Our pillar High technology at - monitor-ltd.ru · Our pillar– High technology at ... project of...
Transcript of Our pillar High technology at - monitor-ltd.ru · Our pillar– High technology at ... project of...
Monitor ltd. is one of the leading companies in Russia in the field of medical equipment production.
It was founded on February 14, 1992
Address: 344068, Russia, Rostov-on-Don, str. Krasnokursantskaya, 104A.
Tel/Fax +7 (863) 243-61-11, 231-04-01, 243-63-77
e-mail: [email protected] www.monitor-ltd.ru
Our activities:
Developing and manufacturing of the diagnostic medical equipment:
- diagnostic patient monitors, central monitoring stations;
- ECG machines, stress-test systems and graphic spirometers.
Our activities:
Developing and manufacturing of the diagnostic medical equipment.
Our activity is the production of diagnostic patient monitors, 1/3 and
3/4/6/12 channel ECG machines and graphic spirometers. There are many
thousands medical devices produced by our company in use all over the
world: on the whole territory of Russia, in Europe, Asia and Latin America.
All our products are tested in the leading hospitals; scientific, research and
medical institutes of Russia.
Our company has an a certificate of quality management system in
accordance with ISO 13485:2003 for the following scope: Design,
development, manufacture, maintenance, sales and distribution of patient
monitoring equipment, ECG equipment and spiromerets.
Our main contracts for the last years:
•We have supplied 3408 pcs. monitors MITAR 01-"R-D" and 6120 pcs. ECG
Machines on the program of modernization of health of Russian Federation.
•We have supplied 3164 pcs. 1/3 channel ECG machines EC3T- “R-D” and
about 600 pcs. monitor MITAR 01-"R-D" for ambulances under national
project of Russian government “Health”.
•In 2000-2009 years we have supplied about 2000 pcs. ECG machines For
Military Ministry of Russia.
•In 2006-2012 the regular supplies of ECG Machines and patient monitors
on government projects in Uzbekistan, Turkey, Indonesia and others.
•In 2009 we have equipped cardiovascular and prenatal medical centers
and supplied our health evaluation complexes for the national wellness
program.
•Export is about 20%
MISSION OF COMPANY
To carry out development, production, realization and introduction in
practice the competitive methods and technologies for diagnostics and
monitoring of person’s health level, allowing to provide the most
effective treatment and health preservation as it is possible for lager
number of people around the world.
Quality Policy
The company has determined as a basic activity in quality policy the permanent growth of quality
effectiveness, medical equipment quality by using the achievements of science and technologies
meeting the requirements of the European Instruction Directive 93/42 EES and medical low of
Russian Federation .
The major purposes in the field of quality:
• Improvement the company’s economic position by upgrading the quality of products and arising
volumes of sales;
•Optimization of pricing and expansion the Russian and foreign markets;
•Improvement the product’s quality by using quality system ISO13485;
•Expansion to the markets of the counties requested CE mark availability;
•Improvement the products quality to the level of Europe producers;
•Satisfaction the requirements of all kind of consumers : from the doctor of private medicine to the
leading medical centers of the country.
• Systematic carrying out the new developments for the purpose of product range expansion.
Our partner – company Covidien is part of the local fabric of the communities which
operating around the world. Company success is made possible through the dedication
of 41,000 employees, nearly two-thirds of whom work in 53 manufacturing facilities
located in 16 countries. Every day, over 5,000 Covidien sales representatives meet the
needs of customers in more than 65 countries. In all, Company derives over 45% of its
sales from outside the United States.
Over the years, Covidien have pioneered a number of medical advances, including
contrast media delivery, pulse oximetry, electrosurgery, surgical stapling, laparoscopic
instrumentation and embolization devices. This extensive product line, spanning
medical devices, pharmaceuticals and medical supplies, enables to serve healthcare
needs in hospitals, long-term care and alternate care facilities, doctors’ offices,
pharmacies and in the home.
Our company use the following production of Covidien:
- BIS modules for measurement the anesthesia level
Our partner – company Masimo Sweden AB (Phasein) develops, markets and
manufactures ultra-compact mainstream and sidestream multigas analyzers, which can
be integrated into patient monitors, anesthesia delivery systems and ventilators.
