OUR INNOVATION YOUR PROFITABLE PRODUCTION

1 Sandvik Top Hammer Rock Drilling Tools

SANDVIK TOP HAMMER ROCK DRILLING TOOLS PRODUCT CATALOG

OUR INNOVATIONYOUR PROFITABLE PRODUCTION


ITS ALL ABOUT HEALTH AND SAFETYHelping you to ensure a safer workplace and healthier workforce is of the utmost importance to us. The wellbeing of any person coming into contact with our equipment is paramount. Therefore, we strive to identify and assess potential risk factors that could threaten your health or the health of your employees.

All of the products in this catalog are designed to meet safety requirements.

BE AWARE OF ALL SAFETY PROCEDURESWe ask that you start by obeying all instructions given. Never work under an unsupported roof or close to potential pinch point locations. Beware of the potential hazards of a loose roof and ribs, and scale down roof and ribs prior to bolting. It is important to bolt early in the mining process as soon as is safely and practically possible.

Safe work procedures should incorporate inspection before the machine operates, and also through regular monitoring based upon mining conditions, safety and hazard management systems. Workers should be provided with safety information, instruction and training on transportation, installation, operational care and disposal of drilling tools.

The mining industry continues to demand even better safety and more productivity. In order to meet these requirements, we work continuously to develop even safer products,andtoproducecomprehensivemanualsonthesafeandeffectiveuse of our products.

DRESS RIGHT FROM HEAD TO TOEYou must wear appropriate personal protective equipment (PPE) at all times. To help avoid injury, we strongly recommend:

Safety helmet Hearing protection Safety glasses Protective high visibility clothing Respiratory protection Safety boots Anysite-specificPPEasrequired

ANALYZE RISKS BEFORE YOU STARTKeep safety top of mind when planning all of your work. Before you start, always take your time to review all operations. Identify any potential risks and take appropriate measures to avoid them. If necessary, seek expert advice on how to help minimize risks. Finally, make sure that you have the right resources to perform all tasks in the safest manner possible.

PUTTING YOUR SAFETY FIRST

TAKE FIVE TO IDENTIFY HAZARDS Our Sandvik Mining Take Five app is a helpful tool to use before you start working. The app consists of a simple, stepbystep checklistwithfivequestionsthatyoushouldaskyourselftoidentifypotential hazards. The app is free to download for smartphones and tablets, both on the App Store and Google Play.


LIFTING PROCEDURESUse the correct safe lifting practices while working with heavy items. Consider your body position, the awkwardness of the item and its weight. Are two people required for the job, or is a lifting device necessary?

GRINDING OF BITSDrill bits have cemented carbide buttons. Cemented carbide is made up of tungsten carbide and cobalt. Grinding buttons can produce dust and fumes containing dangerous substances that can be inhaled or swallowed, or which can come in contact with the skin or eyes. Do not breathe the dust. Wear protective gloves, protective clothing and eye protection. In case of inadequate ventilation, wear respiratory protection. In particular, avoid dry grinding. For more information, see page 119.

ASSEMBLY OF BITS Do not touch any equipment while it is rotating. Rod rotation must be stopped before the installation or removal of a drill bit.

Follow site instructions for the isolation of rotation motors.

Beware of pinch points between the bit and the rod.

DRILLING WITH HANDHELD EQUIPMENTSandvik rock tools are designed and manufactured tothehigheststandards.Aspecifichazardexistswithhandheld drilling equipment, where if the drill rod breaks it can form an impalement hazard (if the broken drill steel protrudes from the hole it was drilling, while the driller is pushing towards it).

HOW TO WORK MORE SAFELY


DISASSEMBLY OF HOT BIT, ROD, COUPLING, SLEEVE, SHANK ADAPTER AND INTERGRAL STEEL

Ensure that products have cooled down before disassembling.

Never work on hot parts. Consider the appropriate hand protection (gloves) for the handling of warm parts.

CLEANING OF RODSA particular hazard exists with cleaning rods if the rods contain explosives. Sandvik rock tools should never beusedinaholethathasbeenfilledwithexplosives.

DEALING WITH WORN PARTSWorn parts should be removed and disposed of appropriately. Consider recycling any used drill bits. Please contact your local Sandvik representative for support and further information regarding the recycling process.

STORINGAll products should be stored in a dry place and in their original packaging until they are required for use.

GENERALThe products in this catalog are designed for drilling holes in rock, and should only be used for this purpose.


Sandvikwasfoundedin1862byGranFredrikGransson,whowasthefirstintheworldtosucceedinusing the Bessemer method for steel production on an industrial scale.

TOGETHER WE WILL TAKE YOUR BUSINESS FURTHERFor more than 150 years we have been committed to providing the highestquality products and solutions to the mining industry. Our spirit and business ethics have remained unchanged, and developments within society and the industry have contributed to our innovative solutions.

Today, we continue to conduct business in close cooperation with you and other customers all over the world, with the promise of being a proactive and innovative partner.

Webelievethatwecanmakeadifferenceinyourbottomline. You need to get the best out of your equipment with no compromise on quality, delivery time or service. As your partner, we will create solutions that help your operationrunasefficientlyaspossible.

One thing is certain: our products and solutions will continue to meet the evergrowing needs of the mining industry, and your business.

Today, the hallmark of great work is innovation and technology. Being second best is not an option for us.


CONTENTS

HANDHELD AND SMALL HOLE DRILLING 23

FACE DRILLING AND BOLTING 37

BENCH DRILLING 55

LONG-HOLEDRILLING 69

SHANK ADAPTERS 83

AUXILIARY TOOLS 99

GRINDING EQUIPMENT 103

INFORMATION AND BIT CLASSIFICATION GUIDE 119

INDEX 124

NOTES 129


THE SANDVIK GROUPSandvik was established in 1862: today, it is a global industrial group with advanced products and worldleading positions in selected areas. Our operations span 130 countries and are based on unique expertise in materials technologyandsignificantinsightintoyourprocesses.This combination has provided us with a worldleading position in three primary areas:

Tools for metal cutting in cemented carbide and highspeed steel, as well as components in cemented carbide and other hard materials.

Rock tools and equipment for the mining and construction industries.

Products in advanced stainless materials, special alloys, metallic and ceramic resistance materials and process systems.

Our goal is to actively contribute to improving your productivityand,consequently,yourprofitability.Ourproducts and services provide maximum value to you intermsofperformance,quality,speed,safety,flexibilityand not least total economy. Successful development is a result of our goaloriented investment in research,

AT YOUR SERVICE, AROUND THE WORLD

We are a leading global supplier of rock tools and equipment, service and technical solutions for the mining industry.Ourofferingcoversrockdrilling, rock cutting, rock crushing, loading and hauling and handling of materials.

development and quality assurance. We invest over 3 billion SEK annually and have more than 2,700 employees working in these areas. Many of them are specialists with advanced educational backgrounds and skills.

Our longterm and consistent strategy is based on the interaction between a number of strengths. This includes advanced and customer focused research and development activities, high valueadded products, integrated manufacturing, direct sales to customers, effectivelogisticssystems,financialstrengthandastrong corporate culture. Information technology is concentrated upon areas that enhance customer benefits,improveproductivityandstrengthenprofitability.

SANDVIK MININGWe are a leading global supplier of rock tools and equipment, service and technical solutions for the mining industry.Ourofferingcoversrockdrilling,rockcutting,rock crushing, loading and hauling and handling of materials.Additionally,weofferacompleteassortmentofrockdrilling tools. In fact, we are the only producer of rock drilling tools with inhouse steel and cemented carbide research, development and production facilities.

OUR ORGANIZATIONEvery product is preceded by extensive research and development, and backed with application expertise; aworldwideservicenetwork,offeringon-siteservice,training and roundtheclock support. We have a tradition of localization and a conviction that there can be no substitute for direct service and direct contact with you. Our serviceoriented, global organization is well developed and includes more than 3,500 service technicians located strategically around the world to keep your operation moving.


Our worldwide business activities are conducted via representation in more than 130 countries.


Through close customer collaboration, we develop the products and solutions you need. We also study trends to determine what your needs will be in the future. We are continuously developing unique solutions that help you improve your productivity and safety.

WHICH INNOVATION CAN SOLVE YOUR CHALLENGES?

Our focus and continuous development gives you the latest technical solutions for the most demanding rock conditions, and for the most powerful rock tools. Our products undergo extensive laboratory studies and are mercilesslytestedinthefield.Finally,theyareallevaluatedandrefinedtoprovidethehighestquality-somethingthat characterizes all our products.

A spirit of innovation and active involvement runs through every product.

We invest over 3 billion SEK each year in research and development: more than 2,700 of our employees are dedicated to R&D. We have 8,000 active patents.

A spirit of innovation and active involvement runs through every product. Development is preceded by our extensive research and development. This is supported by a worldwideservicenetworkofferingon-siteservice,training and roundtheclock support. We have technical service specialists strategically located around the world to provide help quickly whenever you need it.


PRESERVE OUR PLANET BOOST YOUR BOTTOM LINEWe always consider environmental impact in all our operations at Sandvik, and never more so than when recycling cemented carbide.

