P R O D U C T C ATA L O G For Every PDS Solution Product Catalog Spring 201… · HOLOCOM – THE...

For Every PDS Solution

P R O D U C T C A T A L O G

S P R I N G 2 0 1 3

INT

RO

DU

CT

ION

HC508 is one of three Alarm Carrier options.

S E C U R E L A R G E C A R R I E R ™ ( S L C )

T H R O U G H - WA L L K I T S

U S E R D R O P B O X E S

S E C U R E M I N I D U K T ™ ( S M D )

Contact Customer Service for FREE System Design

with Bill of Materials and Labor Estimate

1-888-465-6266 or [email protected]

HOLOCOM – THE SINGLE SOURCE FOR ALL PDS SOLUTIONSHolocom, well-known for its industry standard hardened carrier protective distribution system (PDS), has expanded its offering to meet the increasing diversification of PDS requirements for DoD and other agencies needing to secure their network infrastructure against physical intrusion. Holocom is now the only manufacturer to offer all four PDS solutions approved for SIPRNet and other classified networks:

• Hardened Carrier - de facto standard Holocom PDS• Hardened Carrier plus alarm for fiber & copper networks• Alarm plus interlocking armored fiber cable• Retrofit alarm to bring non-compliant PDS into compliance With its expanded product offering, Holocom is continuing its tradition of offering customers PDS solutions that reduce life cycle costs.

Holocom designed and engineered its hardened carrier PDS to specifically improve upon the limitations of the original hardened carrier – raw steel pipe (EMT). Holocom enables moves, adds, and changes (MACs) to an existing network, lower installation labor costs, a true technical inspection of the network post installation, and drastically improves the appearance of the hardened carrier – all while comply-ing with the strict security requirements of NSTISSI 7003. Holocom offers the lowest cost and widest range of Alarm Carrier PDS options in the industry. Working with Fiber SenSys®, the leader in fiber-optic sensor technology, Holocom provides the best of alarm PDS technology including advanced tuning and calibration software that learns your environment for the elimination of nuisance alarms. Holocom tailors its services to meet project requirements and always offers free system design for govern-ment customers. This ensures and accurate bill of materials (BOM) and labor estimate to support budgeting. Holocom also provides installation/design/project management training and certification, and has installation partners worldwide.

Use the following technical guides for reference:

• National Security Agency (NSA) - NSTISSI

No. 7003, 13 December 1996

• U.S. Army Information Systems

Engineering Command (ISEC) - SIPRNET

Technical Implementation Criteria,

Version 6, October 2010

• Air Force Systems Security Instruction

AFSSI 7003, August 2008, ESIM 2009-01

AFMAN 33-201

• U.S Navy and U.S. Marine Corps IA

Publication 5239-22, October 2003

C O N N E C T O R S

E Q U I P M E N T E N C L O S U R E S

S E C U R E R A C E WAY ( S D S )

SECURE DISTRIBUTION SYSTEM (SDS) C O N T I N U E D

SDS-CT-90e 90° External Connector 13

SDS-CT-3IN Internal Three-Way Connector 13

SDS-CT-3WY Three-Way Connector 13

SDS-CT-OFF-04 Offset Connector 4 Inch 14

SDS-CT-OFF-08 Offset Connector 8 Inch 14

SDS-CT-COL-01 Column Connector 4 Inch 14

SDS-CT-COL-02 Column Connector 8 Inch 15

SDS-CT-45i 45° Internal Connector 15

SDS-CT-45e 45° External Connector 15

THROUGH-WALL KITS

SDS-TW-001-12/24 #1 Through-Wall Kit 16




ATTACHMENT KITS

SDS-RW-AKT-03 Raceway Attachment Kit 18

SDS-HW-GYP-02 Gypsum Hardware Kit 18

SDS-HW-CON-02 Concrete Hardware Kit 18

ACCESSORIES

SDS-IN-RTF RetrofitInsert-BackPlate 19

SDS-IN-RTF-02 RetrofitInsert-BackPlate(RTF2) 19

SLD-RTF-764 RetrofitSlamLockDoor 19

SDS-RW-CMB CableManagementBracket 20

SDS-LK-SGL SargentAndGreenleaf®Lock 20

SDS-RW-PNT Secure Raceway Touch-Up Paint 20

SDS-TL-HHP Secure Raceway Punch Tool 21

SDS-GN-EXY Epoxy Gun 21

SDS-332781 Secure Raceway 3M™ Epoxy 21

SDS-332784 Epoxy Nozzle 21

SDS-RW-SRJ Secure Raceway Joint 22

SDS-RW-BRG SecureRacewayJointKit 22

SDS-RW-SPR-WT Secure Raceway Spacers White 22

SDS-RW-SPR-WT6 6” Secure Raceway Spacer White 22

SDS-1003572 4.5” Trim Ring 23

ENCLOSURES

SEC-WM-UDB-H1 UserDropBox 2

SEC-WM-UDB2-H1 UserDropBox(UDB2) 2

SEC-WM-UDB3-H1 UserDropBox(UDB3) 2

SEC-WM-764-H1 764 High Security Enclosure 3

SEC-WM-885-H1 High Security Enclosure 3

SEC-WM-04U-H1 Secure Wall Mount Enclosure - 4U Depth 3

SEC-WM-PB1-H1 HighSecurityPullBox 4











SEC-WM-118-H5 HighSecurityPullBox 7

SAP-IM-SE1-H1 IPSJunctionBox 8

SEC-WM-EXT1-H1 ExteriorBuildingCommunicationsEnclosure 8

SECURE DISTRIBUTION SYSTEM (SDS)

2" x 2" SECURE RACEWAY

SDS-WM-RCW-ST Secure Raceway – Steel 9

SDS-WM-RCW-ST-05 Secure Raceway – Steel 50 Feet 9

SDS-WM-RCW-AL Secure Raceway – Aluminum 9

SDS-LK-KIT-ST SteelLockingKit 10

SDS-CT-EE6-ST End-To-End Connector 10

CONNECTORS

SDS-CT-UNI Universal Connector 11

SDS-WM-REC Run End Connector 11

SDS-CT-INF-ST Interface Sleeve 11

SDS-CT-INF-90 90° Interface Sleeve 12

SDS-CT-090 90° Connector 12

SDS-CT-90i 90° Internal Connector 12

858 .222.6430 888.465.6266

PR

OD

UC

T

LI

ST

IN

G

www.holocom.comcustomerserv [email protected]

H O L O C O M P D S P R O D U C T L I S T I N G

N O T E S :

H O L O C O M P D S P R O D U C T L I S T I N GP

RO

DU

CT

L

IS

TI

NG


858.222.6430 888.465.6266

SECURE DISTRIBUTION SYSTEM (SDS) C O N T I N U E D

SDS-1004527 4.5” Round Trim Ring 23

SDS-1004526 3.25” Trim Ring 23

SDS-2002797 2” Trim Ring 24

SDS-1002797 Interface Sleeve Reducing Washer 24

SECURE MINI DUKT™

SMD-WM-T50 Tube 26

SMD-WM-MB MountingBracket 26

SMD-MB-3WY MountingBracketThree-wayConnector 26

SMD-CT-3WY Reducing Three-way Connector 27

SMD-3WY-REC-LT Three-way Run End Connector Left 27

SMD-3WY-REC-RT Three-way Run End Connector Right 27

SMD-CT-INF Interface Sleeve 27

SMD-CT-INF-90 90° Interface Sleeve 28

SMD-CT-090 90° Connector 28

SMD-CT-90C 90° Corner Connector 28

SMD-TW-006-12/24 #6 Through-Wall Kit 29

SMD-TW-007-12/24 #7 Through-Wall Kit 29

SMD-GYP-AKT Gypsum Attachment Kit 29

SMD-CON-AKT Concrete Attachment Kit 30

SECURE LARGE CARRIER™

SLC-RCW-ST-20 Raceway & TopCap Kit 32

SLC-WM-MB MountingBracket 32

SLC-RW-SRJ Secure Raceway Joint 32

SLC-LK-KIT LockKit 33

SLC-CT-EE6 End-to-End Connector 33

SLC-WM-PBO-H1 PullBox0 33

SLC-CT-90i 90º Internal Connector 34

SLC-CT-90e 90º External Connector 34

SLC-CT-REC-LT Run End Connector Left 34

SLC-CT-REC-RT Run End Connector Right 34

SLC-TWK-REC-LT Through-Wall Run End Connector Left 35

SLC-TWK-REC-RT Through-Wall Run End Connector Right 35

SLC-TWK-TP Through-Wall Trim Plate Kit 35

SLC-SMD-DP SMD Drop Connector 35

SLC-RTF-INF-LT RetrofitInterfaceSleeveLeft 36

SLC-RTF-INF-RT RetrofitInterfaceSleeveRight 36

Rev. 05.02.13

P R O D U C T C O D ESEC-WM-UDB-H1

2 U S E R D R O P B OX ( U D B )

858.222.6430 888.465.6266

EN

CL

OS

UR

ES

P R O D U C T C O D ESEC-WM-UDB2-H1

The16-gaugeHighSecurityUserDropBox2(UDB2)providesphysicalsecurityforsingleormultiplenetworkconnections.TheUDB2mountssecurelyonwallsandrestrictsaccesstothecableterminationpoint.TheUDB2ismanufacturedwithoutatopopeningenablinginstallersthechoiceofmountingorientation.Built-inbackplate¹,cablemanager,andmanufacturedmountingpointsreduceinstallationtime.DoorlockssecurelyusingHolocom’spatentedlockingsystemandSargent&Greenleaf ®padlock(Page20).ENCLOSURE •Height7.5"xWidth6"xDepth4" •16-gaugeelectro-galvanizedsteel •Weight4.0lbs •Twolabor-saving,manufacturedmountingpoints •PowderCoatFinish:WhiteTextured DOORASSEMBLY•Singledrop-downdoorwithsecuritypadlockhasp •Tamperresistantdesignwithweldedinternalspringhinge

BACKPLATE •Integratedtensionreliefcablemanagementwrap •Removable

ACCESSORIES •Sargent&Greenleaf ®padlock(suppliedseparately)

U S E R D R O P B OX ( U D B 2 )


P R O D U C T C O D ESEC-WM-UDB3-H1TheUserDropBox3(UDB3)providesphysicalsecurityforsingleormultiplenetworkconnectionsandwasdesignedspecificallytousewithHolocomSecureMiniDukt™.TheUDB3mountssecurelyonwallsandrestrictsaccesstothecableterminationpoint.ThetopopeningperfectlypositionsSecureMiniDukt™foraone-inchstandoffusingSecureRacewaySpacers(SDS-RW-SPR-WTandinkitsSDS-RW-AKT-02/03).Built-inbackplate¹,cablemanager,andmanufacturedmountingpointsprovideinstallationefficiency.DoorlockssecurelyusingHolocom’spatentedlockingsystemandSargent&Greenleaf ®padlock(Page20). ENCLOSURE •Height7.5"xWidth6"xDepth4" •16-gaugeelectro-galvanizedsteel •Weight4.0lbs •1"NPTopeningforSecureMiniDukt™installation •Twolabor-saving,manufacturedmountingpoints •PowderCoatFinish:WhiteTextured DOORASSEMBLY •Singledrop-downdoorwithsecuritypadlockhasp •TamperresistantdesignwithweldedinternalspringhingeBACKPLATE •Integratedtensionreliefcablemanagementwrap •Removable

ACCESSORIES •Sargent&Greenleaf ®padlock(suppliedseparately)

U S E R D R O P B OX ( U D B 3 )

TheHighSecurityUserDropBox(UDB)providesphysicalsecurityforsingleormultiplenetworkconnections.TheUDBmountssecurelyonwallsandrestrictsaccesstothecableterminationpoint.Built-inbackplate1andcablemanager,manufacturedmounting points, and INF-ready top opening reduce installation time.ThedoorlockssecurelyusingHolocom’spatentedlockingsystem and a Sargent & Greenleaf ®padlock(Page20).

ENCLOSURE •Height7.5"xWidth6"xDepth4" •16-gaugeelectro-galvanizedsteel •Weight4.0lbs •23/8"diameteropening-readyforINFandracewayattachment •Twolabor-saving,manufacturedmountingpoints •PowderCoatFinish:WhiteTextured DOORASSEMBLY•Singledrop-downdoorwithsecuritypadlockhasp •Tamperresistantdesignwithweldedinternalspringhinge BACKPLATE •Integratedtensionreliefcablemanagementwrap •Removable

1 CompatiblewithmostUSsingle-gangfaceplates.Angledconnectorsrecommended.

6.0

7.5

4.0



7.5

6.0

4.0

7.5

6.0

4.0

3H I G H S E C U R I T Y E N C L O S U R EE

NC

LO

SU

RE

SP R O D U C T C O D E

SEC-WM-764-H1TheHighSecurity764Enclosurecanbemountedonwallsordesktopsandprovidesphysicalsecurityforsurfacemountboxesoranyotherconnectionpoint.The764EnclosurealsomaybeusedasasmallpullboxwithintheHolocomPDS.TheRetrofitInsert—BackPlate(SDS-IN-RTF)maybeusedinconjunctionwiththisenclosuretherebyeliminatingtheneedtoorderandinstallsurfacemountboxes.TheRetrofitInsertalsoreducesinstallationtimeandprovidesacleanerlookinsidetheenclosure.ThedoorsecurelylocksusingHolocom’spatentedlockingsystemandtheSargentandGreenleaf®padlock(Page20)1.

•Height7.5"xWidth6"xDepth4"•16-gaugeelectro-galvanizedsteel•Weight:4lbs•Singledoorwithsecuritypadlockhasp•Tamper-resistantdesignwithweldedinternalhinges•FitswithRetrofitInsert—BackPlate(SDS-IN-RTF)•PowderCoatFinish:WhiteTextured1 SeeSLD-RTF-764inAccessories(Page19)foralternatedoorchoice.

H I G H S E C U R I T Y E N C L O S U R E

SECURE WALL MOUNT ENCLOSURE - 4U DEPTH

P R O D U C T C O D ESEC-WM-885-H1

P R O D U C T C O D ESEC-WM-04U-H1


858.222.6430 888.465.6266

This16-gaugeHighSecurityEnclosurecanbemountedonwallsordesktopsandprovidesphysicalsecurityforsurfacemountboxesoranyotherconnectionpoint.TheRetrofitInsert–BackPlate2(RTF2)wasdesignedspecificallytofitinsidethe885-H1Enclosure(Page19).The885EnclosurealsomaybeusedasasmallpullboxwithintheHolocomPDS.ThedoorsecurelylocksusingHolocom’spatentedlockingsystemandtheSargentandGreenleaf®padlock(Page20).

•Height8”xWidth8”xDepth5”•16-gaugeelectro-galvanizedsteelwithweldedseams•Weight:6lbs•Singledoorwithsecuritypadlockhasp•Tamperresistantdesignwithweldedinternalhinges•FitswithRetrofitInsert-BackPlate2(Page19)•PowderCoatFinish:WhiteTextured

Thelockable“04U”enclosuremountsonawallandservesasamini-telecommunicationsroom.Itincludestwo(2)patchpanelbracketsandone(1)equipmentbracketthatcanaccommodateupto4Uofactiveelectronics.The04Ucanbeusedforterminationanddistribution/routingofhigh-securitycommunicationssystemsinaclassifiedenvironmentandisanexcellentsubstitutefortraditional19"racks.Itisdesignedtohousetelecomequipmentandpreventunauthorizedaccess.

•Height42"xWidth29"xDepth9.5"•16-gaugeelectro-galvanizedsteelwithweldedseams•Weight:94lbs•Singledoorwith3-pointlockingsystemandpadlockhaspforSargent&Greenleaf®padlock(Page19)•Tamper–resistantdesignwithweldedinternalhinges•Two(2)–4Upatchpanelbrackets•One(1)–4Uequipmentbracket•Protectedventinglouvers•PowderCoatFinish:WhiteTextured•Fankitaccessorysoldseparately(AGW-FANKITR)

42.0

29.0

9.5

8.0

8.0

5.0

6.0

7.5

4.0

P R O D U C T C O D ESEC-WM-PB1-H1

4

This16-gaugeHighSecurityPullBoxenclosuremountssecurelytowallsandwasdesignedtoprotectclassifiedcablingandallowfortheproperamountofcableloopwithintheenclosure.ThedoorsecurelylocksusingHolocom’spatentedlockingsystemandtheSargentandGreenleaf®padlock(Page20).

•Height12"xWidth18"xDepth4"•16-gaugeelectro-galvanizedsteelwithweldedseams•Weight:15lbs•Singledoorwith3-pointsecurityandpadlockhasp•Tamper-resistantdesignwithweldedinternalhinges•PowderCoatFinish:WhiteTextured

H I G H S E C U R I T Y P U L L B OX

858.222.6430 888.465.6266

EN

CL

OS

UR

ES

P R O D U C T C O D ESEC-WM-PB2-H1This16-gaugeHighSecurityPullBoxenclosuremountssecurelytowallsandwasdesignedtoprotectclassifiedcablingandallowfortheproperamountofcableloopwithintheenclosure.ThedoorsecurelylocksusingHolocom’spatentedlockingsystemandtheSargentandGreenleaf®padlock(Page20).







24.0

24.0

6.0

24.0

16.0

6.0

18.0

12.0

4.0

5H I G H S E C U R I T Y P U L L B OXE

NC

LO

SU

RE

SP R O D U C T C O D ESEC-WM-PB5-H1







858.222.6430 888.465.6266


This16-gaugeHighSecurityPullBoxenclosuremountssecurelytowallsandwasdesignedtoprotectclassifiedcabling.Duetothelargerdimensions,thePB9-H1EnclosurealsomaybeusedforpassiveequipmentwithaddedPatchPanelBracket(MBK-PP-04U-01).ThedoorsecurelylocksusingHolocom’spatentedlockingsystemandtheSargentandGreenleaf®padlock(Page20).


This12-gaugeHighSecurityEnclosurecanbemountedonwallsordesktopsandprovidesphysicalsecurityforsurfacemountboxesoranyotherconnectionpoint.ThedoorsecurelylocksusingHolocom’spatentedlockingsystemandtheSargentandGreenleaf®padlock(Page20).

•Height7.5"xWidth6"xDepth4.5"•12-gaugeelectro-galvanizedsteel•Weight:7lbs•Singledoorwithsecuritypadlockhasp•Tamper-resistantdesignwithweldedinternalhinges•PowderCoatFinish:WhiteTextured

18.0

12.0

6.0

36.0

30.0

9.0

7.5

6.0

4.5


6

This12-gaugeHighSecurityEnclosurecanbemountedonwallsordesktopsandprovidesphysicalsecurityforsurfacemountboxesoranyotherconnectionpoint.The885EnclosurealsomaybeusedasasmallpullboxwithintheHolocomPDS.ThedoorsecurelylocksusingHolocom’spatentedlockingsystemandtheSargentandGreenleaf®padlock(Page20).

•Height8"xWidth8"xDepth5"•12-gaugeelectro-galvanizedsteelwithweldedseams•Weight:10lbs•Singledoorwithsecuritypadlockhaspandpulltab•Tamperresistantdesignwithweldedinternalhinges•PowderCoatFinish:WhiteTextured


858.222.6430 888.465.6266

EN

CL

OS

UR

ES


•Height12”xWidth18”xDepth4”•12-gaugeelectro-galvanizedsteelwithweldedseams•Weight:24lbs•Singledoorwith3-pointsecurityandpadlockhasp•Tamper-resistantdesignwithweldedinternalhinges•PowderCoatFinish:WhiteTextured







24.0

16.0

6.0

18.0

12.0

4.0

8.0

8.0

5.0

7H I G H S E C U R I T Y P U L L B OXE

NC

LO

SU

RE

SP R O D U C T C O D ESEC-WM-PB3-H5






858.222.6430 888.465.6266







24.0

24.0

10.0

24.0

24.0

6.0

12.0

12.0

8.0

26.00

10.00

20.00

CONNECTOR MOUNTING PLATE

4XCABLEPASSTHROUGHSLOTS

NON-LOCKING, HINGED ACCESS DOOR

CABLEMANAGEMENTRINGS

8

858.222.6430 888.465.6266

EN

CL

OS

UR

ES


P R O D U C T C O D ESAP-IM-SE1-H1Holocomcustom-designedthesecureIPSJunctionBoxtojointhe Holocom PDS to the Hamilton Safe® COMSEC Information ProcessingSystem(IPS)container.Fourmanufacturedmounting points and a cutout align with corresponding points ontheHamiltonIPS.ThedoorlockssecurelywithaSargent&Greenleaf®padlock(Page20).

•Height10”xWidth8”xDepth8”•16-gaugeelectro-galvanizedsteel•Weight:7.5lbs•Removabledrop-downdoorwithbackflange•Four(4)manufacturedmountingpointsandcutoutmatchesto Hamilton IPS•WeldeddoorhaspforSargent&Greenleaf®padlock•PowderCoatFinish:WhiteTextured

I P S J U N C T I O N B OX

TheExteriorBuildingCommunicationsEnclosure(EXT1)providesaninterfacebetweenmobilemilitarycommunicationsplatformsandbuildingvoice/datanetworks.Thisvehicle-to-buildinginterfaceallowsreal-timecommunicationstofeedintoabuilding’soffice,conferenceroom,VTCroom,oroperationscenterfromatacticalcommunicationsplatformparkedoutsidethebuilding.Exteriordoorcloseswithcam,controlrods,and an exterior-rated handle and provides environmental protectiontothecableinterface. •Length26”xWidth20”xDepth10”•16-gaugeelectro-galvanizedsteel•Weight45lbs•Four(4)cablepass-throughslots•ConnectormountingplateshownisforTFOCA-II®FlangeMountReceptacle.Maybeorderedtomeetothercustomerspecifications(ProductCode:EXT1-MP-xxsoldseparately)•Interior,non-locking,hingedaccessdoorcoverscableconnections•Secure3-pointdoorclosure•ExteriorrateddoorhandleacceptsSargent&Greenleaf®padlock(Page20)•PowderCoatFinish:DarkGrayTextured

P R O D U C T C O D ESEC-WM-EXT1-H1

E X T E R I O R BU I L D I N G C O M M U N I C AT I O N S E N C LO S U R E

10.0

8.0

8.0

N O T E S :

9S E C U R E R A C E W AY - S T E E L 1 0 0 F E E TSEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

RA

CE

WA

Y

P R O D U C T C O D ESDS-WM-RCW-ST

Thewall-mounted2"x2"SecureRacewayenclosesandprotectssecurenetworkcables.TheSecureRacewaycomesin10-footsectionsina100"kitandcomprisestwopieces:theRaceway and TopCap. Manufactured mounting points on the Racewayallowasimplified,labor-savingmountingtechnique.Withtheadditionofotherlockingcomponents,theRacewayandTopCapsecurelylocktogether.

•16-gaugeelectro-galvanizedsteel•Components: -HighSecurityRaceway:Length120"xWidth1.9"xHeight1.8" -HighSecurityTopCap:Length120"xWidth2.0"xHeight1.8"•Totallength:120"sectionsofRacewayandTopCap(10each)•Totalweight:254lbsRacewayandTopCap•Two(2)manufacturedmountingpointsineach120"racewaysection -1½"fromendsofeach120"raceway - Located along raceway center line•PowderCoatFinish:WhiteTextured

P R O D U C T C O D ESDS-WM-RCW-AL

S E C U R E R A C E W AY - S T E E L 5 0 F E E T

P R O D U C T C O D ESDS-WM-RCW-ST-05


858.222.6430 888.465.6266

S E C U R E R A C E W AY - A L U M I N U M

Thewall-mounted2"x2"SecureRaceway,nowavailableinconvenientfive-footlengthsina50"kit,enclosesandprotectssecurenetworkcables.TheSecureRacewaycomprisestwopieces:theRacewayandTopCap.ManufacturedmountingpointsontheRacewayallowasimplified,labor-savingmountingtechnique.Withtheadditionofotherlockingcomponents,theRacewayandTopCapsecurelylocktogether.

