NIS - BIOLOGY Lecture 65 – Lecture 66 Evidence of Evolution Ozgur Unal 1.
Ozgur Bedenler Arac Donanimlari
-
Upload
kamekaze61 -
Category
Documents
-
view
124 -
download
5
Transcript of Ozgur Bedenler Arac Donanimlari
product catalogue 2009
English
Autoadapt
Autoadapt is ISO 9001:2000 certified for quality management systems. It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.
Autoadapt’s history began in 1990, when the adaptation company Beram AB was established. In 1996 the company came under new ownership and changed its name to Autoadapt AB.The Autoadapt head office, development and production plant is in Stenkullen, in the south western part of Sweden. The company has a subsidiary in Birmingham, Autoadapt UK Ltd., for the UK market.
Today Autoadapt is represented in 45 countries worldwide, with a network of more than 230 Autoadapt dealers.
Autoadapt is proud to be a part of the mobility programmes at Fiat and Toyota.
Autoadapt is a leading global provider of vehicle adaptation solutions for people with reduced or limited mobility.
Our products are used by thousands of satisfied customers worldwide.Our long experience of vehicle adaptation has resulted in several in-novations, such as the popular Carony vehicle wheelchair system and the Turny seat lift, making the disabled and elderly more independent.
inspection and tests, ensuring documented peace of mind for all.
Autoadapt is ISO 9001:2000 certified for quality management systems. It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.inspection and tests, ensuring documented peace of mind for all.It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.
Autoadapt is ISO 9001:2000 certified for quality management systems. It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.
Autoadapt is ISO 9001:2000 certified for quality management systems. Autoadapt is ISO 9001:2000 certified for quality management systems. It embraces design, development, production and installation, final It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.It embraces design, development, production and installation, final It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.It embraces design, development, production and installation, final inspection and tests, ensuring documented peace of mind for all.
2
Safety tested products
Autoadapt’s guiding rule is to offer safety tested products of high quality that comply with current regulations and directives.
In the Swedish tradition of safety Autoadapt is working actively within Europe to enhance the safety level of car adaptation products. We regard it as our mission to offer the disabled drivers and passen-gers the same safety conditions as other road-users.
As a guidance, you will in this catalogue find symbols representing the different tests that the products have passed. The pull tests made on the products are not stated by a symbol, as these tests are included in the crash test standards.
Peter WahlstenVice President
Explanation to the symbols used in this catalogue:
CE-marked
Crash tested
EMC tested(Electro magnetic compatability)
10 000 cycle test
Flammability
The pull test rig at Autoadapt. Autoadapt products crash tested at SP (the Technical Research Institute of Sweden).
3
(CSC) Customer Support Centre
Please feel free to contact our Customer Support Centre! We will assist you when placing your orders, provide technical support and guide you to the best product solutions to meet your requirements. The CSC will also assist if you have any complaints and claims for returned goods. For returned goods it is absolutely necessary to always contact the CSC department before sending any goods back to us.
CSC Customer Support CentreOpening hours:Monday to Friday 08.00 - 16.30
phone: +46 302 25440fax: +46 302 [email protected]
Peter MeinerSales/Support
Günther LoosSales/Support
Marcin DabrowskiSales/Support
4
5
DealerWeb
Autoadapt’s DealerWeb delivers up-to-date information around the clock
In addition to the Product Catalogue, we are pleased to offer our online serv-ice DealerWeb, which gives you instant access to the latest products, market-ing material, manuals, installation guides and much more.
One useful feature is the selection of a vehicle specific mounting bracket for a product. Finding the correct mounting bracket is only a few clicks away!
Using DealerWeb is easy. All you need is an Internet connected computer and your login details. Once logged in, you have access to all available product information as well as the latest news and updates.
In our commitment to giving you the very best service and support, we are convinced that you will see the benefits and come to appreciate how using DealerWeb can save your business valuable time.
If you haven’t received your DealerWeb log in or need to add log in access for your sub dealers, please contact: [email protected]
6
Carony.................................................Carony options.....................................Carony Go ..........................................Carony Go options...............................Carony Drive........................................Carony Drive options............................Seats....................................................Seat options..........................................Turny....................................................Turny options........................................Turnout.................................................Turnout options......................................Turnin...................................................Driver Test Station..................................Driving aids..........................................Driving aid options................................Wheelchair stowing solutions.................Belts.....................................................Wheelchair securements........................Various aids.........................................
810141518192022252628293132344041495254
Contents
7
8
Carony
Carony 12”
Carony 12”
right sideright sideleft sideleft side
BEV seatRecaro LBEV seatRecaro L
Complete with wheel unit, seat with headrest, armrests and push handle, footrests, carriage and Carony 475 mm rails (inside the vehicle)
installation seat article no.
100399100683100402100684
Carony carriage(mounted under the seat)
Wheel unit
The complete Carony
Seat with armrests and neckrest
Carony rails mounted in the vehicle(available in 3 different lengths, see page 10)
Push handlePush handle
Wheel unit
9
Carony
Carony 24”
Carony 24” right sideright sideleft sideleft side
BEV seatRecaro LBEV seatRecaro L
Complete with wheel unit, seat with headrest, armrests and push handle, footrests, anti-tip device Swan, carriage and Carony 475 and 550 mm rails (inside the vehicle)
installation seat article no.
100872100905100889100906
Carony Fixed (only in combination with Turny)
Carony Fixed
right sideright sideleft sideleft side
BEV seatBEV Kids seatBEV seatBEV Kids seat
This Carony version can NOT be height adjusted. A set of spacers for 3 different fixed heights is included.Complete with wheel unit, seat with headrest, armrests and push handle, footrests, anti-tip device, carriage and Carony rails 475mm (inside the car). From now on in colour Ruby red.
installation seat article no.
101232101245101233101246
Carony Kids
Carony Kids 12”
Carony Kids 24”
right sideleft side
right sideleft side
BEV Kids seatBEV Kids seat
BEV Kids seatBEV Kids seat
This Carony version has an extra short seat (40 cm) to fit a child or a short person. The seat length is extendable with an extra 5 cm.Complete with wheel unit, seat with headrest, armrests, head sup-port, body supports, push handle, footrests, extendable foot rack and Carony 475 mm rails
installation seat article no.
