P3

P5

P5

2.0

2.2 2.5 3.0

2.6 4.5 8.7 0.9 0.8 0.7 0.5

6.7 9.8 4.5 0.5 0.5 0.5 0.5 0.6 0.7 1.0 1.5 1.6 1.2 0.9 0.6

4.3 3.4 2.7 2.4 1.9 1.5 1.2 0.9 0.7 0.6 0.6 0.6 0.6 0.8 1.1 1.7 2.9 3.6 2.1 1.5 1.0

2.5 2.8 2.1 1.9 2.1 2.5 1.7 1.2 1.0 0.8 0.8 0.9 1.0 1.6 2.6 4.8 7.7 4.0 2.5 1.5

2.3 2.1 2.2 3.2 5.4 3.3 2.1 1.4 1.1 1.0 1.0 1.3 2.2 4.3 8.3 12.5 6.8 3.3 1.7

1.8 2.1 2.8 5.1 10.7 7.3 4.0 2.2 1.3 1.0 1.0 1.2 1.7 2.7 4.3 7.3 3.7 2.0 1.2 0.8

1.5 2.1 3.6 6.5 11.5 6.8 3.2 1.8 1.1 0.9 0.9 0.9 1.2 1.6 2.3 3.6 2.2 1.3 0.9 0.6

1.1 1.4 2.1 3.0 5.2 4.0 2.0 1.3 0.9 0.7 0.7 0.7 0.8 0.9 1.2 1.6 1.1 0.8 0.6 0.4

0.7 0.9 1.2 1.7 2.3 2.2 1.3 0.9 0.6 0.6 0.5 0.5 0.5 0.6 0.7 0.9 0.8 0.6 0.4 0.3

0.6 0.7 0.9 1.1 1.1 0.8 0.6 0.5 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.4 0.3 0.2

0.4 0.7 0.6 0.5 0.4 0.4 0.3 0.3 0.3 0.3 0.3

0.5 0.4 0.3 0.3

Luminaire ScheduleSymbol Qty Label Arrangement Total Lamp Lumens LLF Description Filename

2 P5 SINGLE N.A. 0.850 LSI XLCM-5-LED-SS-CW at 23' AFG XLCM-5-LED-SS-CW.ies1 P3 SINGLE N.A. 0.850 LSI XLCM-3-LED-SS-NW at 23' AFG XLCM-3-LED-SS-NW.IES

Calculation SummaryLabel CalcType Units Avg Max Min Avg/Min Max/MinParking Illuminance Fc 1.96 12.5 0.2 9.80 62.50

© 2017 LSI INDUSTRIES INC.

Project Name Fixture Type

Catalog #

01/04/17

DOE LIGHTING FACTSDepartment of Energy has verified representative product test data and results in accordance with its Lighting Facts Program. Visit www.lightingfacts.com for specific catalog strings.

SMARTTEC™ - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceed rated temperature, providing typical operation for 100,000 hours (contact factory for TM-21 life estimate for specific configuration).

ENERGY SAVING CONTROL OPTION - DIM - 0-10 volt dimming enabled with controls by others. .

LEDS - Select high-brightness LEDs in 5000K, or 4000K color temperature, 70 CRI.

DISTRIBUTION/PERFORMANCE - Types 3, FT, FT-L, FT-R, 5, and enhanced 5E and FTE. FT-L and FT-R allow for D180 mounting configurations with factory set optics for applications such as automotive front row. Exceptional uniformity creates bright environment at lower light levels. Internal Louver (IL) option available for improved backlight control without sacrificing street side performance for FT distribution. Consult factory for internal louver for FT-L and FT-R applications.

HOUSING - One-piece, die-formed aluminum housing contains factory prewired driver. Wiring access door (with safety lanyard) located underneath.

OPTICAL UNIT - Clear tempered flat glass lens permanently sealed to weather-tight aluminum optic frame creates an IP65 rated optical unit (includes pressure-stabilizing breather).

MOUNTING - Tapered rear design allows fixtures to be mounted in 90° and 120° configurations without the need for extension arms. Use with 3” reduced drilling pattern. A round pole plate is required for mounting to round poles. Wall mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR). Proprietary pole quick mount accessories available with horizontal mounting or fixed 15° angled mounting (PQMH-KIT-CLR and PQM15-KIT-CLR) for mounting to square poles. Top mounted reinforcement bracket for high wind or vibration (up to 36) applications available as installed option or field-mount accessory.

ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277 VAC (50/60Hz input), and 347-480 VAC. Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).

DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents. Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.

OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)

FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Available in black, bronze and white. Other standard LSI finishes available. Consult factory.

WARRANTY - LSI LED fixtures carry a limited 5-year warranty.

PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data.

SHIPPING WEIGHT (in carton) - One fixture: 25.25 lbs. (11.5 kg). Packed two per carton: 43.5 lbs. (19.7 kg).

LISTING - UL listed to U.S. and international safety standards. Suitable for wet locations. For a list of the specific products in this series that are DLC listed, please consult the LED Lighting section of our website or the Design Lights website at www.designlights.org.

This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.

ARRAFunding Compliant

wet locationIP65

Fixtures comply with ANSI C136.31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 1.5G requirements.

LED AREA LIGHTS - LSI SLICE MEDIUM (XLCM)US & Int'l. patents pending

Type 3 Type FT Type 5 Type5E TypeFTE

19900 22800 22900 15500 15800 193

27500 30900 31100 21200 21100 278

19300 20000 20600 15000 15000 193

26700 27800 28500 20100 20400 278

SS

HO

SS

HO

LIGHT OUTPUT - XLCMLumens (Nominal) Watts

(Nominal)

Cool

Whi

teNe

utra

lW

hite

LED Chips are frequently updated therefore values may increase.

© 2017 LSI INDUSTRIES INC.

Project Name Fixture Type

Catalog #

01/04/17

LED AREA LIGHTS - LSI SLICE MEDIUM (XLCM)

TYPICAL ORDER EXAMPLE:

LUMINAIRE ORDERING INFORMATION

XLCM 5 LED SS 50 UE BLK PCI120

ACCESSORY ORDERING INFORMATION (Accessories are field installed)

Description Order Number Description Order Number

LUMINAIRE EPA CHART - XLCMSingle

D180°

D90°

T90°

TN120°

Q90°

0.5

1.0

0.8

1.7

1.7

1.9

FOOTNOTES:1 - House Side Shields add to fixture EPA. Consult factory.2 - Fusing must be located in the hand hole of pole.

BKS-XBO-WM-*-CLR Wall Mount Bracket 382132CLRXLCM-3/FT-HSS RM External House Side Shield (Black only - rear mounted) 603159BLK1

XLCM-FT-L/FT-R-HSS SM External House Side Shield (Black only - side mounted) 603161BLK1

X3RPP Round Pole Plate for 3" RTP Poles 408273CLRX4RPP Round Pole Plate for 4" Poles 379967CLRX5RPP Round Pole Plate for 5" Poles 379968CLR

Note: House Side Shield adds to fixture EPA. Consult Factory.

DIMENSIONS

Prefix FinishColorTemperature

XLCM LED DIM - O-10V Dimming (from external signal) Button Type Photocells PCI120 - 120V PCI208-277V - 208-277V PCI347 - 347VIL - Internal Louver (available with FT distribution only)HV - Vibration Reinforcement Bracket

Input Voltage

UE - UniversalVoltage

(120-277V)

347-480 UniversalVoltage

(347-480V)

BLK - BlackBRZ - BronzeWHT - White

OptionsLightSource

Distribution

SS - Super Saver

HO -High Output

3 - Type III

5 - Type V

FT - Forward Throw

FT-L - Forward Optic Rotated for D180 Mount (Left Side)

FT-R - Forward Optic Rotated for D180 Mount (Right Side)

5E - Type V Enhanced

FTE - Forward Throw Enhanced

DriveCurrent

19-5/16”(490mm)

11-3/16”(284mm)

7/8”(23mm)1-15/16”

(49mm)

4-7/8”(123mm)

15o

34-5/16(871mm)

LEFT AND RIGHT VERSIONS OF TYPE FT REFLECTORS (TOP VIEW)

Use TypeFT-L

(left)

Use TypeFT-R

(right)

pole

Area to be Lit

Note: Optics are not field-rotatable. For D180 Forward Throw installations specify left (FT-L) and/or right (FT-R) side mounting. Orientation is based on standing at the pole and looking out at the area to be lit.

