1

FANUC iHMI Human Machine Interface

2

FANUC Operating Panels PANEL iH / iH Pro

3

PANEL iH

Display unit with Microsoft Windows Compact 7 for CNC of 30i series MODEL B iHMI as user interface

4

CNC LCD-mounted

CNC Stand-Alone

HSSB

CPU ARM

Main Memory 1GB

Storage device Compact Flash Card 2-16GB

I/O 2x USB 2.0 2x Serial-Port (RS-232-C) 100BASE-TX PCMCIA

Extend slot PCI-Express 2-slots

O/S Windows Embedded Compact7

PANEL iH Hardware specifications

5

PANEL iH Pro

Display unit with PC function Microsoft Windows Embedded 7 for CNC of 30i series MODEL B iHMI as user interface HSSB connection to CNC only

6

CNC Stand-Alone

HSSB

CPU 4th Generation Core i (i5-4400E with HD4600 Graphic) 4th Generation Celeron 2.2GHz

Main Memory up to 8GB DDR3 SO-DIMM

Storage device High speed SSD 8-128GB HDD 512GB

I/O 2x USB 2.1 2x USB 3.0 1Gb Ethernet (2nd Ethernet port optional) PCMCIA

Extend slot PCI-Express 2-slots

O/S Windows Embedded Standard 7

PANEL iH Pro PC specifications

7

PANEL iH/iH Pro Line-up

15” Metallic frame 21.5” wide 10.4” 15” 19”

PANEL iH - - O O O

PANEL iH Pro O O O O O

Dedicated MDI O - O O O

Dedicated MOP - - O O O

8

Screen specifications

9

15” Metallic frame 21.5” wide 10.4” 15” 19”

Touch panel O

Resistive type 2-point touch

O Capacitive type

Multi-touch

O (no softkey) Resistive type

O (no softkey) Resistive type 2-point touch

O (no softkey) Resistive type 2-point touch

Soft key O - O (no touch) O (no touch) O (no touch)

Screen resolution

XGA (1024x768)

4:3

FullHD (1920x1080)

16:9

XGA (1024x768)

4:3

XGA (1024x768)

4:3

SXGA (1280x1024)

5:4

Width[mm] 400 330 290 400 500

FANUC iHMI Concept

13

New iHMI Concept Unique HMI for all machines. Consistent support on shop floor.

14

PLANNING • tool manager • cycle time estimation • compatible with CAD/CAM

MACHINING • CNC operation • machine collision avoidance • Machining Simulation • Machining & Measurement Cycle • robot operation

IMPROVEMENT • maintenance manager • data logger • servo viewer

SHOP FLOOR OPERATION

Intuitive Home Screen

15

CNC operation screen

Tool manager

Machine collision avoidance

Maintenance manager Data logger

Manuel viewer Former design still available for machine set-up purpose

Cycle Time Estimation

SIMPLE Easy operation along process flow

GRAPHICAL Intuitive icons and

high-visibility design

FRIENDLY Help troubleshooting

Easy programing and machining

16

SIMPLE Easy operation along process flow with integration of three main screens automatically switched according to the active mode

17

CONVENIENT PROGRAMMING EFFICIENT MACHINING EASY SET UP

EDITING MODE MANUAL OPERATION MODE AUTOMATIC MODE

GRAPHICAL All in one screen during NC operation Machining program list with icons (pre-view) Graphic interface to set work coordinates Easy tool-data management

18

FRIENDLY Troubleshooting Screen for fast problem solving

Customized Diagnostic

Results &

Countermeasures Guidance

19

FANUC iHMI CNC Operation improvement

20

Tool change guidance function

iHMI CNC Operation improvement (1/3)

• Easy tool change by just entering the tool number • Tool change program and guidance map can be customized according to machine

Enter the tool number according

to the guidance

Tool change with cycle start button

Ease of Use

30i/31i/32i-B

Features

21

• Easy to set the workpiece coordinate system by touching each end face of the workpiece • The midpoint of two points, the center of a circle passing through 3 points or 4 points can also

be calculated

Easy insert current value with one button

Center of the circle can also be calculated

Features

iHMI CNC Operation improvement (2/3)

Workpiece measurement function

Ease of Use

30i/31i/32i-B

22

Enter tool and cutting conditions

• Calculate recommended feed speed / spindle speed from tool information and work material • Calculation result can be inserted into program

Calculation result

Insert program

Features

iHMI CNC Operation improvement (3/3)

Cutting condition calculation function

Ease of Use

30i/31i/32i-B

23

24

FANUC iHMI Machining / Measuring

Cycles

Various Cycles

A

Milling Cycles (40 kinds)

Turning Cycles (40 kinds)

Measurement Cycles Set-up Guidance (42 kinds)

Ease of Use

30i/31i/32i-B

25

Machining Cycle Operation

• Select a machining cycle category Milling/Turning (Hole, Face, Contouring / Turning, Threading)

• Enter cycle data (Feed rate, Cutting direction, Approach motion)

• Select geometry cycle (Figure, Length, Start Point, Center Coo.)

