CDRPanX USB Parts Location Guide

This guide is valid for CDRPanX Models B4792113 (115V) and B4792114 (230V)

Schick Technologies, Inc. 30-00 47th Avenue Long Island City, NY 11101 (718) 937-5765 (718) 937-5962 (fax) PART NUMBER B1051409 REV. –

Copyright © 2006 by Schick Technologies, Inc. All Rights Reserved

November 29, 2006

Printed in the United States of America

This document was originally prepared in English

CDR is a registered trademark of Schick Technologies, Inc and is covered by US Patent Numbers 5,912,942 and 6,134,298. Additional patents are pending.

Trademark designations used by other manufacturers and sellers may appear in this document also. Where Schick Technologies, Inc. was aware of a trademark claim, that information has been printed in caps or initial caps.

CDRPanX Parts Location Guide B1051409 Rev – i

Contents

1. Part Locations and Numbers.....................................................................1 1.1. Principal Assemblies...............................................................................................................1 1.2. Supports and Holders ..............................................................................................................2 1.3. Magnetic Brake System ..........................................................................................................3 1.4. Patient Positioning Elements ..................................................................................................4 1.5. Patient Handle Assembly ........................................................................................................5 1.6. Main Power Supply Components ...........................................................................................6 1.7. Regulation Unit Board / Control Unit.....................................................................................8 1.8. Multipole Cable Assembly .....................................................................................................9 1.9. X-ray Generator Assembly ...................................................................................................10 1.10. Power Switching Unit Board ................................................................................................11 1.11. iPan Interface Device and Driver and USB Cable ................................................................12 1.12. Image Sensor System Assembly (Includes Digital Cable 1) ................................................13 1.13. Digital Cable 2 and Digital Cable 3 Assemblies...................................................................14 1.14. Position Sensor PCB Assembly ............................................................................................15 1.15. Rotation Unit Motor with Gear.............................................................................................16 1.16. Counterweight Components..................................................................................................17 1.17. Mechanical Components.......................................................................................................18 1.18. Covers (Rotation Unit)..........................................................................................................19 1.19. Covers (Vertical Carriage) ....................................................................................................20 1.20. Accessories ...........................................................................................................................21

Index................................................................................................................... 22

ii B1051409 Rev – CDRPanX Parts Location Guide

List of Figures Figure 1. Principal External Assemblies ......................................................................................... 1 Figure 2. Patient Anatomical Supports and Self-Standing Base ..................................................... 2 Figure 3. Magnetic Brake System ................................................................................................... 3 Figure 4. Patient Alignment and Positioning Elements................................................................... 4 Figure 5. Patient Handle Assembly ................................................................................................. 5 Figure 6. Main Power Supply Components .................................................................................... 6 Figure 7. Fuse Set and Power Switch Components......................................................................... 7 Figure 8. Regulation Unit Board and Control Unit ......................................................................... 8 Figure 9. Multipole Cable Assembly............................................................................................... 9 Figure 10. X-ray Generator Assembly .......................................................................................... 10 Figure 11. Power Switching Unit Board ....................................................................................... 11 Figure 12. iPan Interface Device and Driver and USB Cable ....................................................... 12 Figure 13. Image Sensor System Assembly .................................................................................. 13 Figure 14. Digital Cable 2 and Digital Cable 3 Assemblies.......................................................... 14 Figure 15. Position Sensor PCB Assembly ................................................................................... 15 Figure 16. Rotation Unit Motor with Gear .................................................................................... 16 Figure 17. Counterweight Components......................................................................................... 17 Figure 18. Mechanical Components.............................................................................................. 18 Figure 19. Rotation Unit Covers ................................................................................................... 19 Figure 20. Vertical Carriage Covers.............................................................................................. 20 Figure 21. Accessories .................................................................................................................. 21

CDRPanX Parts Location Guide B1051409 Rev – 1

1. Part Locations and Numbers 1.1. Principal Assemblies

Refer to Figure 1 for a picture of principal external assemblies of the CDRPanX system.

Figure 1. Principal External Assemblies

Exposure Switch A4504700

Vertical Carriage Assembly B4792340 (115V) or B4792342 (230V)

Rotation Assembly B4792360

Column Assembly B4792310

2 B1051409 Rev – CDRPanX Parts Location Guide

1.2. Supports and Holders

Refer to Figure 2 for pictures of anatomical supports and holders used by the patient and the self-standing base for the system.

Location Parts

Bite Block A4505000 Chin Support A4504800 Chin Support Holder A4504900

Edentulous Lip Support A4505200 (Set of 2) TMJ / Sinus Lip Support A4505300 (Set of 2)

Lip Support Holder A4505100 Self Standing Base B4792220

Figure 2. Patient Anatomical Supports and Self-Standing Base

CDRPanX Parts Location Guide B1051409 Rev – 3

1.3. Magnetic Brake System

Refer to Figure 3 for pictures of the magnetic brake system.

