Oyster BMP Expert Panel · 2017. 1. 9. · Oyster Best Management Practice Expert...
Transcript of Oyster BMP Expert Panel · 2017. 1. 9. · Oyster Best Management Practice Expert...
Oyster Best Management Practice Expert Panel—Recommendations on the Oyster BMP Reduction Effectiveness Determination Decision
Framework and Nitrogen and Phosphorus Assimilation in Oyster Tissue Reduction Effectiveness for Oyster Aquaculture Practices
WQGIT Approval Decision Meeting
December 19, 2016
Jeff Cornwell, University of Maryland Center for Environmental Science, Panel Chair
Julie Reichert-Nguyen and Ward Slacum, Oyster Recovery Partnership, Panel Coordinators
Recommendations in the First ReportThe Panel’s recommendations found in the first incremental report include:
• A decision framework to incrementally determine the nutrient (nitrogen and phosphorus) and suspended sediment reduction effectiveness of oyster practices for BMP application.
• Default reduction effectiveness estimates for the “Nitrogen Assimilated in Oyster Tissue” and “Phosphorus Assimilated in Oyster Tissue” reduction effectiveness protocols for oyster practices in the following oyster practice categories:
• Off-bottom private oyster aquaculture using hatchery-produced oysters• On-bottom private oyster aquaculture using hatchery-produced oysters• On-bottom private oyster aquaculture using substrate addition
• Methodology to establish site-specific estimates.
2
Oyster Fate
Fisheries
Management
Approach
Oyster Culture
Type/Ploidy
Hatchery-
produced
oysters
(diploid)
Hatchery-
produced
oysters
(diploid)
Activity/Culture
Method
Grown off
the bottom
using some
sort of gear
Grown on
the bottom
using no
gear
Moving wild
oysters from
one location
to another
Addition of
substrate to
the bottom
to enhance
recruitment
of wild
oyster
larvae
None
Addition of
hatchery-
produced
oysters (e.g.
spat-on-
shell)
Moving wild
oyster from
one location
to another
Addition of
substrate to
enhance
recruitment
of wild
larvae
None
Sanctuary
creation
followed by
addition of
hatchery-
produced
oysters
Sanctuary
creation
followed by
addition of
substrate
Sanctuary
creation
Oyster Practice
Title
Off-bottom
private
oyster
aquaculture
using
hatchery-
produced
oysters
On-bottom
private
oyster
aquaculture
using
hatchery-
produced
oysters
On-bottom
private
oyster
aquaculture
using
transplanted
wild oysters
On-bottom
private
oyster
aquaculture
using
substrate
addition
Private
oyster
aquaculture
with no
activity
On-bottom
public
fishery
oyster
production
using
hatchery-
produced
oysters
On-bottom
public fishery
oyster
production
using
transplanted
wild oysters
On-bottom
public
fishery
oyster
production
using
substrate
addition
Public
fishery with
no activity
Active
oyster reef
restoration
using
hatchery-
produced
oysters
Active
oyster reef
restoration
using wild
oysters
Passive
oyster reef
restoration
*Panel
Recommends for
BMP
Consideration
Yes Yes No Yes No TBD TBD TBD TBD TBD TBD TBD
Hatchery-produced
oysters (diploid or
triploid)
Wild oysters (diploid) Wild oysters (diploid) Wild oysters (diploid)
Oysters removed (harvested) from Bay Oysters remain in Bay
Private oyster aquaculture (permitted) Public fishery Oyster reef restoration (sanctuaries)
Decision Framework—Chesapeake Bay Oyster Practices
3
Decision Framework: Oyster-Associated Reduction Effectiveness Protocols
4
1. Nitrogen Assimilation in Oyster Tissue
2. Nitrogen Assimilation in Oyster Shell
3. Enhanced Denitrification Associated with Oysters
4. Phosphorus Assimilation in Oyster Tissue
5. Phosphorus Assimilation in Oyster Shell
6. Suspended Sediment Reduction Associated with Oysters
7. Enhanced Nitrogen Burial Associated with Oysters
8. Enhanced Phosphorus Burial Associated with Oysters4
Decision Framework: Panel’s Incremental Approach
5
• First report includes recommendation for 10 of the 96 oyster practice-reduction protocol combinations:• “#” indicates that there was enough existing
data to determine a reduction effectiveness estimate.
• “x” indicates that the Panel felt the practice would not result in net reduction of pollutant.
