PB 1033

Contents Vol. 1 Part 1

ISO 1513:2010 Paints and varnishes – Examination and preparation of test examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

ISO 1514:2004 Paints and varnishes – Standard panels for testing . . . . . . 11ISO 1516:2002 Determination of flash/no flash – Closed cup

equilibrium method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35ISO 1518-1:2011 Paints and varnishes – Determination of scratch

resistance – Part 1: Constant-loading method . . . . . . . . . . . 51ISO 1518-2:2011 Paints and varnishes – Determination of scratch

resistance – Part 2: Variable-loading method . . . . . . . . . . . . . 63ISO 1519:2011 Paints and varnishes – Bend test (cylindrical mandrel) . . . 77ISO 1520:2006 Paints and varnishes – Cupping test . . . . . . . . . . . . . . . . . . . . . . 93ISO 1522:2006 Paints and varnishes – Pendulum damping test . . . . . . . . . . 107ISO 1523:2002 Determination of flash point – Closed cup

equilibrium method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123ISO 1524:2000 Paints and varnishes and printing inks

– Determination of fineness of grind . . . . . . . . . . . . . . . . . . . . . . . 141ISO 2409:2007 Paints and varnishes – Cross-cut test . . . . . . . . . . . . . . . . . . . . 153ISO 2431:2011 Paints and varnishes – Determination of flow time

by use of flow cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169ISO 2592:2000 Determination of flash and fire points – Cleveland

open cup method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191ISO 2719:2002 Determination of flash point – Pensky-Martens

closed cup method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211ISO 2808:2007 Paints and varnishes – Determination of film

thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239ISO 2810:2004 Paints and varnishes – Natural weathering of

coatings – Exposure and assessment . . . . . . . . . . . . . . . . . . . . 285ISO 2811-1:2011 Paints and varnishes – Determination of density

– Part 1: Pyknometer method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301

1034

ISO 2811-2:2011 Paints and varnishes – Determination of density – Part 2: Immersed body (plummet) method . . . . . . . . . . . . . 317

ISO 2811-3:2011 Paints and varnishes – Determination of density – Part 3: Oscillation method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

ISO 2811-4:2011 Paints and varnishes – Determination of density – Part 4: Pressure cup method . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345

ISO 2812-1:2007 Paints and varnishes – Determination of resistance to liquids – Part 1: Immersion in liquids other than water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359

ISO 2812-2:2007 Paints and varnishes – Determination of resistance to liquids – Part 2: Water immersion method . . . . . . . . . . . . . 371

ISO 2812-3:2007 Paints and varnishes – Determination of resistance to liquids – Part 3: Method using an absorbent medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381

ISO 2812-4:2007 Paints and varnishes – Determination of resistance to liquids – Part 4: Spotting methods . . . . . . . . . . . . . . . . . . . . . 393

ISO 2812-5:2007 Paints and varnishes – Determination of resistance to liquids – Part 5: Temperature-gradient oven method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405

ISO 2813:1994 Paints and varnishes – Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° . . . . . 417

ISO 2813:1994 Paints and varnishes – Determination of specular /Cor 1:1997 gloss of non-metallic paint films at 20°, 60° and 85° . . . . . 429ISO 2814:1973 Paints and varnishes – Comparison of contrast

ratio (hiding power) of paints of the same type and colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431

ISO 2815:2003 Paints and varnishes – Buchholz indentation test . . . . . . . . 435ISO 2884-1:1999 Paints and varnishes – Determination of viscosity

using rotational viscometers – Part 1: Cone-and- plate viscometer operated at a high rate of shear . . . . . . . . 451

ISO 2884-2:2003 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 2: Disc or ball viscometer operated at a specified speed . . . . . . . . . . . . . . . . 461

ISO 3231:1993 Paints and varnishes – Determination of resistance to humid atmospheres containing sulfur dioxide . . . . . . . . . 473

ISO 3233:1998 Paints and varnishes – Determination of percentage volume of non-volatile matter by measuring the density of a dried coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481