The global shortage of raw materials inspired our scrap recycling program, an initiative that addresses today's increasingenvironmentalconcernswhilealsobenefitingyour bottom line.

We have been collecting and recycling both scrap and discarded drilling consumables for conversion back into basic raw materials for almost 10 years. We make recycling your wornout solid carbide tools as easy as possible, with convenient collection at your operation.

All of our customer service centers are now set up to receive used cemented carbideenhanced products. Our recycling plant in Chiplun, India complies with the moststringentenvironmentalstandards,andiscertifiedto the ISO 14001 and OHSAS 18001 (ISO 45001) international standard.

Not only do we accept a range of Sandvikmanufacturedcarbide bits, inserts and ground engaging tools,we also recycle similar consumables produced byother manufacturers:

Drill bits from top hammer, rotary tricone and raise bore cutters

Bits from downthehole hammers Ground engaging tools Cutting tools for mining, grading, road planing, tunneling and trenching

Usingrecycledcarbidetoproducenewtoolsbenefitstheenvironment.Ourrecyclingprocesssignificantlyreduces energy consumption, reduces carbon and nitrous oxide emissions and produces less waste.

We'll pay market price for your carbide and recycle it to create new tools. Together, we'll reduce the environmental impacts of tool production. It's good for business and the environment.


NEW GENERATION OF CEMENTED CARBIDE We develop our own production processes, strengthening our technical capabilities to continually create even sharper tools that give you the strength to successfully master your toughest challenges.

Research, development and production of key materials, such as cemented carbide, is a vital part of our business.

An extensive research program has resulted in a new generation of carbide grades. These have asignificantlystrongercarbidematrix,andanidealgrainsizeconfiguration.Thismeanssuperiortoughnessand a high wear temperature resistance in your toughest drilling applications.

GC80 OUR TOUGHEST CARBIDE GRADE YET Carbide is generally either wearresistant or tough. Our new GC80 cemented carbide grade combines the best of both worlds. We developed a unique method that enables production of a button with improved wear resistance on the outside while ensuring toughness with a soft center inside. The result is an insert ideal for abrasive rock conditions. You can count on up to 80 percent longer grinding intervals* and up to 60 percent longer bit life* with our GC80 cemented carbide grade.

GC80 was introduced with the launch of our latest top center rock drill bits, which feature an innovative front design. GC80 will soon be available for a wider range of Sandvik rock tools.

*Test results and calculations are to be considered as results reached under certain and controlled conditions. These test results and calculations shouldnotbetreatedasspecificationsandSandvik does not guarantee, warrant or represent the outcome of test results in any or all circumstances.

The gauge buttons of a drill bit are exposed to axial forces. Sandvik cemented carbides have always been able to handle that type of load with minimal risk of breakage.

When the bit wears, the load angle changes and the risk for button breakage increases. Our latest cementedcarbideissignificantlymoreresistant to that type of failure.

Our rolling mill for hollow drill steel is the most modern in the world. The unique, fully automated mill is specially designed for manufacturing this steel product. After rolling, therodsareturnedtoavoiddecarburizationinthefinalrolling process. A long, straight center hole is drilled in

THESTRENGTH YOU NEED

the drill steel blank and a core is inserted. The blanks are hotrolled into a round or hexagonshape. Finally, a carefully controlled cooling process after rolling guarantees uniform mechanical properties. The core is then removed and the drill steel is ready for shipping.

OUR UNIQUE STEEL PRODUCTION


SIX BENEFITS OF SANDVIK GT60:1.The steel in Sandvik GT60 rods is produced in one of the worlds most advanced continuous casting plants. Almost 90 years of experience in rolling hollow bar steel means that we are uniquely able to produce steel with close tolerances and excellent material properties.

2.The Sandvik GT60 system includes Sandvik button bits, to make sure you're prepared for all kinds of rock formations and drilling conditions.

3.The Sandvik GT60 system provides twice the penetration rate while consuming just half the energy of DTH drilling.

4.The 60 mm rod crosssection is optimized for the high energy transfer of impact power in top hammer drilling of 92 to 152 mm holes. Compared with 51 mm rods, the 40 percent larger crosssection and 65 percent higherbendingstiffnessenablefasterpenetrationratesandstraighter holes.

5.Sandvik GT60 is perfectly suited to automatic rod handling systems. Male and female (MF) threads minimize energy losses and simplify handling.

6.Largeflushingholesprovidesuperiorremovalofcuttingsand improve drilling performance. The exact centering of the hole during manufacture ensures uniform steel walls and consistent product performance.

NO CONDITIONS TOO TOUGHSandvik GT60 bits are created in our unique engineering and manufacturing facility. This enables us to tailor the characteristics of the bits to match virtually any drilling conditions you might experience.


LESS HANDLING, MORE WORKHIGHER PRODUCTIVITYEach Sandvik +Range rod delivers you more meters drilled. Fewer rod changes ensures more time for drilling and less time spent replacing. The increased equipment utilization results in improved uptime of the drill rig, while reducing the overall cost of your drilling operation per blast hole.

SUBSTANTIAL COST SAVINGSAn extended service life of 30 percent or more provides you with a lower cost per meter drilled. Since each drill rod delivers more meters of use, fewer rods need to be kept in stock and since fewer rods need to be handled, the associated cost is also reduced.

REDUCED ENVIRONMENTAL IMPACTEach rods longer service life allows you to drill more per kilo of steel. Carbon footprints decrease from rock drill steel production to shipping and transportation on site, as well as after use. There is also a reduction in the total number of kilos of steel that need to be recycled.

+RANGE ON LOCATIONCustomer: High Point Opencast Mining ServiceCountry: South AfricaPrevious solution: Sandvik GT60 standardNew solution: Sandvik GT60+Results: High Point averages between 30 and 35 percent more service life with the new rods, resulting in a production increase of 10 to 15 percent. Quote: When we tested the GT60+ rods, we put the new ones on one machine and the old type on another machine. They were drilling next to each other so we could compare apples with apples, and thats how we discovered that with some of the best rods we got 13,800 meters out of the new GT60+ rods. Thats more than double the average.

Johan Coetzee, managing director of High Point Opencast Mining Service

Customer: Diesel Power Opencast MiningCountry: South AfricaPrevious solution: Sandvik GT60 standardNew solution: Sandvik GT60+Results: In two months of testing the new rods, Diesel Power achieved major fuel savings, amongotherbenefits,improvingthecontractorscarbonfootprint.Quote: We havent had breakages, and we have better threads. When we started using Sandvik +Range, our meters picked up. On a GT60+ drill rod we achieved as much as 24,907 metres. We drilled on a whole string of drill steel for that month.

Erick Walker, senior drill and blast foreman at Diesel Power


CARBURIZATION Case hardening in a furnace with carbon rich gas Increased carbon content in the outer layer hardens material

INDUCTION SURFACE HARDENING (HF) + THREADS Hard, wearresistant surface Improved fatigue strength Induction hardening of threads Rapidly heated and cooled

RODS ENGINEEREDFORWEAR-RESISTANCEAND STRENGTH

SANDVIK ALPHA FEATURES AN ENTIRELY NEW THREAD DESIGNThebenefitsofshortthreadsonhexagonaldrillrods include superior resistance to bending stresses, improved bit guidance and outstanding energy transfer. The sturdy thread is well supported inside the bit skirt, resulting in high precision collaring even in complex rock formations and against uneven surfaces.

MF-DESIGN GIVES STRAIGHTER HOLESMaleFemale (MF) drill rods provide a more rigid drill string than ones which use extension rods and couplings. This is due to a 50 percent reduction in thread play of the MF rod connections versus coupling connections. Drillingwithastifferdrillstringimprovesholestraightness,efficiencyandsafety.


Great versatility, higher penetration rates, straighter holes, longer bit life and lower energy consumption. Thats what you can expect from Sandvik bits: an exceptionally versatile series of threaded buttonbits ranging from 28 to 152 mm in diameter. The buttons

are made from proprietary grades of cemented carbide: Sandviksuppliesallofthemostusefulandeffectivebuttonshapes (spherical, conical or ballistic) and the required skirt designs (regular or Retrac) in order to obtain the best bit for the rock formation in question.

HIGHER PENETRATION RATES, LOWER ENERGY CONSUMPTION

If button failure is a problem in your rock formation, then you are certain to see an increase in bit life with Sandvik rock tools.

DOUBLE YOUR SERVICE LIFE The management at an Australian mine welcomed news of higher productivity and lower costs. Sandvik Alpha drill bits delivered almost double the service life compared to drill bits used previously, which were notorious for button breakages. In a largescale test, stoppages were down and productivity up: meanwhile, bit costs were cut by half.

IMPROVED PERFORMANCEIn tests, Sandvik Alpha bits exceeded the mine average by25percentinaCanadianoperation.Thisfigureincludes bit damage during uncoupling, but after corrections in procedures the bit performed at more than 50 percent above the mines average when used on very hard and abrasive rock. The new bits could also be reground as many as seven times, compared to only three or four with the old standard.

