PARQCOLOR - Flooring HPL Catalog
-
Upload
renato-vigano -
Category
Presentations & Public Speaking
-
view
551 -
download
6
description
Transcript of PARQCOLOR - Flooring HPL Catalog
Parqcolor®
Parqcolor ® is a floating floor that is cutting-edge in terms of both technology and aesthetics. The characteristic that makes Parqcolor ® an outstanding product on the laminate market is the High Pressure process - High Pressure Laminate. The surface of the laminated flooring is made up by laying cellulose sheets impregnated with phenol resins and a decorative sheet impregnated with melamine resins on top of one another. Next the panel is subjected to very high temperatures and pressures by means of flat presses (not rollers).This procedure results in polycondensation of the resins that make the Print HPL laminate a product with exceptional: hardness, non porosity, anti-staticity, scratch resistance, wear resistance, impact resistance, resistance to acts of vandalism, and fire resistance.
Parqcolor®
Parqcolor® to gama zaawansowanych technicznie i wyrafinowanych wzorniczo laminowanych podłóg pływających. Cechą wyróżniającą Parqcolor® na tle innych producentów podłóg laminowanych jest zastosowanie w warstwie dekoracyjnej laminatów wysokociśnieniowych HPL. Powierzchnia podłogi laminowanej składa się z warstw papieru impregnowanych żywicą fenolową i wierzchniej warstwy papieru dekoracyjnego impregnowanego żywicą melaminową.Tak skomponowany arkusz poddawany jest działaniu wysokiej temperatury i ciśnieniu w prasach półkowych. Proces ten powoduje polikondensację żywic, która sprawia, że laminat Print HPL jest produktem o wyjątkowej trwałości, nieporowatym, antyelektrostatycznym, odpornym na zarysowania, ścieranie, uderzenia i akty wandalizmu oraz ognioodpornym.
9761 SAW CUT2
Index
High pressure laminate, consisting of: • Overlay: high resistant protective layer • Decorative surface• Kraft Paper • Sanded layer
High pressure balancer, consisting of: • Sanded layer • Kraft Paper • Brown layer
HDF high density fiberboard wood panel
Parqcolor ® HPL’ s characteristics:• Made in Italy: guaranteed and UNI EN ISO 9001:2008 certified - cert. n° 69. • Marking: obtained by means of an annual certification system issued by an external body authorised by the Interior Ministry. • Guarantee: 25 years for residential installations - 6 years for commercial installations.• Customisation: customisable decoration digitally printed. • High Thickness: flooring 8 mm - 11 mm thickness, with the wear surface in 0,7 mm thickness HPL laminate. • Limited Number of Joints: the thickness and stability of the planks make it possible to lay up to 300 sqm without expansion joints. • Stability: The Plank and Big Tiles are balanced with Print HPL laminate and so guarantee greater stability and flatness. • Maintenance-Free: no maintenance or waxing needed.• Light Resistance: total absence of photosensitivity. • Inalterability: total resistance to the transfer of pigments and plasticisers. • Fire Resistance: Euroclass Bfl-S1 fire reaction, when the source is eliminated flames are not propagated. Resistant to cigarette burns.
• Installation: floating flooring that can also be laid on fitted carpet bases and on floor slabs with radiant panel heating. • Permanently Antistatic: absence of the build up of static electricity. • Stain Resistance: closed pore flooring that is resistant to chemical agents, ink, paint, and any type of stain that can be removed using solvents. • Aseptic: immune to attack by micro organisms, maximum hygiene.• Formaldehyde Emission: the HPL quality guarantees values 10 times lower than the current norms. • Slip Resistance: complies with the new European EN 13893:2002 standard, dynamic friction coefficient, Class DS.• Eco-Compatible and Recyclable: all the raw materials used in manufacturing Parqcolor® flooring are sourced from Sustainably Managed Forests - FSC Standard (Forest Stewardship Council).• HDF - High Density Fibreboard: constitutes the support for the Plank, Long Plank and the Big Tiles, a panel made up of wood fibres bonded using a special resin with good mechanical properties, excellent dimensional stability, and compactness along the edges (density above 850 kg/m3).
index
04 Parqcolor® Print HPL
08 Parqcolor® Vintage collection
12 Parqcolor® Carpineta collection
16 Parqcolor® Materica collection
20 Parqcolor® Brera collection
24 Standard Productions
32 Parqcolor® Gold collection
40 Parqcolor® Stair treads
46 Parqcolor® Skirting boards
48 Parqcolor® Accessories
52 Technical and Commercial Data
64 How to Install
70 Parqcolor® Raised Floor
77 Contacts
4 5
Charakterystyka podłóg Parqcolor® HPL:• Produkcja we Włoszech spełniają wymagania normy UNI EN ISO 9001:2008, certyfikat nr 69. • Oznakowanie : uzyskane w drodze procesu certyfikacji prowadzonego przez niezależne laboratorium pod nazorem Ministerstwa Spraw Wewnętrznych Włoch.• Gwarancja: 25 lat w przestrzeniach mieszkalnych – 6 lat w przestrzeniach publicznych.• Personalizacja: możliwość produkcji w indywidualnie zaprojektowanym wzorze w technologii druku cyfrowego.• Duża grubość: całkowita grubość panelu to 8 mm - 11 mm, a powierzchnia dekoracyjna podlegająca obciążeniom użytkowym to aż 0,7 mm laminatu HPL.• Ograniczona liczba łączeń dylatacyjnych: duża grubość i związana z nią stabilność wymiarowa paneli pozwala na położenie do 300 m2 podłogi bez dylatacji.• Stabilność: we wszystkich formatach paneli warstwę dekoracyjną i przeciwprężną stanowi laminat HPL, co gwarantuje jej większą stabilność wymiarową i płaskość.• Nie wymaga konserwacji powierzchni: brak konieczności pastowania czy woskowania.• Odporność na działanie światła: całkowita odporność na płowienie.• Niezmienność wyglądu: nie wchłania barwników i plastyfikatorów.• Odporność ogniowa: zgodnie z Euroklasą Bfl-S1, podłoga nie rozprzestrzenia ognia. Jej powierzchnia jest odporna na żar papierosa.
• Montaż: podłogi można instalować również na istniejących wykładzinach dywanowych oraz wylewkach kryjących instalacje ogrzewania podłogowego.• Antyelektrostatyczność: nie gromadzi na powierchni ładunków elektrostatycznych.• Odporność na zaplamienia: zamknięta struktura komórkowa powierzchni jest odporna na chemikalia, atrament, farby i lakiery, a zabrudzenia i zaplamienia można usuwać przy pomocy rozpuszczalników.• Aseptyczność: powierzchnia podłogi jest odporna na działanie mikrogranizmów, nie sprzyja również ich namnażaniu się, gwarantując zachowanie maksimum higieny.• Emisja formaldehydu: jakość użytego laminatu HPL gwarantuje poziom emisji formaldehydu 10 razy mniejszy od dopuszczalnego. • Antypoślizgowość: zgodnie z nową normę europejską EN 13893:2002 współczynnik tarcia dynamicznego - klasa DS.• Ekologiczność i możliwość recyklingu: wszystkie surowce stosowane w produkcji podłóg pływających Parqcolor®
pochodzą ze źródeł posiadających certyfikat FSC (Forest Stewardship Council).• HDF - High Density Fiberboard: płyta rdzeniowa podłogi o gęstości powyżej 850kg/m3, produkowana jest z włókien drzewnych wiązanych specjalną żywicą, gwarantuje znakomitą stabilność wymiarową oraz zwartość wzdłuż krawędzi panelu.
Laminat wysokociśnieniowy, składający się z:• Overlayu: warstwy ochronnej o wysokiej odporności• Warstwy dekoracyjnej• Papieru Krafta• Spodniej warstwy szlifowanej
Warstwa przeciwprężna, składająca się z:• Spodniej warstwy szlifowanej• Papieru Krafta• Warstwy brązowego papieru
HDF płyta rdzeniowa o podwyższonej gęstości
spis treści
spis treści
06 Parqcolor® Print HPL
08 Kolekcja Parqcolor® Vintage
12 Kolekcja Parqcolor® Carpineta
16 Kolekcja Parqcolor® Materica
20 Kolekcja Parqcolor® Brera
24 Produkcja standardowa
32 Kolekcja Parqcolor® Gold
40 Parqcolor® Stopnice Schodowe
46 Listwy i cokoły przypodłogowe Parqcolor®
48 Akcesoria Parqcolor®
52 Dane techniczne i handlowe
64 Instrukcja montażu
70 Podłoga podniesiona Parqcolor®
77 Dane kontaktowe
6 7
Parqcolor®
vintage
Vintage9345 CADORE OLD PINE8 9
PARQCOLOR® VINTAGE COLLECTIONN° 35 Wood PatternsFinishes: Structure, Holz Plank sizes 18,8x120 cm – Big Plank sizes 18,8x180 cm - Thickness 11 mmClick joint – L2C Surface in Print HPL laminate - Thickness 0,7 mmAC5 Abrasion Resistance Class 23-33 Level of use: heavy (intense traffic area)IC4 Impact Resistance
Parqcolor® in 8 mm thickness only on demand - minimum production batch 100 mq.Click joint - L2C.A new version of the attractiveness of retro flooring in light and dark colours and a natural texture, rough to the touch, like the trunks of ancient trees. The Vintage collection is designed to create a warm, inviting atmosphere and for furnishing spaces in a refined, sought-after style. Floor customised by digital printing: the digital floor offers the opportunity of customising your floor. Thanks to innovative technology, it is possible to create a decoration from a digital image. A personalised logo, photo, texture, or type of wood can become the central feature of your floor.
KOLEKCJA PARQCOLOR® VINTAGE 35 propozycji wzorów drewna Struktura powierzchni: Struttura, Holz Format: panele 18,8x120 cm – deski długie 18,8x180 cm - Grubość 11 mmSposób łączenia: system Click - L2CWarstwa wierzchnia z laminatu Print HPL - grubość 0,7 mmKlasa odporności na ścieranie AC5Klasa użytkowa 23 - 33: podwyższona (intensywny ruch pieszy)Klasa odporności na uderzenia IC4
Panele Parqcolor® o grubości 8 mm są dostępne tylko na zamówienie; minimalna partia produkcyjna wynosi 100 m2. Sposób łączenia: system Click – L2C.Nowa wersja atrakcyjnych podłóg w stylu retro, w kolorach jasnych i ciemnych z naturalną strukturą powierzchni, szorstką w dotyku, przypominającą pnie starych drzew. Kolekcja Vintage opracowana została w celu nadania wnętrzom ciepłej, przytulnej atmosfery, a jednocześnie wyrafinowanego stylu.Dzięki technologii druku cyfrowego możliwe jest tworzenie indywidualnych wzorów na życzenie klienta. Innowacyjna technologia umożliwia przetwarzanie obrazów cyfrowych we wzory dekoracyjne. W ten sposób osobiste logo, zdjęcie, faktura powierzchni lub wybrany rodzaj drewna mogą stać się głównym motywem dekoracyjnym własnej podłogi.
Vintage
Parqcolor® vintage
10 11
Carpineta
Parqcolor® carpineta
9762 OREGON WHITE OAK12 13
PARQCOLOR® CARPINETA COLLECTIONN° 24 Wood PatternsFinishes: Nutshell, Microline, Structure, Longline, HolzPlank sizes 18,8x120 cm - Thickness 11 mm Click joint – L2C Surface in Print HPL laminate - Thickness 0,7 mmAC5 Abrasion ResistanceClass 23-33 Level of use: heavy (intense traffic area)IC4 Impact Resistance
Parqcolor® in 8 mm thickness only on demand - minimum production batch 100 sqm.Click joint – L2C. The Ottawa Maple, Shanghai and Maple are woods that are able to create a glamorous floor with a distinctive character. For this reason the Carpineta collection uses materials that recall the world of nature. A balance of nuances and textures, with colour contrasts, produce a great visual effect, guaranteeing striking beauty. Suitable for any project and colour need. Floor customised by digital printing: the digital floor offers the opportunity of customising your floor. Thanks to innovative technology, it is possible to create a decoration from a digital image. A personalised logo, photo, texture, or type of wood can become the central feature of your floor.
KOLEKCJA PARQCOLOR® CARPINETA 24 propozycji wzorów drewna Struktura powierzchni: Nutshell, Microline, Struttura, Longline, HolzFormat: panel 18,8x120 cm - Grubość 11 mmSposób łączenia: system Click – L2CWarstwa wierzchnia z laminatu Print HPL - grubość 0,7 mmKlasa odporności na ścieranie AC5Klasa użytkowa 23 - 33: podwyższona (intensywny ruch pieszy)Klasa odporności na uderzenia IC4
Panele Parqcolor® o grubości 8 mm są dostępne tylko na zamówienie; minimalna partia produkcyjna wynosi 100 m2. Sposób łączenia: system Click – L2C.Deski o wzorach drewna Ottawa, Shanghai i Maple pozwolą stworzyć efektowną,wyróżniającą się stylem podłogę. Z tej przyczyny kolekcja Carpineta wykorzystuje materiały, które przywołują świat natury. Równowaga niuansów i faktur z kontrastami kolorów daje wspaniały efekt wizualny, zapewniając niepowtarzalne wrażenie. Spełni każde wymagania każde wymagania projektowe i kolorystyczne.Dzięki technologii druku cyfrowego możliwe jest tworzenie indywidualnych wzorów na życzenie klienta. Innowacyjna technologia umożliwia przetwarzanie obrazów cyfrowych we wzory dekoracyjne. W ten sposób osobiste logo, zdjęcie, faktura powierzchni lub wybrany rodzaj drewna mogą stać się głównym motywem dekoracyjnym własnej podłogi.
Parqcolor® carpineta
Carpineta14 15
Parqcolor® materica
materica16 17
PARQCOLOR®
MATERICA COLLECTIONN° 11 Patterns: Stone, Concrete, Marble, Textile, Iron Finishes: 66, Climb, Grana, MicrolinePlank sizes 18,8x120 cm - Thickness 11 mmClick joint – L2CDim. Big Tiles 59x59 cm – 39x79* cm – 59x120* cm - Thickness 11 mmGlue jointPrint HPL Laminate - Thickness 0,7 mmAC5 Abrasion ResistanceClass 23-33 Level of use: heavy (intense traffic area)IC4 Impact Resistance
Parqcolor® Materica in Plank size and 8 mm thickness is only available on demand, with minimum production batch of 100 sqm. Lithic materials have always been man’s faithful companions. A skin with innumerable variations creates multiform, eclectic spaces - Concrete, Tivoli, Calcis, Volcano, and Mongolia - with trendy colours and finishes can create minimal spaces in contemporary style. The Materica line does not overlook multiple possibilities of original combinations.Floor customised by digital printing: the digital floor offers the opportunity of customising your floor. Thanks to innovative technology, it is possible to create a decoration from a digital image. A personalised logo, photo, texture, or type of wood can become the central feature of your floor. *Available on demand
KOLEKCJAPARQCOLOR® MATERICA 11 propozycji wzorniczych: Pietra, Cemento, Ferro, Tessuto, Marmo Struktura powierzchni: 66, Climb, Grana, MicrolineFormat: panel 18,8x120 cm - Grubość 11 mmSposób łączenia: system Click – L2CFormat: Duże płyty 59x59 cm – 39x79*cm – 59x120*cm - grubość 11 mmSposób łączenia: na klejWarstwa wierzchnia z laminatu Print HPL - grubość 0,7 mmKlasa odporności na ścieranie AC5Klasa użytkowa 23 - 33: podwyższona (intensywny ruch pieszy)Klasa odporności na uderzenia IC4
Panele Parqcolor® Materica o grubości 8 mm są dostępne tylko na zamówienie; minimalna partia produkcyjna wynosi 100 m2. Kamień od zawsze był wiernym towarzyszem człowieka. Powierzchnia w swoich niezliczonych odmianach stwarza wielopostaciowe, eklektyczne przestrzenie - Concrete, Tivoli, Calcis, Volcano i Mongolia – w połączeniu z modnymi kolorami i fakturami innych materiałów pozwalają tworzyć minimalistyczne przestrzenie we współczesnym stylu. Kolekcja Materica umożliwia tworzenie wielu oryginalnych kombinacji. Dzięki technologii druku cyfrowego możliwe jest tworzenie indywidualnych wzorów na życzenie klienta. Innowacyjna technologia umożliwia przetwarzanie obrazów cyfrowych we wzory dekoracyjne. W ten sposób osobiste logo, zdjęcie, faktura powierzchni lub wybrany rodzaj drewna mogą stać się głównym motywem dekoracyjnym własnej podłogi. *Produkcja na zamówienie
Parqcolor® materica
materica18 19
Parqcolor® brera
Brera410 WHITE ICE20 21
PARQCOLOR® BRERA COLLECTION N° 18 Solid ColoursFinishes: Glossy, 66 , Climb , LeatherPlank sizes 18,8x120 cm - Thickness 11 mmClick joint – L2C Dim. Big Tiles 59x59 cm – 39x79* cm – 59x120* cm - Thickness 11 mmGlue jointPrint HPL Laminate Surface - Thickness 0,7 mmAC5 Abrasion ResistanceClass 23-33 Level of use: heavy (intense traffic area) IC4 Impact Resistance
The Glossy Finish is not included in the characteristics listed above as regards abrasion resistance. Parqcolor® Brera in Plank size and 8 mm thickness is only available on demand, with minimum production batch of 100 sqm.This flooring is suitable for minimalist spaces with a contemporary, metropolitan character. Polished and rough finishes, always pleasant to the touch. Multiple chromatic possibilities: matt, glossy, rough. Starting from a white or grey colour through to blue, dove-grey, red, and ending with black, this brings elegance to any space.