• For same pollutant, reduction effectiveness would be additive (e.g., N assimilation in tissue + N assimilation in shell + enhanced denitrification + enhanced N burial = total N reduction).
• Public fishery and oyster reef restoration practices will also be covered in future reports.
Oyster Practice-
Reduction
Protocol
Combination
Off-bottom
private oyster
aquaculture
using hatchery-
produced
oysters
On-bottom
private oyster
aquaculture
using hatchery-
produced
oysters
On-bottom
private oyster
aquaculture
using
transplanted
wild oysters
On-bottom
private oyster
aquaculture
using substrate
addition
Private oyster
aquaculture
with no activity
Nitrogen
Assimilation in
Oyster Tissue
1st
(#)
1st
(#)
1st
(x)
1st
(#)
1st
(x)
Nitrogen
Assimilation in
Oyster Shell
Future Report Future Report Future Report Future Report Future Report
Enhanced
Denitrification
Associated with
Oysters
Future Report Future Report Future Report Future Report Future Report
Phosphorus
Assimilation in
Oyster Tissue
1st
(#)
1st
(#)
1st
(x)
1st
(#)
1st
(x)
Phosphorus
Assimilation in
Oyster Shell
Future Report Future Report Future Report Future Report Future Report
Suspended
Sediment
Reduction
Associated with
Oysters
On hold On hold On hold On hold On hold
Enhanced
Nitrogen Burial
Associated with
Oysters
On hold On hold On hold On hold On hold
Enhanced
Phosphorus Burial
Associated with
Oysters
On hold On hold On hold On hold On hold
Private Oyster Aquaculture
Oyster Practice Categories Defined
6
Category Oyster Practice Description
A
Off-bottom private
oyster aquaculture
using hatchery-
produced oysters
Hatchery-produced diploid or triploid oysters grown off the bottom in the water column
using some sort of gear (e.g., floating rafts near the surface or cages near the bottom) in
an area designated for oyster aquaculture where public fishing is not allowed (e.g.,
State-permitted oyster aquaculture leases to private oyster aquaculturists) for eventual
removal from the water.
B
On-bottom private
oyster aquaculture
using hatchery-
produced oysters
Hatchery-produced diploid or triploid oysters (e.g., spat-on-shell) grown directly on
bottom using no gear in an area designated for oyster aquaculture where public fishing
is not allowed (e.g., State-permitted oyster aquaculture leases to private oyster
aquaculturists) for eventual removal from the water.
D
On-bottom private
oyster aquaculture
using substrate
addition
Placing oyster shell or alternative hard substrate, such as granite, at the bottom
sediment surface to attract recruitment of wild (diploid) oysters in an area designated
for oyster aquaculture where public fishing is not allowed (e.g., State-permitted oyster
aquaculture leases to private oyster aquaculturists) for eventual removal from the water.
Note: Definitions were modified after comments from WQGIT during November 28, 2016 meeting to clarify what is meant by “private oyster aquaculture.” Private refers to designated oyster aquaculture areas where public fishing is not allowed, such as State-permitted oyster aquaculture leases to private oyster aquaculturists.
Reduction Effectiveness Qualifying Conditions
The Panel agreed that the qualifying conditions described below would apply to both the default and the site-specific estimates:
• Only includes oysters that are removed moving forward from the time the BMP is approved/implemented for reduction effectiveness credit in the TMDL. This baseline condition was proposed by the CBP Partnership Management Board and the Panel concurs with their decision.
• Oysters had to have been grown from initial sizes < 2.0 inches shell height.
• Oysters have to be alive when removed to count toward the reduction effectiveness.
7
Panel’s Method to Determine Conservative Default N and P Reduction Effectiveness Estimates
Step 1: Determine the oyster shell height to tissue dry weight quantile regression equations for diploid and triploid oysters
• Analysis included consideration of various oyster growth influencing factors: ploidy, culture method and type, location/environment, and season.
• Quantile regression uses the median of the data—less influenced by extremes (good statistical approach to use with highly variable data).
Step 2: Establish oyster size class ranges for the shell height midpoints that will be used to calculate the oyster soft tissue dry weight
Step 3: Establish and apply the percent nitrogen and phosphorus content in oyster tissue to determine the reduction effectiveness estimates
8
Default Calculation: Shell Height to Dry Tissue Weight Regression Equations for Diploids and Triploids
Triploid 0.5 Quantile Curve, y = 0.00005x2.39 (n = 1,066 oysters)
Diploid 0.5 Quantile Curve, y = 0.0004x1.82 (n = 5,750 oysters)
Diploid Error:a = ± 0.00006b = ± 0.03427
Triploid Error:a = ± 0.00002b = ± 0.08846
Conclusions: • Enough data were available to
establish shell height to tissue dry weight regression equations.
