Panan Main1 Rio_omicron

panan main1 rio.adt:

Test Object - Device Settings

Substation/Bay:Substation: Substation Substation address: LocationBay: bay Bay address: bay address

Device:Name/description: Multilin D60 Manufacturer: GEDevice type: Line Distance Protection Device address: device addressSerial/model number: serial no.Additional info 1: Protected object nameAdditional info 2: D60-N03-HLH-F8L-H6P-M6K-

PXX-UXX-WXX

Nominal Values:f nom: 50.00 Hz Number of phases: 3V nom (secondary): 115.0 V V primary: 400.0 kVI nom (secondary): 1.000 A I primary: 1.200 kA

Residual Voltage/Current Factors:VLN / VN: 1.732 IN / I nom: 1.000

Limits:V max: 500.0 V I max: 50.00 A

Debounce/Deglitch Filters:Debounce time: 3.000 ms Deglitch time: 0.000 s

Overload Detection:Suppression time: 50.00 ms

Test Object - Custom Settings

GE Multilin D60 \ Relay Parameter Section \ Device Definition Description Name ValueOrder Code () Order Code () D60-E09-HCH-F8F-

H4L-M8F-P4L-UXX-W\XXX

Version () Version () 5.5xDescription () Description () D60Interface () Interface () COM1: 19200 N 8 1

GE Multilin D60 \ Relay Parameter Section \ System Setup \ AC Inputs \ Current \ CT F1 Description Name ValuePhase CT Primary (A) Phase CT Primary (A) 1200 APhase CT Secondary (A) Phase CT Secondary (A) 1 AGround CT Primary (A) Ground CT Primary (A) 1200 AGround CT Secondary (A) Ground CT Secondary (A) 1 A

GE Multilin D60 \ Relay Parameter Section \ System Setup \ AC Inputs \ Voltage \ VT F5 Description Name ValuePhase VT Connection () Phase VT Connection () WyePhase VT Secondary (V) Phase VT Secondary (V) 66.4 VPhase VT Ratio () Phase VT Ratio () 3478.00 :1Auxilliary VT Connection () Auxilliary VT Connection () VagAuxilliary VT Secondary (V) Auxilliary VT Secondary (V) 66.4 VAuxilliary VT Ratio () Auxilliary VT Ratio () 120 : 1

GE Multilin D60 \ Relay Parameter Section \ System Setup \ Power System Description Name ValueNominal Frequency (Hz) Nominal Frequency (Hz) 50 HzPhase Rotation () Phase Rotation () ABCFrequency And Phase Reference () Frequency And Phase

Reference ()SRC 1

Frequency Tracking Function () Frequency Tracking Function () Enabled

GE Multilin D60 \ Relay Parameter Section \ System Setup \ Signal Sources \ Source 1 Description Name ValueName () Name () SRC 1Phase CT () Phase CT () F1Ground CT () Ground CT () F1Phase VT () Phase VT () F5Auxiliary VT () Auxilliary VT () F5

GE Multilin D60 \ Relay Parameter Section \ System Setup \ Signal Sources \ Source 2 Description Name ValueName () Name () SRC 2Phase CT () Phase CT () NoneGround CT () Ground CT () NonePhase VT () Phase VT () NoneAuxiliary VT () Auxilliary VT () None

GE Multilin D60 \ Relay Parameter Section \ System Setup \ Breakers Description Name ValueBreaker 1 Function () Breaker 1 Function () EnabledBreaker 1 Push Button Control () Breaker 1 Push Button Control

()Disabled

Breaker 1 Name () Breaker 1 Name () Bkr 1Breaker 1 Mode () Breaker 1 Mode () 3-PoleBreaker 1 Toperate (s) Breaker 1 Toperate (s) 0.050 sBreaker 1 Alarm Delay (s) Breaker 1 Alarm Delay (s) 0.000 sBreaker 1 Manual Close Recal Time (s) Breaker 1 Manual Close Recal

Time (s)0.000 s

Breaker 1 Events () Breaker 1 Events () DisabledBreaker 2 Function () Breaker 2 Function () DisabledBreaker 2 Push Button Control () Breaker 2 Push Button Control

()Disabled

Breaker 2 Name () Breaker 2 Name () Bkr 2Breaker 2 Mode () Breaker 2 Mode () 3-PoleBreaker 2 Toperate (s) Breaker 2 Toperate (s) 0.070 sBreaker 2 Alarm Delay (s) Breaker 2 Alarm Delay (s) 0.000 sBreaker 2 Manual Close Recal Time (s) Breaker 2 Manual Close Recal

Time (s)0.000 s

Breaker 2 Events () Breaker 2 Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Line Pickup Description Name ValueFunction () Function () DisabledSignal Source () Signal Source () SRC 1Phase IOC Line Pickup (pu) Phase IOC Line Pickup (pu) 1.200 puUV Pickup (pu) UV Pickup (pu) 0.600 puLine End Open Pickup Delay (s) Line End Open Pickup Delay

(s)0.150 s

Line End Open Reset Delay (s) Line End Open Reset Delay (s) 0.090 sOV Pickup Delay (s) OV Pickup Delay (s) 0.040 sAutoreclose Coordination Bypass () Autoreclose Coordination

Bypass ()Enabled

Autoreclose Coordination Pickup Delay (s) Autoreclose Coordination Pickup Delay (s)

0.045 s

Autoreclose Coordination Reset Delay (s) Autoreclose Coordination Reset Delay (s)

0.005 s

Distance Trip () Distance Trip () DisabledTarget () Target () Self-resetEvents () Events () Enabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Distance \ Distance Description Name ValueSource () Source () SRC 1Memory Duration (cy) Memory Duration (cy) 10 cy

