OPTICS:

MECHANICAL:

AMBIENT TEMPERATURE RATINNGG::-

HIGH-OUTPUT SAMSUNG LEDD CCHIPSHIPS

HIGH-TEMP OSRAM DRIVERS

COMPONENTS:

INSTALLATION:

S

EXCEEDS IMPACT RATING OFF IKIK1100TRUCTRUCTIONTIONEXTRUDED ALUMINUM CONS

STAINLESS STEEL HARDWARE

ISOLATED DRIVER CHANNELS

THERMALLY INDEPENDENT EHEATAT SSINKINK LEDLED BARBARSS

BRIGHT DIP ANODIZED FOR CORRCORROSIONOSION RESISRESISTANCETANCE

40°F TO 150°F,N-40°C TOO 65. 65.5°C5°C

AIRCRAFT CABLE SUSPENSIONN

SURFACE MOUNTING

RIGID PENDANT

CUSTOM MOUNTS AVAILABLE, CONTACT FACTORY

LED BARS ARE ROTATABLE FOROR CUSCUSTOMTOM LIGLIGHTHT DISTRIBDISTRIBUTIONUTION

OPTIONAL NARROW REFLEC FOFORR AISAISLELE APPLICAPPLICATIONSATIONSTOTORR

WIDE 120° BEAM ANGLE FOR MAXIMUM UNIFORMITY

DIFFUSE LENSING AVAILABLE ININ CCLEARLEAR ANDAND WHITWHITEE

OPTIONAL POLYCARBONATE OORR ACACRYLICRYLIC LENLENSESSES

WRAP-AROUND LENS OFFERS UUPP TTOO 10% 10% UPLIUPLIGHTGHT

LISTINGS AND RATINGS:

PERFORMANCE:

120-277VAC STANDARD / 347-480VAC OPTIONAL0-10V, 10% DIMMING DRIVERS STANDARD

ELECTRICAL:

FIXTURE DIMENSIONS:24”L X (12-24)”W X 2.5”H

18-24LBS SEE ASSEMBLY CONFIGURATIONS BELOW

WARRANTY:10-YEAR WARRANTY ON FIXTURE BODY

5-YEAR WARRANTY ON ELECTRONICS

FOR SPECIAL REQUESTS, CONTACT FACTORY

UL 1598 FOR DRY, DAMP, WET, AND CANOPY LOCATIONSARRA COMPLIANT (MADE IN AMERICA)IP 56 RATEDUL EPH LISTED - NSF RATEDDLC PREMIUM LISTED3G VIBRATION RATING

24,620 NOMINAL LUMENS (5000K, NO LENS)163 WATTS

151 LUMENS PER WATT

TM-21: L70 >72,000 HOURS

CALCULATED L70 >147,000 HOURS SPACING

IK10 PLUS HIGH LUMEN SERIESHIGH-BAY LED LUMINAIRE SPECIALIZING IN HIGH-ABUSE APPLICATIONS. INTENDED FOR GYMNASIUMS, NATATORIUMS, MANUFACTURING AND INDUSTRIAL

FACILITIES, WAREHOUSES, CONVENTION CENTERS AND OTHER HIGH-CEILING APPLICATIONS.

CONTROLSEMERGENCY

BACKUP

CHANNEL

ACCESS

BAR

AIMINGFINISH MOUNTING

CUSTOM

FIXTURE

OUTPUT

LUX dynamics 1350 Capital Blvd, Reno, NV 89502 Phone: 775.200.0707 Fax: 775.313.0888 www.luxdynamics.com

OUTPUT

L- HIGH LUMEN

ELECTRONIC

CHANNELSMODULE

HO3

HIGH

OUTPUT

GEN. 3

MFR

LUX

SERIES

IK10P

IK10+

VOLTAGE

DIMMING

120-277VU1010% dim

U11% dim

UXno dimming

347-480VH1010% dim

H11% dim

HXno dimming

NARROW

OPTICS

NRWSECONDARY

NARROW

OPTIC MAY

BE USED

ON SOME OR

ALL BARS OF

FIXTURE.IF MIXED

DISTRIBUTION

IS REQUIRED,PLEASE

COORDINATE

WITH

FACTORY

TO SPECIFY

LENGTH

2’

ASSEMBLY

CONFIG.

ABCDEFG

PLACEMENT OF BARS/CHANNELSIN FIXTURE BODY.SEE BELOWFOROPTIONS.

