Oxylator Overview by Jim DuCanto, MD
-
Upload
emcrit-blog-and-podcast -
Category
Health & Medicine
-
view
142 -
download
0
Transcript of Oxylator Overview by Jim DuCanto, MD
The Oxylator—A Compact and Durable Patient Responsive
Ventilation System for Resuscitation, Transport and
Ventilation Therapy.
James C. DuCanto, M.D.
Assistant Clinical Professor
Dept. of Anesthesiology
Medical College of Wisconsin
Director of Anesthesiology Clerkship
Aurora St. Luke's Medical Center
Milwaukee, Wisconsin
The presenter has no conflict of interests or financial interests regarding the technology discussed in this lecture.
Dr. DuCanto has received demonstration devices from CPR Medical Devices, Inc. for investigations regarding ventilation in the Operating room and during Transport.
What is an Oxylator? A durable and portable ventilation tool that
appears similar in form to a “Demand Valve”, but incorporates patient responsive technology centered around a sensitive proprietary valve technology that is 20 times faster than the current generation of ventilators.
It is similar to a demand valve that has transformed technologically into a system that delivers Oxygen (or Air) based upon continual monitoring of patient airway pressure, and relies upon the free and unobstructed flow of gas into the patient to permit its normal functioning. Oxylator works with:
Facemask (Anesthesia mask and BiPAP Mask) Supraglottic Airways (Laryngeal Mask,
Combitube/Laryngeal tube) Tracheal Tube Ventilating Rigid Bronchoscope
The Oxylator Solves Several Important Problems
Over-Ventilation during CPR and Resuscitation Adequate Ventilation during continuous CPR
(without interruption at 100 compressions per minute).
The Problem of Inconsistencies of Ventilation with BVM's.
The Problem of the Patient Resisting the Ventilation Equipment.
The Demand Valve
Pioneered EMS Manual Triggered Ventilation
Use curtailed in the 1980's due to the lack of pressure limiting safeguards.
Flow rates between 40 lpm to 160 lpm (!).
Goals in the Use of the Oxylator
Simplify and Improve Ventilation for Providers of all Skill Levels.
Reduce the phenomena of hyperventilation during CPR and resuscitation
Cerebral vasoconstriction Documented reduction in survival with ACLS
Permit consistent ventilation regardless of rescuer skill level.
In Essence, the goal is to Create an “AED” for Ventilation. Device is gentle in its interaction with the patient,
limited in flow rates and pressures to eliminate the potential complications of its ancestor, the demand valve.
The “AED” of Ventilation (Europe)
How is the Oxylator More “Patient Responsive” Than Our Current
Generation of Ventilation Equipment?
The patient responsiveness is centered around the unique proprietary valve technology which operates according to a variable magnetic field Oxylator reacts 20 times faster to changes in flow
and airway pressure than the current generation of ventilators
Valve reactivity time is 17 millseconds (compared to 150-200 milliseconds for most other ventilators
Keys to the Oxylator's Patient Responsiveness
Patience: Oxylator flow is limited to 30 lpm (compared to 40-60 lpm with ventilators as well as BVM's).
Perceptiveness: Oxylator flows until a peak pressure is achieved, then activates a passive exhaltory phase. This peak pressure is achieved when the patient
dictates it as so, i.e., when they feel the need to exhale).
Our current generation of ventilation equipment are NOT patient responsive—they force the breath into the patient, often at the patient's objection. Delivery of set rate and tidal volumes (or peak
pressures) lead to continuation of the inspiratory phase of ventilation beyond the point of patient tolerance
That's why patients “buck” the ventilator Incoming breath limited by high pressure alarm setting With BVM, patient responsiveness is limited to releasing
the bag when the patient coughs
History
An Innovation of a Paramedic in Ontario Province, Canada (now deceased) Modify the demand valve to be patient responsive
using a similar magnetic mechanism to the Bird Mark 7.
Simplify resuscitation an transport of critically ill/injured patients.
Establish safeguards within the system to avoid patient injury.