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Distance \ Phase Distance \ Phase Distance Z1 Description Name ValueFunction () Function () EnabledDirection () Direction () ForwardShape () Shape () MhoXfmr Vol Connection () Xfmr Vol Connection () NoneXfmr Curr Connection () Xfmr Curr Connection () NoneReach (Ohms) Reach (Ohms) 4.10 OhmRCA () RCA () 79 Rev Reach (Ohms) Rev Reach (Ohms) 2.00 OhmRev Reach RCA () Rev Reach RCA () 85 Comp Limit () Comp Limit () 90 DIR RCA () DIR RCA () 90 DIR Comp Limit () DIR Comp Limit () 90 Quad Right Blinder (Ohms) Quad Right Blinder (Ohms) 0.02 OhmQuad Right Blinder RCA () Quad Right Blinder RCA () 85.00 Quad Left Blinder (Ohms) Quad Left Blinder (Ohms) 0.02 OhmQuad Left Blinder RCA () Quad Left Blinder RCA () 79.00 Supervision (pu) Supervision (pu) 0.200 puVolt Level (pu) Volt Level (pu) 0.000 puDelay (s) Delay (s) 0.000 sBlock () Block () SRC1 VT FUSE FAIL

OPTarget () Target () LatchedEvents () Events () Enabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Distance \ Phase Distance \ Phase Distance Z4 Description Name ValueFunction () Function () EnabledDirection () Direction () ReverseShape () Shape () MhoXfmr Vol Connection () Xfmr Vol Connection () NoneXfmr Curr Connection () Xfmr Curr Connection () NoneReach (Ohms) Reach (Ohms) 0.41 OhmRCA () RCA () 79 Rev Reach (Ohms) Rev Reach (Ohms) 1.00 OhmRev Reach RCA () Rev Reach RCA () 85 Comp Limit () Comp Limit () 90 DIR RCA () DIR RCA () 90 DIR Comp Limit () DIR Comp Limit () 90 Quad Right Blinder (Ohms) Quad Right Blinder (Ohms) 0.02 OhmQuad Right Blinder RCA () Quad Right Blinder RCA () 79.00 Quad Left Blinder (Ohms) Quad Left Blinder (Ohms) 0.02 OhmQuad Left Blinder RCA () Quad Left Blinder RCA () 79.00 Supervision (pu) Supervision (pu) 0.200 puVolt Level (pu) Volt Level (pu) 0.000 puDelay (s) Delay (s) 1.000 sBlock () Block () SRC1 VT FUSE FAIL


GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Distance \ Phase Distance \ Phase Distance Z5 Description Name ValueFunction () Function () DisabledDirection () Direction () Non-directionalShape () Shape () QuadXfmr Vol Connection () Xfmr Vol Connection () NoneXfmr Curr Connection () Xfmr Curr Connection () NoneReach (Ohms) Reach (Ohms) 15.00 OhmRCA () RCA () 90 Rev Reach (Ohms) Rev Reach (Ohms) 15.00 OhmRev Reach RCA () Rev Reach RCA () 90 Comp Limit () Comp Limit () 90 DIR RCA () DIR RCA () 85 DIR Comp Limit () DIR Comp Limit () 90 Quad Right Blinder (Ohms) Quad Right Blinder (Ohms) 15.00 OhmQuad Right Blinder RCA () Quad Right Blinder RCA () 90.00 Quad Left Blinder (Ohms) Quad Left Blinder (Ohms) 15.00 OhmQuad Left Blinder RCA () Quad Left Blinder RCA () 90.00 Supervision (pu) Supervision (pu) 0.200 puVolt Level (pu) Volt Level (pu) 0.000 puDelay (s) Delay (s) 1.600 sBlock () Block () Virt Op 2 On (VO2)Target () Target () Self-resetEvents () Events () Enabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Distance \ Ground Distance \ Ground Distance Z1 Description Name ValueFunction () Function () EnabledDirection () Direction () ForwardShape () Shape () MhoZ0/Z1 Mag () Z0/Z1 Mag () 3.31 Z0/Z1 Ang () Z0/Z1 Ang () 2 Z0M Z1 Mag () Z0M Z1 Mag () 0.00 Z0M Z1 Ang () Z0M Z1 Ang () 0 Reach (Ohms) Reach (Ohms) 4.10 OhmRCA () RCA () 79 Rev Reach (Ohms) Rev Reach (Ohms) 2.00 OhmRev Reach RCA () Rev Reach RCA () 85 POL Current () POL Current () Neg-seqNon-Homogen Ang () Non-Homogen Ang () -5.0 Comp Limit () Comp Limit () 90 DIR RCA () DIR RCA () 90 DIR Comp Limit () DIR Comp Limit () 90 Quad Right Blinder (Ohms) Quad Right Blinder (Ohms) 0.02 OhmQuad Right Blinder RCA () Quad Right Blinder RCA () 79.00 Quad Left Blinder (Ohms) Quad Left Blinder (Ohms) 0.02 OhmQuad Left Blinder RCA () Quad Left Blinder RCA () 85.00 Supervision (pu) Supervision (pu) 0.200 puVolt Level (pu) Volt Level (pu) 0.000 puDelay (s) Delay (s) 0.000 sBlock () Block () SRC1 VT FUSE FAIL


GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Distance \ Ground Distance \ Ground Distance Z4 Description Name ValueFunction () Function () EnabledDirection () Direction () ReverseShape () Shape () MhoZ0/Z1 Mag () Z0/Z1 Mag () 3.31 Z0/Z1 Ang () Z0/Z1 Ang () 2 Z0M Z1 Mag () Z0M Z1 Mag () 0.00 Z0M Z1 Ang () Z0M Z1 Ang () 0 Reach (Ohms) Reach (Ohms) 0.41 OhmRCA () RCA () 85 Rev Reach (Ohms) Rev Reach (Ohms) 90.00 OhmRev Reach RCA () Rev Reach RCA () 85 POL Current () POL Current () Neg-seqNon-Homogen Ang () Non-Homogen Ang () -5.0 Comp Limit () Comp Limit () 90 DIR RCA () DIR RCA () 85 DIR Comp Limit () DIR Comp Limit () 90 Quad Right Blinder (Ohms) Quad Right Blinder (Ohms) 10.00 OhmQuad Right Blinder RCA () Quad Right Blinder RCA () 85.00 Quad Left Blinder (Ohms) Quad Left Blinder (Ohms) 10.00 OhmQuad Left Blinder RCA () Quad Left Blinder RCA () 85.00 Supervision (pu) Supervision (pu) 0.200 puVolt Level (pu) Volt Level (pu) 0.000 puDelay (s) Delay (s) 1.000 sBlock () Block () SRC1 VT FUSE FAIL


GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Distance \ Ground Distance \ Ground Distance Z5 Description Name ValueFunction () Function () DisabledDirection () Direction () Non-directionalShape () Shape () QuadZ0/Z1 Mag () Z0/Z1 Mag () 4.00 Z0/Z1 Ang () Z0/Z1 Ang () 0 Z0M Z1 Mag () Z0M Z1 Mag () 0.00 Z0M Z1 Ang () Z0M Z1 Ang () 0 Reach (Ohms) Reach (Ohms) 15.00 OhmRCA () RCA () 90 Rev Reach (Ohms) Rev Reach (Ohms) 15.00 OhmRev Reach RCA () Rev Reach RCA () 90 POL Current () POL Current () Neg-seqNon-Homogen Ang () Non-Homogen Ang () 0.0 Comp Limit () Comp Limit () 90 DIR RCA () DIR RCA () 85 DIR Comp Limit () DIR Comp Limit () 90 Quad Right Blinder (Ohms) Quad Right Blinder (Ohms) 15.00 OhmQuad Right Blinder RCA () Quad Right Blinder RCA () 90.00 Quad Left Blinder (Ohms) Quad Left Blinder (Ohms) 15.00 OhmQuad Left Blinder RCA () Quad Left Blinder RCA () 90.00 Supervision (pu) Supervision (pu) 0.200 puVolt Level (pu) Volt Level (pu) 0.000 puDelay (s) Delay (s) 1.700 sBlock () Block () SRC1 VT FUSE FAIL