CRI

CCT

850840835830

NUMBER

OF BARSLENS

NLCA2WA2 CP2WP2

CORD

3/104/105/106/10

WIRES 3 TO 6 LENGTH 10’,15’ 20’,30’

PROJECT NAME: NOTES:TYPE:

DLH DAYLIGHT

SENSOR

OCCOCCUPANCY

SENSOR

D/O DAYLIGHT

AND

OCCUPANCY

WCMWIRELESS

CONTROL

E M 1 0 10W

BATTERY

E M 1 5 15W

BATTERY

TOPBOT

DIR0°NADIR

IND180°NADIR

XXX/AIM FIELD-AIMABLE

LED BARS

CLD CUSTOM LIGHT

DISTRIBUTION

COORDINATE WITH FACTORY

STNDMFHBCC

CABLE: H10-18Y H10-18Y T H4P10 H4P10SSPENDANT: MH1P MH2P SPMSURFACE: SM UH2 UH4

SEE MOUNTING DETAILS (PG2)

FOR AVAILABLEOPTIONS

PLEASE

NOTE

DELIVERED

LUMENS

ABOVE

LUX -SINGLE

-DOUBLE

-TRIPLE

2 SDT

2’

END CAP

CHANNEL

LID

HANGING

BRACKETS

BAR

(NO LENS) - NOMINAL, NO LIGHT LOSS(CLEAR ACRYLIC) - 9% LIGHT LOSS(WHITE/FROSTED ACRYLIC) - 16% LIGHT LOSS(CLEAR POLYCARBONATE) - 14% LIGHT LOSS

(WHITE/FROSTED POLYCARBONATE) - 22% LIGHT LOSS

LENS PERFORMANCE DATA

5000K - STANDARD/NOMINAL4000K - 4% LIGHT LOSS3500K - 6% LIGHT LOSS3000K - 8% LIGHT LOSSOTHER CCT AVAILABLE,CONTACT FACTORY

CCT PERFORMANCE DATA

CRI PERFORMANCE DATA80 CRI - STANDARD/NOMINAL90 CRI - 6% LIGHT LOSSOTHER CRI AVAILABLE, CONTACT FACTORY

NLCAXWAXCPX

WPX

CHANNEL AND ASSEMBLY CONFIGURATION: STND-STANDARD:

-LUX GREEN HANGING BRACKETS-BRIGHT DIP ANODIZED EXTRUSIONS-QUALIFIES AS NATATORIUM RATED-IF INSTALLED IN A NATATORIUM,LUX RECOMMENDS STAINLESS STEELMOUNTS.

MFHB-HANGING BRACKETS:-MILL FINISH HANGING BRACKETS-BRIGHT DIP ANODIZED EXTRUSIONS

CC-CUSTOM COLOR:-2MIL NATATORIUM-GRADEPOWDERCOATED COMPONENTSIN ANY COLOR.-PLEASE SPECIFY RAL NUMBER ANDCOMPONENTS TO BE FINISHED WHENORDERING.

FIXTURE “FINISH” DETAILS

CORD DATA3 WIRE - SINGLE LEG ON/OFF SWITCH 4 WIRE - DUAL LEG SWITCH, OR SINGLE

SWITCH WITH EMERGENCY BATTERY5 WIRE - SINGLE LEG SWITCH WITH DIMMING6 WIRE - DUAL LEG SWITCH WITH DIMMING OR

SINGLE SWITCH WITH EMERGENCY BATTERY

CHANNEL ACCESSTOP - FIXTURE CHANNEL ACCESSIBLE FROM ABOVE, NOT AVAILABLE ON SURFACE MOUNTS.BOTTOM - FIXTURE CHANNEL ACCESSIBLE FROM BELOW.

APPLI-CATION

ARCHAFHGENGYMHNGICEMFGNATTCWHS

Revised 4.14.20

CUSTOM CONFIGURATIONS AVAILABLE, CONTACT FACTORY

APPLICATION TYPE:- ARCHITECTURAL

- ARENA/FIELDHOUSE

- GENERAL

- GYMNASIUM

- HANGAR

- ICE RINK

- MANUFACTURING

- NATATORIUM

- TENNIS COURT

- WAREHOUSE

ARCHAFHGENGYMHNGICEMFGNATTCWHS

L 2

SASBDADBTA

12”W, 7LBS

12”W, 7LBS

18”W, 10LBS

18”W, 10LBS

24”W, 13LBS

LUX dynamics 1350 Capital Blvd Reno, NV 89502 Phone: 775-200-0707 Fax: 775-313-0888 www.luxdynamics.com

CONTROL TYPE PIR/PHOTOCELL 1-10v CONTROL TYPE PIR LINE VOLTAGE

AMBIENT TEMPERATURE 5°C TO 55°C AMBIENT TEMPERATURE-10°C TO 60°C, LOW TEMP OPTION AVAILABLE

MOUNTING HEIGHT 8' TO 40' MOUNTING HEIGHT 15' TO 40'

APPROX. LUMEN OUTPUT1,360 LUMENS WITH CA LENS AND 5000K APPROX. LUMEN OUTPUT

2,040 LUMENS WITH CA LENS AND 5000K

AMBIENT TEMPERATURE 0°C TO 55°C AMBIENT TEMPERATURE 0°C TO 55°C

ILLUMINATION TIME 90 MINUTES ILLUMINATION TIME 90 MINUTES

OPTION DATACONTACT FACTORY FOR DETAILED SPECIFICATIONS OF EACH OPTION. CONTACT FACTORY FOR USE IN 347/480V APPLICATIONS.