HOUSE SIDE SHIELD (rear mount)

15-19/16”(396mm)

4-7/8”(124mm)

7-1/2”(191mm)

FK120 Single Fusing (120V) FK1202

FK277 Single Fusing (277V) FK2772

DFK208, 240 Double Fusing (208V, 240V) DFK208, 2402

DFK480 Double Fusing (480V) DFK4802

FK347 Single Fusing (347V) FK3472

PQMH-KIT-CLR Square Pole Quick Mount Horizontal Bracket 582328CLRPQM15-KIT-CLR Square Pole Quick Mount Bracket w/fixed 15˚ Angle 582329CLRBKS-XLCM-HV-CLR Reinforcement Bracket 625744CLR

CW - Cool White (5000K)NW - Neutral White (4000K)

© 2017 LSI INDUSTRIES INC.

Project Name Fixture Type

Catalog #

01/04/17

BUG LISTING

CW 27,493 270 102 B4-U0-G3HO CW-HSS 15,676 272 58 B3-U0-G2

NW 26,669 270 99 B4-U0-G3SS CW 19,936 181 110 B3-U0-G2

NW 19,298 181 107 B3-U0-G2

HO CW 21,173 268 79 B5-U0-G3NW 20,117 265 76 B4-U0-G2

SS CW 15,543 182 85 B4-U0-G2NW 14,995 182 82 B4-U0-G2

HO CW 31,142 276 113 B4-U0-G3NW 28,532 268 106 B4-U0-G2

SS CW 22,884 192 119 B4-U0-G2NW 20,575 181 114 B4-U0-G2

XLCM - Type 3

XLCM - Type 5E

XLCM - Type 5

CW 21,127 268 79 B3-U0-G4HO CW-HSS 14,636 272 54 B1-U0-G3

NW 20,387 265 77 B3-U0-G4NW-HSS 14,033 265 53 B1-U0-G3

CW 15,790 182 87 B2-U0-G3SS CW-HSS 10,798 182 59 B1-U0-G3

NW 15,073 182 83 B2-U0-G3NW-HSS 10,296 182 57 B1-U0-G2

XLCM - Type FTE

CW 30,937 276 112 B4-U0-G4CW-HSS 22,548 275 82 B3-U0-G4

HO CW-IL 28,801 284 101 B3-U0-G4NW 27,814 273 102 B3-U0-G3

NW-HSS 18,311 273 67 B2-U0-G3NW-IL 25,277 270 93 B3-U0-G3

CW 22,815 192 119 B3-U0-G3CW-HSS 16,559 192 86 B2-U0-G3

SS CW-IL 20,618 192 107 B3-U0-G3NW 19,985 181 111 B3-U0-G3

NW-HSS 13,192 181 73 B2-U0-G3NW-IL 18,498 184 100 B3-U0-G3

XLCM - Type FTDrive Current Color Temp.* Lumens Watts LER BUG Rating Drive Current Color Temp.* Lumens Watts LER BUG Rating

Drive Current Color Temp.* Lumens Watts LER BUG Rating

Drive Current Color Temp.* Lumens Watts LER BUG Rating

Drive Current Color Temp.* Lumens Watts LER BUG Rating

* Color Temperature: NW-4000K, CW-5000K

LED AREA LIGHTS - LSI SLICE MEDIUM (XLCM)

Patented

Architectural Floodlight

FloodPak

One Fixture,

Three Distributions,

Unlimited Lighting Possibilities

Philips Stonco’s new FloodPak is the ultimate in exterior lighting versatility. It is the perfect blend of performance, flexibility and architectural design. The FloodPak is three fixtures in one! It’s a high-performance cutoff luminaire for perimeter and site lighting. Rotate

it 22.5° and it’s a semi-cutoff luminaire offering forward throw. Rotate it to 45° for floodlighting or turn it over to create indirect/accent lighting—the possibilities are endless.

CutoffComplies with local Dark Sky requirements.

Site LightingPole mounted using shoebox-style arm accessory.

Facade LightingGround mounted for above-horizontal aiming.

Forward ThrowDayForm styling provides consistency in multiple applications.

Indirect LightingMaximum versatility from a single outdoor fixture.

Surface MountQuickly adjusts to different lighting requirements.

Lowest Installed Cost

1) Fewer Fixtures RequiredWhen mounted at 0 degrees, the FloodPak offers a wide Type II distribution with a spacing ratio of up to 6:1. This permits greater spacing between fixtures than conventional wallpack luminaires. Fewer fixtures equals lower cost.