OPTarget () Target () Self-resetEvents () Events () Enabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Power Swing Detect Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Shape () Shape () Mho ShapeMode () Mode () Two StepSupv (pu) Supv (pu) 0.600 puFwd Reach (Ohms) Fwd Reach (Ohms) 50.00 OhmQuad Fwd Mid (Ohms) Quad Fwd Mid (Ohms) 60.00 OhmQuad Fwd Out (Ohms) Quad Fwd Out (Ohms) 70.00 OhmFwd Rca () Fwd Rca () 75.0 Rev Reach (Ohms) Rev Reach (Ohms) 50.00 OhmQuad Rev Mid (Ohms) Quad Rev Mid (Ohms) 60.00 OhmQuad Rev Out (Ohms) Quad Rev Out (Ohms) 70.00 OhmRev Rca () Rev Rca () 75.0 Outer Limit Angle () Outer Limit Angle () 120 Middle Limit Angle () Middle Limit Angle () 90 Inner Limit Angle () Inner Limit Angle () 60 Outer Rgt Bld (Ohms) Outer Rgt Bld (Ohms) 100.00 OhmOuter Lft Bld (Ohms) Outer Lft Bld (Ohms) 100.00 OhmMiddle Rgt Bld (Ohms) Middle Rgt Bld (Ohms) 100.00 OhmMiddle Lft Bld (Ohms) Middle Lft Bld (Ohms) 100.00 OhmInner Rgt Bld (Ohms) Inner Rgt Bld (Ohms) 100.00 OhmInner Lft Bld (Ohms) Inner Lft Bld (Ohms) 100.00 OhmDelay 1 Pickup (s) Delay 1 Pickup (s) 0.030 sDelay 1 Reset (s) Delay 1 Reset (s) 0.050 sDelay 2 Pickup (s) Delay 2 Pickup (s) 0.017 sDelay 3 Pickup (s) Delay 3 Pickup (s) 0.009 sDelay 4 Pickup (s) Delay 4 Pickup (s) 0.017 sSeal-In Delay (s) Seal-In Delay (s) 0.400 sTrip Mode () Trip Mode () DelayedBlock () Block () OFFTarget () Target () Self-resetEvent () Event () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Load Encroachment Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Min Volt (pu) Min Volt (pu) 0.250 puReach (Ohms) Reach (Ohms) 12.00 OhmAngle () Angle () 45 Pickup Delay (s) Pickup Delay (s) 0.000 Reset Delay (s) Reset Delay (s) 0.000 Block () Block () OFFTarget () Target () Self-resetEvents () Events () Enabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Phase Current \ Phase TOC \ Phase TOC 1 Description Name ValueFunction () Function () EnabledSource () Source () SRC 1Input () Input () RMSPickup () Pickup () 1.200 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.20 Reset () Reset () TimedVoltage Restraint () Voltage Restraint () DisabledBlock A () Block A () OFFBlock B () Block B () OFFBlock C () Block C () OFFTarget () Target () Self-resetEvents () Events () Enabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Phase Current \ Phase TOC \ Phase TOC 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Input () Input () PhasorPickup () Pickup () 1.000 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.00 Reset () Reset () InstantaneousVoltage Restraint () Voltage Restraint () DisabledBlock A () Block A () OFFBlock B () Block B () OFFBlock C () Block C () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Phase Current \ Phase IOC \ Phase IOC 1 Description Name ValueFunction () Function () EnabledSource () Source () SRC 1Pickup () Pickup () 5.000 puDelay (s) Delay (s) 0.05 sReset Delay () Reset Delay () 0.00 sBlock A () Block A () OFFBlock B () Block B () OFFBlock C () Block C () OFFTarget () Target () Self-resetEvents () Events () Enabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Phase Current \ Phase IOC \ Phase IOC 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puDelay (s) Delay (s) 0.00 sReset Delay () Reset Delay () 0.00 sBlock A () Block A () OFFBlock B () Block B () OFFBlock C () Block C () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Phase Current \ Phase Directional \ Phase DIR1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Block () Block () OFFECA () ECA () 30 Pol V Threshold () Pol V Threshold () 0.700 puBlock when V Men Exp () Block when V Men Exp () NoTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Phase Current \ Phase Directional \ Phase DIR2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Block () Block () OFFECA () ECA () 30 Pol V Threshold () Pol V Threshold () 0.700 puBlock when V Men Exp () Block when V Men Exp () NoTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Neutral Current \ Neutral TOC \ Neutral TOC 1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Input () Input () PhasorPickup () Pickup () 1.000 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.00 Reset () Reset () InstantaneousBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Neutral Current \ Neutral TOC \ Neutral TOC 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Input () Input () PhasorPickup () Pickup () 1.000 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.00 Reset () Reset () InstantaneousBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Neutral Current \ Neutral IOC \ Neutral IOC 1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puDelay (s) Delay (s) 0.00 sReset Delay () Reset Delay () 0.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Neutral Current \ Neutral IOC \ Neutral IOC 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puDelay (s) Delay (s) 0.00 sReset Delay () Reset Delay () 0.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Neutral Current \ Neutral Directional OC \ Neutral DIR OC1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Polarizing () Polarizing () VoltagePolarizing Volt () Polarizing Volt () Calculated V0Op Current () Op Current () Calculated 3I0POS SEQ Restraint () POS SEQ Restraint () 0.063 Offset (Ohms) Offset (Ohms) 0.00 OhmForward ECA () Forward ECA () 75 Forward Limit Angle () Forward Limit Angle () 90 Forward Pickup () Forward Pickup () 0.050 puReverse Limit Angle () Reverse Limit Angle () 90 Reverse Pickup () Reverse Pickup () 0.050 puBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Neutral Current \ Neutral Directional OC \ Neutral DIR OC2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Polarizing () Polarizing () VoltagePolarizing Volt () Polarizing Volt () Calculated V0Op Current () Op Current () Calculated 3I0POS SEQ Restraint () POS SEQ Restraint () 0.063 Offset (Ohms) Offset (Ohms) 0.00 OhmForward ECA () Forward ECA () 75 Forward Limit Angle () Forward Limit Angle () 90 Forward Pickup () Forward Pickup () 0.050 puReverse Limit Angle () Reverse Limit Angle () 90 Reverse Pickup () Reverse Pickup () 0.050 puBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Wattmetric Ground Fault \ Wattmetric Gnd Flt 1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Voltage () Voltage () Calculated VNOV Pickup (pu) OV Pickup (pu) 0.20 puCurrent () Current () Calculated INOC Pickup (pu) OC Pickup (pu) 0.060 puOC Pickup Delay (s) OC Pickup Delay (s) 0.20 sPower Pickup (pu) Power Pickup (pu) 0.100 puRef Power (pu) Ref Power (pu) 0.500 puECA () ECA () 0 Power Pickup Delay (s) Power Pickup Delay (s) 0.20 sCurve () Curve () Definite TimeMultiplier (s) Multiplier (s) 1.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Wattmetric Ground Fault \ Wattmetric Gnd Flt 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Voltage () Voltage () Calculated VNOV Pickup (pu) OV Pickup (pu) 0.20 puCurrent () Current () Calculated INOC Pickup (pu) OC Pickup (pu) 0.060 puOC Pickup Delay (s) OC Pickup Delay (s) 0.20 sPower Pickup (pu) Power Pickup (pu) 0.100 puRef Power (pu) Ref Power (pu) 0.500 puECA () ECA () 0 Power Pickup Delay (s) Power Pickup Delay (s) 0.20 sCurve () Curve () Definite TimeMultiplier (s) Multiplier (s) 1.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Ground Current \ Ground TOC \ Ground TOC 1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Input () Input () PhasorPickup () Pickup () 1.000 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.00 Reset () Reset () InstantaneousBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Ground Current \ Ground TOC \ Ground TOC 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Input () Input () PhasorPickup () Pickup () 1.000 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.00 Reset () Reset () InstantaneousBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Ground Current \ Ground IOC \ Ground IOC 1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puDelay (s) Delay (s) 0.00 sReset Delay () Reset Delay () 0.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Ground Current \ Ground IOC \ Ground IOC 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puDelay (s) Delay (s) 0.00 sReset Delay () Reset Delay () 0.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Negative Sequence Current \ Negative Sequence TOC \ Negative Seq TOC 1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.00 Reset () Reset () InstantaneousBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Negative Sequence Current \ Negative Sequence TOC \ Negative Seq TOC 2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puCurve () Curve () IEEE Mod InvTD Multiplier () TD Multiplier () 1.00 Reset () Reset () InstantaneousBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Negative Sequence Current \ Negative Sequence IOC \ Negative Seq IOC1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puDelay (s) Delay (s) 0.00 sReset Delay () Reset Delay () 0.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Negative Sequence Current \ Negative Sequence IOC \ Negative Seq IOC2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Pickup () Pickup () 1.000 puDelay (s) Delay (s) 0.00 sReset Delay () Reset Delay () 0.00 sBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Negative Sequence Current \ Negative Sequence Directional OC \ Negative Seq DIR OC1 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Offset (Ohms) Offset (Ohms) 0.00 OhmType () Type () Neg SequencePOS SEQ Restraint () POS SEQ Restraint () 0.063 Forward ECA () Forward ECA () 75 Forward Limit Angle () Forward Limit Angle () 90 Forward Pickup () Forward Pickup () 0.050 puReverse Limit Angle () Reverse Limit Angle () 90 Reverse Pickup () Reverse Pickup () 0.050 puBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Negative Sequence Current \ Negative Sequence Directional OC \ Negative Seq DIR OC2 Description Name ValueFunction () Function () DisabledSource () Source () SRC 1Offset (Ohms) Offset (Ohms) 0.00 OhmType () Type () Neg SequencePOS SEQ Restraint () POS SEQ Restraint () 0.063 Forward ECA () Forward ECA () 75 Forward Limit Angle () Forward Limit Angle () 90 Forward Pickup () Forward Pickup () 0.050 puReverse Limit Angle () Reverse Limit Angle () 90 Reverse Pickup () Reverse Pickup () 0.050 puBlock () Block () OFFTarget () Target () Self-resetEvents () Events () Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Breaker Failure \ BF1 Description Name ValueFunction () Function () DisabledMode () Mode () 3-PoleSource () Source () SRC 1Current Supervision () Current Supervision () YesUse Seal-In () Use Seal-In () YesThree Pole Initiate () Three Pole Initiate () OffBlock () Block () OFFPhase Current Supv Pickup (pu) Phase Current Supv Pickup