•16-gaugeelectro-galvanizedsteel•Components: -HighSecurityRaceway:Length60"xWidth1.9"xHeight1.8" -HighSecurityTopCap:Length60"xWidth2.0"xHeight1.8"•Totallength:60"sectionsofRacewayandTopCap(10each)•Totalweight:127lbsRacewayandTopCap•Two(2)manufacturedmountingpointsineach60"racewaysection -1½"fromendsofeach60"raceway - Located along raceway center line•PowderCoatFinish:WhiteTextured

Thewall-mounted2"x2"AluminumSecureRacewayenclosesandprotectssecurenetworkcables.TheAluminumSecureRacewaycomesin10-footsectionsina100"kitandcomprisestwopieces:theRacewayandTopCap.Withtheadditionofotherlockingcomponents,theRacewayandTopCapsecurelylocktogether.

•.060"6063-T5Aluminum•Components: -HighSecurityRaceway:Length120"xWidth1.9"xHeight1.8" -HighSecurityTopCap:Length120"xWidth2.0"xHeight1.8"•Totallength:120"sectionsofRacewayandTopCap(10each)•Totalweight:100lbsRacewayandTopCap•PowderCoatFinish:WhiteTextured

1.91.5

1.5

60 INCHES

MANUFACTUREDMOUNTING POINT

RACEWAY

60 INCHES

1.8

2.0

TOPCAP

1.91.5

1.5

120 INCHES


RACEWAY

120 INCHES

1.8

2.0

TOPCAP

1.8

2.0

120 INCHES

TOPCAP

1.90

120 INCHES

RACEWAY

P R O D U C T C O D ESDS-LK-KIT-ST

10

TheSteelRacewayLockingKitisrequiredtosecurelylockdowntheSecureRaceway.Whenin“lock-down”position,theentireracewayissecureandtheenclosedcablesareprotected.Releasingthelockenablestheracewaytoberepositioned and expanded for future Moves, Adds and Changes.TheSteelLockingKitisusedwithsteelandaluminum Secure Raceway.

•16-gaugeelectro-galvanizedsteel•Components: -RacewayLockConnector:Length6"xWidth2"xHeight2" -TopCapStarter:Length6"xWidth2"xHeight2" -Lockassemblywith30"lanyard•UsedwithSteelandAluminumSecureRaceway•TotalWeight:2lbs•PowderCoatFinish:WhiteTextured

S T E E L L O C K I N G K I T

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

RA

CE

WA

Y

P R O D U C T C O D ESDS-CT-EE6-STThe End-to-End Connector securely joins two sections of SecureRacewayTopCap.Itisusedwithbothsteelandaluminum Secure Raceway.

•16-gaugeelectro-galvanizedsteel•Length6"xWidth2"xHeight1.9"•Weight:1lb•PowderCoatFinish:WhiteTextured

E N D - TO - E N D C O N N E C TO R


N O T E S :

6.0

2.0

1.9

1.9 6.0

2.0 6.0

LOCK CONNECTOR

LOCKBODYASSEMBLY

TOPCAP STARTER

11U N I V E R S A L C O N N E C TO RSEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

CO

NN

EC

TO

RS

P R O D U C T C O D ESDS-CT-UNI


858.222.6430 888.465.6266

The Universal Connector is a versatile connector that allows theSecureRacewaytonavigatearoundobstructions,columns, and off-set walls, as well as cross hallways atend runs

•Length8.0"xWidth4.5"xDepth4.5"•16-gaugeelectro-galvanizedsteel•Weight:4lbs•Double-actionspring-lockmechanismwith30"lanyard•PowderCoatFinish:WhiteTextured

8.0

4.5

4.5

R U N E N D C O N N E C TO R

P R O D U C T C O D ESDS-WM-REC

The Run End Connector, with welded end cap, provides a solution for ending a section of Secure Raceway within a room or hallway. If used in conjunction with the Reducing Three-WayConnector(SMD-CT-3WY),thesuppliedTopCapstartercanbeusedinsteadofthelonger6”TopCapstarterfromtheSteelLockingKit(SDS-LK-KIT-ST).InastandaloneSecureRacewayrun,theRunEndConnectormaybeusedinsteadoftheUniversalConnector(SDS-CT-UNI)orlockableenclosuretoendtherun.TheRunEndConnectoralsomaybeusedin conjunction with a 1, 5, or 7 Through-Wall Kit to connect SecureRacewayorSecureMiniDukt™totherun.

•16-gaugeelectro-galvanizedsteel•Length7.6"xWidth1.9"xDepth1.9"•Totalweight1.5lbs•Two(2)manufacturedmountingpointslocatedalongbasecenterline•PowderCoatFinish:WhiteTextured

7.6

1.8

RUN END CONNECTOR

1.9

3.9

TOPCAP STARTER

I N T E R FA C E S L E E V E ( I N F )

P R O D U C T C O D ESDS-CT-INF-ST

TheSecureInterfaceSleeve(INF)isdesignedtotransitiontheSecure Raceway to a Secure Enclosure or Through-Wall Kit. The INF connects all of the Holocom High Security Enclosures to Secure Raceway. Holocom improved upon its original INF byredesigningtheflangeshapefromsquaretoround.Theroundflangecompletelycoversthepenetrationholeandeliminates the need to align an additional part previously used forensuringaesthetics.BychangingthedesignofthisonecomponentintheINF,installationrequiresfewerpartstherebyimprovinginstallationefficiency.

•Height2.5"xWidth2.25"xDepthx2.25"•FlangeDiameter3.25"xThickness.125"•Electro-galvanizedsteel•2"NPTexternalthreads•Includes2"ConduitLocknutand2"ConduitBushing•Totalweight:1lb•PowderCoatFinish:WhiteTextured

2"CONDUITBUSHING 2"CONDUITLOCKNUT

2.5

2.25

.125

3.25

2.25

P R O D U C T C O D ESDS-CT-INF-90

12

The 90° Interface Sleeve provides a seamless 90° transition from enclosures or Through-Wall Kits to the Secure Raceway. HolocomimproveduponitsoriginalINF-90byredesigningtheflangeshapefromsquaretoround.Theroundflangecompletely covers the penetration hole and eliminates the need to align an additional part previously used for ensuring aesthetics.Bychangingthedesignofthisonecomponent,installationrequiresfewerpartstherebyimprovinginstallationefficiency.

•Length5.5"xWidth2.9"xDepth2.25"•Roundflange,Diameter3.25"xThickness.125"•Electro-galvanizedsteel•2"NPTexternalthreads•Includes2"ConduitLocknutand2"ConduitBushing•TotalWeight:3lbs•PowderCoatFinish:WhiteTextured

9 0 ° I N T E R FA C E S L E E V E

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

CO

NN

EC

TO

RS


5.5

2.25

2.25

2.9

3.25 DIA

2"CONDUITBUSHING

2"CONDUITLOCKNUT

P R O D U C T C O D ESDS-CT-90iThe 90° Internal Connector allows Secure Raceway to perform a right-angle turn on an inside corner. The new Connector eliminatestheinternallockingmechanismandprovidesmorefreecablespace.Withthesameheight/widthoutsidedimensions as Secure Raceway and TopCap, the updated 90° InternalConnectorallowsamountingtechniqueconsistentwith that used for Raceway/TopCap end joints and other Holocom connectors. The new Connector also weighs less and issmallertherebyallowingmountingintighterspaces.AttachtoSecureRacewaywithtwo(2)SecureRacewayJoints(inkitsSDS-RW-AKT-02/03andSDS-RW-BRGandindividuallySDS-RW-SRJ),one(1)End-to-EndConnector(SDS-CT-EE6-ST),andone(1)SteelLockingKit(SDS-LK-KIT-ST).

9 0 ° I N T E R N A L C O N N E C TO R

P R O D U C T C O D ESDS-CT-090The 90° Connector allows Secure Raceway to perform a right-angleturnwhiletravelingonaflatsurface.Thenew90°Connectoreliminatestheinternallockingmechanismandprovidesmorefreecablespace.Withthesameheight/widthoutside dimensions as Secure Raceway and TopCap, the updated90°Connectorallowsamountingtechniqueconsistentwith that used for Raceway/TopCap end joints and other Holocom connectors. The new 90° Connector also weighs less andissmallertherebyallowingmountingintighterspaces.AttachtoSecureRacewaywithtwo(2)SecureRacewayJoints(inkitsSDS-RW-AKT-03andSDS-RW-BRGandindividuallySDS-RW-SRJ),one(1)End-to-EndConnector(SDS-CT-EE6-ST),andone(1)SteelLockingKit(SDS-LK-KIT-ST).

9 0 ° C O N N E C TO R

•16-gaugeelectro-galvanizedsteel•Weight:2lbs•Three(3)manufacturedmountingpointslocatedalongconnectorcenterline•PowderCoatFinish:WhiteTextured

•16-gaugeelectro-galvanizedsteel•Weight:3lbs•Two(2)manufacturedmountingpointslocatedalongconnectorcenterline•PowderCoatFinish:WhiteTextured

7.00 X2

MANUFACTUREDMOUNTING POINTS X3

3"RADIUS

5.00 x2


3"RADIUS

139 0 ° E X T E R N A L C O N N E C TO RSEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

CO

NN

EC

TO

RS

P R O D U C T C O D ESDS-CT-90e

The 90° External Connector allows Secure Raceway to perform a right-angle turn on an outside corner. The new Connector eliminatestheinternallockingmechanismandprovidesmorefreecablespace.Withthesameheight/widthoutsidedimensions as Secure Raceway and TopCap, the updated 90° ExternalConnectorallowsamountingtechniqueconsistentwith that used for Raceway/TopCap end joints and other Holocom connectors. The new Connector also weighs less and issmallertherebyallowingmountingintighterspaces.AttachtoSecureRacewaywithtwo(2)SecureRacewayJoints(inkitsSDS-RW-AKT-02/03andSDS-RW-BRGandindividuallySDS-RW-SRJ),one(1)End-to-EndConnector(SDS-CT-EE6-ST),andone(1)SteelLockingKit(SDS-LK-KIT-ST).

•16-gaugeelectro-galvanizedsteel•Weight:3lbs•Two(2)manufacturedmountingpointslocatedalongconnectorcenterline•PowderCoatFinish:WhiteTextured


858.222.6430 888.465.6266

T H R E E - W AY C O N N E C TO R

P R O D U C T C O D ESDS-CT-3WY

The T-shaped Three-Way Connector provides a right-angle turn alongawallandisoftenusedtoprovideaconnectionbetweenthe main Secure Raceway and the drop to an end-user enclosure.Thistwo-piececonnectorconsistsofabaseandcoverwhichcomeapartthroughthedouble-actionspring-lockmechanism.Threemanufacturedmountingpointsonthebaseallowasimplified,labor-savingmountingtechnique.

•16-gaugeelectro-galvanizedsteel•Weight:4lbs•Double-actionspring-lockmechanism•Three(3)manufacturedmountingpointslocatedalongconnector center line•PowderCoatFinish:WhiteTextured

MANUFACTURED MOUNTINGPOINTS X3

I N T E R N A L T H R E E - W AY C O N N E C TO R

P R O D U C T C O D ESDS-CT-3IN

The Internal Three-Way Connector splits the Secure Raceway run, allowing the original run to continue while another run spans across a hallway to the opposite wall. Holocom recently improveduponitsoriginalInternalThree-WayConnectorbyconsolidating two pieces into one. The design to a single-piece connectormakesinstallationeasierandfaster.

•Length15.2"xWidth7.9"xDepth2.2"•16-gaugeelectro-galvanizedsteel•Weight:2.5lbs•Attachestoracewaywithsecureclips•PowderCoatFinish:WhiteTextured

6.90 X2

3"RADIUS


P R O D U C T C O D ESDS-CT-OFF-04

14

TheOffsetConnector4InchgreatlysimplifiesandexpeditesinstallationofSecureRacewayaroundacolumnwitha4"depth.OffsetConnectorsreducethenumberofpartspreviouslyrequiredtomounttheracewayaroundacolumn,providingacleanerappearanceandreducingmaterialandlaborcosts.TheOffsetConnector4Inchisconvenientlypackagedinsetsoftwoconnectors(ProductCode:SDS-CT-COL-01).RefertoSDS-CT-COL-01 for installation guidelines.

