Page - 1 RA2 CCVT meeting - 25-27 March 2003 F-PAC validation context CMA chain has to be inline...
-
Upload
kelvin-sterman -
Category
Documents
-
view
216 -
download
1
Transcript of Page - 1 RA2 CCVT meeting - 25-27 March 2003 F-PAC validation context CMA chain has to be inline...
RA2 CCVT meeting - 25-27 March 2003 Page - 1
F-PAC validation context
• CMA chain has to be inline with the algorithms approved by ESA and used for the prototype development
• CLS Prototype validated :– using Test Data Sets based on ERS-2 and T/P data
– with real Envisat data :• header part
• all fields in the data set records
• CalVal analysis
– --> Validation OK
• CMA validated with respect to the prototype outputs– some known anomalies
– some known discrepancies agreed with ESA
– --> Validation OK, further validation handled by the CalVal team
RA2 CCVT meeting - 25-27 March 2003 Page - 2
F-Pac known “issues”• None on the POE processing
• Request for waivers on the CMA chain :– No Bent correction (agreed with ESA)
– specific DEM used for bathymetry/elevation determination (agreed with ESA)
– default strategy for ice1&sea-ice parameters
• Issues :– position in the header part but the Product Spec state:
• The Orbit State Vector (OSV) corresponds to the Ascending Node crossing if the OSV is generated from the DORIS Navigator Level 0 product (DOR_NAV_OP), or from the FOS Predicted Orbit (AUX_FPO_AX). The OSV corresponds to sensing start time of the product if the OSV is generated from the DORIS preliminary product (DOR_POR_2P), DORIS precision product (DOR_VOR_2P), or from the FOS Restituted Orbit (AUX_FRO_AX).
– duplicated products
RA2 CCVT meeting - 25-27 March 2003 Page - 3
F-Pac known “issues”
• Current anomalies on the CMA chain : – some level2 records filled with Nan values
– wrong method used for the atmospheric attenuation (used of the sigma0_S value instead of the Ku one)
• --> impacts the sigma0 and so the wind and the SSB (so the SLA)
– radiometer interpolation method different from the reference prototype • --> impacts the radiometer parameter close to land
– MCD fields / prototype values in particular for the ice1 and sea-ice values
– Doris ionospheric chain has to be tuned
– Pass number used instead of the Orbit Number in the header part
– tide management (long period term)
RA2 CCVT meeting - 25-27 March 2003 Page - 4
“Known limitation”
• On the Aux data files :– SSB table used is the ERS2 Ku band table on both Ku and S band -->
impacts the dual frequency ionospheric correction
– rain flag : • table estimated for the S band
• and cloud liquid water content biased
– GSFC00.1 MSS used (limited in latitude bandwidth)
RA2 CCVT meeting - 25-27 March 2003 Page - 5
Data validation
• IGDR daily validation by Xover and statistic analysis
• GDR cycle basis validation – ocean retracking
•
– ice retrackings
– Multi-mission data quality (Envisat/ERS-2/Jason-1)
• Long term validation– annual report for the above tasks
Document AcrobatCycle 11 validation report