OptSim®
-
Upload
usman-m-nooruddin -
Category
Documents
-
view
413 -
download
3
description
Transcript of OptSim®
OptSim™
What we would be discussing in this Presentation.
Overview
Overview• Introduction to OptSim• Uses of OptSim• OptSim Case Studies• Er-Yb-Based Master-Oscillator Power Amplifier (MOPA)• DWDM Ring with OADM (Optical Add-Drop Multiplexer)
Nodes• Interferometric Fiber-Optic Gyroscope (I-FOG)
OptSim™ - An Optical Communication System Simulator
Introduction to OptSim™
Introduction to OptSim• A commercial software by RSoft Design Group Inc..• Advanced Optical Communication System
Simulation package.• Designed for:• Professional Engineering• Cutting Edge Research of:• WDM• DWDM• TDM• CATV• Optical LAN• Parallel Optical Bus, and other systems in telecom
applications.
Introduction to OptSim• Available on both Windows & UNIX platforms.• Fully comprises of a GUI (Graphical User Interface).• Block-Oriented Simulation Methodology• Blocks are represented by icons in OptSim.• Signal Data is passed between component models• Each Block is simulated independently, where parameters
are passed to the connecting blocks.• Internally, blocks are represented by Data Structures &
sophisticated numerical algorithms.
• Includes an extensive Component Library, increasing on a day to day basis due to research in Optics.
Introduction to OptSim• Twin Simulation Engines• Block-Mode Simulation Engine• Sample-Mode Simulation Engine
• Result Analysis & Post Processing• Signal Waveform Plots• Eye Diagrams• Bit Error Rates (BER) Plots• Signal Spectra• Frequency Chirp• Power & Dispersion Maps• Analysis of Cross Talk, Jittering, Skew and others.
Introduction to OptSim• Can be interfaced with:• MATLAB• RSoft’s• BeamPROP™• GratingMOD™• LaserMOD™
• Leading Laboratory Test Equipment including• Agilent's 86146B-DPC Optical Spectrum Analyzer• Agilent's Time Resolved Chirp Measurement Solution• Agilent's 81910A Photonic All-parameter Analyzer• Luna Technologies' Optical Vector Analyzer (OVAe)
Where is OptSim used?
Uses of OptSim
Uses of OptSim• Used to design Optical Communication Systems
and simulate them to determine their performance given various component parameters.
• To understand the working of Fiber Optic Communication Systems and its applications.
• To simulate Fiber Optic communications over a very wide area in order to calculate costs, efficiency and success rate, etc.
What can be accomplished using OptSim?
OptSim Case Studies
Er-Yb-Based Master-Oscillator Power Amplifier • This example demonstrates a master-oscillator
power amplifier using an EDFA and an Er-Yb (Erbium- Ytterbium-) co-doped fiber amplifier (EYCDFA).
MOPA output versus source wavelength
MOPA output power versus pump powerSource Wavelength=1550nm
DWDM Ring with OADM (Optical Add-Drop Multiplexer) Nodes• The DWDM ring consists of six nodes and six fiber spans.
Total number of wavelengths used is eight, with 3 head-end nodes adding/dropping five channels and 3 serial OADM nodes adding/dropping two channels.
DWDM Ring Configuration
Individual OADM Node
OADM Compound Component (CC) Block1x8 Demux8x1 Mux8 Optical Switches
Optical Spectrum & Eye Diagram
To detect ISI (Inter-symbol Interference)
Real-time Optical Performance Analysis
Interferometric Fiber-Optic Gyroscope (I-FOG)• The interferometric fiber-optic gyroscope (I-FOG)
is today an important option for many civilian and military applications such as:• Inertial navigation and guidance systems for automotive,
aircraft, and space industries.• Satellite antennas pointing and tracking.• Mining and tunneling operations.• Helicopter altitude control.
• It brings the advantages of solid-state technology (guided-wave optics and low- voltage low-power electronics) with a cost reduction that enlarges its domain of application.
Interferometric Fiber-Optic Gyroscope (I-FOG)• The optical source is represented by an SLD centered at
1531 nm.• The multifunction integrated optical circuit (MIOC) includes
two phase-modulators in a push-pull configuration.
I-FOG Intensity
I-FOG Power Budget
I-FOG OutputThe same received signal can be used to feed the feedback section for both analog and digital signal processor -based closed-loop detection schemes
Interferometric Fiber-Optic Gyroscope (I-FOG)• OptSim's advanced optical components and
analysis tools enable the user to design and simulate next generation I-FOG.
• The various optical sources and rare-earth doped fiber components can model broadband and SLD sources.
• The comprehensive fiber model takes into account the signal propagation and polarization effects.
• The Monte Carlo analysis capabilities enable the user to study phase and polarization non-reciprocity effects.
Thank You!For your Time & Patience