•16-gaugeelectro-galvanizedsteel•Components: -Raceway:Length11"xWidth6"xHeight1.8" -TopCap:Length11"xWidth6"xHeight1.9"•TotalWeight:2.30lbs•Two(2)manufacturedmountingpointsineachRacewaysection -1.5"fromeachend - Located along center line•PowderCoatFinish:WhiteTextured

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

CO

NN

EC

TO

RS


O F F S E T C O N N E C TO R 4 I N C H

1.5

1.5

1.9

1.8

TOPCAP

RACEWAY


11.0

6.04.0

1.0

P R O D U C T C O D ESDS-CT-COL-01TheColumnConnector4Inchofferstheconvenienceoftwo(2)OffsetConnectors4Inch(SDS-CT-OFF-04)packagedtogetherina single product. The Offset Connectors 4 Inch greatly simplify and expedite installation of Secure Raceway around a column witha4"depth.Formostapplications,installationwouldrequireone(1)ColumnConnector4Inchjoinedbyfour(4)SecureRacewayJoints(SDS-RW-SRJ),three(3)sectionsofRacewayandTopCap,one(1)SteelLockingKit(SDS-LK-KIT-ST),andthree(3)End-to-EndConnectors(SDS-CT-EE6-ST).

•16-gaugeelectro-galvanizedsteel•Components: -Two(2)piecesRaceway:Length11"xWidth6"xHeight1.8" -Two(2)piecesTopCap:Length11"xWidth6"xHeight1.9"•TotalWeight:4.60lbs•Two(2)manufacturedmountingpointsineachOffsetConnector -1.5"fromeachend - Located along raceway center line•PowderCoatFinish:WhiteTextured

C O L U M N C O N N E C TO R 4 I N C H

1.5

1.5

1.9

1.8

TOPCAP

RACEWAY


11.0

6.04.0

1.0

PRODUCT CONTAINS 2X SDS-CT-OFF-04

P R O D U C T C O D ESDS-CT-OFF-08TheOffsetConnector8Inchgreatlysimplifiesandexpeditesinstallation of Secure Raceway around a column with an 8”depth.OffsetConnectorsreducethenumberofpartspreviouslyrequiredtomounttheracewayaroundacolumn,providing a cleaner appearance and reducing material and laborcosts.TheOffsetConnector8Inchisconvenientlypackagedinsetsoftwoconnectors(ProductCode:SDS-CT-COL-02).RefertoSDS-CT-COL-02forinstallationguidelines. •16-gaugeelectro-galvanizedsteel•Components: -Raceway:Length15”xWidth10”xHeight1.8” -TopCap:Length15”xWidth10”xHeight1.9”•TotalWeight:3.42lbs•Two(2)manufacturedmountingpointsineachColumnConnector - 1.5” from each end - Located along raceway center line•PowderCoatFinish:WhiteTextured

O F F S E T C O N N E C TO R 8 I N C H

15.0

10.08.0

1.0

1.5

1.5

1.8

1.9


TOPCAP

RACEWAY

15 C O L U M N C O N N E C TO R 8 I N C HSEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

CO

NN

EC

TO

RS

P R O D U C T C O D ESDS-CT-COL-02

TheColumnConnector8Inchofferstheconvenienceoftwo(2)OffsetConnectors8Inch(SDS-CT-OFF-08)packagedtogetherin a single product. The Offset Connectors 8 Inch greatly simplify and expedite installation of Secure Raceway around acolumnwithan8"depth.Formostapplications,installationwouldrequireone(1)ColumnConnector8Inchjoinedbyfour(4)SecureRacewayJoints(SDS-RW-SRJ),three(3)sectionsofRacewayandTopCap,one(1)SteelLockingKit(SDS-LK-KIT-ST),andthree(3)End-to-EndConnectors(SDS-CT-EE6-ST). •16-gaugeelectro-galvanizedsteel•Components: -Two(2)piecesRaceway:Length15"xWidth10"xHeight1.8" -Two(2)piecesTopCap:Length15"xWidth10"xHeight1.9"•TotalWeight:6.84lbs•Two(2)manufacturedmountingpointsineachOffsetConnector -1.5"fromeachend - Located along raceway center line•PowderCoatFinish:WhiteTextured


858.222.6430 888.465.6266

4 5 ° E X T E R N A L C O N N E C TO R

P R O D U C T C O D ESDS-CT-45e

The 45° External Connector mates with the 45° Internal Connector (SDS-CT-45i)toinstallSecureRacewayaroundobstacleswithawalldepthtooshallowforthe90°Connectors(SDS-CT-90i/SDS-CT-90e).The45°Connectorsreducethenumberofpartspreviouslyrequired,provideacleanerappearance,andreducematerialandlaborcosts.Formostapplications,installationwouldrequireone45°ExternalConnectorandone45°InternalConnectorjoinedbyfour(4)SecureRacewayJoints(SDS-RW-SRJ),three(3)sectionsofRacewayandTopCap,one(1)SteelLockingKit(SDS-LK-KIT-ST),andthree(3)End-to-EndConnectors(SDS-CT-EE6-ST).•16-gaugeelectro-galvanizedsteel•Components: -Raceway:Length7.4"xWidth4.3"xHeight1.8" -TopCap:Length7.4"xWidth4.3"xHeight1.9"•TotalWeight:1.35lbs•Two(2)manufacturedmountingpointsineachRacewaysection -1.5"fromeachend - Located along center line•Soldindividuallybutusedinconjunctionwiththe45°InternalConnector(SDS-CT-45i)•PowderCoatFinish:WhiteTextured

1.5

1.5

1.9

1.8

TOPCAP

RACEWAY


7.4

4.3

45°1.0

4 5 ° I N T E R N A L C O N N E C TO R

P R O D U C T C O D ESDS-CT-45i

The 45° Internal Connector mates with the 45° External Connector (SDS-CT-45e)toinstallSecureRacewayaroundobstacleswithawalldepthtooshallowforthe90°Connectors(SDS-CT-90i/SDS-CT-90e).The45°Connectorsreducethenumberofpartspreviouslyrequired,provideacleanerappearance,andreducematerialandlaborcosts.Formostapplications,installationwouldrequireone45°ExternalConnectorandone45°InternalConnectorjoinedbyfour(4)SecureRacewayJoints(SDS-RW-SRJ),three(3)sectionsofRacewayandTopCap,one(1)SteelLockingKit(SDS-LK-KIT-ST),andthree(3)End-to-EndConnectors(SDS-CT-EE6-ST).

•16-gaugeelectro-galvanizedsteel•Components: -Raceway:Length5.8"xWidth3.8"xHeight1.8" -TopCap:Length5.8"xWidth3.8"xHeight1.9"•TotalWeight:.99lbs•Two(2)manufacturedmountingpointsineachRacewaysection -1.5"fromeachend - Located along center line•Soldindividuallybutusedinconjunctionwiththe45°ExternalConnector(SDS-CT-45e)•PowderCoatFinish:WhiteTextured

1.5

1.5

1.8

1.9 MANUFACTUREDMOUNTING POINT

TOPCAP

5.8

3.845°

1.0

RACEWAY

15.0

10.08.0

1.0

1.5

1.5

1.8

1.9


PRODUCT CONTAINS 2X SDS-CT-OFF-08

TOPCAP

RACEWAY

P R O D U C T C O D ESDS-TW-001-12SDS-TW-001-24

16

The updated #1 Through-Wall Kit provides a one-inch through-wallpathwayinmultipleinstallationscenarios,including:

•SDS2”x2”RacewaytoSDS2”x2”Raceway•SDS2”x2”RacewaytoUserDropBoxorotherenclosure•UserDropBoxtoUserDropBoxorotherenclosure

The newer components provide maximum inside diameter, smoothercablemovement,andapowder-coatedtrimringandcouplerforamorefinishedappearance.

12"•Galvanizedsteelthreadedpipe•Totalweight:2lbs THROUGH-WALLKITINCLUDES:

•One(1)–1"x12"NPTthreaded pipe•Two(2)–1"conduitbushings•Two(2)–1"conduitlocknuts•Two(2)–1”NPTpowder-coated couplers•Two(2)–1”Chasenipples•Two(2)powder-coatedtrimrings

# 1 T H R O U G H - W A L L K I T

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

TH

RO

UG

H-

WA

LL

K

IT

S


The updated #2 Through-Wall Kit provides a two-inch through-wallpathwayfrom:

•SecureLargeCarrier(SLC)RacewaytoSDS2”x2”Raceway•SDS2”x2”RacewaytoaHolocomHighSecurityEnclosure

The newer components provide maximum inside diameter, smoothercablemovement,andpowder-coatedtrimringandcouplerforamorefinishedappearance.


•One(1)–2"x12"NPT threaded pipe•One(1)–2"conduitbushing•One(1)–2"conduitlocknut•One(1)–2”NPTcoupler•OneInterfaceSleeve•One(1)2”NPTpowder-coated coupler•One(1)trimring•One(1)2”Chasenipple



24"•Galvanizedsteelthreadedpipe•Totalweight:3lbs

THROUGH-WALLKITINCLUDES:

•One(1)–1"x24"NPTthreaded pipe•Two(2)–1"conduitbushings•Two(2)–1"conduitlocknuts•Two(2)–1”NPTpowder-coated couplers•Two(2)–1”Chasenipples•Two(2)powder-coatedtrimrings


•One(1)–2"x24"NPT threaded pipe•One(1)–2”conduitbushing•One(1)–2”conduitlocknut•One(1)–2”NPTcoupler•OneInterfaceSleeve•One(1)2”NPTpowder-coated coupler•One(1)trimring•One(1)2”Chasenipple See:www.holocom.com/throughwall.htmlforinstallationinstructions.

See:www.holocom.com/throughwall.htmlforinstallationinstructions.

N O T E S :

INTERFACESLEEVE

2"NPTCOUPLER

2"NPTX12"/24"THREADEDPIPE

2"NPTPOWDERCOATEDCOUPLER

2"CHASENIPPLE

2"CONDUITBUSHING

2"CONDUITLOCKNUT

TRIM RING

1"CHASENIPPLEX2

1"NPTPOWDERCOATEDCOUPLERX2


1"CONDUITBUSHINGX2 1"CONDUITNUTX2

TRIM RING X2

17


SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

TH

RO

UG

H-

WA

LL

K

IT

S


The updated #5 Through-Wall Kit provides a 1” through-wall pathwayinmultipleinstallationscenariosincluding:

•SDS2"x2"RacewaytoSDS2"x2"Raceway•SDS2"x2"RacewaytoSecureMiniDukt™(SMD)Tubing•SDS2"x2"RacewaytoUserDropBoxorotherenclosure

The newer components provide maximum inside diameter, smoothercablemovement,andpowder-coatedtrimringandcouplerforamorefinishedappearance.

12"•Galvanizedsteelthreadedpipe•Totalweight:2.1lbs THROUGH-WALLKITINCLUDES:

•One(1)–1"x12"NPT threaded pipe•Two(2)–1"conduitbushings•Two(2)–1"conduitlocknuts•One(1)reducingwasher•One(1)InterfaceSleeve•One(1)1"NPTpowder-coated coupler•One(1)Chasenipple•One(1)powder-coatedtrimring


858.222.6430 888.465.6266



ThisThrough-WallKitprovidesa2"through-wallpathwayfrom one Secure Raceway section to another Secure Raceway section.


