Paper ProcessingEquipment Repairand Re-engineering

Paper Processing Equipment Repair and Re-engineeringSingle SourcingITT PRO ServicesTM is your one source for repairand re-engineering of ALL paper processing equipment, regardless of original manufacturing.We have been in the paper business with ourGoulds and A-C brands for over 150 years.Economical AlternativeNeed an economical alternative to high costreplacement parts? Our PRO ServicesTM Centers areexperienced with reconditioning paper processing equipment and restoring it to original specifications.We will upgrade materials to extend service life.Economical PRO ServicesTM reduces the need forexpensive replacement parts inventory and providesthe latest upgrades in engineering technology.Experience CountsYears of experience allow PRO ServicesTM Centers toeasily handle any paper processing equipmentincluding pumps, mixers, pulpers, feeders, knotters,fans and compressors.■ ISO Certified Facilities backed by the technologi-

cal expertise and financial strength of ITTIndustries.

■ Quality repairs and re-engineering insure maximum reliability and extended service lifefrom your equipment.

■ One-year warranty on all rebuilds/repairs.■ Upgrade old designs to latest technology and

metallurgies to maximize reliability.■ Reduced storeroom parts inventories. Let PRO

ServicesTM take care of your parts and re-builds.■ Reduce purchase order transaction cost with the

elimination of orders for numerous vendors. One order for all our equipment repair andreplacement parts.

■ Eliminate costly, time-consuming record-keepingactivities. PRO ServicesTM will maintain accuratejob file histories for each piece of equipment.

Pulpers andExtraction PlatesWe weld-up and hard facepulper vanes and hard facethe wiper bands on extractionplates for extended servicelife. We balance pulpers andreturn the worn parts to new and better condition.

2

Extraction Plate 400 Series SS Fab or Cast New

Screen Rotor for Pulpmill Use

At Right: Voith Sulzer Pulper Rotor

Pulper Impeller for use in Recycle Area, “High Wear”

BEFORE AFTER

Pump RepairsWe specialize in pump repairs.Whether you need work on paper stock pumps or multistage, high pressurepumps, our technicians canbring your unit back to originalspecifications. If parts arerequired, we can supply OEMquality replacement partsthrough our ProCast subsidiary.

Screen Rotors / Rectifier ScreensRebuilds include replacing vanes, repairing bearing journals,replacing shafts, complete assembly and balancing of the unit.

Sandy Hill Steam MixersShaft repair or replacement. Replace sleeves, bearings, repair or replace mixer bars, balance mixer rotors, housing repairs,assembly and paint.

High Shear MixersRepair or replace rotor, LHand RH mixing rings, shaftand sleeve replacement,and housing repairs.Mixers are completelyreassembled and ready forre-installation.

3

Ahlstrom LRS Pump. Use: 4-6 pumps forevery digester. ProCast Makes all Parts.

KSB Boiler FeedWater Pump.

Use:Powerhouse

JohnstonVertical Pump

Aluminum Fans for Steam Dryer BEFORE AFTER

Bird Rotor Screen for Use in Pulp Mill

Impco 600 & 1000 Hi-ShearMixers

Impco 600 High Shear Mixer Use: Bleach Plant (SS, HastC, or Titanium)

600 Mixer Ring Impco 600 Mixer Rotor forUse in Pulpmill

*MC is Registered Trademark of Andritz & Kvaerner.

Kamyr MC® Pumpex: MCV, MR, 30/20

Impco MC® Mixer ex:30/20, 40/25 for Use inBleach Plants made in SS,Hast & Titanium.

Ahlstrom MC® Mixer for use in Pulp Mill

Bird Rotor 800 Rotor for Use in Screen Room of PulpMill 316SS

Screen Rotor for Use in Pulp Mill

“Repair or New”

For more information, call your nearest PRO ServicesTM Center,or visit our website at www.ittproservices.com.

Worldwide Capability

Form FPP 2/04

© copyright 2004 ITT Industries, Inc.

Whether you are in the Southeastern USA or SoutheastAsia, ITT PRO ServicesTM has a worldwide network of service centers to care for your equipment repair needs. If you are an international company yourself, you willfind coordination of multilocation projects can be easilyadministered by PRO ServicesTM. On the local level you can count on personal, courteous service from your PRO representative.

PRO ServicesTM CentersNorth AmericaUnited StatesBaton Rouge, LABirmingham, ALChicago, ILCorpus Christi, TXGreensboro, NCHouston, TXHuntington, WVLakeland, FLLos Angeles, CAPewaukee, WIPhiladelphia, PASalt Lake City, UTCanadaEdmonton, ABPort Colborne, ON

South AmericaAntofagasta, ChilePureto Ordaz & Puerto LaCruz, VenezuelaTizayuca, Mexico

Asia Pacific Rayong, Thailand

EuropeAxminster, United KingdomKempen, GermanyVienna, Austria

High Pressure FeedersWe provide Titanium part upgrades or Titanium cladding to old 317SS feeders, extending the service life ofthe unit and lowering life cycle costs.

KnottersRepair shafts,replace sleeves,bearings, hard face overlay andbalancing.

RefinersReplace stainless cladding on olderiron units, journal repair, sleevereplacement, machine faces trueand balance the unit.

Sprout WaldrenRefiner Rotor

BEFORE AFTER

BEFORE AFTER