PAPER CHEMICALS WATER TREATMENT CHEMICALS INDUSTRY SPECIALITY CHEMICALS CHEMICAL RAW MATERIALS.
-
Upload
philomena-oconnor -
Category
Documents
-
view
247 -
download
6
Transcript of PAPER CHEMICALS WATER TREATMENT CHEMICALS INDUSTRY SPECIALITY CHEMICALS CHEMICAL RAW MATERIALS.
PAPER CHEMICALSWATER TREATMENT CHEMICALS
INDUSTRY SPECIALITY CHEMICALS
CHEMICAL RAW MATERIALS
INTRODUCTION
We have been developing specialty chemicals of various kinds that improve on a
quality of paper,textile,water since 2002.
We produce and distribute all kind of paper processing
chemicals and additives of coated paper, surfactant and chemical raw materials,
textile, water management chemicals.
And now we have many customers who are using our product in Korea and Asian
country.
For meeting of our customer’s requirement we will do our best in parts of the
developing products and the rigid quality control systems.
We will concentrate our efforts development of new products
and the best products.
Coating AdditiveAnionic wax emulsionExcellent water-proof
Water Repellent
Process EquipmentReduces MaintenanceIncrease Production
Cleaner
Coating ColorInsolubilizer for Binder in Coating Color. Mottling and blistering resistance are improved and printing effect is maximized
Insolubilizer
Stock preparation(Machine chest)
Improved dimension stability , Improved printabilityReduces linting
Linting/Dusting
Wet endIt can improve the efficiency of retention aids, Dry and wet strength agents, and internal sizing agents, or reduce their use amount while keeping the same effects.
Fixing agent
Size pressAnionic emulsion , Resistance to water or ink Improving Of printability
Surface sizing
Wet endReduce Downtime. Improve QualityPitch/Sticky control
Stock preparationReduce fiber cost , Increase production. Enhance physical properties, Improve Quality & Strength
Wet & Dry Strength
Stock preparation, Wet endPrevent Scale contamination, A wide scope Temperature, Consistency, PH
Scale control
Stock preparationImprove ink removal , Improve paper QualityReduce Bleaching cost
Deinking
Stock preparationImprove Tissue Softness & SmoothnessSoftner
Mixing chest, Machine chestReduce Downtime , Prevent the slime,Prevent the bacteriaBiocides
Wet end, Coating starchImprove Quality , Increase Drainage, Improve runabilityAntifoam
ClothingReduce Downtime , Increase Quality,Improve Clothing shelf-lifeWire Passivation/Felt Conditioning
Tissue (Yankee Dryer)Controlling Yankee Dryer release propertiesReleasing agent
Tissue (Yankee Dryer)Increase sheet hand feel properties , Increase blade shelf-lifeCreping agent
APPLICATIONFEATURESPRODUCTS
PAPER CHEMICALS
TISSUE FINE PAPER NESPRINT WATER TREATMENTPACKAGING
• CREPING/RELEASING
• WIRE PASSIVATION
• FELT CONDITIONING
• BIOCIDES
• ANTIFOAM
• SCALE CONTROL
• CLEANERS
• WET STRENGTH
• DRY STRENGTH
• PITCH/STICKY
CONTROL
• SOFTNER
• BOILOUT
• DUSTING CONTROL
• WHITE WATER
CONTROL
• DEINKING
• FELT CLEANER
• BIOCIDES
• ANTIFOAM
• SCALE CONTROL
• CLEANERS
• ROLL RELEASE
• PITCH/STICKY
CONTROL
• INSOLUBILIZER FOR
COATING COLOR
• BOILOUT
• WATER TREATMENT
• SIZING
• FELT CONDITIONING
• STRENGTH
• FELT CONDITIONING
• CLEANER
• BIOCIDES
• ANTIFOAM
• SCALE CONTROL
• LINTING/DUSTING
CONTROL
• ROLL RELEASE
• PITCH/STICKY
CONTROL
• WATER CLARIFICATION
• BOILOUT
• DEINKING
• FIXING AGENT
• SCALE CONTROL
• FELT CONDITIONING
• WIRE PASSIVATION
• BIOCIDES
• ANTIFOAM
• CLEANERS
• ROLL RELEASE
• PITCH/STICKY
CONTROL
• INSOLUBILIZER FOR
COATING COLOR
• BOILOUT
• WATER TREATMENT
• WATER REPELLENT
• WET/DRY STRENGTH
• DEINKING
• COAGULANT
• FLOCCULANT
• BIOCIDES
• ANTIFOAM
• SLUDGE DEWATERING
• CLEANERS
• ORDOUR CONTROL
• FRESH WATER
STERILIZATION
• SCALE CONTROL
• BOILER TREATMENT
Paper Market Products :
PAPER CHEMICALS
TISSUE Creping AgentProducts : HISOFT – C SERIESHisoft is a cationic polyamide adhesive in an aqueous solution. It is one of a series of specialty formulated crepe adhesive used in
the manufacturing of tissue and towel products. It is compatible with all crepe releasing agents, to provide the proper balance for
effective creping. It has excellent rewet properties, Yankee surface protection, and adhesive. It can increase sheet hand feel properties
and blade shelf-life.