•One(1)–2"x12"NPT threaded pipe•Two(2)–2"NPTcouplers•Two(2)InterfaceSleeves


•One(1)–2"x24"NPT threaded pipe•Two(2)–2"NPTcouplers•Two(2)InterfaceSleeves


•One(1)–2"x24"NPT threaded pipe•Two(2)–1"conduitbushings•Two(2)–1"conduitlocknuts•One(1)reducingwasher•One(1)InterfaceSleeve•One(1)1"NPTpowder-coated coupler•One(1)Chasenipple•One(1)powder-coatedtrimring



N O T E S :

2"NPT12"/24"THREADEDPIPE

INTERFACESLEEVEX2

2"NPTCOUPLERX2

1"NPT12"/24"THREADEDPIPE

INTERFACESLEEVE1"CONDUITNUTX2

1"CONDUITBUSHINGX2

REDUCING WASHER


1"CHASENIPPLE

TRIM RING

P R O D U C T C O D ESDS-RW-AKT-03

18

TheRacewayAttachmentKitcontainstwocomponents:SecureRacewayJoint(SRJ)andSecureRacewaySpacer.TheSRJ,whichreplacestheBridgeintheformerRacewayAttachment Kit, covers and adds rigidity to all Secure Raceway end joints. Secure Raceway Spacers are used as a standoff to provide 360-degree inspection of Holocom Secure Raceway. WhencombinedwiththeproperHardwareKit,theRacewayAttachment Kit provides the material necessary to securely attach 100 feet of Holocom Secure Raceway to the wall.

EACHRACEWAYATTACHMENTKITCONTAINS:•Fifty(50)SecureRacewayJoints(SRJ)•OneHundred(100)Nylon6/6WhiteRacewaySpacers

TotalWeight:13lb

R A C E W AY AT TA C H M E N T K I T

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

AT

TA

CH

ME

NT

K

IT

S

P R O D U C T C O D ESDS-HW-GYP-02TheGypsumHardwareKit,whencombinedwiththeRacewayAttachmentKit(SDS-RW-AKT-02),includesthenecessarymaterials to securely attach Holocom PDS components to gypsum dry walls, hollow walls, panel walls, or steel studs. One Gypsum Hardware Kit supports the installation of 100 feet of Holocom Secure Raceway.

EACHKITINCLUDES:•Seventy(70)¼-20ToggleBolts•Seventy(70)¼-20x3"PanPhillipsscrews•Ten(10)¼-14x3"TEKHexWasherHeadscrews

Totalweight:4.7lbs

G Y P S U M H A R D W A R E K I T

C O N C R E T E H A R D W A R E K I T


P R O D U C T C O D ESDS-HW-CON-02TheConcreteHardwareKit,whencombinedwiththeRacewayAttachmentKit(SDS-RW-AKT-02),includesthenecessarymaterials to properly attach Holocom PDS components to concreteorsolidblockwalls.OneConcreteHardwareKitsupports the installation of 100 feet of Holocom Secure Raceway.

EACHKITINCLUDES:•Fifteen(15)¼"x2¼"HexWasherHeadconcretescrews•Seventy(70)¼"x3¼"HexWasherHeadconcretescrews•Twenty(20)¼"x5"HexWasherHeadconcretescrews•Two(2)3/16"x6.5"Masonrydrillbits•Two(2)5/16"x6"Masonrydrillbits•Seventy(70)Alligator®flangeanchors

TotalWeight:2.9lbs

3.75

1.8

1.OO DIA

0.313 DIA

1.0

0.75.313 DIA

19R E T R O F I T I N S E R T - B A C K P L AT ESEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

AC

CE

SS

OR

IE

S

P R O D U C T C O D ESDS-IN-RTF

TheRetrofitInsert–BackPlate(RTF)isconstructedofpowdercoated16-gauge,electro-galvanizedsteelandfitsintoHighSecurity Enclosure SEC-WM-764-H1. The RTF improves installationefficiencybyeliminatingtheneedtoorderandinstallsurfacemountboxesandprovidesacleanerlookinsidethe enclosure. The RTF includes an integrated tension relief cablemanagementwrap,a6-32U-styleclipforastandardsingle-gang faceplate1 attachment, and six nylon tree push-in rivets for attaching the RTF to the 764 Enclosure.

•Height5.6"xWidth4.00"xDepth2.6"•16-gaugeelectro-galvanizedsteel•Weight.65lbs•DesignedtofitHighSecurityEnclosureSEC-WM-764-H1•Integratedtensionreliefcablemanagementwrap•6-32U-styleclipforastandardsingle-gangfaceplate1 attachment•Six(6)nylontreepush-inrivetsforenclosureattachment•PowderCoatFinish:WhiteTextured

1 CompatiblewithmostUSsingle-gangfaceplates.Angledconnectorsrecommended

P R O D U C T C O D ESLD-RTF-764

R E T R O F I T I N S E R T - B A C K P L AT E ( R T F 2 )

P R O D U C T C O D ESDS-IN-RTF-02


858.222.6430 888.465.6266

R E T R O F I T S L A M L O C K D O O R

TheRetrofitInsert–BackPlate2(RTF2)isdesignedspecificallytofitinsidethe885HighSecurityEnclosure(SEC-WM-885-H1).TheRTF2isconstructedofpowder-coated16-gauge, electro-galvanized steel and eliminates the need to orderandinstallsurfacemountboxes.Thecut-outandholepattern are designed to support 2x Corning Closet Connector HousingPanels(CCH-CP).Sixnylontreepush-inrivetsattachthe RTF2 to the 885 Enclosure.

•Height6.2"xWidth6"xDepth1.9"•16-gaugeelectro-galvanizedsteel•Weight1.25lbs•FitsintoHighSecurityEnclosureSEC-WM-885-H1•Supportstwo(2)CorningClosetConnectorHousingPanels(CCH-CP)•Six(6)nylontreepush-inrivetsforenclosureattachment•PowderCoatFinish:WhiteTextured

TheRetrofitSlamLockDoorforSEC-WM-764-H1offerscustomers an alternative door to the one supplied with the764Enclosure(SEC-WM-764-H1).TheSlamLockDoorcloses securely and eliminates the need to use a Sargent & Greenleaf®HighSecurityPadlock.TwopulllanyardsreleaseeachslamlockandareaccessiblebyunlockingtheHolocomSecure Raceway.

•16-gaugeelectro-galvanizedsteeldoor•Weight1.5lbs•Replacesdoorsuppliedwith764Enclosure(SEC-WM-764-H1)•Twoslamlocksconnecttotwopulllanyardsforunlockingdoor•EliminatestheneedforaSargent&Greenleaf®padlock.•PowderCoatFinish:WhiteTextured

4.4

2.6

TENSION RELIEFCABLEWRAP

5.6

4.0

INCLUDES 6-32 J-STYLE CLIP FORSTANDARD FACEPLATE ATTACHMENT

INCLUDES6XNYLONTREEPUSH-INRIVETSFOR ENCLOSURE ATTACHMENT

6.2

6.0

CUT-OUT AND HOLE PATTERNS SUPPORT 2XCORNING ® CLOSET CONNECTOR HOUSINGPANELS(CCH-CP)

6.4

1.9

INCLUDES 6X NYLON TREE PUSH-INRIVETSFORENCLOSUREATTACHMENT

DUAL SLAM LOCKS

PULL LANYARDS FOR UNLOCKING

P R O D U C T C O D ESDS-RW-CMB

20

Duringinstallation,theCableManagementBracket(CMB)holdsthenetworkcablinginplaceintheraceway.ThiseliminatestheneedtouseVelcro®orziptieswhichmustberemovedpriortoclosingtheraceway.TheCableManagementBracketsmaybeleftintheracewayoncetheinstallationiscomplete.Suppliedinquantitiesof30perpackage.

•Length1.5"xWidth1.8"xHeight.4"•22-gaugeelectro-galvanizedsteel•Notpowdercoated•Weight.9lbsperpackage•Quantity:30perpackage

C A B L E M A N A G E M E N T B R A C K E T

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

AC

CE

SS

OR

IE

S

P R O D U C T C O D ESDS-LK-SGLTheSargent&Greenleaf®8077ADPadlockisaspecializedcombinationpadlockdesignedtoshowobviousevidenceofforcedentryattempt.Uniqueserialnumbersonthreedifferentlockpartsensurethatcriticalpartsarenotbrokentogainentryandthenreplaced.ThisSargent&GreenleafpadlockisdesignedtomeetstringentU.S.governmentspecificationsandis used in conjunction with all Holocom Secure Enclosures.

•Weight:2lbs•Hardenedsteelshackle•MeetsstringentU.S.Governmentspecifications•30-minuteprotectionagainstexpertmanipulation•10-minuteprotectionagainstsurreptitiousentryattack•125,000possiblelockcombinations•Resetlockcombinationwiththeincludedchangekey

S A R G E N T A N D G R E E N L E A F ® L O C K

S E C U R E R A C E W AY TO U C H - U P PA I N T


P R O D U C T C O D ESDS-RW-PNTThe Secure Raceway Touch-Up Paint is a perfect match to the powder coat of the Holocom Secure PathWay. It is fast drying andincludesanapplicatorbrush.

•WaterborneAcrylicUrethane•Weight:0.5lb•Three(3)bottlesTouch-UpPaint•One(1)applicatorbrushperbottle

1.8

1.1

0.4

1.5

21S E C U R E R A C E W AY P U N C H TO O LSEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

AC

CE

SS

OR

IE

S

P R O D U C T C O D ESDS-TL-HHP

TheHolocomSecureRacewayPunchToolquicklyandaccurately punches mounting holes at the ends of the SecureRaceway.Thistool,custommadebyHolocom,savessubstantiallaboronmediumtolargejobs.Italsoimprovestheaccuracyofholeplacementtherebyreducingthelikelihoodofwasteandimprovingthefitandsecurityoftheentiresystem.

•Weight:4lbs

P R O D U C T C O D ESDS-332781 E P O X Y

SDS-332784 NOZZLE

P R O D U C T C O D ESDS-GN-EXY


858.222.6430 888.465.6266

S E C U R E R A C E W AY 3 M ® E P OX YE P OX Y N O Z Z L E

TheHolocomEpoxyGun,a3M™EPXapplicator,specificallyworkswith3MDPtwo-partepoxydispensersandisusedinapplying 3M Epoxy to the Secure Raceway.

•Plastic•Weight:1lb

KITINCLUDES:•One(1)-Applicator•One(1)-1:1Plunger•One(1)-2:1Plunger

Whenrequired,HolocomprovidesanepoxysolutionforSecure Raceway consisting of 3M™ two-part epoxy, dispensed using the 3M EPX nozzle.

•3M™DP100NSTranslucent2-partEpoxy(SDS-332781)•3MEPXmixingnozzle(SDS-332784)•Soldseparatelyindesiredquantity

E P OX Y G U N

S E C U R E R A C E W AY S PA C E R S W H I T E

P R O D U C T C O D ESDS-RW-SRJ J O I N T

SDS-RW-BRG K I T

22

TheSecureRacewayJoint(SRJ)replacestheBridgeintheRacewayAttachmentKitandmakesSecureRacewayinstallation faster and easier. The SRJ adds rigidity to all Secure Raceway end-to-end joints, and in suspended applications, replaces the Suspended Raceway Joint. The SRJ further improvesinstallationefficiencywithmountingpointsthatalign with the manufactured mounting points on the Secure Raceway. This eliminates the need for epoxy at the joint.

•Length3.75" x Width 1.8" x Height .75"•Weight.19lbeach•Notpowdercoated•16-gaugeelectro-galvanizedsteel•MountingpointsalignwithmanufacturedmountingpointsonSecureRaceway•ReplacesBridgeinRacewayAttachmentKitandSuspendedRacewayJoint•Fifty(50)perRacewayAttachmentKit(SDS-RW-AKT-03),Page18•Onehundred(100)perSecureRacewayJointKit(SDS-RW-BRG)•Availableindividually(SDS-RW-SRJ)

S E C U R E R A C E W AY J O I N TS E C U R E R A C E W AY J O I N T K I T

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

AC

CE

SS

OR

IE

S


P R O D U C T C O D ESDS-RW-SPR-WTThe Raceway Spacers are used as a standoff to provide 360-degree inspection of the Secure Raceway. They are supplied inquantitiesof100andarealsopartoftheSecureRacewayAttachmentKit(SDS-RW-AKT-02)with40Spacersperkit.RacewaySpacersareonlyavailableinaneutralwhitecolorproviding enhanced aesthetic appearance.

