Optima Product Catalogue
-
Upload
apostolos-karatolios -
Category
Documents
-
view
236 -
download
3
description
Transcript of Optima Product Catalogue
Contemporary
shading systems
[Natural light controlEnergy saving
N. ASSIMAKOPOULOS S.A.
2 Rizountos & Thrakis Streets, 16777 Elliniko, GreeceCall center: +30 210 9600960, fax: +30 210 9 6 0 7430
[email protected] www.assimakopoulos.gr
N. ASSIMAKOPOULOS S.A. is the largest import and manufacturing company, with over 50 years of experience in installations of natural light control systems. It im-ports, manufactures, distributes and installs top quality Shading Systems, and In-terior Decoration products, that meet the specialized demands of all customers. The company’s offices are located in privately owned facilities covering 5500 square meters in Elliniko, including production, storage and show-room spaces. It also has a specialized staff of 50 persons, which keeps up-to-date and is trained on an ongo-ing basis, aiming to provide integrated solutions for all.
Products and applicationsShading Systems do not only add to the aesthetics of interior spaces, but are also an integral part of a successful architectural design. The appropriate installation of systems that regulate natural light in buildings contributes towards their bioclimatic upgrade, which means that energy is saved and costs for heating, air-conditioning and artificial lighting are reduced.
The company’s shading products include:
Interior shading systemsWood and aluminum venetian blindsVertical blinds Roller blindsPanel blindsPleated blinds 25 and 50 mmRoman blindsWooden ShuttersExterior shading systems Venetian blindsAluminum Louvers Roller blindsAwningsShading for patios and pergolasArchitectural stainless steel meshUmbrella Systems Outdoor shading sails
The systems are available in the largest variety on the market and in choices that meet the demands of any space. They are also available with electric motors.
External installation and façade decoration systems
The systems are also available with electric motors, providing the option of their overall integrated management through automation.
Quality management and know-how
The vertical organizational structure of N. ASSIMAKOPOULOS S.A. makes possible the use of interior decorators and architects for designing and managing projects, know-how with high quality services and installation by specialized experienced crews trained by the company. All this at a highly competitive cost and with after-sales technical support, which only an integrated manufacturer can guarantee. At the same time, it has an exclusive cooperation with SOMFY, a globally renowned company with a presence in 45 countries, specializing in manufacturing intelligent mechanisms and automation for both businesses and homes.
Project Portfolio
SHIPPING COMPANIES
ANANGEL SHIPPING ENTERPRISES, CERES HELLENIC SHIPPING ENTERPRISES, CHARTWORLD SHIP, COSTAMARE SHIPPING COMPANY, DYNACOM TANKERS MANAGE-MENT
INSURANCE AGENCIES
AGROTIKI, ALLIANZ, ALPHA INSURANCE, HELVETIA, INTERAMERICAN, SOCIETE GEN-ERALE
TECHNICAL COMPANIES
AVAX, AEGEK, ANASTILOTIKI, ARGON CONSTRUCTIONS, ASPATE TEKTON, ACHILEFS TECHNIKI, VIKELLAS I, VOVOS, GEK, GEKAT, GENEP, CYBARCO HELLAS, DOMOTECHNI-KI, EDAFOSTATIKI, EKTE, EKTEP, ELLINIKI MICHANOLOGIKI, ELLINIKI TECHNODOMIKI, ERGOKAT, AKTOR, IPPOKAMOS, J&P HELLAS
INDUSTRY
VARAGIS, AGET HERCULES, VIANEX, BIOLEX BIC, BP HELLAS, YOTIS, GR. SARANTIS, EVGA – CLINIQUE, HELLENIC BOTTLING COMPANY, ESKIMO, GALLENICA, GLASSART, INFORM – LYKOS, INTRACOM, INTRASOFT, LAVIPHARM, NOVARTIS HELLAS, SMITH KLEIN BEECHAM, TITAN, FAGE
COMMERCIAL COMPANIES – SERVICE PROVISION COMPANIES
ALSTOM, ATHINAIS, VEINOGLOU ORPHEUS, BENETTON - SISLEY, BIOCHECK INTERNA-TIONAL, CARREFOUR - MARINOPOULOS, COSMOTE, DAEMOTOR, ELGEKA, ELTRAK, EMPORIO ARMANI, EXODOUS, ZANOFI, FOLLIE-FOLLIE, FOSS, FUKITSU - CLEVER, NET, GLOBAL, HABITAT, HEWLETT PACKARD HELLAS, HONDOS CENTER, ICAP HELLAS, IM-ACO MEDIA NET GROUP, INTERNET HELLAS, KAROULIAS, ΚΙΤΤΕΝ, CYRPUS AIRLINES, LIDL HELLAS, MERCEDES BENZ HELLAS, METASOFT, MODA BAGNO, ODEON, OLYMPIC DDB NEEDHAM, HARAGIONIS GROUP, OFTHALMOS, PANAFON, REHAU, RENAULT ME-SOGEION, SINGULAR, TELESTET, TYLETYPOS-MEGA CHANNEL, WACKENHUT SECU-RITY HELLAS
The experienced and specialized staff of N. Assimakopoulos S.A. is up-to-date and trained on an ongoing basis, with the purpose of providing integrated solutions both for businesses and private spaces, always aiming at functionality and im-peccable aesthetics.At the same time, all natural light regulating systems have been designed so as to contribute towards saving energy, resulting in lower costs for heating, air-con-ditioning and artificial lighting. We value our cooperation with special decorators and architects, with regard to each project’s design and management, offering out-
standing quality architectural applications depending on your needs.
Sample Projects
PUBLIC SECTOR
ATHENS 2004, GENERAL CHEMICAL STATE LABORATORY, PUBLIC POWER CORPORA-TION, DETEA, ATHENS INTERNATIONAL AIRPORT, NATIONAL OBSERVATORY OF ATHENS, NATIONAL HELLENIC RESEARCH FOUNDATION, HELLENIC POLICE, HELLENIC POST, CENTER FOR RENEWABLE ENERGY SOURCES, KEPYO, CADASTRE, OTE, NAT, ATH-ENS UNIVERSITY, HELLENIC CIVIL AVIATION AUTHORITY, TRADERS’ FUND, INSURANCE AGENCY OF HOTEL EMPLOYEES, TEIRESIAS, TSMEDE,MINISTRY OF ENVIRONMENT
BANKS
ALPHA BANK, BANK OF AMERICA, BARCLAYS, CITIBANK, EGNATIA BANK, EFG EU-ROBANK - ERGASIAS, NATIONAL BANK OF GREECE, HELLENIC BANK, EMPORIKI BANK, ATTICA BANK, CYPRUS BANK, PIRAEUS BANK
HOSPITALS
AIGINITIO, DIAVALKANIKO ATHINON, ATHENS EUROCLINIC, HERA PRIVATE MATERNITY HOSPITAL, IATRIKO ATHINON, NAVAL HOSPITAL OF ATHENS, SISMANOGLIO
HOTELS
BLAZER SUITES, CARAVEL, DIVANI ΑΠΟΛΛΩΝ, GRECOTEL, MARGI HOUSE, OASIS
Interior shading
Shading systems
Venetian blinds
Model ClassicClassic 16 - 25 mm Venetian blinds
Venetian blind shading systems cord, tilt, rod mechanism or electric operation
The installation of the attractive and functional Horizontal Optima Classic venetian blind is a tasteful and elegant inte-rior design choice. In addition to Optima's advanced design and high quality mechanical parts, a large range of modern colors as well as numerous patterns are available to help you create an enchanting play of light and shade with your window treatments. Optima Venetian blinds are available with plain aluminium slats - 16 and 25mm wide, with perforated aluminium slats - 16 and 25mm wide, and with wooden slats - 25mm wide.
Venetian blinds Shading systems
Model ClassicClassic 16 - 25 mm Venetian blinds
Description of parts
1. Headrail Metal headrail, dimensions 25x24mm for 16mm and 25mm slats
2. Headrail and Bottom rail end cups
From semi-translucent plastic material
3. Bottom rail Metal headrail, 19.5x10mm for 16mm and 25mm slats .
4. Ladder string and tapes Fabric tape and cord ladder
5. Operation Titl rod mechanism with cord lock for raise and rotation of the slats.
6. SlatsAluminium slats 16mm and 25mm, and wood slats 25mm in a vari-ety of colors and qualities
7. Brackets Galavanized adjustable metal brackets for wall or ceiling installation
Classic OperationUpdown and rotation using two separate mecha-nisms
• The Classic mechanism consists of a rod and cord. The winds blinds are raised using a cord lock and the angle of the slats is adjusted with a titl rod.
• The prepainted metal headrail 25x24mm, for metal slats 16mm and 25mm, or wooden headrail dimension depending on the slats.
• The prepainted metal bottom rail 19.5x10mm, for slats 16mm and 25mm. Wooden bottom rail according to the wood slat.
• Aluminium slats are manufactured from special al-loys and are 16mm or 25mm wide, painted with (double baked acrylic) paint. 25mm wooden slats are available in two qualities, basswood and laminate.
