Parallel Twin-Spindle CNC Lathe · CNC lathe for high-accuracy mass production machine for various...
Transcript of Parallel Twin-Spindle CNC Lathe · CNC lathe for high-accuracy mass production machine for various...
12in/10in
Parallel Twin-Spindle CNC Lathe
TAKISAWA TWIN CHUCKER
TT-Series
Heavy-Duty Cutting Improves the Productivity
Takisawa twin-chucker TT-350G is a parallel 2-spindle
CNC lathe for high-accuracy mass production machine
for various 12"/10"chuck workpieces, which has the
best machine rigidity in this class.
・ Reduction of power consumption.
Regenerative energy system - the energy generated when the motor
decelerates returns to the power supply - is applied.
Internal lighting shutoff function reduces standby power.
Control panel cooling design takes natural radiation amount into account to
reduce electric power.
Coolant pump runs only when coolant is being used, reducing electric power.
・ Use of oil-water separator extends the coolant life.
ENERGY SAVING SYSTEMENERGY SAVING SYSTEMEnvironment
Friendly
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 21
8-Station Turning Turret : T8 12-Station Milling Turret : T12M
Turret
Large Chip Conveyor Coolant System
The stable structure of the turret whose center of gravity is fixed in the X-axis slideway ensures high-accuracy heavy cutting.The decagonal turning (T8/T10/T12 : Direct-Mount Type) and milling (T12M : All-Holder Type) turrets ensure optimal machining.Bolt-clamping type tool holder ensures powerful tool holding.
It discharges large volume of chips generated from the both spindles towerd the rear.
■ Pomp Output : 400W■ Tank Capacity : 380L
Incomparably Close AccessibilityMovable chip chute slides up to 530mm from the chuck face.Ideal for providing a setup space of the operator.
Accessibility
18.5/15kW
400010000
5
10
20
15
0
Continuous Operating Area
30min, S3 60% Operating Area
50022503750
5
10
15
20
0
Continuous Operating Area
30min, S3 60% Operating Area
20001500250
0
5
10
20
15
0
11.6
Continuous Operating Area
30min, S3 60% Operating Area
14.2
18.5
11.6
18.5
14.2
11.6
18.5
14.2
20001000 1000 2000 30003000
Outpu
t (kW)
Outpu
t (kW)
Outpu
t (kW)
Outpu
t (kW)
Outpu
t (kW)
Outpu
t (kW)
Spindle Speed (min-1) Spindle Speed (min-1) Spindle Speed (min-1)
Standard
FANUC : αiIP30
2000min-1 3000min-1 4000min-1
573N・
m70
6.7N・
m
471.
1N・
m38
2N・
m
353.
4N・
m28
6.5N・
m
22/18.5kW
400010000
5
10
25
20
15
0
Continuous Operating Area
30min, S3 60% Operating Area
50022503750
5
10
15
25
20
0
Continuous Operating Area
30min, S3 60% Operating Area
20001500250
0
5
10
25
20
15
0
14.2
Continuous Operating Area
30min, S3 60% Operating Area
17
22
18.5
14.2
22
18.5
17
14.2
22
18.517
20001000 1000 2000 30003000
Spindle Speed (min-1) Spindle Speed (min-1) Spindle Speed (min-1)
FANUC : αiIP40
2000min-1 3000min-1 4000min-1
706.
7N・
m84
0.4N・
m
560.
3N・
m47
1.1N・
m 420.
2N・
m35
3.4N・
m
12”/10”Chuck Type
3.7/1.1kW FANUC : αiI1.5
400010000
2
1
3
4
02000 3000
Spindle Speed (min-1)
3600min-1
Continuous Operating Area
10min, S3 25% Operating Area
750 3600
1.1
3.7
47N・
m
14N・
m
Milling Type
Outpu
t (kW)
Swing Type Operation PanelEasy for set-up work and the maintenance.
Central Partition CoverThe removable chip cover can turn left/right when working around the chuck or turret.
ItemsHeight of
Square Tool Shank
Diameter of
Boring Bar Shank
8-Station Turning Turret T8 □32 φ50
10-Station Turning Turret T10 □25 φ50
12-Station Turning Turret T12 □25 φ40
12-Station Milling Turret T12M □25 φ40
・Bearing Inside Diameter : φ120・Spindle Nose (Nominal Code) :JIS A2-8
Spindle StockIn order to cope with heavy cutting and thermal displacement, low center of gravity structure is applied. Spindle core is placed at a low position from the floor and mounting base.