•1.0"x1.0"•Nylon6/6•Color:White•Totalquantity:100•Totalweight:2.5lbs

.313 DIA 1.00 DIA

6.0

P R O D U C T C O D ESDS-RW-SPR-WT6

The new, longer 6" Raceway Spacer provides a convenient solution when installing Secure Raceway on walls with uneven depthsorirregularsurfaces.Six-inchSpacerscanbecuttotherequiredlengthstherebyallowingaconsistentstandoffdepth along a section of Secure Raceway.

•6.0" x 1.0"•Nylon6/6•Color:White•Soldindividually•Totalweight:.19lbs

6" SECURE RACEWAY SPACER WHITE

1.00 DIA.313 DIA

1.0

3.75 2.7

0.5

0.313

1.8

0.75


858.222.6430 888.465.6266

4.5

4.5

2.4

234 . 5 " T R I M R I N GSEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

AC

CE

SS

OR

IE

S

P R O D U C T C O D ESDS-1003572

The4.5"TrimRingcoverstheholemadewheninstalling2"diameter Through-Wall Kits.

•20-gaugeelectro-galvanizedsteel•Length4.5"xWidth4.5"xThickness20-guage•2.4"holediameter•5TrimRingsperpackage•Totalweight:2.5lbs•PowderCoatFinish:WhiteTextured



3 . 2 5 " T R I M R I N G

The 4.5” Round Trim Ring provides an alternative to the 4.5” squareTrimRing(SDS-1003572).Liketheoriginal4.5”squareTrim Ring, the diameter of the hole is 2.4 inches and covers the hole made when installing 2” diameter Through-Wall Kits.

•18-gaugeelectro-galvanizedsteel•4.5"DiameterxThickness18-gauge•2.375holediameter•100TrimRingsperpackage•Weight.16lbeach;16lbs/pkg•PowderCoatFinish:WhiteTextured

The 3.25” round cosmetic Trim Ring covers the hole made when installing 1” diameter Through-Wall Kits through the backofSecureRacewayoraConnector.The3.25”TrimRingshouldbeusedinconjunctionwitha1”conduitlocknut(soldseparately).

•18-gaugeelectro-galvanizedsteel•3.25"DiameterxThickness18-gauge•1.375holediameter•100TrimRingsperpackage•Weight.1lbeach;10lbs/pkg•PowderCoatFinish:WhiteTextured

4 . 5 " R O U N D T R I M R I N G

4.5

2.375

3.25

1.375

2 ” T R I M R I N G


24

I N T E R FA C E S L E E V E R E D U C I N G W A S H E R

858.222.6430 888.465.6266

SEC

UR

ED

ISTR

IB

UTIO

NSYSTEM

(SD

S)

AC

CE

SS

OR

IE

S


P R O D U C T C O D ESDS-2002797The 2” Trim Ring covers the hole made when installing 1” diameter Through-Wall Kits from one section of Secure Raceway to another section of Secure Raceway or other HolocomPDScomponent.The2”TrimRingshouldbeusedinconjunctionwitha1”conduitlocknut(soldseparately).The2”Trim Ring is identical to the Interface Sleeve Reducing Washer (SDS-1002797)exceptthatithasawhitetexturedpowdercoatfinish.Suppliedfiveperpackage.

•Length1.9"xWidth1.9"xThickness16-gauge•16-gaugeelectro-galvanizedsteel•1.375holediameter•5TrimRingsperpackage•Weight:.1lbeach;.5lbs/pkg•PowderCoatFinish:WhiteTextured

N O T E S :

TheInterfaceSleeve(INF)ReducingWasheristhesamereducing washer currently contained in the #5 Through-Wall Kit(SDS-TW-005-12/24).Suppliedfiveperpackage.

•Length1.9"xWidth1.9"xThickness16-gauge•16-gaugeelectro-galvanizedsteel•Unpainted•1.375holediameter•5INFReducingWashersperpackage•Weight:.1lbeach;.5lbs/pkg

1.375

1.9

1.9

1.375

1.9

1.9

25SEC

UR

EM

IN

ID

UK

T™

O

VER

VIEW


858.222.6430 888.465.6266 0

TodiscusshowSecureMiniDukt™canbeincorporatedinto

yoursiterequirements,contactcustomerservice.

Patent Pending

S E C U R E M I N I D U K T ™

S E C U R E M I N I D U K T ™

Inresponsetocustomerrequests,HolocomengineeredS E C U R E M I N I D U K T ™ ,

areducedprofilecablecarriertouseinconjunctionwith2" x 2" Holocom Secure

Raceway. All components are powder-coated and match the aesthetics offered in

Holocom PDS. Constructed of 18-gauge galvanized steel, S E C U R E M I N I D U K T ™

meetsthe“spiritandintent”ofNSTISSI7003andoffers:

•Smallerfootprintonthewallwithoutcompromisingsecurityoruserfunctionality

•Reducednumberofpartsresultinginlaborefficiencyandsavings

•Decreasedmaterialcostincludinglowershippingcosts

•Economicuseofmaterials

Transition from 2" x 2"

Secure Raceway to

SecureMiniDukt™

TubeusingReducing

Three-Way Connector

SecureMiniDukt™

performing a right-angle

turntoaUserDropBox

.65 in.

1.40 in.

.22 in.

in.

1.8 in.

MAX = 45

60%RACEWAYUSEABLESPACE=27

MAX = 17

40% FILL = 6

1.2

C A T 6 C A B L E F I L L

1.40 in.

.65 in.

.20 in.

MULTIMODEFIBEROPTICCABLEMAX=20CABLES

40%FILL=8CABLES

1.40 in.

.65 in.

.22 in.

40%FILL=6CABLESMAX=17CABLES

CAT6UTPCABLEFILL

P R O D U C T C O D ESMD-WM-T50

26

Thewall-mountedSecureMiniDukt™Tubeisareducedprofilecablecarrierthatprovidesasmallerfootprintonthewallwithoutcompromisingsufficientcablecapacity.Constructedof18-gaugesteel,thesingle-pieceTubeenclosesandprotectssecurenetworkcablesandintegrateswithHolocomPDSSecureRaceway.WiththeadditionofotherSecureMiniDukt™components,theTubecantransitionfromSecureRacewaytoaUserDropBox.

•18-gaugeelectro-galvanizedsteel•Length59"xWidth1.5"xHeight.75"•Suppliedin10sectionsinanominal50-footkit•Totalweight:41lbs•PowderCoatFinish:WhiteTextured

T U B E

858.222.6430 888.465.6266

SE

CU

RE

M

IN

I

DU

KT

™

P R O D U C T C O D ESMD-WM-MB

P R O D U C T C O D ESMD-MB-3WY

TheSecureMiniDukt™MountingBracketservesadualpur-posebyprovidingtheinstallationpointforattachingSecureMiniDukt™TubetothewallandsecurelyholdingtwoendsofTubetogether.EMT,bycontrast,requiresbothstrapsand connectors to achieve a secure attachment to the wall. Thetwo-pieceMountingBracketcontainsabuilt-instopperonbothsidesofthemanufacturedmountingpoint.Thissimplifiesinstallationandallowsfora2"overlapofTubeor090ConnectorwiththeMountingBracketwithoutcoveringthehole.TheMountingBracketBridgealignswiththestopperinsidetheMountingBracket,coversthemountingpoint,andprovides security.

•Length5"xWidth1.6"xHeight.9"•18-gaugeelectro-galvanizedsteel•Weight.34lbs•Manufacturedmountingpointalongcenterline•MountingBracketBridgecoversmountingpointandprovidessecurity•PowderCoatFinish:WhiteTextured

TheT-shapedSecureMiniDukt™MountingBracketThree-WayConnector provides a right angle drop from two sections of SecureMiniDukt™(SMD)TubetoaUserDropBox(SEC-WM-UDB3-H1).Thenewtwo-piececonnectorcontainstwomanufactured mounting points for easy installation and servesasamountingbracketfortwosectionsofTube.Themountingbracketbridgeslidesinsidetheconnector,coversthe mounting points, and provides a two-inch overlap with SMDTubeateachend.

•Length1.6"xWidth8"xDepth.9"•18-gaugeelectro-galvanizedsteel•Weight0.8lbs•Twomanufacturedmountingpointsalongracewaycenterline•Mountingbracketbridgecoversmountingpointsand provides security•PowderCoatFinish:WhiteTextured

M O U N T I N G B R A C K E T

M O U N T I N G B R A C K E T T H R E E - W AY C O N N E C TO R


5.0

1.6

.9

.625 DIA

MOUNTINGBRACKET

MOUNTINGBRACKETBRIDGE

59 INCHES.75

1.5

P R O D U C T C O D ESMD-3WY-REC-LTSMD-3WY-REC-RT

T H R E E - W AY R U N E N D C O N N E C TO R L E F T

T H R E E - W AY R U N E N D C O N N E C TO R R I G H T

R E D U C I N G T H R E E - W AY C O N N E C TO R

P R O D U C T C O D ESMD-CT-3WY

The Reducing Three-Way Connector provides the transition between2" x 2"SecureRacewayandSecureMiniDukt™,usuallyleadingtoaUserDropBox.ThisT-shaped,two-piececonnectorconsistsofa16-gaugebaseandcoverandan18-gaugetransitiontubeweldedtothebase.InstallationbetweentwosectionsofSecureRacewayrequiresoneSteelLockingKit(SDS-LK-KIT-ST),oneEnd-To-EndConnector(SDS-CT-EE6-ST)andtwoSecureRacewayJoints(SDS-RW-SRJ).Whenusedat the end of a Secure Raceway run, the installer would use oneSteelLockingKit,oneEnd-to-EndConnector,twoSecureRacewayJoints,andoneRunEndConnector(SDS-WM-REC)to complete the run.

•16-gaugeelectro-galvanizedsteeland18-guagetransitiontube•Length8"xWidth1.9"xDepth1.8"•Weight1.5lbs•Twomanufacturedmountingpointslocatedalongbasecenterline•PowderCoatFinish:WhiteTextured

27S

EC

UR

E

MI

NI

D

UK

T™

P R O D U C T C O D ESMD-CT-INF

TheSecureMiniDukt™InterfaceSleeve(INF)isdesignedtotransitionSecureMiniDukt™TubetoaSecureEnclosure.The18-gauge INF contains 1” internal threads and is supplied with a1”NPTthreadednipple,1”conduitlocknut,and1”conduitbushing.

•Electro-galvanizedsteel•1”NPTinternalthreads•TotalWeight.4lbs•Includes: - Interface Sleeve - 1” NPT threaded nipple -1”conduitlocknut -1”conduitbushing•PowderCoatFinish:WhiteTextured


858.222.6430 888.465.6266

I N T E R FA C E S L E E V E

INTERNALLYTHREADEDINTERFACESLEEVE

1"NPTTHREADEDNIPPLE

1"CONDUITBUSHING

1"CONDUITLOCKNUT

6.0

8.0

1.8

REDUCING3-WAYCOVER

REDUCING3-WAYBASE

TheSecureMiniDukt™Three-WayRunEndConnectorcombinestwoproducts—theReducingThree-WayConnector(SMD-CT-3WY)andRunEndConnector(SDS-CT-REC)—intoasingleproductusedtoendasectionofSecureRacewaywithaSecureMiniDukt™userdrop.Thenewconnectorimproveslaborefficiencybyeliminatingthreeproductspreviouslyrequiredforinstallation.Two(2)manufacturedpointsalongthebasecenterlineprovideadditionalsimplifiedlabor-savinginstallation.ToconnecttheThree-WayRunEndConnectortoasectionof2"x2"SecureRaceway,useoneSecureRacewayJoint(SDS-CT-SRJ)andoneEnd-to-EndConnector(SDS-CT-EE6-ST).UsetheSMD-3WY-REC-LTforracewayrunsthatendto the left. Use the SMD-3WY-REC-RT for raceway runs that end to the right.

•16-gaugeelectro-galvanizedsteelwith18-gaugetransitiontube•Weight2.0lbs•Two(2)manufacturedmountingpointsalongbasecenterline•Soldindividually•PowderCoatfinish:WhiteTexturedSMD-3WY-REC-RT

SMD-3WY-REC-LT

1.9

TheSecureMiniDukt™90°ConnectorallowsSecureMiniDukt™Tubetoperformaright-angleturnwhiletravelingonaflatsurface.The90°Connectorfeaturesa3”bendradiusallowingsmoothmovementofcablingacrossthebend.InstallationrequirestwoSecureMiniDukt™MountingBrackets(SMD-WM-MB)totransitionbetweentwosectionsofTube.

•18-gaugeelectro-galvanizedsteel•Length5”xWidth5”xDepth.75”•Weight.5lbs•PowderCoatFinish:WhiteTextured

TheSecureMiniDukt™90°CornerConnectorallowsSecureMiniDukt™Tubetoperformaright-angleturnonaninsideoroutside corner. This compact, versatile connector provides a 3-inchbendradiusallowingsmoothmovementofcableacrossthecorner.Two(2)SecureMiniDukt™MountingBrackets(SMD-WM-MB)–oneforeachendoftheCornerConnector–arerequiredtomounttheConnectorandTubetothewall.

•18-gaugeelectro-galvanizedsteel•Requires2SecureMiniDuktMountingBrackets(SMD-WM-MB), sold separately•Weight.5lbs•PowderCoatFinish:WhiteTextured

P R O D U C T C O D ESMD-CT-INF-90

P R O D U C T C O D ESMD-CT-090

28

9 0 º C O N N E C TO R

858.222.6430 888.465.6266

SE

CU

RE

M

IN

I

DU

KT

™

P R O D U C T C O D ESMD-CT-90C

9 0 º C O R N E R C O N N E C TO R


5.0

5.0

1.5

.75

2.0

3"RADIUS

TheSecureMiniDukt™90°InterfaceSleeve(INF)providesaseamless 90° transition from a Secure Enclosure or Through-WallKittoSecureMiniDukt™Tube.Theinternallythreaded90°INFhasa45°angledbendintheconnectorbodyallowingsmoothmovementofcablingacrossthebend.The90°INFissupplied with a 1” NPT threaded nipple, 1”conduitlocknut,and 1”conduitbushing.ItcanbeusedinconjunctionwithThrough-Wall Kits 1, 5, 6, and 7.

•Electro-galvanizedsteel•1”NPTinternalthreads•TotalWeight.5lbs•Includes: - 90° Interface Sleeve - 1” NPT threaded steel pipe -1”conduitlocknut -1”conduitbushing•PowderCoatFinish:WhiteTextured

9 0 º I N T E R FA C E S L E E V E

INTERNALLYTHREADED90DEGREEINTERFACESLEEVE

1"NPTTHREADEDNIPPLE

1"CONDUITLOCKNUT

1"CONDUITBUSHING

The#6SecureMiniDukt™(SMD)Through-WallKitprovidesa1”through-wallpathwayconnecting:•SMDTubetoSMDTube•SMDTubetoaSMDconnector

Itissuppliedinkitswith12”or24”NPTthreadedpipeandtwoSMDInterfaceSleeves.TheSecureMiniDukt™INFisdesignedwith internal rather than external threads. This maximizes installationefficiencyinconcretewallsbyeliminatingtheneedfora larger diameter coupler and corresponding larger concrete core.

12”•Galvanizedsteelthreadedpipe•Totalweight:1.6lbs


•One(1)-1”x12”NPTthreaded pipe•Two(2)–SecureMiniDukt™ Interface Sleeves

# 6 T H R O U G H - W A L L K I T 29

G Y P S U M AT TA C H M E N T K I T

SE

CU

RE

M

IN

I

DU

KT

™

P R O D U C T C O D ESMD-GYP-AKT

TheSecureMiniDukt™GypsumAttachmentKitcontainsthematerialsnecessarytoproperlyattachSecureMiniDukt™togypsum dry walls, hollow walls, panel walls, or steel studs. One Gypsum Attachment Kit supports the installation of 50 feet of SecureMiniDukt™Tubesuppliedinonekit(SMD-WM-T50).Note that 1” standoff spacers are included and are the same itemsuppliedintheRacewayAttachmentKit(SDS-RW-AKT-02).

Eachkitincludes:•Twentyfive(25)¼-20ToggleBolts•Twentyfive(25)¼-20x3”PanPhillipsscrews•Five(5)¼-14x3”TEKHexWasherHeadscrews•Twenty(20)Nylon6/6WhiteRacewaySpacers

Totalweight:4.5lbs


858.222.6430 888.465.6266

INTERNALLYTHREADEDINTERFACESLEEVEX2


P R O D U C T C O D ESMD-TW-006-12/24

24”•Galvanizedsteelthreadedpipe•Totalweight:2.6lbs


•One(1)-1”x24”NPTthreaded pipe•Two(2)–SecureMiniDukt™ Interface SleevesSee:www.holocom.com/throughwall.htmlforinstallationinstructions.


P R O D U C T C O D ESMD-TW-007-12/24

Theupdated#7SecureMiniDukt™(SMD)Through-WallKitprovides a 1” through-wall pathway in multiple installation scenarios,including:•SMDTubetoSDS2”x2”SecureRacewayorSecureLargeCarrier(SLC)Raceway•SMDTubewithSMDConnectortoSDS2”x2”Racewayor SLC Raceway•SMDTubetoaUserDropBoxorotherenclosure

The newer components provide maximum inside diameter, smoothercablemovement,andpowder-coatedtrimringandcouplerforamorefinishedappearance. 12”•Galvanizedsteelthreadedpipe•Totalweight:2lbs

THROUGH-WALLKITINCLUDES:•One(1)–1”x12”NPT threaded pipe•One(1)–1”conduitbushing•One(1)–1”conduitlocknut•One(1)–1”Chasenipple•One(1)–1”NPTpowder-coated coupler •One(1)trimring•OneSMDInterfaceSleeve

24”•Galvanizedsteelthreadedpipe•Totalweight:3lbs

THROUGH-WALLKITINCLUDES:•One(1)–1”x24”NPT threaded pipe•One(1)–1”conduitbushing•One(1)–1”conduitlocknut•One(1)–1”Chasenipple•One(1)–1”NPTpowder-coated coupler•One(1)trimring•OneSMDInterfaceSleeveSee:www.holocom.com/throughwall.htmlforinstallationinstructions.

1"CONDUITNUT

1"CONDUITBUSHING

1"NPT12"/24"THREADEDPIPETRIM RING


1"CHASENIPPLE

INTERNALLYTHREADEDINTERFACESLEEVE

30

858.222.6430 888.465.6266

SE

CU

RE

M

IN

I

DU

KT

™


N O T E S :

P R O D U C T C O D ESMD-CON-AKTTheSecureMiniDukt™ConcreteAttachmentKitcontainsthenecessarymaterialstoproperlyattachSecureMiniDukt™toconcreteorsolidblockwalls.OneConcreteAttachmentKitsupportstheinstallationof50feetofSecureMiniDukt™Tubesuppliedinonekit(SMD-WM-T50).Notethat1”standoffspacers are included and are the same item supplied in the RacewayAttachmentKit(SDS-RW-AKT-02).

Eachkitincludes:•Ten(10)¼”x2¼”HexWasherHeadconcretescrews•Twentyfive(25)¼”x3¼”HexWasherHeadconcretescrews•Ten(10)¼”x5”HexWasherHeadconcretescrews•One(1)3/16”x8”Masonrydrillbits•One(1)5/16”x8”Masonrydrillbits•Twentyfive(25)Alligator®flangeanchors•Twenty(20)Nylon6/6WhiteRacewaySpacers

TotalWeight:3.5lbs

C O N C R E T E AT TA C H M E N T K I T

31SEC

UR

ELA

RG

EC

AR

RIER

™O

VER

VIEW


858.222.6430 888.465.6266

S E C U R E L A R G E C A R R I E R ™

S E C U R E L A R G E C A R R I E R ™

IntroducingSECURELARGECARRIER™,thenewlargecaliberracewayfromHolocom®.

SECURELARGECARRIER™providesmorethanseventimesthecablecapacityof

industrystandardHolocom2"x2"SecureRaceway,makingittheperfectbackbone

carrierforhomeruncabledesignsystems.WithSECURELARGECARRIER™,2"x2"

SecureRaceway,andSecureMiniDukt™usersnowhaveacompletecomplementof

HolocomcablecarrieroptionsforProtectiveDistributionSystem(PDS)design.

TodiscusshowSecureLargeCarrier™canbeincorporatedinto

yoursiterequirements,contactcustomerservice.

Patent Pending

F e a t u r e s

•Morethan7xthecapacityofHolocom2"x2"SecureRaceway

•Powdercoated,tamperevidentfinish

•Usedasabackbonecarrierforhomeruncabledesignsystems

•Interlockingpartsallowmoves,adds,andchanges(MACs)

•FamiliarHolocompatentedlockingtechnology,drop-incable

installationandinstaller-friendlymountingtechniques

S p e c i f i c a t i o n s

•16-gauge,electro-galvanizedsteel

•6"x3.5"two-piecesecureraceway

•MAX200CAT6cablecapacity

•Integrateswith2"x2"SecureRaceway

andSecureMiniDukt™

•Whitetexturedpowder-coatfinish

•Suppliedin5'sectionsina20'kit

B e n e f i t s

•Satisfieshigh-densitycablecountrequirements

•EnhancesinspectionandNSTISSI7003compliance

•Eliminatestheneedformultipleparallelsmallercablecarriers

•Allowstrueinspectionofcables/connections&reducesPDSlifecyclecosts

•Reducesinstallationtimeandcost

.65 in.

1.4 in.

. .

1.8 in.

. .

1.2 in.

5.9 in.

1.44 in .

.28 in

28 in

28 in

.

2.7 in.

SECURE LARGE CARRIER™

2"x2"SECURERACEWAY

MAX=20160% FILL=120

MAX=2860% FILL=17

MAX=1040% FILL=4

HOLOCOM®CABLECARRIEROPTIONS

CAT6CableFill

SECURE MINI DUKT™

The Secure Large Carrier™ Secure Raceway Joint adds rigidity to all Secure Large Carrier™ Raceway or Connector end-to-endjoints.Two(2)manufacturedmountingpointsalign with the MMPs on the Secure Large Carrier™ Mounting BracketandRacewayorMountingBracketandConnector(SLC-CT-90i/SLC-CT-90e)allowingsimplified,labor-savinginstallation.

•12-gaugeelectro-galvanizedsteel•Weight1.5lbs•Two(2)manufacturedmountingpoints•Packagedindividually•Notpowdercoated

TheSecureLargeCarrier™MountingBracketprovidesthreedistinct functions. It holds two ends of connected raceway, provides the raceway installation point, and stands the racewayoneinchoffthewall.TheMountingBrackethasfour(4)integratedone-inchspacersandfour(4)manufacturedmountingpointsforsimplified,labor-savinginstallation.Thetwo upper mounting points align with the mounting points on the two ends of adjoining raceway or connector.

•16-gaugeelectro-galvanizedsteel•Four(4)manufacturedmountingpointsincludingtwo(2) manufactured mounting points that align with each adjoining section of raceway•Fourintegratedone-inchspacersallow360°inspection•Packagedindividually•Weight1.75lbs•PowderCoatFinish:WhiteTextured

P R O D U C T C O D ESLC-WM-RCW-ST-20

32

SecureLargeCarrier™Racewayprovidesmorethanseven(7)timesthecablecapacityofindustrystandardHolocomSDSSecureRaceway,makingittheperfectbackbonecarrierforhomeruncabledesignsystems.LikeSDSSecureRaceway,itusesthepatentedHolocomlockingsystemenablinguserstomakemoves,adds, and changes. One manufactured mounting point at each end oftheracewayalignswiththeMountingBracketforsimplified,labor-savinginstallation.Kitincludesfour(4)SecureRacewayJoints(SLC-RW-SRJ).