Drifter bit service life was proven to be at least 20 percent higher than competition in a Swedish mine.


LUBRICATIONThread grease reduces wear and helps in the uncoupling of rods. Replace the lid on the grease container after use. The grease must be protected from drilling dust, as left unprotected it will interact with this substance and act as grinding compound instead of lubrication the next time it is used.

THREAD WEARDrilling with worn threads carries a great risk of equipment downtime. When replacing drill rods, it is often more economical to replace the coupling as well. Mixing new and old threads can make the newer ones wear more quickly.

BENT AND BLOCKED DRILL STEELSNot all bent drill steels have to be discarded. They can often be straightened, either in the hole or with a straightening press. Drillsteelsandrodsflushingholescanbecomeblocked. Any blockage can normally be removed with the aid of a copper tube and water.

TRANSPORTATION AND STORAGEDuring transportation, bits and cemented components must be packed so as to prevent damage to the cemented carbide. Even though cemented carbide is very resistant to impact against other materials, it is easily damaged by collision with other components made of the same material.

PREPARATION AND MAINTENANCEGood drilling practice and correct machine settings are important for the service life of your drilling tools. Management and maintenance also play crucial roles inanefficientandprofitableoperation.

HOW TO TAKE CARE OF YOUR THREADS


BUTTON BITS SHOULD BE REGROUND WHEN PENETRATION RATES DROP, OR IF THE CEMENTED CARBIDE SHOWS SIGNS OF DAMAGEFixed grinding routines encourage good working practice. Bits, for instance, should be examined and thenregroundafteraspecificnumberofholes,orat the end of a shift. Premature grinding is not necessarily uneconomical, since less carbide needs to be ground off.Itisbettertoregrindsoonerthanaffectproductivitydue to damage.

The height of the cemented carbide diminishes as wear progresses, resulting in itwearingflat.

Wear to the cemented carbide on the periphery of the bit is abnormally high, causing an antitaper to develop which diminishes the clearance of the bit.

Here, the surface has become fatigued and developed microscopic cracks.

Cemented carbide is one of the most successful composite engineering materials produced.Itsuniquecombinationofstrength,hardnessandtoughnesssatisfies the most demanding applications but working with such high stresses, inserts and buttons are more subject to wear.

REGRIND YOUR BITS MAINTAIN PRODUCTION

Proper grinding adds considerably to the service life of drill bits. Another equally important aspect of proper grinding is that it also enhances the performance of the entire drilling operation, particularly hole straightness.

Grinding should always be done in accordance with safety regulations. Read more about important health and safety information on page 119.


TOP HAMMER DRILLSRenowned for high penetration rates, reliability, fuel economy and low operating cost, Sandvik top hammer drills are diesel powered, selfcontained and equipped with air compressors, dust collection systems and operators cabins. They are designed for drilling 22 to 152 mm ( to 6") blastholes up to 30 meters deep.

Sandvik has invested in expanding the top hammer drilling application, in automation, in environmentally friendly systemsandenergyefficiency.Theinnovationintroduced to the market include Sandvik AutoMine Surface Drilling, automated drilling phases, data sharing, 3D navigation, icontrols and user interface and training simulation,toimprovecompetitivenessandprofitability.

The Sandvik DPi range of heavyduty top hammer rigs drill 89 to 152 mm diameter blastholes. High production rates, hole quality and drilling economy combine for optimal performance. Sandvik DPi drills are designed to use 51 to 60 mm drill steel, which provide high bending resistance, enabling the use of maximum kinetic power for drilling straight holes fast without compromising rock tool service life.

The Sandvik DX range of mediumheavy top hammer drills is renowned for power, versatility, operator comfort and reliability. The drilling capacity is boosted by the revolving superstructure, which allows the operator to turn it 120 degrees, providing a drilling coverage of 18 m. The drills are stable even in the roughest terrain. As the cabin turns with the superstructure, the operator enjoys increased visibility.

HIGH PERFORMING RIGS WITH LOW OPERATIONAL COSTSOur drilling equipment is known for its quality, reliability and high productivity. Every machine we make is designed to deliver the lowest possible cost per meter drilled and alowlife-cyclecost.Weofferanextremelywiderangeofdrillrigs,spanningfrom robust hydraulically controlled to fully automated units that deliver extraordinary production rates and low total cost.


MINING JUMBOSWeofferawidevarietyoffacedrillsforeverythingfromsmallscale mine development up to largescale tunneling. Leading the way through your toughest conditions, Sandvik jumbos deliver the productivity and outstanding reliability you demand. Safety and ergonomics have been key elements in ensuring a comfortable working environment for operators and service personnel.

Welldesigned, modular structures and proven components keep our jumbos running. A combination of efficientrockdrills,robustboomsandadvancedcontrolsmeet even the most challenging requirements. Customers who desire superior excavation quality can also choose a higher level of instrumentation.

ROCK SUPPORT DRILLSOur rock support drill rigs make underground excavations not only more productive workplaces but also safer ones.

Advanced mechanized bolting cycles ensure reliability and integrity of every single bolt installation. The full bolting cycle can be conducted safely by one operator. Sandvik rock support drill rigs can handle all typical bolt dimensions and any type of commonly used bolts, including cable.

Maximum safety for your operator and productivity are the guiding principles in our development of this product family.

LOW-PROFILE DRILLSYou can also count on Sandvik rigs to improve safety, productivity and minimize ore dilution in low reef mining applications. Sandvik 200L series drill rigs have been designedforlow-profilemininginworkingsectionsaslow as 1.7 meters, with optimum drilling coverage and performance. They are typically used in tabular ore bodies such as platinum and chrome mines for development, rock support and production drilling.

Mechanizedlow-profilemininghasbeenemployedforanumber of years with great success on various mining sites, increasing safety and productivity in mines around the world.

We offer a wide range of drill rigs. Please contact your local Sandvik representative for more information.

PRODUCTION DRILLSAccuracymakesallthedifferenceinproductiondrilling.Our longhole drill rigs minimize ore loss and dilution by drilling straight and accurate holes, up to 54 meters in length.

Weve designed a comprehensive range of products fordifferentminingmethodsandminingconditions:differentboomtypes,carriersizeclassesandrockdrillswith appropriate rock tools ensure optimum hole quality for any longhole drilling application.

Automation capabilities of Sandvik production drill rigs vary based on your needs, from manual drilling to fan auto mation and teleremote drilling as an option.


Integral drill steels, tapered rods, drill bits and threaded rods are crucial for peak productivity in all applications. Our drill steel has a high fatigue strength and tough ness, andoffersthehighwearresistancethatensuresanefficientandeconomicdrillingoperation. The unique Sandvik R23 rods and bits for extension drilling provide the

strongest thread in sizes ranging from 33 to 45 mm. For underground applications, we have fully carburized rods with superior wear resistance and service life. When you partner with Sandvik, you can expect consistently high quality and maximum operational dependability when it comes to all small hole drilling applications.

H19(3/4)INTEGRALDRILLSTEELS 24

H22(7/8")INTEGRALDRILLSTEELS 25

H22 TAPERED TOOLS, 12 TAPER 26



R22(7/8")EXTENSIONDRILLINGTOOLS 30

R23(29/32")EXTENSIONDRILLINGTOOLS 31

R25(1")EXTENSIONDRILLINGTOOLS 32

EXTEND SERVICE LIFE INCREASE PRODUCTIVITY

HANDHELD AND SMALL HOLE DRILLING


HANDHELD AND SMALL HOLE DRILLINGH19 (3/4") INTEGRAL DRILL STEELS

DIMENSIONS PART NO.

SeriesL mm ft in

Dmm in

Shank 19108 mm (3/4"4 1/4")

Hex D19

L108

Hex D19

D

21 400 1' 4" 29 19/64" 7240429

800 2' 7" 28 1 7/64" 7240828

1600 5' 3" 27 1 1/16" 7241627

2400 7' 10" 26 1 1/32" 7242426

24 600 2' 27 1 1/16" 7240627

1200 3' 11" 26 1 1/32" 7241226

Bouldersteel

400 1' 4" 24 15/16" 7240424

800 2' 7" 23 29/32" 7240823

Shank 22108 mm (7/8"4 1/4")

Hex D19

L108

Hex D22

D

400 1' 4" 24 15/16" 7280424

400 1' 4" 29 1 9/64" 7280429

800 2' 7" 28 1 7/64" 7280828

1600 5' 3" 27 1 1/16" 7281627

BIT DIAMETER NOTESAll bit diameters are larger than the given dimensions in the catalog.

Cross bits: Can be a maximum of +1 mm due to manufacturing tolerance.

Button bits: Some bit designs can be a maximum +3 mm to compensate for fast diameter wear. The minimum diameter for all button bits is +1.5 mm above the given dimensions.

Keep in mind that a bit always drills a bigger hole than the stated bit diameter.


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

SG

RIN

DIN

G E

QU

IPM

EN

TIN

FO

RM

AT

ION

AN

D B

IT

CL

AS

SIF

ICA

TIO

N G

UID

E

HANDHELD AND SMALL HOLE DRILLINGH22 (7/8") INTEGRAL DRILL STEELS

DIMENSIONS PART NO.