Location Parts

Magnetic Brake Assembly A4501500

Magnetic Brake Pushbutton Switch A4506400

Vertical Side Bearing Assembly A4507600

Vertical Carriage Bearing A4506000

Additional View

Vertical Bearing Assembly A4507500

Figure 3. Magnetic Brake System

4 B1051409 Rev – CDRPanX Parts Location Guide

1.4. Patient Positioning Elements

Refer to Figure 4 for pictures of patient alignment and positioning elements.

Location Parts

(A)

Midsagittal Line Laser Module A4505900

(B)

Frankfort Laser Knob A4506800 Frankfort Line Laser Module A4505900

Frankfort Laser Mechanism A4509100

Additional View

(C)

Chin Rest Adjustment Knob A4506700 Lateral Line Laser Module A4505900

Figure 4. Patient Alignment and Positioning Elements

C

B

A

CDRPanX Parts Location Guide B1051409 Rev – 5

1.5. Patient Handle Assembly

Refer to Figure 5 for pictures of the Handle Assembly.

Location Parts

Handle Assembly A4506900

Handle Assembly A4506900

Figure 5. Patient Handle Assembly

6 B1051409 Rev – CDRPanX Parts Location Guide

1.6. Main Power Supply Components

Refer to Figure 7 for pictures of the Main Power Supply components.

Location Parts

Main Power Supply Location

DPS Power Supply Board A4501350

Low Voltage Transformer A4501750

Power Line Filter A4501760

Figure 6. Main Power Supply Components

CDRPanX Parts Location Guide B1051409 Rev – 7

Parts

Fuse Set 230 VAC A4505700

Location

Fuse Set and Power Switch Location

Fuse Set 115 VAC A4505600

Fuse Holder 5x20mm (230V) A4507100

Fuse Holder 6.3x32mm (115V) A4507200

Main Power Switch A4501800

Figure 7. Fuse Set and Power Switch Components

8 B1051409 Rev – CDRPanX Parts Location Guide

1.7. Regulation Unit Board / Control Unit

Refer to Figure 8 for pictures of the Regulation Unit Board and the Control Unit.

Location Parts

Regulation Unit Board A4503900

Additional View

Control Unit B4792480

Figure 8. Regulation Unit Board and Control Unit

CDRPanX Parts Location Guide B1051409 Rev – 9

1.8. Multipole Cable Assembly

Refer to Figure 9 for a picture of the Multipole Cable Assembly.

Location Parts

Multipole Cable Assembly A4507010

Figure 9. Multipole Cable Assembly

10 B1051409 Rev – CDRPanX Parts Location Guide

1.9. X-ray Generator Assembly

Refer to Figure 10 for a picture of the X-ray Generator Assembly (B4792400).

Location Parts

X-ray Tube Housing Assembly A4504600 X-ray Collimator B4792500

Figure 10. X-ray Generator Assembly

CDRPanX Parts Location Guide B1051409 Rev – 11

1.10. Power Switching Unit Board

Refer to Figure 11 for a picture of the Power Switching Unit Board.

Location Parts

Power Switching Unit Board A4504000

Figure 11. Power Switching Unit Board

12 B1051409 Rev – CDRPanX Parts Location Guide

1.11. iPan Interface Device and Driver and USB Cable

Refer to Figure 12 for a picture of the USB cable, iPan Interface Device and driver.

Parts

iPan USB Interface B4800140

USB Cable (1 Meter) (A-to-B Type) A1120100

iPan USB Interface Driver CD-ROM B1030164

Figure 12. iPan Interface Device and Driver and USB Cable

CDRPanX Parts Location Guide B1051409 Rev – 13

1.12. Image Sensor System Assembly (Includes Digital Cable 1)

Refer to Figure 13 for a picture of the Image Sensor System Assembly.

Figure 13. Image Sensor System Assembly

Location Parts

PanX USB Data Cable 1 (5 ft) A1122600

PanX USB Power Supply Assembly B4890250

PanX USB Image Sensor Module B4890200

PanX USB Sensor System Assembly B4890100

14 B1051409 Rev – CDRPanX Parts Location Guide

1.13. Digital Cable 2 and Digital Cable 3 Assemblies

Refer to Figure 14 for pictures of the Digital Cable 2 and Digital Cable 3 assemblies.

Location Parts

(A) PanX USB Data Cable 2 (3 ft) A1122500

RJ-45 Coupler, 8x8 Straight A1640000

(B) Digital Cable 3 Assembly (Cat-5e) (25 ft) A1122700

Figure 14. Digital Cable 2 and Digital Cable 3 Assemblies

A

B

CDRPanX Parts Location Guide B1051409 Rev – 15

1.14. Position Sensor PCB Assembly

Refer to Figure 15 for a picture of the Position Sensor PCB Assembly.

