PRACTICE QUICKSTART

orthopulse.com

Charge the OrthoPulse® Preferably the night before delivery

to the patient

1 2

Open the OrthoPulse® app

3

Create the patient’s account

Click the + in the top righthand corner

4

Pair the OrthoPulse® with the patient account

Place the OrthoPulse® in Bluetooth mode by placing it in the charging case.

5

Patient downloads the OrthoPulse® app

Log in using his or her OrthoPulse® ID and password, sent via email

OrthoPulse®

LIGHT ACCELERATED ORTHODONTICS

5 min on lower arch

rinse, optional

sync with the app

charge overnight

5 min on upper arch

STATUS LIGHTS

orthopulse.com

TROUBLESHOOTING

PRACTICE QUICKSTART OrthoPulse®

LIGHT ACCELERATED ORTHODONTICS

Ready for treatmentLow battery, charge deviceTreatment in progress

Bluetooth modeError, please troubleshootSleep mode, out of battery, or fully charged

Having issues?

1. Reset the OrthoPulse®

Lift the OrthoPulse® off the charging tray and replace it 3-4 times consecutively. When successful, the status light will cycle through the color spectrum and you will hear the device beep. You may have to complete the reset one or two times.

2. Sync with the OrthoPulse® app

Open the patient profile in the OrthoPulse® app. The OrthoPulse® will go into Bluetooth® broadcasting mode for 60 seconds when replaced in the charging case. The device will automatically sync with the app when the device is in broadcasting mode and the app is open to the patient profile.

3. Watch the Doctor Quickstart Video

https://vimeo.com/168373666

If issues persist, please contact our support teamEmail: support@orthopulse.comCall: +1 (888) 669-0674

You can also check out our FAQ page at this link:http://orthopulse.com/doctors/support

© 2017 Biolux Research. All rights reserved. OrthoPulse® is a registered trademark of Biolux Research. OPi-AC240 Rev B