SeriesL mm ft in

Dmm in

Shank 22108 mm (7/8"4 1/4")

Hex D22

L108

Hex D22

D

11 800 2' 7" 34 1 11/32" 714083465

1600 5' 3" 33 1 19/64" 714163365

2400 7' 10" 32 1 1/4" 714243265

3200 10' 6" 31 1 7/32" 7143231

4000 13' 1" 30 1 3/16" 7144030

4800 15' 9" 29 1 9/64" 7144829

5600 18' 4" 28 1 7/64" 714562850

6400 21' 27 1 1/16" 714642750

7200 23' 8" 26 1 1/32" 714722650

12 800 2' 7" 40 1 37/64" 714084065

1600 5' 3" 39 1 17/32" 714163965

2400 7' 10" 38 1 1/2" 714243865

3200 10' 6" 37 1 29/64" 714323765

4000 13' 1" 36 1 27/64" 714403665

4800 15' 9" 35 1 3/8" 714483565

5600 18' 4" 34 1 11/32" 714563465

6400 21' 33 1 19/64" 714643365

7200 23' 8" 32 1 1/4" 714723265

13 400 1' 4" 34 1 11/32" 714043465

800 2' 7" 33 1 19/64" 714083365

1200 3' 11" 32 1 1/4" 714123265

1600 5' 3" 31 1 7/32" 7141631

2000 6' 7" 30 1 3/16" 7142030

16 600 2' 35 1 3/8" 714063565

1200 3' 11" 34 1 11/32" 714123465

1800 5' 11" 33 1 19/64" 714183365

2400 7' 10" 32 1 1/4" 714243265

17 600 2' 41 1 5/8" 714064165

1200 3' 11" 40 1 37/64" 714124065

1800 5' 11" 39 1 17/32" 714183965

2400 7' 10" 38 1 1/2" 714243865

2000 6' 7" 33 1 19/64" 714203365

8000 26' 3" 26 1 1/32" 714802650

8800 28' 11" 25 1" 71488255005

9600 31' 6" 25 1" 71496255005

800 2' 7" 29 1 9/64" 7140829

1600 5' 3" 28 1 7/64" 714162850

2400 7' 10" 27 1 1/16" 714242750


HANDHELD AND SMALL HOLE DRILLINGH22 TAPERED TOOLS, 12 TAPER

BITS FLUSHING HOLE, MM

BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit

D

15 15 17 47 35 28 1 1/8" 77956428B48

15 15 17 47 35 30 1 3/16" 77956430B48

Button bit

D

24 14 27 57 40 32 1 1/4" 77955232B48

24 14 27 58 40 35 1 3/8" 77955235B48

25 15 27 59 40 38 1 1/2" 77955238B48

Button bit

D

24 14 27 57 40 33 1 9/64" 77705233B48

24 14 27 58 40 35 1 3/8" 77705235B48

Button bit

D

14 16 27 57 35 33 1 9/64" 77704433B48

15 15 27 57 35 35 1 3/8" 77704435B48

Button bit

D

24 14 27 67 40 33 1 9/64" 77705433B48

Cross bit

D

14 24 30 1 3/16" 7770903042

16 24.5 32 1 1/4" 7770903242

16 24.5 35 1 3/8" 7770903542


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S


RODS DIMENSIONS PART NO.

L mm ft in

Dmm in

Tapered rod, shank 22108, carburized

L108

Hex D22 610 2' 22 7/8" 7870610611

1220 4' 22 7/8" 7870611211

1830 6' 22 7/8" 7870611811

2000 6' 7" 22 7/8" 7870612011

2440 8' 22 7/8" 7870612411

3050 10' 22 7/8" 7870613111

3200 10' 6" 22 7/8" 7870613211

3660 12' 22 7/8" 7870613711

Tapered rod, shank 22108, HF-hardened For surface drilling

L108

Hex D22 2440 8' 22 7/8" 7870512411

3200 10' 6" 22 7/8" 7870513211

4000 13' 1 1/2" 22 7/8" 7870114011

4400 14' 5" 22 7/8" 7870114411

4800 15' 9" 22 7/8" 7870114811

5600 18' 4 1/2" 22 7/8" 7870115611

6400 21' 22 7/8" 7870116411

7200 23' 7 1/2" 22 7/8" 7870117211

8000 26' 3" 22 7/8" 7870118011

8800 28' 10 1/2" 22 7/8" 7870118811

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE




BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit

D

16 16 28 39 40 38 1 1/2" 77761938B48

16 16 28 39 35 40 1 37/64" 77761940B48

Button bit

D

15 15 27 57 40 32 1 1/4" 77764432B48

15 15 27 58 40 35 1 3/8" 77764435B48

15 15 27 58 35 36 1 7/16" 77764436B48

16 16 27 58 35 38 1 1/2" 77764438B48

16 16 28 59 35 40 1 37/64" 77764440B48


L mm ft in

Dmm in


L108

Hex D22 610 2' 22 7/8" 7876610611

800 2' 7 1/2" 22 7/8" 7876610811

1220 4' 22 7/8" 7876611211

1600 5' 3" 22 7/8" 7876611611

1830 6' 22 7/8" 7876611811

2000 6' 7" 22 7/8" 7876612011

2440 8' 22 7/8" 7876612411

3050 10' 22 7/8" 7876613111

3600 11' 9 1/2" 22 7/8" 7876613611


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S



BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit

D

25 15 27 57 40 32 1 1/4" 77885232B48

24 14 27 57 40 33 1 9/64" 77885233B48

24 14 27 58 40 35 1 3/8" 77885235B48

24 14 27 58 35 38 1 1/2" 77885238B48


L mm ft in

Dmm in


L108

Hex D22 2400 8' 22 7/8" 7888612411

3200 10' 6" 22 7/8" 7888613211

STONE WORKING TOOLS


L mm ft in

Dmm in

Plug hole integral steel

L108

Hex D19

D

150 6" 17 21/32" 7211517

160 6 1/4" 20 25/32" 7211620

200 7 7/8" 20 25/32" 7212020

240 9 29/64" 20 25/32" 7212420

280 11 1/32" 20 25/32" 7212820

310 11 1/4" 20 25/32" 7213120

160 6 1/4" 22 7/8" 7211622

190 7 1/2" 22 7/8" 7211922

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE


HANDHELD AND SMALL HOLE DRILLINGR22 (7/8") EXTENSION DRILLING TOOLS

CROSS BIT FLUSHING HOLE, MM

BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Cross bit

D

1 4.5 2 4.5 38 1 1/2" 7731103842


L mm ft in

Dmm in

Extension rod R22 Hex 22 R22

R 22 R 22

Hex D22

L

800 2' 7" 22 7/8" 7851130820

1200 3' 11" 22 7/8" 7851131220

1600 5' 3" 22 7/8" 7851131620

Shank adapter/Shank rod, Hex 22 R22

L108R 22

Hex D22 255 10 3/64" 22 7/8" 7801610311

Coupling sleeve, R22

D

L

140 5 1/2" 31 1 7/32" 79913331


HANDHELD AND SMALL HOLE DRILLINGR23 (29/32") EXTENSION DRILLING TOOLS


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit

D

14 16 27 57 35 33 1 5/16" 77374433R48

16 16 27 58 40 35 1 3/8" 77375235R48

16 16 27 59 35 38 1 1/2" 77375238AR48

16 16 28 59 35 41 1 5/8" 77375241R48

Button bit

D

34.5 38 69 40 45 1 3/4" 77375345R48


L mm ft in

Dmm in

MF-rod, R23 Hex 22 R23

R 23 R23L

Hex D22 2095 6' 10 1/2" 22 7/8" 7857482120

3050 10' 22 7/8" 7857483120

Female end 31 mm.

Shank adapter / Shank rod, Hex 22 R23

L108R 23

Hex D22 255 10 3/64" 22 7/8" 7807610311

800 2' 7" 22 7/8" 7807610811

1600 5' 3" 22 7/8" 7807611611

2400 8' 22 7/8" 7807612411

3200 10' 22 7/8" 7807613211

3600 11' 9 5/8" 22 7/8" 7807613611

Shank adapter / Shank rod, Hex 25 R 23

L108R 23

Hex D25 255 10 3/64" 25 1" 7807710330

HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

SG

RIN

DIN

G E

QU

IPM

EN

TIN

FO

RM

AT

ION

AN

D B

IT

CL

AS

SIF

ICA

TIO

N G

UID

E


HANDHELD AND SMALL HOLE DRILLINGR25 (1") EXTENSION DRILLING TOOLS


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit

D

14 16 27 59 30 35 1 3/8" 77324435S48

16 16 27 58 40 35 1 3/8" 77325235R48

16 16 27 59 35 38 1 1/2" 77325238R48

16 16 27 59 35 38 1 1/2" 77325238S48

16 16 28 59 35 41 1 5/8" 77325241S48

Button bit

D

34.5 38 69 40 45 1 3/4" 77325345FR48

34 14 39 610 30 48 1 7/8" 77325348AS48

For onerod drilling.


