Paracord Keychains !

Step 1: Paracord Keychain - Step 1

Attach the Paracord to the Key ring, make sure both Paracord tails are pointing out. You can make the loop as long or short as you want the Paracord Keychain to turn out. You can leave a inch or so loop at the end.

Step 2: Paracord Keychain - Step 2

This is instructions for the Cobra braid key chain, Lay one piece of Paracord across the top, about a inch from the ring. This will be the center color of the Paracord keychain.

Step 3: Paracord Keychain - Step 3

Now bring the second piece of paracord over the top of the first, around the back, and up through the whole made by the first piece of Paracord. Note, the color of the center piece of paracord, is the color of the sides, on the opposite side of the Paracord Bracelet.

Step 4: Paracord Keychain - Step 4

Now pull both paracord tails tight, evenly, and repeat steps 2 through 4. until you there's about a inch and a half paracord loop left (or how ever long you want it).

Step 5: Paracord Keychain - Finishing

Bring the ends through the loop and into the centre of 2 stitches.

Step 6: Paracord Keychain - Finished

Then cut and melt the ends. Your Paracord Keychain should look something like this. !