TISSUE Softener and Crepe Release AgentProducts : HISOFT – Q & R SERIESHisoft have been designed specifically to be added to paper stock by wet end addition for the purpose of softening tissue and
absorbent papers or by the surface spray application method to improve Yankee dryer crepe release properties.
It contains a blend of fully refined mineral oil, esters and nonionic surfactants that makes this product easily emulsify in water.
It is specifically formulated as an effective crepe release in the MFG of tissue and towel products. It is compatible with all commercial
crepe adhesives, to provide the proper balance for effective creping.
PAPER CHEMICALS
DefoamerProducts : FETROL – DF SERIESMixture of aliphatic hydroxy compounds and hydrocarbons in the form of an aqueous emulsion(water soluble & oil types)
Foam control for paper and waste water treatment industrial process.
14%Weak
AnionicMilk-white
Silicone
Emulsion FETROL DF -220
Foam control for waste water treatment
industrial process.25%
Weak
AnionicMilk-white
Silicone
EmulsionFETROL DF -130
Foam control for paper and waste water treatment industrial process.
16%Weak
AnionicMilk-white
Silicone
Emulsion FETROL DF -110
Silicone oil
compound
Composition
Nonionic
Ionic
Activity
FETROL DF -500
Name of Products
100% active content, effective in
nonaqueous system.100%
Translucent
gray
Properties& FeaturesSolid
ContentsAppearance
Foam control for papermaking.
Used hot water system.30%FETROL DF -620
Foam control for papermaking.
Used relatively hot water system.30%FETROL DF -612
Foam control for papermaking.
Used cold water system.30%FETROL DF -506
Foam control for membrane and high
temp. water treatment.30%FETROL DF -610
Fatty alcohol
& fatty acid
Ester mixture
Composition
Weak
anionic
Ionic Activity
FETROL DF-105
Name of Products
Foam control for membrane and high
temp. water treatment.18%
Milk-white
emulsion
Properties& FeaturesSolid ContentsAppearance
PAPER CHEMICALS
Dry & Wet Strength ResinProducts : NEOLEX – WS,DS SERIESDry strength resin increase burst strength and tensile strength by hydrogen bond and ionic bond with cellulose and hemicellulose in pulp.
Wet Strength Resin is the Epichlorohydrin modified cationic polyamide resins for better addition use, and have the effect of the improving
wet strength.
Contaminants cleaning Agent on DryerProducts : FETROL – DC SERIESNow and day, the most important target in the Paper industry is, producing paper of good quality, and more fast. But, occasionally is
happened to spend many times for cleaning and repair by frequent breakdown and pollution of production facilities, and
case that these problems cause hindrance to achieve paper-manufacturing company’s target. Hereupon our company, minimizing
occurrence of Paper-Dust-Lump that is happened in Dryer, try to reduce problem that refer over, and also maintain the best
dryer condition, and satisfy paper-manufacturing companies’desire. It is, by developed product to fulfill Paper-Manufacturing
Companies’desire. We believe that this product give many advantages to you.
