ORDER DETAILS STANDARD OPTIONSjb41g1zx5x02d2yay1t1p3ix-wpengine.netdna-ssl.com/.../11/HEPA-BO… ·...
1
"H" HEIGHT WIDTH "W" 05W 14-1/4" 10W 26-1/4" 15W 39-1/2" 30W 40W 76-3/4" 102" SIZE CODES STANDARD SPECS: 1. UNIT SHALL BE MANUFACTURED FROM 14 GAUGE MATERIAL. 2. ALL UNITS ARE DESIGNED FOR 24"X24"X11-1/2" OR 24"X12"X11-1/2" ACTUAL SIZED HEPA FILTERS AND 24"X24"X(2" OR 4") OR 24"X12"X(2" OR 4") NOMINAL SIZE PREFILTERS. 3. GASKET SEAL FILTERS ONLY. 4. DOORS ARE REQUIRED ON BOTH SIDES FOR FILTER CHANGE-OUT. STANDARD GAGE OPTIONS: UNLESS OTHER GAGES ARE SPECIFIED (REFER TO SHEET CSD-020), PREFILTER GAGES SHALL BE A MAGNEHELIC 2002 OR PHOTOHELIC A3002, THE HEPA GAGES SHALL BE A MAGNEHELIC 2004 OR PHOTOHELIC A3004, AND THE OVERALL GAGES SHALL BE A MAGNEHELIC 2005 OR PHOTOHELIC A3005. UNLESS OTHERWISE NOTED, THE GAGE TUBING SHALL BE COPPER WITH BRASS FITTINGS. C U S T O M E R I N F O R M A T I O N 05H 15-1/4" 10H 27-1/4" 15H 39-1/4" 20H 51-1/4" S T A N D A R D O P T I O N S (CHECK IF APPLICABLE) P R E F I L T E R S I Z E NO PREFILTER 2" (NOM.) M A T E R I A L GALVANIZED STEEL T-304L STAINLESS T-316L STAINLESS I N S U L A T I O N , D O U B L E W A L L E D 2" THICK FOIL BACKED W E A T H E R C O V E R STANDARD, INTERMITTENTLY L I F T I N G L U G S 2 4 F L A N G E S PLAIN (STANDARD) DRILLED (REF. CSD-017) UPSTREAM DOWNSTREAM H I G H T E M P G A S K E T YES U N L E S S O T H E R W I S E S P E C I F I E D FRACTION: ALL DIMENSIONS ARE IN INCHES DECIMAL: TOLERANCES ARE: DRAWING NO.: D I M S C A L E : REV. APPR. BY DATE DRAWN BY REV. DESCRIPTION: DATE DRAWN BY: T E X T H E I G H T : DWG SCALE: DATE: APPROVED BY: DATE: OF SHEET SALES DRAWING ANGULAR: NTS ±1° ±.125" ±1/8" 24 - 1 1 4/2/2018 MAG 4/2/2018 RA CSD-011 HEPA BOLT-SEAL HOUSING 4" (NOM.) IF YOU DO NOT SEE THE OPTIONS YOU REQUIRE, THE MANUFACTURER CAN CUSTOM DESIGN YOUR HOUSING TO NEARLY ANY SIZE AND SPECIFICATION. T R A N S I T I O N S UPSTREAM DOWNSTREAM SQUARE COLLAR: H/W ____X____ ROUND COLLAR: ID _________ "H" A C C E S S V I E W "D" E N D V I E W "W" 2" VERTICAL FLANGES UPSTREAM AND DOWNSTREAM 1 1/2" HORIZONTAL FLANGES UPSTREAM AND DOWNSTREAM WELDED AND CAULKED T E S T P O R T ( 3 / 8 " N P T ) UPSTREAM OF PREFILTER DOWNSTREAM OF FINAL FILTER AIR FLOW S T A T I C P R E S S U R E P O R T S (REF. CSD-020) PORTS ONLY (PLUGGED) WITH GAGES FACTORY MOUNTED SHIP LOOSE WEATHER PROOF GAGE BOX OVERALL GAGE MAGNEHELIC PREFILTER GAGE HEPA GAGE PHOTOHELIC 20W 51-1/2" SIZE CODE NOTE: TO DETERMINE SIZE CODE OF DESIRED HOUSING, 05 SIZED UNITS REPRESENT A 12" ACTUAL SIZE HEPA FILTER AND 10 SIZED UNITS REPRESENT A 24" ACTUAL SIZED HEPA FILTER. IE: A 10HX15W UNIT WOULD ACCOMMODATE (1) 24"X24"X11-1/2" HEPA FILTER AND (1) 24"X12"X11-1/2" HEPA FILTER PLACED SIDE BY SIDE. ITEM# 1 2 3 4 5 EX. 15W WIDTH HEIGHT ORDER DETAILS 20H REQ'D QTY. 3 "D" AVAILABLE DEPTHS 2" PREFILTER, 4" PREFILTER OR HEPA ONLY 26-1/4" DEPTH 25H 63-1/4" 30 H 75-1/4" 35H 87-1/4" 40H 99-1/4"
Transcript of ORDER DETAILS STANDARD OPTIONSjb41g1zx5x02d2yay1t1p3ix-wpengine.netdna-ssl.com/.../11/HEPA-BO… ·...