Spindle MotorHigh-performance spindle motor is employed for powerful cutting for 12"/10"chuck workpieces.
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 43
Turning Tool
Turning Tool
Boring Bar
Boring Bar Bush
U-DrillU-Drill Socket
DrillDrill Socket
8-Station Turret (T8)
10-Station Turret (T10)
12-Station Turret (T12)
OD Tool Holder
U-Drill Holder
*)For T8 only.
Boring Bar / Drill Holder
T8 : □32
T10/T12 : □25
*
* *
For φ20/25/32/40(Other Drill Socket:φ16)
For MT.1/2/3/4
For φ6/8/10/12/16/20/25/32/40/45
Turning Tool
Boring Bar
Boring Bar Bush
Cover
U-DrillU-Drill Socket
DrillDrill Socket
DrillCollet Rotary Tool Holder(X-Axis)
TapCollet Rotary Tool Holder(Z-Axis)
Rotary Tool Type
12-Station Turret (T12M)
OD Tool Holder
Facing Holder
(□25、H=75)
U-Drill Holder
(ID φ40、H=90)
For φ3/4/5/6/7/8/9/10/11/12/
13/14/15/16/17/18/19/20
Boring Bar / Drill Holder
(ID φ40、H=90)
For M4/5/6/8/10/12/14/16/18/20
□25
φ40
For φ20/25/32(Other Drill Socket:φ16)
For MT.1/2/3/4
For φ6/8/10/12/16/20/25/32
T8(□32、H=40)
T10(□25、H=40)
T12(□25、H=30)
For
For
For
T8(φ50、H=50)
T10(φ50、H=50)
T12(φ40、H=35)
T8(φ50、H=50)
T10(φ50、H=50)
T12(φ40、H=35)
Spacer
T8(□25)
T10(□20)
T12(□20)
For
For
For
For
For
For
For
For
For
The CNC 3-axis high-speed gantry loader is Ideal for continuous multi-processing.It is more effective coupled with the work-reversing device and work-feeder etc.
Loader Variations
Work Feeder Specifications Number of Pallets 14Loading Capacity (Per Pallet) 70kgMaximum Height 400mm
Loader Specifications (A Type)
Target Workpiece
Outside Diameter φ280mmLength 160mmWeight 15kg (×2)
Travel (Running Speed)
X-Axis (longitudinal) 110m/minY-Axis (vertical) 80m/minZ-Axis (cross) 40m/min
Turning Type
Turning / Milling Type
■ Tooling System
NG Chute Work Feeder
Gantry Loader
Machine Body
Work Feeder
Gantry Loader
A TYPE
B TYPE
C TYPE
Shortened non-production time, setup time, etc.The operability-convenient software slashes non-production time in setup.
・ RAKU-RAKU Loader 3 (Standard)Convenient function capable of easy teaching. Capable of quick operation only by a change of inputting point positions.
・ Measurement Monitor 3 (Optional)This is a function that takes measurement data from a measuring device and calculates a wear offset amount for automatically setting a wear offset value. The measurement data of 120 logs stored as log data are displayed as a log or graph based on the data so that the process performance exponent is calculated.
・ Exclusive Switch (Standard)A dedicated switch that can call up a useful function on the operation panel by one push, which can perform a smooth operation.
・ RAKU-RAKU Monitor 3 (Standard)Capable of tool management, load control, offset control, and collection of operation information.
Operating Software
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 65 Tooling System
Turning Type Turning Type
32
502”
1.5”
100
440 440
2540 1.
57”
170
650 650
3.66”
2” 11.97”
13.78” 13.78”
13.78” 13.78”
1.8”
7”
2”13.78”
11.97”1.8”
501.5”35
4.16”105
6”150
350 13.78”350305 12.47”32045
1.3”30
35
50 2”
502”
13.78” Max. Turning Dia. φ46018.11”18.11”
Max. Turning Dia. φ460
Chuck Size 12”+12”
Direct-Mount Type
T8+T8
□32
φ50
460 18.11”
325 12.80”
Type of Turret
Height of Square Tool Shank
Diameter of Boring Bar Shank
Max. Turning Diameter
Max. Turning Length
Chuck Size 10”+10”
Direct-Mount Type
T10+T10
□25
φ50
460 18.11”
326 12.84”
Type of Turret
Height of Square Tool Shank
Diameter of Boring Bar Shank
Max. Turning Diameter
Max. Turning Length
Z-A
xis
Stro
ke 3
6514
0
6050
519
.88”
14.3
7”5.