Floor customised by digital printing: the digital floor offers the opportunity of customising your floor. Thanks to innovative technology, it is possible to create a decoration from a digital image. A personalised logo, photo, texture, or type of wood can become the central feature of your floor.
KOLEKCJA PARQCOLOR® BRERA 18 jednolitych kolorów Struktura powierzchni: Lucida, 66, Climb, LeatherFormat: panel 18,8x120 cm - Grubość 11 mm Sposób łączenia: system Click – L2CFormat: Duże płyty 59x59 cm – 39x79*cm – 59x120*cm - grubość 11 mmSposób łączenia: na klejWarstwa wierzchnia z laminatu Print HPL - grubość 0,7 mmKlasa odporności na ścieranie AC5Klasa użytkowa 23 - 33: podwyższona (intensywny ruch pieszy)Klasa odporności na uderzenia IC4
Panele w strukturze Lucida (połysk) nie odpowiadają w/w specyfikacji w zakresie odporności na ścieranie. Panele Parqcolor® Brera o grubości 8 mm są dostępne tylko na zamówienie; minimalna partia produkcyjna wynosi 100 m2. Podłogi te są odpowiednie dla minimalistycznych przestrzeni o współczesnym, wielkomiejskim charakterze. Gładkie i szorstkie wykończenia, zawsze przyjemne w dotyku. Wielobarwne możliwości w różnych strukturach powierzchni: mat, połysk, szorstki. Począwszy od białego lub szarego koloru, poprzez niebieski, popielato-szary, czerwony i kończąc na czarnym – nadadzą każdemu pomieszczeniu elegancki wygląd. Dzięki technologii druku cyfrowego możliwe jest tworzenie indywidualnych wzorów na życzenie klienta.Innowacyjna technologia umożliwia przetwarzanie obrazów cyfrowych we wzory dekoracyjne. W ten sposób osobiste logo, zdjęcie, faktura powierzchni lub wybrany rodzaj drewna mogą stać się głównym motywem dekoracyjnym własnej podłogi.*Produkcja na zamówienie
Parqcolor® Brera
Brera22 23
Parqcolor® standard productions Produkcja standardowa
9249 PINK CHERRY24 25
1355 OAK
Fin. Structure1355OAK
Fin. Struttura
619 GREY MAPLEFin. Structure
619GREY MAPLEFin. Struttura
640 LARCH
Fin. Structure640
LARICEFin. Struttura
9257 BEECH FLOORFin. Structure
9257FAGGIO FLOOR
Fin. Struttura
9231 PINK BIRCH
Fin. Structure 9231
BETULLA ROSATAFin. Struttura
9249 PINK CHERRYFin. Structure
9249CILIEGIO ROSATO
Fin. Struttura
633 LIMBA GOLDFin. Structure
633LIMBA GOLDFin. Struttura
9206 DARK OLD PINE
Fin. Structure9206
PINO ANTICO SCUROFin. Struttura
1678 WHITE MAPLEFin. Structure
1678ACERO BIANCO
Fin. Struttura
9765VICTORIAN OAK
Fin. Structure9765
VICTORIAN OAKFin. Struttura
9726 BLANCHÈ
Fin. Structure9726
BLANCHÈFin. Struttura
386 NATIONAL OAK
Fin. Structure 386
ROVERE NAZIONALEFin. Struttura
9759CANADIAN OAK
Fin. Structure 9759
ROVERE CANADESEFin. Struttura
9234 OLD OAK
Fin. Structure 9234
ROVERE ANTICOFin. Struttura
9782ONTANO
Fin. Struttura9782
ONTANOFin. Structure
9590 BLEACHED ELM
Fin. Structure9590
OLMO SBIANCATOFin. Struttura
660 SAVOY PINEFin. Structure
660PINO SAVOIAFin. Struttura
9207 LIGHT OLD PINE
Fin. Structure9207
PINO ANTICO CHIAROFin. Struttura
9345 CADORE OLD PINE
Fin. Structure9345
PINO ANTICO CADOREFin. Struttura
659 SWISS PINE
Fin. Structure659
PINO SVIZZERAFin. Struttura
9232 RED OAK
Fin. Structure9232
ROVERE ROSSOFin. Struttura
9763AMERICAN OAK
Fin. Structure9763
ROVERE AMERICANOFin. Struttura
9764NATURAL OAKFin. Structure
9764NATURAL OAKFin. Struttura
9761SAW CUT OAK
Fin. Holz9761
SAW CUT OAKFin. Holz
9758CANYON OAKFin. Structure
9758CANYON OAKFin. Struttura
649 LIGHT SANTOSFin. Structure
649SANTOS CHIARO
Fin. Struttura
330 WENGÈ BANGUI
Fin. Structure330
WENGÈ BANGUIFin. Struttura
631 TEAK PLISSEFin. Structure
631TEAK PLISSEFin. Struttura
634 LIMBA NOIRFin. Structure
634LIMBA NOIRFin. Struttura
323 DARK OAK
Fin. Structure323
OAK SCUROFin. Struttura
9749WHITE PINE
Fin. Structure9749
WHITE PINEFin. Struttura
1636 ITALIAN WALNUT
Fin. Structure1636
NOCE ITALIANOFin. Struttura
1651 FOREST
Fin. Structure1651
FORESTFin. Struttura
621 ROSEWOODFin. Structure
621ROSEWOOD Fin. Struttura
PLANK AND LONG PLANK SIZE DESKA I DESKA DŁUGA
PLANK AND LONG PLANK SIZE DESKA I DESKA DŁUGA
PLANK AND LONG PLANK SIZE DESKA I DESKA DŁUGA
PLANK AND LONG PLANK SIZE DESKA I DESKA DŁUGA
Standard productions / Produkcja standardowa
630 ELLERO WALNUT
Fin. Structure630
NOCE ELLEROFin. Struttura
vintage
Standard productions / Produkcja standardowa26 27
392 WENGÈ DOUGLAS
Fin. Microline 392
DOUGLAS WENGÈFin. Microline
381 LIGHT DOUGLAS
Fin. Microline 381
DOUGLAS CHIAROFin. Microline
387 DARK DOUGLAS
Fin. Microline387
DOUGLAS SCUROFin. Microline
1611 CHERRY FEYFin. Nutshell
1611CILIEGIO FEYFin. Nutshell
1637 MARINE PEARFin. Nutshell
1637PERO MARINO
Fin. Nutshell
312 ZAMBIA WENGÈ
Fin. Nutshell312
WENGÈ ZAMBIAFin. Nutshell
9340 BROWN SHANGHAI
Fin. Longline9340
SHANGHAI BRUNOFin. Longline
9351 BLACKLINE
Fin. Microline9351
BLACKLINEFin. Microline
410 WHITE ICE
Fin. Structure410
BIANCO GHIACCIOFin. Struttura
604 COLONYFin. Holz
604COLONYFin. Holz
607 MORGAN ASH
Fin. Holz607
MORGAN ASHFin. Holz
624 ROERO WALNUT
Fin. Holz624
NOCE ROEROFin. Holz
385 OTTAWA MAPLE
Fin. Holz385
ACERO OTTAWAFin. Holz
602 BOHEMIAN OAK
Fin. Nutshell602
ROVERE BOEMIAFin. Nutshell
9760 CALIFORNIA WHITE OAK
Fin. Holz9760
CALIFORNIA WHITE OAKFin. Holz
9762OREGON WHITE OAK
Fin. Holz9762
OREGON WHITE OAKFin. Holz
9657 OILED OAKFin. Nutshell
9657ROVERE OLIATO
Fin. Nutshell
1385 WHITE ASH
Fin. Structure1385
WHITE ASHFin. Struttura
1384 MAJOR ASH Fin. Structure
1384FRASSINO MAGGIORE
Fin. Struttura
620 MAPLE
Fin. Nutshell620
MAPLE Fin. Nutshell
1387 SMOKED WOOD
Fin. Structure1387
SMOKED WOODFin. Struttura
344 BLOCK OAKFin. Nutshell
344ROVERE BLOCK
Fin. Nutshell
1386 SAW CUT ASHFin. Structure
1386SAW CUT ASHFin. Struttura
1388 GREY ZEBRANO
Fin. Structure1388
ZEBRANO GRIGIOFin. Struttura
PLANK SIZE DESKA
PLANK SIZE DESKA
PLANK SIZE DESKA
carpineta
Standard productions / Produkcja standardowa Standard productions / Produkcja standardowa28 29
548 PIASENTINA
Fin. Climb548
PIASENTINAFin. Climb
9251 SATIN ALUMINIUM
Fin. Microline9251
ALLUMINIO SATINFin. Microline
9728 CRUDE IRON
Fin. 669728
FERRO CRUDOFin. 66
546 TIVOLI
Fin. Climb546
TIVOLIFin. Climb
545 VOLCANOFin. Climb
545VULCANOFin. Climb
9745 ALALDA WOOD
Fin. Climb9745
ALALDA WOODFin. Climb
9464 CONCRETEFin. Climb
9464CEMENTOFin. Climb
9068 LIGHT CONCRETE
Fin. Climb9068
CEMENTO CHIAROFin. Climb
2811 MONGOLIAFin. Climb
2811MONGOLIAFin. Climb
9910 TWIST TEXTILE
Fin. Grana9910
TWIST TEXTILEFin. Grana
9914ACCIAIO GREZZO
Fin. Climb9914
RAW IRONFin. Climb
PLANK SIZE DESKA
410 WHITE ICE
Fin. 66 / Glossy / Climb410
BIANCO GHIACCIOFin. 66 / Lucida / Climb
410 WHITE ICE
Fin. 66 / Glossy410
BIANCO GHIACCIOFin. 66 / Lucida
414 SAND
Fin. 66 / Climb414
SABBIAFin. 66 / Climb
421 BLACK
Fin. 66 / Glossy421
NEROFin. 66 / Lucida
431 RED
Fin. 66 / Climb431
ROSSOFin. 66 / Climb
9001 WHITE ICEFin. Leather
9001BIANCO GHIACCIO
Fin. Leather
478 LIGHT GREY
Fin. 66478
GRIGIO CHIAROFin. 66
9003 WHITE IVORYFin. Leather
9003BIANCO AVORIO
Fin. Leather
879GRIGIO GRAFITE
Fin. 66879
GRAPHITE GREYFin. 66
9010 BLACK
Fin. Leather9010NERO
Fin. Leather
9012 RED
Fin. Leather9012
ROSSOFin. Leather
9015 COCONUTFin. Leather
9015COCONUTFin. Leather
871 GREY
Fin. Climb871
GRIGIOFin. Climb
421 BLACK
Fin. 66 / Glossy421
NEROFin. 66 / Lucida
801 STORM BLUE
Fin. 66801
AZZURRO TEMPESTAFin. 66
BIG TILES SIZE DUŻA PŁYTA
BIG TILES SIZE DUŻA PŁYTA
PLANK SIZE DESKA
BIG TILES SIZE DUŻA PŁYTA
materica brera
Standard productions / Produkcja standardowa Standard productions / Produkcja standardowa30 31
Gold
Parqcolor® gold
9234 OLD OAK32 33
Gold
Parqcolor® Gold
PARQCOLOR® GOLD COLLECTIONN° 6 Wood Patterns, 1 WhiteFinishes: StructurePlank sizes 18,8x120 cm - Thickness 8 mm Click joint – L2C Surface in Print HPL laminate - Thickness 0,6 mmAC5 Abrasion ResistanceClass 23-33 Level of use: heavy (intense traffic area)IC4 Impact Resistance
Parqcolor® Gold collection is a floating HPL floor.We have created this “entry level collection” in a limited colors range and HPL 0,6 mm thickness to offer a laminate floor with the best price/quality ratio in the market.The technical data are the same of Parqcolor Vintage: AC5, IC4, Bfl-s1, Permanently Antistatic, Class A+ and Class E1.It is possible to produce stairs treads and utilize the same accessories of Parqcolor Vintage collection.
KOLEKCJA PARQCOLOR® GOLD 6 propozycji wzorów drewna, 1 Bialawy Struktura powierzchni: StrutturaFormat: panel 18,8x120 cm - Grubość 8 mmSposób łączenia: system Click – L2CWarstwa wierzchnia z laminatu Print HPL - grubość 0,6 mmKlasa odporności na ścieranie AC5Klasa użytkowa 23 - 33: podwyższona (intensywny ruch pieszy)Klasa odporności na uderzenia IC4
Kolekcja Parqcolor Gold jest podłogą pływającą dekorowaną laminate HPL. Stworzyliśmy tę „ekonomiczną kolekcję” w ograniczonej gamie kolorystycznej, stosując jako warstwę dekoracyjną laminat HPL grubości 0.6 mm, aby zaoferować produkt o najlepszej na rynku relacji jakości do ceny.Parametry techniczne są takie same jak dla kolekcji Parqcolor Vintage: AC5, IC4, Bfl-s1, trwale antyelektrostatyczna, klasa A+ i E1.Na życzenie dostępne są również stopnice, a do montażu można używać akcesoriów przeznaczonych dla kolekcji Parqcolor Vintage.
34 35
Gold Gold
High pressure laminate, consisting of: • Overlay: high resistant protective layer • Decorative surface• Kraft Paper • Sanded layer
High pressure balancer, consisting of: • Sanded layer • Kraft Paper • Brown layer
HDF high density fiberboard wood panel
Parqcolor ® Gold HPL’ s characteristics:• Made in Italy: guaranteed and UNI EN ISO 9001:2008 certified - cert. n° 69. • Marking: obtained by means of an annual certification system issued by an external body authorised by the Interior Ministry. • Guarantee: 25 years for residential installations - 6 years for commercial installations.• Customisation: customisable decoration digitally printed. • High Thickness: flooring 8 mm thickness, with the wear surface in 0,6 mm thickness HPL laminate. • Limited Number of Joints: the thickness and stability of the planks make it possible to lay up to 150 sqm without expansion joints. • Stability: The Plank and Big Tiles are balanced with Print HPL laminate and so guarantee greater stability and flatness. • Maintenance-Free: no maintenance or waxing needed.• Light Resistance: total absence of photosensitivity. • Inalterability: total resistance to the transfer of pigments and plasticisers. • Fire Resistance: Euroclass Bfl-S1 fire reaction, when the source is eliminated flames are not propagated. Resistant to cigarette burns.
• Installation: floating flooring that can also be laid on fitted carpet bases and on floor slabs with radiant panel heating. • Permanently Antistatic: absence of the build up of static electricity. • Stain Resistance: closed pore flooring that is resistant to chemical agents, ink, paint, and any type of stain that can be removed using solvents. • Aseptic: immune to attack by micro organisms, maximum hygiene.• Formaldehyde Emission: the HPL quality guarantees values 10 times lower than the current norms. • Slip Resistance: complies with the new European EN 13893:2002 standard, dynamic friction coefficient, Class DS.• Eco-Compatible and Recyclable: all the raw materials used in manufacturing Parqcolor® flooring are sourced from Sustainably Managed Forests - FSC Standard (Forest Stewardship Council).• HDF - High Density Fibreboard: constitutes the support for the Plank, Long Plank and the Big Tiles, a panel made up of wood fibres bonded using a special resin with good mechanical properties, excellent dimensional stability, and compactness along the edges (density above 850 kg/m3).
Charakterystyka podłóg Parqcolor® HPL:• Produkcja we Włoszech spełniają wymagania normy UNI EN ISO 9001:2008, certyfikat nr 69. • Oznakowanie : uzyskane w drodze procesu certyfikacji prowadzonego przez niezależne laboratorium pod nazorem Ministerstwa Spraw Wewnętrznych Włoch.• Gwarancja: 25 lat w przestrzeniach mieszkalnych – 6 lat w przestrzeniach publicznych.• Personalizacja: możliwość produkcji w indywidualnie zaprojektowanym wzorze w technologii druku cyfrowego.• Duża grubość: całkowita grubość panelu to 8 mm, a powierzchnia dekoracyjna podlegająca obciążeniom użytkowym to aż 0,6 mm laminatu HPL.• Ograniczona liczba łączeń dylatacyjnych: duża grubość i związana z nią stabilność wymiarowa paneli pozwala na położenie do 150 m2 podłogi bez dylatacji.• Stabilność: we wszystkich formatach paneli warstwę dekoracyjną i przeciwprężną stanowi laminat HPL, co gwarantuje jej większą stabilność wymiarową i płaskość.• Nie wymaga konserwacji powierzchni: brak konieczności pastowania czy woskowania.• Odporność na działanie światła: całkowita odporność na płowienie.• Niezmienność wyglądu: nie wchłania barwników i plastyfikatorów.• Odporność ogniowa: zgodnie z Euroklasą Bfl-S1, podłoga nie rozprzestrzenia ognia. Jej powierzchnia jest odporna na żar papierosa.