PAPER CHEMICALS
Contaminants Control Machine Clothing Products : FETROL – WP,MC,SC,DC,FC SERIESPrevention of pitch, stickies, glues, scale and other wet end contaminants on the Wire, Felts, Machine, Pipe or eliminates deposit accumulation r
esulting in improved sheet quality and extended life. Improved machine runnability.
BiocideProducts : FETROL – BC SERIESThe expected benefits of Biocide are as follows.
- Excellent for removing fungi and algae which form slime
- Prevents the slime from further development with maintaining its property long
- Works well all over the PH range
- Can be effectively used with other chemicals with optimal compatibility
Deinking AgentProduct : DEINKING – DI SERIESAs the Deinking agent of ONP(Magazine + Newsprint + Ground wood free, etc) used,
DEINKING chemical to be developed suitable for flotation/washing process system is dispersant/collecting nonionic surfactant.
This surfactant specifically designed to maximize ink removal for printed recycled fiber and office waste deinking system.
This product has demonstrate excellent dirt removal capability by effectively conditioning the inks found in white ledger furnishes.
The presence of kneading or dispersion enhances its performance. This product is intended for paper industry use only.
1. It is a nonionic surfactant of special alcohol delivative that maximized ink aeration in flotation cells 2. It is very excellent in absorbing ink into foams by preventing ink particles from re-adhering to foams 3. It has very little loss of textile during processes, and minimizes foam troubles during deinking process 4. Easy to treat waste water and good bio-degradability
PAPER CHEMICALS
InsolubilizerProducts : NEOLEX – CI SERIESThere are many chemically different types of insolubilizers, but they all have the same function – to add Water Resistance.
Water resistance is particularly important in offset printing, but also for wallpaper and in storage of board packages.
In double-coated board, crosslinkers are used in the pre-coating to impart water resistance against the topcoat.
The water resistance can be measured as wet rub and wet pick or seen as less pick, print mottle, or binder migration.
The water sensitivity of paper and board coating originates from the fact that water-soluble binders tend to lose their binding
power in contact with water and dissolve. This water sensitivity of binders can be described as the amount of O-atoms
in the molecule (in hydroxyl and carboxyl groups). The water sensitivity can be decreased by crosslinking the soluble binders
together with insolubilizers or by building an insoluble net around the binders.
It causes ionization of coating color to delay through hydrogen bonding with water molecules and enhances liquidity.
After drying is started and water is removed, rapid ionic bonding between cationic ion and anionic ion makes floating point lower
and binder migration is restricted. Therefore, coating layer becomes thicken and multi-porous. Mottling and blistering
resistance are improved and printing effect is maximized.
Surface Sizing AgentProducts : EX – SERIESEX is a surface sizing agent for paper and paperboard. This product is added alone or combined with starch on unsized or internally sized paper, acid or neutral. It is slightly anionic and does not need alum, which does not reduce the efficiency.
Water RepellentProducts : POLYFIX– PW SERIESPOLYFIX is water repellent of paraffin wax type. This product is can be used with starch
And binder and have a good stability of emulsification.
PAPER CHEMICALS
Waste water systemThese products combine heavy metal ions in wastewater and form insoluble materials for effective metal ion removal.
Heavy metal remover
Waste water systemThese products are effective anionic flocculants selected for chemical treatment of wastepaper.
They can be used with sedimentation or flotation methods.This products are water-soluble cationic polymer flocculants used for easing sludge thickening or solid-liquid separation (dewatering) of colloidal suspensions.
Flocculant
Waste water systemThis product is developed for biological treatment of wastewaters. It shows superior effects when used in active sludge treatment.
Microbial propagation aid
Waste water systemThese products are odor-cides prepared for removing offensive in inhibiting the odor-origin microbial growth and have superior de-odoring effects.
Odor Control
Waste water systemThese products are cleaning agents for filter cloth to solve the problems of increased sludge cake water content and lower dewatering speed due to filter cloth contamination.
Cleaners
Waste water systemThese products are very effective in removing general oils, emulsion oils, and color pigments, or in treating emulsion polymerization wastewaters.