Technology acquired and refined by CPR Medical Devices, Inc. in the late 1980's. Technology refined and made reliable and
reproducible on a mass scale. Over 30,000 Oxylators are in service today across
the world, the greater majority of them are in service in Europe and Asia.
Munich Fire Department National Health Service of Great Britain National Health Service of Korea US Military Special Forces (Airforce) State of Georgia (Homeland Security)
BVM vs Oxylator
Variable Flow Rates (operator dependent). Variable tidal volumes Variable Minute Ventilation Hyperventilation is common (Aufderheide,
et.al.).
Hyperventilation is Deleterious During CPR
A clinical observational study revealed that rescuers consistently hyperventilated patients during out-of-hospital
cardiopulmonary resuscitation (CPR).
The objective of this study was to quantify the degree of excessive ventilation in humans and determine if comparable excessive ventilation rates during
CPR in animals significantly decrease coronary perfusion pressure and survival.
Circulation. 2004;109:1960-1965
In 13 consecutive adults (average age, 63±5.8 years)
receiving CPR (7 men), average ventilation rate was 30±3.2 per minute (range, 15 to 49).
Average duration per breath was 1.0±0.07 per second.
No patient survived.
Hemodynamics were studied in 9 pigs in cardiac arrest ventilated in random
order with 12, 20, or 30 breaths per minute.
Survival rates were then studied in 3 groups of 7 pigs in cardiac arrest.
Survival rates were 6/7, 1/7, and 1/7 with 12, 30, and 30+ CO2 breaths per minute, respectively (P=0.006).
Recent findings: There is an inversely
proportional relationship between
mean intrathoracic pressure,
coronary perfusion pressure,
and survival from cardiac arrest.
Increased ventilation rates and increased ventilation duration impede venous blood return to the heart Decreasing hemodynamics and coronary
perfusion pressure during cardiopulmonary resuscitation.
There is a direct and immediate transfer of the increase in intrathoracic pressure to the cranial cavity with each positive pressure ventilation reducing cerebral perfusion pressure.
Oxylator Models
Multiple Models for various applications, all work the same way. EM-100 EMX FR-300 HD “Special Hazardous Model” for Mining Industry
The Oxylator EM-100
The first commercially available model circa 1994.
Pressure Release (i.e., limit) range 25-50 cm H2O.
In use by the Korean National Health Service since 2000?
Class I device Guidelines for CPR
and Emergency Cardiac Care
Published studies are limited to its use as a resuscitator
Constructed for effective use in adverse environments and circumstances Hazardous
Environments Mass Casualty Military
The Oxylator EMX
Intended for the EMS Market
Pressure Release (Limit) 20-45 cm H2O
EMX-B model constructed for explosive environments.
The Oxylator HD
Intended for Hospital use to fulfill a variety of roles.
Pressure Release (Limit) 15-30 cm H2O
Pressure Limits 15-50 cm H2O and the Potential for Gastric Insufflation
The Absolute Pressure is a Static measurement of gas performance in the airway.
Inspiratory Flow Rate is a Dynamic Measurement, which better explains the phenomena of Gastric Insufflation during mask or SGA ventilation. A Dynamic Force is Required to open the Upper
Esophageal Sphincter (UES), which is a “physiologic” structure, not an actual anatomic apparatus.
High Gas Flows Open the UES
Dynamic Descriptions of Gas behavior describe the conditions necessary to overwhelm the UES Mass moved over a distance equal to force Tissue moved out from its relaxed position (upper
esophagus/UES) from pharynx to stomach requires force to achieve this transfer of gas.
It is not the pressure—it is the speed at which the gas is introduced to the system that explains the Gastric Distension phenomena
How Can The Oxylator not Contribute to Gastric Insufflation?
Maximum flow rate of 30 liters per minute does not contain the energy to overwhelm the UES.
Basic Principles of Function
Inhalator Mode—Passive Insufflation of O2 at 15 lpm “T-Piece” Mode Patient will entrain room air during spontaneous
ventilation Activated with turning the Inhalator knob to open Can be used concurrently with the Manual and
Automatic Modes (Active insufflation of Oxygen to the release pressure).