51”
Z-A
xis
Stro
ke 3
6514
014
.37”
5.51
”
Z-A
xis
Stro
ke 3
6514
014
.37”
5.51
”
Z-A
xis
Stro
ke 3
6514
014
.37”
5.51
”
12.8
”0.
25”
0.25
”
100
6050
519
.88”
100
6050
519
.88”
100
6050
519
.88”
100
220 220502”50
575 575 575 575
30511.97”30545
2” 11.97” 1.8”220 22050
2”50
1.5” 12.4”35
1.5”35320
12.4”320
1.3”30
1.3”30
30511.97”30545
1.8”45
1.8”45
172
172
325
12.8
4”32
6
172
12.8
4”32
6
12.8
”17
232
5
X-Axis Stroke 350 X-Axis Stroke 350
X-Axis Stroke 350 X-Axis Stroke 350
Std. Turning Dia. φ275
Std. Turning Dia. φ350φ660
φ280
25.98”25.98”
φ660
25.98”25.98”
10.82”10.82”
11.02”11.02”
18.11”18.11”
■ Travel Range and Interference Unit : mm inch
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 87 Travel Range and InterferenceTravel Range and Interference
Turning / Milling Type
φ66025.98”25.98”
φ660
φ20
25.98”25.98”
90
90
90
φ2238.78”8.78”
8.78”
Std. Turning Dia. φ223
Std. Turning Dia. φ250
Max. Turning Dia. φ460
18.11”18.11”
Max. Turning Dia. φ460
18.11”18.11”
Chuck Size 10”+10”
Direct-Mount Type
T12+T12
□25
φ40
460 18.11”
326 12.80”
Type of Turret
Height of Square Tool Shank
Diameter of Boring Bar Shank
Max. Turning Diameter
Max. Turning Length
Chuck Size 10”+10”
Direct-Mount Type
T12CM+T12CM
□25
φ40
460 18.11”
281 11.06”
Type of Turret
Height of Square Tool Shank
Diameter of Boring Bar Shank
Max. Turning Diameter
Max. Turning Length
30
180 120
45
85
440 35
105
650 650
150
1.5”
4.16” 6”
13.78”12.47”
1.3”
40
40
1.5”35
35
25
1.5”35
350 3590
65
20
82
□25
1.5”27510.7”
753.07”
13.78”350350320 30
Z-A
xis
Stro
ke 3
65
1.38” 12.6”
13.78”
1.18”220 22035
1.38”35
575 575 575 575
32012.6”32030
1.38” 12.2” 1.57”175 17590
1.38”90310
12.2”31040
1.57”40
1.18”30
X-Axis Stroke 35013.78”
X-Axis Stroke 350 10.7”1.5”275
10.7”275
13.78”X-Axis Stroke 350
13.78”X-Axis Stroke 350
351.5”35
3.07”75
3.07”75
140
6050
519
.88”
14.3
7”5.
51”
Z-A
xis
Stro
ke 3
2014
012
.6”
5.51
”
Z-A
xis
Stro
ke 3
2014
012
.6”
5.51
”
Z-A
xis
Stro
ke 3
6514
014
.37”
5.51
”
12.8
6”0.
25”
0.25
”
100
6046
018
.11”
100
45
6046
018
.11”
100
45
6050
519
.88”
100
172
326
11.0
8”0.
