OSR Dry, Power of RTU Stain Removers -...

2
DRY POWDER

Transcript of OSR Dry, Power of RTU Stain Removers -...

Page 1: OSR Dry, Power of RTU Stain Removers - 0104.nccdn.net0104.nccdn.net/1_5/147/028/2b1/OSR-Sell-Sheet-SE... · OSR Dry, Power of RTU Stain Removers... a Dry Powder Formulation. The Right

OSR Dry, Power of RTU Stain Removers...

www.moldscience.net

...in a Dry Powder Formulation.The Right Ingredients to Get the Job Done

Unique blend of powerful oxidizers and mold stain removers, surfactants and stabilizerspH of 11 to remove mold stains Lower odor formulationNo sanding, brushing, or blasting. Clean a surface in minutes, not hours

Clean and Protect in One DayRemove stains with OSR DryApply Gone 4 Good high pH protective coating as soon as stains are gone.No need to wait for a dry surface for application. Clean and Protect in just one day

Easy to Use Dry Powder FormulationZero risk of leaks caused by damage in transitNot a�ected by extreme heat or coldLeave in the truck and don’t worry about product performance summer or winterEasy Mix Formulation Mix with cold water Ready to apply immediately once mixed Mix what you need for the job at handSeal up unused product in a pail with a lid, and take to next job

After

, Power of RTU Stain Removers...

...in a Dry Powder Formulation.Easy to Use Dry Powder Formulation

Zero risk of leaks caused by damage in transitNot a�ected by extreme heat or coldLeave in the truck and don’t worry about product

•••

•••

••

DRY POWDER

Not A�ected by Extreme Heat or Cold

Before

BoostedFormula

Page 2: OSR Dry, Power of RTU Stain Removers - 0104.nccdn.net0104.nccdn.net/1_5/147/028/2b1/OSR-Sell-Sheet-SE... · OSR Dry, Power of RTU Stain Removers... a Dry Powder Formulation. The Right

www.moldscience.biz

Increase Pro�tability with Mold Science Products – Engineered to Work together!

The High pH Portfolio Developed to get the Job Done

OSR Dry:Oxidizing stain remover with a pH of 11.0 to remove stainsSame day clean and protect when followed up with Gone 4 Good1500 sq. ft. of coverageIdeal applications include porous and semiporous substrates such as attic sheeting,concrete, cinder blocks in crawl spaces,and left in place wood post remediation.

Gone 4 Good High pH Surface Protector:No need for a dry surface for applicationApply directly over top of OSR Dry treated surface1500 sq ft coverage Permanent surface treatment of pH 12.4 to maintain sterility10 year limited warranty

Win More Jobs, Make More Pro�t on Each Job You Win!Harness the power of pH to remove stains and ensure mold does not return

Reduce labor time, make more moneyOne day on job site

Easy message to share with your customersCompelling story, easy to understand by your customers

+

••

••

••

Gone 4 Good High pH