• Montaż: podłogi można instalować również na istniejących wykładzinach dywanowych oraz wylewkach kryjących instalacje ogrzewania podłogowego.• Antyelektrostatyczność: nie gromadzi na powierchni ładunków elektrostatycznych.• Odporność na zaplamienia: zamknięta struktura komórkowa powierzchni jest odporna na chemikalia, atrament, farby i lakiery, a zabrudzenia i zaplamienia można usuwać przy pomocy rozpuszczalników.• Aseptyczność: powierzchnia podłogi jest odporna na działanie mikrogranizmów, nie sprzyja również ich namnażaniu się, gwarantując zachowanie maksimum higieny.• Emisja formaldehydu: jakość użytego laminatu HPL gwarantuje poziom emisji formaldehydu 10 razy mniejszy od dopuszczalnego. • Antypoślizgowość: zgodnie z nową normę europejską EN 13893:2002 współczynnik tarcia dynamicznego - klasa DS.• Ekologiczność i możliwość recyklingu: wszystkie surowce stosowane w produkcji podłóg pływających Parqcolor®
pochodzą ze źródeł posiadających certyfikat FSC (Forest Stewardship Council).• HDF - High Density Fiberboard: płyta rdzeniowa podłogi o gęstości powyżej 850kg/m3, produkowana jest z włókien drzewnych wiązanych specjalną żywicą, gwarantuje znakomitą stabilność wymiarową oraz zwartość wzdłuż krawędzi panelu.
Laminat wysokociśnieniowy, składający się z:• Overlayu: warstwy ochronnej o wysokiej odporności• Warstwy dekoracyjnej• Papieru Krafta• Spodniej warstwy szlifowanej
Warstwa przeciwprężna, składająca się z:• Spodniej warstwy szlifowanej• Papieru Krafta• Warstwy brązowego papieru
HDF płyta rdzeniowa o podwyższonej gęstości
36 37
Standard productions / Produkcja standardowa
383 EUROPE OAK
Fin. Structure matt383
ROVERE EUROPAFin. Struttura opaca
PLANK DESKA
gold
1678 WHITE MAPLE
Fin. Structure matt1678
ACERO BIANCOFin. Struttura opaca
410 WHITE ICE
Fin. Structure cera410
BIANCO GHIACCIOFin. Struttura cera
602 BOHEMIAN OAK
Fin. Structure matt602
ROVERE BOEMIAFin. Struttura opaca
607 MORGAN ASH
Fin. Structure matt607
MORGAN ASHFin. Struttura opaca
9234 OLD OAK
Fin. Structure matt9234
ROVERE ANTICOFin. Struttura opaca
1387 SMOKED WOOD
Fin. Structure matt1387
SMOKED WOODFin. Struttura opaca
38 39
Parqcolor® stair treads stopnice schodowe
Stair treads / Stopnice schodowe40 41
Stair treads / Stopnice schodowe
PARQCOLOR® STAIR TREADSThe stair treads system can be used to create steps in 11 mm thickness.All the decors of the Parqcolor® collections are available on demand, except for the ones included only in the Big Tiles range. Easy to install, the long side has a click routering in order to insert the Planks and continue with the flooring.Bending radius 10 mm, bar length 1160 - 1760 mm.
PARQCOLOR® STOPNICE SCHODOWE Opracowany system stopnic grubości 11 mm pozwala na obłożenie schodów w harmonii z podłogą. Stopnice oferowane są w całej gamie wzorniczej podłóg poza kolekcją Dużych Płyt. Są również odpowiednio frezowane po dłuższym boku, co pozwala łączyć je bezproblemowo w systemie CLICK z położoną podłogą. Długość 1160 – 1760 mm, promień zagięcia podstopnicy - 10 mm.
Parqcolor® stair treadsstopnice schodowe
42 43
Type A
Type B
Type C right
Type C left
Complementary profiles for lateral step finishing are available in kiln-dried wood.
TYPE A: wall-side lateral plinth (to cover trade)• Sizes: height 44 mm, length 360 mm • Pack of n° 6 pieces.
TYPE B: wall-side lateral plinth (to cover riser)• Sizes: height 59 mm, length 500 mm • Pack of n° 6 pieces.
TYPE C: external complementary profile• Sizes: height 59 mm, length 600 mm • Pack of n° 6 pieces.
Note:For type C, please specify whether you require a profile for the right or left hand side (facing the steps at the bottom of the stairs).
Complimentary profilesfor lateral step finishing.
Stair treads Stopnice schodowe
Typ A
Typ B
Typ C prawy
Typ C lewy
Cokoły boczne stopnic schodowych wykonane z drewna suszonego w piecu.
TYP A: cokół boczny przyścienny poziomy • Wymiary: wysokość 44 mm, długość 360 mm• Opakowanie handlowe: 6 szt. w kartonie.
TYP B: cokół przyścienny pionowy• Wymiary: wysokość 59 mm, długość 500 mm• Opakowanie handlowe: 6 szt. w kartonie.
TYP C: cokół zewnętrzny (lewy lub prawy)• Wymiary: wysokość 59 mm, długość 600 mm• Opakowanie handlowe: 6 szt. w kartonie.
Uwaga:Rodzaj cokołu (lewy/prawy) należy określić stojąc u podnóża schodów, twarzą do ich biegu.
Profile uzupełniające do wykańczania boków stopni.
44 45
Skirting boards / Cokoły i listwy przypodłogowe
Skirting boards in MDF (Medium Density Fibreboard) covered with decorative paper, length 240 cm - n° 10 strips per pack.MDF with low formaldehyde emission according to EN 120 (class E1). The use of solvents and formaldehyde is forbidden in the decors gluing operations. The folden are printed on FSC certified paper. The skirting boards have an excellent resistance, high stability and high resistance to impact, as well as being easy to clean. Skirting board available for all the decors included in the Parqcolor® Collection. Customised digital printed decors on demand. CLIPSTAR SKIRTING BOARD FIXING SYSTEM The “Push & Press” system allows the invisible fixing of the strips possible even on irregular walls. Steel clip, spring with anti-corrosive protective layer. Clip complete with channel for the passage of cables up to 7 mm diameter, which can also be installed at a later time. The clip allows multiple fittings and removals of the strip, or even the replacement of the skirting without the use of tools.
Cokoły i listwy przypodłogowe o długości 240 cm wykonane są z płyty MDF (Medium Density Fiberborad) oklejonej papierem dekoracyjnym (opakowanie handlowe liczy 10 szt.)Płyta MDF o niskiej emisji formaldehydu zgodnie z normą EN 120 (klasa E1). W procesie klejenia nie stosuje się rozpuszczalników ani formaldehydu. Elementy dekoracyjne drukowane są na papierze posiadającym certyfikat FSC. Listwy cokołowe charakteryzują się doskonałą odpornością, wysoką stabilnością i odpornością na uderzenia. Są łatwe w czyszczeniu. Listwy cokołowe dostępne są w pełnej kolorystyce Kolekcji Parqcolor®.Na zamówienie możliwa jest produkcja we wzorach zaprojektowanych przez klienta. SYSTEM CLIPSTAR DO MOCOWANIA LISTEWMontaż w systemie CLIPSTAR metodą „push & press” pozwala na bezproblemowe mocowanie listew nawet do nierówno wyprowadzonych ścian. Stalowy klip i sprężyna pokryte są warstwą antykorozyjną. Klip posiada kanał pozwalający na prowadzenie przewodów o średnicy do 7 mm. System ten pozwala na wielokrotny montaż i demontaż listwy, jak również jej wymianę bez użycia narzędzi.
Parqcolor® Skirting boardsCokoły i listwyPrzypodłogowe
849 BLU PAVONE46 47
Akcesoria Parqcolor® / Accessories
Parqcolor® Accessories Akcesoria
633 LIMBA GOLD48 49
Cod. 9145 - 9146
Cod. 9156 - 9158
Cod. 9160 - 9162 - 9175 - 9177
Cod. RC 11 - RC 9
END AND TRANSITION MOULDING IN ANODIZED ALUMINIUM Cod. 9146 - Base support - unanodized for thickness 11 mm. Cod. 9145 Base support - unanodized for thickness 8 mm.Cod. 9156, transition silver for thickness 8/11 mm.Cod. 9158, transition bronze for thickness 8/11 mm.Cod. 9160, reducer silver for thickness 11 mm.Cod. 9162, reducer bronze for thickness 11 mm.Cod. 9175, reducer silver for thickness 8 mm.Cod. 9177, reducer bronze for thickness 8 mm.Cod. 9120 - RC/11, C-shaped silver for thickness 11 mm.Cod. 9122 - RC/11, C-shaped bronze for thickness 11 mm.Cod. 9190 - RC/9, C-shaped silver for thickness 8 mm.Cod. 9192 - RC/9, C-shaped bronze for thickness 8 mm.(All types are available in bars of 3,00 m long).
Installation Accessories
SUPER MOUSSE Closed-cell polyethylene foam combined with a three layer red polyethylene sheet (200 microns thickness) with a total thickness of 2 mm and height 120 cm.Available in rolls of 50 / 150 sqm. EXPO MOUSSE Closed-cell polyethylene foam combined with a layer green polyethylene sheet (150 microns thickness) with a total thickness of 1,5 mm and height 120 cm.Available in rolls of 50 / 150 sqm. POLY-FELT UNDERLAYWhite felt underlay with sound proofing properties, combined with a three layer blue polyethylene sheet, (200 microns thickness) whit a total thickness of 2,7 mm and height 120 cm.Available in rolls of 50 / 150 sqm. POLYETHYLENE SHEET / MOISTURE BARRIERCo-extruded polythene, thickness 120 microns, height 140 cm.Available in rolls of 100 sqm.PARQCOLOR® VINYL GLUED3 moisture resistant vinyl glue. Available in 0,5 kg bottles or 5 kg drums.
Parqcolor ® Installation Accessories
PARQCOLOR® CLEANING Deep cleaner for laminates - available in 1 lit bottles. DETERGENT FOR LAMINATE FLOORS Cleaner for maintenance - available in 1 lit spray bottles.
Maintenance products
Akcesoria Parqcolor®Parqcolor® Accessories
Kod 9145 - 9146 Kod 9160 - 9162 - 9175 - 9177
PROFILE KOŃCOWE I PRZEJŚCIOWE Z ALUMINIUM ANODOWANEGOKod 9146 - wspornik podstawowy – anodowany dla grubości 11 mm.
Kod 9145 - wspornik podstawowy – anodowany dla grubości 8 mm.
Kod 9156 - łącznik dylatacyjny srebrny, dla grubości 8/11 mm.
Kod 9158 - łącznik dylatacyjny brązowy, dla grubości 8/11 mm.
Kod 9160 - łącznik redukcyjny srebrny dla grubości 11 mm.
Kod 9162 - łącznik redukcyjny brązowy dla grubości 11 mm.
Kod 9175 - łącznik redukcyjny srebrny dla grubości 8 mm.
Kod 9177 - łącznik redukcyjny brązowy dla grubości 8 mm.
Kod 9120 RC/11- element końcowy typu C srebrny dla grubości 11 mm. Kod 9122 RC/11- element końcowy typu C brązowy
dla grubości 11 mm. Kod 9190 RC/9- element końcowy typu C srebrny dla grubości 8 mm. Kod 9192 RC/9- element końcowy
typu C brązowy dla grubości 8 mm.
(Wszystkie typy dostępne są w postaci listew o długości 3 metry).
Akcesoria do montażu
PIANKA SUPER MOUSSE Pianka poliuretanowa o zamkniętych komórkach połączona z trójwarstwowym arkuszem polietylenu czerwonego (o grubości 200 μm), o grubości całkowitej 2 mm i szerokości rolki 120 cm.Dostępna w rolkach o powierzchni 50 / 150 m2. PIANKA EXPO MOUSSE Pianka poliuretanowa o zamkniętych komórkach połączona z jedną warstwą arkusza polietylenu zielonego (o grubości 150 μm), o grubości całkowitej 1,5 mm i szerokości rolki 120 cm.Dostępna w rolkach o powierzchni 50 / 150 m2.PODKŁAD Z FILCU WIELOWARSTWOWEGOPodkład z białego filcu o właściwościach tłumienia dźwięków, połączony z trzywarstwowym polietylenem niebieskim (o grubości 200 μm), o grubości całkowitej 2,7 mm i szerokości rolki 120 cm.Dostępny w rolkach o powierzchni 50 / 150 m2.FOLIA POLIETYLENOWA / WARSTWA PRZECIWWILGOCIOWAPolietylen ekspandowany o grubości 120 μm, szerokość rolki 140 cm.Folia dostępna w rolkach o powierzchni 100 m2.KLEJ WINYLOWY PARQCOLOR® Klej winylowy o klasie odporności na wilgoć D3.Dostępny w butelkach o pojemności 0,5 kg lub puszkach 5 kg.
Akcesoria Parqcolor®
ŚRODEK DO CZYSZCZENIA PARQCOLOR® CLEANING Środek do czyszczenia podłóg laminowanych o dużej skuteczności - dostępny w butelkach o pojemności 1 litr.
DETERGENT DO PODŁÓG Z LAMINATÓWŚrodek do konserwacji - dostępny w aerozolu w butelkach o pojemności 1 litr.
Produkty do konwerwacji podłóg
Kod 9156 - 9158 Kod RC 11 - RC 9
50 51
Technical and commercial dataDane techniczne i handlowe
Technical and commercial dataDane technicznei handlowe
Podłogi Parqcolor®
Tabela zbiorcza klas użytkowych wg normy EN 13329
Klasa Symbol Poziom użytkowania Opis Ścieralność
21 Umiarkowany Słaby ruch pieszy AC1
22 Przeciętny Średni ruch pieszy AC2
23 Podwyższony Intensywny ruch pieszy AC3
31 Umiarkowany Słaby ruch pieszy AC3
32 Przeciętny Średni ruch pieszy AC4
33 Podwyższony Intensywny ruch pieszy AC5
23
23
22
22
21
21
PRZESTRZENIE PUBLICZNE
PRZESTRZENIE MIESZKALNE
Parqcolor® Floor
Class Symbol Level of use Description Abrasion Resistance
21 Moderate Light traffic area AC1
22 General Medium traffic area AC2
23 Heavy Intense traffic area AC3
31 Moderate Light traffic area AC3
32 General Medium traffic area AC4
33 Heavy Intense traffic area AC5
23
23
22
22
21
21
SUMMARY OF CLASSES OF USE ACCORDING TO EN 13329 NORM
DOMESTIC
COMMERCIAL
1678 WHITE MAPLE52 53
TECHNICAL DATA SHEET THICKNESS 11 / 8 mm
Test method
Criteria and/or unit of measure Limit Result
EN 13329:2006+A1 2008 ANNEX E
EN 13329:2006+A1 2008 ANNEX G
EN 425 w (EN 12529)
EN 424 with type 0 foot
EN 13329:2006+A1 2008 ANNEX F
EN 438:2005-2.26
EN 438:2005-2.27
EN 438:2005-2.30
EN 433
UNI EN 1815: 1999
EN 13501-1:2002
EN 61340:2004-4-1
Initial abrasion resistance point
Swelling %
Aspect
Aspect
Impact class
Contrast
Aspect
Aspect
KV
Euroclass
Resistance from point to point
AC 5 according to EN 685:2007
≥6000 Taber wheel revs
≤ 18
No visible damage
No visible damage
≥ IC3
Grade:groups 1 and 2=5groups 3 and 4≥4
From 4 to 5 according to EN
20105-A02
Classification≥4
No visible change
≤ 0,01mm
AC 5 ≥ 6000 Taber wheel revs
8
No damage
No damage
IC4
Grade = 5Grade > 4
>4
5
No visible change
≤ 2,0
Bfl-S1
109 ≤ Rp ≤1011ohm (antistatic material)
Abrasion resistance
Thicknessswelling
Effect of castor chair
Effect of movements of furniture legs
Impact resistance
Stain resistance
Colour resistance to xenon light
Resistance to cigarette burns
Residual mark after static load
Electrical surface resistance
Propensity to accumulation ofstatic electricity
Reaction to fire
Technical and commercial data Technical and commercial data
Parqcolor®flooring: COMMERCIAL DATA - 11 MM THICKNESS• Vintage Collection:Plank sizes: width 18,8 cm – length 120 / 180 cm - thickness 11 mm – weight 10,20 kg/sqm package: n° 6 Planks 120 cm long, equivalent to 1,35 sqm. - n° 6 Long Planks 180 cm long, equivalent to 2,03 sqm. • Carpineta, Materica, Brera CollectionsPlank sizes: width 18,8 cm – length 120 / 180 cm - thickness 11 mm – weight 10,20 kg/sqm package: n° 6 Planks 120 cm long, equivalent to 1,35 sqm• Materica, Brera Collections - Big Tiles Size Dimensions: 59x59 cm - thickness 11 mm - weight 10,20 kg/sqm - package: n° 4 tiles, equivalent to 1,39 sqm Dimensions: 39x79 cm - thickness 11 mm - weight 10,20 kg/sqm - package: n° 4 tiles, equivalent to 1,23 sqm Dimensions: 59x120 cm - thickness 11 mm - weight 10,20 kg/sqm - package: n° 4 tiles, equivalent to 2,83 sqm.