• Differences in biomass between diploid and triploid oysters warranted the use of separate regression equations.
• 50th quantile conservatively accounts for differences in culture method and type (off-bottom/on-bottom, hatchery-produced/wild) location/environment, and season (see report for details).
9
Default Reduction Effectiveness Estimates for N and P Assimilated in Oyster Tissue
10
Default Estimates
Oyster Size Class
Range
(inches)
Size Class
Midpoint
(inches)
Size Class
Midpoint
(mm)
Content in Oyster Tissue (g/oyster)
Diploid Triploid
Nitrogen Phosphorus Nitrogen Phosphorus
2.0 - 2.49 2.25 57 0.05 0.01 0.06 0.01
2.5 - 3.49 3 76 0.09 0.01 0.13 0.01
3.5 - 4.49 4 102 0.15 0.02 0.26 0.03
4.5 - 5.49 5 127 0.22 0.02 0.44 0.05
≥ 5.5 6 152 0.31 0.03 0.67 0.07
Nitrogen: 8.2% average nitrogen content in oyster tissue dry weight (based on 7 studies in waterbodies along the Atlantic Coast; used the average of the site means for studies outside of Chesapeake Bay; site-specific averages were used for studies within Chesapeake Bay)
Phosphorus: 0.9% average phosphorus content in oyster tissue dry weight (based on 3 studies in Chesapeake Bay; same averaging approach as nitrogen, but only studies in Chesapeake Bay were found)
Methodology for Site-Specific EstimatesThe Panel is recommending an option where the BMP implementer can apply for a site-specific estimate.
The oyster BMP implementer works with the reporting jurisdiction and CBP Partnership to define:
o Practice-specific oyster size class categories if using different categories than the default estimate
o Two timeframes set by the State to reflect seasonal differences ~ 6 months apart.
Once approved by the CBP Partnership, the operation will have 50 random oysters per size class per season analyzed to
determine the average tissue dry weight.
Samples are sent to a lab that uses standardized methods to acquire the tissue dry weight in grams (e.g., tissue heated at
60°C until samples reach constant weight).
The average tissue dry weight for each size class is multiplied by the default 8.2% N content and 0.9% P content in oyster tissue
to determine the site-specific reduction effectiveness estimates.
Review and approval of site-specific estimates follow a similar approach as the re-evaluation procedure of existing estimates
described in the CBP Partnership BMP Expert Review Protocol. Same goes for re-evaluation of the site-specific estimates.
Once approved by the CBP Partnership, the estimate would be applicable for that practice as long as they continue growing
oysters under the same conditions when the reduction effectiveness evaluation was made.11
Recommended Application Guideline—Movement of OystersThe Panel identified instances where oysters are moved from their initial grow-out location to another location in the Bay
or elsewhere. Reasons for moving the oysters include:
• Changing the taste by moving oysters to an area with higher salinity
• Water quality problems in the initial grow-out location.
Panel Recommendation: The Panel decided that partitioning the credit wouldn’t be necessary because oysters are either
moved when they are less than 2 inches (entire credit would be applied to the final grow-out location) or they are moved
for only a short period of time to the final grow-out location (entire credit would go to the initial grow-out location). The
Panel recommended the below crediting scenarios instead using the average shell height verification check of 50 random
oysters when oysters are moved to determine whether the credit is applied to the initial or final grow-out location.
12
Location A
(initial)
Oysters <
2.0 inches
Location B
receives
entire credit
(final)
Scenario 1
Location A
receives
entire credit
(initial)
Oysters ≥
2.0 inches Location B
(final)
Scenario 2
Recommended Reporting GuidelinesIndividual oysters would be the preferred reporting unit. However, since there are varying units (e.g., bushels, boxes) currently being used to report oyster harvest, the Panel recommends that the following information be reported to account for this in order to offer flexibility to reporting jurisdictions (i.e., State agencies) in verifying the reduction effectiveness in a scientifically-defensible manner.
1. Type and total # of containers- The type (bushel, box,) and total # of containers used to package oysters.
2. Average # of oysters in each container type- Needed to figure out the total # of removed oysters to apply the reduction effectiveness estimates to on an annual basis. • Verification Guideline: Quantify average # of oysters in a container by counting and documenting the
total # of oysters in 10 containers two times a year (~ 6 months apart) to account for seasonal differences.
