Packaging - Processing

Bid on Equipment 1-847-683-7720

www.bid-on-equipment.com FrEdlund's new • automatic can crusher reduces accumulated can bulk 7-1! This new automatic can crusher crushes up to 30 cans per minute, keeping pace with the Edlund Model 825A can operating system. It can be fed automatically from the can opening system or fed manu-ally, independent of the can opening sys-tem. It reduces accumulated can bulk 7-1, with consequent 7-1 reductions in needed storage area and scrap containers

• Complete unit may be hosed down for easy cleaning.

• Completely self-contained. • Completely guarded for safe

operation. • Hydraulic procc lc pneumatically

controlled, • Optional conveyor available to

Convey crushed cans up to tall Scrap can receiving cart.

Dimensions: Length: 48" Ttible Width: 21" Overall Width: 31" Table Height: 39"-41" Overall Height: 53" maximum 62"

Utilities: Compressed Air: 85 P,S.I., 1.5 C.F.M. Electric:5 HP, 230-460 Volts, 3 phase, 60 Hz

A complete system for washing, opening and dumping cans at rates up to 1800 per hour. Model 825A can opening system is completely automatic, requires just ono operator. Cons are washed, opened, kis removed and contents dumped at a maximum rate of 30 ca ns per minute. Vari-ous dumping assist options are available. Complete system is hose washable. Adjiistabla rails and can size conversion kit available for quick set-up change from one can size to another.

•

Edlund Edlund ev.. Inc.. BurlingtOn, VT 05401

Pfuluti tiluSA

• Long blade WO • NO metal slivers • Stainless steel blade • Easily sharpened • Fast • No can rotation • Safe • blade guarded

1

Now processes up to 1800 cans per hour! Model 825A Can Opening System washes cans, opens cans, eft:lids cans and dumps product autOmatidally at a rate of up to 30 Cons per minute with one operator) Various dumping assists may be selected to assure product removal: vibration, motored water Jets, needle punch with air blow and bottom punch to relieve vacuum. Edlund's prevun oxtr x heavy duty Cirown Pe ncn is utilized to open cans Tho entire top of the can is cut out in one stroke. No can rotation is required and no metal slivers are left.

Only one operator required The Model 825A Can Opening System is L-shaped and requires just one operator. It is air operated, except for the electric drive on the In-feed Conveyor. Dumping assembly provides ample 20-second dumping time. Complete system is hose washable. Designed for IOW processors, commissaries, cotororc, control school kitchens, the system is available with adjustable rails and can size conversion kit for quick change from one can size to another.

ovod puohor jn for longer ing lit• end maintenance. ,

Improved vetoing for Ices down BM..

Alitgotor ild rtmovor

-4,••••••".". 4:

15. • 4; • 4e. •

•••

Motored welerjet

Bottom punch to relieve vacuum

Edlund Crown Punch Now push•in

i fittings for vista malotonance

! loss down limo.•

•

••

orgor tubing.

Packaging - Processing

Bid oil Equipment 1-847-683-7720

www.bid-on-equipment.com

Edlund Company, incl. Burlington, VT 05401

Dump. contents

Larger Cylinder for improved gripping action.

New Improved "Alligator" lid remover for positive action Newly designed Rd remover auto. matically grips the lids Of Cans as they are opened. swings them away and reicaSes them into a waste receptacle, The vice-like clamp. mg action of lid remover jaws assures reliable lid removal.

fdlund AUTOMATIC CAN OPENING SYSTEM

improved cogs design 'glows removal of do-kayo cans beer; dump-ing end pro-vides hotter vibration,

Heavier construction.

Needle punch and ale blow

Vibrato*

Opens Cans

Packaging - Processing

Bid on Equipment 1-847-683-7720

www.bid-on-equipment.com Alligator lid remover

Washes cansVibrator Needle punch

and alr blow

Loading station p.

Metered water lot

Bottom punch to relieve vacuum

Dumps contents

Model 825A Can Opening System Specifications

13"

Model 825A Can Opening Machine with Alligator Lid Remover Opens up to 1800 cans per hour. Can be used alone or as part of com-plete system. Features extra heavy duty Crown punch and uses a direct acting horizontal air cylinder for can feed. Width: 37" Depth: 25"

orking height: 401/? Overall height: 67" Air: 85 PSI, 5 CFM Weight: 380 lbs.

Constructed of stainless steel wherever possible. Automatic air filter, regulator and lubricator provided. All materials NSF and USDA approved.

Utilities Compressed Air; Minimum pressure 85 PSI; volume 20 CFM, IA" line connection. (10 CFM with optional electric conveyor drive). Not Water: Minimum temperature 180°F, minimum pressure 20 PSI, 1/2" line Connection to can washing component. Drain: 1W' drain connection to can washing component.

Dimensions Model 82$A can opening machine: 38" x 25" Dumping assembly: 85" x 21" In-feed conveyor and can washer; 72" x 24" Working height: 401/4" Overall height: 67" Standard clearance under dumping cage 38"

Dumping Assist Options (May be combined for most efficient dumping) Vibration-Most products dump more cleanly with the help of a vibrating cage. Selective frequency and amplitude is part of this option. Metered Water Jets are used to flush out some products such as tomato paste or may be located to wash out can prior to disposal. Needle Punch with Air Blow is used to blow some products out of can (corn beef, dog food, etc.) Needle Punch In bottom of can releases vacuum in can to help remove product.

Other Options Double Can Actuator is used to offset misfire by dented cans. Can contact with either actuator triggers machine cycle. (Model #825A only.) Adjustable Rails in conjunction with quick conversion kits permit fast changeover from one can size to another. (Model #825 AF only.) Model #625,11610 and lino Crown Punch Can Openers available for lower production requirements. 3

iediund Company, Inc., 159 Incluse/al Parkway, Burlington, Vermont 05401 • (802)862-9661 Phineeet .11 A •