• Plastic end cups semi-transparent and clear wand.
• Ladder string sand tapes are 1.4mm Nylon for slats 16mm and 25mm wide, with double crossed threading to hold slats in place.
• Adjustable wall or ceiling metal advanzed galvanized brackets, suitable for slats 16mm and 25mm wide.
• Optional Side guides from steel cable covered with transparent PVC, for inclination installation.
Technical Description Optima Classic System Dimensions
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
16mm 3.5m 4m 4.8m2
25mm 3.5m 5m 6.4m2
25mm Wooden 2.4m 2.5m 4m2
25mm Laminate 2.4m 2.5m 4m2
For inclination installation there
is the option to use side guides.
Interior shading
Shading systems
Venetian blinds
Model CordVenetian blind - Cord 50mm
Venetian blinds systems with cord mechanism
The installation of the attractive and functional Horizontal Optima Classic venetian blinds is a tasteful and elegant inte-rior design choice. In addition to Optima's advanced design and high quality mechanical parts, a large range of modern colors as well as numerous patterns are available to help you create an enchanting play of light and shade with your window treatments. Optima venetian blinds are available with plain aluminium slats, 50mm wide, and wooden slats, 50mm wide.
Venetian blinds Shading systems
Model CordVenetian blind - Cord 50mm
Cord Lift and rotation with cords
• The Cord mechanism consists of cords.
• The louvres are raised using a cord lock to lift and ro-tate the blind.
• Prepainted metal headrail 58x51mm, and the prepaint-ed metal bottom rail has a cross section of 50x19.5mm for aluminium venetian blinds, or wooden headrail de-pending on the slats, 50x16mm.
• Aluminium slats are manufactured from special alloys, 16mm or 50mm wide, and are painted with double baked acrylic paint.
• Wooden slats are 50mm wide and are available in a large variety of colors and woods.
• Plastic endups.
• Brackets are metal.
• Optional side guides from steel cable covered with transparent PVC, for inclination installation.
Technical Description
Description of parts
1. Headrail Metal headrail, 58x51mm for 50mm wide slats
2. Brackets Metal wall or ceiling brackets
3. Bottom rail Prepainted metal bottom rail, 50x19.5mm, for aluminium louvres, or wooden sections bottom rail, with dimensions 50x16mm
4. Ladder string and tape Fabric tape and cord ladder.
5. Operation Cord mechanism with cord lock to raise and rotate the slats.
6. Slats 50mm wooden slats in a variety of colours and qualities
7. End cups Semi-translucent plastic material
Optima Cord System Dimensions
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
50mm Wooden Venetian blinds
3m 3m 7,3m2
50mm Distressed Wooden Venetian blinds
2,6m 3m 7,3m2
Leather Venetian blinds 2,6m 3m 7,5m2
For inclination installation there
is the option to use side guides.
Interior shading
Shading systems
Venetian blinds
Model Unitech16mm and 25 mm Unitech Venetian blinds
Venetian blinds shading systems with Unitech side mechanism
One alternative to the Optima Classic is the Optima Unitech system.The Unitech mechanism does not use the classic cord lock for raised and tilt for it operates easily by simply pulling the rod. Other advantages are the improved appearance, as the cord passes through the hollow rod, and easily operates even at an angle of up to 90 degrees. This is useful for points which are difficult to access by hand. Available only with alumini-um louvres, 16mm and 25mm wide.
Venetian blinds Shading systems
Model Unitech16mm and 25 mm Unitech Venetian blinds
Unitech - Lift and tilt with one mechanism
• Reinforced acrylic cord lock, spring assisted.
• Motion transmission cable, with galvanized rotation rod.
• Step transmission rotation 1:1.
• Articulated mechanism for easy operation from 0ο - 90ο.
• Safety cord stop for perfect appearance and practical operation.
• Reinforced 7mm acrylic rod with integrated lift cord for a perfect aesthetic result and easy use.
• Perfect fit of slat stack at the upper limit.
• Avoidance 'bending' bottom rail and slats.
• Available only with 16 and 25mm aluminium vene-tian blinds.
Technical Description Unitech System Dimensions
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
16mm Aluminium Venetian blinds
2.5m 2.5m 4m2
25mm Aluminium Venetian blinds
2.5m 2.5m 4.8m2
For inclination installation there
is the option to use side guides.
Description of parts
Headrail Metal headrail, 25x24mm for 16mm and 25mm slats
Head and bottom rail end cups
From semi-translucent plastic material
Bottom rail Metal bottom rail, 19.5x10mm for 16mm and 25mm slats.
Ladder string and tape Fabric tape and cord ladder
OperationLift abd tilt mechanism, with one control rod which incorporates the cord
Interior shading
Shading systems
Venetian blinds
Model Glaze and Glaze Lift16mm and 25 mm Venetian blinds
Horizontal Glaze and Glaze Lift shading systems
The Optima Venetian blind system with the Glaze Lift mech-anism is used to integrate blinds inside double glazing. The system consists of a cord for raising the louvres and a flex-ible cable for rotation. It is also available without the Glaze retraction lifting mechanism . Available with aluminium lou-vres only, 16 and 25mm wide. The advantages of the Optima Glaze and Glaze Lift is that the system is located between double glazing and as a result it is not affected by the air, soiled by dust or other factors and it also saves space.
Technical Description
Venetian blinds Shading systems
Model Glaze and Glaze LiftVenetian blinds 16, 25 mm
Glaze LiftCable-Cord mechanism
• The slats are raised using the cord and the angle is ad-justed by rotating the cable rod.
GlazeCable-button mechanism
• The angle of the slats is adjusted by rotation of a cable button.
• The cable button is available in plastic white, grey or black, and in metallic, silver or black.
• The system does not have a cord lock and is held in place by tying the cord around the special clip.
• The prepainted metal headrail is 25x24mm for slats 16mm and 25mm wide.
• The prepainted metal bottomrail is 19.5x10mm for slats 16mm and 25mm wide, with a curved finish.
• Low friction thermoplastic meterials which need no maintenance.
• Metallic parts with curved surface at friction points, for minimizing tear of the cord. Semi-translucent plastic end caps. White metal cable-rod. Flexible cable parts made of steel wire-spring.
• Ceiling brackets and cord ladder with double crossed threading to hold slats in place.
Optima Glaze & Glaze Lift System Dimensions
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
16mm Aluminium Louvre
2.5m 2.5m 6.3m2
25mm Aluminium Louvre
2.5m 2.5m 6.3m2
For inclination installation there
is the option to use side guides.
Description of parts
1. Headrail Metal headrail, 25x24mm for 16mm and 25mm slats
2. Bottom rail Metal bottom rail, 19.5x10mm for 16mm and 25mm slats.
3. Head/bottom railend cups
Semi-translucent plastic material
4. Operation Plastic cable button
5. Brackets Metal brackets
6. Slats Aluminium slats, in a variety of colors. Widths 16mm and 25mm
Interior shading
Shading systems
Venetian blind
Model Power 25Classic 16 - 25mm Venetian blinds
Venetian blind shading systems Optima Power 25
Apart from the various manually operated systems, there are also motorized options.In cooperation with Somfy Hellas, a company specialized in the electric motors and automations. The appropriate tools have been developed to meet all motorized operation requirements. Motorized operation uses a 24V motor, with the additional options of wired connection or wireless re-mote control.The 24V motors are embedded in a 25mm headrail.
Technical Description
Venetian blinds Shading Systems
Model Power 25Classic 16 - 25 mm Venetian blinds
• The power mechanism consists of an electric motor by Somfy.The slats are raised and/or rotated via wired connection or wireless remote control, with a five position switch.
• The motor is 24V for a 25mm headrail.
• The headrail is metal prepainted of 25x24mm for metal slats 16mm or 25mm .
• The slats are aluminium, 16mm or 25mm wide, or wooden, 25mm wide.
• Prepainted metal bottom rail 19.5x10mm for slats 16 and 25mm wide, and 50x19.5mm for 50mm wide slats.
• End caps are semi-translucent plastic.
• The brackets are galvanized metal, for wall or ceiling mounting.
Optima Power 25 System Dimensions
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
16mm Aluminium Venetian blinds
2.6 m 3.4 m 5 m2
25mm Aluminium Venetian blinds
2.6 m 3.4 m 5.9 m2
For inclination installation there
is the option to use side guides.
Description of parts
1. Headrail Metal headrail, 25x24mm for 16mm and 25mm slats
2. Motor mechanism 24volt motor
3. Ladder string and tape Fabric tape and cord ladder
4. Octagonal tube System tube
5. Operation Large variety of switches and remote controls
6. SlatsAluminium slats 16mm and 25mm, and wooden slats 25mm in a variety of colors and qualities
Interior shading
Shading systems
Venetian blinds
Model Power 5050mm Classic Venetian blinds
Venetian blinds shading systems Optima Power 50
Apart from the various manually operated systems, there are also motorized options. In cooperation with Somfy Hel-las, a company specialized in the electric motors and auto-mations. The appropriate tools have been developed to meet all motorized operation requirements.Motorized operation uses a 220V motor, with the additional options of wired connection or wireless remote control.The 220V motors are embedded in a 50mm head rail.
Technical Description
Venetian blinds Shading Systems
Model Power 50Venetian blinds Classic 50mm
• The Power mechanism consists of an electric motor by Somfy. The slats are raised and/or rotated via wired con-nection or wireless remote control, with a five position switch.
• The motor is 220V for 50mm headrail.
• The headrail is metal, prepainted, 58x51mm for 50mm wide blades. The slats are aluminium or wooden 50mm wide.
• Prepainted metal bottom rail 50x19.5mm for 50mm wide slats.
• End cups are semi-translucent plastic.
• The brackets are metal galvanized, for wall or ceiling mounting.
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
16mm Aluminium Louvre 4m 5,5m 12.7m2
25mm Aluminium Louvre 4m 5.5m 18.2m2
25mm Wooden Louvre 2.4m 2.5m 6m2
25mm Laminate Louvre 2.6m 2.5m 6m2
50mm Wooden Louvre 3m 3.5m 7.5m2
50mm Distressed wood 2.6m 3.5m 7.4m2
50mm Leather cord ladder 2.6m 3.5m 7.4m2
For inclination installation there
is the option to use side guides.
Description of parts
1. Headrail Metal headrail, dimensions 58x51mm for 50mm wide slats
2. Motor mechanism 220volt Motor
3. Ladder string and tape Fabric tape and cord ladder
4. Octagonal tube System tube
5. Operation Large variety of switches and remote controls
6. SlatsAluminium slats 50mm and wooden slats 50mm, in a variety of colors and qualities
Optima Power 50 System Dimensions
Exterior shading
Manual or power operated rotating and retractable horizontal exterior aluminium shading systems.
Exterior aluminium blinds provide the possibility of total control of natural light.The louvres can be opened, closed and rotated. Exterior in-stallation blocks solar radiation by up to 80%.An excellent solution for energy efficiency in buildings (re-ducing heating and cooling costs) while providing silent op-eration due to external installation.
Exterior aluminium blinds
Model 90ZEP, 90ZMPManual or power operated horizontal exterior aluminium shading systems,rotating and retractable.
Description of parts
Headrail Galvanized metal headrail 58x56mm cross section.
Blade Extruded aluminium alloy profile slat, Z type, 0.45mm thick.
Bottom rail Aluminium bottom rail (extruded profile).
Plug Metal bottom rail side cap.
Belt - cordsBraided “ladder” system for connecting slats, with loops and liftingbelt.
Motor 220V motor.
Crank Manual crank system.
Guide rails Single or double square guide rail for slat movement.
Guide rails Single or double round guide rail for movement of slats.
Brackets Galvanized metal brackets.
• Lift and rotate either by hand crank (90ZMP) or electric200V motor (90ZEP).
• The mechanisms are installed on the prepainted metal headrail, which has a square cross-section 58x56mm and 0.6mm thickness.
• The system’s slats are Z shaped, turned inwards at theends and along the length of the louvre slats.
• Slat width is 91mm and thickness 0.45mm.
• Slats are made of special aluminium alloy painted with double baked acrylic paint in RAL colors.
• The bottom rail is prepainted special extruded metal profile, with dimensions corresponding to the length and width of the louvres.
• Slats are rotated and lifted using a special polyester loop ladder system and an 8mm synthetic belt resistantto UV radiation.
• The slats move vertically (opening - closing) guided by special extruded aluminium profile movement guides to the left and right of the system.
• The guide rails are made of special aluminium alloy and after extrusion they are manufactured in either 20x20mm square cross-sections, or round with a diam-eter of 40mm.
• The systems are available with optional fascia valance to cover the headrail, of various types. The fascia va-lance are available in maximum single lengths of 3m and 1.5mm thickness.
Technical Description Optima Classic System Installation Dimensions
Manufacturable Dimensions
SystemMaximumwidth in m
Maximum height in m
Maximum surface area in m2
90ZEP 4m 4m 14m2
90ZMP 4m 4m 9m2
SystemMinimum
manufacturablewidth in cm
90ZEP 61
90ZMP 41
Heightof system(cm)
1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000
90ZEP (cm) 180 190 200 220 230 240 250 260 270 290 300 310 320
90ZMP (cm) 160 170 180 200 210 220 230 240 250 270 280 290 300
Exterior aluminium blinds
Model 90ZEP, 90ZMPExterior blinds with 91mm aluminium slats, Z type, aluminiumprofile guide rails and operation by motor or hand crank.
A: Distance to first slat 16 - 24 cmB: Package height (values in corresponding table)C: Fascia head box heightD: Total system heightE: Recommended recess space for 13cm system
Fascia headbox types
Exterior shading
Exterior aluminium blinds
Model 80SEP, SMP, SEW, SMWManual or power operated horizontal exterior aluminium shading systems,rotating and retractable.
Manual or power operated rotating and retractable horizontal exterior aluminium shading systems.
Exterior aluminium blinds provide the possibility of total control of natural light.The louvres can be opened, closed and rotated. Exterior in-stallation blocks solar radiation by up to 80%.An excellent solution for energy efficiency in buildings (re-ducing heating and cooling costs) while providing silent op-eration due to external installation.
• Rotation and lifting retraction either by hand crank (80SMP/SMW) or electric 200V motor (80SEP/SEW).
• The mechanisms are installed on the prepainted metal headrail, which has a square cross-section 58x56mm and 0.6mm thickness.
• The system’s slats are C shaped, turned inwards at the ends and along the length of the louvre slats.
• Slat width is 82mm and thickness 0.45mm. Slats are made of special aluminium alloy painted with double baked acrylic in RAL colors.
• The bottom rail is prepainted special extruded metal profile, with dimensions corresponding to the length and width of the louvres.
• Slats are rotated and retracted using a special polyester loop ladder system, 84mm wide, with 64mm steps,and an 8mm synthetic belt resistant to UV radiation.
• The slats move vertically (opening - closing) guided by special extruded aluminium profile movement guides to the left and right of the system, or stainless steel cable guides.
• The guide rails are made of special aluminium alloy and after extrusion they are manufactured in either 20x20mm square cross-sections, or round with a diam-eter of 40mm.
• The systems are available with optional fascia valance head boxes to cover the headrail, of various types. The fas-cia head boxes are available in maximum single lengths of 3m and 1.5mm thickness.
Technical Description
Description of parts
Headrail Galvanized metal head rail 58x56mm
Blade Extruded aluminium alloy profile slat, C type, 0.45mm thick.
Bottom rail Aluminium bottom rail (extruded profile).
Plug Metal bottom rail side cap.
Belt - cordsBraided “ladder” system for connecting slats, with loops and liftingbelt.
Motor 220V motor
Crank Manual crank system.
Guide rails Single or double square guide rail for slat movement.
Guide rails Single or double round guide rail for movement of slats.
Guide rails Steel cable guide for movement of slats with wall mounting.
Brackets Galvanized metal brackets.
A: Distance to first slat 16 - 24 cmB: Package height (values in corresponding table)C: Fascia head box heightD: Total system heightE: Recommended recess spacefor 13cm system
Manufacturable Dimensions
SystemMaximumwidth in m
Maximum height in m
Maximum surface area in m2
90ZEP 4 4 14
90ZMP 4 4 9
SystemMinimum
manufacturablewidth in cm
90ZEP 61
90ZMP 41
Exterior aluminium blinds
Model 80SEP, SMP, SEW, SMWExterior louvres with 82mm type C aluminium slats, Optima 80SEP, 80SMP with alu-minium profile guide rails, motorized or hand crank operated, and 80SEW, 80SMW with
cable guides, motorized or with manual crank operation.
Fascia headbox types
Heightof system(cm)
1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000
80SEP - 80SEW 180 190 200 220 230 240 250 260 270 290 300 310 320
80SMP - 80SMW 180 190 210 220 230 250 260 270 250 290 300 320 340
Exterior shading
Exterior aluminium louvres
Model LineMExterior shading systems with LineM aluminium louvresand aluminium profile guide rails, vertical or horizontalconfiguration.
Manual or power operated rotating and retractable horizontal exterior aluminium shading systems.
Exterior aluminium blinds provide the possibility of total control of natural light.The louvres can be opened, closed and rotated. Exterior in-stallation blocks solar radiation by up to 80%.An excellent solution for energy efficiency in buildings (re-ducing heating and cooling costs) while providing silent op-eration due to external installation.
Exterior aluminium louvres
Model LineMExterior vertical or horizontal aluminium louvre shading systems with aluminium profile guide rails, operated by motor or hand crank.
Description of parts
M10 fin Eliptical aluminium fin: width 10cm, weight 1029gr/m.
M15 fin Eliptical aluminium fin: width 15cm, weight 2438gr/m.
M20 fin Eliptical aluminium fin: width 20cm, weight 2371gr/m.
M25 fin Eliptical aluminium fin: width 25cm, weight 3366gr/m.
M30 fin Eliptical aluminium fin: width 30cm, weight 5249gr/m.
M40 finEliptical aluminium fin, consisting of three aluminium profiles, totalwidth 40cm and weight 5361gr/m.