(pu)1.050 pu

Neutral Current Supv Pickup (pu) Neutral Current Supv Pickup (pu)

1.050 pu

Use Timer 1 () Use Timer 1 () YesTimer 1 Pickup Delay (s) Timer 1 Pickup Delay (s) 0.000 sUse Timer 2 () Use Timer 2 () YesTimer 2 Pickup Delay (s) Timer 2 Pickup Delay (s) 0.000 sUse Timer 3 () Use Timer 3 () YesTimer 3 Pickup Delay (s) Timer 3 Pickup Delay (s) 0.000 sBreaker Pos 1 Phase A/3P () Breaker Pos 1 Phase A/3P () OFFBreaker Pos 2 Phase A/3P () Breaker Pos 2 Phase A/3P () OFFBreaker Test On () Breaker Test On () OFFPhase Current HiSet Pickup (pu) Phase Current HiSet Pickup

(pu)1.050

Neutral Current HiSet Pickup (pu) Neutral Current HiSet Pickup (pu)

1.050

Phase Current LoSet Pickup (pu) Phase Current LoSet Pickup (pu)

1.050

Neutral Current LoSet Pickup (pu) Neutral Current LoSet Pickup (pu)

1.050

LoSet Time Delay (s) LoSet Time Delay (s) 0.000 sTrip Dropout delay (s) Trip Dropout delay (s) 0.000 sTarget () Target () Self-resetEvents () Events () DisabledPhase A Initiate () Phase A Initiate () OFFPhase B Initiate () Phase B Initiate () OFFPhase C Initiate () Phase C Initiate () OFFBreaker Pos 1 Phase B () Breaker Pos 1 Phase B () OFFBreaker Pos 1 Phase C () Breaker Pos 1 Phase C () OFFBreaker Pos 2 Phase B () Breaker Pos 2 Phase B () OFFBreaker Pos 2 Phase C () Breaker Pos 2 Phase C () OFF

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Breaker Failure \ BF2 Description Name ValueFunction () Function () DisabledMode () Mode () 3-PoleSource () Source () SRC 1Current Supervision () Current Supervision () YesUse Seal-In () Use Seal-In () YesThree Pole Initiate () Three Pole Initiate () OffBlock () Block () OFFPhase Current Supv Pickup (pu) Phase Current Supv Pickup

(pu)1.050 pu

Neutral Current Supv Pickup (pu) Neutral Current Supv Pickup (pu)

1.050 pu

Use Timer 1 () Use Timer 1 () YesTimer 1 Pickup Delay (s) Timer 1 Pickup Delay (s) 0.000 sUse Timer 2 () Use Timer 2 () YesTimer 2 Pickup Delay (s) Timer 2 Pickup Delay (s) 0.000 sUse Timer 3 () Use Timer 3 () YesTimer 3 Pickup Delay (s) Timer 3 Pickup Delay (s) 0.000 sBreaker Pos 1 Phase A/3P () Breaker Pos 1 Phase A/3P () OFFBreaker Pos 2 Phase A/3P () Breaker Pos 2 Phase A/3P () OFFBreaker Test On () Breaker Test On () OFFPhase Current HiSet Pickup (pu) Phase Current HiSet Pickup

(pu)1.050

Neutral Current HiSet Pickup (pu) Neutral Current HiSet Pickup (pu)

1.050

Phase Current LoSet Pickup (pu) Phase Current LoSet Pickup (pu)

1.050

Neutral Current LoSet Pickup (pu) Neutral Current LoSet Pickup (pu)

1.050

LoSet Time Delay (s) LoSet Time Delay (s) 0.000 sTrip Dropout delay (s) Trip Dropout delay (s) 0.000 sTarget () Target () Self-resetEvents () Events () DisabledPhase A Initiate () Phase A Initiate () OFFPhase B Initiate () Phase B Initiate () OFFPhase C Initiate () Phase C Initiate () OFFBreaker Pos 1 Phase B () Breaker Pos 1 Phase B () OFFBreaker Pos 1 Phase C () Breaker Pos 1 Phase C () OFFBreaker Pos 2 Phase B () Breaker Pos 2 Phase B () OFFBreaker Pos 2 Phase C () Breaker Pos 2 Phase C () OFF