2) Reduced Installation TimeThe FloodPak features quick and easy installation. By design, the FloodPak installs in half the time as compared with conventional surface and pole mounted lighting products. Faster installation translates into lower labor costs.

3) Less Energy ConsumedBecause fewer FloodPaks are required, less energy is consumed. Less energy results in lower operation costs.

Designedto MeetToday’sLighting ChallengesGreater Efficiency than Traditional Wallpacks

With conventional wallpacks, up to 70% of the available light never reaches its destination. Approximately 40% is lost within the fixture, while an additional 30% is directed outward and upward above 90°. The FloodPak’s high performance places 80% of the available light down and out where it is needed resulting in fewer fixtures, better lighting and greater savings.

Meets Dark Sky and Light Trespass Requirements

The FloodPak cutoff luminaire is designed around a high-performance, multifaceted optical system that meets today’s strict IESNA Dark Sky requirements. When mounted at 0° the FloodPak directs all of the light below 90° reducing glare and ensuring compliance to local “Dark Sky” codes. Tipping the FloodPak up 22.5° redirects the light forward allowing control over light trespass issues.

A Family of Fixtures

The FloodPak family is available in three sizes ranging from 70 thru 400 watts. The three distinct sizes ensure correct proportional relationship and architectural DayForm styling that complements most applications.

FloodPak

Conventional WallPack

FloodPak @ 0˚

When wall-mounted in the 0° position, the FloodPak replaces a standard wallpack fixture for use in perimeter and security lighting. The IESNA-rated cutoff optics provide wide distribution with up to 6:1 spacing ratio for maximum distance between fixtures, while meeting stringent Dark Sky requirements. The FloodPak can also be pole mounted for use in site and area lighting with an optional arm, or it can be rotated 180° for dramatic wall-washing effects.

Wall Wash Indirect

FPS150NLXL-1

FPM175MAL-8

FPL400MAL-8

Full Cutoff Photometry

Site Lighting

Full Cutoff

WATTAGE MULTIPLIER 50 0.25 70 0.4 100 0.59 150 1 MTG HT MULTIPLIER 8 3.5 10 2.3 15 1 20 0.6

Mounting Ht. 15’

Mounting Ht. 15’

Mounting Ht. 15’

FloodPak Features and Benefits

DayForm AppearanceStylized daytime architectural design.

Rugged ConstructionPrecision die-cast aluminum housing, door frame and mounting box.

Easy AccessHinged door includes clear non-yellowing tempered glass lens.

Multifaceted Reflector Delivers uniform illumination in all positions.

Integral Heat Sink Ensures cool operation and longer ballast life.

Injection Molded Silicon Gasket Triple-finger seal prevents leakage in any position.

Support Cable Permits easy hands-free wiring.

Integral Bubble LevelFast positioning of mounting bracket.

Duraplex-II Polyester Powder Finish Dark bronze standard. Other designer colors available.

Corrosion-Resistant HardwareAll exposed hardware made from stainless steel.

Mounting/Wiring BoxRated for 90°C supply wire.Can be surface mounted over various recess boxes or accept ½” conduit. Also accepts a button photocontrol.

cUL Listed for Wet Locations Approved for above and below horizontal aiming.

Covered under multiple patents

Vandal-ResistantCaptive and tamper-resistant screws.

FloodPak @ 22.5˚

FPS150NLXL-1

FPM175MAL-8

FPL400MAL-8

Rotating the fixture body to its 22.5° position converts the FloodPak to semi-cutoff optics with forward-throw distribution resulting in up to 5:1 spacing ratio. When pole mounted at the 22.5° angle, light is directed away from the pole base for greater coverage. It can also be ground mounted for above horizontal aiming and indirect lighting.

Pole Mounted Indirect Lighting

Semi-CutoffSemi-Cutoff Photometry

WATTAGE MULTIPLIER 70 0.36 100 0.57 150 0.7 175 1 MTG HT MULTIPLIER 8 3.5 10 2.3 15 1 20 0.6

Mounting Ht. 15’

Mounting Ht. 15’

Mounting Ht. 15’

FloodPak @ 45˚

FPS150NLXL-1

FPM175MAL-8

FPL400MAL-8

Rotated in the 45° position, the FloodPak transforms into an all-purpose flood for general lighting. It produces a NEMA 7 x 6 light distribution pattern for applications requiring a wide-beam pattern. In addition to above and below horizontal surface mounting, the FloodPak can be pole mounted as a high-angle flood or ground mounted for facade and accent lighting.

