square Hollow Section

Rectangular Hollow Section

Cold Formed Hollow Sections

Special Sections

Glossary

If the Directory is saved by the user on his/her computer, any subsequent changes or amendments made are not the responsibility of the BSSA.

Microsoft Excel allows searches. Excel spreadsheets showing information about individual section shapes contain two workbooks within them. The workbook

labelled PRINT has the information formatted so that you can print the document, and the workbook labelled SEARCH allows you to search the table. NOTE: use

the drop-down menus in the SEARCH workbook to select for example a dimension or method of manufacture to facilitate searching. After search is complete, click

on drop-down menu(s) used (arrows are shown in blue) and click '(All)' to view all of the data.

The data in the table is organised in ascending order of the major dimension, usually D. Where more than one method of manufacture is shown, these are

grouped by size.

Weights per metre for each section are shown

Dimensions (referred to in tables) are shown on diagrams. Where appropriate, the range of lengths (minimum to maximum) is shown.

The figures in bold have properties listed in SCIs Structural Design of Stainless Steel. Copies are available from BSSA.

Tel: 0114 267 1260

Fax: 0114 266 1252

British Stainless Steel Association

Website: www.bssa.org.uk 3


4/43

Stainless steel sections for structural applications

Web Based Design Software (www.steel-stainless.org - on-line registration required to use their service)

FOREWORD

The following additional resources are also available from the British Stainless Steel Association to assist in the design and procurement of stainless steel sections:

British Stainless Steel Association (BSSA)

Steel Construction Institute (SCI)

Tables of Technical Properties of Stainless Steels (flat products) - www.euro-inox.org/technical_tables/

Available in hard copy, on CD-ROM and website - www.euro-inox.org

Technical Articles (www.bssa.org.uk)

Structural design of stainless steel

Copyright 2006 British Stainless Steel Association

Structural Design Guide of Stainless SteelAvailable in hard copy - publication number: SCI P291

Euro Inox

Design Manual for Structural Stainless Steel - Third Edition, Building Series, Volume 11

Although care has been taken to ensure, to the best of our knowledge, that all data and information contained herein are accurate to the extent that they relate to

either matters of fact, or accepted practice or matters of opinion at the time of publication, the British Stainless Steel Association, its members, staff and consultants

assume no responsibility for any errors in or misinterpretation of such data and/or information or any loss or damage arising from or related to their use.

Tel: 0114 267 1260

Fax: 0114 266 1252




5/43

Supplier Matrix

Section

1

I Beam

Section

2

H Section

3

T-Profile

4

Z-Profile

5

Angles

6

Channels

7

Circular

Hollow

Section

8

Square

Hollow

Section

9

Rectangular

Hollow Section

10

Cold Formed

Hollow

Sections

11

Special

Sections

Supplier

Aalco Metals Ltd P P P PAncon Building Products P P P P P P P P PBarnshaws Steel Bending P P PDaversteels Ltd P P P PINTAMET Ltd P P P P P P P PKlockner RP Profiles P PMetsec Plc PMillstock Stainless P P P P P P P P P PRalph J Batchelor P P P P P PStalatube P PStewart Fraser Ltd P

Section is available

The figures in bold have properties listed in SCI's Structural Design Gu ide of Stainless Steel. Copies are available from the BSSA.

SUPPLIERS

Stockists are shown in greenManufacturers are shown in blue

Weight per metre for each section are shown

Tel: 0114 267 1260

Fax: 0114 266 1252




6/43

Company Name Aalco Metals Ltd Ancon Building Products Barnshaws Steel Building Daversteels Ltd

Address 1 President Way Barnshaw Group 395 Petre Street

Address 2 President Park Tipton Road, Tividale Sheffield

Address 3 Sheffield, South Yorkshire Oldbury, West Midlands South Yorkshire

Postcode S4 7UR B69 3HY S4 8LN

Tel No. 01932 250100 0114 275 5224 0121 557 8261 0114 2611999

Fax No. 01932 250101 0114 276 8543 0121 557 5323 0114 2611888

E-mail [email protected] [email protected] [email protected] [email protected]

Website www.aalco.co.uk www.ancon.co.uk www.barnshaws.com www.daversteels.com

Company Name INTAMET Ltd Klockner RP Profiles Metsec Plc Millstock Stainless Ltd

Address 1 Unit 11, The IO Centre, Stephenson Road 901 Herries Road Birmingham Road Alloys House