101243101244
101423101422
10
Carony options
Carony rail options
475 mm
550 mm
600 mm
101868
101867
101866
length article no. purpose
When ordering Carony 12” the 475 mm rails are included.When ordering Carony 24” the 475 and the 550 mm rails are included.
For all Carony models when com-bined with Turny.Also for Carony 12” with Turnout.
For Carony 24” combined with Turnout.
For Carony 24” combined with Turn-out in a vehicle with deep thresholds.NOTE! Ordered separately.
Rails (inside the vehicle):600, 550 and 475 mm
The 600 mm rails are ordered separately
Carony seat options
The manual Carony models (12”,24”) have the option of being combined with either the BEV seat or the Recaro Specialist L. If ordered separately, please refer to page 20: Seats.
The BEV seat and the Recaro Specialist L seat.
article no.
101855
Push handle
Carony push handle prepared for the BEV seat and the Recaro seat.
Mounting piece for the Recaro seat
Carony push handle with spacers for the
BEV seat
Carony push handle
11
Carony options
article no.
100424100426
Adjustable angle legrest, rightAdjustable angle legrest, left
Adjustable angle legrest
Adjustableangle legrest
Child legrest
article no.
100630Foot support /heel belt (one piece)
Foot support/heel belt
article no.
100754Child legrest (in pairs)
Child legrest
For people with long legs or for people with problems bending the knees.
Child legrest
foot support
article no.
100440Calf/leg support
Calf/ leg supportCalf/leg support
12
Carony options
article no.
article no.
100680
412227
Foot rack, mounted under the seat
Carony carriage
Foot rack
Carony carriage
The foot rack is extendable and used for keeping the feet up when swivelling with the seat. It is easily mounted in the Carony car-riage. Included as standard with the Carony Kids.
The carriage is included when ordering a Carony, but can also be ordered separately.
Foot rack
article no.
100438100697101278
Rear wheels 12”, puncture freeFront wheels 8x2”, puncture freeFront wheels (thin) 7x1”, puncture free
Puncture free wheelsBear in mind that puncture free wheels add weight to the Carony wheel unit and make it heavier to lift.
7x1 (Carony 24” front wheel)
Front wheel 8x2 and rear wheel 12”
article no.
100700Level raising kit
Level raising kit, 50 mm
article no.
100853Anti-tip device
Anti-tip device “Swan”
For Carony 12” and 24” (in pairs). Included as standard with the Carony 24”.
For raising the level of the Carony rails on the wheel unit.Only for Carony 12”, 24” and Kids.
Anti-tip device
Level raising kit
Carony carriage(mounted under the seat)
13
Carony options
article no.
101166Carony Transport Fittings (in pairs)
Transport fittingsThe transport fittings are mounted under the seat of the Carony and are used for fixing the securement if the wheelchair is trans-ported in a vehicle without the Carony system.
article no.
101518Carony docking device
Carony docking device
(towards the front)
Carony docking device
Used when lifting a Carony or a Carony Go wheel unit with a Carolift hoist.
Carony docking device
installation article no.
101837101838101839
TildaTildaTilda footrest
TildaTilda enables the seat to be tilted 15º backwards, in three steps. This product improves the head space when sliding the seat between the Carony wheel unit and the Turnout swivel inside the vehicle. If the optional footrest is used, Tilda will also provide an excellent help to get the feet easily over the threshold when swivel-ling inside the vehicle.Height under the seat: 24 mm.
on the right sideon the left side
The optional Tilda footrest
14
Carony Go
Carony Go
Carony Go Carony Go
Complete including wheel unit with footrests and anti-tip device, seat with headrest and armrests, 475 mm Carony rails, batteries and a charger.
joystick article no.
101527101528
right sideleft side
The Carony Go - our power wheelchair in the Carony family - can only be retailed by selected Carony Go dealers. The reason for this is that the product requires special knowledge and experience in wheelchairs and a service readiness that meets the needs of power wheelchair occupants.
The option of having the joystick on the left or on the right hand side is purely for the benefit of suiting left-handed or right-handed wheelchair occupants. The two joystick versions can be installed on either side in the vehicle.
15
Carony Go options
article no.
101525Carony Go Dynamic programming unit
Carony Go/Drive Dynamic programming unit
article no.
101542Carony Go attendance drive
Carony Go attendance drive
article no.
101519Carony Go push handle
Carony Go push handleFor manual operation of Carony Go.
Must be used in combination with push handle. Note! Push handle is not included
Carony Go Dynamicprogram-ming unit
Carony Go push handle
article no.
101517Carony Go lighting-kit
Carony Go/Drive lighting-kitLight options include front, rear and side lights. This option can only be ordered together with a Carony Go order and is NOT available for After-sale
16
article no.
101520Carony Go batteries, 2 pcs.
Carony Go/Drive batteries
article no.
101521Carony Go battery charger
Carony Go/Drive battery charger
Carony Go options
Mastervolt mod IVO 24/6 IP 65
Two 12 V batteries, 45 Ah.When replacing batteries always replace both at the same time!
Battery charger
Batteries, always in pairsBatteries, always in pairs
article no.
101575101576
Carony Go Adjustable angle legrest right sideCarony Go Adjustable angle legrest left side
Carony Go adjustable angle legrest
Carony Go Adjustableangle legrest
For people with long legs or for people with problems bending the knees.
article no.
100440Calf/leg support
Calf/ leg supportCalf/leg support
17
article no.
101518Carony docking device
Carony docking device
Carony docking device
Used when lifting a Carony or a Carony Go wheel unit with a Carolift hoist.
Carony Go options
installation article no.
101837101838101839
TildaTildaTilda footrest
TildaTilda enables the seat to be tilted 15º backwards, in three steps. This product improves the head space when sliding the seat between the Carony wheel unit and the Turnout swivel inside the vehicle. If the optional footrest is used, Tilda will also provide an excellent help to get the feet easily over the threshold when swivel-ling inside the vehicle.Height under the seat: 24 mm.
on the right sideon the left side
The optional Tilda footrest
article no.
101840DriveLOC
DriveLOCWheelchair securement, specially designed for Carony Drive or Carony Go. The docking plate for Carony Go must be ordered separately.
article no.
101841DriveLOC docking plate for Carony Go
DriveLOC docking plate for Carony Go Docking plate to be fixed under the wheelchair in order to adapt it for DriveLOC.