25”
172
281
11.0
8”17
228
1
12.8
6”17
232
6
Turning Type
■ Travel Range and Interference Unit : mm inch
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 109 Travel Range and InterferenceTravel Range and Interference
【Loader Specifications (A or B Type)】 TT-350G TT-350CMGTarget Workpiece
Outside Diameter mm inch 280 11.02"
Length mm inch 160 3.60"
Weight kg lbs. 15 (×2) 33 (×2)
Travel (Running Speed)
X-Axis (longitudinal)mm inch
(m/min ipm) 2790 109.84" (110 4330.71")
Y-Axis (vertical)mm inch
(m/min ipm)1290 50.79" (80 3149.61")
Z-Axis (cross)mm inch
(m/min ipm) 350 13.78" (40 1574.80")
Hand Type 3-Jaws
Stroke mm inch φ 64 2.52"
【Work Feeder Specifications】Number of Pallets (3 Guide Bars/Pallet) 14
Loading Capacity (Per Pallet) kg lbs. 70 154
Maximum Height mm inch 400 15.75"
■ Machine Specifications ■ Machine Standard AccessoriesT8 T10 T12 T12M
12" Solid Chuck and Cylinder L/R (Each 1) - - -
10" Solid Chuck and Cylinder - L/R (Each 1)
Chuck Auto Open/Close M-Function L/R (Each 1)
Chuck Airblow (Outside Spindle) L/R (Each 1)
Signal Tower Light (3-Color) L/R (Each 1)
Chip Conveyor (Caterpillar Type / Rear) ○ ○ ○ ○
Tool Holders *1 L/R (Each 5)
Auto Power-Off System ○ ○ ○ ○
Total Counter L/R (Each 1)
Gantry Loader ○ ○ ○ ○
Work Feeder ○ ○ ○ ○
Work Turnover Unit ○ ○ ○ ○
NG Chute ○ ○ ○ ○
Splashguard ○ ○ ○ ○
Hydraulic Unit (1.5kW × 2) ○ ○ ○ ○
Footswitch for Hydraulic Unit L/R (Each 1)
Coolant Pump (400W × 2) ○ ○ ○ ○
Lighting Apparatus ○ ○ ○ ○
Adjustment Tool Set ○ ○ ○ ○
Instruction Manual ○ ○ ○ ○
■ Machine Optional AccessoriesRotary Tool Holder (for X-Axis) *2
Rotary Tool Holder (for Z-Axis) *2
Collet (for Rotary Tool) *2
OD Turning and Facing Tool Holder
Boring Bar / Drill Holder
U-Drill Holder
Offset U-Drill Holder
Boring Bar Bush
Drill / U-Drill Socket
Special Chuck
Spindle Motor
Spindle Orientation *3
Chip Bucket
Tool Setter
*1) Selectable for OD Turning & Facing, or Boring Bar/Drill
*2) Applied to TT-350CMG
*3) Disk brake type (Max. 360 Point) with M-Function
※ For other optional accessories, please contact us.
18.5/15kW : 2000min-1
18.5/15kW : 4000min-1
22/18.5kW : 2000min-1
22/18.5kW : 3000min-1
22/18.5kW : 4000min-1
(with A or B Type Loader)
1233 829 1088
4395173.03”
475 47518.7” 18.7”
702.76”
772
30.3
9”
9.3
7”
3753
Chip
Conve
yor
Pull
Out
2150
84.6
5”
147.7
6”
8.7
4”
717
25.2
3”2
22
238
398 84748.54” 35.64” 42.84” 15.67” 33.35”
2983
117.4
4”
3150
1250
475 18.7” 18.7”60 2.36” 475
650 125049.21” 25.59” 49.21”
Door Opening WidthDoor Opening Width
Loader X-Axis 2790st.109.84”
Loader Z-Axis 350st.
Load
er Y
-Axi
s12
90st
. 50.