HANDHELD AND SMALL HOLE DRILLINGR25 (1") EXTENSION DRILLING TOOLS


L mm ft in

Dmm in

Shank adapter / rod, Hex 22 R25

L108

Hex D22

R 25

255 10 3/64" 22 7/8" 7802610311

800 2' 7" 22 7/8" 7802610811

1000 3' 3" 22 7/8" 7802611011

Shank adapter / rod, Hex 25 R25

L108

Hex D25

R 25

2400 7' 10" 25 1" 7802712430

3735 12' 3" 25 1" 78027137330

MF-ROD, R25 Hex 25 R 25

R 23 R23L

Hex D25 1220 4' 25 1" 7852311220

2100 6' 10" 25 1" 7852312120

3100 10' 2" 25 1" 7852313120

Extension rod, R25 Hex 25 R25

R 25 R 25L

Hex D25 915 3' 25 1" 7852230920

1220 4' 25 1" 7852231220

1525 5' 25 1" 7852231520

1830 6' 25 1" 7852231820

2435 8' 25 1" 7852232420

3050 10' 25 1" 7852233120


D

L

160 6 1/4" 35 1 3/8" 79923335

HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

SG

RIN

DIN

G E

QU

IPM

EN

TIN

FO

RM

AT

ION

AN

D B

IT

CL

AS

SIF

ICA

TIO

N G

UID

E


SANDVIK TOOL SELECTION FOR SMALL HOLE DRILLING

DESIGN 19

Short holes < 2 m Solid rock formations Low pressure hammers

DESIGN 44 / 52

Premium bit Strong gauge Wear resistant Suitable for all rock conditions High pressure hammers Good penetration rate

DESIGN 54

Premium bit Strong gauge Wear resistant Suitable for all rock conditions High pressure hammers Quick penetration rate

TOOL SELECTION


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

SG

RIN

DIN

G E

QU

IPM

EN

TIN

FO

RM

AT

ION

AN

D B

IT

CL

AS

SIF

ICA

TIO

N G

UID

E


Our engineers are continuously engaged in upgrading our tool systems. Supported by our inhouse manufacturing facilities, they engineer solutions that enable you

and other rockdrilling professionals around the world to work even more profitably with the latest technology.

R25(1")BITTHREAD 40

R28(11/8")BITTHREAD 42

R32(11/4")BITTHREAD 43

SANDVIK ALPHA. 330 BIT THREAD 46

SANDVIK BITS 52

ALWAYS IMPROVING YOUR SOLUTIONS

FACE DRILLING AND BOLTING

We've used advanced analysis to simulate and locate critical bending stresses of various designs to arrive at an optimally dimensioned rod/bit connection.

NEW DESIGN ENSURES TROUBLE-FREE OPERATION

SANDVIK ALPHA 330

Short, robust thread

Reduced bending stresses Easy uncoupling

PRECISION ENGINEERING FOR STRAIGHTER DRILL HOLES WITH SANDVIK ALPHA

Short thread design with sturdy guides well inside thebitskirtoffershigherprecisionincollaringeven in complex rock formations and on uneven surfaces.

Rigid drill string results in straighter holes, permitting optimum drilling patterns and a higher rate of advance.

Exact collaring and straighter holes are prerequisites for productive drilling, with less over break and lower overall costs.

Hexagonal rods in the tool system result in a rigid, integrated power pack drill string, and subsequently superior resistance to bending stresses. This delivers improved bit guidance as well as perfect energy transfer.

Moreefficientenergytransmission,withminimal wear on all components in the drilling system.

Short thread and robust guide improves service life on drifter rods by at least 30 percent compared to Sandvik R32 rods.


Longer tool life is becoming an expectation asyoulooktoimproveefficiencyandreduce your cost per meter. We've reinvented face drill bit design to deliver you

unprecedented improvements in durability, safety and productivity in your most abrasive rock conditions.

OUR INNOVATIVE DESIGNYOUR LONGER LIFE

FACE DRILLING AND BOLTING

ADVANTAGES Our top center design extends grinding intervals by up to 80 percent* compared to our previous design, reducing your bit cost per drilled meter.

Extended bit life by up to 60 percent* compared to our previous design means fewer bit changes and thus more drilling productivity.

Longer tool life means operators dont need to leave the safety of the drill cabin as often to change bits in potentially hazardous areas, such as unreinforced faces.

Largerflushingholesincreaseflushingvolumebyupto 30 percent while maintaining strong penetration rates.

More accurate collaring improves accuracy of drilled holes and consequently blasting results.

INNOVATIVE DESIGNOur top center drill bits for face drilling and bolting were developed to solve persistent tool life problems in particularly abrasive rock. The innovative new design features a raised front, making room for more inserts as well aslargerflushingholesandbailinggrooves.Elevatingtwo or three front buttons a few millimeters above the gauge buttons located on the periphery of the bit protects the gauge from wear, extending bit life.

*Test results and calculations are to be considered as results reached under certainandcontrolledconditions.ThesetestresultsandcalculationsshouldnotbetreatedasspecificationsandSandvik does not guarantee, warrant or represent the outcome of test results in any or all circumstances.


FACE DRILLING AND BOLTINGR25 (1") BIT THREAD


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit, type 52

D

15 16 27 57 45 33 1 5/16" 77324433CS48

14 16 27 59 30 35 1 3/8" 77324435S48

15 16 27 59 30 37 7/16" 77324437CS48

16 16 27 58 40 35 1 3/8" 77325235R48

16 16 27 59 35 38 1 1/2" 77325238R48

16 16 27 59 35 38 1 1/2" 77325238S48

16 16 28 59 35 41 1 5/8" 77325241S48

Button bit, type 53

D

34.5 38 69 40 45 1 3/4" 77325345FR48

34.5 14.5 38 610 30 48 1 7/8" 77325348AS48

Cross bit

D

15 25 35 1 3/8" 7732143542


L mm ft in

Dmm in

Drifter rod, R32 Hex 25 R25

R 32 R 25L

Hex D25 1870 6' 1 5/8" 25 1" 7853241820

2175 7' 1 5/8" 25 1" 7853242120

2475 8' 1 1/2" 25 1" 7853242420

2630 8' 7 1/2" 25 1" 7853242620

2785 9' 1 5/8" 25 1" 7853242720

2935 9' 7 1/2" 25 1" 7853242920

3090 10' 1 5/8" 25 1" 7853243120

3340 10' 11 1/2" 25 1" 7853243320

3700 12' 1 5/8" 25 1" 7853243720


R 32 R 25L

Hex D28 2630 8' 7 1/2" 28 1 1/8" 7853302620

3090 10' 1 5/8" 28 1 1/8" 7853303120

Flushing hole 8.6 mm.


D

L

150 5 29/32" 44 1 47/64" 79933644


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S

FACE DRILLING AND BOLTINGR25 (1") REAMING TOOLS

BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

FrontNo Size

GaugeNo Size mm in

Reaming tools for cut holes / Reaming bit, 6 taper

D

48 89 25 64 2 1/2" 77224864S48

410 810 30 76 3" 77224876S48

610 812 35 89 3 1/2" 77224889S48

THREAD DIMENSIONS PART NO.

L mm ft in

Dmm in

Reaming tools for cut holes / Pilot adapter, 6 taper

D

L

R25 256 10 26 1 1/32" 78222526

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE


FACE DRILLING AND BOLTINGR28 (1 1/8") BIT THREAD


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit, type 52

D

15 16 27 59 30 37 7/16" 77395237S48

16 16 27 59 35 38 1 1/2" 77395238R48

16 16 27 59 35 38 1 1/2" 77395238S48

16 16 28 59 35 41 1 5/8" 77395241S48

16 16 28 510 35 43 1 11/16" 77395243S48

BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

FrontNo Size

GaugeNo Size mm in


D

48 89 25 64 2 1/2" 77224864S48

410 810 30 76 3" 77224876S48

610 812 35 89 3 1/2" 77224889S48


L mm ft in

Dmm in


R 32 R 28L

Hex D28 2475 8' 1 1/2" 28 1 1/8" 7853762420

2785 9' 1 5/8" 28 1 1/8" 7853762720

3090 10' 1 5/8" 28 1 1/8" 7853763120

3700 12' 1 5/8" 28 1 1/8" 7853763720

4305 14' 1 1/2" 28 1 1/8" 7853764320



D

L

150 5 29/32" 44 1 47/64" 79933644

REAMING TOOLS THREAD DIMENSIONS PART NO.