DriveLOC Dock-ing plate for Carony Go
Emergency release
18
Carony Drive
Carony Drive
Carony Drive Carony Drive
Complete including batteries, charger and a docking plate for the DriveLOC.
joystick article no.
101851101852
right sideleft side
The Carony Drive has the same performance as the Carony Go and uses a control system from Dynamic. It is a power wheelchair, specially designed to be used when driv-ing a vehicle from the wheelchair. The adjustable seat height is, at lowest position, only 38 cm and up to 52 cm at the highest.
The footrest moves forwards as the seat is lowered, to provide better seat-comfort and to lower the knees away from the steering wheel. The arm holding the wheelchair control can be lowered and the control can be flipped down and out of the way when seated at the steering wheel.
The Carony Drive can NOT be combined with Turnout or Turny.
52 cm
38 cm
The footrest moves forward as the seat is lowered
19
Carony Drive options
article no.
101520Carony Go batteries, 2 pcs.
Carony Go/Drive batteries
article no.
101521Carony Go battery charger
Carony Go/Drive battery chargerMastervolt mod IVO 24/6 IP 65
The Autoadapt XL-Belt is a 3-point belt that is crash tested and clas-sified according to E17.
Two 12 V batteries, 45 Ah.When replacing batteries always replace both at the same time!
Battery charger
Batteries, always in pairs
article no.
101840Drive LOC
Drive LOCWheelchair securement, specially designed for Carony Drive.Please also refer to DriveLoc in the chapter “Wheelchair secure-ments”.
article no.
article no.
101525
100162102122102123102124
Carony Go/Drive Dynamic programming unit
Autoadapt XL BeltFemale buckle, long holderFemale buckle, flexible, short holderFemale buckle, short holder
Carony Go/Drive programming unit
Autoadapt XL-Belt e17
Dynamicprogramming unit
Emergency release
NEW
20
BEV seat
Seat length: 400-450 mm. Seat width: 440 mm
Seat length: 470 - 530 mm (adjustable). Seat width: 440 mm
Seats
BEV Kids seat
Recaro Specialist L
BEV seat
RecaroSpecialist L
Seat length: 485-530 mm. seat width: 510 mm.
BEV Kids seat
Please note that the BEV Kids seat, if ordered separately, should be combined with the Child Leg Supports when used with Carony.
Headrest, neck support, body support and armrests are included.The BEV Kids seat for Carony (*) also include the carriage and the Carony foot rack.
article no.
100619101247
BEV Kids seat for Carony *BEV Kids seat for Turnout/Turny
*The Carony carriage is included with the BEV Kids seat for Carony.
article no.
100693100701
Recaro Specialist L Recaro Specialist L including armrests
article no.
100420100622
BEV seatBEV seat including armrests
*Foot rack, included in the BEV Kids seat for Carony.
Ergonomic seat, specially designed for easy individual adaptation using a variety of BEV options. Now upholstered in a new solid grey fabric.
21
Seats
Bruno L P seatSeat length: 490 mm. Seat width: 490 mm
position in vehicle article no.
101869101871
101870101872
101875
Bruno L P seat, greyArm rests (pair) grey
Bruno L P seat, beigeArm rests (pair), beige
Adapter kit for installing the Bruno LP seat (TAS-K-25 12) on a Turny
LP seat grey
LP seat beige
Right side
Right side
Adapty seat
Seat length: 500 mm. Seat width: 500 mm (width incl operation panel: 560 mm)
position in vehicle article no.
101861101862
101860101863
Adapty seat, 12 adjustmentsAdapty seat, 12 adjustments
Adapty seat, 8 adjustmentsAdapty seat, 8 adjustments
left sideright side
left sideright side
The Adapty Seat is upholstered in a dark grey fabric and equipped with heating in the seat and in the lower part of the backrest.Adapty Seat 12 has adjustments for sliding back and forth, tilt backwards and tilt forwards, seat height adjustment and individual adjustment of thigh supports (a split front edge of the seat).The seat also has a pneumatic lumbar support.
The Adapty Seat 8 has all the adjustments, except for the thigh support.
Adapty Seat 12
Adapty Seat 8
Comfortable seat for Turny and Turnout. Note: Not for the Carony!
22
Seat options
right left article no.
100848100428100429
101879101880
Armrest for BEV seatArmrest for BEV seatArmrest for BEV seat
Armrest for Recaro LArmrest for Recaro L
Armrests
XX
X
X
X
X
article no.
100505Slide rails for BEV seat and Recaro L
Slide railsThe seat slide rails are mounted on the Turnout for lengthwise adjustment of the seat.
Head rests
Carony Kids headrest
Comfort headrest
colour article no.
100458101153
101365
Comfort headrest for BEV seatComfort headrest for Recaro L
Carony Kids headrest
GreyBlack
Grey
Comfort headrest
Carony Kids headrest
Slide rails
article no.
101864Caroslide
CaroslidePowered seat slider. Provides lengthwise adjustment with a travel of 240 mm. Caroslide is prepared for the BEV seat and the Recaro seat. The height is 41 mm. Delivered complete with wire harness and toggle switch.
23
Seat options
Lumbar support
article no.
100432Lumbar support, rubber bladder
Side support
article no.
100430Side support
Head support (neck roll)
article no.
100665Head support
BEV seat cushions
article no.
101878101450
Backrest cushionSeat cushion
Backrest cushion
Seat cushion
Gives sidewise support for the head.
The lumbar support is placed under the backrest cushion or under the seat cushion for support. It is fixed by a Velcro fastening.
The side support is placed behind the backrest cushion or behind the seat cushion for support. Side
support
Lumbarsupport
Headsupport
24
Seat options
Foldable backrest (adaptation kit)
article no.
100699Foldable backrest, BEV seat
BEV Pressure Relief Seat Cushion
article no.
101649101650
BEV Pressure Relief Seat Cushion, MediumBEV Pressure Relief Seat Cushion, Hard
This seat cushion divides the weight better on the seat and relieves from pressure when seated for a longer period.Hardness: Medium for a person weighing less than 75 kg. Hard for a person weighing more than 75 kg.
Foldable backrest
If the BEV seat is installed in a 2-door vehicle the backrest must be easy to fold towards the front and allow access to the backseat.