Coagulant
Waste water systemThese products are economical defoamers that can be widely used in sewage and wastewater treatment fields. They are made from chemically and physiologically stable silicones, and they have both good defoaming and antifoaming properties.
Defoamer
APPLICATIONFEATURESPRODUCTS
WATER TREATMENT CHEMICALS
PASSPASSPASSPASSPASSPASSPASSPASSPolynuclear Compounds, 260-350nmPASSPASSPASSPASSPASSPASSPASSPASSCarbonizable Substance
1.4771.4741.47151.4711.4671.4661.46051.4755 Refractive Index, D20
143103.5757144.530.512.217.748Kinematic Viscosity, 40.0 cSt℃
-15.0-18.0-18.0-18.0-18.0-18.0-28.0-36Pour Point, ℃
280270266260250230202166Flash Point, C.O.C ℃
0.8680.8640.8580.8560.8470.8430.8350.822Specific Gravity, 15/4℃
3030303030303030Saybolt Color
ClearClearClearClearClearClearClearClearAppearance
FE-700FE-550FE-400FE-350FE-250FE-150FE-70FE-50ITEMS
ITEMS FL-550 FL-700 FL-900 FL-1100 FL-1300
Appearance Clear Clear Clear Clear Clear
Saybolt Color 30 30 30 30 30
Specific Gravity, 15/4℃ 0.864 0.873 0.8733 0.874 0.877
Flash Point, C.O.C ℃ 270 280 286 300 304
Pour Point, ℃ -18 -15 -9 -9 -6
Kinematic Viscosity, 40.0 cSt ℃ 103.5 143 173 210.5 235
Refractive Index, D20 1.474 1.4787 1.479 1.479 1.478
CHEMICAL RAW MATERIALS
White Mineral Oils
1)FDA(a) Grade
2)FDA(b) Grade
CHEMICAL RAW MATERIALS
Product Name
Appearance
CP ( )℃ HLB Application
NP - 2 Liquid <25 5.7 Emulsifier (W/O type)
NP - 3 Liquid <25 8.2 Moisture control
NP - 4 Liquid <25 8.9 Wetting, Dispersion
NP - 5 Liquid <25 10.5
NP - 6 Liquid <25 10.9
NP - 7 Liquid <25 11.7
NP - 8 Liquid 30 - 34 12.3 Emulsifier (W/O type)
NP - 9 Liquid 50 - 55 12.8 Penetrate, Cleaning
NP - 10 Liquid 65 - 69 13.3 Textile auxiliaries
NP - 11 Paste 72 - 76 13.7
NP - 12 Paste 79 - 84 13.9
NP - 13 Paste 87 - 91 14.4
NP - 15 Paste 92 - 98 15.0
NP - 20 Soild >100 16.0 Emulsifier (W/O type)
NP - 30 Flake >100 17.2 Emulsifier for emulsion
NP - 40 Flake >100 18.0 Stabilizer
NP - 50 Flake >100 18.2 Dispersing agent
NP - 100 Flake >100 19.1
◈ Textile industry
NP-3 ~ NP-20 : Spinning, dyeing application (bleaching, soaping agent)
NP-6 ~ NP-16 : Wetting, Dispersion, Cleaning
◈ Metal industry
NP-3 ~ NP-16 : Emulsifier for cutting oils
NP-8 ~ NP-16 : Grease remover, Cleaning Metal surface treatmenter
◈ Dyeing/Pigment
NP-6 ~ NP-8 : Emulsifier
NP-6 ~ NP-60 : Dispersion agent
◈ Synthetic resin
NP-20 ~ NP-100 : Dispersing emulsifier for emulsion polymerization
◈ Fertilizer
NP-6 ~ NP10 : Anti-scattering agent, Anti-caking agent
◈ Paper and Pulp
NP-5 ~ NP-12 : Pitch dispersing agent
NP-8 ~ NP-12 : Deiniking, Bleaching, Felt cleaning
◈ Rubber industry
NP-5 ~ NP-10 : Emulsifier for emulsion polymerization
◈ General detergent