Location Parts

Position Sensor PCB Assembly A4503800

Figure 15. Position Sensor PCB Assembly

16 B1051409 Rev – CDRPanX Parts Location Guide

1.15. Rotation Unit Motor with Gear

Refer to Figure 16 for pictures of the Rotation Unit Motor with Gear.

Location Parts

Rotation Unit with Gear A4503700

Installed Rotation Unit with Gear and Position Sensor PCB Assembly

Figure 16. Rotation Unit Motor with Gear

CDRPanX Parts Location Guide B1051409 Rev – 17

1.16. Counterweight Components

Refer to Figure 17 for pictures of the Counterweight components.

Location Parts

Counterweight Cables (2) A4500300

Counterweight Roller Guide A4500400

Counterweight Cable Holder Assembly A4508200

Adjustment Counterweight Assembly A4505400

Figure 17. Counterweight Components

18 B1051409 Rev – CDRPanX Parts Location Guide

1.17. Mechanical Components

Refer to Figure 18 for pictures of mechanical components.

Location Parts

Cam Shaft Assembly A4506300

Figure 18. Mechanical Components

CDRPanX Parts Location Guide B1051409 Rev – 19

1.18. Covers (Rotation Unit)

Refer to Figure 19 for pictures of Rotation Unit covers.

Figure 19. Rotation Unit Covers

Location

B4792492 Switcher Cover

B4792490 Drive Cover Assembly

B4792496 Head Cover Outer Assembly

B4792495 Head Cover Inner Assembly

B4792572 Cable Tube Cover

B4792494 Sensor Cover Assembly

B4792493 Display Cover

20 B1051409 Rev – CDRPanX Parts Location Guide

1.19. Covers (Vertical Carriage)

Refer to Figure 20 for pictures of Vertical Carriage covers.

Figure 20. Vertical Carriage Covers

Location

A4507700 Upper Top Cover

A4507800 Upper Bottom Cover

A4508100 Positioning Mirror

A4507900 Vertical Mid Cover

A4508000 Vertical Lower Cover

CDRPanX Parts Location Guide B1051409 Rev – 21

1.20. Accessories

Refer to Figure 21 for pictures of Accessories.

Figure 21. Accessories

Location

Ball /Pin Phantom A4501400

Exposure Switch Extension A4506100

Head Support A4506200

22 B1051409 Rev – CDRPanX Parts Location Guide

Index

A Adjustment Counterweight Assembly, 17

B Ball / Pin Phantom, 21 Bite Block, 2

C Cable Tube Cover, 19 Cam Shaft Assembly, 18 CDRPanX

Introduction, 1 Chin Support, 2 Chin Support Holder, 2 Column Assembly, 1 Control Unit, 8 Counterweight Cable Holder Assembly, 17 Counterweight Cables, 17 Counterweight Roller Guide, 17

D Digital Cable 1 Assembly (CAT-5e), 13 Digital Cable 2 Assembly (CAT-5e), 14 Digital Cable 3 Assembly (CAT-5e), 14 DPS Power Supply Board, 6 Drive Cover, 19

E Edentulous Lip Support, 2 Exposure Switch, 1 Exposure Switch Extension, 21

F Frankfort Laser Knob, 4 Frankfort Line Laser Module, 4 Fuse Holder 5x20mm, 7 Fuse Holder 6.3x20mm, 7 Fuse Set 115 VAC, 7 Fuse Set 230 VAC, 7

H Handle Assembly, 5 Head Cover Outer, 19 Head Support, 21

I iPan USB Interface Assembly, 12 iPan USB Interface Driver CD-ROM, 12

L Lateral Laser Knob, 4 Lateral Line Laser Module, 4 Lip Support Holder, 2 Low Voltage Transformer, 6

M Magnetic Brake Assembly, 3 Magnetic Brake Pushbutton Switch, 3 Main Power Switch, 7 Midsagittal Line Laser Module, 4 Multipole Cable Assembly, 9

P Panoramic Imaging Areas

Picture of, 1 PanX USB Image Sensor Assembly, 13 PanX USB Power Supply Assembly, 13 PanX USB Sensor System Assembly, 13 PanX-C Rotation Unit Head Cover Inner, 19 Position Sensor PCB Assembly, 15 Positioning Mirror, 20 Power Line Filter, 6 Power Switching Unit Board, 11

R Regulation Unit Board, 8 Rotation Assembly, 1 Rotation Unit with Gear, 16 Rotation Unit with Gear and Position Sensor PCB

Assembly, 16

S Self Standing Base, 2 Sensor Cover, 19 Switcher Cover, 19

T TMJ / Sinus Lip Support, 2

U Upper Bottom Cover, 20 Upper Top Cover, 20 USB Cable, 12

V Vertical Carriage Assembly, 1 Vertical Carriage Bearing, 3

CDRPanX Parts Location Guide B1051409 Rev – 23

Vertical Lower Cover, 20 Vertical Mid Cover, 20 Vertical Side Bearing Assembly, 3

X X-ray Generator Assembly, 10