25
Turny
Model vertical stroke installation article no.
101442101443101444101445
right sideleft sideright sideleft side
Turny HD
Turny HD
101522101523
101383101385
Contour cover kit
Turny cover kit Contour
The swivelling movement of Turny HD is manually operated. The Down/Up movement is powered and operated by a hand-held control. User weight 150 kg.
300 mm300 mm395 mm395 mm
Model vertical stroke installation article no.
101446101447101448101449
right sideleft sideright sideleft side
Turny Orbit
Turny Orbit
All movements of Turny Orbit are powered and operated by a hand-held control. User weight 150 kg.
300 mm300 mm395 mm395 mm
Turny cover kit Contour: Grey
Turny cover kit Contour: Beige
Model vertical stroke colour article no.
300 mm395 mm
300 mm395 mm
GreyGrey
BeigeBeige
The Turny HD and Orbit are delivered with-out covers and without a mounting bracket.These items must be ordered separately.
Turny cover kit Contour: GreyContour: Grey
Turny cover kit Contour: Beige
The Turny HD/Orbit are delivered without covers. The covers are ordered separately.
26
Turny options
101463101464
101465101466
Turny cover kit Flat model
Turny cover kit, flat model
Model vertical stroke install. article no.
300 mm300 mm
395 mm395 mm
right sideleft side
right sideleft side
In some vehicles where the space for a Turny installation is small it might be necessary to use the flat covers. Dark grey.
Autoadapt supplies vehicle specific mounting brackets for Turny HD/Orbit. The brackets are coated and delivered with hardware, air bag resistance and installation instructions.
For information on what vehicles we have available please consult the Autoadapt DealerWeb to see the latest updates, or contact our CSC department.
The vehicle specific mounting brackets are delivered with hardware and installation instructions.
Vehicle specific mounting brackets(Sample)
101877102095
Turny measurement tool, rightTurny measurement tool, left
Turny measurement tool
article no.
A tool for measuring where the Turny shall be fitted inside the vehicle.
101836Turny Universal Mounting Bracket
Turny Universal Mounting Bracket
article no.
For vehicles where there is not yet a specific bracket available. The bracket is coated and delivered with “legs”, hardware and pre-drilled bolt holes. Ask our Support department for extra air-bag resistance.
27
Turny options
101292Turny footrest
Footrest
article no.
The footrest is foldable. It is mounted between the Turny and the seat rails.
101227100728
Seat spacers 35 mmSeat spacers 70 mm
Turny seat spacers
article no.
These spacers are placed between Turny and the seat if the seat height needs to be raised.
Turny footrest
70 mm
35 mm
101843Turny/Turnout Wireless Remote Control
Turny/Turnout Wireless Remote Control
article no.
A key-ring size transmitter and a receiver, plug and play for Turny and Turnout. Frequency: 869.85 MHz.
28
Turnout
100412100413100414100415
Turnout 2Turnout 2Turnout 4Turnout 4
Turnout
vehicle type installation article no.
Manually operated swivel base.
Turnout E
Powered swivel base.
2 (3) - door vehicle2 (3) - door vehicle4 (5) - door vehicle4 (5) - door vehicle
right sideleft sideright sideleft side
100714100715100716100717
Turnout 2ETurnout 2ETurnout 4ETurnout 4E
2 (3) - door vehicle2 (3) - door vehicle4 (5) - door vehicle4 (5) - door vehicle
right sideleft sideright sideleft side
vehicle type installation article no.
Vehicle specific mounting brackets
Please consult the Autoadapt DealerWeb for updated information on what vehicle specific brackets we have available.The mounting brackets are coated in a dark grey colour.Hardware and air bag resistance are included as well as mounting instructions and Manufacturer Certificate.
29
Turnout options
101844Universal mounting bracket
Universal mounting bracket
article no.
Coated mounting bracket for further adaptation. Nuts and bolts included for assembly. Delivered with Manufacturer Certificate and Installation instructions. Ask our Support department for extra air-bag resistance.
101876Standard mounting bracket for Turnout
Standard mounting bracket
article no.
The Standard mounting bracket is an uncoated work piece for further adaptation.
101685Open slewing bracket
Open slewing bracket
article no.
By using the Open slewing bracket, the upper swivel plate turns slightly outwards before the actual swivel movement forward and outwards. This provides extra space by the steering wheel in a driver seat installation, or extra space when glove compartment is in the way. (Included in Turnout 4E)
Open slewing bracket
article no.
100505Slide rails for BEV seat and Recaro L
Slide railsThe seat slide rails are mounted on the Turnout for lengthwise adjustment of the seat.
Slide rails
101843Turny/Turnout Wireless Remote Control
Turny/Turnout Wireless Remote Control
article no.
A key-ring size transmitter and a receiver, plug and play for Turny and Turnout. Frequency: 869.85 MHz.
30
Turnout options
installation article no.
101837101838101839
TildaTildaTilda footrest
TildaTilda enables the seat to be tilted 15º backwards, in three steps. This product improves the sitting-comfort and the head space inside the vehicle. If the optional footrest is used, Tilda will also provide an excellent help to get the feet easily over the threshold when swivelling inside the vehicle.Height under the seat: 24 mm. To avoid a conflict between the release levers it is recommended to use a Tilda, left side version, with a Turnout manual, right side version, and vice versa.
on the right sideon the left side
The optional Tilda footrest
article no.
101864Caroslide
CaroslidePowered seat slider. Provides lengthwise adjustment with a travel of 240 mm. Caroslide is prepared for the BEV seat and the Recaro seat. The height is 41 mm.For left and right side use.
31
Turnin
101019101020
TurninTurnin
Turnin seat swivel
installation article no.
Turnin swivels the seat inwards and makes transfer between wheel-chair and car seat inside the vehicle possible. Turnin is powered and operated via a hand-held control. Maximum 95° swivel.
right sideleft side
101844Universal mounting bracket
Universal mounting bracket
article no.
Coated mounting bracket for further adaptation. Nuts and bolts included for assembly. Delivered with Manufacturer Certificate and Installation instructions. Ask CSC department for extra air-bag resistance.
101876Standard mounting bracket for Turnout
Standard mounting bracket
article no.
The Standard mounting bracket is an uncoated work piece for further adaptation.
NOTE! This product is NOT CE-marked!
32
Driver Test Station
Our new Autoadapt Driver Test Station is an evaluator tool, used to determine a customer’s strength, mobility and reaction time. The Test Station does not produce a pass/failed result but provides the evaluator with true facts in making these decisions. The DTS allows you to test and compare the clients strength and reaction in using a right and left hand control, right and left foot pedals, turning the steering wheel with different steering knobs to find what combination fits your client best. The DTS is extremely flexible and allows the test person to perform the test either by transferring to the swivel seat or from the clients wheelchair. No additional power except for a laptop is needed.The Drive Test Station consists of:A cockpit on wheels with removable swivel seat unit, left and right hand controls, pedals with quick release left foot accelerator, a torque adjustable steering wheel with six different kind of steering wheel knobs. Load Sensor, Electronics, PC Software and calibrator.
Note: Laptop not included!
article no.
102055102083
Driver Test Station RHDDriver Test Station LHD
DTS Driver Test Station
Note: Laptop not included!
Driver Test Station RHDDriver Test Station LHD
NEW
33
Driver Test Station
For walking or trans-ferring individuals:
DTS with the seat floor unit mounted.The seat has a swivel feature for easy entry.
The DTS software show-ing the start page with the different test items:Right hand strength, left hand strength, right foot strength, left foot strength and also the ability to react.
For wheelchair occupants:
DTS with the wheels and the seat floor unit removed. The wheelchair can be secured to the wheelchair an-chorage at the front.
34
Driving aids
100271100368100841100842
Carospeed Classic Carospeed ClassicCarospeed ClassicCarospeed Classic
Carospeed Classic
knob type of vehicle article no.
The Carospeed Classic hand control for accelerator and brake is equipped with Hill-holder and set function for cruise control.
LHDLHDRHDRHD
blackwood/blackblackwood/black
Carospeed Classic
100730100729100840100839
Carospeed Classic E Carospeed Classic ECarospeed Classic ECarospeed Classic E
Carospeed Classic E
knob type of vehicle article no.
The Carospeed Classic E hand control for accelerator and brake is equipped with Hill-holder, set function for cruise control and a multiple selector for the primary electrical functions.
LHDLHDRHDRHD
blackwood/blackblackwood/black
Carospeed Classic E
35
Driving aids
100990100992
Carospeed Classic T Carospeed Classic T
Carospeed Classic T
T-grip handle type of vehicle article no.
The Carospeed Classic T is delivered with a choice of two different T-grip handles. The hand control is equipped with Hill-holder and set function for cruise control.
LHDRHD
2 models2 models
100991100993
Carospeed Classic TE Carospeed Classic TE
Carospeed TE
T-grip handle type of vehicle article no.
The Carospeed Classic TE is delivered with a choice of two differ-ent T-grip handles. The hand control is equipped with Hill-holder, set function for cruise control and a multiple selector for the pri-mary electrical functions.
LHDRHD
2 models2 models
101280101283
Carospeed Classic Indicator Carospeed Classic Indicator
Carospeed Classic Indicator
knob type of vehicle article no.
The Carospeed Classic Indicator is equipped with Hill-holder, set function for cruise control and a toggle switch for the turn right and the turn left indicators.
LHDRHD
blackblack
Carospeed Classic T
Carospeed Classic TE
Carospeed Classic Indicator
36
Driving aids
102013102014
102064102065
102057
102024
Carospeed Menox Standard Carospeed Menox Standard*
Carospeed Menox Stripped Carospeed Menox Stripped*
8-way Multi Function Relay box
Carospeed Menox Gas Holder
Carospeed Menox Standard
Carospeed Menox Stripped
Carospeed Menox Multi Function
Carospeed Menox Gas Holder
type of vehicle article no.
type of vehicle article no.
article no.
article no.
A floor mounted hand control for accelerator and brake with a switch for the Hill-holder and the set function for cruise control, as well as for activating the horn.The hand control is delivered with a grey handle and the slim designed plastic hard cover in black. Please add a wire pack for standing pedals.
The stripped version of the hand control has the same features as the Menox Standard, but is delivered without the top of the han-dle and without the cover for the lever. Choose your own design among the wide range of optional tops and covers.Please add a wire pack for standing pedals.
Add an 8-way Multifunction Relay box for the primary electrical functions. The box also provides ability to add interval, speed, au-tomatic stop and hazard to the electrical functions. The kit includes a set of switches and a wire harness.
Option for vehicles without cruise control. The Menox Gas Holder keeps the gas in place mechanically (by magnets). Does not inter-fere with the ability to brake.
LHDRHD
LHDRHD
Carospeed Menox Standard
Carospeed Menox Stripped
Carospeed Menox Standard
Carospeed Menox Stripped
The Multifunction switches installed inside the handle.
Features:Indicators, headlights, wipers and washer
* For right side in the vehicle (U.K.), operated with left hand. Menox wire pack for installation is also included.
* For right side in the vehicle (U.K.), operated with left hand. Menox wire pack for installation is also included.
NEW
NEW
NEW
37
Driving aids
102066
102019
102018
102017
102016
102020102021102022102023
102067
102026
Grey
Black
Steel
Carbon
Wood
BlackLight greyGreyBeige
Black hard cover
Carospeed Menox wire pack
Carospeed Menox tops for the handle
Carospeed Menox wire pack
Carospeed Menox leather-look covers
Carospeed Menox hard cover
article no.
article no.
article no.
article no.
Choose a design that blends smartly into the vehicle interior.
For hand control installation with standing gas pedal.This article is only needed for some vehicles with LHD as it is included as standard in RHD hand controls.
The Leather look cover kit includes covers for the brake shaft, the lever, the handle attachment piece and the hill-holder housing at the base.
The slim designed cover is made of injection moulded black plastic. The kit also includes a stocking to protect the hill-holder mechanism.
Grey
Black
Beige
Hard cover
Grey
Light grey
Black
Steel
Carbon
Wood
38
Driving aids
Adapter
Ergo
Low
M--Sandard
102145
102028102029102030102031
102040102041102042102043
102032102033102034102035
102054
102036102037102038102039
102058102059
Adapter
WoodCarbonSteelBlack
WoodCarbonSteelBlack
WoodCarbonSteelBlack
Grey
2-pin3-pin
Adapter for steering device
Steering device, model Low
Steering device, model Round
Steering device, model Ergo
Steering device, model M-Standard
2- and 3- pin steering device
article no.
article no.
40 mm: art. no. 50 mm: article no.
article no.
article no.
article no.
Flat handle that can be used with the palm of the hand.
Oval shaped ergonomic design.
Uses the same handle as the Carospeed Menox hand control.
The 2- and 3-pin steering devices can easily be reshaped to fit the hand.
Round 40 mm
Round 50 mm
NEW
39
Driving aids
102047102048
102049102050
102044
102045
102046
Menox Ministamp, automatic gear box (2-pedals) Menox Ministamp, manual gear box (3 pedals)
Menox Stamp pedal, automatic gear box (2 pedals)Menox Stamp pedal, manual gear box (3 pedals)
Left Foot Accelerator pedal, flip-up model
Left Foot Accelerator pedal, quick release model
Pedal Guard
Ministamp pedal extension
Stamp pedal extension
Left Foot Accelerator, flip-up model
Left Foot Accelerator, quick release model
Pedal Guard
article no.
article no.
article no.
article no.
article no.
Pedal extension of 3 - 9 cm (1” - 3“). Provided with a hinge for lowering and folding up.
Pedal extension of 10 - 30 cm (4” - 10“) with foot platform. The unit has a quick release for easy removal.
The hinged left foot pedal transfers the force to the accelerator by a high quality Teflon coated wire. Hinge kit for original gas pedal is included.
The floor mounted unit has a pedal guard for the original accelera-tor pedal and a quick release for easy removal.
Pedal guard with quick release for easy removal.
NEW
NEW
NEW
NEW
NEW
40
Parking Brake Release
article no.
100533100762
Parking Brake Release, 35 mmParking Brake Release, 40 mm
The Parking Brake Release is available in two pipe dimensions: tube diameters 35 mm and 40 mm.The handle is made of soft black plastic foam.
NOTE! This product is NOT CE marked!
Carobrake IP66
article no.
101845Carobrake 700
Carobrake pulls the parking brake with a power of up to 170 kg via an actuator, mounted inside or under the vehicle. Carobrake pulls the original parking brake wire of the vehicle.Stroke maximum 50 mm. Wire length 700 mm.
40 mm tube... ...and 35 mm tube
pulls the original parking brake wire of the vehicle.Stroke maximum 50 mm. Wire length 700 mm.
Carospeed vehicle specific mounting brackets
The specific mounting brackets fit both the Carospeed Classic and the Carospeed Menox hand controls. Please consult the Autoadapt DealerWeb for updated information on what vehicle specific brackets we have available.The mounting brackets are coated in a dark grey and all hardware is included as well as mounting instructions.
100748Carospeed universal mounting bracket
Carospeed mounting bracket work piece
article no.
This mounting bracket work piece has to be adapted for each specific vehicle. Delivered uncoated. The mounting bracket fits both the Carospeed Classic and the Carospeed Menox hand controls
Art. No: 416 446
Autoadapt AB, Hedeforsvägen 6, 443 61 Stenkullen, Sweden PHONE: +46 (0)302 - 558 20 FAX: +46 (0)302 - 558 29 E-MAIL: [email protected] WEB: www.autoadapt.com
Art. No: 101194
Art. No: 101195
RHD
LHD
1
Volvo V70Volvo V70Vehicle year from 01
Art. No: 416 446
Carospeed mounting bracket for Volvo V70
Carospeed mounting bracket work piece
Driving aid options
41
Wheelchair stowing solutions
C-arm and T-bar For power chairs/scooters with seat. Max 180 kg.
Claw and T-bar For power chairs/scooters without the seat.Max 90 kg.
Claw and T-barFor folded manual wheelchairs placed hori-zontalMax 25 kg.
Clamping claw For folded manual wheelchairs placed vertical.Max 25 kg.
Carony docking device Specially designed for Carony wheel units.
101518
101150
101149
101148
101147
Pulley Can only be used with Carolift 90 or 140.101666 (90 kg) and 101667 (140 kg)
101666101667
The loop For manual wheelchairs. Lift capacity 25 Kg.
100621
Carolift docking devices
The Carolift docking devices are ordered separately. Choose a docking device suitable for the type of wheelchair that shall be used.
42
Wheelchair stowing solutions
Carolift 40
article no.
Lift capacity 40 kg.
The hoist arm is bendable both ways, thus placing the wheelchair in a centered position inside the vehicle. This feature enables the wheelchair to pass through narrow door openings, bypass wide bumpers or to be picked up from the pavement beside the vehicle.
Manual rotation and powered lifting/lowering, which is operated by a switch on top of the hoist.
The hoist is delivered with a universal mounting base. The docking device is ordered separately.
101663Carolift 40
4-point lift belt For all types of wheelchairs up to 180 kg.
2-point lift beltFor all types of wheelchairs up to 90 kg.
101152
101151
A = From cc pillar to lift belt, maximum...............B = From cc pillar to lift belt, minimum................C = From hoist arm bottom edge to vehicle floor..D = Total height, maximum................................ Total height, minimum..................................Length of lift belt...............................................
A
B
C 795 mm 530 mm 755 mm 875 mm 655 mm1380 mm
D
NEW:Now with gas spring, making it easier to fold down and lift up the hoist.
43
Wheelchair stowing solutions
101626Carolift ASL 325
Carolift ASL 325
article no.
Lift capacity 82 kg.
Carolift ASL 325 is a take-apart hoist, designed to fit in a sedan vehicle. The hoist is mainly intended for a power wheelchair or scooter with removed seat.Taken apart, there are two pieces that can be placed anywhere inside the vehicle. The heaviest weighs about 6 kg.Manual rotation and powered lifting/lowering which is operated by controls on top of the hoist.The hoist is delivered with a mounting base.The docking device is ordered separately.
The ASL-325 taken apart:
A= Total height over vehicle floor: 94.5 cm - 105 cm
B= From upper visual end of lift belt to vehicle floor: 81cm - 92cm
C= From lift belt to pillar: 62cm - 82cm
BC
A
44
100297Carolift 90
article no.
Lift capacity 90 kg. The hoist has powered functions for lifting/lowering and swivelling out and in.Suitable for station wagons, minivans or full-size vans.Height and length adjusted by cutting. The hoist is delivered with a universal mounting base. The docking device is ordered separately.
Carolift 90
Lift capacity 90 kg.
The hoist has powered functions for lifting/lowering and swivelling out and in.Suitable for station wagons, minivans or full-size vans.Height and length adjusted by cutting. The hoist is delivered with a universal mounting base. The docking device is ordered separately.
A= 108 cm including mounting base. Height adjusted by cutting.B= 87 cm. Length adjusted by cutting.C= Max 138 cm folded D= Max 59 cm
Wheelchair stowing solutions
101633Carolift VSL 900
Carolift VSL 900
article no.
Lift capacity 91 kg.
The hoist slides along the vehicle floor via rails and loads the wheelchair/scooter through the vehicle side entry. All movements are powered.The docking device is ordered separately.
A= Min: 103 cm, Max: 149 cmB= Min: 134.5 cm, Max: 152.4 cmC= Min: 84 cm, Max: 115 cm
Carolift 90
45
101018Carolift 140
Carolift 140
article no.
Lift capacity 140 kg. The hoist has powered functions for lifting/lowering and swivelling out and in. Suitable for station wagons, minivans or full-size vans.Height and length adjusted by cutting. The hoist is delivered with a universal mounting base. The docking device is ordered separately.
A= 105 cm including mounting base. The hoist is height adjusted by cutting (down to 74 cm).B= 82.5 cm. The length of hoist arm is adjusted by cutting.C= Max 134 cm foldedD= Max 62 cm
Wheelchair stowing solutions
101873101874101889
Carolift VSL 570, rightCarolift VSL 570, leftUniversal mounting baseSpecific mounting base
Carolift VSL 570
article no.
Lift capacity 181 kg.
The Carolift 570 has an off-set arm and differs from the Carolift 6000 by the manual rotation.The lifting/lowering is powered. For MPV vehicles and minivans.The docking device is ordered separately
*Drill an extra hole and cut.
ABC D
60cm - 83cm86cm (76*) - 104cm81cm - 99cm54cm
Lift belt at maximum A: 110cmLift belt at minimum A: 141cm
refer to DealerWeb
46
Wheelchair stowing solutions
101629101630101631101632
101889
Carolift 6000Carolift 6000Carolift 6900Carolift 6900
Universal mounting baseSpecific mounting base
Carolift 6000 and 6900
Installation article no.
Lift capacity 181 kg.
The off-set hoist arm allows the mobility device to be picked up from the side of the vehicle. This feature also enables installations in Estate wagons with sloping rear doors.The height is adjustable, and so is the angle and length of the hoist head. The rotation, lifting and lowering are powered. The rotation limit can be adjusted 360˚.Both hoists have a fold-down hoist head.The 6900 has a 20 cm retractable hoist head.
The docking device is ordered separately.Carolift 6000
Carolift 6900has a 20 cm retractable hoist head.(for narrow door open-ings or wide bumpers)
right sideleft side (UK)right sideleft side (UK)
*Drill an extra hole and cut.**Including 20 cm telescoping extension.
6000 6900
ABC D
60cm - 83cm86cm (76*) - 104cm81cm - 99cm54cm
63cm - 83cm**81cm (71*) - 98cm 71cm - 88cm53 cm
Lift belt at maximum A: 110cmLift belt at minimum A: 141cm
refer to DealerWeb
47
Wheelchair stowing solutions
101854
101488
101678
Joey Hardwire
Retractable belts
Universal mounting kit Joey
Joey Hardwire
article no.
Lift capacity 159 kg. Platform size 69 cm x 112 cm. The platform can also take 3-axis wheelchairs.
The Joey Hardwire is mounted in the third row seat pockets, when available, and in the centre fixing point by the threshold.
For information on the vehicle specific mounting kits available please consult the Autoadapt DealerWeb for the latest updates.
Included in the Joey Lift order are: securement belts (as shown in the Joey lift picture to the left), transport fittings to be mounted under the seat.
3 retractable belts and under seat docking bar.
Option: Retractable belts. Please note that these belts add a couple of cm between Joey and the rear door.
Overall Length: 115 cmOverall width: 112 cmOverall height: 97 cm
A 102 cm min.
B 112 cm min.
C 5 cm max.
D 69 cm max.
E 114 cm min.
F 33 cm max.
Floor ceiling and/or height of cargo opening for Joey tower only. Additional clearence may be required for scooter/ wheelchair.
Inside edge of door sill to middle seats.
Sill height.
Floor of van to ground.
Between wheel housings and/or width of cargo opening for the Joey platform only (if less, platform can be cut).
Inside edge of door sill to outside edge of bumper.
Unit weight: 75 kgPlatform Size: 69 cm x 112 cmMax. Lifting Capacity: 159 kg
48
Wheelchair stowing solutions
Roof Spider
article no.
101512Roof Spider
Roof Spider picks up the folded manual wheelchair from both sides of the vehicle. Roof Spider weighs 54 kg and has a low profile of 47 cm, measured from the roof rack.
230 cm127 cm 47 cm110 cm
120 cm 54 kg 25 kg12 V4.5 mA60 mA2 - 12 A10 A
A
B
C
D
A) From lifting device to lock box: 82,5 cmB) 114 cmC) 120 cmD) Height from x up to the lid: 35 cm
A
B
C
Length (A):.....................................Width:...........................................Height (B):......................................Height opened (C):.........................Maximum vertical travel from bottom of roof box (D)...............................Weight:...........................................Maximum load:...............................Voltage:.........................................Power consumption with lid closed:Power consumption with lid opened:Power consumption in operation:.....Fuse:........................Automatic fuse
D
49
Belts
Careva postural belts are very helpful for people who need extra support when seated in a vehicle seat or in a wheelchair.The belt system comprises a Spinal Belt which is fastened vertically over the backrest. The postural belt is then installed in the grooves of the Spinal Belt.Please check with our Customer Support Centre if you have special requirements.
Please note that the Careva system does not replace the vehicle safety belt!
The Careva postural belt system
article no.