PRODUCT SPECIFICATION• Vintage, Carpineta, Materica, Brera Collections - Plank or Long Plank size:Plank or Long Plank obtained by sectioning a compound made up of an HDF wood fibre support (High Density Fiberboard - density exceeding 850 kg/m3) external surface decorated in Print HPL High Pressure Laminate and balanced with Print HPL High Pressure Laminate. Flooring 11 mm thickness Class of use 23 (domestic - heavy level) 33 (commercial - heavy level), according to the EN 685:2007 and EN 13329:2006+A1:2008 standard Abrasion resistance AC5 ≥ 6000 Taber wheel revs Impact resistance IC4 Permanently Antistatic Class DS - slip resistance Ecological Class E1 - formaldehyde emission.
Laid floating resting on a closed cell polyetylene foam underlay bonded to a polyethylene sheet, total thickness 2,2 mm (Super Mousse) which serves as moisture barrier. The flooring thus obtained (floor and underlay) is certified to be Euroclass Bfl-s1 fire resistant according to the EN 13501-1:2002 standard (corresponds to previous class 1).The Plank and Long Plank are connected by means of a click joint system on 4 sides, of an L2C click type, which allows the installation without glue. For surfaces with sides that exceed 15,00 m crosswise and 20,00 m lengthwise must be foreseen suitable expansion joints. Always leave a perimeter space of at least 10 mm to allow the flooring to expand.
PRODUCT SPECIFICATION• Materica, Brera Collections - Big Tiles size:Big Tiles obtained by sectioning a compound made up of an HDF wood fibre support (High Density Fiberboard - density exceeding 850 kg/m3) external surface decorated in Print HPL High Pressure Laminate and balanced with Print HPL High Pressure Laminate.
Flooring 11 mm thickness Class of use 23 (domestic - heavy level) 33 (commercial - heavy level), according to the EN 685:2007 and EN 13329:2006+A1:2008 standard Abrasion resistance AC5 ≥ 6000 Taber wheel revs Impact resistance IC4 Permanently Antistatic Class DS - slip resistance Ecological Class E1 - formaldehyde emission.
Laid floating resting on a closed cell polyetylene foam underlay bonded to a polyethylene sheet, total thickness 2,2 mm (Super Mousse) which serves as moisture barrier.The flooring thus obtained (floor and underlay) is certified to be Euroclass Bfl-s1 fire resistant according to the EN 13501-1:2002 standard (corresponds to previous class 1).The Big tiles must be laid staggered and glued to one another, by applying Parqcolor® Vinyl Glue or an equivalent product that is group D3 water resistant according to the EN204/205 standard, in the groove (short and long side). For surfaces with sides that exceed 15,00 m crosswise and 20,00 m lengthwise must be foreseen suitable expansion joints. Always leave a perimeter space of at least 10 mm to allow the flooring to expand.
COMMERCIAL DATA - 8 MM THICKNESS• Vintage, Carpineta, Materica, Brera Collections Plank sizes: width 18,8 cm – length 120 cm - thickness 8 mm – weight 8,00 kg/sqm package: n° 8 Planks, equivalent to 1,80 sqm.
PRODUCT SPECIFICATION• Vintage, Carpineta, Materica, Brera Collections - Plank size: Plank obtained by sectioning a compound made up of an HDF wood fibre support (High Density Fiberboard - density exceeding 850 kg/m3) external surface decorated in Print HPL High Pressure Laminate and balanced with Print HPL High Pressure Laminate.
Flooring 8 mm thickness Class of use 23 (domestic - heavy level) 33 (commercial - heavy level), according to the EN 685:2007 and EN 13329:2006+A1:2008 standard Abrasion resistance AC5 ≥ 6000 Taber wheel revs Impact resistance IC4 Permanently Antistatic Class DS - slip resistance Ecological Class E1 - formaldehyde emission.
Laid floating resting on a closed cell polyetylene foam layer bonded to a polyethylene sheet, total thickness 2,2 mm (Super Mousse) which serves as moisture barrier.The flooring thus obtained (floor and underlay) is certified to be Euroclass Bfl-s1 fire resistant according to the EN 13501-1:2002 standard (corresponds to previous class 1).The Planks are connected by means of an L2C type click joint system on all 4 sides, which allows the installation without glue.For surfaces with sides that exceed 8,00 m crosswise and 10,00 m lengthwise must be foreseen suitable expansion joints. Always leave a perimeter space of at least 8 mm to allow the flooring to expand.
54 55
DANE TECHNICZNE GRUBOŚĆ 11 / 8 mm
Metodabadań
Kryterium lub jedno-stka masy masy
Wartość wg normy Wynik
EN 13329:2006+A1 2008 Aneks E
EN 13329:2006+A1 2008 Aneks G
EN 425 w (EN 12529)
EN 424 z nogą typu 0
EN 13329:2006+A1 2008 Aneks F
EN 438:2005-2.26
EN 438:2005-2.27
EN 438:2005-2.30
EN 433
UNI EN 1815: 1999
EN 13501-1:2002
EN 61340:2004-4-1
Liczbaobrotów
(IP)
Przyrost grubości %
Wygląd
Wygląd
Klasyfikacja IC
Kontrast
Zmiana
Zmiana
KV
Euroklasa
Oporność międzydwoma punktami
AC 5 zgodnie z EN685:2007
≥6000 obrotów Tabera
≤ 18
Żadnych widocznych uszkodzeń
Żadnych widocznych uszkodzeń
≥ IC3
Klasyfikacja grupy 1 i 2=5grupy 3 i 4≥4
Od 4 do 5 zgodnie zEN 20105-A02
Klasyfikacja≥4
Bez widocznych zmian≤ 0,01mm
AC 5 ≥ 6000 obr.tarczy Tabera
8
Żadnych wi-docznych uszkodzeń
IC4
Klasa = 5Klasa> 4
>4
5
Bez widocznych zmian
≤ 2,0
Bfl-s1
109 ≤ Rp ≤1011
ohm (materiałantyelektrostatyczny)
Odporność naścieranie
Pęcznieniegrubości
Efekt oddziaływania krzeseł na kółkach
Efekt oddziaływania nóg mebli
Odporność na uderzenia
Odporność nazaplamienie
Trwałość koloru(lampa ksenon.)
Odporność nażar papierosa
Odporność na wgnie-cenia punktowe
Oporność elektryczna powierzchni
Właściwości antystatyczne
Reakcja na ogień
Żadnych wi-docznych uszkodzeń
Dane techniczne i handloweDane techniczne i handlowe
Podłoga Parqcolor® INFORMACJE HANDLOWE GRUBOŚĆ 11 MM• Kolekcja Vintage:Format paneli: szerokość 18,8 cm – długość 120 / 180 cm – grubość 11 mm – waga 10,20 kg/m2 Opakowanie handlowe: 6 paneli o długości 120 cm = 1,35 m2 - 6 paneli o długości 180 cm = 2,03 m2.• Kolekcja Carpineta, Materica, Brera - Deski: Format paneli: szerokość 18,8 cm – długość 120 cm – grubość 11 mm – waga 10,20 kg/m2
Opakowanie handlowe: 6 paneli o długości 120 cm = 1,35 m2.• Kolekcja Materica, Brera - Duże płyty: Format paneli: 59X59 cm – grubość 11 mm - waga 10,20 kg/m2 - opakowanie handlowe: 4 panele = 1,39 m2; Format paneli: 39X79 cm – grubość 11 mm- waga 10,20 kg/m2 - opakowanie handlowe: 4 panele = 1,23 m2; Format paneli: 59X120 cm – grubość 11 mm - waga 10,20 kg/m2 - opakowanie handlowe: 4 panele = 2,83 m2.
DANE TECHNICZNE• Kolekcja Vintage, Carpineta, Materica, Brera - Deski i Deski Długie:Deski i deski długie składają się z płyty rdzeniowej HDF (o gęstości powyżej 850 kg/m3) obłożonej z wierzchu dekoracyjnym laminatem Print HPL, a od spodu warstwą przeciwprężną również z laminatu Print HPL.
Podłoga o grubości 11 mm Klasa użytkowa wg normy EN 685:2007 i EN 13329:2006+A1:2008: 23 dla powierzchni mieszkalnych i 33 dla powierzchni publicznych (podwyższona) Odporność na ścieranie AC5 ≥ 6000 obrotów Tabera Odporność na uderzenia IC4 Antyelektrostatyczna Antypoślizgowość: klasa DS Emisja formaldehydu: klasa E1.
Panele służą do budowy podłogi pływającej na podkładzie z maty z folii PE oraz spienionego polietylenu o zamkniętej strukturze komórkowej, łącznej grubości 2.2 mm (pianka Super Mousse), służącej jako bariera przeciwwilgociowa i akustyczna. Podłoga wraz z podkładem posiada atestację w klasie Bfl-s1 reakcji na ogień zgodnie z normą EN 13501: 2002 (odpowiadającą wcześniejszej klasie 1). Montaż desek i desek długich odbywa się za pomocą systemu Cllick L2C, który umożliwia montaż bez użycia kleju.Dla powierzchni podłogi o boku przekraczającym 15 mb wszerz i 20 mb wzdłuż paneli należy zastosować odpowiednie profile dylatacyjne. Konieczne jest również pozostawienie min 10 mm przestrzeni dylatacyjnej wzdłuż krawędzi zewnętrznej podłogi pozwalającej na jej rozszerzanie się.
DANE TECHNICZNE• Kolekcja Materica, Brera - Duże płyty:Duże płyty składają się z płyty rdzeniowej HDF (o gęstości powyżej 850 kg/m3) obłożonej z wierzchu dekoracyjnym laminatem Print HPL, a od spodu warstwą przeciwprężną również z laminatu Print HPL.
Podłoga o grubości 11 mm Klasa użytkowa wg normy EN 685:2007 i EN 13329:2006+A1:2008: 23 dla powierzchni mieszkalnych i 33 dla powierzchni publicznych (podwyższona) Odporność na ścieranie AC5 ≥ 6000 obrotów Tabera Odporność na uderzenia IC4 Antyelektrostatyczna Antypoślizgowość: klasa DS Emisja formaldehydu: klasa E1.
Panele służą do budowy podłogi pływającej na podkładzie z maty z folii PE oraz spienionego polietylenu o zamkniętej strukturze komórkowej, łącznej grubości 2.2 mm (pianka Super Mousse), służącej jako bariera przeciwwilgociowa i akustyczna. Podłoga wraz z podkładem posiada atestację w klasie Bfl-s1 reakcji na ogień zgodnie z normą EN 13501: 2002 (odpowiadającą wcześniejszej klasie 1). Montaż dużych płyt na pióro-wpust, trwałe łączenie za pomocą wodoodpornego kleju Vinil Parqcolor® lub odpowiednika (norma EN 204/205, grupa D3). Dla powierzchni podłogi o boku przekraczającym 15 mb wszerz i 20 mb wzdłuż paneli należy zastosować odpowiednie profile dylatacyjne. Konieczne jest również pozostawienie min 10 mm przestrzeni dylatacyjnej wzdłuż krawędzi zewnętrznej podłogi pozwalającej na jej rozszerzanie się.
INFORMACJE HANDLOWE GRUBOŚĆ 8 MM:• Kolekcja Vintage, Carpineta, Materica, Brera: Format paneli: szerokość 18,8 cm – długość 120 cm – grubość 8 mm – waga 8 kg/m2.Opakowanie handlowe: 8 paneli = 1,80 m2.
DANE TECHNICZNE• Kolekcja Vintage, Carpineta, Materica, Brera - Deski:Deski składają się z płyty rdzeniowej HDF (o gęstości powyżej 850 kg/m3) obłożonej z wierzchu dekoracyjnym laminatem Print HPL, a od spodu warstwą przeciwprężną również z laminatu Print HPL.
Podłoga o grubości 8 mm Klasa użytkowa wg normy EN 685:2007 i EN 13329:2006+A1:2008: 23 dla powierzchni mieszkalnych i 33 dla powierzchni publicznych (podwyższona) Odporność na ścieranie AC5 ≥ 6000 obrotów Tabera Odporność na uderzenia IC4 Antyelektrostatyczna Antypoślizgowość: klasa DS Emisja formaldehydu: klasa E1.
Ułożona podłoga spoczywa na podkładzie z maty z folii PE oraz spienionego polietylenu o zamkniętej strukturze komórkowej, łącznej grubości 2.2 mm (pianka Super Mousse), służącej jako bariera przeciwwilgociowa. Podłoga posiada atestację w klasie Bfl-s1 reakcji na ogień zgodnie z normą EN 13501: 2002 (odpowiadającą wcześniejszej klasie 1). Montaż paneli odbywa się za pomocą systemu Cllick L2C, który umożliwia ich łączenie bez użycia kleju.Dla powierzchni podłogi o boku przekraczającym 8 mb wszerz i 10 mb wzdłuż paneli należy zastosować odpowiednie profile dylatacyjne. Konieczne jest również pozostawienie min 8 mm przestrzeni dylatacyjnej wzdłuż krawędzi zewnętrznej podłogi pozwalającej na jej rozszerzanie się.
56 57
9759 CANADIAN OAK58 59
THICKNESS 11,0 mm
188 142
330
RADIUS 10 mm
50
308
73°+/- 2°
THICKNESS 8,0 mm
188 142
330
RADIUS 10 mm
50
308
73°+/- 2°
THICKNESS 11,0 mm
188 142
330
RADIUS 10 mm
50
308
73°+/- 2°
THICKNESS 8,0 mm
188 142
330
RADIUS 10 mm
50
308
73°+/- 2°
TECHNICAL DATA SHEET THICKNESS 11 / 8 mm
Test method
Criteria and/or unit of measure
Limit Result
EN 13329:2006+A1 2008 ANNEX E
EN 13329:2006+A1 2008 ANNEX G
EN 425 w (EN 12529)
EN 424 with type 0 foot
EN 13329:2006+A1 2008 ANNEX F
EN 438:2005-2.26
EN 438:2005-2.27
EN 438:2005-2.30
EN 433
UNI EN 1815: 1999
EN 13501-1:2002
EN 61340:2004-4-1
Initial abrasion resistance point
Swelling %
Aspect
Aspect
Impact class
Contrast
Aspect
Aspect
KV
Euroclass
Resistance from point to point
AC 5 according to EN 685:2007
≥6000 Taber wheel revs
≤ 18
No visible damage
No visible damage
≥ IC3
Grade:groups 1 and 2=5groups 3 and 4≥4
From 4 to 5 according to EN
20105-A02
Classification≥4
No visible change
≤ 0,01mm
AC 5 ≥ 6000 Taber wheel revs
8
No damage
No damage
IC4
Grade = 5Grade > 4
>4
5
No visible change
≤ 2,0
Bfl-S1
109 ≤ Rp ≤1011ohm (antistatic material)
Abrasion resistance
Thicknessswelling
Effect of castor chair
Effect of movements of furniture legs
Impact resistance
Stain resistance
Colour resistance to xenon light
Resistance to cigarette burns
Residual mark after static load
Electrical surface resistance
Propensity to accumulation ofstatic electricity
Reaction to fire
SUMMARY OF CLASSES OF USE ACCORDING TO EN 13329 NORM
Class Symbol Level of use Description Abrasion Resistance
21 Moderate Light traffic area AC1
DOMESTIC
22 General Medium traffic area AC2
23 Heavy Intense traffic area AC3
COMMERCIAL
31 Moderate Light traffic area AC3
32 General Medium traffic area AC4
33 Heavy Intense traffic area AC5
23
23
22
22
21
21
Technical data: stair treadsTechnical data: stair treads
Tread dimensions: 33X5X116 cm – 33X5X176 cm – thickness 11 mm - weight 10,20 kg/sqm – package: n° 3 treads. Alternative, on demand, only combined with 8 mm thickness floors. Tread dimensions: 33X5X116 cm – thickness 8 mm - weight 8,00 kg/sqm – package: n° 4 treads.
Parqcolor ® stair treadsPRODUCT SPECIFICATION, 11 MM THICKNESS:Treads obtained by sectioning a compound made up of an HDF wood fibre support (High Density Fiberboard - density exceeding 850 kg/m3) external surface decorated in Print HPL High Pressure Laminate and balanced with Print HPL High Pressure Laminate. The tread is bent by post-forming the compound by injecting high density polyurethane, thereby obtaining a continuous “tread + nose” module.