L mm ft in

Dmm in


L

DR28 285 11 1/4" 26 1 1/32" 78221526


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S



BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size

Frontmm in

Button bit, type 51

D

25 15 29 710 10 30 43 1 11/16" 77335143AS80

26 16 29 710 10 30 45 1 3/4" 77335145AS80

34,5 14,5 39 810 10 30 48 1 7/8" 77335148AS80

Button bit, type 52

D

16 16 28 59 35 41 1 5/8" 77335241S48

15 26 29 510 35 43 1 11/16" 77335243AS48

15 26 29 511 30 45 1 3/4" 77335245AS48

16 27.5 29 511 35 48 1 7/8" 77335248AS48

16 27.5 210 512 35 51 2" 77335251AS48

Button bit, type 53/16

D

34.5 14.5 38 69 30 43 1 11/16" 77335343AR48

34.5 14.5 38 610 30 45 1 3/4" 77335345AR48

34.5 14.5 38 610 25 45 1 3/4" 77335345AS48

35 15 39 610 30 48 1 7/8" 77335348AR48

35 15 39 610 30 48 1 7/8" 77335348AS48

D

36 16 39 610 40 51 2" 77331651AR48

36 16 39 610 35 51 2" 77331651AS48

36 16 310 611 35 57 2 1/4" 77331657AS48

37 311 612 30 64 2 1/2" 77331664S48

Button bit, type 54

D

26 26 29 69 40 43 1 11/16" 77335443BR48

26 26 29 610 35 45 1 3/4" 77335445BR48

Button bit, type 55

D

35.5 15.5 39 69 40 45 1 3/4" 77335545AC60

35.5 15.5 39 610 40 48 1 7/8" 77335548AC60

36 16 39 610 40 51 2" 77335551AC60

Button bit, type 18

D

47 510 811 35 76 3" 77331876S48

Cross bit

D

14.5 44.5 45 1 3/4" 77331345A42

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE




L mm ft in

Dmm in


R 38 R 32L

Hex D35 3090 10' 1 5/8" 35 1 3/8" 7854963120

3700 12' 1 5/8" 35 1 3/8" 7854963720

4305 14' 1 1/2" 35 1 3/8" 7854964320

4915 16' 1 1/2" 35 1 3/8" 7854964920

5525 18' 1 1/2" 35 1 3/8" 7854965520



R 38 R 32L

Hex D32 2475 8' 1 1/2" 32 1 1/4" 7854862420

3090 10' 1 5/8" 32 1 1/4" 7854863120

3700 12' 1 5/8" 32 1 1/4" 7854863720

4305 14' 1 1/2" 32 1 1/4" 7854864320

4915 16' 1 1/2" 32 1 1/4" 7854864920


Drifter rod, T38 Hex 32 R32

T 38 R 32L

Hex D32 3090 10' 1 5/8" 32 1 1/4" 7324863120

3700 12' 1 5/8" 32 1 1/4" 7324863720

4305 14' 1 1/2" 32 1 1/4" 7324864320



T 38 R 32L

Hex D35 2475 8' 1 1/2" 35 1 3/8" 7324962420

3090 10' 1 5/8" 35 1 3/8" 7324963120

3700 12' 1 5/8" 35 1 3/8" 7324963720

4305 14' 1 1/2" 35 1 3/8" 7324964320

4915 16' 1 1/2" 35 1 3/8" 7324964920

5525 18' 1 1/2" 35 1 3/8" 7324965520

6135 20' 1 1/2" 35 1 3/8" 7324966120

6440 21' 1 1/2" 35 1 3/8" 7324966420


MF Drifter rod, T38 Hex 35 R32

T 38 R 32L

Hex D35 3700 12' 1 1/2" 35 1 3/8" 7324653720

4305 14' 1 1/2" 35 1 3/8" 7324654320


Coupling sleeve

D

L

R38 170 6 3/4" 55 2 5/32" 79943655

T38 191 7 1/2" 52 2" 73143652


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S

FACE DRILLING AND BOLTINGR32 (1 1/4") REAMING TOOLS

REAMING BIT FLUSHING HOLE, MM

BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Reaming tools for cut holes / Reaming bit, R32

D

46 310 1213 35 102 4" 77335602PS48

PILOT ADAPTERS 6, 12 TAPER THREAD DIMENSIONS PART NO.

L mm ft in

Dmm in


L

DR32 285 11 1/4" 26 1 1/32" 78223526


L

D

R32 278 11" 40 1 37/64" 78213440

REAMING BIT 6, 12 TAPER BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

FrontNo Size

GaugeNo Size mm in


D

48 89 25 64 2 1/2" 77224864S48

410 810 30 76 3" 77224876S48

610 812 35 89 3 1/2" 77224889S48


D

410 812 35 89 3 1/2" 77214889S48

413 813 35 102 4" 77214802S48

813 813 35 127 5" 77214827S48

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE


FACE DRILLING AND BOLTINGSANDVIK ALPHA. 330 BIT THREAD


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size

Frontmm in

Button bit, type 51

D

25 15 29 710 10 30 43 1 11/16" 77675143AS80

26 16 29 710 10 30 45 1 3/4" 77675145AS80

34,5 14,5 39 810 10 30 48 1 7/8" 77675148AS80

Button bit, type 52

D

15 26 29 510 35 43 1 11/16" 77675243AS48

15 26 29 511 30 45 1 3/4" 77675245AS48

16 27.5 29 511 35 48 1 7/8" 77675248AS48


D

34.5 14.5 38 69 30 43 1 11/16" 77675343AR48

34.5 15 38 610 30 45 1 3/4" 77675345AR48

34.5 15 38 610 25 45 1 3/4" 77675345AS48

35 15 39 610 30 48 1 7/8" 77675348AR48

35 15 39 610 30 48 1 7/8" 77675348AS48

D

36 16 39 610 40 51 2" 77671651AR48

36 16 39 610 35 51 2" 77671651AS48

37 311 612 30 64 2 1/2" 77671664S48

Button bit, type 54

D

26 26 29 69 40 43 1 11/16" 77675443BR48

26 26 29 610 35 45 1 3/4" 77675445BR48

Button bit, type 55

D

35.5 15.5 39 69 40 45 1 3/4" 77675545AC60

Button bit, type 18

D

47 511 812 35 76 3" 77671876S48

Button bit, Retrac

D

36 16 39 610 35 51 2" 77674651AS48

Cross bit

D

14.5 44.5 45 1 3/4" 77671345A42


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S



L mm ft in

Dmm in

Drifter rod, T38 Hex 35 330

T 38

Hex D35

330L

2475 8' 1 1/2" 35 1 3/8" 7324672420

3090 10' 1 5/8" 35 1 3/8" 7324673120

3700 12' 1 5/8" 35 1 3/8" 7324673720

4305 14' 1 1/2" 35 1 3/8" 7324674320

4915 16' 1 1/2" 35 1 3/8" 7324674920

5525 18' 1 1/2" 35 1 3/8" 7324675520


Drifter rod, T38 Round 39 330

T 38 DL

330

4915 16' 1 1/2" 39 1 1/2" 7324704920

5525 18' 1 1/2" 39 1 1/2" 7324705520

6135 20' 1 1/2" 39 1 1/2" 7324706120

6440 21' 1 1/2" 39 1 1/2" 7324706420


GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE



BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Reaming tools for cut holes / Reaming bit, 330

D

46 310 1213 35 102 4" 77675602PS48


COUPLING SLEEVES DIMENSIONS PART NO.

L mm ft in

Dmm in

Coupling sleeve, T38

D

L

191 7 1/2" 52 2" 73143652

PILOT ADAPTER 12 TAPER THREAD DIMENSIONS PART NO.

L mm ft in

Dmm in


L

D

330 278 11" 40 1 37/64" 78216740

REAMING BIT 12 TAPER BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

FrontNo Size

GaugeNo Size mm in


D

410 812 35 89 3 1/2" 77214889S48

413 813 35 102 4" 77214802S48

813 813 35 127 5" 77214827S48


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S



BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size

Frontmm in

Button bit, type 51

D

34,5 14,5 39 8x10 10 30 48 1 7/8" 77385148AS80


D

35 15 39 610 30 48 1 7/8" 77385348AR48

35 15 39 610 30 48 1 7/8" 77385348AS48

D

36 16 39 610 40 51 2" 77381651AR48

36 16 39 610 35 51 2" 77381651AS48

Cross bit

D

15 27.5 48 1 7/8" 7738144842


L mm ft in

Dmm in


T 38L

Hex D35

R 35

4305 14' 1 1/2" 35 1 3/8" 7324854320

4915 16' 1 1/2" 35 1 3/8" 7324854920

5525 18' 1 1/2" 35 1 3/8" 7324855520


Drifter rod, T38 Round 39 R35

T 38 D R 35L

4305 14' 1 1/2" 39 1 1/2" 7324724320

4915 16' 1 1/2" 39 1 1/2" 7324724920

5525 18' 1 1/2" 39 1 1/2" 7324725520

6135 20' 1 1/2" 39 1 1/2" 7324726120



D

L

191 7 1/2" 52 2" 73143652

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE



BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Reaming tools for cut holes / Reaming bit, R35

D

26 26 310 1213 35 102 4" 77385602PS48

REAMING BIT 12 TAPER BUTTONS, MM

ANGLE DIMENSIONS D

PART NO.

FrontNo Size

GaugeNo Size mm in


D

410 812 35 89 3 1/2" 77214889S48

413 813 35 102 4" 77214802S48

813 813 35 127 5" 77214827S48


PILOT ADAPTER 12 TAPER THREAD DIMENSIONS PART NO.