Address 2 Segensworth, South Fareham Sheffield Oldbury Dale Street

Address 3 Hampshire South Yorkshire West Midlands Bilston, West Midlands

Postcode PO15 5RU S6 1QH B69 4HE WV14 7JY

Tel No. 01329 843355 0114 234 5288 0121 601 6110 0190 240 9409

Fax No. 01329 847799 0114 234 1643 0121 601 6136 0190 240 9411E-mail [email protected] [email protected] [email protected] [email protected]

Website www.intamet.co.uk www.steelglazing.co.uk www.metsec.com www.millstockstainless.com

Company Name Ralph J Batchelor Ltd Stalatube Oy AGENTS (Sperryn & Co) Stewart Fraser Ltd

Address 1 Millbrook Way The Cottage Henwood Industrial Estate

Address 2 Orleton, Ludlow Claypit Lane, Aldershawe Ashford

Address 3 Shropshire Lichfield, Staffordshire KentPostcode SY8 4HN WS14 0AQ TN24 8DR

Tel No. 01568 780616 01543 263100 01233 625911

Fax No. 01568 780791 01543 263150 01233 633149

E-mail [email protected] [email protected] [email protected]

Website www.ralphbatchelor.co.uk www.stalatube.com www.stewartfraser.com

COMPANY DETAILS

18 branches across the UK see website for

details.
mailto:[email protected]:[email protected]:[email protected]:[email protected]://www.aalco.co.uk/http://www.ancon.co.uk/mailto:[email protected]:[email protected]:[email protected]:[email protected]://www.intamet.co.uk/http://www.steelglazing.co.uk/http://www.metsec.com/http://www.millstockstainless.com/mailto:[email protected]:[email protected]:[email protected]://www.ralphbatchelor.co.uk/http://www.stalatube.com/http://www.stewartfraser.com/http://www.stewartfraser.com/http://www.stalatube.com/http://www.ralphbatchelor.co.uk/mailto:[email protected]:[email protected]:[email protected]://www.millstockstainless.com/http://www.metsec.com/http://www.steelglazing.co.uk/http://www.intamet.co.uk/mailto:[email protected]:[email protected]:[email protected]:[email protected]://www.ancon.co.uk/http://www.aalco.co.uk/mailto:[email protected]:[email protected]:[email protected]:[email protected]


7/43


8/43


9/43

1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)

18.00 1.50 0.62 Ancon, INTAMET Welded


19.05 1.20 0.53 Aalco, Ancon Welded








21.30 1.60 0.79 Ancon, INTAMET Welded21.30 2.00 0.97 Ancon, INTAMET Welded





D

mm

t

mm

M

kg/mProduct Supplier Method of Manufacture

1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)





Grade

A service provided by the


t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




10/43











25.00 1.50 0.89 Aalco Welded


25.00 2.00 1.16 Aalco Welded25.00 2.00 1.16 Ancon, INTAMET Welded


25.00 3.00 1.66 Aalco, Ancon, INTAMET Welded



D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)

25.40 2.00 1.17 Aalco, Ancon Welded26.67 1.65 1.03 Ancon, INTAMET Welded



Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




11/43


26.90 1.50 0.96 Ancon Welded











30.00 1.00 0.68 Ancon, INTAMET Welded30.00 1.20 0.86 Aalco, Ancon Welded


D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)




31.75 1.20 0.92 Aalco, Ancon Welded31.75 1.50 1.13 Aalco, Ancon Welded



Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




12/43

32.00 1.25 0.97 Ancon Welded


32.00 2.00 1.51 Ancon Welded

32.00 2.00 1.51 INTAMET Welded










D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)









Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




13/43








38.00 2.00 1.81 Aalco Welded



D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)38.00 3.00 2.64 Aalco, Ancon, INTAMET Welded









40.00 3.00 2.79 Aalco, Ancon, INTAMET Welded40.00 4.00 3.61 Ancon, INTAMET Welded


Grade

rcu ar o ow ect on



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




14/43





42.20 1.25 1.29 Ancon Welded

42.20 1.50 1.54 Ancon Welded

42.20 2.00 2.03 Ancon Welded

42.20 2.50 2.51 Ancon Welded

D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)

42.20 2.60 2.99 Ancon Welded

42.20 3.00 2.97 Ancon Welded42.20 3.20 3.15 Ancon Welded












Grade


t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




15/43









D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)














rcu ar o ow ect on

Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




16/43




D t M Product Supplier Method of Manufacture

1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)




















Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




17/43




1.4301 1.4307 1.4401 1.4404 1.4571



60.30 1.50 2.21 Ancon Welded


















Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




18/43


1.4301 1.4307 1.4401 1.4404 1.4571



65.00 1.50 2.39 Ancon Welded

65.00 2.00 3.17 Ancon Welded68.00 1.50 2.50 Ancon, INTAMET Welded









73.03 5.16 8.77Ancon, INTAMET

Welded

76.10 1.50 2.81 Ancon Welded







Grade




t

D

t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




19/43


1.4301 1.4307 1.4401 1.4404 1.4571












85.00 1.50 3.15 Ancon Welded





D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)

Grade


Grade





t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




20/43

















D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)

108.00 3.00 7.92 Ancon Welded





Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




21/43



114.30 2.50 7.02 Ancon Welded











D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)








Grade




t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




22/43









D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)












rcu ar o ow ect on

Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




23/43



323.90 3.00 24.10 Ancon, INTAMET, Millstock Stainles Welded323.90 4.00 32.04 Ancon, INTAMET, Millstock Stainles Welded

323.90 4.57 36.54 Ancon, INTAMET, Millstock Stainles Welded

323.90 5.00 36.54 Ancon, Barnshaws, Millstock Stainl Welded



D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)


323.90 10.00 75.01 Ancon, Barnshaws, Millstock Stainl Welded323.90 12.00 75.01 Ancon, Barnshaws, Millstock Stainl Welded












Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




24/43








D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)


508.00 9.53 118.95 Ancon, INTAMET, Millstock Stainles Welded508.00 10.00 118.95 Ancon, Barnshaws, Millstock Stainl Welded










559.00 25.00 118.95 Ancon, Barnshaws, Millstock Stainl Welded609.60 6.35 95.92 Ancon, INTAMET, Millstock Stainles Welded


Grade



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




25/43








D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)













Grade




t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




26/43




838.00 8.00 143.20 Ancon, Barnshaws, Millstock Welded




D

mm

t

mm

M


1.4301

(304)

1.4307

(304L)

1.4401

(316)

1.4404

(316L)

1.4571

(316Ti)












Grade

tD tD



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




27/43

D

mm

t

mm

M


1.4301(304)

1.4307(304L)

1.4401(316)

1.4404(316L)

1.4571(316Ti)

















15.00 1.50 0.51 Aalco Welded



Grade

7 Circular Hollow Section



t

D

Tel: 0114 267 1260

Fax: 0114 266 1252




28/43






17.20 1.50 0.59 Ancon Welded





























Tel: 0114 267 1260

Fax: 0114 266 1252




29/43





25.00 1.50 0.89 Aalco Welded


25.00 2.00 1.16 Aalco Welded










26.90 1.50 0.96 Ancon Welded


















Tel: 0114 267 1260

Fax: 0114 266 1252




30/43


32.00 1.25 0.97 Ancon Welded

32.00 1.50 1.15 Ancon, INTAMET Welded32.00 2.00 1.51 Ancon Welded

32.00 2.00 1.51 INTAMET Welded
























38.00 2.00 1.81 Aalco Welded







Tel: 0114 267 1260

Fax: 0114 266 1252




31/43












42.20 1.25 1.29 Ancon Welded

42.20 1.50 1.54 Ancon Welded

42.20 2.00 2.03 Ancon Welded

42.20 2.50 2.51 Ancon Welded

42.20 2.60 2.99 Ancon Welded

42.20 3.00 2.97 Ancon Welded

42.20 3.20 3.15 Ancon Welded

















Tel: 0114 267 1260

Fax: 0114 266 1252




32/43



48.30 1.50 1.76 Aalco, Ancon, INTAMET Welded48.30 1.60 1.87 Ancon, INTAMET Welded