Tread 11 mm thickness Class of use 23 (domestic - heavy level) 33 (commercial - heavy level), according to the EN 685:2007 and EN 13329:2006+A1:2008 standard Abrasion resistance AC5 ≥ 6000 Taber wheel revs Impact resistance IC4 Permanently Antistatic Class DS - slip resistance Ecological Class E1 - formaldehyde emission.
PRODUCT SPECIFICATION, 8 MM THICKNESS:Treads obtained by sectioning a compound made up of an HDF wood fibre support (High Density Fiberboard - exceeding 850 kg/m3) external surface decorated in Print HPL High Pressure Laminate and balanced with Print HPL High Pressure Laminate. The tread is bent by post-forming the compound by injecting high density polyurethane, thereby obtaining a continuous “tread + nose” module.
Tread 8 mm thickness Class of use 23 (domestic - heavy level) 33 (commercial - heavy level), according to the EN 685:2007 and EN 13329:2006+A1:2008 standard Abrasion resistance AC5 ≥ 6000 Taber wheel revs Impact resistance IC4 Permanently Antistatic Class DS - slip resistance Ecological Class E1 - formaldehyde emission.
INSTRUCTIONS FOR LAYING PARQCOLOR® STAIR TREADS
• Parqcolor® stair treads must always be completely glued to the underfloor. The most suitable glues are dual component polyurethanes or silicones.Vinyl or alcohol based glues normally used for traditional parquet are not recommended. • The step to be covered must be smooth and free of residue from glues used previously. Marble steps must be degreased or dewaxed to allow the glue to bond properly.• Before beginning installation, it is good practice to prepare the whole stair “dry”, then number each piece, and proceed to glue from top to bottom to avoid treading on the step just laid, which may cause it to move.• Use small wooden edges to keep the steps in position during laying.• Apply a generous but uniform amount of glue and do not forget the edges.• If you wish to continue laying Parqcolor®Flooring on the landing, the last step must not be glued to the underfloor, but must be click fitted into the planks for the floor.• PL supplies specific finishing profiles for lateral stair finishing.
60 61
GRUBOŚĆ 11,0 mm
188 142
330
PROMIEŃ 10 mm
50
308
73°+/- 2°
GRUBOŚĆ 8,0 mm
188 142
330
PROMIEŃ 10 mm
50
308
73°+/- 2°
GRUBOŚĆ 11,0 mm
188 142
330
PROMIEŃ 10 mm
50
308
73°+/- 2°
GRUBOŚĆ 8,0 mm
188 142
330
PROMIEŃ 10 mm
50
308
73°+/- 2°
DANE TECHNICZNE GRUBOŚĆ 11 / 8 mm
Metoda badań
Kryterium lub jednostka masy
Wartość wg normy Wynik
EN 13329:2006+A1 2008 Aneks E
EN 13329:2006+A1 2008 Aneks G
EN 425 w (EN 12529)
EN 424 z nogą typu 0
EN 13329:2006+A1 2008 Aneks F
EN 438:2005-2.26
EN 438:2005-2.27
EN 438:2005-2.30
EN 433
UNI EN 1815: 1999
EN 13501-1:2002
EN 61340:2004-4-1
Liczbaobrotów (IP)
Przyrost grubości %
Wygląd
Wygląd
Klasyfikacja IC
Kontrast
Zmiana
Zmiana
Euroklasa
Oporność międzydwoma punktami
≤ 18
Żadnych widocznych uszkodzeń
Żadnych widocznych uszkodzeń
≥ IC3
Klasyfikacjagrupy 1 i 2=5grupy 3 i 4≥4
Od 4 do 5 zgodnie z EN 20105-A02
Klasyfikacja≥4
Bez widocznych zmian≤ 0,01mm
8
Żadnych widocznych uszkodzeń
IC4
Klasa = 5Klasa > 4
>4
5
Bez widocznych zmian
≤ 2,0
Bfl-s1
109 ≤ Rp ≤1011
ohm (materiałantyelektrostatyczny)
Odporność na ścieranie
Pęcznienie grubości
Efekt oddziaływania krzeseł na kółkach
Efekt oddziaływania nóg mebli
Odporność na uderzenia
Odporność na za-plamienie
Trwałość koloru (lampa ksenon.)
Odporność na żar papierosa
Odporność na wgnie-cenia punktowe
Oporność elektryczna powierzchni
Właściwości antystatyczne
Reakcja na ogień
KV
AC 5 zgodnie z EN685:2007
≥6000 obrotów TaberaAC 5 ≥ 6000 obr.
tarczy Tabera
Żadnych widocznych uszkodzeń
Tabela zbiorcza klas użytkowych wg normy EN 13329
Klasa Symbol Poziom użytkowania Opis Ścieralność
21 Umiarkowany Słaby ruch pieszy AC1
PRZESTRZENIE MIESZKALNE
22 Przeciętny Średni ruch pieszy AC2
23 Podwyższony Intensywny ruch pieszy AC3
PRZESTRZENIE PUBLICZNE
31 Słaby ruch pieszy AC3
32 Średni ruch pieszy AC4
33 Intensywny ruch pieszy AC5
Umiarkowany
Przeciętny
Podwyższony
Dane techniczne: stopnice schodoweDane techniczne: stopnice schodowe
Wymiary stopnic: 33x5x116 cm – 33x5x176 cm – grubość 11 kg – waga 10,20 kg/m2 - opakowanie handlowe: po 3 szt. w kartonie. Inne wymiary na zamówienie, tylko dla podłóg o grubości 8 mm.Wymiary stopnic: 33x5x116 cm - grubość 8 mm- waga 8,00 kg/m2 - opakowanie handlowe: po 4 szt. w kartonie.
Parqcolor® stopnice
DANE TECHNICZNE GRUBOŚĆ 11 mmStopnice składają się z płyty rdzeniowej HDF (o gęstości powyżej 850 kg/m3) obłożonej z wierzchu dekoracyjnym laminatem Print HPL, a od spodu warstwą przeciwprężną również z laminatu Print HPL. Stopnice schodowe są zaginane metodą postformowania, zagięcie wypełniane jest poliuretenem o dużej gęstości dzięki czemu uzyskuje się trwały moduł stopnicy z noskiem.
Grubość 11 mm Klasa użytkowa wg normy EN 685:2007 i EN 13329:2006+A1:2008: 23 dla powierzchni mieszkalnych i 33 dla powierzchni publicznych (podwyższona) Odporność na ścieranie AC5 ≥ 6000 obrotów Tabera Odporność na uderzenia IC4 Antyelektrostatyczna Antypoślizgowość: klasa DS Emisja formaldehydu: klasa E1.
DANE TECHNICZNE GRUBOŚĆ 8 mmStopnice składają się z płyty rdzeniowej HDF (o gęstości powyżej 850 kg/m3) obłożonej z wierzchu dekoracyjnym laminatem Print HPL, a od spodu warstwą przeciwprężną również z laminatu Print HPL. Stopnice schodowe są zaginane metodą postformowania, zagięcie wypełniane jest poliuretenem o dużej gęstości dzięki czemu uzyskuje się trwały moduł stopnicy z noskiem.
Grubość 8 mm Klasa użytkowa wg normy EN 685:2007 i EN 13329:2006+A1:2008: 23 dla powierzchni mieszkalnych i 33 dla powierzchni publicznych (podwyższona) Odporność na ścieranie AC5 ≥ 6000 obrotów Tabera Odporność na uderzenia IC4 Antyelektrostatyczna Antypoślizgowość: klasa DS Emisja formaldehydu: klasa E1.
INSTRUKCJA UKŁADANIA STOPNIC SCHODOWYCH PARQCOLOR®
• Stopnice Parqcolor® muszą być całkowicie przyklejone do podłoża najlepiej za pomocą silikonowych lub poliuretanowych klejów dwuskładnikowych. Kleje winylowe lub na bazie alkoholi nie są zalecane. • Stopnie schodów muszą być wygładzone i wolne od wszelkich zanieczyszczeń. Stopnie marmurowe muszą być odtłuszczone, bez pozostałości wosków używanych do konserwacji.• Przed rozpoczęciem montażu stopnic, dobrze jest przygotować całość schodów „na sucho”, następnie ponumerować każdy element i przystąpić do montażu poczynając od najwyższego stopnia schodząc w dół schodów, aby uniknąć stąpania po stopniach dopiero co ułożonych, co mogłoby spowodować ich poruszenie się.• Używać klinów do mocowania stopnic przed związaniem kleju.• Nałożyć obfitą i jednolitą warstwę kleju, nie zapominając o krawędziach.• W przypadku okładania podestów klatki schodowej podłogą Parqcolor® nie należy kleić stopnicy do górnego stopnia tylko połączyć ją w systemie click z podłogą. • Do wykończeń bocznych schodów producent dostarcza specjalne profile wykończeniowe.
23
23
22
22
21
21
62 63
Parqcolor® How to installInstrukcja montażu
630 ELLERO WALNUT64 65
How to install Parqcolor®How to install Parqcolor®
Floating installationParqcolor® Click must not be glued. The longue-and-groove plank locking mechanism keeps it in position. To avoid any tension between planks, store packages for 48 hours in the room where Parqcolor® Click will be installed, after having removed the polyethylene protection. Store the boxes horizontally, leaving a gap between them. The relative humidity of the room must be between 40 and 60%. It is important to keep this relative humidity also after the flooring installation.
FLOOR CHECKING AND TREATINGIt is important that the sub-floor is even and flat. If particularly uneven, the floor, should be sanded or filled with appropriate levelling compounds. The floor must be completely dry (see table).
It is necessary to place a suitable underlay between Parqcolor® Click and the underlying floor. This will act as a “moisture barrier” and as sound insulation. It should be made of a closed-cell polyethylene foam and combined with a polyethylene sheet, with a total thickness of 2.20 mm (we recommend the use of PL’s polyethylene underlay Super Mousse).It is also possible to lay the laminate on carpet tiles. In this case is only necessary to insert a 0.12 mm polyethylene sheet which will acts as a moisture barrier: (we recommend to seal the polyethylene sheet with a double- sided adhesive tape). For laying the laminate on a floor heated with radiant panels, the following simple rules must be scrupulously observed.
1. The heating element must be inserted at least 30 mm into the floor.2. Before installing Parqcolor® Click, the heating system must be gradually brought un to maximum (with increments of 5°C per day) and kept at this temperature for 2 weeks. Before laying the laminate, gradually reduce the heating system temperature (5°C per day) before finally switching off, and check that the floor humidity falls within the values indicated in the table.3. Three days after laying the flooring switch the heating on again and bring the temperature gradually (with increments of 5°C per day) up to the required temperature.4. After laying the flooring, the temperature at floor level should never exceed 28°C.
REQUIRED EQUIPMENTCircular saw or alternatively a hacksaw, measuring tape, hammer, square, PVC or adjustable metal spacer, plank-shaped beater, L-shaped beater.
INSTALLATION- Before starting the installation, check that the packages are not damaged and that the material contained therein is exactly what was ordered.- To achieve the best appearance, it is advisable to lay the planks in the same direction as the light entering the room.- In narrow rooms, lay the planks longitudinally.- Parqcolor® Click moves like a wooden floor. We therefore recommend never to exceed 15 linear meters without using an expansion joint. A space at least 10 mm should be left between the floor and the wall or other obstacles (pillars, jambs, etc.). It is also important not to fix the planks with screws or nails. If it is necessary to fix the planks permanently, create a hole around the screw or nail to allow for floor expansion.- The information supplied here is drawn from the experience acquired by PL S.p.A. Because the company does not do installations, it will not be responsible for any claims regarding the laying of the flooring, except for claims dealing with the technical features of the product.
TIPS FOR THE PERFECT MAINTENANCE
DAILY CLEANING: Vacuum cleaner, broom or antistatic cloth.
REGULAR CLEANING: Mild detergent (non-abrasive domestic creamy detergents, ammonia, methylated spirit) mixed with water.The detergent Parqcolor® Cleaning is also available.NOTE: Always use a damp cloth, never wet.
DIFFICULT STAINS: Tar, ink, shoe polish, lipstick, nail polish, etc.: use a clean soft cloth moistened with nail-polish remover (acetone), methylated spirit or other domestic solvent.Chewing gum, candle wax, etc.: leave to get completely hard, then gently scrape it off.
DO NOT USEAbrasive sponges, abrasive detergent, floor waxes and polishes, soapy detergents, water in excess.
Cement floor
Cement floor with radiant panels
Anhydride
Anhydride with radiant panels
Magnesium, chipboard, cocrete
Wooden floor
Water repellent chipboard
MC
MC
MC
MC
Gann/Elettr.
Gann/Elettr.
Gann/Elettr.
2,50%
2,00%
0,50%
0,30%
7,00%
7,00 – 12,00%
6,00 – 9,00%
FLOOR METHOD MAX. HUMIDITYINDEX
MC: Magnesium Carbide
PARQCOLOR®
CLICK
COME INSTALLARE I PRODOTTI PARQCOLOR® CLICK
È MOLTO IMPORTANTE LEGGERE QUESTE ISTRUZIONI PRIMA DI INIZIARE LA POSA IN OPERA
1
5
6
7
8
9
2
3
4
MONTAGGIO FLOTTANTEParqcolor® Click non deve essereincollato. Rimane bloccato grazieall’incastro fra doga e doga. Per evita-re tensioni nelle doghe, le confezionidovranno essere tenute nell’ambientein cui andrà posato il Parqcolor ® Clickper 48 ore, rimuovendo la protezionein polietilene. Collocare le scatole inposizione orizzontale lasciandole dis-coste le une dalle altre. L’umidità rela-tiva del locale dovrà essere compresatra il 40 ed il 60 %. Tale livello di umi-dità è importante che sia mantenutaanche dopo la posa.
CONTROLLO E TRATTAMENTO DEL SOTTOFONDOÈ importante che i sottofondi sianoregolari e in piano. Ampie irregolaritàvanno corrette abradendole o riem-piendole con idonei materiali. I sotto-fondi devono essere perfettamenteasciutti (vedi tabella).
Sottofondo Metodo Indice massimodi umidità
massetto CM 2,50%cementiziomassetto CM 2,00%cementiziocon pannelli radiantianidride CM 0,50%anidride CM 0,30%con pannelli radiantimagnesio, Gann/Elettr. 7,00%truciolare,calcestruzzosottofondo Gann/Elettr. 7,00 - 12,00%in legnotruciolare Gann/Elettr. 6,00 - 9,00 %idrorepellente
È inoltre necessario interporre fraParqcolor ® Click e il sottofondo unmaterassino avente funzione di “bar-riera vapore” e isolamento acustico,composto da polietilene espanso acellula chiusa, accoppiato ad unfoglio di polietilene, di spessore totaledi 2,20 mm. (consigliamo l’utilizzo delnostro prodotto Super Mousse).È possibile effettuare la posa susottofondi in moquette a peloraso interponendo in questo casosolamente un foglio di polietileneda 0,12 mm come barriera vapo-re. Per la posa su sottofondo conriscaldamento a pannelli radiantiè necessario rispettare questesemplici norme:
1. La serpentina riscaldante deveessere ad una profondità di alme-no 30 mm nel massetto.
2. Prima dell’installazione delParqcolor ® Click l’impianto dovràessere portato gradatamente amassimo regime (5 gradi al gior-no) e mantenuto a tale tempera-tura per 2 settimane. Prima di ini-ziare la posa ridurre gradualmen-te la temperatura dell’impianto (5gradi al giorno) fino al totale spe-gnimento e controllare che l’umi-dità del massetto rientri nei valoririportati in tabella.
3. Tre giorni dopo la fine della posaaccendere nuovamente l’impian-to e portarlo gradatamente (5gradi al giorno) al regime d’eser-cizio richiesto.
4. La temperatura a terra dopo l’av-venuta installazione del pavi-mento non dovrà mai superare i28° C.
ATTREZZATURA NECESSARIASega circolare o seghetto alternativo,metro, martello, squadretta, distan-ziatori in PVC o regolabili in metallo,battitore sagomato, battitore a L.
INSTALLAZIONE- Prima di cominciare l’installazione
verificare l’integrità degli imballi eche il materiale rispetti le specifi-che di fornitura.
- Per ottenere un buon risultatoestetico, si consiglia di posare ledoghe rivolte nella stessa direzio-ne di entrata della luce nei locali.
- Nei locali stretti applicare le doghein senso longitudinale.
- Parqcolor ® Click si muove comeun pavimento in legno; è pertantoconsigliabile non superare mai gli8 ml. (15 per Vintage Collection)senza l’utilizzo di un giunto di dila-tazione. Lasciare uno spazio tra ilpavimento e la parete o altri osta-coli (colonne, stipiti, ecc.) dialmento 8 mm (15 mm perVintage Collection). È importantenon bloccare le doghe con viti ochiodi; se un fissaggio permanen-
te è indispensabile, creare un’aso-la intorno alla vite o chiodo perpermettere la dilatazione del pavi-mento.
- Le informazioni qui elencate sonoconseguenza dell’esperienzadella PL s.p.a. la quale, non par-tecipando alla messa in opera,non è responsabile di eventualicontestazioni sulla posa del mate-riale, fatte salve le caratteristichetecniche del prodotto.