Masimo Sweden AB’s products shall be available as stand-alone “plug-in and measure”
analyzers and as easy to integrate build-in modules. Masimo Sweden AB ’s products
shall be designed using the latest advances in component and microprocessor
technology for optimal convenience, mobility and ease of integration.
PHASEIN’s vision is to become the partner of choice for those requiring a mobile and
flexible solution for measuring respiratory gases in any clinical application.
Our company use the following production of Masimo Sweden AB :
- Mainstream and sidestream gas analyzers
Our partner – company Vitalograph Ltd. was founded in 1963, building on a successful
business in respiratory diagnostic and therapeutic products started in 1951.
Vitalograph achieved its early success by taking spirometry from a complex laboratory
test to a simple effective screening procedure - with the key benefit of providing early
detection, and therefore more effective treatment.
Vitalograph designs, manufactures and markets respiratory diagnostic and therapeutic
products and is recognised world wide for excellent lung function testing equipment
and related services.
Vitalograph is represented in 113 countries through Authorised Distributors who are
trained to provide a high standard of product sales and support, with ready back up
when needed from the UK.
Our company use the following production of Vitalograph Ltd:
- The flow sensor for digital spirometer SMP21/01-”R-D”
Our partner – company TreyMed was incorporated in 1996 with the mission to design
and manufacture intelligent and affordable respiratory monitoring sensors and
devices. TreyMed has designed its own proprietary, patented sensor systems which
are available as OEM components, and offer complete monitors which utilize these
sensors. TreyMed manufactures sensors for two basic areas of respiratory care: gas
analysis and airway flow/pressure. From these basic measurements, many parameters
related to a patient's cardiovascular and respiratory health can be calculated.
TreyMed has grown to become a leading supplier of respiratory care products around
the world. Company successfully competes for OEM business by providing excellent
quality products at lower cost with faster technical support and service.
Our company use the following production of TreyMed :
- CO2 sensors
Our partner – company Shenzhen Med-link Electronics Tech Co.,Ltd works in the field
of professional development, production and marketing of medical equipment,
accessories and supplies. Products widely used in monitoring, oximetry, ECG, Holter
ECG, EEG, a B-ultrasonic fetal supervisor equipment, complete product specifications,
and compatible with the majority of imported and domestic models.
Products based on the latest international standard production with non-toxic, durable,
comfortable and interference characteristics, and has made well-known professional
certification of CE, SFDA certification.
Long, the company focus on the introduction of professionals and training, has formed
a research and development, management, manufacturing of high-quality and
professional team that will enable us to meet or exceed customer requirements. Best-
selling products in the CE, FDA, the SFDA market within the region, agents around the
world nearly 60 countries.
Our company use the following production of Med-link Electronics Tech Co.,Ltd:
- SPO2 and Temperature Sensors, extension cables, disposable BP cuffs
Our partner – company B Braun supplies the global healthcare market with products for
anesthesia, intensive medicine, cardiology, extra corporeal blood treatment and
surgery, as well as services for hospitals, general practitioners and the homecare
sector.
Through dialogue with those who are using B. Braun's products on a daily basis, the
company is continually gaining new knowledge which it incorporates into product
development. In this way, the company contributes with innovative products and
services towards optimizing working procedures in hospitals and medical practices all
over the world and improving safety – for patients, doctors and nursing staff.
With approximately 44,000 employees in more than 50 countries, B. Braun achieved a
turnover in 2011 of 4.6 billion Euros.
Our company use the following production of B Braun :
-thermodilution catheters;
-thermosensors;
-devices for invasive monitoring;
- devices for infusion flows.
Our partner – company BD is a medical technology company that serves healthcare
institutions, life science researchers, clinical laboratories, industry and the general
public. BD manufactures and sells a broad range of medical supplies, devices,
laboratory equipment and diagnostic products. BD is headquartered in the United
States and has offices in more than 50 countries worldwide.
BD Medical is among the world's leading suppliers of medical devices and a leading
innovator in injection- and infusion-based drug delivery since 1906, when the Company
built the first-ever facility in the U.S. to manufacture needles and syringes. The BD
Medical segment is focused on providing innovative solutions to reduce the spread of
infection, enhance diabetes treatment and advance drug delivery.