Inhalation Phase Active (Insufflates 30 lpm O2). Manual Mode (Press and release Oxygen Release
Button Inspiratory Time according to Rescuer or until Pressure
Release Setting Reached, then Passive Exhalation Phase Activated
Automatic Mode (Press and lock Oxygen Release Button Clockwise Rotation)
Oxylator will Insufflate O2 to the Release Pressure Following Passive Exhalation Phase (Airway Pressure 2-4
cm H2O), a New Inspiratory Phase will Begin.
Exhalation Phase passive to airway pressure of zero (Manual Mode) or 2-4 cm H2O (Automatic Mode).
Minute Ventilation 12-13 lpm. Slightly hyperventilates patient (EtCO2 29-31 during
clinical anesthesia). Rescuer/Clinician selects mode of operation
with a single button.
Inhalation Phase
Triggered by the Oxygen Release Button Depressed intermittently (Manual Mode) or
constantly (Automatic Mode). Inhalation rate limited to 30 liters per minute
(lpm). Minimal PEEP 4 cm H2O in automatic mode. Inhalation phase ends with either the cessation
of flow, or the attainment of the Pressure limit (set by the Pressure Release Selector).
Exhalation Phase Passive Minimal PEEP 4 cm H2O in automatic mode.
A new respiratory cycle (in automatic mode) will not begin until the exhalation cycle is complete Airway pressure between 2-4 cm H2O
How Does The Oxylator Work?
Flow Triggered Oxygen Delivery to an Adjustable Pressure Limit (Release) Flow begins with activation of device and continues
until a set pressure limit is reached, then initiates a passive exhalation phase which continues until the airway pressure falls to between 2-4 cm H2O (Automatic mode).
The Oxylator will not start a new respiratory cylce until exhalation is complete
Activation of the Oxygen Release Button
Gold Button (all Oxylator Models)
Begin Inhalation flow rate 30 liters per minute (lpm) Flow is low enough to
prevent esophageal sphincter compromise during mask and SGA ventilation
Inhalation flow rate 30 liters per minute (lpm) Flow is low enough to prevent esophageal sphincter
compromise during mask and SGA ventilation
Connections for Face mask, supraglottic airway or Tracheal Tube---15 mm and 22 mm connections. Also adaptable to ventilating rigid bronchoscope
Airway obstruction interpreted by the Oxylator as a No-Flow state—device will cease oxygen flow and will NOT overpressurize the patient's airway.
Anatomy
Operating Requirements
Operating Pressure of 55 psi (optimal) Device will function between a range of supply
pressures from 40 psi to 90 psi due to an integral second stage regulator.
Medical Oxygen or Air from main hospital supply
Medical Oxygen from tank (DISS Outlet) Medical Air from Compressor
Mass Casualty/Military
Training Requirements
Familiarization with proper compressed gas handling procedures (Tanks and Regulators)
Familiarization with Three Modes of Operation: Inhalator Mode (Spontaneous Ventilation) Manual Mode (Oxygen Release button depressed
intermittently) Automatic Mode (Oxygen Release button locked in
depressed position)
Mask ventilation technique Mask fit and seal Jaw thrust, Head Tilt Oral Airway if needed
Advantages of Oxylator During Mask Ventilation
Two-Handed Mask Ventilation Technique without a Second Rescuer (Oxylator in Automatic Mode).
Instant Feedback as to the Adequacy of Airway Management Maneuvers Mask Leak—Oxylator Continues to Flow Without
Pressure Cycling Obstructed Airway—Oxylator will “Chatter” or will
not Flow oxygen at all
Patient Responsiveness When examined in the Draeger facility in Europe,
the valve reactivity time was measured at 17 milliseconds.
Oxylator has the ability to react to changes in airway flow and pressure as fast as 17 milliseconds
This is a rate that is 20 times faster than the human nervous system can react
The patient thus sees the Oxylator as something that reacts instantly to changes in patient airway patency and compliance.
Cleaning and Care
Clinical Utility and Versatility
Labor saving device Leaves Rescuer free
to attend to other tasks
Uniform Delivery of Ventilation
Immediate Notification of Airway Obstruction through device
Future Potential