OUR LOCATIONS - Solmax...waste containment solutions. The use of geosynthetic products help to keep...
Transcript of OUR LOCATIONS - Solmax...waste containment solutions. The use of geosynthetic products help to keep...
SOLMAX.COM
WASTEMANAGEMENT
OURLOCATIONS
HEADQUARTERVARENNES, QC | CANADA
Solmax is not a design professional and has not performed any design services to determine if Solmax’s goods comply with any project plans or specifications, or with the application or use of Solmax’s goods to any particular system, project, purpose, installation or specification.
2
PROTECTING THE ENVIRONMENT FROM WASTE
Waste is an ever evolving by-product of human and industrialization activity. A growing world population and economy, new technologies, new forms of waste, increasing volumes and regulatory pressure have created challenges and opportunities for effective waste management.
THE WORLD BANK CONSERVATIVELY ESTIMATES CURRENT GLOBAL WASTE GENERATION AT 2.2 BILLION
TONS BY 2025
THIS IS EXPECTED TO INCREASE TO APPROXIMATELY
1.3 BILLION TONS PER YEAR OF MUNICIPAL SOLID WASTE ALONE
3
The regulated use of geomembranes for waste
containment is increasingly becoming mandatory
in both developed and developing countries.
Waste management aims to conserve natural
resources and manage waste in an environmentally
sound manner. Effective management of waste
includes prevention, recovery, re-use, recycling
and disposal. More importantly this requires a
strategic approach to the design and build of
disposal facilities.
To do so, you need a partner with the right
products and solutions that you can rely on and
an expert you can trust. Solmax’s geosynthetic
products and cover solutions are used in more
regions around the world for well over 40 years.
Our experience and reach give us a clear
competitive advantage, allowing you to have
peace of mind that your waste management
efforts are not only compliant with new waste
disposal laws and government regulations but
also contributes to building a sustainable future.
Solmax products are approved for use in various classes of landfills and landfill applications by national authorities around the world (e.g., BAM, Asqual).
4
LaNdfILLCEll
Municipal waste
Hazardous waste
industrial waste
Modern landfills are highly engineered, the safest
and most economical solution for managing
municipal waste. Specifically designed to prevent
contamination of the environment, they are usually
constructed out of numerous dimensional layers of
geosynthetics and soil layers, each performing
a specific function within the containment area.
The main requirement for a municipal solid waste
landfill is that it does not pollute, contaminate or
degrade its environment.
Corrosive, flammable, reactive and poisonous
materials have to be contained in specialized facilities
to prevent them from damaging the environment.
As such, most industrialized countries have developed
regulations to dispose of these materials in a
secured landfill cell that is designed with
double-lining system, which is now the
standard in most countries.
Industrial activities produce a significant amount
of waste and while efforts are increasing to reuse
and recycle material a large quantity still requires
properly managed waste disposal. Our broad range
of geomembranes and GCLs will support you in
developing cost-effective long-term containment
solutions.
Our high-density polyethylene (HDPE)
geomembranes are engineered to withstand
deterioration with proven durability for long term
use in both buried and UV exposed conditions,
preventing leakage into groundwater, and
providing stability on steep slopes.
Our geosynthetic clay liners (GCLs) are installed
below the geomembrane to form a composite
barrier system with superior hydraulic barrier
performance.
Our engineered and high-performance geomembrane
and GCL solutions, combined with effective drainage
geocomposites, provide a pivotal function for an
effective double-lining system design. This creates
an impermeable barrier lining system at the base
of the facility to prevent hazardous waste and
high concentrated leachate from getting into the
environment.
Waste from factories, construction sites, manufacturing
plants and other industries require specialized
waste containment solutions.
The use of geosynthetic products help to keep your
waste disposal facility compliant with health, safety
and legal requirements
5
6
landfill capping
leacHatecontainMent
Major long-term concerns when capping
landfills include the differential settlement due
to biodegradability of the waste, slope stability
and surface erosion of the soil layer. The cap and
its foundation needs careful design and choice of
barrier systems.
In a landfill cap a geosynthetic liner system
represents a small fraction of the overall cost
but virtually 100% of the protection.
Our geosynthetic solutions have been proven to
perform a multitude of functions concurrently.
From accommodating differential settlement, gas
venting and gas collection, to keeping moisture
from entering the waste containment.
GCLs are ideally suited for use in landfill caps and
closures. Used alone or in conjunction with a linear
low-density polyethylene (LLDPE) geomembrane it
provides excellent resistance to the deleterious effects
of differential settlements and seasonal temperature
fluctuations.
Covered caps need significant design considerations
and maintenance to avoid erosion of the cover.
Those issues are eliminated with the fully anchored
and fully synthetic grass capping system.
Leachate is generated when excess water passes
through waste, dissolving soluble substances.
Landfill leachate collection is necessary to reduce
leachate buildup in the cell. Containment and
treatment of this leachate is therefore a key
component of waste management to prevent
contamination of the environment.