Our company use the following production of B Braun :
-thermodilution catheters;
-thermosensors;
-kits for cardiac output measuring.
Our partner – Fujitsu is the leading Japanese information and communication
technology (ICT) company offering a full range of technology products, solutions and
services. Over 170,000 Fujitsu people support customers in more than 100 countries.
Fujitsu uses experience and the power of ICT to shape the future of society with the
customers. Fujitsu Limited (TSE:6702) reported consolidated revenues of 4.5 trillion yen
(US$54 billion) for the fiscal year ended March 31, 2012.
Fujitsu uses field Innovation to find new approaches and the inspiration to improve
ourselves, while delivering added value to the customers, provides global
environmental solutions in all business areas and works together to accelerate global
business expansion.
Our company use the following production of Fujitsu:
- thermoprinters for ECG machines.
It is equipped with the 3-4-6-12 ECG channels colored
TFT display with LED backlight
ECG Machine EC12T-01-”R-D” with colored display
• ECG Machine provides
patient’s ECG measurement in
the system of twelve common
used leads, Cabrera and Frank
leads, Nebh 3 leads,
Main features:
•TFT display allows watching 3 ,4, 6 or 12
ECG leads simultaneously and print them in
the same scale on thermal printer;
•Possibility of remote receiving and
conducting ECG analyze using GSM module
and the Internet.
• “ECG Analysis” Mode;
•Full syndromal diagnostics (271 reports);
•Possibility to print 12 ECG leads and ECG
protocol on external laser printer;
•Trials mode - observation period up to 3
hours, printing interval from 1 to 90 min;
•Possibility to record ECG in manual mode
with any electrodes number;
•“Hot” keys for the quick access to
important functions;
•Alphanumeric keyboard;
•Set up of parameters for every user (10
define user profiles).
One of the main features of EC12T
is the availability of “HOT” keys for
quick access to important functions
and easy-to-use knob
You can print ECG leads on thermal printer in the same scale as they are reflecting on
LCD display
Simultaneous recording
of 3 ECG leads on Z-fold
thermal paper
You can print ECG leads on thermal printer in the same scale as they are reflecting on
LCD display
Simultaneous
recording
of 3 ECG leads
+1 rhythm lead on roll
thermal paper
You can print ECG leads on thermal printer in the same scale as they are reflecting on
LCD display
Simultaneous
recording
of 6 ECG leads
on Z-fold thermal
paper
You can print ECG leads on thermal printer in the same scale as they are reflecting on
LCD display
Simultaneous recording
of 6 ECG leads
on roll thermal paper
There is an automatic rhythm printing on arrhythmia
One lead rhythm printing with
sweep speed 5 mm/sec.
There is an automatic rhythm printing on arrhythmia
Three leads rhythm printing with
sweep speed 10 mm/sec.
In EC12T there is a possibility to connect external memory (Flash card), external
keyboard and laser printer for simultaneous printing of 12 leads on A4 paper
format via USB-А port.
Internal flash memory allows to use EC12T in bed wards without ECG printing and
then via internal flash memory transfer the data to PC for the analysis and
archiving. It allows to use several ECG machines with one PC.
Wireless data transfer via bluetooth serial adapter to PC.
ECG printout to
the external
laser printer with
simultaneous
printing of 12
ECG leads on
the A4 format
paper
ECG Machine EC12T-01-”R-D” with 63 mm TFT display
•ECG Machine provides patient’s
ECG measurement in the system of
twelve common used leads, Cabrera
and Frank leads, Nebh 3 leads;
•LCD display allows to watch any of
12 ECG leads;
•ECG Analysis Mode;
•RR gram mode;
•Possibility to work as a part of
stress-test system;
•Internal memory with possibility of
ECG fragments printing.
•Possibility to work with different
groups of patients (adult, children).