M50 finEliptical aluminium fin, consisting of three aluminium profiles, totalwidth 50cm and weight 6163gr/m.
M60 finEliptical aluminium fin, consisting of three aluminium profiles, totalwidth 59.72cm and weight 6163gr/m.
Fin plugs Left and right stainless steel louvre side cover (plug).
Motor 220V motor.
System guide rails(for louvres)
Special profile aluminium guide rails (50x50) or (60x60) mmaccording to system requirements.
Louvre slat motiontransmission guide
17x12mm aluminium louvre slat motion transmission guide.
Maximum dimensions for louvre slat length in horizontal position
LOUVRE CODELOUVRE WIDTH(mm)
INSTALLATIONANGLE(DEGREES)
INSTALLATIONHEIGHT (m)
0-8m 8-20m 20-100m
PLAINLOUVRESNORMALLOUVRES
Line M10 I00,0 0° 2050 I900 I700
Line M15 I50,0 0° I800 I600 I500
Line M20 200,0 0° 2400 2200 2050
Line M25 250,0 0° 2500 2250 2050
Line M30 300,0 0° 4000 3200 2850
COMPOSITELOUVRESCOMPOSITELOUVRES
Line M40 400,0 0° 3I00 3000 2900
Line M50 500,0 0° 3I00 2700 2450
Line M60 597,2 0° 3000 2700 2450
• LINE M - The louvres are manufactured from extruded natu-ral aluminium. Their ends are sealed with two stainless steelcaps (ent). The two ends have a socket, forming a single unit with the interior profile. This type of louvres, with an eliptical shape, is provided in standard dimensions, with widths of 10, 15, 20, 25, 30, 40, 50 and 60cm. Louvres are available in a anodized finish or any RAL paint.
• The louvres can be rotated with a manually operated crank handle system or simply by a lever installed outside the window.
• A recommended method is rotation by a linear motion elec-trical system, using a switch operated single phase 220V power supply with terminal array. This operating system has the appropriate power capacity to operate louvres of more than 10 m long.
• Systems operating commands may also be incorporated into a BMS system.• The louvres are installed in special profile guides which
regulate louvre pitch and provide the housing for horizontal or vertical installation. They are manufactured from extruded aluminium in special cross-sections and various dimen-sions, according to requirements. The available profiles are 50x50mm and 60x60mm.
• The louvres are operated using an aluminium rod with a Π shaped cross-section (17x12mm).
• Stainless steel fittings (bolts, nuts, washers) are used for connection to the fins.
• The guide rails are mounted on special stabilizing brackets on walls or load-bearing structure of the building.
Technical Description
Array (Guide - motor - louvre)
Horizontal layout of louvre system
Horizontal layoutof louvre system
Louvre pitch(determined according torequirementsand choice)
Exterior shading
Exterior aluminium louvres
Model LineW, LineHTExterior shading systems with aluminium and wood louvrestypes LineHT and LineW with aluminium profile guide rails andvertical or horizontal configuration.
Manual or power operated rotating and retractable horizontal exterior aluminium shading systems.
Exterior aluminium blinds provide the possibility of total control of natural light.The louvres can be opened, closed and rotated. Exterior in-stallation blocks solar radiation by up to 80%.An excellent solution for energy efficiency in buildings (re-ducing heating and cooling costs) while providing silent op-eration due to external installation.
Exterior aluminium louvres
Model LineW, LineHTExterior shading systems with aluminium and wood louvres types LineHT and LineW with aluminium profile guide rails and vertical or horizontal configuration. Motorized or hand crank operation.
• LINE W - The blinds consist of a wooden louvre which incor-porate an eliptically shaped section with 2 holes at the ends, allowing for insertion of the rotary axle and its screws. The ends of the louvres are sealed with stainless steed and caps. This type of wooden louvres, with an eliptical shape, is pro-vided in standard dimensions, in widths of 15 and 19cm. They are available in various weatherproofed qualities and corre-sponding colors including red cedar, oak, teak and iroko. The maximum louvre length is 2 meters.
• LINE HT - The blinds consist of perforated slats, 50 or 32cm wide, with side folds to render them rigid. The perforated blade is screwed into a light-weight construction consisting of a central 42,5mm diameter extruded aluminium tube and a 10cm wheelbase.The rotation is made as a linear motion electrical system, us-ing a switch operated single phase 220V power supply with terminal array. This operating system has the appropriate power capacity to operate louvres of more than 10m long.The reduction gear unit is installed in the box at the bottom,
outside the space. Operating commands may also be incor-porated into a BMS system.
•The blinds are installed in special profile guides which reg-ulate louvre pitch and provide the housing for horizontal or vertical installation. They are manufactured from extruded aluminium in special cross-sections and various dimensions, according to requirements. The available profiles are 50x50 and 60x60mm.
•The blinds are operated using an aluminium rod with a Π shaped cross-section (17x12mm). Stainless steel fittings (bolts, nuts, washers) are used for connection to the fins. The guide rails are mounted on special stabilizing brackets on walls or load-bearing structure of the building.
Technical DescriptionLayout (Guide - motor - louvre)Horizontal layout of the louvre system
Louvre pitch(determinedaccording to requirementsand choice)
Description of parts
W15 / W19 louvresEliptical wooden louvre, 15 or 19cm in length, available in variousqualities and corresponding colors including red cedar, oak, teak andiroko.
ΗΤ530 /375 FinSemi-eliptical perforated aluminium louvre, 37 or 53cm wide, with analuminium support mechanism.
Fin plugsLeft and right stainless steel louvre side cover (plug).(Only for W15/W19)
Motor 220V motor
System guide rails(louvres)
Special profile aluminium guide rails (50x50) or (60x60) mmaccording to system requirements.
Louvre slat motiontransmission guide
17x12mm aluminium louvre slat motion transmission guide.
Interior shading
Vertical blinds
Model V-ABS-MManually operated vertical blinds ABS-M 89, 127, 250mm
Vertical blinds shading systems with chain and cord mechanism
The Optima V-ABS vertical blinds system is elegant and timeless. It offers elegant lines, ideal visibility and excellent protection from the sun. A decorative solution for all spaces, available in a large variety of designs, colors and materials.It can be fitted exactly to the dimensions of the windows or doors and is suitable for both businesses and residences. The basic operating mode employs a cord mechanism, for opening and closing, and a chain for adjusting the angle. They also have a mechanism for releasing the slats to clean the window.
Vertical blinds
Model V-ABS-MManually operated vertical blinds ABS-M 89, 127, 250mm
Description of parts
1. Headrail Head rail ABS 45x27mm
2. Cord drive runnerPlastic runner with plastic hookH shaped or J shaped metal hook
3. Spacer Metal spacers for louvre runner.
4.Control unit mechanism Swivel mechanism for moving louvres through 180 degrees.
5. Chain ball & Cord2mm Nylon cord and plastic or metal bead type chain ball.
6. Cord counter weight Various cord and chain counter weights.
7. Louvre bottom weight Plastic louvre bottom weight.
8. BracketsAdjustable L shaped brackets.The distance is adjusted according to the width of the louvre.
9. LouvresLouvres blades in widths of 89, 127, and 250mm.In various qualities and colors.
• The vertical V-ABS blinds are available in widths of 89, 127 and 250mm.
• The headrail is white or anodized, 27x45mm.
• The cord drive runners are of specially designed plas-tic, with plastic or metal hooks, depending on the type of louvre. The spacer, a small bar of various lengths depending on the louvre, is attached to eachrunner, permitting free roll-ing and smooth operation with minimum friction.
• The control unit mechanism is designed to allow rota-tion of the louvres through 180 degrees.
• The cord for operating the louvres is 2mm nylon, and there is a range of counterweights.
• The louvres are rotated by a plastic or metal chain ball with or without clip. Each louvre, with the exception of PVC louvres, also has a bottom counterweight, with plastic cover.
• The bottom weights are linked to each other with a plas-tic or metal chain attached to each weight with special clips.
• The vertical louvres can be PVC, fabric, woven wood, string and wood, and are available in a wide range of col-ors and designs.
• The brackets are metal, with adjustable extensions for mounting on walls or ceilings.
Technical Description
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
FAB 89, 127, 250mm
4m 4m 12.3m2
STRING 89,250mm 4m 3m 12m2
WSL, LAMINATE GLOSSY 89mm
3m 2.7m 7,3m2
WMS, 89mm 3m 3m 7,3m2
PVC 3m 3m 7,3m2
V-ABS-M System Dimensions
Interior shading
Vertical blinds
Model V-DECOManually operated vertical blinds V-DECO 89, 127, 250mm
Vertical blinds systems with coloured chain and cord mechanism
The Optima V-Deco vertical blind system is elegant and timeless.It offers elegant lines, ideal visibility and excellent protec-tion from the sun. A decorative solution for all types of space.All plastic parts of the system are available in 7 colors to match the color of the louvres. It can be fitted exactly to the dimensions of the windows or doors and is suitable for both businesses and residences. The basic operation is by cord mechanism, for opening and closing, and a chain for adjusting the angle.
Vertical blinds
Model V-DECOManually operated vertical blinds V-DECO 89, 127, 250mm
• The vertical V-DECO blinds are available in widths of 89, 127 and 250mm.
• The headrail is painted aluminium, 45x27mm, available in 7 colors.
• The cord drive runners are of specially designed plas-tic, with plastic or metal hooks, depending on the type of louvre.
• The spacer, a small bar of various lengths depending on the louvre, is attached to each runner, permitting free rolling and smooth operation with minimum friction.
• The control unit mechanism is designed to allow the ro-tation of the louvres through 180 degrees and is available in the same colors as the headrail.
• The 2mm nylon cord which moves the louvres is avail-able in the same colors as the head rail.
• The louvres are rotated by a plastic or metal chain ball with or without clip.
• The plastic chain is available in the same colors as the head rail. Each louvre, with the exception of PVC louvres, also has a bottom counterweight, with plastic cover.
• The bottom weights are linked to each other with a plastic or metal chain attached to each weight with spe-cial clips. The louvre connection chain ball is available in white for white, beige and grey headrails, and metal for other colors.
• The vertical louvres can be PVC, fabric, woven wood, string and wood, and are available in a wide range of col-ors and designs.
• The brackets are metal, with adjustable extensions for mounting on walls or ceilings.
• Runners for 250mm louvres are only available in white color.
Technical Description
Description of parts
1. Headrail Headrail ABS 45x27mm.
2. Cord drive runnerPlastic runner with plastic H-shaped hook or metal J shaped hook. Available in 7 colors.
3. Spacer Metal spacers for louvre runner.
4. Control unitSwivel mechanism for moving louvres through 180 degrees. Available in 7 colors.
5. Chain - Cord2mm Nylon cord and plastic or metal chain ball. Available in 7 colors.
6. Cord counter weight Various cord and chain counter weights.
7. Louvre bottom weight Plastic louvre bottom weight.
8. BracketsAdjustable L shaped brackets.The distance is adjustable according to the width of the louvre.
9. LouvresLouvre blades 89, 127, 250mm wide. In various qualities and colors.
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
FAB 89, 127, 250mm
4m 4m 12.3m2
STRING 89, 250mm 4m 3m 12m2
WMS, 89mm 3m 2.7m 7,3m2
PVC 3m 3m 7,3m2
V-DECO System Dimensions
All plastic system parts as well as chain and cordare availablein the same 7 colors as the mechanism.
Interior shading
Vertical blinds
Model V-ABS-EMotorized vertical blinds ABS-Ε 89, 127, 250mm
Motorized vertical blinds shading systems
The motorized Optima V-ABS-E vertical blinds system is elegant and timeless.Its appearance is similar to the V-ABS-M. It differs as far as its motorized operation is concerned. Power supply is provided by cable connection or batteries in case with full remote control.Synchronization of the system and determination of limits is automatic at startup.Rotation of louvres always precedes retraction in order to avoid any potential malfunctions.
Vertical blinds
Model V-ABS-EMotorized vertical blinds ABS-Ε 89, 127, 250mm
• Vertical V-ABS blinds are available in widths of 89, 127 and 250mm.
• The headrail is white or anodized, 27x45mm.
• The cord drive runners are of specially designed plas-tic, with plastic or metal hooks, depending on the type of louvre.The spacer, a small bar of various lengths depending on the louvre, is attached to each runner, permitting free rolling and smooth operation with minimum friction.
• A 88x66x234mm 12V DC-3A motor is used to move the louvres along the track and rotate them through 180 de-grees.
• Power supply is provided by cable connection or batteries in case with remote control.
• Synchronization of the system and determination of limits is automatic at startup.The rotation of the blinds always precedes the raising in order to avoid any malfunction
• Each louvre, with the exception of PVC louvres, also has a bottom counterweight, with plastic cover.
• The bottom weights are linked to each other with a plas-tic or metal chain attached to each weight with special clips.
• The vertical louvres can be PVC, fabric, wood weave, string and wood, and are available in a wide range of col-ors and designs.
• The brackets are metal, with adjustable extensions for mounting on walls or ceilings.
Technical Description V-ABS-E System Dimensions
Description of parts
1. Headrail Headrail ABS 45x27mm.
2. MechanismSame as the manually operated system withoutchain and operating cord.
3. LouvresLouvre blades 89, 127, 250mm wide.In various qualities and colors.
4. BracketsAdjustable L shaped brackets.The distance is adjusted according to the width of the louvre.
5. Motor12V DC-3A motor 88x66x234mm.(Available in white color only).
6. Control Wireless battery remote control
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
FAB 89, 127, 250mm
4m 4m 16m2
STRING 89,250mm 4m 3m 12m2
WMS, 89mm 4m 3m 12m2
PVC 4m 3m 12m2
WSL, 89mm 4m 2,7m 10,8m2
Interior shading
Roller blind systems with a chain or power operated mechanism
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 250ARoller blind mechanism plastic white 250A
Roller blind systems
Model 250ARoller blind with plastic mechanism 250Α
• White plastic roller blind mechanism (4.5x5.5 cm) with chain, type 250Α, click type. It has an integrated metal clutch spring mechanism to lock the position and pre-vent unwanted roll down of the roller without the use of the chain. White plastic brackets, with the option to install on walls or ceilings.
• If the installation of the plastic brackets is impeded by the nature of the wall or ceiling surface, or in the case of larger sized systems, it is possible to use white extruded aluminium profile to install the mechanism. In this case, white metal brackets are used. The number of brackets is determined by the width of the system.
• Aluminium roller tube has 25mm with adhesive tape to secure the fabric.
• The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube, with a special groove for insertion of the dowel rod.
• Plastic round endcups for bottom rail, are provided for decorative purposes.
• White plastic chain ball, or optionally chain ball, mainly for use in large sized systems (height greater than 2 me-ters), optionally choice between an endless or with a clip. If an endless chain is chosen, there is the option to use chain counterweight.
Technical Description
Manufactured Dimensions
Maximum width Maximum height Comments
1,2 m 2,5 m Maximum manufacturable roller depends on the fabric selected
250Α System Dimensions
Description of parts
Roller blind Mechanism 250Α
Roller blind mechanism 25 mm plastic white.Clipped to mechanism brackets, white plastic with internal metal clutch spring.
Roller tube Roller blind tube 25 mm with adhesive tape.
Bottom rail Roller blind bottom rail round aluminium.
Bottom rail end cups Plastic Roller blind end cup
ChainWhite plastic, operating chain ball orMetal chain ball
4,5 cm
5,5 cm
Interior shading
Roller blind systems with a side chain or power operated mechanisms
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 250TRRoller blind mechanism translucent 250TR
Roller blind systems
Model 250TRRoller blind with translucent mechanism 250TR
• Translucent Roller blind mechanism click type 250TR. It has an integrated metal catch spring mechanism to lock the position and prevent unwanted roll down of the roller without the use of the chain. Translucent plastic brackets, with the option to install on walls or ceilings.
• If the installation of the plastic brackets is impeded by the nature of the wall or ceiling surface, or in the case of larger sized systems, it is possible to use white extruded aluminium profile to install the mechanism. In this case, white metal brackets are used. The number of brackets is determined by the width of the system.
• Aluminium roller tube has a diameter of 25mm, and uses adhesive tape to secure the fabric.
• The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube, with a special groove for insertion of the dowel rod.
• Plastic round end cups for bottom rail, provided for dec-orative purposes.
• Translucent plastic operation chain ball, or optionally, metal chain ball, mainly for use in large sized system (height greater than 2m). Optionally choice of an endless cord chain with clip. If endless chain is chosen, there is the option to use a chain counterweight.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
1,2 m 2,5 m Maximum manufacturable roller depends on the fabric selected
250TR System Dimensions
Description of parts
Roller blind Mechanism 250TR
Roller blind mechanism click type translucent
Roller tube Roller blind tube, 25mm, with adhesive tape.
Bottom rail Roller blind bottom rail round Aluminium
Bottom rail endcups Plastic Roller blind end cup
Chain Translucent operating chain ball.
4,5 cm
5,5 cm
Interior shading
Roller blind systems with a side chain or power operated mechanisms
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 250MRoller blind mechanism metal 250Μ
Roller blind systems
Model 250MRoller blind with metal mechanism 250Μ
• Metal silver or bronze colour roller blind mechanism (4.5x5.5 cm) with chain, type 250Α.It has a position catch and release system, in order to fa-cilitate easy installation on the brackets. Metal brackets in silver or bronze, with the option to install on walls or ceilings.
• The aluminium roller tube has a diameter of 25mm, and uses adhesive tape to secure the fabric.
• The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube with a special groove for insertion of the dowel rod.
• Plastic round end cups for bottom rail provided for deco-rative purposes.
• Metal operation chainball. Optionally choice of endless cord chain with clip. If endless chain is chosen, there is the option to use a chain counterweight.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
1,2 m 2,5 m Maximum manufacturable roller depends on the fabric selected
250M System Dimensions
Description of parts
Roller blind Mechanism 250M
Easy operation metal mechanism and brackets, in silver, grey or bronze
Roller tube Roller blind tube 25mm, with adhesive tape
Bottom rail Roller blind bottom rail round Aluminium
Bottom rail end cups Plastic Roller blind end cup
Chain Metal operating chain ball
4,5 cm
5,5 cm
Interior shading
Roller blind systems
Model 320ARoller blind mechanism plastic white 320A
Roller blind systems with a side chain or power operated mechanism
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 320ARoller blind with plastic mechanism 320A
31m
m65
mm
15mm
53mm
53m
m31
mm
65mm
15mm 21mm14mm
74mm
51m
m
15mm
31m
m
1
51mm
74m
m
15mm
31m
m
14mm 21mm
System 45®
31m
m65
mm
15mm
53mm
53m
m31
mm
65mm
15mm 21mm14mm
74mm
51m
m
15mm
31m
m
1
51mm
74m
m
15mm
31m
m
14mm 21mm
System 45®
Description of parts
Roller blind mechanism 320A
White plastic roller blind mechanism with slots for installation on its brackets, with internal metal spring.
Roller tube Roller blind tube 32mm.
Bottom rail Roller blind bottom rail 22mm round aluminium.
Bottom rail end cups Plastic roller blind end cups, in white or grey.
ChainWhite plastic, operating chain ball or Metal chain ball
Brackets White metal wall or ceiling brackets.
• White plastic roller blind mechanism (5.5x5.5 cm) with chain, click type 320Α. It has an integrated metal clutch spring mechanism to lock the position and prevent un-wanted roll down of the roller without the use of the chain.
The brackets are white metal, with the option to install on walls or ceilings.
• The aluminium roller blind tube has a diameter of 32 mm with a special groove for insertion of the dowel rod to hold the fabric in place.
• The bottom rail, is used as counterweight to keep the fabric stretched. Anodized silver aluminium tube, with a special groove for insertion of the dowel rod.
• White or grey plastic bottom rail end cups are supplied for decorative purposes.
• White plastic chain ball, or optionally metal chain ball, mainly for use of large sized systems (height greater than 2 meters), as well as a choice between an endless chain or with a clip. If an endless chain is chosen, there is the option to use a chain counterweight.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2 m 3 mThe maximum manufacturable roller depends on the fabric selected
320A System Dimensions
Expansion brackets
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 320ACRoller blind with colored plastic mechanism 320AC
Roller blind systems
Model 320ACRoller blind with side colored chain mechanism 320AC
• Colored plastic roller blind mechanism (4.5x5.8 cm) with chain type 320ΑC and special slots for safe installa-tion in brackets.It has an integrated sliding position guide to facilitate easy installation. Brackets are coloured plastic, with the option to install on walls or ceilings.
• The aluminium roller blind tube has a diameter of 32 mm.
• The bottom rail, is used as counterweight to keep the fabric stretched is 22mm aluminium tube, with a special groove for insertion of the dowel rod.
• The bottom rail endcups are round, made of white or grey plastic, for decorative purposes.
• Plastic chain ball, in the same color as the mechanism.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2 m 3 m Maximum manufacturable roller depends on the fabric selected
320AC System Dimensions
Description of parts
Roller blind mechanism 320AC
Colored plastic roller mechanism, available in 7 colors
Roller tubeRoller blind aluminium tube, 32mm diameter, with slots and special groove.
Bottom rail Roller blind bottom rail, round aluminium tube, 22mm, with slots.
Bottom rail end cups Plastic bottom rail end cups, in white or grey.
Chain Colored, plastic chain ball. Available in 7 colors
Brackets Plastic wall or ceiling brackets, 45x58mm, in 7 colors
5.8 cm
4.5 cm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 360BRoller blind with battery mechanism 360B
Roller blind systems
Model 360BRoller blind with battery mechanism 360B
• The electric battery operated 360B roller blind system uses the latest technology tubular motor 12V, wired con-nection or wireless motion control (RTS), also compatible with automation systems.Battery motor rolls up or locks the system in the desired position.
• Radio technology by Somfy is used for wireless motion control. There is an option to operate one or all the sys-tems on a single frequency.
• Mechanism brackets are metal, 6x4cm, with the option to install on walls or ceilings.The aluminium fabric roller tube has a diameter of 36mm.
• The fabric is secured with double-sided adhesive tape.
• The bottom rail, is used as a counterweight to keep the fabric stretched, is a 22mm aluminium tube, with a spe-cial groove for insertion of the dowel rod.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2.3 m 3 m Maximum manufacturable roller depends on the fabric selected
360B System Dimensions
Description of parts
Battery motor mechanism 360B
Battery motor 12V with adapter ring by Somfy. Wired connection or wireless controlled motor.
Roller tube Roller blind aluminium tube, 32mm, with special slots.
Bottom rail Roller blind bottom rail, 22mm in diameter, with slots.
Bottom rail end cups Round plastic end cups, in white or grey.
Brackets Metal wall or ceiling brackets, 40x60mm
Battery case Metal battery case, 8 AA batteries
60 cm
40 cm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 400HRoller blind power operated mechanism 400H
Roller blind systems
Model 400HRoller blind power operated mechanism 400H
• The motorized 400H system uses a tubular motor 220V, with wired connection or wireless motion control (RTS) and it is also compatible with automation systems. Motorized operation rolls up or locks the system in the desired position.
• Radiotechnology by Somfy is used for the wireless mo-tion control. There is an option to operate one or all the systems on a single frequency.
• Brackets are plastic, with the option to install on walls or ceilings.
• The aluminium fabric roller tube has a diameter of 60mm.
• The bottom rail, which acts as a counterweight to keep the fabric stretched, is a 22mm anodized silver alumini-um tube, with special slots.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2,3 m 3,0 m Maximum manufacturable roller depends on the fabric selected
400H System Installation Dimensions
Description of parts
Motorized Mechanism 400H
Motorized roller mechanism by Somfy with adapter ring. Wired con-nection or wireless controlled motor.
Roller tube Roller blind tube, 40mm.
Bottom rail Roller blind bottom rail, 22mm, with slots.
Bottom rail end cups Round plastic end cups, in white or grey.
Brackets Plastic wall or ceiling brackets, 50x75mm.
50 cm
75 cm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 430ACRoller blind with plastic colored mechanism 430AC
Roller blind systems
Model 430ACRoller blind with plastic colored mechanism 430AC
• Coloured plastic Roller blind mechanism (6.0x7.4 cm) with chain, click type 430ΑC, with special slots for safe installation on brackets.It has an integrated sliding position guide to facilitate easy installation.Available with additional supporting spring, for easy op-eration with large sized rollers.Brackets are coloured plastic, with the option to install on walls or ceilings.
• The aluminium head rail tube has a diameter of 32 mm.
• The bottom rail anodized silver aluminium tube, which acts as a counterweight to keep the fabric stretched, with a special groove for insertion of the dowel rod.
• Plastic white or grey bottom rail endcups, for decorative purposes.
• Plastic ball chain, in the same color as the mechanism.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2.4 m 4 m Maximum manufacturable roller depends on the fabric selected
430AC System Dimensions
Description of parts
Roller blind mechanism 430AC
Sliding attachment to brackets, plastic, available in 7 colors
Roller tubeAluminium tube, 43mm in diameter, with slots and special groove for insertion of dowel rod.
Bottom rail Anodized silver aluminium tube, 22mm in diameter, with slots.
Bottom rail end cups Round plastic end cups, in white or grey.
Supplementary spring Spring support mechanism
ChainPlastic chain ball.Available in 7 colors
BracketsPlastic wall or ceiling brackets, 60x74mm,in 7 colors
7.4 cm
6 cm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 450ARoller blind with plastic chain mechanism 450A
Roller blind systems
Model 450ARoller blind with chain mechanism 450A
• White plastic roller blind mechanism (8.5x5.8 cm) with chain, type 450Α, with special slots for safe installation in brackets. It has an integrated metal clutch spring mecha-nism to lock the position and prevent unwanted roll down of the roller without the use of the chain. White metal brackets, with the option to install on walls or ceilings.
• The aluminium blind roller tube has a diameter of 45 mm and has a special groove for insertion of the PVC dowel rod to hold the fabric in place.
• The bottom rail, which acts as a counterweight to keep the fabric stretched, is a 22mm diameter aluminium tube with special groove for insertion of the dowel rod.
• Plastic white or grey bottom rail end cups.
• White plastic chain ball or optionally metallic chain ball, mainly for use large sized rollers (height greater than 2 meters), as well as a choice between an endless chain or with a clip. If a continuous loop chain is chosen, there is the option to use a chain counterweight.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
3 m 4 m Maximum manufacturable roller depends on the fabric selected
450A System Dimensions
Description of parts
Roller blind mechanism 450AC
White plastic roller blind mechanism with slots for installation on its brackets with internal metal spring.
Rolling tube Roller blind tube, 45mm, with special slots.
Bottom rail Roller blind bottom rail 22mm round aluminium.
Bottom rail Endcups Plastic roller blind end cups, white or grey.
Chain White plastic, operating chain ball or metal chain optional.
Brackets White metal wall or ceiling brackets.
