Oxygen Supplementation Device - jorvet.comOxy Hood Oxygen Supplementation Device The challenge of...
1
Oxy Hood Oxygen Supplementation Device T he challenge of delivering oxygen to an animal in respiratory distress is difficult in most veterinary clinical situations. An oxygen cage or an ICU unit is an expense beyond the budget of most clinics. The hand held use of anesthesia masks or nasal cannuals is stressful to the animal and labor intensive. The Oxy Hood was developed to deliver oxygen in a less restrictive and stressful environment. The Oxy Hood uses the conventional cone shape of an Elizabethan collar and adds a clear plastic “lid” over the end. Numerous vent holes throughout the cone allow the excess gas to vent. Oxygen is provided to the Oxy Hood via nasal cannula attached to the hood. The oxygen source uses a bubble humidifier to prevent drying of the respiratory tract. OTHER FEATURES: - Collar is sewn to nylon fabric with draw strings plus velcro attachment which allows for proper neck sizing. - The lid or face of the unit is attached with a zipper. - Clear plastic material is used throughout for better observation and for the animal to see clearly. - Four sets of holes are die cut to allow ventilation of carbon dioxide and to maintain the oxygen level at no more than 60% - Very small animals can be placed totally inside the large Oxy Hood, like an oxygen tent. - Comes complete with nebulizer, oxygen nasal cannula, and oxygen tubing. - Connectors that allow hook-up to an anesthesia machine if that is the oxygen source. PRODUCT CODES: J-652a small for cats and smaller dogs (under 15 lbs.) J-652b medium animals (15-30 lbs.) J-652c large animals (30-60 lbs.) J-652s set of all three sizes NOTE:To connect Oxy Hood requires an oxygen flowmeter. Suggestions: “H” tank use J-533A; “E” tank use J-533EF; most anethesia machine flowmeters can be used; freestanding flowmeter (J-534B) attached to the top of the humidifier. OXYGEN ACCESSORIES: J-653 Humidifier/nebulizer J-654 Oxygen nasal cannula (4pk) J-655 Oxygen supply clear tubing, 7ft (4pk) J-655L Oxygen supply clear tubing, 25ft. (2pk) J-656 Oxygen catheter, 14fr x 16” (4pk) J-656AOxygen catheter, 16fr x 16”(4pk) Jorgensen Laboratories, Inc. 1450 Van Buren Avenue Loveland, CO 80538 (800) 525-5614 www.JorVet.com [email protected] Humidifier
Transcript of Oxygen Supplementation Device - jorvet.comOxy Hood Oxygen Supplementation Device The challenge of...
-
Oxy HoodOxygen Supplementation Device
The challenge of delivering oxygen to an animal in respiratory distress is difficult in most veterinary clinicalsituations. An oxygen cage or an ICU unit is an expense beyond the budget of most clinics. The hand helduse of anesthesia masks or nasal cannuals is stressful to the animal and labor intensive.The Oxy Hood was developed to deliver oxygen in a less restrictive and stressful environment. The Oxy Hooduses the conventional cone shape of an Elizabethan collar and adds a clear plastic “lid” over the end. Numerousvent holes throughout the cone allow the excess gas to vent. Oxygen is provided to the Oxy Hood via nasalcannula attached to the hood. The oxygen source uses a bubble humidifier to prevent drying of the respiratorytract.OTHER FEATURES:- Collar is sewn to nylon fabric with draw strings plus velcro attachment which allows for proper neck sizing.- The lid or face of the unit is attached with a zipper.- Clear plastic material is used throughout for better observation and for the animal to see clearly.- Four sets of holes are die cut to allow ventilation of carbon dioxide and to maintain the oxygen level at no morethan 60%- Very small animals can be placed totally inside the large Oxy Hood, like an oxygen tent.- Comes complete with nebulizer, oxygen nasal cannula, and oxygen tubing.- Connectors that allow hook-up to an anesthesia machine if that is the oxygen source.PRODUCT CODES:J-652a small for cats and smaller dogs (under 15 lbs.)J-652b medium animals (15-30 lbs.)J-652c large animals (30-60 lbs.)J-652s set of all three sizesNOTE:To connect Oxy Hood requires an oxygen flowmeter.Suggestions: “H” tank use J-533A; “E” tank use J-533EF; mostanethesia machine flowmeters can be used; freestanding flowmeter(J-534B) attached to the top of the humidifier.
OXYGEN ACCESSORIES:J-653 Humidifier/nebulizerJ-654 Oxygen nasal cannula (4pk)J-655 Oxygen supply clear tubing, 7ft (4pk)J-655L Oxygen supply clear tubing, 25ft. (2pk)J-656 Oxygen catheter, 14fr x 16” (4pk)J-656AOxygen catheter, 16fr x 16”(4pk)
Jorgensen Laboratories, Inc.1450 Van Buren Avenue Loveland, CO 80538 (800) 525-5614 www.JorVet.com [email protected]
Humidifier
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice