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Voltage Elements \ Phase UV \ Phase UV 1 Description Name ValueFunction Function DisabledSource Source SRC 1Mode Mode Phase to GroundPickup Pickup 1.000 puCurve Curve Definite TimeDelay Delay 1.00 sMinimum Voltage Minimum Voltage 0.100 puBlock Block OFFTarget Target Self-resetEvent Event Disabled



GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Voltage Elements \ Phase OV \ Phase OV 1 Description Name ValueFunction Function DisabledSource Source SRC 1Pickup Pickup 1.000 puDelay Delay 1.00 sReset Delay Reset Delay 1.00 sBlock Block OFFTarget Target Self-resetEvent Event Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Voltage Elements \ Neutral OV \ Neutral OV 1 Description Name ValueFunction Function DisabledSource Source SRC 1Pickup Pickup 0.300 puCurve Curve Definite TimePickup Delay Pickup Delay 1.00 sReset Delay Reset Delay 1.00 sBlock Block OFFTarget Target Self-resetEvent Event Disabled



GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Voltage Elements \ Negative Sequence OV \ Negative Sequence OV 1 Description Name ValueFunction Function DisabledSource Source SRC 1Pickup Pickup 0.300 puDelay Delay 0.50 sReset Delay Reset Delay 0.50 sBlock Block OFFTarget Target Self-resetEvent Event Disabled



GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Voltage Elements \ Auxiliary UV \ Auxiliary UV 1 Description Name ValueFunction Function DisabledSource Source SRC 1Pickup Pickup 0.700 puCurve Curve Definite TimeDelay Delay 1.00 sMinimum Voltage Minimum Voltage 0.100 puBlock Block OFFTarget Target Self-resetEvent Event Disabled

GE Multilin D60 \ Relay Parameter Section \ Grouped Elements \ Group 1 \ Voltage Elements \ Auxiliary OV \ Auxiliary OV 1 Description Name ValueFunction Function DisabledSource Source SRC 1Pickup Pickup 0.300 puPickup Delay Pickup Delay 1.00 sReset Delay Reset Delay 1.00 sBlock Block OFFTarget Target Self-resetEvent Event Disabled

GE Multilin D60 \ Relay Parameter Section \ Control Elements \ Synchrocheck \ Synchrocheck1 Description Name ValueFunction Function DisabledBlock Block OFFV1 Source V1 Source SRC 1V2 Source V2 Source SRC 2Max Volt Diff Max Volt Diff 10000 VMax Angle Diff Max Angle Diff 30 Max Freq Diff Max Freq Diff 1.00 HzFreq Hysteresis Freq Hysteresis 0.06 HzDead Source Select Dead Source Select LV1 and DV2Dead V1 Max Volt Dead V1 Max Volt 0.30 puDead V2 Max Volt Dead V2 Max Volt 0.30 puLive V1 Min Volt Live V1 Min Volt 0.70 puLive V2 Min Volt Live V2 Min Volt 0.70 puTarget Target Self-resetEvents Events Disabled

GE Multilin D60 \ Relay Parameter Section \ Control Elements \ Synchrocheck \ Synchrocheck2 Description Name ValueFunction Function DisabledBlock Block OFFV1 Source V1 Source SRC 1V2 Source V2 Source SRC 2Max Volt Diff Max Volt Diff 10000 VMax Angle Diff Max Angle Diff 30 Max Freq Diff Max Freq Diff 1.00 HzFreq Hysteresis Freq Hysteresis 0.06 HzDead Source Select Dead Source Select LV1 and DV2Dead V1 Max Volt Dead V1 Max Volt 0.30 puDead V2 Max Volt Dead V2 Max Volt 0.30 puLive V1 Min Volt Live V1 Min Volt 0.70 puLive V2 Min Volt Live V2 Min Volt 0.70 puTarget Target Self-resetEvents Events Disabled

GE Multilin D60 \ Relay Parameter Section \ Control Elements \ Monitoring Elements \ Breaker Arcing Currents \ Breaker 1 Arc Description Name ValueFunction Function DisabledSource Source SRC 1Init A Init A OFFInit B Init B OFFInit C Init C OFFDelay Delay 0.000 sLimit Limit 1000 kA2-cycBlock Block OFFTarget Target Self-resetEvent Event Disabled

GE Multilin D60 \ Relay Parameter Section \ Control Elements \ Monitoring Elements \ Breaker Arcing Currents \ Breaker 2 Arc Description Name ValueFunction Function DisabledSource Source SRC 1Init A Init A OFFInit B Init B OFFInit C Init C OFFDelay Delay 0.000 sLimit Limit 1000 kA2-cycBlock Block OFFTarget Target Self-resetEvent Event Disabled

GE Multilin D60 \ Relay Parameter Section \ Control Elements \ Monitoring Elements \ VT Fuse Failure \ VT Fuse Failure 1 Description Name ValueFunction Function Enabled

GE Multilin D60 \ Relay Parameter Section \ Control Elements \ Monitoring Elements \ VT Fuse Failure \ VT Fuse Failure 2 Description Name ValueFunction Function Disabled

GE Multilin D60 \ Additional Parameters Description Name ValueTest Tolerance Test Tolerance 4.00 %

GE Multilin D60 \ Additional Parameters \ General - General InformationDescription Name ValueManufacturer Manufacturer GEDevice Model Device Model Multilin D60Serial Number Serial Number serial no.Device Address Device Address device addressDevice type Device type Line Distance

ProtectionManufacturer HW code Hardware revision D60-N03-HLH-F8L-

H6P-M6K-PXX-UXX-WXX

Software revision Software revision D60 V5.6xSubstation Substation SubstationSubstation Address Substation Address Substation addressFeeder Feeder feederFeeder Address Feeder Address feeder addressBay Bay bayBay address Bay address bay addressProtected object name Protected object name Protected object nameDescription Description informationLocation Location Location

