Part 3 upper_edentulous_special_tray

9
Part 3 Upper Edentulous Special Tray Procedure for applying a wax spacer +45

Transcript of Part 3 upper_edentulous_special_tray

Page 1: Part 3 upper_edentulous_special_tray

Part 3 Upper Edentulous Special Tray

Procedure for applying a wax spacer

+45

Page 2: Part 3 upper_edentulous_special_tray

With a sharp pencil, draw a line at the full depth of the sulcus

Sulcus

Then carefully draw another line 3mm above

the other all the way around

Page 3: Part 3 upper_edentulous_special_tray

3mm

Page 4: Part 3 upper_edentulous_special_tray

Soften a single sheet of wax in the bunsen flame and adapt it firmly over the palate and into the full

depth of the sulcus

Page 5: Part 3 upper_edentulous_special_tray

Check with your lecturer before you apply a second sheet.

Seal the wax with a hot knife into the depth of the sulcus

Page 6: Part 3 upper_edentulous_special_tray

Adapt firmlyinto here!

Page 7: Part 3 upper_edentulous_special_tray

Part 4

Applying the special tray material

Page 8: Part 3 upper_edentulous_special_tray

3mm

Page 9: Part 3 upper_edentulous_special_tray