Features of ECG Machine
EC12T-01 – “R-D”
•Simultaneous printing of 3, 4, 6 ECG
leads along and 12 ECG leads across the
paper;
•Possibility to set up half amplification for
chest leads;
•Registration of average ECG complex
with peak marks;
•Paper speed 10, 25 and 50 mm/sec;
•Trials mode - observation period up to 3
hours, printing interval from 1 to 90 min;
• RR gram printing up to 10 hours;
•Automatic start if arrhythmia emerge;
•Printing the reports about electrical axis
of heart position, ST segment deviation,
amplitude-time characteristics of QRS
complexes;
•Automatic ECG characteristic
measurement on every ECG lead;
•Weight not more than 2 kg.
ECG Machine EC12T-01-“R-D” with software it is unique combination of technical
features of ordinary and computer ECG Machines
Software provides the following
functions: •Registration into PC memory and reflecting
on PC screen standard ECG signals;
•Forming and managing the archives of ECG
signals;
•Forming the averaged P-QRS-T complexes;
•Measurement of amplitude-to-time
characteristics of ECG intervals and peaks;
•Calculation of standard ECG characteristics;
•Sindromal interpretation of ECG pathologic
changes with preliminary diagnosis;
•Possibility to edit the medical report.
USAGE:
- Electrocardio
diagnosis;
-Intensive care units;
-Ambulance;
-Private physicians
ECG Machine EC3T-01-”R-D”
EC3T is designed to register and measure heart bioelectric potentials
for electrocardiographic examinations. EC3T is designed to be used
in functional diagnostics offices (ECG offices) of out-patient clinics,
hospitals, coronary care units and critical care units of hospitals, as
well as in emergency cars and other medical establishments.
Features of ECG Machine
EC12T-01 – “R-D”
•Simultaneous printing of 1, 2, 3 ECG
leads;
•Possibility to set up half amplification for
chest leads;
•Registration of average ECG complex
with peak marks;
•LCD display allows to watch ECG curve;
•Paper speed 10, 25 and 50 mm/sec;
•Trials mode - observation period up to 3
hours, printing interval from 1 to 90 min;
•RR gram printing up to 10 hours;
•Automatic start if arrhythmia emerge;
•Printing the reports about electrical axis
of heart position, ST segment deviation,
amplitude-time characteristics of QRS
complexes;
•Automatic ECG characteristic
measurement on every ECG lead;
•Weight not more than 2 kg.
Interactive system of ECG data transfer via e-mail:
•Scientific and technical progress in the field of computer
technology and the Internet allows to refuse from system of
ECG transfer by a phone in favor of Internet use;
•Introduction of similar system not only at the all-Russian and
regional level, but also at the level of the rural medical
assistant's and obstetric centers will allow to provide ECG
recording and receiving by e-mail the qualified medical
conclusions;
•There is no need of patients and specialists to go to the
district center to record ECG;
• Compatible for each point of system and affordable software
will allow to make ECG analysis in any point of a system;
•You can choose any of ECG machines produced by Monitor
LTD;
•Possibility to use laptop or PC;
•Choose dimensions, the prices and possibilities!
Possibility to use ECG
machine EC12T in the
stress-test system
Trademeal Valiant (Lode) Bicycle ergometer Corival
Digital spirometer SMP/21-01-”R-D”
36 parameters of pulmonary
ventilation on expiration and
inspiration and making a spirometry
results report.
• Test of VC and forced expiration
• “Maximal flow-volume loop” test
•Test of minute tidal volume
•Test of maximal voluntary
ventilation
•Post medication test
Digital spirometer SMP/21-01-”R-D”
Purpose of use:
State of lungs diagnosis;
State of lungs monitoring;
Population's health evaluation while
carrying out the mass examination.
Digital spirometer SMP/21-01-”R-D” provides the following functions: -Measuring of 4 VC parameters, 19 FVC parameters, 26 “flow-volume loop” parameters, 7 MTV parameters and 3 MVV
parameters;
-Predicted values calculation for lung volumes and peak expiratory flow characteristics for adult and children on
Klement/Shiryaeva, ITS, ECCS, KNUDSO N standards;
-Evaluation of parameters on Russian and ATS methods;
-Dispaying measurement results on colored TFT display;
-Printing a spirometry results report on built in thermoprinter;
-Printing a spirometry results report via USB port on external laser printer;
-Post medication test;
-Work from built in battery;
-Keeping patient data in memory;
-Possibility to use the device both in stationary and in ambulatory conditions.
