PAINT SHOP PROJECT (1)
-
Upload
raffay-rauf -
Category
Documents
-
view
125 -
download
3
Transcript of PAINT SHOP PROJECT (1)
![Page 1: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/1.jpg)
PAINT SHOP PROJECTHow to make the Paint Shop dust free.
"Paint is not just about color. The paint also protects the
body."
Group members:Ramsha Islam - NUST - Industrial & Manufacturing
Muhammad Nabeel Khalid - NUST – Mechanical Raffay Bin Rauf - NED - Industrial & ManufacturingShahbaz Baig - NED - Industrial & Manufacturing
![Page 2: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/2.jpg)
Usage of Lacquer and Thinner(Fuel Tank)
1st coat; 207
2nd coat; 62
3rd coat; 31
Total: 424 Coats
The information obtained on 27th June, 2012
![Page 3: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/3.jpg)
Wastage of Lacquer and Thinner(Fuel Tank)
The information obtained on 27th June, 2012: Amount of thinner + lacquer= 20 – 24 liters (average 22liters).
OUR EVALUATIONS: 424 coats with 22,000ml Per coat= 51.89ml 300 coats= 15567ml 93 coats= 4825.5ml 31 coats= 1608.5 ml
WASTAGE:
4825.5 + 1608.5 = 6434ml
(6434/ 22000) x 100= 29.25%
![Page 4: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/4.jpg)
Time Consumption(Fuel Tank)
The information provided on 27th June, 2012 It takes 2 hours to complete a cycle and on its
completion 120 fuel tanks are finished.
OUR EVALUATION 1 tank in 1 minute 93 + 31 tanks were re-lacquered = 2 hours 4
minutes!
TIME WASTED:
124 fuel tanks could have been finished in that time!
![Page 5: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/5.jpg)
Usage of Paint(ABS parts)
Painted Once; 555
Repainted; 35
Total: 590
The information obtained on 27th June, 2012
![Page 6: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/6.jpg)
Wastage of Paint(ABS parts)
The information obtained on 27th June, 2012: Amount of paint+ thinner+ hardener used on 65
parts: 7 liters
OUR EVALUATIONS: Per part = 107.7ml 590 parts= 63.54 L 35 parts= 3.7 L Total= 67.24 L
WASTAGE:
(3.7/ 67.24)x 100= 5.5%
![Page 7: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/7.jpg)
Time Consumption(ABS parts)
The information provided on 27th June, 2012 It takes 90 minutes to complete 150 parts (L and R
side panel).
OUR EVALUATION: 36 seconds per part 21 minutes for 35 parts
TIME WASTED:
21 minutes!!
![Page 8: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/8.jpg)
Sources of Contamination1. Facilities
• Walls, floors and ceiling• Fans (Ceiling, exhaust and bracket)• Conveyor• Trolleys
2. People• Skin flakes and oil• Clothing debris (lint, fibers, etc)• Hair
3. Tool Generated• Brooms, mops and dusters• Friction Particles (Sand paper)
![Page 9: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/9.jpg)
Instant MeasuresPut plastic curtains
on the gates.Workers should
wipe there shoes before entering.
For that place a wet and a dry mat at the entrances.
![Page 10: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/10.jpg)
Proposed SolutionUpon arrival to
the Paint shop, dust or any impurities can ruin a paint job.
Personnel that enter the Paint Shop must wear special suits and headgear to prevent unwanted particles from entering the Paint Shop.
![Page 11: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/11.jpg)
Proposed SolutionThen while wearing the Paint Suits, they are
re-cleaned by being “blown and vacuumed” in a “Clean Room” before entering the Paint Shop.
This removes any loose dust or particles that could potentially contaminate the Paint Shop
![Page 12: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/12.jpg)
Proposed SolutionSoft Wall Clean rooms
![Page 13: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/13.jpg)
CleanroomA cleanroom is defined by ISO14644-1 as a
room in which the concentration of airborne particles is controlled and in which other relevant parameters, e.g.
1. Temperature2. Humidity3. Pressure, are controlled as necessary.
![Page 14: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/14.jpg)
Ventilation Ventilating is the process of "changing" or replacing
air in any space to control:
1. Temperature
2. Remove moisture
3. Odors
4. Smoke
5. Heat
6. Dust
7. Carbon dioxide
8. Replenish oxygen.
Ventilation includes both the exchange of air to the outside as well as circulation of air within the building.
![Page 15: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/15.jpg)
Proposed SolutionAs we have discussed that moister control or
humidity is also very important for dust control.
60 – 70% of the fuel tanks are re-lacquered in the dry months. (November, December, January and February)
To control that we can add humidifier and dehumidifiers which control the misture content in the air accordingly.
![Page 16: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/16.jpg)
Proposed SolutionHumidifier and Dehumidifier
![Page 17: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/17.jpg)
Proposed SolutionAir shower pass through doors
![Page 18: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/18.jpg)
Air ShowerClean Room Air Showers serve to protect
clean room environment from unwanted contamination.
Air showers can greatly enhance a clean room's performance by removing surface contamination from clothing and clean room garments.
Gowning/changing room areas are the interface between a dirty "street clothes" environment and a clean room environment.
Air showers blow off and remove much of this contamination preventing it from entering the clean space.
![Page 19: PAINT SHOP PROJECT (1)](https://reader031.fdocuments.us/reader031/viewer/2022033017/55cfde02bb61eb2b1e8b46a2/html5/thumbnails/19.jpg)
Proposed Layout