"H"HEIGHT
WIDTH"W"
05W
14-1/4"
10W
26-1/4"
15W
39-1/2"
30W 40W
76-3/4" 102"
SIZE CODES
STANDARD SPECS:1. UNIT SHALL BE MANUFACTURED FROM 14 GAUGE MATERIAL. 2. ALL UNITS ARE DESIGNED FOR 24"X24"X11-1/2" OR 24"X12"X11-1/2" ACTUAL SIZED HEPA FILTERS AND 24"X24"X(2" OR 4") OR 24"X12"X(2" OR 4") NOMINAL SIZE PREFILTERS.3. GASKET SEAL FILTERS ONLY.4. DOORS ARE REQUIRED ON BOTH SIDES FOR FILTER CHANGE-OUT.
STANDARD GAGE OPTIONS: UNLESS OTHER GAGES ARE SPECIFIED (REFER TO SHEET CSD-020), PREFILTER GAGES SHALL BE A MAGNEHELIC 2002 OR PHOTOHELIC A3002, THE HEPA GAGES SHALL BE A MAGNEHELIC 2004 OR PHOTOHELIC A3004, AND THE OVERALL GAGES SHALL BE A MAGNEHELIC 2005 OR PHOTOHELIC A3005. UNLESS OTHERWISE NOTED, THE GAGE TUBING SHALL BE COPPER WITH BRASS FITTINGS.
CUSTOMER INFORMATION
05H 15-1/4"10H 27-1/4"15H 39-1/4"20H 51-1/4"
STANDARD OPTIONS(CHECK IF APPLICABLE)
PREFILTER SIZENO PREFILTER
2" (NOM.)
MATERIALGALVANIZED STEEL
T-304L STAINLESS
T-316L STAINLESS
INSULATION, DOUBLE WALLED2" THICK FOIL BACKED
WEATHER COVERSTANDARD, INTERMITTENTLY
LIFTING LUGS2
4
FLANGESPLAIN (STANDARD)
DRILLED (REF. CSD-017)
UPSTREAM
DOWNSTREAM HIGH TEMP GASKETYES
UNLESS OTHERWISE SPECIFIED
FRACTION:
ALL DIMENSIONS ARE IN INCHES
DECIMAL:TOLERANCESARE: DRAWING NO.:
DIM
SCAL
E:
REV.
APPR. BYDATE
DRAWN BYREV. DESCRIPTION: DATE
DRAWN BY:
TEXT
HEI
GH
T:
DWG SCALE:DATE:
APPROVED BY: DATE: OFSHEET
SALES DRAWING
ANGULAR:
NTS
±1°±.125"±1/8"
24
-11 4/2/2018 MAG
4/2/2018 RA
CSD-011
HEPA BOLT-SEAL HOUSING
4" (NOM.)
IF YOU DO NOT SEE THE OPTIONS YOU REQUIRE, THE MANUFACTURER CAN CUSTOM DESIGN YOUR HOUSING TO NEARLY ANY SIZE AND SPECIFICATION.
TRANSITIONSUPSTREAM
DOWNSTREAM
SQUARE COLLAR: H/W ____X____
ROUND COLLAR: ID _________
"H"
ACCESS VIEW
"D"
END VIEW
"W"
2" VERTICAL FLANGESUPSTREAM AND DOWNSTREAM
1 1/2" HORIZONTAL FLANGESUPSTREAM AND DOWNSTREAM
WELDED AND CAULKED
TEST PORT (3/8" NPT)UPSTREAM OF PREFILTER
DOWNSTREAM OF FINAL FILTER
AIR
FLOW
STATIC PRESSURE PORTS(REF. CSD-020)
PORTS ONLY (PLUGGED)
WITH GAGES
FACTORY MOUNTED
SHIP LOOSE
WEATHER PROOF GAGE BOX
OVERALL GAGE
MAGNEHELIC
PREFILTER GAGEHEPA GAGE
PHOTOHELIC
20W
51-1/2"SIZE CODE NOTE: TO DETERMINE SIZE CODE OF DESIRED HOUSING, 05 SIZED UNITS REPRESENT A 12" ACTUAL SIZE HEPA FILTER AND 10 SIZED UNITS REPRESENT A 24" ACTUAL SIZED HEPA FILTER. IE: A 10HX15W UNIT WOULD ACCOMMODATE (1) 24"X24"X11-1/2" HEPA FILTER AND (1) 24"X12"X11-1/2" HEPA FILTER PLACED SIDE BY SIDE.
ITEM#
1
2
3
4
5
EX. 15W
WIDTHHEIGHT
ORDER DETAILS
20H
REQ'D
QTY.
3
"D"AVAILABLE DEPTHS
2" PREFILTER,
4" PREFILTER OR HEPA ONLY26-1/4"
DEPTH25H 63-1/4"30 H 75-1/4"
35H 87-1/4"
40H 99-1/4"