• Enter geometry cycle data (Cut Depth, Finishing Amount, Residual Amount)

Machining Cycles

26

Ease of Use

30i/31i/32i-B

Measuring Cycle Operation

• Select a cycle type (Tool, Calibration, Work-set, Part Check)

• Enter data for the cycle (Coordinates, Approach, Feed)

• Measure

Measuring Cycles

27

Ease of Use

30i/31i/32i-B

Check program and cycles graphically

Graphic Program Check

28

Animation graphic Tool path graphic

Ease of Use

30i/31i/32i-B

Check program and cycles graphically

Graphic Program Check

29

Ease of Use

30i/31i/32i-B

30

FANUC iHMI Machining Simulation

Features

• Supporting simultaneous 5-axis machining and compound machining • Supporting transparent display, simultaneous display of 3D model and tool path

Simultaneous display of 3D model and tool path

Transparent display

iHMI New Machining Simulation (1/2)

Easy detection of programing mistake by high-precision simulation

Ease of Use

30i/31i/32i-B

31

• Multiform clash detection • Measurement distance and time of air cutting…etc., supporting various functions for program check

Tool - Workpiece Holder - workpiece Shank - workpiece

etc.

Total of Air cutting 500mm

30s

Air cutting

iHMI New Machining Simulation (2/2)

Easy detection of programing mistake by high-precision simulation

Ease of Use

30i/31i/32i-B

Features

32

33

FANUC iHMI Tool Manager

iHMI Tool Manager

34

Tool Maker

+HMI

iHMI

Tool Manager

Tool Library Software

Note) MachiningCloud is a trademark registration of MachiningCloud GmbH.

iHMI Tool Manager (1/3)

Tool data provided by MachiningCloud can be imported

Ease of Use

30i/31i/32i-B

35

iHMI

Tool Manager Tool presetter

The format of FANUC

X--- Z---

iHMI Tool Manager (2/3)

Tool offset data provided by the tool presetter can be imported

Ease of Use

30i/31i/32i-B

36

+HMI

Each functions on CNC

Tool Compensation

Tool Management / Tool Life Management

Machining Simulation

iHMI Tool Manager

Machine Collision Avoidance …

iHMI Tool Manager (3/3)

Cooperation with Machine Collision Avoidance and each functions on CNC is available

Ease of Use

30i/31i/32i-B

37

iHMI Tool Manager (export from Machiningcloud)

Ease of Use

30i/31i/32i-B

38

iHMI Tool Manager (import in new iHMI)

Ease of Use

30i/31i/32i-B

39

40

FANUC iHMI Machine Collision Avoidance

• Precise collision detection by forecasted positions and 3 dimensional machine model

• The attachment exchange etc. can be controlled by using the PMC data

• Tool data outputted by the Tool Manager is available.

Note : FANUC PANEL iH Pro is required.

iHMI Machine Collision Avoidance

Machine Collision Avoidance function using CGTech simulation software

Ease of Use

30i/31i/32i-B

Features

41

iHMI Machine Collision Avoidance

42

Ease of Use

30i/31i/32i-B

43

FANUC iHMI Servo Viewer

• Waveform display tool for observing axes motion and CNC process on CNC screen • Support optimizing program to reduce cycle time and optimize cutting condition

Support of reducing cycle time

Measurement of waveforms

Optimize machining program and cutting

condition

• Measurement by a trigger • Export to CSV file

iHMI SERVO VIEWER

Ease of Use

30i/31i/32i-B

44

45

FANUC iHMI Cycle Time Estimation

Support the machining schedule by estimating cycle time

Cycle Time Estimation is an option function to estimate the cycle time of a machining program.

iHMI Cycle Time Estimation

• Support to both lathe and machining system

• Support to FS32i-B

• Estimation accuracy is within ±5%

• Time to estimate is 1/20 of machining

• High accuracy estimation is possible by setting time of auxiliary code

• Strong support to complex mold machining

Note : FANUC PANEL iH Pro is required.

Ease of Use

30i/31i/32i-B

Features

46

www.fanuc.eu

We reserve the right to make technical changes without prior announcement. All rights reserved. © 2016 FANUC Europe Corporation www.fanuc.eu

47