GE Multilin D60 \ Additional Parameters \ Distance Protection Description Name ValueRelative Impedance Tol. Z Tol. rel. 5.00 %Absolute Impedance Tol. Z Tol. abs. 20.00 mOhmRelative Timing Tol. Time Tol. rel. 3.00 %Absolute Timing Tol. Time Tol. abs. 30.00 msAngle Accuracy Angle Accuracy 2.00 Min. operating Time Min. operating Time 40.00 msCurrent supervision pick-up/drop-off ratio Current supervision

pick-up/drop-off ratio0.97

GE Multilin D60 \ Additional Parameters \ Current Tolerance Description Name ValueAbsol. current tolerance Absol. current tolerance 0.010 ARel. current tolerance Rel. current tolerance 1.50 %

GE Multilin D60 \ Additional Parameters \ Phase\Neutral\Ground TOC Description Name ValueAbs. current tolerance Abs. current tolerance 10.00 mARel. current tolerance Rel. current tolerance 1.50 %Abs. timing tolerance Abs. timing tolerance 0.50 cyRel. timing tolerance Rel. timing tolerance 5.00 %Dropout level Dropout level 0.97 Min. operate time Min. operate time 20.00 msTOC Test current (multiple of Ip) TOC Test current (multiple of

Ip)1.20

GE Multilin D60 \ Additional Parameters \ Load Encroachment Description Name ValueLoad Encroachment is Active for P-P faults Active false

GE Multilin D60 \ Additional Parameters \ Trip Output Description Name ValuePhase Distance Z1 Phase Distance Z1 truePhase Distance Z2 Phase Distance Z2 truePhase Distance Z3 Phase Distance Z3 truePhase Distance Z4 Phase Distance Z4 truePhase Distance Z5 Phase Distance Z5 trueGround Distance Z1 Ground Distance Z1 trueGround Distance Z2 Ground Distance Z2 trueGround Distance Z3 Ground Distance Z3 trueGround Distance Z4 Ground Distance Z4 trueGround Distance Z5 Ground Distance Z5 truePhase TOC1 Phase TOC1 truePhase TOC2 Phase TOC2 truePhase IOC1 Phase IOC1 truePhase IOC2 Phase IOC2 trueNeutral TOC1 Neutral TOC1 falseNeutral TOC2 Neutral TOC2 falseNeutral IOC1 Neutral IOC1 falseNeutral IOC2 Neutral IOC2 falseGround TOC1 Ground TOC1 falseGround TOC2 Ground TOC2 falseGround IOC1 Ground IOC1 falseGround IOC2 Ground IOC2 falseNegative Sequence TOC1 Negative Sequence TOC1 falseNegative Sequence TOC2 Negative Sequence TOC2 falseNegative Sequence IOC1 Negative Sequence IOC1 falseNegative Sequence IOC2 Negative Sequence IOC2 false

Test Object - Other RIO Functions

CB ConfigurationDescription Name ValueCB trip time CB trip time 50.00 msCB close time CB close time 100.00 ms52a/b % 52a/b % 20.00 %

Test Object - Distance Settings

System parameters:Line length: 1.000 Line angle: 90.00 PT connection: at line CT starpoint: Dir. lineImpedance correction 1A/I nom:

no

Impedances in primary values:

no

Tolerances:Tol. T rel.: 3.000 %Tol. T abs. +: 30.00 ms Tol. T abs. -: 30.00 msTol. Z rel.: 5.000 % Tol. Z abs.: 20.00 m

Grounding factor:kL mag.: 0.000000 kL angle: 0.000000Separate arc resistance:

no

Zone Settings:Label Type Fault loop Trip time Tol.T rel Tol.T abs+ Tol.T abs- Tol.Z rel. Tol.Z absZ1LL Tripping L-L 40.00 ms 3.000 % 30.00 ms 30.00 ms 5.000 % 205.0 mZ2LL Tripping L-L 390.0 ms 3.000 % 30.00 ms 30.00 ms 5.000 % 640.5 mZ3LL Tripping L-L 790.0 ms 3.000 % 30.00 ms 30.00 ms 5.000 % 1.025 Z4LL Tripping L-L 1.040 s 3.000 % 30.00 ms 30.00 ms 5.000 % 20.50 mZ1LN Tripping L-E 40.00 ms 3.000 % 30.00 ms 30.00 ms 5.000 % 362.8 mZ2LN Tripping L-E 390.0 ms 3.000 % 30.00 ms 30.00 ms 5.000 % 1.134 Z3LN Tripping L-E 790.0 ms 3.000 % 30.00 ms 30.00 ms 5.000 % 1.814 Z4LN Tripping L-E 1.040 s 3.000 % 30.00 ms 30.00 ms 5.000 % 36.28 m

R/-20 -15 -10 -5 0 5 10 15 20

X/

0

5

10

15

20

25

30

35

Linked XRIO ReferencesReference Name Unit Value XRIO PathRIO.DEVICE.NOMINALVALUES.INOM In 1.00 A RIO/Device/Nominal Values/In

Comment

Test ModuleName: OMICRON Advanced Distance Version: 2.40 SR 1Test Start: 11-Aug-2015 17:36:59 Test End: 11-Aug-2015 17:37:52User Name: Manager:Company:

Test Settings

Test model:Test model: constant test current ITest 2.000 AAllow reduction of ITest/VTest:

no kS = kL: no

ZS mag.: 0.000 ZS angle: 0.00 kS mag.: 1.000 kS angle: 0.00

Fault Inception:Mode: randomDC-offset: no

Times:Prefault: 500.0 ms Max. fault: 1.500 sPostfault: 500.0 ms Time reference: fault inception

Other:Extended zones: not active Switch off at zero crossing: yesLoad current enabled: no Load current:: n/a

