Packing Contents Assembly Precautions Assembly Tools You Need ...
Transcript of Packing Contents Assembly Precautions Assembly Tools You Need ...
-
Packing Contents
* These pictures are for reference only and may vary without notice.* The packing contents may vary according to the model you purchased.* If you need to purchase the optional accessories or request part numbers, please visit the MSI website at http://www.msi.com/index.php or consult the dealer.
Optional Accessories
User GuideDrivers & Utilities Disc Antenna x 2
SATA Cable x 2
System Fan
M2 Screw x 4 M3 Screw x 8 #6-32 Sunk Screw x 1
T5 Screw x 4
Nightblade
CPU Cooler
#6-32 Flat Screw x 4
Fan Power Cable
Slim ODD Cable
ImportantThese diagrams here are for reference only and may vary from the product you purchased. The CPU, CPU cooler, system fan, memory module, graphics card, and storage device showed in the installation drawing are optional.
Assembly Precautions The components included in this package are prone to damage from electrostatic discharge
(ESD). Please adhere to the following instructions to ensure successful computer assembly. Always turn off the power supply and unplug the power cord from the power outlet before
installing or removing any computer component. Ensure that all components are securely connected. Loose connections may cause the computer
to not recognize a component or fail to start. It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the
motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.
Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
Do not use the computer in a high-temperature environment. Do not boot the computer before installation is completed. This could cause permanent damage
to the components as well as injury to the user. If you need help during any installation step, please consult a certified computer technician.
Pliers, can be used as an auxiliary tool to connect some connectors or cables.
A Phillips (crosshead) screwdriver and a flathead screwdriver, can be used to do most of the installation. Choose one with a magnetic head would be better.
Rubber gloves, can prevent yourself from being incised and suffering the static charge.
Forceps, can be used to pick up tiny screws or set up the jumpers.
Assembly Tools You Need
ImportantThese screws can be replaced by thumbscrews for easy chassis open and close.
Cleaning the Dust Container
ImportantRegularly cleaning the dust container could keep the system well-ventilated. Clean the dust container with clean water and dry it before replacing it to the system.
G52-B1062X1
Thumber Screw x 4
2.5 HDD Slide x 2
Opening the Chassis
Handle Sleeve
Network Driver & Utilities Disc
VGA Sponge
Nightblade X2 Overview
Membuka Casing
M thng my ra
Abrir la torre
Ouverture du chassis
Gehuse ffnen
Aprire lo Chassis
Kasay ama
Oteven skn
Nyissa ki a hzat
Otwieranie obudowy
Abrindo gabinete
Het chassis openen
Otvorenie skrine
Deschiderea carcasei
Otvaranje kuita
ppna Chassit
Hvordan chassiset bnes
Kotelon avaaminen
pne kabinettet
Korpuse avamine
Korpusa atvrana
Atidarymas Vaiuokl
1. USB 3.0 Port (Type C) 2. USB 2.0 Port/ Super Charger USB Port3. Microphone jack4. Line-Out jack5. OC button6. LED indicator7. System power button8. Power jack9. PS/2 Keyboard/Mouse combo port10. USB 3.0 port11. DisplayPort12. RJ-45 LAN port13. Antenna connector14. Center/ Subwoofer Out15. Rear Speaker Out16. Optical S/PDIF-Out 17. Line-In/ Side Speaker Out18. Line-Out/ Front Speaker Out19. Mic In20. USB 2.0 port21. HDMI port22. USB 3.0 port23. USB 3.1 Port (Type C)
1 2 3 4 65 7
8
10
9
12
20
13
14
15
16
11
17
18
19
21
22
23
Nightblade X2B Overview
1. USB 3.0 Port (Type C) 2. USB 2.0 Port/ Super Charger USB Port3. Microphone jack4. Line-Out jack5. LED light button6. LED indicator7. System power button8. Power jack9. PS/2 Keyboard/Mouse combo port10. USB 3.0 port11. DisplayPort12. RJ-45 LAN port13. Antenna connector14. Center/ Subwoofer Out15. Rear Speaker Out16. Optical S/PDIF-Out 17. Line-In/ Side Speaker Out18. Line-Out/ Front Speaker Out19. Mic In20. USB 2.0 port21. HDMI port22. USB 3.0 port
1 2 3 4 65 7
8
10
9
12
20
13
14
15
16
11
17
18
19
21
22
OC Genie Button (Nightblade X2)OC Genie button can help to gain the better perfomance while playing 3D games.
Push the OC Genie button to activate the overclocking mode. The button LED will light. Push the OC Genie button again to deactivate the overclocking mode.
OC Genie OFF OC Genie ON
LED Light Button (Nightblade X2B)Push the LED light button to turn on or off the LED on the bottom of the chassis.
LED OFF LED ON
BIOS, Driver and Utility UpdatesVisit the MSI website for technical guide, BIOS, driver and utility updates, and other information.
http://www.msi.com/service/download/ Keyword: Nightblade X2 / Nightblade X2B
-
A Installing the MemoryA-1
A-2
A-3
Installing the SATA HDD / ODD
M2
M2
#6-32 Flat
#6-32 FlatRemove the ODD mylar from the front cover.
C
#6-32 Flat
#6-32 Flat
Connect the SATA and power cables.
M2M2
#6-32 Flat#6-32 Flat
C-1 C-2
C-3
C-4
C-5
C-6
C-7
C-8
Installing the System FanF
T5
120mm or 92mm
T5 T5
T5
T5 T5
F-1
F-2
#6-32 Flat#6-32 Flat
F-3
This PC provides an optional system fan for better heat dissipation, especially when your graphics card power consumption is over 280W. Either 92mm or 120mm system fan is available.