- Easy knob to operate the device
Monitor MITAR 01-”R-D”
with colored display 10,4”
16 kinds of models depending on measurement
characteristics
Three in one: Stationary, portable, mobile USAGE: Intensive care units of hospitals and ambulances
Monitor MITAR 01-”R-D”
with colored display 12,1
-ECG and HR
-Respiration
-SpO2 and Photoplethysmogram
-NIBP and up to 4 channels of IBP
-2 channels of Temperature
-СО2 and Capnogram
-Cardiac Output
-Multigas
-BIS
16 kinds of models depending on
measurement characteristics
Three in one:
Stationary ( 10,4 or 12,1” display)
Portable (ergonomic hand grip and battery power
supply)
Mobile (automobile constant power supply, easy
fits on a standard hospital bed-rail)
Number of graphic channels from 2 to 9
Touch screen or easy knob to operate
- ECG 3 leads;
- ECG 7,8 or 12 leads (option)
- HR by impedance,
capnographic or thermistor
methods;
Combining of possibility to use up to 10
standard forms with possibility of their
individual setup (number of
simultaneous reflecting channels from
1 to 9, trends, alarm limits and modules
configuration)
Possibility of reflecting vital
functions near the short
trends and possibility to
freeze all curves or 2/3 of the
display
Possibility of reflecting
graphic or tabular trends in
any graphic zone
Possibility of bed-to-bed
preview
Possibility of wired and
wireless (WiFi) connection of
monitors and the central
monitoring station
Oxycardiorespirogramm
•Simultaneous reflecting
of 12 ECG leads with 10
electrode cable;
•Possibility of synthesis of
12 ECG leads with 5
electrode cable;
•Oxycardiorespirogramm
MULTI -GAS monitoring using
IRMA probe (PHASEIN)
Et CO2 и Ins CO2,
Et O2 и Ins O2,
V2O,
HAL,
ISO,
SEV,
DES,
ENF
Possibility of printing any vital
function (up to 3 channels),
digital data and trends on built
in thermo printer with print
width 57 mm,
Big digits mode
- During working with IRMA
CO2 probe in that mode the
concentration of monitoring
gases is reflecting on the
display
- Full recording of
monitoring information on
SD card
Accessories and cables
Possibility of measuring NIBP in
manual and automatic modes
and automatic switch on of NIBP
measurement if PWTT range is
exceeded
MENU «PATIENT»
-Possibility to data
output to central
monitoring station;
-Possibility to switch
off unusable modules
- Drugs calculators,
haemodynamics,
oxygenation,
ventilation and renal
function
SpO2 accessories used in
monitor MITAR-01-”R-D”:
- Pediatric silicone soft
sensor;
- Pediatric and adult finger
clip sensor;
- Adult silicone soft sensor;
- Disposable neonatal
silicone soft sensor
Temperature accessories
used in monitor MITAR-
01-”R-D”:
- Adult reusable Skin-Surface
Temp Probe;
- Children reusable Skin-Surface
Temp Probe;
- Adult reusable
Esophageal/Rectal Temp Probe;
- Children reusable
Esophageal/Rectal Temp Probe.
Monitor MITAR-01-”R-D” delivery set may contain 3,5, 6 or 10 leads ECG cables
6 leads ECG cables
10 leads ECG cables
There is a possibility to use BIS technology in monitor
Mitar-01-”R-D”. BIS technology can help clarify the
distinction between brain and spinal cord responses,
enabling clinicians to manage anesthetic goals of
hypnosis, analgesia and immobility.
· Because BIS technology measures electrical
activity in the brain, it provides a direct correlation with
depth of consciousness (hypnosis).
· BIS technology enables you to assess
consciousness and sedation independent of
cardiovascular reactivity.
How BIS Technology Works:
· Raw EEG data are obtained through a sensor
placed on the patient’s forehead.
· The BIS™ system processes the EEG information
and calculates a number between 0 and 100 that provides
a direct measure of the patient’s level of consciousness.
· A BIS™ monitoring value of 100 indicates the
patient is fully awake.
· A BIS monitoring value of 0 indicates the absence
of brain activity.