82m
m
15mm
85mm
72m
m31
mm
15mm
82mm
76mm
84m
m31
mm
21mm14mm
97mm
72m
m
15mm
31m
m
76mm
95m
m
31m
m
15mm14mm 21mm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 580ACRoller blind with plastic colored mechanism 580AC
Roller blind systems
Model 580ACRoller blind with plastic colored mechanism 580AC
• Coloured plastic Roller blind mechanism (8.0x9.5 cm) with chain, type 430ΑC, with special slots for safe instal-lation on brackets. It has an integrated sliding position guide to facilitate easy installation. Available with a spe-cial supplementary spring to support easy operation with large surface areas. Colored plastic brackets, with the op-tion to install on walls or ceilings.
• The aluminium roller blind tube has a diameter of 58 mm.
• The teardrop shaped aluminium bottom rail (8x30mm) acts as a counterweight to keep the fabric stretched, and contains a special groove for insertion of the dowel rod.
• Bottom rail end cups are available in white or grey plas-tic, for decorative purposes.• Plastic chain ball, available in the same colors as the mechanism.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
3.5 m 4.5 m Maximum manufacturable roller depends on the fabric selected
580AC System Dimensions
Description of parts
Roller blind mechanism 580AC
Colored plastic roller mechanism available.
Roller tubeRoller blind aluminium tube, 58mm, with supplementary supporting slots and special groove.
Bottom railSpecial teardrop shape bottom rail aluminium tube, 30x45mm, with special slot.
Bottom rail end cups Teardrop shaped end cups in white or grey.
ChainColored chain ball, plastic.Available in 7 colors
BracketsPlastic wall or ceiling brackets, 80Χ95mmAvailable in 7 colors
9.5 cm
8 cm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 580HCRoller blind power operated colored mechanism 580HC
Roller blind systems
Model 580HCRoller blind power operated colored mechanism 580HC
• Coloured plastic roller blind mechanism (8.0x9.5 cm) with chain, type 430ΑC, with special slots for safe instal-lation on brackets. It has an integrated sliding position guide to facilitate easy installation. Available with Somfy motor. Colored plastic brackets, with the option to install on walls or ceilings.
• The aluminium roller blind tube has a diameter of 58 mm with a special groove for insertion of a PVC dowel rod to hold the fabric in place.
• The teardrop shaped silver aluminium bottom rail (30x45mm) acts as a counterweight to keep the fabric stretched, and contains a special groove for insertion of the dowel rod.
• Bottom rail teardrop shape end cups are available in white or grey plastic, for decorative purposes.
• Plastic chain ball, available in the same colors as the mechanism.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
3.9 m 4.5 mThe maximum manufacturable roller depends on the fabric selected
580HC System Dimensions
Description of parts
Roller blind mechanism 580HC
Roller blind mechanism power operated, with special slots and metal ring to secure the motor. Available in 7 colors
Roller tubeRoller blind aluminium tube, 58mm, with supplementary supporting slots and special groove.
Bottom railSpecial teardrop shape bottom rial aluminium tube 30x45mm with special slot.
Bottom rail end cups Teardrop shaped plastic end cups, in white or grey.
9.5 cm
8 cm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 590MRoller blind with metal mechanism 590M
Roller blind systems
Model 590MRoller blind with metal mechanism 590M
• Metal motorized Roller blind mechanism (5.9x8.0cm) type 590M, click type available in white, silver, grey and bronze. It has a position catch and release system, in or-der to facilitate easy installation on brackets. The metal brackets are also available in white, silver, grey or bronze with the option to install on walls or ceilings.
• The aluminium roller blind tube has a diameter of 42mm.
• The rectangular anodized silver aluminium bottom rail (1,5x3,5mm) acts as a counterweight to keep the fabric stretched and with a special groove for insertion of the dowel rod.
• Translucent plastic bottom rail end caps for decorative purposes.
• Metal operation chain ball. Optionally choice of endless cord chain with clip if endless chain is chosen there is the option to use a chain counterweight.
• The system is available with intermediate brackets for group operation of up to three roller blinds using a single mechanism. Their maximum total dimensions should not exceed the maximum dimensions for a single system in the specific fabric category.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
3.0 m 3.0 m Maximum manufacturable roller depends on the fabric selected
590M System Dimensions
Description of parts
Roller blind mechanism 590M
Easy operation metal mechanism, in white, silver, grey or bronze.
Roller tube Roller blind aluminium tube, 42mm with adhesive tape.
Bottom railRectangular aluminium tube, cross section 15x35, with special groove.
Bottom rail end cups Rectangular plastic end cups.
Chain Silver metal bead chain ball type.
Brackets Metal wall or ceiling brackets, 80x59, in white, silver, grey or bronze.
Intermediate bracketIntermediate brackets, 80x59, for group operation of up to three roller blinds using a single mechanism.
5.9 cm
8 cm
Interior shading
Roller blind systems with a side chain or power operated mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 590TRRoller blind with translucent mechanism 590TR
Roller blind systems
Model 590TRRoller blind with translucent mechanism 590TR
• Translucent roller blind mechanism (5.9x8.0cm) 590TR click type, with position catch and release system to fa-cilitate easy installation on brackets. Brackets are also translucent plastic, with the option to install on walls or ceilings.
• The aluminium roller blind tube 42mm uses adhesive tape to secure the fabric.
• The anodized silver aluminium bottom rail, used as a counterweight to keep the fabric stretched, is rectangu-lar, 1.5x3.5mm cross section, with a special groove for insertion of the dowel rod.
• The translucent plastic bottom rail end caps, are for decorative purposes.
• Translucent acrylic chain ball.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
3.0 m 3.0 mThe maximum manufacturable roller depends on the fabric selected
590TR System Dimensions
Description of parts
Roller blind mechanism 590TR
Roller blind translucent mechanism click type internal metal clutch spring.
Roller tube Roller blind tube aluminium tube, 42mm with adhesive tape.
Bottom railRoller blind bottom rail rectangular aluminium tube15x35mm, with special groove.
Bottom end cups Rectangular plastic end cups, in white or grey.
Chain ball Translucent operating chain ball.
5.9cm
8 cm
Interior shading
Roller blind systems with side chain or power mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 590HRoller blind power operated metal mechanism 590H
Roller blind systems
Model 590HRoller blind with power operated metal mechanism 590H
Description of parts
Bearing PinPlastic component for attaching the end plug to the system brackets.
End plug Plastic component to secure the motor to the tube.
Roller tube Aluminium tube, 42mm with adhesive tape.
Bottom rail Rectangular aluminium tube, 15x35mm, with special groove.
Bottom end cups Rectangular plastic counterweight end cups, in white or grey.
Brackets Metal wall or ceiling brackets, 80x59, in white, silver, grey or bronze.
• Metal motorized roller mechanism (5.9x8.0cm) 590H, click type available in white, silver, grey and bronze. It has a position catch and release system, in order to facilitate easy installation on the brackets. The metal brackets are available in white, silver, grey and bronze with the option to install on walls or ceilings.
• The system operates with wireless motion control and tubular motor 220V. Wireless commands are given by re-mote control; synchronization and the determination of limits is automatically set at startup. There is an option to remotely operate, more than one system (or group of systems) using a single remote control device (not com-patible with automations).
• The aluminium roller tube 42mm uses adhesive tape to secure the fabric.
• The aluminium bottom rail (undressed), used as a counterweight to keep the fabric stretched, is rectangu-lar, 1.5x3.5mm, with a special groove for insertion of the dowel rod.
• The translucent plastic bottom rail end caps, have a decorative purpose.
• The system is available with intermediate brackets for group operation of up to three roller blinds using a single mechanism. Their maximum total dimensions should not exceed the maximum dimensions for a single system in the specific fabric category.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
3.0 m 3.0 mThe maximum manufacturable roller depends on the fabric selected
590H System Dimensions
5.9 cm
8 cm
Interior shading
Roller blind systems with side chain or power mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 600HRoller blind power operated mechanism 600H
Roller blind systems
Model 600HRoller blind power operated mechanism 600H
• The motorized 600H system uses a tubular motor 220V, with wire connection or wireless motion control (RTS) and it is also compatible with automation systems.
• Motorized operation rolls up or locks the system in the desired position.
• Radio technology by Somfy is used for wireless motion control. There is an option to operate one or all the sys-tems on a single frequency.
• Brackets are metal, with the option to install on walls or ceilings.
• Aluminium roller blind tube 60mm.
• The teardrop shaped silver aluminium bottom rail (30x45mm) acts as a counterweight to keep the fabric stretched, and contains a special groove for insertion of the dowel rod.
• Bottom rail teardrop shape end cups are available in white or grey plastic, for decorative purposes.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
3.5 m 4.5 m Maximum manufacturable roller depends on the fabric selected
600H System Dimensions
Description of parts
Roller blind mechanism 600H
Motorized roller mechanism by Somfy with adapter ring. Wired con-nection or wireless controlled motor.
Roller tubeAluminium roller tube, 60mm with a groove to hold fabric in place with hole disk.
Bottom railSpecial teardrop shape bottom rial aluminium tube 30x45mm with special slot.