A C
D
B
E
F
Installing the Graphics CardD
Adjust the supporter when installing a long graphics card.
D-1
D-2
D-3
D-4
D-5
D-7
Adjust the sponge to avoid the viberation caused by the supporter and graphics card.
D-6
Memasang Memori
Gn B nh vo
Instalar la memoria
Installer les mmoires
Speicher installieren
Installare la Memoria
Hafzay Takma
Instalace pamt
Memria teleptse
Instalowanie pamici
Instalando memria
Het geheugen installeren
Intalcia pamt
Instalarea memoriei
Instaliranje memorije
Installera Minnet
Installation af hukommelsen
Muistin asentaminen
Installere minne
Mlu paigaldamine
Atmias uzstdana
Diegimas Atmintis
SATA/
SATA/
SATA HDD / ODD
SATA HDD / ODD
Memasang HDD SATA / ODD
Gn a cng SATA v a quang vo.
SATA Harddisk Optical Drive
Instalar unidades SATA HDD/ODD
Installation du disque dur Sata et du lecteur de disque optique
Festplatte und ODD installieren
SATA HDD / ODD
Installare l' HDD / Unit Ottica SATA
SATA Sabitdisk / Optik Srcy Takma
Instalace SATA disku/mechaniky
SATA HDD / ODD teleptse
Instalowanie dyskw SATA HDD / ODD
Instalando SATA HDD / ODD
De SATA HDD/ODD installeren
Intalcia SATA disku/mechaniky
Instalarea hard disk-ului / unitatii optice
Instaliranje SATA HDD / ODD
Installera SATA HDD/ODD
Installation af SATA HDD / ODD
SATA-kiintolevyn/optisen aseman asentaminen
Installere SATA HDD / ODD
SATA HDD / ODD paigaldamine
SATA HDD/ODD uzstdana
Diegimas SATA HDD / ODD
Memasang Graphics Card
Gn card ha vo
Instalar la Tarjeta Grfica
Installation de la carte graphique
Grafikkarte installieren
Installare la Scheda Grafica
Ekran Kartn Takma
Instalace grafick karty
Grafikus krtya teleptse
Instalowanie karty graficznej
Instalando Placa de vdeo
De grafische kaart installeren
Intalcia grafickej karty
Instalarea placii grafice
Instaliranje Grafike kartice
Installera Grafikkortet
Installation af grafikkortet
Nytnohjaimen asentaminen
Installere grafikkort
Graafikakaardi paigaldamine
Grafisks kartes uzstdana
Diegimas grafikos plokt
Memasang Kipas Sistem
Gn qut tn nhit thng my vo
Instalar el ventilador
Installation du systme de ventillation
Systemkhler installieren
Installare il Sistema di Ventilazione
Sistem Fann Takma
Instalace ventiltoru
Rendszerht teleptse
Instalowanie dodatkowego chodzenia
Instalando Ventoinha
De systeemventilator installeren
Intalcia ventiltora
Instalarea ventilatorului
Instaliranje sistemskog ventilatora
Installera systemflkten
Installation af systemblseren
Kotelon tuulettimen asentaminen
Installere systemviften
Ssteemi ventilaatori paigaldamine
Sistmas ventilatora uzstdana
Diegimas sistemos ventiliatorius
Remove the cooler back pad sticker film first.
B Installing the CPU and CPU CoolerB-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
CPUCPU
CPUCPU
CPUCPU
CPU CPU
Memasang Prosesor dan pendingin Prosesor
Gn CPU v b tn nhit CPU vo
Instalar el Procesador y Disipador
Installation du processeur et refroiddisseur
CPU und CPU-Khler installieren
Installare CPU e il Dissipatore
lemci ve Soutucuyu Takma
Instalace procesoru a chladie
CPU s CPU ht teleptse
Instalowanie procesora i chodzenia
Instalando CPU e cooler do CPU
De CPU en CPU koeler installeren
Intalcia procesora a chladia
Instalarea procesorului si a coolerului de procesor
Instaliranje CPU-a i CPU kulera
Installera CPU och CPU-kylare
Installation af CPU og CPU-kler
Suorittimen ja suorittimen jhdyttimen asentaminen
Installere CPU og CPU-kjler
Installing the 2.5" HDD / SSD
Connect the SATA and power cables.
EE-1
E-2 E-3
M3
M3
M3
M3
2.5 SATA
2.5 SATA
2.5SATA HDD
2.5 SATA HDD
Memasang SATA HDD 2,5
Gn a cng SATA 2.5 vo
Hard disk 2.5 SATA
Instalar la Unidad de Disco Duro SATA de 2,5
Installation du disque dur SATA 2.5
2,5 SATA HDD installieren
2.5 SATA HDD
Installazione del disco rigido SATA 2,5 in corso
2,5 SATA sabit disk kurma
Instalovn pevnho disku 2,5 SATA HDD
2,5-es SATA HDD beszerelse
Instalacja dysku twardego SATA 2,5
Instalao da unidade de disco rgido SATA de 2,5
De 2.5 SATA HDD installeren
Intalcia 2,5 pevnho disku SATA
Instalare HDD SATA 2,5
Instaliranje 2,5 SATA HDD-a
Installera din 2,5 SATA hrddisk
Installation af 2,5 SATA HDD
2,5-tuumaisen SATA-kiintolevyn asentaminen
Installere 2,5-tommers SATA HDD