SPARES AND ACCESSORIESMetco stocks Australia’s largest range of high pressure tools and accessories from Industry leading names like JETSTREAM, AQUAJET STONEAGE, and TERRYDON.

We always strive to go the extra mile to ensure our clients get what they need as soon as possible and our experienced customer service team will ensure that your enquiry is professionally managed so you get high performance outcomes and value for money.

OUR PEOPLEOne of our key strengths is our people.

Our ability to solve problems, provide advice on equipment selection, application advice and on-site training comes from years of hands-on experience in the water-blasting industry. We understand the demands and expectations.

Our primary focus during design and manufacture, through to after sales service, is to help our clients optimise productivity when they use our equipment.

SPECIALISING IN THE DESIGN, MANUFACTURE, HIRE AND SALES OF WORLD CLASS HIGH PRESSURE WATER BLASTING PUMPS, HYDRODEMOLITION ROBOTS, MOWERS, SPARES AND ACCESSORIES THROUGHOUT AUSTRALIA AND NEW ZEALAND

HEAD OFFICE151-153 William Street, Beverley, Adelaide South Australia 5009T. 08 8297 2011 F. 08 8371 2610 E. sales@metco.com.auwww.metco.com.au

A600, A325 & A150 The design intent from the beginning was to offer an Australian, quality built, high pressure pump that had all of the performance and safety features required by the modern contractor whilst being efficient, simple to operate and easy to maintain. The Metco range of machines (HP and UHP water pumps, hydrodemolition robots, tools and equipment) fulfills that design brief with the solid performance and flexibility to optimise productivity hour after hour, day after day.

Metco high pressure pumps utilise the Jetsream UNx range of fluid ends which outclass rivals for ease of service and quick change over when required. Available in 15K, 20K & 40K PSI (1034, 1378 & 2757 bar).

600HP Volvo Diesel, 325HP or 150HP Cummins Diesel power plants, coupled to a super heavy duty auto clutch (A325 only) and soft coupling, provide smooth and safe operation. 600HP available with 15K, 20K PSI (1034, 1378 bar).

PRODUCTS METCO RENTALS

SAFETY• Built to comply with Australian/NZ Standards

• Controller and remote E Stop for immediate shut down in case of emergency

• Dual rupture disc assemblies

• All moving parts fully guarded

• Insulated exhaust system

• Lock out isolators

• Multiple tie-down points for transport

• Fork-lift pockets

• Optional single point lift

OPERATION• Fluid end conversion 15K, 20K and 40K PSI

(1034, 1378 & 2757 bar)

• Ease of service and fluid end changeover means less down-time

• Comprehensive shutdown systems - low water; low fuel; dirty water filter; engine fault; out of level (pump)

GENERAL• 8mm wall section hot dip galvanized and

bunded base to prevent spillage to ground

• Optional roof

• Able to be supplied fully enclosed in an insulated shipping container

Metco has Australia's most advanced and up to date range of High Pressure Water Blasting Pumps and Aqua-Jet Hydro-Demolition Robots. We can tailor a solution to suit your requirements for short or long term hire, anywhere in Australia.

Coupled with our extensive range of spares and accessories, expert industry application advice and training, Metco has your water blasting and aqua-cutting needs covered.

Units available in the range include 150HP, 325HP and 600HP at 15K, 20K, and 40K PSI (1034, 1378 & 2757 bar).

Metco will provide you with the best quality equipment, service and training including:

• Water-blast HP and UHP Pumps and equipment

• Hydrodemolition robots and mowers

• Same day Shipments for spares and consumables

• Accessories and safety equipment

• 24/7 Tech Support

• 'Right Start Program' (initial start-up training)

• UNx Fluid end-Conversions for quick change-overs

www.metco.com.au

ABOUT USMetco specialises in the design, manufacture, hire and sale of world class high pressure water blasting machines, hydrodemolition robots, mowers and high pressure tools, spares and accessories for the:

• Concrete hydrodemolition / repairs• Infrastructure maintenance• Construction• Mining• Industrial, marine and

general industry sectors.

With clients throughout Australia, New Zealand, PNG, Fiji and the Solomon Islands, our dedication and reputation for providing expert advice focused on solutions, has resulted in a loyal client base which spans a broad industry cross section.

Our designs focus on the owner and the operator with safety, reliability and serviceability being carefully considered at every, step of the process.

