owners manual RMC Polydrive II Midi
-
Upload
bestacoustics-reinhardt -
Category
Documents
-
view
460 -
download
34
description
Transcript of owners manual RMC Polydrive II Midi
RMC
MONO OUT INPUT POLY OUT
INSTR HI MID LO SYNTH VOL VOL
SW 1 SW 2
Poly-Drive II
Mid-Range FREQUENCYSelect sw.
SW 1 & SW 2Mode selectorsfor Roland processorsand MIDI converters
SYNTH VOLUME0 to +5V D.C.Control Voltage
Up : 1200 Hz
Dn : 700 Hz
BASS ±12dB @ 120Hz
MID-RANGE ±12dB
TREBLE ± 12 dB @ 6KHz
INSTRUMENT VOLUMEcontrols instrumentloudness only
POLYPHONIC OUTPUT Jack 13 pin DIN connector
POLYPHONIC INPUT Jack 8 pin DIN connector
MONO OUTPUT Jack 1/4" Phone jack. Insertion activates onboard battery
General Description
The RMC Poly-Drive II is a 6 channel polyphonic preamp with 3-band Equalizer and guitar/synth controlsin a Direct Box format. The unit measures 3.5" X 4.5" X 2.25" and operates either from the onboard 9V battery or from bipolar phantom power (±7 V.D.C.) typically provided by Roland guitar/synths and compatible processors.The Polyphonic section of the preamp buffers the separate string signals and routes them separately to thePOLY OUT jack. The separate string signals are also combined in the 'DMX' feedback elimination circuitwhich produces a mono instrument signal. The mono signal is then equalized, passed through the INSTR.VOLUME control, buffered with a low output impedance Line Driver and fed to both the MONO OUT and pin 7 of the POLY OUT jack.