OZCO Project #210 IW - Wood Post & Beam Pavilion - Free ...€¦ · (OWT Timber Screw) provided...
Transcript of OZCO Project #210 IW - Wood Post & Beam Pavilion - Free ...€¦ · (OWT Timber Screw) provided...
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
OZCO Project #210 IW - Wood Post & Beam
Pavilion - Free Standing
1OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
9' 12 " 9'4 1
8 "
11'6 78 "
10'0"
11' 78 "
7'2 1316 "
11'0"
9'11 78 "
8' 1116 "
11'9 916 "
12'0"
Overview3OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
Translucent4OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/2/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/2/2017 . Please visit OZCOBP.com to get current information.
Bill of Material5OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
15
10
6
2
16
7
13
14
17
5 8111
12
3
9
ITEM NO. QTY. PART
NUMBER DESCRIPTION
1 4 51709 8x8 Post Base (8x8-PB-IW)
2 5 51718 4" Standard Rafter Clips (RC-IW-4)
3 2 51736 Post to Beam Bolt Offset (P2B-BO-IW)
4 5 56612 "T" Tie Plate (TTP)8 51711 Truss Accent (TA-IW)2 56625 OWT Timber Screw 1-
3/4"5 2 51736 Post to Beam Bolt Offset
(P2B-BO-IW)6 4 56619 Truss Base Fan 8:12
10 51711 Truss Accent (TA-IW)2 56625 OWT Timber Screw 1-
3/4"7 8 56651 OWT Timber Bolt 8-10"8 1 56622 1-1/4" Hammered Dome
Cap Nut9 28 1x6 Cedar
Board 1x6x11'0"
10 1 2x8 Cedar Board 2x8x12'0"
11 2 8x8 Cedar Post 8x8x8'0"
12 2 8x8 Cedar Post 8x8x8'0"
13 4 4x6 Cedar Board 4x6x3'0"
14 10 4x6 Cedar Board 4x6x7'0"
15 2 4x10 Cedar Board 4x10x12'0"
16 2 4x10 Cedar Board 4x10x9'4 1/4"
17 1 4x10 Cedar Board 4x10x8'4 1/2"
18 2 4x6 Cedar Board 4x6x3'1"
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/12/2018 . This information is updated periodically and should not be relied upon after 2 years from 3/12/2018 . Please visit OZCOBP.com to get current information.
Material List6OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
QTY. PART NUMBER DESCRIPTION
4 51709 8x8 Post Base (8x8-PB-IW)
2 51736 Post to Beam Bolt Offset (P2B-BO-IW)4 56612 "T" Tie Plate (TTP)
22 51711 Truss Accent (TA-IW)4 56625 OWT Timber Screw 1-3/4"5 51718 4" Standard Rafter Clip (RC-IW-4)2 51736 Post to Beam Bolt Offset (P2B-BO-IW)4 56619 Truss Base Fan 8:128 56651 OWT Timber Bolt 8-10"1 56622 1-1/4" Hammered Dome Cap Nut
28 1x6x12L 1x6x121 2x8x12L 2x8x121 4x6x12L 4x6x123 4x10x10L 4x10x10
11 4x6x8L 4x6x82 4x10x12L 4x10x124 8x8x8L 8x8x8
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
51736
56625
51709
5661256651
5662256619
51718
OZCO6OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
51711
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
Suggested Tools(others may be required)
7OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
8x8 Cedar Post2 dato cuts
8'0"
beam width
2" typ2 sides
2"
4x10 Cedar BoardBar
8'4 12 "
1" X 45°
Cutlist18OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
56°
34°
1116 "
1"
1 34 "
56°
56°
4X6x12 Cedar Board;Web
2'5 916 "
4X6 Cedar BoardKing Post
3'1"
Cutlist29OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
4X6 Cedar BoardRafter
6'10 1516 "
7 34 "
56°
2 38 "
56°
56°
Cutlist310OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
4x10 Cedar BoardBeam
[3658]144"
4 1516 " X 45°
2x8 Cedar BoardTop Beam
[3658]144"
Cutlist411OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
13'0"
13'0"
9'4 18 "
9' 12 "
Locate desiredcenter of structure
if site is not level,see Ozco Site Leveling instruction
site plan12OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
step 113OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
flush
widthof beam
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
step 214OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
flush
step 315OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
= =
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
step 416OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
rafter
web
king postCL
6 1
4 "
5 12 "
step 5 Truss OverviewOZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
17
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
king post
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
line up withcenterline ofbeam
CL
step 618OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
Rafter1-7/8 to 2"use scrap wood to set gap
step 719OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
Web
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
step 820OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
repeat Truss on opposite end
repeat connectors on inside of Pavilion (both ends)
step 9OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
21
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
==
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
step 1022OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
2'6"
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
CL
step 1123OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
secure with nails or screws
for additional roofing, see OZCO Project #339 - 10x10 Pavillion Roofing
step 1224OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/1/2017 . This information is updated periodically and should not be relied upon after 2 years from 3/1/2017 . Please visit OZCOBP.com to get current information.
Tool Required3/8" Driver
(HCN) provided
(OWT Timber Screw)provided
inside view 3 remaining Dome Cap
Nuts
step 1325OZCO Project #210 IW- Wood Post & Beam Pavilion - Free Standing
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
4x
4x Beam Installation3 style choices•When 4x lumber not available •or cost effectivesee subsequent pages for •details on each style
see product installation instructions for hardware installation
Ian's Concept
Ian's Concept 1
2x Stagger 2x Sandwich
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
no post cuts
polyurethane adhesive, clamp & nail
3" nail as desired
2x Stagger2Ian's Concept
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
dato cut (2 sides)
X - 1.75”
Y
X
Y
polyurethane adhesive, clamp & nail
nail as desired
2x SandwichIan's Concept 3
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
dato cut (2 sides)
X – 1.75”
Y
Y
X
4xIan's Concept 4
V2.00 - Installation Instructions, Specifications and Project Plans are effective 6/14/2017 . This information is updated periodically and should not be relied upon after 2 years from 6/14/2017 . Please visit OZCOBP.com to get current information.
set saw cut depth;start cuts 1/4" from top
remove pieces
pencil
mark ledge location
Y
multiple cuts approximately 1/4"
apart to mark
Dato cut details5Ian's Concept