NP-6 ~ NP-16 : Detergent base
Polyoxyethylene Nonylphenyl ether
CHEMICAL RAW MATERIALS
Polyoxyethylene Glycol
Dispersant, Emulsifier, Setting agent ◈ Agricultural chemicals
Viscosity controller, Absorption agent ◈ Ink industry
Antistatic, Plasticizer, Synthetic leather modifier, Base material for polyurethane, Special diol forpolyester synthesis
◈ Surfactant industry
Base material for cream, lnjection solvent, Emulsifier, Dispersant, Cleaner, Lubricant, Plasticizer ◈ Pharmaceuticals
Intermediate for cosmetics, Additives and base material for handcream shampoo, lotion ◈ Cosmetics
Shrinkage inhibitor, treatmenter for wood ◈ Wood industry
PEG-200,300,400 : Softener, wetting agent, PEG-1500 : Lubricant for calendering ◈ Paper industry
Rust inhibitor, additives for grease, lubricants ◈ Metal industry
Release agent for Rubber foam or Latex foam Release agent for Tire molding, Lubricants forextruder molding
◈ Rubber industry
Softener, Antistatic agent, Cleaner, Dispersant, Emulsifier, Dyeing auxiliaries, sizing agent ◈ Textile industry
Product name Appearance MW MP (℃) Application
PEG - 200 Liquid 190 - 210 <0℃ Dispersant, Emulsifier
PEG - 300 Liquid 285 - 315 <5℃ Dispersant, Emulsifier
PEG - 400 Liquid 380 - 420 4 - 8℃ Cosmetics, Dispersing
PEG - 600 Liquid 570 - 630 18 - 22℃ Lubricant, Electric coating
PEG - 1000 Solid 950 - 1050 35 - 39℃ Wetting
PEG - 1500 Solid 1300 - 1600 43 - 46℃ Softener, Tablet coating
PEG - 2000 Solid 1900 - 2100 49 - 53℃ Softener, Tablet coating
PEG - 4000 Flake 3000 - 3700 53 - 57℃ Cosmetics, Dispersant
PEG - 6000 Flake 6000 - 7000 56 - 61℃ Cosmetics, Dispersant
PEG - 8000 Flake 7000 - 9000 61 - 63℃
CHEMICAL RAW MATERIALS
Polyoxyethylene Alkyl Ether
Product name Appearance CP (℃) HLB Application
LA - 2 0.5max. - 6.2 Emulsifier for cosmetics / mineral oils
LA - 3 0.5 - 8.1 Base for Phosphate ester
LA - 5 0.5 <25 10.8
LA - 7 0.5 53 - 58 12.3 Emulsion, Wetting, Dyeing auxiliaries
LA - 9 0.5 78 - 82 13.4
OA - 5 0.5 <25 9.4 Mineral oil, Emulsifier, Defoamer
OA - 10 0.5 60 - 65 12.4 Emulsifier, Wetting, Cleaning
OA - 20 0.5 >100 15.4 Dyeing auxiliaries
CA - 3 0.5 - 7.1 Mineral Emulsifier (W/O type)
CA - 5 0.5 - 9.5
CA - 7 0.5 <25 11.2 Paraffin wax Emulsifier
CA - 10 0.5 73 - 79 12.9 Dyeing auxiliaries Emulsifier (cosmetics)
CA - 20 0.5 >100 15.7 Emulsion stabilizer (wax,latex)
SA - 2 0.5 - 5.5
SA - 7 0.5 - 10.7
SA - 15 0.5 - 15.0 Dyeing auxiliaries
SA - 20 0.5 - 15.3 Emulsifier for Ccometics (W/O type)
SA - 30 0.5 - 16.7 Emulsion stabilizer (wax,latex)
SC - 13 0.5 - 12.7
SC - 20 0.5 - 15.5
SC - 30 0.5 - 16.7
AMAZON PAPYRUS KOREA
HEAD OFFICE : 757-7,Bongsan-Dong, Yuseong-Gu, Daejeon,305-506,KOREA
TEL : +82 42 822 9551 FAX : +82 42 822 9552