L mm ft in

Dmm in


L

D

R35 278 11" 40 1 37/64" 78215440


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit, Retrac R35

D

36 16 39 610 35 54 2 1/5" 77384654A1R48

FACE DRILLING AND BOLTINGSANDVIK EXTRA. R35 (1 3/8") BIT THREAD


L mm ft in

Dmm in


T 35L

R 35D

4305 14' 1 1/2" 39 1 1/2" 7327524320

4915 16' 1 1/2" 39 1 1/2" 7327524920

5525 18' 1 1/2" 39 1 1/2" 7327525520

6135 20' 1 1/2" 39 1 1/2" 7327526120

Flushing hole 14.5 mm. Female end 48.2 mm.

Drifter Extension rod, T35 Round 39 T35

T 35L

D T 35

3050 10' 39 1 1/2" 7327473120

3660 12' 39 1 1/2" 7327473720

4265 14' 39 1 1/2" 7327474320

4875 16' 39 1 1/2" 7327474920

Flushing hole 14.5 mm. Female end 48.2 mm.

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE


SANDVIK BITS FOR DRIFTING AND TUNNELING ARE AVAILABLE IN FIVE BASIC DESIGNS

TYPE 51

Featuring a new bestofbothworlds carbide grade, this bit design is ideal for abrasive rock.

TYPE 52

Designed for maximum bit life in hard and abrasive rock.

TYPE 53

All-rounddesignwithagoodtradeoffbetweenspeedandbitlifelength for hard to medium hard rock.

TYPE 54

Allround design with high penetration rate for hard to medium hard rock.

TYPE 55

Designed for maximum penetration rate in softer and less abrasive rock formations.

FACE DRILLING AND BOLTINGSANDVIK DRIFTER BITS


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

SG

RIN

DIN

G E

QU

IPM

EN

TIN

FO

RM

AT

ION

AN

D B

IT

CL

AS

SIF

ICA

TIO

N G

UID

E

R32 (1 1/4")


Our range of rock tools for top hammer drilling are designed to transmit intensive impact energy into the rock while minimizing energy loss and hole deviation,

Sandvik GT60 enables drilling of holes from 92 mm to 152 mm in diameter. Using a Sandvik GT60 tool system when drilling the typical T51 hole size (102 mm), cansignificantlyimproveholestraightnessthankstothemuchstifferandmorestablerodpackage.TheSandvik GT60 tool system also ensures excellent energy transferefficiencyallthewayfromrockdrilltoholebottom, reducing fuel costs and environmental impact. Increasedenergytransferefficiencyiskeytoachievethebest penetration rate possible from every drill rig.

In addition, a drill string with Sandvik MFrods provides stifferconnectionsthanastringwithseparatecouplingsleeves, due to the 50 percent reduction in thread play.

and optimizing drilling patterns. You'll benefitfromimprovedhole-straightness,superior energy transmission and higher drillingefficiency.

BENEFITS IN BENCH DRILLING: Lower total operating cost. Longer service life of drill steel components. Less downtime, which means improved productivity. Improved safety and better blasting control. Less hole deviation and betterbalanced fragmentation.

Reduced consumption of explosives, which account for about half of all total drilling and blasting costs.

R32(11/4") 56

T35(13/8") 58

T38(11/2") 59

T45(13/4") 61

T51(2") 63

SANDVIK GT60 65

PEAK PRODUCTIVITY LEVEL AFTER LEVEL

BENCH DRILLING



BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in

Button bit, regular skirt

D

36 16 39 610 40 51 2" 77331651AR48

36 16 39 610 35 51 2" 77331651AS48

36 16 310 611 35 57 2 1/4" 77331657AS48

37 311 612 30 64 2 1/2" 77331664S48

D

47 510 811 35 76 3" 77331876S48

D

36 16 39 610 40 51 2" 77335551AC60

36 16 310 610 40 57 2 1/4" 77335557AC60

38 18 310 611 40 64 2 1/2" 77335564AC60

Button bit, Retrac

D

36 39 610 35 51 2" 77334651R48

36 39 610 35 51 2" 77334651S48

D

47 59 810 30 64 3 1/2" 77334864S48

BENCH DRILLINGR32 (1 1/4")


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S


Bit dia.mm

L mm ft in

Dmm in

Guide tube

R 32L

R 32D

51 64 1830 6' 46 1 3/4" 7953461820

Female end 46 mm.

MF-rod, R32 round 32 R32

R 32L

R 32D

3050 10' 32 1 1/4" 7853513120

3660 12' 32 1 1/4" 7853513720

Flushinghole9.2mm.Wrenchflat25.4mm.Femaleend45mm.

Extension rod, R32 round 32 R32

R 32L

R 32D

2440 8' 32 1 1/4" 7853332430

3050 10' 32 1 1/4" 7853333130

3660 12' 32 1 1/4" 7853333730

Flushinghole11.7mm.Wrenchflat25.4mm.

Coupling sleeve R32

D

L

150 5 29/32" 44 1 47/64" 79933644

BENCH DRILLINGR32 (1 1/4")

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE



L mm ft in

Dmm in

MF-rod, T35 round 39 T35

T 35L

T 35D

3050 10' 39 1 1/2" 7327473120

3660 12' 39 1 1/2" 7327473720

Female end 48.2 mm. Flushing hole 14.5 mm.


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in


D

36 16 39 611 30 54 2 1/8" 75171654AS48

Button bit, Retrac

D

36 39 610 35 54 2 1/8" 75174654R48

37 310 611 35 57 2 1/4" 75174657R48

BENCH DRILLINGT35 (1 3/8")


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in


D

37 17 39 611 35 54 2 1/8" 75141654AR48

38 311 612 35 64 2 1/2" 75141664R48

38 311 612 30 64 2 1/2" 75141664S48

D

48 510 811 30 70 2 3/4" 75141870S48

48 511 812 35 76 3" 75141876R48

48 511 812 35 76 3" 75141876S48

48 512 812 35 89 3 1/2" 75141889S48

D

211 16 410 810 30 64 2 1/2" 75142664AS48

211 16 610 811 35 76 3" 75142676AS48

D

38 18 310 611 40 64 2 1/2" 75145564AC60

D

38 18 411 612 40 76 3" 75145576AC60

Button bit, Retrac

D

38 311 612 35 64 2 1/2" 75144664R48

38 311 612 30 64 2 1/2" 75144664S48

D

47 59 810 35 64 2 1/2" 75144864R48

48 510 811 30 70 2 3/4" 75144870S48

48 511 812 35 76 3" 75144876R48

48 511 812 35 76 3" 75144876S48

D

38 18 411 612 40 76 3" 75147576AC60

D

210 16 410 810 30 64 2 1/2" 75147864AS48

211 16 610 811 35 76 3" 75147876AS48

D

38 49 610 40 64 2 1/2" 75147964R48

38 49 610 35 64 2 1/2" 75147964S48

48 610 811 35 76 3" 75147976R48

47 610 811 30 76 3" 75147976S48


GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE



Bit dia.mm

L mm ft in

Dmm in

Guide tube

T 38 T 38DL

64 76 3660 12' 56 2 13/64" 7955563720

Female end OD 56 mm.


T 38 T 38D L

3050 10' 39 1 1/2" 7324473170

3050 10' 39 1 1/2" 7324473780

3660 12' 39 1 1/2" 7324473770

3660 12' 39 1 1/2" 7324473780

4265 14' 39 1 1/2" 7324474370

4265 14' 39 1 1/2" 7324474380

Flushing hole 14.5 mm. Female end OD 56 mm.

Extension rod, T38 round 39 T38

T 38L

T 38D

3050 10' 39 1 1/2" 73244331C30

3660 12' 39 1 1/2" 73244337C30

Flushinghole14.5mm.Wrenchflat32mm.

Light extension rod, T38 Hex 32 T38

T 38L

T 38D

3050 10' 32 1 1/4" 7324693120


Coupling sleeve T38

D

L

191 7 1/2" 55 2 5/32" 73143355

BENCH DRILLINGT38/T38+ (1 1/2")


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in


D

48 510 811 30 70 2 3/4" 75151870S48

48 511 812 35 76 3" 75151876R48

48 511 812 35 76 3" 75151876S48

49 512 813 40 89 3 1/2" 75151889R48

49 512 813 35 89 3 1/2" 75151889S48

D

310 911 913 40 102 4" 75151902R48

310 911 913 35 102 4" 75151902S48

D

212 17.5 610 811 35 76 3" 75152676AS48

310 17.5 610 911 35 89 3 1/2" 75152689AS48

D

48 18 111, 311

612 40 76 3" 75155576AC60

310 110 211, 312

613 40 89 3 1/2" 75155589AC60

Button bit, Retrac

D

48 510 811 35 70 2 3/4" 75154870R48

48 511 812 35 76 3" 75154876R48

48 511 812 35 76 3" 75154876S48

49 512 813 40 89 3 1/2" 75154889R48

49 512 813 35 89 3 1/2" 75154889S48

D

310 911 913 40 102 4" 75154902R48

310 911 913 35 102 4" 75154902S48

D

39 19 111,311

612 40 76 3" 75157576AC60

310 110 211, 312

613 40 89 3 1/2" 75157589AC60

D

211 16 610 811 35 76 3" 75157876AS48

310 18 610 911 35 89 3 1/2" 75157889AS48

D

48 610 811 35 76 3" 75157976R48

47 610 811 30 76 3" 75157976S48

48 611 812 40 89 3 1/2" 75157989R48

48 611 812 35 89 3 1/2" 75157989S48

49 311, 412

813 35 102 4" 75157902S48

D

48 610 811 35 76 3" 75158276R48


GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE



Bit dia.mm

L mm ft in

Dmm in

Guide tube

T 45 T 45DL

7689 3660 12' 63 2 1/2" 7956633770

89102 3660 12' 76 3" 7956763770

Female end 63 mm / 76 mm.