79”
4493
3423
134.7
6”
1750
176.8
9”
68.9
”
1245
700st. 27.56”
13.78”
Turnover unit draw-out dimension for maintenance547
124.02” 49.02” 21.54”
4395173.03”
ItemsTT-350 TT-350CM
T8 T10 T12 T12M
Capability ・
Capacity
Distance Between Spindles mm inch 650 25.59"
Max. Turning Diameter mm inch 460 18.11"
Max. Turning Length mm inch 325 12.80" 326 12.84" 281 11.08"
TravelX-Axis Travel mm inch 350 13.78"
Z-Axis Travel mm inch 365 14.37" 320 12.60"
Spindle
Number of Spindles 2
Spindle Speed min-1 40 ~ 3000 27 ~ 2000 53 ~ 4000
Spindle Nose (Nom, Code) JISA2-8
Through-Hole Diameter mm inch 86 3.39"
Bearing Inside Diameter mm inch 120 4.72"
Turret
Number of Turrets 2
Number of Attachable Tools 8+8 10+10 12+12 12+12
Height of Square Tool Shank mm inch 32 1.25" 25 1"
Diameter of Boring Bar Shank mm inch 50 2" 40 1.5"
Rotary Tool
Number of Rotary Tools - 12+12
Spindle Speed min-1 - 36 ~ 3600
Maximum Tool Shank Diameter mm inch - 20 0.79"
Tool Spindle Taper Hole (Type, Nom, Code) - AR32
Tool Spindle Bearing Inside Diameter mm inch - 35 1.38"
Feed Rapid Traverse Rate m/min ipm X:24, Z:24 X:944.88", Z:944.88"
Motors
Spindle Motor (30 min/continuous) kW HP18.5/15 22/18.5
22/18.5 29.3/24.7
Rotary Tool Spindle Motor (15 min/
continuous)kW HP - 3.7/1.1 4.9/1.5
Feed Axis Motor kW HP X:1.8, Z:2.5 X:2.4, Z:3.3
Hydraulic Pump Motor kW HP 1.5 2
Coolant Pump Motor kW HP 0.4 0.5
Required
Power
Electric Power kVA 63.8 73.2(22kW)
Air Pressure Source Mpa 0.4
Tank
Capacity
Hydraulic Unit Tank L gal 30 7.92
Lubricant Tank L gal 6.5 1.72
Coolant Tank L gal 380 100.32
Machine
Size
Machine Height (Loader Top) mm inch 4493 176.89"
Floor to Spindle Center Height mm inch 1200 47.24"
Required Floor Space mm inch 4395 × 3753 173.03" × 147.76"
Machine Weight kg lbs 13500 29700 13500 29700 13500 29700 13700 30140
※ Red is Optional.
■ Machine Dimensions Unit : mm inch
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 1211 Machine Accessories and Machine DimensionsMachine Specifications
Specifications ・ Contents TT-350G TT-350CMG【NC Unit】Loader A, B, C Type 0i-TD(2)+0i-TD
Loader D Type 0i-TD(2)+0i-TD(2)
Screen (8.4" Color LCD/MDI) ● ●
【Software】RAKU-RAKU Monitor 3 ● ●
RAKU-RAKU Loader 3 ● ●
Measurement Monitor 3 *1 ◎ ◎
【Safety Devices】Front Door Interlock ● ●
Front Door Locking Mechanism ○ ○
Safety Relay ● ●
Control Panel Breaker with Tripper ● ●
NC Unit SpecificationsFANUC : 0 i-TD, 0 i-TD(2)
Specifications ・ Contents 0i-TD【Controlled Axes】Least Input Increment *2 ●
Maximum Programmable Dimension (±999999.999) ●
Cs Contour Control CM
Least Input Increment C *3 ▲
Inch/Metric Selection ●
Interlock ●
Machine Lock *4 ○
Emergency Stop ●
Stored Stroke Check 1 ●
Stored Stroke Check 2, 3 *5 ▲
Stroke Limit Check Before Movement ▲
Chuck Tailstock Barrie *6 ▲
Mirror Image (Each Axis) ▲
Chamfering ON/OFF ●
Overload Detection *7 ▲
Position Switch ◎
【Operation】Auto Run (Memory) ●
MDI Run ●
DNC Run *8 ◎
DNC Run with Memory Card *8 *9 ◎
Program Number Search ●
Sequence Number Search ●
Sequence Number Collation and Stop ●
Wrong Operation Preventive ▲
Buffer Register ●
Dry Run ●
Single Block ●
Jog Feed ●
Manual Reference Point Return ●
Dogless Reference Point Setting ●
Manual Handle Feed, 1 Unit ●
【Interpolating Functions】Positioning (G00) ●
Exact Stop Mode (G61) ●
Tapping Mode (G63) ●
Cutting Mode (G64) ●
Exact Stop (G09) ●
Linear Interpolation (G01) ●
Circular Interpolation (G02/03) ●
Dwell (G04) ●
Polar Coordinate Interpolation CM
Cylindrical Interpolation CM
Thread Cutting ●
Multiple Thread Cutting ●
Thread Cutting Cycle and Retraction ●
Continuous Thread Cutting ●
Variable Lead Thread Cutting ●
Reference Point Return (G28) ●
Reference Point Return Check (G27) ●
2nd Reference Point Return (G30) ●
3rd, 4th Reference Point Return ◎
【Feed Functions】Rapid Traverse Override (F0,25%,50%,100%) ●
Feed Per Minute ●
※ Please contact our sales persons for further information.