INDICAZIONI PER UNA PERFETTA MANUTENZIONE
PULIZIA GIORNALIERAAspirapolvere, scopa o panno anti-statico.
PULIZIA PERIODICA- Detergente blando (domestici cre-
mosi non abrasivi, ammoniaca,alcol) disciolto in acqua.È inoltre disponibile il pulitoreParqcolor ® Cleaning.
IMPORTANTE: utilizzare sempre un panno ben strizzato.
MACCHIE DIFFICILI- Catrame, inchiostro, lucidi, ros-
setti, smalti, ecc..: utilizzare unpanno morbido pulito, imbevutodi acetone, alcol o altro solventedomestico.
- Gomma da masticare, cera dicandela, ecc.: lasciar indurirecompletamente e poi raschiarevia delicatamente.
COSA NON UTILIZZARE- Spugne abrasive- Detergenti abrasivi- Cere e lucidi per pavimenti- Detergenti saponati- Acqua in eccesso.
HOW TO INSTALL PARQCOLOR ® CLICK
IT IS EXTREMELY IMPORTANT TO READ THESE INSTRUCTIONS BEFORE LAYING THE FLOORING
FLOATING INSTALLATIONParqcolor ® Click must not be glued.The longue-and-groove plank lockingmechanism keeps it in position. Toavoid any tension between planks,store packages for 48 hours in theroom where Parqcolor ® Click will beinstalled, after having removed thepolyethylene protection. Store theboxes horizontally, leaving a gapbetween them. The relative humidityof the room must be between 40 and60%. It is important to keep thisrelative humidity also after the flooringinstallation.
FLOOR CHECKING AND TREATINGIt is important that the sub-floor iseven and flat. If particularly uneven,the floor should be sanded or filledwith appropriate levellingcompounds. The floor must becompletely dry (see table).
Floor Method Max. humidityindex
Cement floor MC 2,50%
Cement floor MC 2,00%with radiantpanels
Anhydride MC 0,50%
Anhydride MC 0,30%with radiantpanels
Magnesium, Gann/Electr. 7,00%chipboard,concrete
Wooden floor Gann/Electr. 7,00 - 12,00%
Water Gann/Electr. 6,00 - 9,00%repellentchipboard
MC: Magnesium carbide
It is necessary to place a suitableunderlay between Parqcolor ® Clickand the underlying floor. This will actas a “moisture barrier” and as soundinsulation. It should be made of aclosed-cell polyethylene foam andcombined with a polyethylene sheet,with a total thickness of 2.20 mm (werecommend the use of PL’spolyethylene underlay SuperMousse).It is also possible to lay the laminateon carpet tiles. In this case it is onlynecessary to insert a 0.12 mmpolyethylene sheet which will act as amoisture barrier. For laying thelaminate on a floor heated withradiant panels, the following simplerules must be scrupulously observed.
1. The heating element must beinserted at least 30 mm into thefloor.
2. Before installing Parqcolor ® Click,the heating system must be
gradually brought up to maximum(with increments of 5°C per day)and kept at this temperature for 2weeks. Before laying the laminate,gradually reduce the heatingsystem temperature (5°C per day)before finally switching off, andcheck that the floor humidity fallswithin the values indicated in thetable.
3. Three days after laying the flooring,switch the heating on again andbring the temperature gradually(with increments of 5° C per day)up to the required temperature.
4. After laying the flooring,temperature at floor level shouldnever exceed 28°C.
REQUIRED EQUIPMENTCircular saw or alternatively ahacksaw, measuring tape, hammer,square, PVC or adjustable metalspacers, plank-shaped beater.L-shaped beater.
INSTALLATION- Before starting the installation,
check that the packages are notdamaged and that the materialcontained therein is exactly whatwas ordered.
- To achieve the best appearance, itis advisable to lay the planks in thesame direction as the light enteringthe room.
- In narrow rooms, lay the plankslongitudinally.
- Parqcolor® Click moves like awooden floor. We thereforerecommend never to exceed 8linear metres (315 1/16 in and 15lm for the Vintage Collectionrange) without using an expansionjoint. A space of at least 8 mm(5/16 in) should be left between thefloor and the wall or other obstacles(pillars, jambs, etc. and 15 mm forthe Vintage Collection range). It isalso important not to fix the plankswith screws or nails. If it isnecessary to fix the plankspermanently, create a hole aroundthe screw or nail to allow for floorexpansion.
- The information supplied here isdrawn from the experienceacquired by PL S.p.A. Because thecompany does not do installations,it will not be responsible for anyclaims regarding the laying of theflooring, except for claims dealing
with the technical features of theproduct.
TIPS FOR PERFECT MAINTENANCE
DAILY CLEANINGVacuum cleaner, broom or antistaticcloth.
REGULAR CLEANING- Mild detergent (non-abrasive
domestic creamy detergents,ammonia, methylated spirit) mixedwith water.The detergent Parqcolor® Cleaningis also available.
NOTE:Always use a damp cloth, never wet.
DIFFICULT STAINS- Tar, ink, shoe polish, lipstick, nail
polish, etc.: use a clean soft clothmoistened with nail-polish remover(acetone), methylated spirit or otherdomestic solvent.
- Chewing gum, candle wax, etc.:leave to get completely hard, thengently scrape it off.
DO NOT USE:- Abrasive sponges, abrasive
detergents, floor waxes andpolishes, soapy detergents, water inexcess.
Do not lay Parqcolor ® Click directly onthe existing floor and always makesure that the under floor is clean,smooth and dry. Insulate with asuitable underlay (we recommendour Super Mousse). Overlay theedges of adjacent sheets, sealing withsilicone or water-repellent tape. Makesure that the mat overlaps the wallsby at least 3 cm (1 2/16 in).
Place the first plank starting from leftto right, with the tongued edge facingthe wall, after having removed theprojecting HDF part. Insert thespacers to create an expansion gap.The planks must be fixed together,raising them of about 30°.
1
To place the second plank, insert firstthe short side (see photo no. 2), theninsert the long side, raising slightly therow. (or insert first the long side andthen embed the short side by thebeater).
5
Place the closing plank, previouslycut to size, leaving an expansion gap,eventually with the help of theL-shaped beater. (see photo no. 3).
6
To cut the planks, use a hacksawand always leave the appropriateexpansion gaps.
7
To obtain best results when layingParqcolor ® Click, cut door jambs witha graduated circular saw so as tocreate the space needed to insert theplanks.
8
For surfaces with sides over 8 linearmetres (315 1/16 in), and 15 lm forthe Vintage Collection suitableexpansion joints must be used toallow for the natural movement of theproduct. CAUTION: The floors of adjoining rooms, corridors, lounges, etc. mustbe separated by expansion joints.
9
2
To cut to size the final plank of eachrow, place it in such a way thangrooved edges are facing each other.For its insertion, use the L-shapedbeater. The remaining part of theplank will be used as the startingplank for the following row. Makesure that planks are staggered by atleast 30 cm (11 12/16 in).
3
To start the second row, insert theremaining plank, inclining it of about30°.
4
No colocar el Parqcolor ® Clickdirectamente sobre el cimiento yasegurarse siempre de que estélimpio, liso y seco. Aislar con unacolchoneta adecuada (se aconseja eluso de la nuestra Super Mousse).Superponer la tela sobre lo quesobresale de la anterior, precintandocon silicona o cinta hidrorepelente. La colchoneta debe doblarse sobre lasparedes al menos 3 cm.
Posicionar la primera lamaempezando de izquierda a derecha,con el lado trabajado, dirigiendo elmacho hacia el muro, despuès dehaber quitado la parte que sobresalede MDF, insertar los distanciadorespara crear espacios de dilataciòn.Las lamas se encajan entre ellasInclinàndolas a 30° aproximada -mente.
1
Para posicionar la segunda Lamainsertar primero el lado corto (ver foto2) Insertar el lado mas largolevantando ligeramente la fila, oinsertar primero el lado largo, acontinuaciòn, con el batidorencajado el lado corto.
5
Posicionar la lama de cierre anteriorcortada a medida, teniendo encuenta el espacio de dilataciòn. Encaso necesario, ayudarse con elbatidor a L. (ver foto 3)
6
Para efectuar cortes internos en las lamas utilizar un serrucho alternativo, dejando siempre los oportunosespacios de dilatación.
7
Para una mejor calidad de la puesta en obra del Parqcolor® Click esnecesario cortar los montantes delas puertas, utilizando una sierracircular graduada, con el fin de crearel espacio para la inserción de laslamas.
8
Para superficies con lados que superenlos 8 metros lineales, 15 ml gamaVintage Collection hay que prever unasjuntas de dilatación apropiadas quepuedan permitir el movimiento naturaldel producto. ATENCIÓN: en ambientescontiguos (dormitorios, pasillos, salones,etc.…) interrumpir obligatoriamente aproximidad de las puertas decomunicación entre los locales.
9
2
Para medir la lama terminal de cadafila, posicionarla de forma que laspartes hembra, resultencontrapuestas, para insertarlasayudarse con un batidor a L. La parteque queda serà utilizada comoempiece para la fila sucesiva;asegurarse que las lamas estèndesviadas entre ellas 30 cm comominimo.
3
Iniciar la segunda fila insertando lalama sucesiva inclinàndola 30°aproximadamente.
4
PL S.p.A.22070 VERTEMATE (CO) Strada per Bulgorello, 3Tel. 031/888.211 - Fax 031/901053
www.parqcolor.come-mail: [email protected]
EN 14041
I C I L AAzienda con sistema qualità
UNI EN ISO 9001:2000 Certificato N° 69
COMO INSTALAR PARQCOLOR® CLICK
ES MUY IMPORTANTE LEER ESTAS INSTRUCCIONES ANTES DE INICIAR LA COLOCACIÓN EN OBRA
MONTAJE FLOTANTEParqcolor® Click no se debe encolaren el suelo. Permanece bloqueadopor el encaje entre lama y lama. Paraevitar tensiones en las lamas, lospaquetes contenedores del materialdeberán permanecer en el ambienteen el que vaya a ser colocado elParqcolor® Click durante 48 horas,quitando la protección de polietileno.Colocar las cajas en posiciónhorizontal dejándolas separadas lasunas de las otras. La humedadrelativa del local deberá ser de entre40 y 60 %. Tal nivel de humedad esimportante que se mantengadespuès de la colocaciòn.
CONTROL Y TRATAMIENTO DE LOS CIMIENTOSEs importante que los cimientos sean regulares y estén nivelados. Se deben corregir las irregularidades grandesraspándolas o rellenándolas conmateriales adecuados. Los cimientosdeben estar perfectamente secos (ver tabla).
Cimiento Método Indice máximode humedad
Bloque CM 2,50%de cemento
Bloque CM 2,00%de cementocon panelesradiantes
Anhídrido CM 0,50%
Anhídrido CM 0,30%con panelesradiantes
Magnesio, Gann/Electr. 7,00%viruta,hormigón
Cimiento Gann/Electr. 7,00 - 12,00%de madera
Viruta Gann/Electr. 6,00 - 9,00 %hidrorepelente
CM: Carburo Magnesio
Además es necesario insertar entre el Parqcolor® Click y el cimiento unacolchoneta que haga la función de“barrera vapor” y aislamiento acústicoformada por polietileno expandidocon célula cerrada, acoplado con unfolio de polietileno, con un espesortotal de 2,20 mm (aconsejamos lautilización de nuestro producto SuperMousse).Es posible efectuar la colocaciónsobre cimientos de moqueta de peloraso (bucle) insertando en este casosolamente una lámina de polietilenode 0,12 mm como barrera vapor.Para la colocación sobre cimientoscon calefacción de paneles radiantes es necesario respetar estas sencillasnormas:
1. La serpentina que calienta debeestar a una profundidad de almenos 30 mm en el bloque.
2. Antes de la instalación delParqcolor® Click, la calefacción sedeberá elevar gradualmente almáximo régimen (5 °C al día) ymantener a dicha temperaturadurante 2 semanas. Antes deiniciar la colocación, reducirgradualmente la temperatura de lainstalación (5 °C al día) hastaapagarla totalmente y controlarque la humedad del bloque estédentro de los valores indicados enla tabla.
3. Tres días después de acabar lacolocación, encender nuevamentela calefacción y elevarlagradualmente (5 °C al día) segúnlas necesidades.
4. La temperatura del suelo, tras lainstalación del pavimento, nodeberá nunca superar los 28° C.
EQUIPO NECESARIOSierra circular o serrucho alternativo,metro, martillo, escuadra,distanciadores de PVC o ajustablesde metal, batidor perfilado y batidoraa L.
INSTALACIÓN- Antes de empezar la instalación
comprobar la integridad de losembalajes y que el material respetelas especificaciones del suministro.
- Para obtener un buen resultadoestético, se aconseja poner laslamas orientadas en la mismadirección de la entrada de luz de loslocales.
- En los locales estrechos colocar laslamas en sentido longitudinal.
- El Parqcolor® Click se mueve comoun pavimento en madera; es por loanto aconsejable no superar nuncalos 8 metros lineales y 15 ml para lagama Vintage sin la utilización deuna junta de dilatación. Dejar unespacio entre el pavimento y lapared u otros obstáculos(columnas, montantes, etc.) de 8mm como mínimo y 15 mm para lagama Vintage. Es importante nobloquear las lamas con tornillos oclavos; si es necesaria una fijaciónpermanente, crear una ranuraalrededor del tornillo o clavo parapermitir la dilatación del pavimento.
- La información que se indica es elresultado de la experiencia de la PLs.p.a. aunque, al no participar en lapuesta en obra, no seráresponsable de eventualidades enrelación con la colocación delmaterial, a excepción de lascaracterísticas técnicas delproducto.
INDICACIONES PARA UNPERFECTO MANTENIMIENTO
LIMPIEZA DIARIAAspirador, escoba o paño antiestático
LIMPIEZA PERIÓDICA- Detergente blando (domésticos
cremosos no abrasivos, amoniaco,alcohol) disueltos en agua.Además está disponible ellimpiador Parqcolor® Cleaning.
IMPORTANTE: utilizar siempre un paño bien escurrido.
MANCHAS DIFÍCILES- Alquitrán, tinta, abrillantadores,
pinta labios, esmaltes, etc.: utilizarun paño suave limpio, empapadode acetona, alcohol u otro disolventedoméstico.
- Goma de mascar, cera de vela, etc.:dejar endurecer completamente yluego raspar delicadamente.
LO QUE NO SE DEBE UTILIZAR- Esponjas abrasivas- Detergentes abrasivos- Ceras y abrillantadores para
pavimentos- Detergentes jabonosos- Agua en exceso.
66 67
Cementowe
Cementowe z instalacją grzewczą
Gipsowe
Gipsowe z instalacją grzewczą
Magnezowe, płyta wiórowa, beton
Drewniane
Płyta wiórowa wodo-odporna
MC
MC
MC
MC
Gann/Elettr.
Gann/Elettr.
Gann/Elettr.
2,50%
2,00%
0,50%
0,30%
7,00%
7,00 – 12,00%
6,00 – 9,00%
PODŁOŻE METODADOPUSZCZALNY PO-ZIOM WILGOTNOŚCI
PARQCOLOR®
CLICK
COME INSTALLARE I PRODOTTI PARQCOLOR® CLICK
È MOLTO IMPORTANTE LEGGERE QUESTE ISTRUZIONI PRIMA DI INIZIARE LA POSA IN OPERA
1
5
6
7
8
9
2
3
4
MONTAGGIO FLOTTANTEParqcolor® Click non deve essereincollato. Rimane bloccato grazieall’incastro fra doga e doga. Per evita-re tensioni nelle doghe, le confezionidovranno essere tenute nell’ambientein cui andrà posato il Parqcolor ® Clickper 48 ore, rimuovendo la protezionein polietilene. Collocare le scatole inposizione orizzontale lasciandole dis-coste le une dalle altre. L’umidità rela-tiva del locale dovrà essere compresatra il 40 ed il 60 %. Tale livello di umi-dità è importante che sia mantenutaanche dopo la posa.
CONTROLLO E TRATTAMENTO DEL SOTTOFONDOÈ importante che i sottofondi sianoregolari e in piano. Ampie irregolaritàvanno corrette abradendole o riem-piendole con idonei materiali. I sotto-fondi devono essere perfettamenteasciutti (vedi tabella).
