PAINTS

Presented by :

MD. Faizur RahmanRJC302B43 (11305527)

Submitted to :

Vishal Kumar Poddar

INTRODUCTION

Paints is a covering or coating material.It is prepared by mixing a BASE into vehicle (carrier) along with a colouring PIGMENT

BASE

RED LEAD TITANIUM WHITE LEADZINC LEAD

PIGMENT

TYPES

COAL TAR PAINTS CELLULOSE PAINTS ALUMINIUM PAINTS ENAMELS PAINTS BITUMINOUS PAINTS

OIL PAINTS WATER PAINTS PLASTIC PAINTS CEMENTS PAINTS EMULSION PAINTS

CEMENT PAINTS

INTRODUCTION

Cement paints are covered under powder paints which are used for exterior cemented walls, all types of masonry surfaces like Bungalows, Bridges, Dams,Houses, Buildings of General Public, etc. and can also be used for Interior as well as exterior masonry cemented surfaces.

HOW IS IT MADE ?Cement Paint is a mixture of portland or white cement and lime with

additions of mineral extenders, accelerator and water repellant

substances.

White / portland cement 50-60%Titanium Dioxide 10-15%

Calcium Chloride 2 - 5%

China Clay 10%

Cement paint gives very good protection to all

kinds of masonry surfaces from Ultraviolet rays

present in sunrays

It gives very good protection from severe climatic

conditions like rain, heat, water, humidity, salt atmosphere

near sea-shores, to all types of cemented walls, surfaces.

It prevents growth of fungus and bacteria on masonry

surfaces.

USES

ENAMEL PAINT

INTRODUCTION

The paints having white lead or zinc white

ground in a small quantity of oil & mixed with

petroleum spirit & resinous matter. The term

of enamel paint that has hard, glossy &

opaque finish

APPLICATION

WOOD WORKPLASTERED SURFACEIRON & STEEL SURFACE

ADVANTAGES

Comes in container & ready to use

Tough durable & stain resistant

Can be applied both exterior & interior surfaces

Provides a glossy & smooth finish surface

DISADVANTAGE

Take a long time to dry

THANK YOU