1034 1035

ISO 3233:1998 Paints and varnishes – Determination of percentage/Cor 1:1999 volume of non-volatile matter by measuring the

density of a dried coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495ISO 3248:1998 Paints and varnishes – Determination of the

effect of heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497ISO 3270:1984 Paints and varnishes and their raw materials

– Temperatures and humidities for conditioning and testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505

ISO 3668:1998 Paints and varnishes – Visual comparison of the colour of paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509

ISO 3679:2004 Determination of flash point – Rapid equilibrium closed cup method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521

ISO 3680:2004 Determination of flash/no flash – Rapid equilibrium closed cup method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547

ISO 4618:2006 Paints and varnishes – Terms and definitions . . . . . . . . . . . . . 573ISO 4623-1:2000 Paints and varnishes – Determination of resistance

to filiform corrosion – Part 1: Steel substrates . . . . . . . . . . . . 647ISO 4623-2:2003 Paints and varnishes – Determination of resistance

to filiform corrosion – Part 2: Aluminium substrates . . . . . . 661ISO 4623-2:2003 Paints and varnishes – Determination of resistance /Cor 1:2005 to filiform corrosion – Part 2: Aluminium substrates . . . . . . 675ISO 4624:2002 Paints and varnishes – Pull-off test for adhesion . . . . . . . . . 677ISO 4628-1:2003 Paints and varnishes – Evaluation of degradation of

coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 1: General introduction and designation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 695

ISO 4628-2:2003 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 2: Assessment of degree of blistering . . . . . . . . . . . . . . . 703

ISO 4628-3:2003 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 3: Assessment of degree of rusting . . . . . . . . . . . . . . . . . . 721

ISO 4628-4:2003 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 4: Assessment of degree of cracking . . . . . . . . . . . . . . . 741

1036

ISO 4628-5:2003 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 5: Assessment of degree of flaking . . . . . . . . . . . . . . . . . . 759

ISO 4628-6:2011 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 6: Assessment of degree of chalking by tape method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 769

ISO 4628-7:2003 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 7: Assessment of degree of chalking by velvet method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 779

ISO 4628-8:2005 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 8: Assessment of degree of delamination and corrosion around a scribe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 787

ISO 4628-10:2003 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 10: Assessment of degree of filiform corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 801

ISO 6270-1:1998 Paints and varnishes – Determination of resistance to humidity – Part 1: Continuous condensation . . . . . . . . . . 813

ISO 6270-2:2005 Paints and varnishes – Determination of resistance to humidity – Part 2: Procedure for exposing test specimens in condensation-water atmospheres . . . . . . . . . 823

ISO 6272-1:2011 Paints and varnishes – Rapid-deformation (impact resistance) tests – Part 1: Falling-weight test, large-area i ndenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 837

ISO 6272-2:2011 Paints and varnishes – Rapid-deformation (impact resistance) tests – Part 2: Falling-weight test, small-area indenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 849

ISO 6504-1:1983 Paints and varnishes – Determination of hiding power – Part 1: Kubelka-Munk method for white and light-coloured paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 859

1036 1037

ISO 6504-3:2006 Paints and varnishes – Determination of hiding power – Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate . . . . . . . . . . . . 893

ISO 6860:2006 Paints and varnishes – Bend test (conical mandrel) . . . . . . 907ISO 7724-1:1984 Paints and varnishes – Colorimetry – Part 1:

Principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 921ISO 7724-2:1984 Paints and varnishes – Colorimetry – Part 2:

Colour measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 931ISO 7724-3:1984 Paints and varnishes – Colorimetry – Part 3:

Calculation of colour differences . . . . . . . . . . . . . . . . . . . . . . . . . . 941ISO 7783:2011 Paints and varnishes – Determination of water-

vapour transmission properties – Cup method . . . . . . . . . . . 949ISO 7784-1:1997 Paints and varnishes – Determination of resistance

to abrasion – Part 1: Rotating abrasive-paper- covered wheel method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 975

ISO 7784-2:1997 Paints and varnishes – Determination of resistance to abrasion – Part 2: Rotating abrasive rubber wheel method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 989

ISO 7784-3:2000 Paints and varnishes – Determination of resistance to abrasion – Part 3: Reciprocating test panel method . . . 1005