EMERGENCY BATTERY 10-WATT

DAYLIGHT HARVESTING & OCCUPANCY SENSOR OCCUPANCY SENSOR - ON/OFF

EMERGENCY BATTERY 15-WATT

WIRELESS CONTROL MODULECONTACT FACTORY FOR WIRELESS CONTROL/SENSOR OPTIONS

LUX-IK10P-L-2-SA-HO3-850-2-U10-CA2

POLAR CANDELA GRAPH

LCS GRAPH

MAXIMUM CANDELA = 7623LOCATED AT:HORIZONTAL ANGLE = 0,VERTICAL ANGLE = 0

#1: VERTICAL PLANETHROUGH HORIZONTALANGLES (0 - 180)(THROUGH MAX. CD.)

#2: VERTICAL PLANETHROUGH HORIZONTALANGLES (90 - 270)

#3: HORIZONTAL CONETHROUGH VERTICAL ANGLE(0) (THROUGH MAX. CD.)

FRONT:LOW=2946.8MEDIUM=5310.4HIGH=2203.7VERY HIGH=314.3

BACK:LOW=2946.8MEDIUM=5310.4HIGH=2203.7VERY HIGH=314.3

UPLIGHT:LOW=238.4HIGH=843.4

BUG RATING:B4-U4-G3

LEGEND:

PHOTOMETRIC DATA

MOUNTING DETAILS

HXX-18Y OR HXX-18Y T (AC CABLE 2-POINT)-“XX” DENOTES LENGTH IN FEET. AVAILABLE IN 10’, 20’, 30’-“T” AT END OF PART NUMBER

DENOTES TOGGLE INSTEAD OF HOOK

MH1P (MYERS HUB 1 POINT) -(1) 3/4” IP THREADED HUB PROVIDED

-OTHER HUB DIAMETERS ARE AVAILABLE, CONTACT FACTORY

-MACHINED MOUNTING POINT IN FIXTURE CENTER PROVIDED

-STEM/THREADED ROD NOT PROVIDED

-NOT AVAILABLE ON ALL MODELS AND OPTIONS,CONTACT FACTORY FOR DETAILS.

SPM (SINGLE POINT MOUNT)-3/4” IP THREADED HUB, SUSPENDED JUNCTION BOX

-FIXED LENGTH (3’ OR 5’) AIRCRAFT CABLE HANGERS

PROVIDED WITH HOOK ENDS.-POWER CORD ORDERED SEPARATELY

UH2 (UNISTRUT HARDWARE, 2 POINT)-UNISTRUT HARDWARE INCLUDES SPRING-NUT AND BOLT

-2 SETS WILL BE PROVIDED

UH4 (UNISTRUT HARDWARE, 4 POINT)-UNISTRUT HARDWARE INCLUDES SPRING-NUT AND BOLT

-4 SETS WILL BE PROVIDED

SM (SURFACE MOUNT)-NO ADDITIONAL HANGING HARDWARE PROVIDED

-FIXTURE MAY BE ANCHORED TO ANY SUITABLE SUBSTRATE

THROUGH ELECTRONICS CHANNEL

H4PXX (AC CABLE 4-POINT)-“XX” DENOTES LENGTH IN FEET. AVAILABLE IN 10’, 20’, 30’-“SS” AT END OF PART NUMBER DENOTES NATATORIUM GRADE 316 STAINLESS STEEL.

RECOMENDED FOR NATATORIUM APPLICATIONS

MH2P (MYERS HUB 2 POINT)-(2) 3/4” IP THREADED HUBS PROVIDED

-OTHER HUB DIAMETERS ARE AVAILABLE, CONTACT FACTORY

-MACHINED MOUNTING POINTS IN FIXTURE CHANNEL(S)PROVIDED

-STEMS/THREADED RODS NOT PROVIDED

-NOT AVAILABLE ON ALL MODELS AND OPTIONS,CONTACT FACTORY FOR DETAILS.

CABLE MOUNTS:

PENDANT MOUNT:

MYER’S HUB PENDANT MOUNTS:

SURFACE MOUNTS:

UNISTRUT NOT PROVIDED

SPRING NUT

WASHER

BOLT

UNISTRUT NOT PROVIDED

SPRING NUT

WASHER

BOLT

LUX dynamics 1350 Capital Blvd, Reno, NV 89502 Phone: 775.200.0707 Fax: 775.313.0888 Revised 4.14.20 www.luxdynamics.com