3. The average size of oysters in each container type- Needed to figure out which oyster size class estimate to use.• Verification Guideline: Quantify the average size of oysters in containers by measuring the shell heights
of 50 randomly selected oysters from representative containers two times a year (~ 6 months apart) to
account for seasonal differences.
13
Recommended Default Approach to Deal with Missing Verification and Ploidy Information
Missing Verification Measurements
Panel Recommendation: If average oyster shell heights and average numbers of oysters in containers are not known then a default approach where the minimum legal size of oysters and State documented information specifying the average number of minimum legal sized oysters can be packaged in a specific container is used.
Example: State minimum legal harvestable size is 3 inches and they define bushels as 300 individual oysters. If verification measurements are missing, then all bushels would be multiplied by 300 and individual oysters assigned to the 2.5-3.49 inch oyster size class reduction effectiveness estimate for diploids.
Missing Ploidy Designation
Panel Recommendation: If ploidy is missing, then apply the diploid estimates.
14
Reduction Effectiveness Options—Offers Scientifically-Defensible Flexibility to Implementing Programs
• Apply minimum default estimate
• Use ploidy identification and size class verification measurements to apply the corresponding default diploid or triploid size class estimate
• Use Panel’s recommended methodology to establish a site-specific estimate for the practice
15
Most Simple
Approach
(estimates
conservatively-
derived; likely
under-estimates
reduction)
Most Complex
Approach
(most representative
of the actual
reduction)
16
BMP NameLbs N Reduced/1,000,000
Oysters Harvested
Lbs P Reduced/1,000,000
Oysters Harvested
Diploid Oyster Aquaculture 2.25 Inches 110 22
Diploid Oyster Aquaculture 3.0 Inches 198 22
Diploid Oyster Aquaculture 4.0 Inches 331 44
Diploid Oyster Aquaculture 5.0 Inches 485 44
Diploid Oyster Aquaculture ≥ 5.5 Inches 683 66
Triploid Oyster Aquaculture 2.25 Inches 132 22
Triploid Oyster Aquaculture 3.0 Inches 287 22
Triploid Oyster Aquaculture 4.0 Inches 573 66
Triploid Oyster Aquaculture 5.0 Inches 970 110
Triploid Oyster Aquaculture ≥ 5.5 Inches 1,477 154
Site-Specific Monitored Oyster Aquaculture NA NA
Technical Appendix: Reduction Effectiveness Estimates for N and P Assimilated in Oyster Tissue (Summarized for use in Model from Panel’s Findings)
Above BMPs would be reported annually and are only eligible in tidal waters
17
Technical Appendix: Reporting Requirements
Technical Appendix: Additions by WTWG—Approved on December 1, 2016
Q8: How will the practice be credited in the Phase 6 Watershed Model?
A8: The Phase 6 Model will have an estimated nutrient load in shoreline segments that can be reduced by shoreline and tidal water practices. The pounds of nutrients reduced by this practice will be credited as a reduction to the nutrient loads in the nearest shoreline segments to the practice location. If latitude and longitude are not submitted, then the practice benefits will be distributed amongst all shoreline segments in the geography submitted.
The WTWG will work with the Chesapeake Bay Program Office to investigate potential changes to NEIEN that would allow states to report tidal geographies, rather than land-based geographies.
The WTWG will work with the Modeling Workgroup to determine if a cap on load reductions is appropriate for this and other site-specific pound reduction BMPs including stream restoration, shoreline management, and algal flow-ways. 18
How to Keep Informed of the Oyster BMP Expert Panel Efforts
19
Oyster Recovery Partnership webpage summarizing Panel progress:
oysterrecovery.org/water-quality-improvement/
QUESTIONS?
Data Locations Used for Regression Equations
• 22 general locations (1 triploid only site, 19 diploid only sites, and 2 sites with triploid and diploid oyster data).
• Location/, the oyster data were also grouped by where the location fell in the Chesapeake Bay Program Bay zones (Upper, Mid, and Lower) and by the its salinity characteristic (mesohaline or polyhaline).
Upper
Bay
Lower
Bay
Mid Bay
20
Comments on Reduction Effectiveness
The shell height to tissue dry weight 50th quantile equation was derived from data representing both off-bottom (water column) and on-bottom culture methods.
21