Flood Lighting Facade Lighting

FloodFloodPhotometry

WATTAGE MULTIPLIER 250 MH 0.57 250 HPS 0.79 400 HPS 1.39 400 MH 1 MTG HT MULTIPLIER 15 1.78 20 1 25 0.64 30 0.44

Mounting Ht. 15’

Mounting Ht. 15’

Mounting Ht. 15’

Contractor Friendly

Thinking Outside the BoxPhilips Stonco developed its packaging to be user friendly for fixture selection and ease of installation.

Flexible InstallationThe FloodPak can be mounted using through-wall wiring or surface-mount ½” conduit.

UL Approved Splice BoxThe isolated mounting box allows the contractor to use 90˚C supply wire.

Philips Stonco is Always on the LevelAn auto leveling device is part of every FloodPak mounting box. Just rotate the box in position on the wall until level and then anchor securely.

Hands-Free WiringAn integral cable holds the fixture to

the installed mounting box, permitting easy hands-free wiring and single-

person installation.

SpecificationsFloodPak Configurations

Ordering Logic

Dimensional DataFPS

O˚ Down 22.5˚ Down 45˚ Down 0˚ Up 22.5˚ Up 45˚ Up

FPS 150 NLX L 1

SERIES WATTAGE LAMP SOURCE LAMP VOLTAGE

FPS 42 NLX=High Pressure Sodium (NPF) L= Lamp 1=120 70 HFL=Compact Fluorescent Furnished 100 150 HID units supplied with clear medium base lamp.

FPM 175 MA L 8

SERIES WATTAGE LAMP SOURCE LAMP VOLTAGE

FPM 70 MA=Metal Halide (CWA) L= Lamp 1=120 100 LX=High Pressure Sodium (HX-HPF) Furnished 5=480 150 PMA=Pulse Start Metal Halide (HX-HPF) 8=120/ 208 175 240/277HID units supplied with clear medium base lamp.

FPL 400 MA L 8

SERIES WATTAGE LAMP SOURCE LAMP VOLTAGE

FPL 250 MA=Metal Halide (CWA) L= Lamp 1=120 400* LX=High Pressure Sodium (CWA) Furnished 5=480 8=120/208/Supplied with clear mogul base lamp. 240/277*Requires reduced outer jacketed lamp.

EPA = 0.67 sq. ft. FPM EPA = 0.89 sq. ft.

FPL EPA = 1.68 sq. ft.

FloodPak accessories

FPSSHIELDFPMSHIELDFPLSHIELDVandal Shield - Helps protect lens and lamp from breakage.Clear polycarbonate shield snaps in place over glass lens.

FPSKNUCKLE1/2” Adjustable Knuckle (FPS and FPM Series only).

FPSRPA4” Round pole adapter for use with FPSARM.

FPLRPA4” Round pole adapter for use with FPLARM.

FPLKNUCKLEAdjustable 2” Tenon Slipfitter (FPL Series only).

SFPBRO508 06/13

These mounting accessories are designed to be used with the standard FloodPak mounting hardware (above) to adapt the luminaire to other mounting applications.

2” Pipe and Concrete Pad ApplicationsPMAS Pipe Adapter for Small and MediumPMAL Pipe Adapter for Large

Retrofit ApplicationsWMAS Wall-Mounting Adapter for Small and Medium

FPLARMShoebox arm-converts FPL Series FloodPak to pole mount (minimum 4”square pole). Use FPLRPA for mounting FPLARM to a 4” round pole.

FPSARMShoebox arm converts FPS/FPM Series FloodPak to pole mount (minimum 4” square). FPS and FPM only- use FPSRPA for mounting FPSARM to a 4” round pole.

Photo ControlP110A - External 120V ControlP105A - Button 120v Control

© 2013 Koninklijke Philips N.V. (Royal Philips). All rights reserved.Specifications are subject to change without notice.www.philips.com/luminaires

Philips Lighting Company200 Franklin Square Drive Somerset, NJ 08873Phone: 855-486-2216

Philips Lighting Company281 Hillmount Road Markham ON, Canada L6C 2S3Phone: 800-668-9008