A600, A325 & A150 The design intent from the beginning was to offer an Australian, quality built, high pressure pump that had all of the performance and safety features required by the modern contractor whilst being efficient, simple to operate and easy to maintain. The Metco range of machines (HP and UHP water pumps, hydrodemolition robots, tools and equipment) fulfills that design brief with the solid performance and flexibility to optimise productivity hour after hour, day after day.

Metco high pressure pumps utilise the Jetsream UNx range of fluid ends which outclass rivals for ease of service and quick change over when required. Available in 15K, 20K & 40K PSI (1034, 1378 & 2757 bar).

600HP Volvo Diesel, 325HP or 150HP Cummins Diesel power plants, coupled to a super heavy duty auto clutch (A325 only) and soft coupling, provide smooth and safe operation. 600HP available with 15K, 20K PSI (1034, 1378 bar).

PRODUCTS METCO RENTALS

SAFETY• Built to comply with Australian/NZ Standards

• Controller and remote E Stop for immediate shut down in case of emergency

• Dual rupture disc assemblies

• All moving parts fully guarded

• Insulated exhaust system

• Lock out isolators

• Multiple tie-down points for transport

• Fork-lift pockets

• Optional single point lift

OPERATION• Fluid end conversion 15K, 20K and 40K PSI

(1034, 1378 & 2757 bar)

• Ease of service and fluid end changeover means less down-time

• Comprehensive shutdown systems - low water; low fuel; dirty water filter; engine fault; out of level (pump)

GENERAL• 8mm wall section hot dip galvanized and

bunded base to prevent spillage to ground

• Optional roof

• Able to be supplied fully enclosed in an insulated shipping container

Metco has Australia's most advanced and up to date range of High Pressure Water Blasting Pumps and Aqua-Jet Hydro-Demolition Robots. We can tailor a solution to suit your requirements for short or long term hire, anywhere in Australia.

Coupled with our extensive range of spares and accessories, expert industry application advice and training, Metco has your water blasting and aqua-cutting needs covered.

Units available in the range include 150HP, 325HP and 600HP at 15K, 20K, and 40K PSI (1034, 1378 & 2757 bar).

Metco will provide you with the best quality equipment, service and training including:

• Water-blast HP and UHP Pumps and equipment

• Hydrodemolition robots and mowers

• Same day Shipments for spares and consumables

• Accessories and safety equipment

• 24/7 Tech Support

• 'Right Start Program' (initial start-up training)

• UNx Fluid end-Conversions for quick change-overs

www.metco.com.au

ABOUT USMetco specialises in the design, manufacture, hire and sale of world class high pressure water blasting machines, hydrodemolition robots, mowers and high pressure tools, spares and accessories for the:

• Concrete hydrodemolition / repairs• Infrastructure maintenance• Construction• Mining• Industrial, marine and

general industry sectors.

With clients throughout Australia, New Zealand, PNG, Fiji and the Solomon Islands, our dedication and reputation for providing expert advice focused on solutions, has resulted in a loyal client base which spans a broad industry cross section.

Our designs focus on the owner and the operator with safety, reliability and serviceability being carefully considered at every, step of the process.

A600, A325 & A150 The design intent from the beginning was to offer an Australian, quality built, high pressure pump that had all of the performance and safety features required by the modern contractor whilst being efficient, simple to operate and easy to maintain. The Metco range of machines (HP and UHP water pumps, hydrodemolition robots, tools and equipment) fulfills that design brief with the solid performance and flexibility to optimise productivity hour after hour, day after day.

Metco high pressure pumps utilise the Jetsream UNx range of fluid ends which outclass rivals for ease of service and quick change over when required. Available in 15K, 20K & 40K PSI (1034, 1378 & 2757 bar).

600HP Volvo Diesel, 325HP or 150HP Cummins Diesel power plants, coupled to a super heavy duty auto clutch (A325 only) and soft coupling, provide smooth and safe operation. 600HP available with 15K, 20K PSI (1034, 1378 bar).