Search Settings:Search res. rel.: 1.000 % Search res. abs.: 50.00 mIgnore nominal characteristics:

no

Search interval: 200.0 m

Auxiliary Binary Outputs:

Name Fault inception Delay time Slope Trip Delay time Slope

Ext. zones active n/a Open n/a Open

Test Results

Shot Test: Fault Type L1-E| Z | Phi % % of t nom t act. Dev. ITest Result

3.137 50.00 n/a 40.00 ms 27.60 ms -31 % 2.000 A Passed13.67 80.00 n/a 390.0 ms 376.5 ms -3.462 % 2.000 A Passed28.00 77.72 n/a 790.0 ms 777.9 ms -1.532 % 2.000 A Passed

405.5 m -90.00 n/a 1.040 s 1.037 s -0.3365 % 2.000 A Passed

R/-5 -4 -3 -2 -1 0 1 2 3 4 5

X/

0

1

2

3

4

5

6

7

8

9

Shot Test: Fault Type L2-E| Z | Phi % % of t nom t act. Dev. ITest Result

3.137 50.00 n/a 40.00 ms 28.50 ms -28.75 % 2.000 A Passed13.67 80.00 n/a 390.0 ms 375.8 ms -3.641 % 2.000 A Passed28.00 77.72 n/a 790.0 ms 777.1 ms -1.633 % 2.000 A Passed

405.5 m -90.00 n/a 1.040 s 1.044 s 0.3654 % 2.000 A Passed

R/-5 -4 -3 -2 -1 0 1 2 3 4 5

X/

0

1

2

3

4

5

6

7

8

9

Shot Test: Fault Type L3-E

| Z | Phi % % of t nom t act. Dev. ITest Result3.137 50.00 n/a 40.00 ms 33.10 ms -17.25 % 2.000 A Passed13.67 80.00 n/a 390.0 ms 374.4 ms -4 % 2.000 A Passed28.00 77.72 n/a 790.0 ms 777.5 ms -1.582 % 2.000 A Passed

405.5 m -90.00 n/a 1.040 s 1.038 s -0.1827 % 2.000 A Passed

R/-5 -4 -3 -2 -1 0 1 2 3 4 5

X/

0

1

2

3

4

5

6

7

8

9

Shot Test: Fault Type L1-L2| Z | Phi % % of t nom t act. Dev. ITest Result

1.720 70.00 n/a 40.00 ms 44.20 ms 10.5 % 2.000 A Passed9.117 90.00 n/a 390.0 ms 378.0 ms -3.077 % 2.000 A Passed15.35 90.00 n/a 790.0 ms 777.5 ms -1.582 % 2.000 A Passed

228.8 m -90.00 n/a 1.040 s 1.045 s 0.4327 % 2.000 A Passed

R/-5 -4 -3 -2 -1 0 1 2 3 4 5

X/

0

1

2

3

4

5

6

7

8

9

Shot Test: Fault Type L2-L3| Z | Phi % % of t nom t act. Dev. ITest Result

1.720 70.00 n/a 40.00 ms 32.60 ms -18.5 % 2.000 A Passed9.117 90.00 n/a 390.0 ms 378.9 ms -2.846 % 2.000 A Passed15.35 90.00 n/a 790.0 ms 780.8 ms -1.165 % 2.000 A Passed

228.8 m -90.00 n/a 1.040 s 1.046 s 0.6058 % 2.000 A Passed

R/-5 -4 -3 -2 -1 0 1 2 3 4 5

X/

0

1

2

3

4

5

6

7

8

9

Shot Test: Fault Type L3-L1

| Z | Phi % % of t nom t act. Dev. ITest Result1.720 70.00 n/a 40.00 ms 34.10 ms -14.75 % 2.000 A Passed9.117 90.00 n/a 390.0 ms 379.3 ms -2.744 % 2.000 A Passed15.35 90.00 n/a 790.0 ms 780.9 ms -1.152 % 2.000 A Passed

228.8 m -90.00 n/a 1.040 s 1.044 s 0.3654 % 2.000 A Passed

R/-5 -4 -3 -2 -1 0 1 2 3 4 5

X/

0

1

2

3

4

5

6

7

8

9

Shot Details:

Parameters:Fault Type: L3-L1| Z |: 228.8 m Phi: -90.00 R: 0.000 X: -228.8 m%: n/a % of:ITest 2.000 A

Results:t act.: 1.044 s Assessment: Passedt nom: 1.040 s Dev.: 0.3654 %t min: 360.0 ms t max: 1.071 s

Fault Quantities (natural): Fault Quantities (symmetrical):VL1: 33.20 V 59.21 V0: 0.000 V n/aVL2: 66.40 V -120.00 V1: 33.46 V -0.00 VL3: 33.20 V 60.79 V2: 32.93 V 120.00 IL1: 2.000 A 60.00 I0: 0.000 A n/aIL2: 0.000 A n/a I1: 1.155 A 90.00 IL3: 2.000 A -120.00 I2: 1.155 A 30.00 VFault: 915.2 mV -210.00 IFault: 2.000 A -120.00

PostfaultTripFaultPrefault

VL1 VL2 VL3

t/s-0.25 0.00 0.25 0.50 0.75 1.00 1.25

V/V

-100

-75

-50

-25

0

25

50

75

IL1 IL2 IL3

t/s-0.25 0.00 0.25 0.50 0.75 1.00 1.25

I/A

-3.0

-2.0

-1.0

0.0

1.0

2.0

t/s-0.25 0.00 0.25 0.50 0.75 1.00 1.25

StartTrip

Cursor DataTime Signal Value

Cursor 1 0.000 s n/aCursor 2 1.044 s n/aC2 - C1 1.044 s n/a

Test State:Test passed

Panan Main1 Rio_omicron

Documents

Transcript of Panan Main1 Rio_omicron