Specifications ・ Contents 0i-TDFeed Per Revolution ●
Constant Tangential Speed Control ●
Cutting Feedrate Clamp ●
Automatic Acceleration/Deceleration ●
Rapid Traverse Bell-Shaped Accel/Decel ●
Linear Accel/Decel After Feedrate Interpolation ●
Feedrate Override (15 steps) ●
Jog Override (15 steps) ●
Override Cancel ●
Manual Feed Per Revolution ▲
【Program Input】Tape Code (EIA/ISO Auto Recognition) ●
Label Skip ●
Parity Check ●
Control In/Out ●
Optional Block Skip, 1 Piece ●
Optional Block Skip (2 to 9 Pieces) ◎
Program Number O4 Digits ●
Sequence Number N5 Digits ●
Absolute/Incremental Command ●
Decimal Point Input/Pocket Calculator Type Decimal Point Input
●
Diameter/Radius Programming (X-Axis) ●
Coordinate System Setting (G50) ●
Auto Coordinate System Setting ●
Drawing Dimension Direct Input *10 ▲
G-Code System A ●
G-Code System B/C ▲
Chamfering/Corner R Programming *11 ●
Programmable Data Input ●
Sub Program Call (10 Levels) ●
Custom Macro ●
Additional Custom Macro Common Variables ●
Single Canned Cycle ●
Combined Canned Cycle ●
Combined Canned Cycle Ⅱ ●
Drilling Canned Cycle ●
Arc Radius Programming ●
Macro Executor *12 ●
Coordinate System Shift ●
Coordinate System Shift Direct Input ●
【Miscellaneous Functions/Spindle Functions】M Function (M3 Digits) ●
Second Miscellaneous Function (B Function) ●
Spindle Functions (S4 Digits) ●
Constant Surface Speed Control ●
Spindle Orientation (No Lock, 1 Point) ●
Rigid Tap (Spindle Center) ●
Rigid Tap (Rotary Tool) CM
【Tool Functions/Tool Offset Functions】T Function (T2+2 Digits) ●
Tool Offsets, 64 Pieces *13 ●
Tool Offsets, 99 Pieces ○
Tool Offsets, 128 Pieces *14 ●
Tool Offsets, 200 Pieces *14 ○
Tool Position Offset ●
Tool Diameter/Nose R Compensation ●
Tool Geometry/Wear Compensation ●
Tool Offset Counter Input ●
Tool Offset Measured Value Direct Input ●
Tool Offset Measured Value Direct Input B *15 ○
Tool Life Management *16 ●
【Accuracy Offset Functions】Backlash Compensation ▲
Backlash Compensation by Rapid Traverse / Feedrate ▲
【Editing】Part Program Memory Capacity 521Kbyte (1280m) *13 ●
Part Program Memory Capacity 1Mbyte *14 ●
Registrable Programs, 400 Programs *13 ●
Registrable Programs, 800 Programs *14 ●
Program Editing ●
Program Protection ●
Extended Program Editing ●
Background Editing ●
Specifications ・ Contents 0i-TD【Setting/Display】Status Display ●
Clock Function ●
Current Position Display ●
Program Comment Display (31 Characters) ●
Parameter Setting and Display ●
Alarm Display ●
Alarm Log Display ●
Operator Massage Log Display ●
Operation Log Display ▲
Run Hours and Parts Count Display ●
Actual Speed Display ●
Actual Spindle Speed and T Code Display ●
Floppy Cassette Directory Display ●
Grouped Directory Display and Punching ●
Servo Adjustment Screen ●
Maintenance Information Screen ●
Data Protection Key, 1 Kind ●
Help Function ●
Self Diagnostic Function ●
Scheduled Maintenance Screen ●
Hardware & Software System Configuration Display ●
Graphic Display ●
Dynamic Graphic Display ○
【Display Languages】English ●
Other Language *17 ▲
Display Language Dynamic Switching ▲
【Data I/O】
RS-232C Interface for 1ch ●
Fast Data Server ◎
External Message ●
External Workpiece Number Search ◎
Memory Card I/O ●
● : Standard ○ : Optional ◎ : Special - : None ▲ : Parameter setting is required.(Note: Normally, the parameters need not to be changed. If the parameters are to be set or changed, understand completely the functions of such parameters. Wrong setting could cause the machine to be moved unexpectedly, resulting in machine or workpiece damage or personal injury.)