PRODUCTS METCO RENTALS

SAFETY• Built to comply with Australian/NZ Standards

• Controller and remote E Stop for immediate shut down in case of emergency

• Dual rupture disc assemblies

• All moving parts fully guarded

• Insulated exhaust system

• Lock out isolators

• Multiple tie-down points for transport

• Fork-lift pockets

• Optional single point lift

OPERATION• Fluid end conversion 15K, 20K and 40K PSI

(1034, 1378 & 2757 bar)

• Ease of service and fluid end changeover means less down-time

• Comprehensive shutdown systems - low water; low fuel; dirty water filter; engine fault; out of level (pump)

GENERAL• 8mm wall section hot dip galvanized and

bunded base to prevent spillage to ground

• Optional roof

• Able to be supplied fully enclosed in an insulated shipping container

Metco has Australia's most advanced and up to date range of High Pressure Water Blasting Pumps and Aqua-Jet Hydro-Demolition Robots. We can tailor a solution to suit your requirements for short or long term hire, anywhere in Australia.

Coupled with our extensive range of spares and accessories, expert industry application advice and training, Metco has your water blasting and aqua-cutting needs covered.

Units available in the range include 150HP, 325HP and 600HP at 15K, 20K, and 40K PSI (1034, 1378 & 2757 bar).

Metco will provide you with the best quality equipment, service and training including:

• Water-blast HP and UHP Pumps and equipment

• Hydrodemolition robots and mowers

• Same day Shipments for spares and consumables

• Accessories and safety equipment

• 24/7 Tech Support

• 'Right Start Program' (initial start-up training)

• UNx Fluid end-Conversions for quick change-overs

www.metco.com.au

ABOUT USMetco specialises in the design, manufacture, hire and sale of world class high pressure water blasting machines, hydrodemolition robots, mowers and high pressure tools, spares and accessories for the:

• Concrete hydrodemolition / repairs• Infrastructure maintenance• Construction• Mining• Industrial, marine and

general industry sectors.

With clients throughout Australia, New Zealand, PNG, Fiji and the Solomon Islands, our dedication and reputation for providing expert advice focused on solutions, has resulted in a loyal client base which spans a broad industry cross section.

Our designs focus on the owner and the operator with safety, reliability and serviceability being carefully considered at every, step of the process.

SPARES AND ACCESSORIESMetco stocks Australia’s largest range of high pressure tools and accessories from Industry leading names like JETSTREAM, AQUAJET STONEAGE, and TERRYDON.

We always strive to go the extra mile to ensure our clients get what they need as soon as possible and our experienced customer service team will ensure that your enquiry is professionally managed so you get high performance outcomes and value for money.

OUR PEOPLEOne of our key strengths is our people.

Our ability to solve problems, provide advice on equipment selection, application advice and on-site training comes from years of hands-on experience in the water-blasting industry. We understand the demands and expectations.

Our primary focus during design and manufacture, through to after sales service, is to help our clients optimise productivity when they use our equipment.

SPECIALISING IN THE DESIGN, MANUFACTURE, HIRE AND SALES OF WORLD CLASS HIGH PRESSURE WATER BLASTING PUMPS, HYDRODEMOLITION ROBOTS, MOWERS, SPARES AND ACCESSORIES THROUGHOUT AUSTRALIA AND NEW ZEALAND

HEAD OFFICE151-153 William Street, Beverley, Adelaide South Australia 5009T. 08 8297 2011 F. 08 8371 2610 E. sales@metco.com.auwww.metco.com.au

SPARES AND ACCESSORIESMetco stocks Australia’s largest range of high pressure tools and accessories from Industry leading names like JETSTREAM, AQUAJET STONEAGE, and TERRYDON.

We always strive to go the extra mile to ensure our clients get what they need as soon as possible and our experienced customer service team will ensure that your enquiry is professionally managed so you get high performance outcomes and value for money.

OUR PEOPLEOne of our key strengths is our people.

Our ability to solve problems, provide advice on equipment selection, application advice and on-site training comes from years of hands-on experience in the water-blasting industry. We understand the demands and expectations.

Our primary focus during design and manufacture, through to after sales service, is to help our clients optimise productivity when they use our equipment.

SPECIALISING IN THE DESIGN, MANUFACTURE, HIRE AND SALES OF WORLD CLASS HIGH PRESSURE WATER BLASTING PUMPS, HYDRODEMOLITION ROBOTS, MOWERS, SPARES AND ACCESSORIES THROUGHOUT AUSTRALIA AND NEW ZEALAND

HEAD OFFICE151-153 William Street, Beverley, Adelaide South Australia 5009T. 08 8297 2011 F. 08 8371 2610 E. sales@metco.com.auwww.metco.com.au