•16-gaugeelectro-galvanizedsteel•Components: -Raceway:Length59” x Height 6” x Width 3.4” -TopCap:Length59”xHeight2”xWidth1.8” -SecureRacewayJoint(SLC-RW-SRJ):Four(4)•Max200CAT6cablecapacity•IntegrateswithSDSSecureRaceway&SecureMiniDukt™•Onemanufacturedmountingpoint1.5”fromeachracewayend•Suppliedin5’sectionsina20’kit•Totalkitweight:97pounds•PowderCoatFinish:WhiteTextured

R A C E W AY & TO P C A P K I T

858.222.6430 888.465.6266

SE

CU

RE

L

AR

GE

C

AR

RI

ER

™

P R O D U C T C O D ESLC-WM-MB

M O U N T I N G B R A C K E T


P R O D U C T C O D ESLC-RW-SRJ

S E C U R E R A C E W AY J O I N T

6.0

3.4

1.5

1.5

59.0 INCHES

1.8

2.0

59.0 INCHES

RACEWAY

TOPCAP

TheversatilePB0allowsSecureLargeCarrier™(SLC)tocrosshallways, transition from a comm room, and transition to SDS RacewayandSecureMiniDukt™(SMD)Tube.IthasanintegratedInterfaceSleeve(INF)oneachsideforSLCRaceway,andtwoTopCapstarterpiecesforinstallingtheSLCLockKit.TheINFassemblyiseasilyremovedifunused,andright/leftreplacementBlankFlangesareincluded.ThePB0allowsSDSRacewayandSMDTubetoexitthroughthefrontoneithersideofthedooropeningaswellasthroughthetop,bottom,orsides(withBlankFlange).Tamperresistantdoorhasinternalspringhingeandpro-prietarybackflangeandisidenticaltotheUserDropBoxdoors.

•Height8”xWidth12.4”xDepth5.6”•16-gaugeelectro-galvanizedsteel•Two(2)integratedInterfaceSleeves(SLC)•Singledrop-downdoorwithinternalspringhingeand hasp for Sargeant & Greenleaf ®padlock•Includestwo(2)BlankFlanges,leftandright•Includestwo(2)TopCapStarterpieces•Totalweight:11.5lbs•PowderCoatFinish:WhiteTextured

The Secure Large Carrier™ End-To-End Connector securely joins two sections of Secure Large Carrier™ TopCap, or SecureLargeCarrier™Connector(SLC-CT-90i /SLC-CT-90e)cover and TopCap.

•16-gaugeelectro-galvanizedsteel•Weight:1lb•Packagedindividually•PowderCoatFinish:WhiteTextured

P R O D U C T C O D ESLC-LK-KIT

TheSecureLargeCarrier™LockKitusesthesamepatentedlockingtechnologyusedwithHolocom2”x2”SecureRaceway.TheLockKitconsistsoftwoparts:RacewayLockConnectorandLockBodyAssembly.Whenin“lock-down”position,theentireracewayissecureandtheenclosedcablesareprotected.Releasingthelockenablestheracewaytoundergomoves,adds,andchanges(MACs).

•16-gaugeelectro-galvanizedsteel•Components:-RacewayLockConnector-LockBodyAssemblywith30”lanyard•TotalWeight:1lb•PowderCoatFinish:WhiteTextured(LockConnector)

L O C K K I T

P R O D U C T C O D ESLC-CT-EE6

E N D - TO - E N D C O N N E C TO R

P R O D U C T C O D ESLC-WM-PBO-H1

P U L L B OX 0

33S

EC

UR

E

LA

RG

E

CA

RR

IE

R™


858.222.6430 888.465.6266

8.0

12.4

5.6

BLANKFLANGELEFT/RIGH T

TOPCAP STARTER

The two-piece Secure Large Carrier™ 90° External Connectorallows Secure Large Carrier™ Raceway to perform a right-angle turn on an outside corner. The 90° External Connector has the same height/width dimensions as Secure Large Carrier™ Raceway/TopCapandsitsinsidetheMountingBracketforeasyinstallation.Two(2)manufacturedmountingpointsalignwithmountingpointsontheMountingBracketforsimplified,labor-savinginstallation.A3”bendradiusallowssmoothcablemovement across the connector.

•16-gaugeelectro-galvanizedsteel•Two-piececonstruction•3”bendradiusallowssmoothcablemovement•Weight:4.75lbs•Two(2)labor-savingmanufacturedmountingpoints, one at each end•PowderCoatFinish:WhiteTextured

P R O D U C T C O D ESLC-CT-90i

34

The two-piece Secure Large Carrier™ 90° Internal Connector allows Secure Large Carrier™ Raceway to perform a right-angle turn on an inside corner. The 90° Internal Connector has the same height/width dimensions as Secure Large Carrier™ Raceway/TopCapandsitsinsidetheMountingBracketforeasyinstallation.Two(2)manufacturedmountingpointsalignwithmountingpointsontheMountingBracketforsimplified,labor-savinginstallation.A3”bendradiusallowssmoothcablemovementacrosstheconnector.

•16-gaugeelectro-galvanizedsteel•Two-piececonstruction•3”bendradiusallowssmoothcablemovement•Weight:4lbs•Two(2)labor-savingmanufacturedmountingpoints, one at each end•PowderCoatFinish:WhiteTextured

9 0 º I N T E R N A L C O N N E C TO R

858.222.6430 888.465.6266

SE

CU

RE

L

AR

GE

C

AR

RI

ER

™

P R O D U C T C O D ESLC-CT-90e

9 0 º E X T E R N A L C O N N E C TO R


The Secure Large Carrier™ Run End Connector Left/Right with welded end cap is used to end a run of Secure Large Carrier™ Raceway.Two(2)manufacturedmountingpointsallowsimplified,labor-savinginstallation.Theuppermountingpointalignswith the mounting point on the end of adjoining raceway. Four (4)integratedone-inchspacersstandtheconnectorandraceway off the wall. The Run End Connector also allows a transition to a 1” Through-Wall Kit. Use the Run End Connector Left(SLC-CT-REC-LT)forracewayrunsthatendtotheleft.UsetheRunEndConnectorRight(SLC-CT-REC-RT)forracewayruns that end to the right.

•16-gaugeelectro-galvanizedsteel•Two(2)manufacturedmountingpoints•Four(4)integratedone-inchspacersallow360°inspection•Packagedindividually•Weight:2.75lbs•PowderCoatFinish:WhiteTexturedKit.

P R O D U C T C O D ESLC-CT-REC-LTSLC-CT-REC-RT

R U N E N D C O N N E C TO R L E F TR U N E N D C O N N E C TO R R I G H T

LEFT RIGHT

LEFT

2"NPTCOUPLER

RIGHT

2"NPTCOUPLER

SE

CU

RE

L

AR

GE

C

AR

RI

ER

™35

TheSecureLargeCarrier™toSecureMiniDukt™DropCon-nectorprovidesthetransitionbetweenSecureLargeCarrier™RacewayandSecureMiniDukt™,usuallyleadingtoaUserDropBox.Installationrequirestwo(2)MountingBrackets(SLC-WM-MB),two(2)SecureRacewayJoints(SLC-RW-SRJ),andTopCapfromtheSLCRacewayKit(SLC-WM-RCW-ST-20).Two(2)manufacturedmountingpointsalignwiththeMountingBracketsallowingsimplified,labor-savinginstallationandaone-inch standoff.

•16-gaugeelectro-galvanizedsteelonSLCcomponent•18-gaugeelectro-galvanizedsteelonSMDcomponent•Two(2)manufacturedmountingpoints1.5”fromeachend•Weight2.5lbs•PowderCoatFinish:WhiteTextured

The Secure Large Carrier™ Through-Wall Trim Plate Kit covers the hole made when installing a section of Secure Large Carrier™ Raceway through a wall. The two-piece Trim Plate Kit coverstheholeonbothsidesofthewall.

•16-gaugeelectro-galvanizedsteel•Weight1.5lbs•Packagedwithtwo(2)trimplatesperkit•PowderCoatFinish:WhiteTextured

P R O D U C T C O D ESLC-TWK-REC-LTSLC-TWK-REC-RT

The dual function Secure Large Carrier™ Through-Wall Run End Connector provides a solution for ending a section of Secure Large Carrier™(SLC)Racewaywithinahallwayorroomandoffersaninte-grated 2” through-wall to transition to 2”x 2” Secure Raceway or other Holocom PDS component. Two manufactured mounting points allow simplified,labor-savinginstallation.Theuppermountingpointalignswith the mounting point on the end of the adjoining SLC Raceway. Four(4)integratedone-inchspacersstandtheconnectorandracewayoff the wall and allow 360° inspection. Use in conjunction with SLC SecureRacewayJoint(SLC-RW-SRJ)and#2Through-WallKit(SDS-TW-002-12/24).UsetheLeftConnectorforracewayrunsthatendtotheleft. Use the Right Connector for raceway runs that end to the right.

•16-gaugeelectro-galvanizedsteel•One2”NPTcouplersuppliedwitheachconnector•Two(2)manufacturedmountingpoints•Four(4)integratedone-inchspacers•UsewithSecureRacewayJoint(SLC-RW-SRJ)and#2Through-WallKit(SDS-TW-002-12/24)•Packagedandsoldindividually•Weight3.9lbs•PowderCoatFinish:WhiteTextured

T H R O U G H - W A L L R U N E N D C O N N E C TO R

P R O D U C T C O D ESLC-TWK-TP

T H R O U G H - W A L L T R I M P L AT E K I T

P R O D U C T C O D ESLC-SMD-DP

S M D D R O P C O N N E C TO R


858.222.6430 888.465.6266

LEFT RIGHT

36

858.222.6430 888.465.6266

SE

CU

RE

L

AR

GE

C

AR

RI

ER

™


N O T E S :

P R O D U C T C O D ESLC-RTF-INF-LTSLC-RTF-INF-RTTheRetrofitInterfaceSleevefitsanysecureenclosurewithadepthofsix(6)inchesorgreaterandwasdesignedforinstallationscenarioswhentheSecureLargeCarrierPullBox0(SLC-WM-PB0-H1)istoosmallfortheamountofcabling.TheRetrofitInterfaceSleeveprovidesanexitforsecurenetworkcablesfromeithertheleftorrightsideoftheenclosure.ApaperinstallationtemplateissuppliedwiththeRetrofitInter-face Sleeve ensuring accurate positioning on the enclosure.Additionalcopiesofthetemplateareavailableat:http://holocom.com/pdfs/SLC-RTF-INF-TEMPLATE.pdf

•16-gaugeelectro-galvanizedsteel•Fitssecureenclosureswithadepthofsix(6)inchesorgreater•Suppliedwithpaperinstallationtemplate•SoldindividuallyasSLC-RTF-INF-LTorSLC-RTF-INF-RT•Weight1.5lbs•PowderCoatFinish:WhiteTextured

R E T R O F I T I N T E R FA C E S L E E V E

N O T E S :S

EC

UR

E

LA

RG

E

CA

RR

IE

R™

37


858.222.6430 888.465.6266

Holocom products protected by US Pats. D619,097; D632,763; D580,871; 7,608,780; 7,661,375; 7,183,488;

7,115,814; 7,053,303; 7,049,517; 6,838,616; 5,831,211 and Pats pending. Made in the U.S.A. Holocom and

the Holocom logo are registered trademarks of Holocom, Inc. Other noted marks are trademarks of

their respective companies.

© 2013 Holocom, Inc. All Rights Reserved.

A B O U T H O L O C O M

Holocom is the only manufacturer to offer all four Protective Distribution Systems (PDS) solutions approved for SIPRNet and other classified networks:

• Holocom PDS – the industry de facto standard hardened carrier• Holocom PDS plus alarm for fiber & copper networks• Alarm plus interlocking armored fiber cable• Retrofit alarm for non-compliant PDS

Holocom’s complete PDS product offering enables customers to meet site and security requirements and conform to the specifications outlined in NSTISSI 7003 and the individual service branch documents.

Tol l Free: 888.465.6266 | www.holocom.com | [email protected]

HEADQUARTERS

8360 Camino Santa Fe

Suite F

San Diego, CA 92121

Tel: 858.222.6430

Fax: 858.222.6431

P R O D U C T C ATA L O G For Every PDS Solution Product Catalog Spring 201… · HOLOCOM – THE...

Documents

Transcript of P R O D U C T C ATA L O G For Every PDS Solution Product Catalog Spring 201… · HOLOCOM – THE...