T 45 T 45D L

3050 10' 46 1 1/2" 7325773170

3050 10' 46 1 1/2" 7325773180

3660 12' 46 1 1/2" 7325773770

3660 12' 46 1 1/2" 7325773780

4265 14' 46 1 1/2" 7325774370

4265 14' 46 1 1/2" 7325774380

Flushing hole 17 mm. Female end 63 mm.


T 45L

T 45D

3050 10' 46 1 3/4" 73257331C30

3660 12' 46 1 3/4" 73257337C30

4265 14' 46 1 3/4" 73257343C30

Flushing hole 17 mm.

Coupling sleeve T45

D

L

210 8 1/8" 63 2 31/64" 73153663

BENCH DRILLINGT45/T45+ (1 3/4")


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in


D

410 512 813 40 89 3 1/2" 75161889R48

410 512 813 35 89 3 1/2" 75161889S48

D

313 911 913 40 102 4" 75161902R48

313 911 913 35 102 4" 75161902S48

313 1012 914 35 115 4 1/2" 75161915S48

314 1013 914 35 127 5" 75161927S48

D

312 18 610 911 35 89 3 1/2" 75162689AS48

312 18 612 912 35 102 4" 75162602AS48

D

312 112 211, 312

613 40 89 3 1/2" 75165589AC60

411 111 311, 412

813 40 102 4" 75165502AC60

Button bit, Retrac

D

410 112, 412

813 40 89 3 1/2" 75164889R48

410 112, 412

813 35 89 3 1/2" 75164889S48

D

313 911 913 40 102 4" 75164902R48

313 911 913 35 102 4" 75164902S48

313 1012 914 40 115 4 1/2" 75164915R48

313 1012 914 35 115 4 1/2" 75164915S48

314 1013 914 35 127 5" 75164927S48

D

312 112 211, 312

613 40 89 3 1/2" 75167589AC60

311 111 311, 412

813 40 102 4" 75167502AC60

D

312 18 610 911 35 89 3 1/2" 75167889AS48

D

410 611 812 40 89 3 1/2" 75167989R48

410 611 812 35 89 3 1/2" 75167989S48

411 712 813 35 102 4" 75167902S48

411 311, 412

813 40 102 4" 75167902R48

410 312, 413

814 35 115 4 1/2" 75167915S48

BENCH DRILLINGT51 (2")

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE



Bit dia.mm

L mm ft in

Dmm in

Guide tube

T 51 T 51DL

89 102 3660 12' 76 3" 7957763770

102 127 3660 12' 87 3 1/2" 7957873770

Female end 76 / 87 mm.


T 51 T 51D L

3660 12' 52 2" 7326553770

3660 12' 52 2" 7326553780

4265 14' 52 2" 7326554370

4265 14' 52 2" 7326554380

5485 17' 11 52 2" 7326555580

6095 20' 52 2" 7326556170

Flushing hole 21.5 mm. Female end 71 mm.


T 51L

T 51D

3660 12' 52 2" 73265337C30

4265 14' 52 2" 73265343C30

6095 20' 52 2" 73265361C30


Coupling sleeve T51

D

L

225 8 7/8" 71 2 51/64" 73163671

225 8 7/8" 76 3" 73163676

BENCH DRILLINGT51/T51+ (2")


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

S


BUTTONS, MM

ANGLE DIMENSIONS D

BIT CLASSIFICATION

PART NO.

Front No Size

Gauge No Size

FrontNo Size

GaugeNo Size mm in


D

411 612 814 35 92 3 5/8" 76201892S48

412 612 814 35 96 3 3/4" 76201896S48

D

313 911 913 35 102 4" 76201902S48

314 1012 914 40 115 4 1/2" 76201915R48

314 1012 914 35 115 4 1/2" 76201915S48

314 1013 916 35 127 5" 76201927S48

314 1014 916 35 140 5 1/2" 76201940S48

315 1214 916 35 152 6" 76201952S48

Button bit, Retrac

D

313 911 913 35 102 4" 76204902S48

314 1012 914 40 115 4 1/2" 76204915R48

314 1012 914 35 115 4 1/2" 76204915S48

314 1013 916 35 127 5" 76204927S48

314 1014 916 35 140 5 1/2" 76204940S48

315 1214 916 35 152 6" 76204952S48

D

411 311, 412

813 35 102 4" 76207902S48

411 312, 413

814 35 115 4 1/2" 76207915S48

411 313, 414

814 35 127 5" 76207927S48

412 414, 416

816 35 140 5 1/2" 76207940S48

412 514, 416

816 35 152 6" 76207952S48

D

214 912 912 40 92 3 5/8" 76208792R48

214 912 912 35 92 3 5/8" 76208792S48

214 1012 913 40 96 3 3/4" 76208796R48

214 1012 913 35 96 3 3/4" 76208796S48

214 1012 913 40 102 4" 76208702R48

BENCH DRILLINGSANDVIK GT60+

GR

IND

ING

EQ

UIP

ME

NT

INF

OR

MA

TIO

N A

ND

BIT

C

LA

SS

IFIC

AT

ION

GU

IDE



L mm ft in

Dmm in

MF-rod, GT60 round 60 GT60. For bits from 96 mm.

GT60 GT60DL

3660 12' 60 2 3/8" 7610113780

4265 14' 60 2 3/8" 7610114380

5485 18' 60 2 3/8" 7610115580

6095 20' 60 2 3/8" 7610116180

Female end 85 mm. Flushing hole 22.5 mm.

GT60 GT60DL

4265 14' 64 2 1/2" 7610124380

Female end 85 mm. Flushing hole 25 mm.

MF-rod, GT60 round 60 GT60. For 92115 mm bits.

GT60 GT60DL

4265 14' 60 2 3/8" 7610144380

Female end 82 mm. Flushing hole 22.5 mm.

Pilot tube GT60

GT60 GT60DL

1600 5' 3' 87 3" 7640871680

4265 14' 87 3 1/2" 7640874380

5335 17' 6' 76 3" 7640765380

Female end 85 mm (82 mm on 76 mm tubes).

Drill tube

GT60 GT60DL

4265 14' 87 3 1/2" 7660874380

Always use with tube shank adapter 7600603001 (HL1500, 1560) or 7600603101 (HL1000, 1010).

BENCH DRILLINGSANDVIK GT60+


HA

ND

HE

LD

AN

D

SM

AL

L H

OL

E D

RIL

LIN

GFA

CE

DR

ILL

ING

A

ND

BO

LTIN

GB

EN

CH

DR

ILL

ING

LONG-HOLEDRILLING

SH

AN

K A

DA

PT

ER

SA

UX

ILIA

RY

TO

OL

SG

RIN

DIN

G E

QU

IPM

EN

TIN

FO

RM

AT

ION

AN

D B

IT

CL

AS

SIF

ICA

TIO

N G

UID

E


R32(11/4") 70

T35(13/8") 72

T38(11/2") 73

T45(13/4") 75

T51(2") 77

T45(13/4")TUBEDRILLINGTOOLS 79

ST58(21/4")TUBEDRILLINGTOOLS 80

ST68(23/4")TUBEDRILLINGTOOLS 81

LONG-HOLEDRILLING

Production drilling is at the very heart of your mine. It is therefore vital that you choose products that deliver the accuracy and quality you demand. Developments in underground mining are leading towards

This trend naturally makes drilling accuracy more importantthanever.Manyfactorscaninfluencethestraightness of the drill hole: rock and ore properties, the drilling method, the power and setup of the drill rig, and the correct choice of drilling tools. In this context, a Sandvik MF rod string is a tolerant and forgiving tool system. In addition, it also delivers impressive hole straightness.

With our unique inhouse manufacturing facilities for producing, machining and tailoring steel, we are able to modify the metallurgical properties of all crucial Sandvik MF rod components. This is why all of our rod strings are givenspecificmaterialcharacteristicsinordertomaximizewear, fatigue and corrosion resistance. Ultimately, this

largescale production with fewer sublevels, longer holes and more selective mining,andourofferingwillhelpprepareyoufor your future needs.

boosts your drilling performance by making operations simple and ensuring productivity at all times. In longhole production drilling, the main advantage of our tube dril

OUR INNOVATION YOUR PROFITABLE PRODUCTION

Documents

Transcript of OUR INNOVATION YOUR PROFITABLE PRODUCTION