101670101671101672
Small Combination Kit (3 - 7 years)Medium Combination Kit (7 - 14 years)Large Combination Kit (14 - adult)
Careva Combination KitThe Combination Kit is available in sizes Small, Medium and Large
The Combination Kit is available in sizes Small, Medium and Large
The Careva Combination Kit is a complete package, which con-sists of the Spinal Belt with five grooves in which a Pelvic T-belt, combined with a Shoulder Harness, is installed.
The Careva Spinal Belt
article no.
100955101374
Spinal Belt (5 grooves, 2 buckles)Spinal Belt (5 grooves, 2 buckles for S = 3-7 years)
The Spinal Belt is fastened vertically over the backrest and con-tains five grooves, in which the postural belts are mounted. The Spinal Belt is available in a wide or a narrow version (depending on body size).
50
Belts
4- and 6- point postural belts
2-point belt
article no.
article no.
100422100423
100425
4-point belt6-point belt
2-point belt
The webbing of the belts measures 40 mm
The 2-point belt is fastened in the seat of a wheelchair to serve as a postural belt. The belt is originally designed as a backseat belt and is B e4 certified.
Measure around the chest to determine the size of the Thoracic Belt100959 = 80 cm +/- 10 cm100958 = 100 cm +/- 10 cm ...and so on
The Careva Thoracic Belt
article no.
100959100958100957100590
Thoracic Belt 80 cm longThoracic Belt 100 cm longThoracic Belt 120 cm longThoracic Belt 135 cm long
The Careva Thoracic Belt is fitted in the upper groove of the Spinal Belt to support the upper body.
Measure around the chest to determine the size of the Thoracic Belt
The Careva Pelvic T-belt
article no.
100968100587100969
Pelvic T-belt, front fastening (S)Pelvic T-belt, front fastening (M)Pelvic T-belt, front fastening (L)
The Careva Pelvic T-belt is fitted in the Spinal Belt and prevents the lower body to slide forward in the seat.
padded part
20 cm30 cm40 cm
crotch of T-belt
50 cm65 cm80 cm
Pelvic T-belt with front fastening
NEW
51
Belts
Belt deflection
Seatbelt grip
CG-lock
article no.
article no.
article no.
100681
100786
102156
Belt deflection
Seatbelt grip
CG-lock
The belt deflection keeps the diagonal belt correctly positioned over the shoulder of a short person.
The seatbelt grip makes it easier to reach the seatbelt buckle by the B-pillar.
The CG-lock is fastened to the seatbelt buckle, for the purpose of locking the pelvic (horizontal) part of the seatbelt tightly to the hips. Suitable for drivers who need a more stable position in the seat.The CG-lock is originally design for racing drivers.
Belt deflection
Release handle
The CG-lock
The Autoadapt XL-Belt is a 3-point belt that is crash tested and clas-sified according to E17.
article no.
100162102122102123102124
Autoadapt XL BeltFemale buckle, long holderFemale buckle, flexible, short holderFemale buckle, short holder
Autoadapt XL-Belt e17NEW
NEW
NEW
52
Wheelchair securements
Carosafe II universal wheelchair lock
article no.
101846Carosafe II universal wheelchair lock
Carosafe II is powered and keeps the wheelchair steady, with a minimum of sway. It is very suitable for people who drive the vehi-cle while seated in a wheelchair. The Carosafe is designed to be easily adjusted for different types of power wheelchairs.Emergency release.
article no.
article no.
101840
101686102130
DriveLOC
UniLOCUniLOC Installation kit
DriveLOC
UniLOC
Wheelchair securement, specially designed for the Carony Drive (or the Carony Go). DriveLOC can also be used for some other power wheelchairs if the universal docking plate is used.Emergency release.
UniLOC is a universal wheelchair lock, delivered with wire har-ness, switch button and a light indicating locked and unlocked position.UniLOC is equipped with emergency release.The UniLOC has been tested with a 140 Kg power wheelchair in a 20G Dynamic test. It has also been tested according to ISO 10542-1. (UniLOC should be fastened in 4 anchor points with reinforcement washers under the vehicle floor)
article no.
101881
101841
DriveLOC/UniLOC Universal docking plate (for an unspecified power wheelchair)
DriveLOC docking plate for Carony Go
DriveLOC/UniLOC docking plates Docking plate to be fixed under the wheelchair in order to adapt it for DriveLOC. (Not needed for the Carony Drive)
DriveLOC Dock-ing plate for Carony Go
DriveLOC/UniLOC Universal Docking plate
Emergency release
Emergency release
NEW
53
Transport securement for wheelchairs
article no.
100004Transport securement
The transport securement is only designed for securing just the wheelchair and not for a wheelchair with occupant.The securement is electrically operated. As emergency back-up there is a metal wire to pull for unlocking it.
Wheelchair securements
54
Various aids
Pneumatic Hatch Opener
article no.
101683101684102060
Pneumatic Hatch OpenerHatch Lock OpenerSafety switch (to interact in combination with a ramp)
The Pneumatic Hatch Opener is operated by a switch, suitably placed close to the driver. The Universal Wireless Remote Control (see page 46) is available as option. The Hatch can still be manually opened. The Pneumatic Hatch Opener is delivered complete with a univer-sal bracket for fitting it into the vehicle. The cylinder stroke length is 600 mm. For vehicles without an electric hatch lock you can order the Hatch Lock Opener, which is integrated into the pneumatic system.
PneumaticHatch Opener
The Hatch Lock Opener as option
101865Universal Wireless Remote Control
Universal Wireless Remote Control
article no.
A key-ring size transmitter and a 2-way receiver, for products such as the Pneumatic Hatch Opener, the Joey, the vehicle door or other 2-way electrical products. Frequency: 869.85 MHz.
55
Autoadapt Customer Support CentreTel: +46 302 25440 Fax: +46 302 25407E-mail: [email protected]
Autoadapt ABÅkerivägen 7, S-443 61 Stenkullen SwedenTel: +46 302 254 00 Fax: +46 302 25407 E-mail: [email protected]
www.autoadapt.com www.autoadapt.dewww.autoadapt.fr www.autoadapt.sewww.autoadapt.co.uk
Art. No: 420069
Art.No: 420069, edition 3
Illustrations, descriptions and specifications in this catalogue are based on current product information. Autoadapt reserves the right for alterations without previous notice. © 2009 Autoadapt AB
Autoadapt´s Mission is to be a leading global provider of vehicle adaptation solutions for persons with reduced or limited mobility.