Tel: 0114 267 1260

Fax: 0114 266 1252




33/43






60.30 1.50 2.21 Ancon Welded


















65.00 1.50 2.39 Ancon Welded

65.00 2.00 3.17 Ancon Welded









Tel: 0114 267 1260

Fax: 0114 266 1252




34/43


76.10 1.50 2.81 Ancon Welded











76.20 2.00 5.52 Aalco, Ancon Welded80.00 1.50 2.95 Ancon, INTAMET Welded





85.00 1.50 3.15 Ancon Welded















Tel: 0114 267 1260

Fax: 0114 266 1252




35/43





108.00 3.00 7.92 Ancon Welded






114.30 2.50 7.02 Ancon Welded






















Tel: 0114 267 1260

Fax: 0114 266 1252




36/43

















323.90 3.00 24.10 Ancon, INTAMET, Millstock

Stainless Welded


Stainless Welded


Stainless Welded323.90 5.00 36.54 Ancon, Barnshaws, Millstock

Stainless Welded

323.90 6.00 36.54 Ancon, Barnshaws, Millstock

Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded

323.90 12.00 75.01 Ancon, Barnshaws, MillstockStainless Welded

Tel: 0114 267 1260

Fax: 0114 266 1252




37/43


Stainless Welded

355.60 4.78 41.99 Ancon, INTAMET, MillstockStainless Welded


Stainless Welded


Stainless Welded

406.40 6.00 48.07 Ancon, Barnshaws Welded

406.40 8.00 48.07 Ancon, Barnshaws Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Tel: 0114 267 1260

Fax: 0114 266 1252




38/43


Stainless Welded

508.00 9.53 118.95 Ancon, INTAMET, MillstockStainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Tel: 0114 267 1260

Fax: 0114 266 1252




39/43


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Tel: 0114 267 1260

Fax: 0114 266 1252




40/43


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded



Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Stainless Welded


Tel: 0114 267 1260

Fax: 0114 266 1252




41/43


Stainless Welded


42/43

[1] These sections may also be obtained by hot extrusion. In its statistics, EUROSTAT considers hot extruded products to be hot rolled.

6.7.5.3T Sections (with equal flanges)

6.7.5.5Special Sections [1]

The cross section shape resembles the letter T. The corners are rounded and the flanges and web are slightly tapered, the flanges are of equal width.

These include products hot rolled in length usually of small open cross section or of very special shape which are generally rolled in limited quantities and are not

covered by 6.7.4 or6.7.5.1 to 6.7.5.4. This class includes in particular Z Sections, T Sections with unequal flanges, square edged L, U and T Sections, caterpillar

track sections etc.

The cross section shape resemble the letters U, I or H and the web height is up to 80mm.

The cross section shape resembles the letter L. Definition as equal or unequal angles depends on the ratio of the flange widths. The corners of the flanges arerounded.

6.7.5 Other Sections

6.7.5.2Angles

Sections having a cross section shape resembling a letter H where the flanges are wider than 0.66 of the nominal height or 300mm or over. Sections with flanges

wider than 0.8 of the nominal height are sometimes called columns.

6.7.4.3U Sections (channels)

Sections having a cross section resembling the letter U. In the standardised series the flanges have sloping internal faces and a maximum width of (h/2 + 25).

6.7.4.1I Sections (narrow and medium flanges)

GLOSSARY [Clauses from BS EN 10079: 1993 Definition of stainless steel products, BSI 1993]

Hot rolled products with cross sections resembling the letters I, H, U with a web height of 80mm or over.

6.7 Hot Rolled Sections

6.7.4 Heavy Sections

6.7.5.2Small U, I and H Sections

Sections having a cross section shape resembling the letter I where the flanges are not wider than 0.66 of the nominal height of the section and up to 300mm.

6.7.4.2H Sections (wide flanged beams)

Tel: 0114 267 1260

Fax: 0114 266 1252




43/43

a) general purpose cold formed sections, for example, L, U, C, Z, Omega Sectionsb) products for particular applications including cold formed sheet piling, crash barriers, building frames, lorry and wagon chassis

6.9 Cold Formed Sections

GLOSSARY [Clauses from BS EN 10079: 1993 Definition of stainless steel products, BSI 1993]

Welded sections are long products of open cross section which have cross section shapes similar to the products defined in 6.7.4 and 6.7.5, but instead of being

obtained directly by hot rolling are made up by welding together combinations of hot rolled long products, hot rolled flat products or cold rolled flat products.

6.8 Welded Sections

Seamless or welded tubes of circular, square or rectangular cross-section used in construction, for example, of structural steelwork, cranes, vehicle chassis, etc.

Cold formed long products having various cross section shapes, either open or with edges abutting, constant along their length. They are made from coated or

uncoated hot or cold rolled flat products whose thicknesses are only slightly modified by the cold forming process (for example, profiling, drawing, press forming,

flanging etc).

They comprise:

6.10 Tubular Products

6.10.4 Hollow Sections

Tel: 0114 267 1260

Fax: 0114 266 1252



Part 7 - Circular Hollow Section

Documents

Transcript of Part 7 - Circular Hollow Section