Sottofondo Metodo Indice massimodi umidità
massetto CM 2,50%cementiziomassetto CM 2,00%cementiziocon pannelli radiantianidride CM 0,50%anidride CM 0,30%con pannelli radiantimagnesio, Gann/Elettr. 7,00%truciolare,calcestruzzosottofondo Gann/Elettr. 7,00 - 12,00%in legnotruciolare Gann/Elettr. 6,00 - 9,00 %idrorepellente
È inoltre necessario interporre fraParqcolor ® Click e il sottofondo unmaterassino avente funzione di “bar-riera vapore” e isolamento acustico,composto da polietilene espanso acellula chiusa, accoppiato ad unfoglio di polietilene, di spessore totaledi 2,20 mm. (consigliamo l’utilizzo delnostro prodotto Super Mousse).È possibile effettuare la posa susottofondi in moquette a peloraso interponendo in questo casosolamente un foglio di polietileneda 0,12 mm come barriera vapo-re. Per la posa su sottofondo conriscaldamento a pannelli radiantiè necessario rispettare questesemplici norme:
1. La serpentina riscaldante deveessere ad una profondità di alme-no 30 mm nel massetto.
2. Prima dell’installazione delParqcolor ® Click l’impianto dovràessere portato gradatamente amassimo regime (5 gradi al gior-no) e mantenuto a tale tempera-tura per 2 settimane. Prima di ini-ziare la posa ridurre gradualmen-te la temperatura dell’impianto (5gradi al giorno) fino al totale spe-gnimento e controllare che l’umi-dità del massetto rientri nei valoririportati in tabella.
3. Tre giorni dopo la fine della posaaccendere nuovamente l’impian-to e portarlo gradatamente (5gradi al giorno) al regime d’eser-cizio richiesto.
4. La temperatura a terra dopo l’av-venuta installazione del pavi-mento non dovrà mai superare i28° C.
ATTREZZATURA NECESSARIASega circolare o seghetto alternativo,metro, martello, squadretta, distan-ziatori in PVC o regolabili in metallo,battitore sagomato, battitore a L.
INSTALLAZIONE- Prima di cominciare l’installazione
verificare l’integrità degli imballi eche il materiale rispetti le specifi-che di fornitura.
- Per ottenere un buon risultatoestetico, si consiglia di posare ledoghe rivolte nella stessa direzio-ne di entrata della luce nei locali.
- Nei locali stretti applicare le doghein senso longitudinale.
- Parqcolor ® Click si muove comeun pavimento in legno; è pertantoconsigliabile non superare mai gli8 ml. (15 per Vintage Collection)senza l’utilizzo di un giunto di dila-tazione. Lasciare uno spazio tra ilpavimento e la parete o altri osta-coli (colonne, stipiti, ecc.) dialmento 8 mm (15 mm perVintage Collection). È importantenon bloccare le doghe con viti ochiodi; se un fissaggio permanen-
te è indispensabile, creare un’aso-la intorno alla vite o chiodo perpermettere la dilatazione del pavi-mento.
- Le informazioni qui elencate sonoconseguenza dell’esperienzadella PL s.p.a. la quale, non par-tecipando alla messa in opera,non è responsabile di eventualicontestazioni sulla posa del mate-riale, fatte salve le caratteristichetecniche del prodotto.
INDICAZIONI PER UNA PERFETTA MANUTENZIONE
PULIZIA GIORNALIERAAspirapolvere, scopa o panno anti-statico.
PULIZIA PERIODICA- Detergente blando (domestici cre-
mosi non abrasivi, ammoniaca,alcol) disciolto in acqua.È inoltre disponibile il pulitoreParqcolor ® Cleaning.
IMPORTANTE: utilizzare sempre un panno ben strizzato.
MACCHIE DIFFICILI- Catrame, inchiostro, lucidi, ros-
setti, smalti, ecc..: utilizzare unpanno morbido pulito, imbevutodi acetone, alcol o altro solventedomestico.
- Gomma da masticare, cera dicandela, ecc.: lasciar indurirecompletamente e poi raschiarevia delicatamente.
COSA NON UTILIZZARE- Spugne abrasive- Detergenti abrasivi- Cere e lucidi per pavimenti- Detergenti saponati- Acqua in eccesso.
HOW TO INSTALL PARQCOLOR ® CLICK
IT IS EXTREMELY IMPORTANT TO READ THESE INSTRUCTIONS BEFORE LAYING THE FLOORING
FLOATING INSTALLATIONParqcolor ® Click must not be glued.The longue-and-groove plank lockingmechanism keeps it in position. Toavoid any tension between planks,store packages for 48 hours in theroom where Parqcolor ® Click will beinstalled, after having removed thepolyethylene protection. Store theboxes horizontally, leaving a gapbetween them. The relative humidityof the room must be between 40 and60%. It is important to keep thisrelative humidity also after the flooringinstallation.
FLOOR CHECKING AND TREATINGIt is important that the sub-floor iseven and flat. If particularly uneven,the floor should be sanded or filledwith appropriate levellingcompounds. The floor must becompletely dry (see table).
Floor Method Max. humidityindex
Cement floor MC 2,50%
Cement floor MC 2,00%with radiantpanels
Anhydride MC 0,50%
Anhydride MC 0,30%with radiantpanels
Magnesium, Gann/Electr. 7,00%chipboard,concrete
Wooden floor Gann/Electr. 7,00 - 12,00%
Water Gann/Electr. 6,00 - 9,00%repellentchipboard
MC: Magnesium carbide
It is necessary to place a suitableunderlay between Parqcolor ® Clickand the underlying floor. This will actas a “moisture barrier” and as soundinsulation. It should be made of aclosed-cell polyethylene foam andcombined with a polyethylene sheet,with a total thickness of 2.20 mm (werecommend the use of PL’spolyethylene underlay SuperMousse).It is also possible to lay the laminateon carpet tiles. In this case it is onlynecessary to insert a 0.12 mmpolyethylene sheet which will act as amoisture barrier. For laying thelaminate on a floor heated withradiant panels, the following simplerules must be scrupulously observed.
1. The heating element must beinserted at least 30 mm into thefloor.
2. Before installing Parqcolor ® Click,the heating system must be
gradually brought up to maximum(with increments of 5°C per day)and kept at this temperature for 2weeks. Before laying the laminate,gradually reduce the heatingsystem temperature (5°C per day)before finally switching off, andcheck that the floor humidity fallswithin the values indicated in thetable.
3. Three days after laying the flooring,switch the heating on again andbring the temperature gradually(with increments of 5° C per day)up to the required temperature.
4. After laying the flooring,temperature at floor level shouldnever exceed 28°C.
REQUIRED EQUIPMENTCircular saw or alternatively ahacksaw, measuring tape, hammer,square, PVC or adjustable metalspacers, plank-shaped beater.L-shaped beater.
INSTALLATION- Before starting the installation,
check that the packages are notdamaged and that the materialcontained therein is exactly whatwas ordered.
- To achieve the best appearance, itis advisable to lay the planks in thesame direction as the light enteringthe room.
- In narrow rooms, lay the plankslongitudinally.
- Parqcolor® Click moves like awooden floor. We thereforerecommend never to exceed 8linear metres (315 1/16 in and 15lm for the Vintage Collectionrange) without using an expansionjoint. A space of at least 8 mm(5/16 in) should be left between thefloor and the wall or other obstacles(pillars, jambs, etc. and 15 mm forthe Vintage Collection range). It isalso important not to fix the plankswith screws or nails. If it isnecessary to fix the plankspermanently, create a hole aroundthe screw or nail to allow for floorexpansion.
- The information supplied here isdrawn from the experienceacquired by PL S.p.A. Because thecompany does not do installations,it will not be responsible for anyclaims regarding the laying of theflooring, except for claims dealing
with the technical features of theproduct.
TIPS FOR PERFECT MAINTENANCE
DAILY CLEANINGVacuum cleaner, broom or antistaticcloth.
REGULAR CLEANING- Mild detergent (non-abrasive
domestic creamy detergents,ammonia, methylated spirit) mixedwith water.The detergent Parqcolor® Cleaningis also available.
NOTE:Always use a damp cloth, never wet.
DIFFICULT STAINS- Tar, ink, shoe polish, lipstick, nail
polish, etc.: use a clean soft clothmoistened with nail-polish remover(acetone), methylated spirit or otherdomestic solvent.
- Chewing gum, candle wax, etc.:leave to get completely hard, thengently scrape it off.
DO NOT USE:- Abrasive sponges, abrasive
detergents, floor waxes andpolishes, soapy detergents, water inexcess.
Do not lay Parqcolor ® Click directly onthe existing floor and always makesure that the under floor is clean,smooth and dry. Insulate with asuitable underlay (we recommendour Super Mousse). Overlay theedges of adjacent sheets, sealing withsilicone or water-repellent tape. Makesure that the mat overlaps the wallsby at least 3 cm (1 2/16 in).
Place the first plank starting from leftto right, with the tongued edge facingthe wall, after having removed theprojecting HDF part. Insert thespacers to create an expansion gap.The planks must be fixed together,raising them of about 30°.
1
To place the second plank, insert firstthe short side (see photo no. 2), theninsert the long side, raising slightly therow. (or insert first the long side andthen embed the short side by thebeater).
5
Place the closing plank, previouslycut to size, leaving an expansion gap,eventually with the help of theL-shaped beater. (see photo no. 3).
6
To cut the planks, use a hacksawand always leave the appropriateexpansion gaps.
7
To obtain best results when layingParqcolor ® Click, cut door jambs witha graduated circular saw so as tocreate the space needed to insert theplanks.
8
For surfaces with sides over 8 linearmetres (315 1/16 in), and 15 lm forthe Vintage Collection suitableexpansion joints must be used toallow for the natural movement of theproduct. CAUTION: The floors of adjoining rooms, corridors, lounges, etc. mustbe separated by expansion joints.
9
2
To cut to size the final plank of eachrow, place it in such a way thangrooved edges are facing each other.For its insertion, use the L-shapedbeater. The remaining part of theplank will be used as the startingplank for the following row. Makesure that planks are staggered by atleast 30 cm (11 12/16 in).
3
To start the second row, insert theremaining plank, inclining it of about30°.
4
No colocar el Parqcolor ® Clickdirectamente sobre el cimiento yasegurarse siempre de que estélimpio, liso y seco. Aislar con unacolchoneta adecuada (se aconseja eluso de la nuestra Super Mousse).Superponer la tela sobre lo quesobresale de la anterior, precintandocon silicona o cinta hidrorepelente. La colchoneta debe doblarse sobre lasparedes al menos 3 cm.
Posicionar la primera lamaempezando de izquierda a derecha,con el lado trabajado, dirigiendo elmacho hacia el muro, despuès dehaber quitado la parte que sobresalede MDF, insertar los distanciadorespara crear espacios de dilataciòn.Las lamas se encajan entre ellasInclinàndolas a 30° aproximada -mente.
1
Para posicionar la segunda Lamainsertar primero el lado corto (ver foto2) Insertar el lado mas largolevantando ligeramente la fila, oinsertar primero el lado largo, acontinuaciòn, con el batidorencajado el lado corto.
5
Posicionar la lama de cierre anteriorcortada a medida, teniendo encuenta el espacio de dilataciòn. Encaso necesario, ayudarse con elbatidor a L. (ver foto 3)
6
Para efectuar cortes internos en las lamas utilizar un serrucho alternativo, dejando siempre los oportunosespacios de dilatación.
7
Para una mejor calidad de la puesta en obra del Parqcolor® Click esnecesario cortar los montantes delas puertas, utilizando una sierracircular graduada, con el fin de crearel espacio para la inserción de laslamas.
8
Para superficies con lados que superenlos 8 metros lineales, 15 ml gamaVintage Collection hay que prever unasjuntas de dilatación apropiadas quepuedan permitir el movimiento naturaldel producto. ATENCIÓN: en ambientescontiguos (dormitorios, pasillos, salones,etc.…) interrumpir obligatoriamente aproximidad de las puertas decomunicación entre los locales.
9
2
Para medir la lama terminal de cadafila, posicionarla de forma que laspartes hembra, resultencontrapuestas, para insertarlasayudarse con un batidor a L. La parteque queda serà utilizada comoempiece para la fila sucesiva;asegurarse que las lamas estèndesviadas entre ellas 30 cm comominimo.
3
Iniciar la segunda fila insertando lalama sucesiva inclinàndola 30°aproximadamente.
4
PL S.p.A.22070 VERTEMATE (CO) Strada per Bulgorello, 3Tel. 031/888.211 - Fax 031/901053
www.parqcolor.come-mail: [email protected]
EN 14041
I C I L AAzienda con sistema qualità
UNI EN ISO 9001:2000 Certificato N° 69
COMO INSTALAR PARQCOLOR® CLICK
ES MUY IMPORTANTE LEER ESTAS INSTRUCCIONES ANTES DE INICIAR LA COLOCACIÓN EN OBRA
MONTAJE FLOTANTEParqcolor® Click no se debe encolaren el suelo. Permanece bloqueadopor el encaje entre lama y lama. Paraevitar tensiones en las lamas, lospaquetes contenedores del materialdeberán permanecer en el ambienteen el que vaya a ser colocado elParqcolor® Click durante 48 horas,quitando la protección de polietileno.Colocar las cajas en posiciónhorizontal dejándolas separadas lasunas de las otras. La humedadrelativa del local deberá ser de entre40 y 60 %. Tal nivel de humedad esimportante que se mantengadespuès de la colocaciòn.
CONTROL Y TRATAMIENTO DE LOS CIMIENTOSEs importante que los cimientos sean regulares y estén nivelados. Se deben corregir las irregularidades grandesraspándolas o rellenándolas conmateriales adecuados. Los cimientosdeben estar perfectamente secos (ver tabla).
Cimiento Método Indice máximode humedad
Bloque CM 2,50%de cemento
Bloque CM 2,00%de cementocon panelesradiantes
Anhídrido CM 0,50%
Anhídrido CM 0,30%con panelesradiantes
Magnesio, Gann/Electr. 7,00%viruta,hormigón
Cimiento Gann/Electr. 7,00 - 12,00%de madera
Viruta Gann/Electr. 6,00 - 9,00 %hidrorepelente
CM: Carburo Magnesio
Además es necesario insertar entre el Parqcolor® Click y el cimiento unacolchoneta que haga la función de“barrera vapor” y aislamiento acústicoformada por polietileno expandidocon célula cerrada, acoplado con unfolio de polietileno, con un espesortotal de 2,20 mm (aconsejamos lautilización de nuestro producto SuperMousse).Es posible efectuar la colocaciónsobre cimientos de moqueta de peloraso (bucle) insertando en este casosolamente una lámina de polietilenode 0,12 mm como barrera vapor.Para la colocación sobre cimientoscon calefacción de paneles radiantes es necesario respetar estas sencillasnormas:
1. La serpentina que calienta debeestar a una profundidad de almenos 30 mm en el bloque.
2. Antes de la instalación delParqcolor® Click, la calefacción sedeberá elevar gradualmente almáximo régimen (5 °C al día) ymantener a dicha temperaturadurante 2 semanas. Antes deiniciar la colocación, reducirgradualmente la temperatura de lainstalación (5 °C al día) hastaapagarla totalmente y controlarque la humedad del bloque estédentro de los valores indicados enla tabla.
3. Tres días después de acabar lacolocación, encender nuevamentela calefacción y elevarlagradualmente (5 °C al día) segúnlas necesidades.
4. La temperatura del suelo, tras lainstalación del pavimento, nodeberá nunca superar los 28° C.
EQUIPO NECESARIOSierra circular o serrucho alternativo,metro, martillo, escuadra,distanciadores de PVC o ajustablesde metal, batidor perfilado y batidoraa L.
INSTALACIÓN- Antes de empezar la instalación
comprobar la integridad de losembalajes y que el material respetelas especificaciones del suministro.
- Para obtener un buen resultadoestético, se aconseja poner laslamas orientadas en la mismadirección de la entrada de luz de loslocales.
- En los locales estrechos colocar laslamas en sentido longitudinal.
- El Parqcolor® Click se mueve comoun pavimento en madera; es por loanto aconsejable no superar nuncalos 8 metros lineales y 15 ml para lagama Vintage sin la utilización deuna junta de dilatación. Dejar unespacio entre el pavimento y lapared u otros obstáculos(columnas, montantes, etc.) de 8mm como mínimo y 15 mm para lagama Vintage. Es importante nobloquear las lamas con tornillos oclavos; si es necesaria una fijaciónpermanente, crear una ranuraalrededor del tornillo o clavo parapermitir la dilatación del pavimento.
- La información que se indica es elresultado de la experiencia de la PLs.p.a. aunque, al no participar en lapuesta en obra, no seráresponsable de eventualidades enrelación con la colocación delmaterial, a excepción de lascaracterísticas técnicas delproducto.
INDICACIONES PARA UNPERFECTO MANTENIMIENTO
LIMPIEZA DIARIAAspirador, escoba o paño antiestático
LIMPIEZA PERIÓDICA- Detergente blando (domésticos
cremosos no abrasivos, amoniaco,alcohol) disueltos en agua.Además está disponible ellimpiador Parqcolor® Cleaning.
IMPORTANTE: utilizar siempre un paño bien escurrido.
MANCHAS DIFÍCILES- Alquitrán, tinta, abrillantadores,
pinta labios, esmaltes, etc.: utilizarun paño suave limpio, empapadode acetona, alcohol u otro disolventedoméstico.
- Goma de mascar, cera de vela, etc.:dejar endurecer completamente yluego raspar delicadamente.
LO QUE NO SE DEBE UTILIZAR- Esponjas abrasivas- Detergentes abrasivos- Ceras y abrillantadores para
pavimentos- Detergentes jabonosos- Agua en exceso.