Geosynthetics can be utilized to create safe and cost
effective barrier solutions. GCLs act as secondary or
tertiary barrier, while leak detection geomembranes
are used as primary and secondary barriers.
Leak detection can happen at any time when
these geomembranes are combined with drainage
geocomposites, addressing even the highest
environmental concerns.
7
reMediation
Abandoned landfills are a growing environmental
concern as many of these were not operated
with today’s regulatory standards. Capping and
remediating abandoned landfills present
opportunities for beneficial reuse.
While remediation of these sites present a huge
geotechnical challenge, capping and vertical
barrier systems offer opportunities to address
issues of erosion, gas migration and groundwater
protection.
8
WaSTE MaNaGEMENT SOlUTIONS
wHite reflective finisH
White Reflective Finish helps to keep the liner cooler, resulting in fewer
wrinkles. Fewer wrinkles mean easier installation of cover soil and
increasing the lifespan of the liner.
leak location finisH
Leak Location Finish is essential where you can‘t afford a leak. It is the most
cost-efficient and reliable leak detection method in the industry, improving
damage detection in both exposed and covered landfill applications, even
after installation.
lldpe series
LLDPE Series is a linear low-density polyethylene geomembrane that exceeds
the requirements of international and local specification standards for LLDPE
geomembrane liners. The flexibility and elongation performance of this series
of liners are the perfect solution for landfill cell cover design.
Hdpe series
HDPE Series is a high-density polyethylene geomembrane that exceeds
the requirements of the international and local specification standards
for HDPE geomembrane liners. This series of geomembrane liners offers
proven performance as primary containment barrier in landfill applications.
9
vertical barrier
Vertical barrier wall systems are designed to block lateral migration of
subsurface fluids to allow for containment, exclusion, treatment or removal
of groundwater seepage and hazardous gases. CurtainWall is the choice
for trenched applications, while GundWall‘s interlocking system is ideal
for trenchless applications.
liteearth™
LiteEarth™ capping system is an aesthetically pleasing monolithic
geosynthetic system that eliminates the need for soil cover and reduces
the risk of erosion from wind or water.
drainage geocoMposites and geonets
Our broad range of geosynthetic drainage geocomposites and geonets are
tailored for landfills, transmit fluids and gases in various conditions and are
used for leak detection and collection.
gundseal®
Gundseal® is a composite liner system consisting of sodium bentonite adhered
to a polyethylene geomembrane. This acts as a barrier and provides the best
leak protection for waste containment applications.
fabric-encased gcl
BentoLiner fabric-encased geosynthetic clay liners have proven long term
creep resistance and internal shear strength properties, which make them
ideal for a wide range of containment lining and capping solutions.
10
WHY SOlMAx
setting standardsSolmax works with governments to draw up
industry regulations, collaborates with stakeholders
worldwide to raise environmental requirements, and
enhances technical designs for projects.
Groundbreaking products brought to market by
Solmax and its wholly owned companies include
the first HDPE geomembranes, textured liners,
geosynthetic clay liners (GCLs), white reflective
geomembranes, conductive geomembranes, and
high-flow and pressure-resistant drainage solutions.
Our no-compromise approach to quality and
reliability makes Solmax the brand of choice. As
we have grown, so have our capabilities. Now
represented in more regions, we have a clear
competitive advantage. It means faster deliveries
and better service for our customers, today and
tomorrow. And, with some of the smartest minds
in the business, Solmax brings products to market
which no other company can offer.
Our key objective—to enable progress by
protecting the earth—propels us forward.
With better support and solutions to protect
the ground, our customers can aim higher,
achieve more, faster.
Our strategy to build the capacity, capability,
reach, expertise, and culture to deliver innovation
rapidly and at scale, is well advanced. Our people
are motivated, united by a single vision: to set the
pace and reshape the industry.
11
Solmax has achieved ISO 14001 certification for
environmental management, and ISO 9001 for
quality assurance. Our laboratories are accredited
by the GAI-LAP (Geosynthetic Accreditation
Institute – Lab Accreditation Program), assuring
our customers that we apply the highest standards
in product testing. Solmax has also achieved BAM,
Asqual, KIWA, CE, and other certifications.
iso and industry-rated
Extensive manufacturing quality assurance (MQA)
testing is performed on our products at our labs.
Our MQA program starts with testing and
verification of specially formulated quality resins
and other raw materials and extends through
delivery to the project site.
Our standards are high. All Solmax geomembranes,
GCLs, and drainage solutions are tested for
strength and durability, and against key criteria.
Geomembranes, for example, are 100% spark
tested for pinholes during the manufacturing
process to ensure every delivered roll is leak free.
Quality assurance
SOLMAX.COM
WASTEMANAGEMENT
OURLOCATIONS
HEADQUARTERVARENNES, QC | CANADA
Solmax is not a design professional and has not performed any design services to determine if Solmax’s goods comply with any project plans or specifications, or with the application or use of Solmax’s goods to any particular system, project, purpose, installation or specification.
REV. 09.19