CM : C-Axis/Milling Standard Specification.
*1) I/O addition and the PC change are necessary. *2) 0.001mm, 0.0001inch, 0.001deg(for CM type)*3) IS-C 0.0001mm, 0.0001deg, 0.00001inch.*4) Addition of switch is required.*5) Not coexistent with chuck tailstock barrier.*6) Not coexistent with Stored Stroke Check 2, 3.*7) Required when RAKU-RAKU Monitor 3 is used.*8) DNC run mode transfer switch is required.*9) CF card and adaptor is required.*10) Not coexistent with chamfering/corner R.*11) Not coexistent with drawing dimension direct input.*12) Required when RAKU-RAKU Monitor 3/RAKU-RAKU Loader 3 is used.*13) Sub NC.*14) Main NC, Two system total number. *15) Tool setter is required.*16) Cannot be used when RAKU-RAKU Monitor 3 is installed.*17) Japanese (Kanji), German, French, Spanish, Italian, Chinese (traditional),
Chinese (simplified), Korean, Portuguese, Dutch, Danish, Swedish, Hungarian, Czech, Polish, Russian, Turkish
The loader operation settings can be changed simply by the operation from the dedi-cated screen without modifying the program.
Easy and convenient multi-functional software that can perform the tool life manage-ment, cutting load monitoring, group control, and also run information collection, Cp (process capability) calculation, and periodic offset addition.
This function loads the measured data from a measuring unit and sets automatically the offset value. Also, various convenient functions such as graphical display, Cp (process capability) calculation, and data input/output are included.
* The software specifications are subject to change for improvement without notice.
【Standard Accessory】
【Optional Accessory】
▲ RAKU-RAKU Loader 3
▲ RAKU-RAKU Monitor 3
【Standard Accessory】
Software
RAKU-RAKU Monitor 3
RAKU-RAKU Loader 3
Measurement Monitor 3
■ Composition
■ Main Function List
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 1413 NC Unit SpecificationsNC Unit Specifications
TT-350G
*The appearance, specifications, and relevant software of the product are subject to change for improvement without notice.
*Please make an inquiry to our sales representatives for details of the product.
TAKISAWA MACHINE TOOL CO., LTD.983 Natsukawa, Kita-ku, Okayama 701-0164, JAPANTelephone : (81)86-293-1500Fax : (81)86-293-5799Website : http://www.takisawa.co.jpE-mail : [email protected] (America)
[email protected] (Europe)[email protected] (Asia)
■ Overseas NetworkTHAILAND Takisawa (Thailand) Co.,Ltd.
Telephone : (66)2726-1530-2 Fax : (66)2726-1533
INDONESIA PT. Takisawa IndonesiaTelephone : (62)21-45852466 Fax : (62)21-45852467
INDIA SAP Takisawa Machine Tools Private Ltd.Takisawa Mchine Tool India Liaison OfficeTelephone : (91)80-26662386 Fax : (91)80-26662392
CHINA Takisawa (Shanghai) Co., Ltd.Telephone : (86)21-6235-0938 Fax : (86)21-6235-0905
USA Takisawa, Inc. Telephone : (1)847-419-0046 Fax : (1)847-419-0043
GERMANY Takisawa Machine Tool Germany Representative OfficeTelephone : (49)2056-2598-15 Fax : (49)2056-5994-79
Japanese laws prohibit this machine from being used to develop or manufacture “weapons of mass destruction” or “conventional arms”, as well as from being used to process parts for them.Export of the product may require the permission of governmental authorities of the country from where the product is exported.Should you wish to resell, transfer or export the product, please notify Takisawa Machine Tool Co., Ltd. or our distributor in advance.
NC524E1403FN1000A
(Head Office)
CM007ISO 14001 12ER-865
(Head Office)
ISO 9001 CertifiedJQA-2010