Instrukcja montażu Parqcolor®Instrukcja montażu Parqcolor®
Instrukcja montażu podłogi pływającejPodłóg Parqcolor® Click nie należy kleić do podłoża. Poszczególne deski są unieruchamiane poprzez mechanizm zatrzaskowy pióro-wpust. Aby uniknąć naprężeń między deskami należy je klimatyzować przez 48 godzin w pomieszczeniu w którym będą układane, usuwając z nich uprzednio polietylenową folię ochronną. Pudła z deskami należy ułożyć poziomo w sztaplach, zachowując odstęp między sztaplami. Wilgotność względna w pomieszczeniu powinna wynosić pomiędzy 40%, a 60%. Ważne jest utrzymanie takiej samej wilgotności względnej również po ułożeniu podłogi.
KONTROLA i PRZYGOTOWANIE PODŁOŻAPodłoże musi być płaskie i suche. Duże nierówności należy zeszlifować lub alternatywnie wypełnić odpowiednim materiałem. Podłoże musi być absolutnie suche (patrz tabela).
Pomiędzy podłożem a podłogą Parqcolor® Click konieczne jest ułożenie specjalnej maty składającej się z filmu PE oraz spienionego polietylenu o zamkniętej strukturze komórkowej, która spełnia funkcję bariery przeciwwilgociowej oraz akustycznej (zalecane użycie pianki Super Mousse dostarczanej przez producenta). Możliwe jest również układanie podłogi na znajdującej się już w pomieszczeniu gładkiej wykładzinie podłogowej; w tym wypadku wystarczy położyć cienką folię PE grubości 0.2 jako warstwę przeciwwilgociową (zalecane jest uszczelnienie arkuszy folii dwustronną taśmą samoprzylepną). Przy układaniu podłogi na podłożu z instalacją ogrzewania podłogowego należy przestrzegać następujących reguł:
1. Spirala grzewcza musi być umieszczona w wylewce na głębokości min 30 mm.2. Przed ułożeniem podłogi Parqcolor® Click należy doprowadzić instalację grzewczą do maksymalnej możliwej temperatury pracy (zwiększając ją stopniowo o 5oC dziennie) i utrzymać taką temperaturę przez dwa tygodnie. Przed rozpoczęciem układania podłogi należy stopniowo obniżyć temperaturę instalacji (o 5oC dziennie) aż do całkowitego wyłączenia, kontrolując jednocześnie właściwy poziom wilgotności wylewki.3. Trzy dni po położeniu podłogi należy ponownie włączyć ogrzewanie podłogowe i doprowadzić je stopniowo (5oC dziennie) do pożądanej temperatury pracy.4. Temperatura na poziomie podłogi po jej instalacji nie powinna nigdy przekraczać 28°C.
WYMAGANE NARZĘDZIAPilarka tarczowa albo piła ręczna o drobnych zębach, taśma pomiarowa, młotek, kątownik, metalowy element regulacyjny lub wykonany z PCV, dobijak w kształcie deski, dobijak w kształcie litery L.
MONTAŻ- Przed rozpoczęciem układania należy sprawdzić stan opakowań, w których dostarczono podłogę i zgodność materiału z zamówieniem.- Aby uzyskać najlepszy efekt estetyczny zaleca się układanie desek zgodnie z kierunkiem wpadania do pomieszczenia światła naturalnego.- W wąskich pomieszczeniach należy układać podłogę wzdłuż jego dłuższego boku.- Podłoga Parqcolor® Click pracuje podobnie jak podłoga z naturalnego drewna i dlatego zalecane jest stosowanie szczelin dylatacyjnych co min. 15 mb podłogi. Należy również pozostawić przestrzeń min 10 mm między krawędzią podłogi a ścianą, kolumną, futryną, itp. Nie należy mocować podłogi do podłoża przy pomocy śrub czy gwoździ. Jeśli takie mocowanie jest niezbędne należy pozostawić wokół elementów mocujących przestrzeń dylatacyjną pozwalającą podłodze na przemieszczanie się.- Powyższe informacje są efektem wiedzy i doświadczeń producenta – firmy PL S.p.A. Jako strona nieuczestnicząca w montażu producent nie przyjmuje odpowiedzialności za ewentualne reklamacje dotyczące ułożenia podłogi poza tymi dotyczącymi własności technicznych produktu.
CZYSZCZENIE I KONSERWACJA
CODZIENNE CZYSZCZENIE: Odkurzacz, zmiotka, ścierka antyelektrostatyczna.
REGULARNE CZYSZCZENIE: Łagodny detergent (w kremie, bez substancji ściernych, na bazie amoniaku lub alkoholu) rozcieńczony wodą. Dostępny jest też środek do czyszczenia Parqcolor® Cleaning. WAŻNE: używać do wycierania ścierek i mopów dobrze wyżętych.
TRUDNE DO USUNIĘCIA PLAMY: Smoła, atrament, pasta do obuwia, szminka, lakier do paznokci, itp.: używać miękkiej, czystej szmatki nasączonej acetonem, alkoholem lub innym środkiem czyszczącym do użytku domowego. Guma do żucia, wosk, itp.: pozostawić do całkowitego wyschnięcia, a następnie delikatnie zeskrobać.
NIE UŻYWAĆ: Szorstkich gąbek,detergentów z substancjami ściernymi, past i wosków do podłóg, detergentów na bazie mydła, wody w obfitej ilości.
Nie należy układać paneli Parqcolor® Click bezpośrednio na już istniejącej podłodze i trzeba się zawsze upewnić, czy podłoże jest czyste, gładkie i suche. Ułożyć najpierw odpowiednią folię izolacyjną (zalecamypiankę Super Mousse). Krawędzie sąsiadujących arkuszy założyć na zakładkę, uszczelniając łączenie silikonem lub wodoodporną taśmą samoprzylepną. Upewnić się, że folia zachodzi na ściany na co najmniej 3 cm.
Rozpocząć układanie podłogi w lewym narożniku, a kolejne panele kłaść od lewej do prawej, krawędzią z piórem skierowaną do ściany, po uprzednim odcięciu pióra. Umieścić kliny dystansowe wzdłuż ściany, aby utworzyć szczelinę dylatacyjną. Panele łączy się po uniesieniu ich pod kątem około 30°.
Aby dociąć końcowy panel każdego rzędu do potrzebnej długości należy ułożyć dwa ostatnie panele wpustami do siebie. Do wsunięcia końcowego panelu, należy użyć dobijaka w kształcie kątownika. Pozostała część panelu będzie użyta, jako panel startowy kolejnego rzędu. Deski należy układać naprzemiennie i przesunięte względem siebie co najmniej o 30cm.
Aby rozpocząć układanie drugiego rzędu desek, należy wsunąć pozostały po docięciu kawałek panelu we wpust, pod kątem około 30°.
Wstawić panel końcowy, uprzednio przycięty do właściwego rozmiaru, pozostawiając szczelinę dylatacyjną,przy użyciu w razie konieczności bijaka w kształcie kątownika (patrz zdjęcie nr 3).
Do cięcia desek, należy używać piły ręcznej z ostrzem o drobnych zębach i pozostawiając zawsze odpowiednie szczeliny dylatacyjne.
W celu uzyskania jak najlepszych wyników podczas układania podłogi Parqcolor® Click, należy podciąć futrynę za pomocą piły tarczowej z regulacją stopniową, aby utworzyć przestrzeń potrzebną do wsunięcia desek.
Powierzchnie podłogi o boku większym 8 mb (w przypadku kolekcji Vintage jest to 15 mb) należy dzielić przy użyciu odpowiednich profili dylatacyjnych, aby umożliwić naturalną pracę się podłogi związaną ze zmiennością wymiarów. UWAGA: Podłogi sąsiadujących pomieszczeń, korytarzy, pokoi, itp. muszą być oddzielane za pomocą profili dylatacyjnych.
Aby włożyć drugą deskę, należy najpierw wsunąć krótszy bok (patrz zdjęcie nr 2), a następnie dłuższy bok, unosząc nieco cały rząd desek (lub najpierw wsunąć długi bok, a następnie umocować krótki bok za pomocą dobijaka).
68 69
Parqcolor®
raised floorPodłogi podniesione
Raised floor / Sopraelevato
All Parqcolor® Collection’s Patterns can be producedDim. 60x60 cm Panel composition available to the customer: Chipboard panel in wood conglomerate, high density, complete with fireproof, waterproof hot polymerised stabilising resins. Thickness 38 mm Panel in calcium sulphate, an inert non-inflammable material, exception mechanical strength, its high density silences walking noises. Thickness 34 mmProtective edge for the panels in black self-extinguishing, anti-squeak plastic. Panels balanced in aluminium or laminate. Upper finish in Print HPL Laminate - 0,7 mm thick. Abrasion resistance AC5 ≥ 6000 revsImpact resistance IC4Permanently AntistaticClass DS - Slip resistancePL1 - PL2 - PL3 Structure
Możliwość produkcji we wszystkich wzorach Kolekcji Parqcolor®
Format 60x60 cmPanele składają się z następujących komponentów:Konglomerat wiórów drzewnych oraz żywic ognio- i wodoodpornycho podwyższonej gęstości poddany w procesie produkcji wysokiemu ciśnieniu i temperaturze. Grubość 38 mm.Płyta gipsowa – materiał chemicznie obojętny, niepalny, o znakomitej odporności ogniowej i mechanicznej, zachowujący niezmienione parametry bez względu na upływ czasu. Dzięki wysokiej gęstości oferuje również wysokie tłumienie dźwięku, co sprawia że podłoga modułowa ma walory akustyczne podobne do podłóg tradycyjnych.Grubość 34 mm.Obrzeże z czarnego tworzywa; materiał zabezpieczający krawędzie, samogasnący i nieskrzypiący. Warstwa spodnia z folii aluminiowej lub laminatu wysokciśnieniowego Print HPL o grubości 0,7 mm.Odporność na ścieranie AC5 ≥ 6000 obrotów.Klasa odporności na uderzenia IC4.Antyelektrostatyczność.Antypoślizgowość - klasa DS.Konstrukcja wsporcza PL1 –PL2 – PL3.
9464 CONCRETE70 71
CHARAKTERYSTYKA TECHNICZNA
Płyta wiórowaPanele
pokryte z wierzchu laminatem i folią alumiową od spodu
Płyta gipsowa
CIĘŻAR W KG
GĘSTOŚĆ
REAKCJA NA OGIEŃUNI 8457/UNI9174
ODPORNOŚĆ OGNIOWAEN 1366-6
NOŚNOŚĆ NA KONSTRUKCJI o grubości 18 mm (Dekaniuton)
NOŚNOŚĆ NA KONSTRUKCJI o grubości 38 mm (Dekaniuton)
KLASYFIKACJAEN 12825
10
> 720 Kg/m3
Klasa 1
REI 30
skupiona 200rozporoszona 1000
skupiona 300rozporoszona 1500
2A21
18
> 1500 Kg/m3
Klasa 1
REI 30
skupiona 200rozporoszona 1000
skupiona 300rozporoszona 1500
3A21
Podłogi podniesione Parqcolor®
DANE TECHNICZNE PRODUKTU PODŁOGI PODNIESIONE SOPRAELEVATO
Panele z płyty wiórowej: Materiał drewnopochodny o podwyższonej gęstości składający się z wiórów drzewnych oraz żywic wodo- i ogniouodpornionych.Panele o wymiarach 600x600x38 mm obwiedzione obrzeżem ochronnym z czarnego tworzywa samogasnącego i nieskrzypiącego. Panel pokryty z wierzchu laminatem wysokociśnieniowym Print HPL o odporności na ścieranie AC5 ≥ 6000 obrotów Tabera, a od spodu folią aluminiową 50/1000 lub laminatem o grubości 0,9 mm. Odporność na uderzenia IC4.
Panele z płyty gipsowej:Materiał chemicznie obojętny, niezawierający azbestu ani drewna (klasa reakcji na ogień 0).Panele o wymiarach 600x600x34 mm obwiedzione obrzeżem ochronnym z czarnego tworzywa samogasnącego i nieskrzypiącego. Panel pokryty z wierzchu laminatem wysokociśnieniowym Print HPL o odporności na ścieranie AC5 ≥ 6000 obrotów Tabera, a od spodu folią aluminiową 50/1000 lub laminatem o grubości 0,9 mm. mm. Odporność na uderzenia IC4.
Raised floorPodłoga podniesiona Parqcolor® Sopraelevato
TECHNICAL CHARACTERISTICS
ChipboardPanels
Covered on the top with laminate and on the bottom with a sheet of aluminium
Calcium Sulphate
WEIGHT KG EACH
DENSITY
FIRE REACTION UNI8457/UNI9174
FIRE RESISTANCEEN 1366-6
DecaNewton loadbearing capacity with 18 mm
stringers
DecaNewton loadbearing capacity with 38 mm
stringers
CLASSIFICATION EN 12825
10
> 720 Kg/m3
Class 1
REI 30 Full Scale
200 Concentrated1000 Distributed
300 Concentrated1500 Distributed
2A21
18
> 1500 Kg/m3
Class 1
REI 30 Full Scale
200 Concentrated1000 Distributed
300 Concentrated1500 Distributed
3A21
Raised Floor Parqcolor ®
PRODUCT SPECIFICATION, RAISED FLOOR
Chipboard panel:High density chipboard panel measuring 600x600x38 mm, made of wood conglomerate with fireproof and waterproof resins. Protective edge in black self-extinguishing and anti-squeak plastic.Upper part of the panel coated in Print HPL Laminate, abrasion resistance AC5 ≥ 6000 Taber wheel revs. Backing of the panel coated in 50/1000 aluminium foil or laminate 0,9 mm thick. IC4 Impact Resistance.
Calcium Sulphate Panel:Modular single-layer Calcium Sulphate panel, size 600x600x34 mm, completely free of asbestos and wood particles, Class 0 fire resistance. Protective edge in black self-extinguishing and anti-squeak plastic.Upper part of the panel coated in Print HPL Laminate, abrasion resistance AC5 ≥ 6000 Taber wheel revs. Backing of the panel coated in 50/1000 aluminium foil or laminate 0,9 mm thick.IC4 Impact Resistance.
72 73
9207 LIGHT OLD PINE74 75
NOTICETechnical service is guaranteed depending on the use of Parqcolor® range floorings combined with original PL S.p.A. accessories.PL S.p.A. declines any and all responsibility for the improper use of its products.Differences in tone, colour, or gloss can be present and must be accepted if they stand within the tolerance levels listed in the technical documentation. Evaluation must not be carried out with angular light or backlight.The identification of surface defects (like scratches, bumps, stains, chips on the edges, etc.) on the decorative cannot be performed in presence of angular light or backlight. The assessment must be made at least at 1,5 meters of distance.Notwithstanding the high quality standard of the raw materials used for manufacturing large sized products, these may be warped and have height differences in the joints. These characteristics must be accepted.
UWAGASerwis techniczny jest dostępny pod warunkiem zastosowania asortymentu podłóg Parqcolor® w połączeniu z oryginalnymi akcesoriami PL S.p.A.Firma PL S.p.A. nie ponosi żadnej odpowiedzialności za niewłaściwe korzystanie z jej produktów.Różnice w tonacji, kolorze, czy połysku są możliwe i muszą być akceptowane, jeśli mieszczą się w zakresie tolerancji określonej w dokumentacji technicznej. Oceny nie można dokonywać przy świetle kątowym lub na podświetlonym tle.Kontrola pod kątem defektów powierzchni dekoracyjnej (takich jak rysy, wgniecenia, plamy, zadziory na krawędziach itp.) nie może być prowadzana przy świetle kątowym lub na podświetlonym tle. Oględziny należy przeprowadzić z odległości co najmniej 1,5 metra.Niezależnie od wysokiej jakości surowców używanych do produkcji paneli w dużych formatach, mogą one wykazywać odkształcenia od płaskości oraz różnice wysokości na łączeniach. Cechy te muszą zostać zaakceptowane.
PL S.p.A Strada Provinciale per Bulgorello, 3 - 22070 Vertemate con Minoprio (CO) ItalyPh. +39.031.888.211 - Fax +39.031.901.053 www.pl-abetgroup.it e-mail:[email protected] Company Capital €. 2.080.000 - Management and Coordination ABET S.p.A VAT 01384920136 - VAT CEE IT -01384920136 Tax Code and Como Company Registration n. 00804870152
PL S.p.A Strada Provinciale per Bulgorello, 3 - 22070 Vertemate con Minoprio (CO) Italia Tel. +39.031.888.211 - Fax +39.031.901.053 www.pl-abetgroup.it e-mail:[email protected] Kapitał €. 2.080.000 - Zarządzanie i Kierownictwo ABET S.p.A Nr VAT 01384920136 - VAT EU IT -01384920136 Numer identyfikacji podatkowej i numer rejestracji Como 00804870152
Company with quality system as perUNI EN ISO 9001:2008 cert. nr 69
Firma posiada system Zarządzania JakościąUNI EN ISO 9001:2008 cert. n°69