Bottom rail end cups Teardrop shaped plastic end cups, in white or grey.
BracketsStrong galvanized metal brackets for wall or ceiling attachment, with three slots for more secure installation, and white plastic covers for brackets.
8 cm
10 cm
Interior shading
Roller blind systems with side chain or power mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 700HRoller blind power operated mechanism 700H
Roller blind systems
Model 700HRoller blind power operated mechanism 700H
• The motorized 700H system uses a tubular motor 220V, with wire connection or wireless motion control (RTS) and it is also compatible with automation systems.
• Motorized operation rolls up or locks the system in the desired position.• Radio technology by Somfy is used for wireless motion control.
There is an option to operate one or all the systems on a single frequency.
Brackets are metal, with the option to install on walls or ceilings.
• Aluminium roller tube 70mm.
• The bottom rail, which acts as a counterweight to keep the fabric stretched, is a special 22mm teardrop shaped aluminium tube, with dimensions of 30x45 and special groove.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
4.5 m 4.5 m Maximum manufacturable roller depends on the fabric selected
700H System Dimensions
Description of parts
Roller mechanism 700HMotorized roller mechanism by Somfy with adapter ring. Wired or wireless control motor.
Roller tubeAluminium roller tube, 70mm with a groove to hold fabric in place, with hole disk and special reinforcement slots.
Bottom railSpecial teardrop shape bottom rail aluminium tube, 30x45mm, with special slot.
Bottom rail end cups Teardrop shaped plastic end cups, in white or grey.
BracketsHeavy duty galvanized metal brackets for wall or ceiling installa-tion, with three slots for more secure, and white plastic covers for brackets.
11 cm
11 cm
Interior shading
Roller blind systems with side chain or power mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 860HRoller blind power operated metal mechanism 860H
Roller blind systems
Model 860HRoller blind with power operated metal mechanism 860H
• Motorized metal roller mechanism (8.5x11.0cm) 860H, click type available , in white, silver, grey and bronze, with position catch and release system to facilitate easy in-stallation on brackets. The metal brackets are available in white, silver, grey and bronze with the option to install on walls or ceilings.
• The system operates with wireless motion control and tubular motor 220V. The wireless command is given by a remote control; synchronization and the determination of limits are set automatically at startup. There is an op-tion to remotely operate more than one system (or group of systems) using a single remote control device (not compatible with automations).
• The aluminium fabric roller tube has a diameter of 65mm for widths of up to 4 meters and 85mm for widths above 4 meters, and has special slots to hold down fabric.
• The rectangular aluminium bottom rail (undressed) acts as a counterweight to keep the fabric stretched 1.5x3.5mm with a special groove for insertion of the dowel rod.
• The transparent plastic bottom rail end caps, have a decorative purpose.
• The system is available with intermediate brackets for group operation of up to three roller blinds using a single mechanism. Their maximum total dimensions should not exceed the maximum dimensions for a single system in the specific fabric category.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
5.1 m 4.5 m Maximum manufacturable roller depends on the fabric selected
860H System Dimensions
Description of parts
Motor adaptor Plastic component for attachment of the motor to the tube.
Bearing pin Plastic component for attaching the end plug to the system bracket
End plug Plastic component to secure the motor to the tube (plug)
Roller tubeAluminium fabric roller tube, 65mm in diameter, or 85mm for sys-tems with widths of 4 meters and above, with an groove to hold fabric securely, with special reinforcement slots.
Bottom rail Rectangular aluminium tube, 15x35, with special groove.
Bottom rail end cups Rectangular plastic counterweight end plug in white or grey.
BracketsMetal wall or ceiling brackets, 110x85mm, in white, silver, grey or bronze.
8.5 cm
11 cm
Interior shading
Roller blind systems with side chain or power mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 210.0, 210.1, 210.2Double roller blind with chain mechanism, free hanging,steel wire or extruded aluminium profile guides.
Roller blind systems
Model 210.0, 210.1, 210.2Double roller blind with chain mechanism, free hanging, steel wire or extruded aluminium profile guides.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
1,5 m 2,2 m Maximum manufacturable roller depends on the fabric selected
Model 210.0, 210.1, 210.2 Dimensions
Description of parts
Manual roller mechanism Plastic chain roller mechanism, clipped to the system brackets.
Roller tubeAluminium tube, 27mm and 32mm diameter, with special reinforce-ment slots.
Bottom railRectangular aluminum tube, with special groove for insertion to secure fabric in position.
Bottom rail end cups Rectangular plastic end cups, with white or grey covers.
Chain Plastic chain ball, in white or grey.
Brackets Side cups for retaining mechanism and cassette
Steel wire guide set Plastic side guide (perlon) with special installation bracket
Extruded aluminium profile guide
Double extruded aluminium profile side guide Π shaped
• Double roller with chain roller mechanism and alumini-um profile cassette (7.2x9.6cm), type R210.The cassette is available in anodized aluminium or RAL color and has special profile side caps, in grey, black or white.
• The system moves both fabrics using two roller mecha-nisms operated with chains installed left or right inside the cassette.
• Roll tubes of 27 and 32 mm. The fabric is secured to the tubes with special double sided adhesive tape.
• The aluminium bottom rail (undressed), used as a counterweight to keep the fabric stretched, is rectangu-lar with a special groove for insertion and securing of the fabric in position.
• The plastic bottom rail end caps are for decorative pur-poses.
• The system is available with side guides, either double aluminium profile, Π shaped, or wire guides made of per-lon.
Interior shading
Roller blind systems with side chain or power mechanism.
Optima roller blind shading systems are a particu-larly popular and economical choice for interior and exterior shading and decoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and colors, using either manually or power operated mechanisms.
Roller blind systems
Model 230.0, 230.1, 230.2Double motorized roller blind with 24V mechanism, free hanging, steel wire or extruded aluminium profile guides.
Roller blind systems
Model 230.0, 230.1, 230.2Double motorized roller blind with 24V mechanism, free hanging, steel wire or extruded aluminium profile guides.
Technical Description Model 230.0, 230.1, 230.2 Dimensions
Description of parts
Roller mechanism 230.0Motorized roller mechanism by Somfy with adapter ring. Wired con-nection or wireless controlled motor.
Roller tubeAluminium fabric roller tube, 32mm diameter, with special reinforce-ment slots.
Bottom railRectangular aluminum tube, with special groove for insertion to secure fabric in position.
Bottom rail plugs Rectangular plastic end cups, with white or grey covers.
Brackets Side cups for retaining mechanism and cassette
Steel wire guide set Plastic side guide (perlon) with special installation bracket.
Extruded aluminium profile guide
Double extruded aluminium profile side guide, Π shaped
• Double roller with chain roller mechanism and alumini-um profile cassette (7.2x9.6cm), type R230. The cassette is available in anodized aluminium or RAL color and has special profile side caps, in grey, black or white.
• The system moves both fabrics using two tubular mo-tors 24V, wired connection or wireless motion control, and are also compatible with automation systems. Motorized operation rolls up or locks the fabric in the desired posi-tion. Radio technology by Somfy can be used for wireless motion control. There is an option to operate one or all the systems on a single frequency.
• The fabric rolling tubes have a round cross-section and a 32mm diameter. The fabric is affixed to the tubes with special double sided adhesive tape.
• The aluminium bottom rail (undressed), used as a counterweight to keep the fabric stretched, is rectangu-lar with a special groove for insertion and securing of the fabric in position.
• The plastic bottom rail end caps are for decorative pur-poses.
• The system is available with side either guides, either double aluminium profile, Π shaped, or wire guides made of perlon.
Διαστάσεις Κατασκευάσιμες
Model Maximum widthMaximum height
Comments
230.0 2,1 m 2,2 m
Maximum manufacturable roller depends on the fabric selected.230.1 1,5 m 2,2 m
230.2 1,5 m 2,2 m
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS245Cassette roller blind with chain mechanism CAS245
Roller blind systems
Model CAS245Cassette roller blind with chain mechanism CAS245
Description of parts
Roller blind mechanism CAS245
Roller blind chain mechanism adapted to the brackets, made of high strength plastic.
Cassette (45x51)Aluminium cassette, square 45x51mm special support grooves. It has a brush strip to ensure smooth unhindered rolling and reeling of the fabric.
Roller tube Aluminium tube, 23mm with adhesive tape to secure the fabric.
Bottom rail Rectangular 8x30mm aluminum tube, with special groove.
Side guide Plastic (perlon) side cable guide rail with fixing brackets.
Aluminium (profile) guidesSide guide aluminium profile, Π shaped 40x13.Mounting may be on the wall or in a recess.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
1.2 m 2.6 mThe maximum manufacturable roller depends on the fabric selected
Model CAS245 Dimensions
Side guides
• Cassette roller system with square 45x51mm, type CAS245, with chain roller mechanism adapted to its brackets. Metal system parts are available in anodized RAL colors. The plastic system parts are unpainted and are available in white, grey, black or bronze.
• Aluminium roller tube has 23mm with adhesive tape to secure the fabric.
• The aluminium bottom rail (undressed), used as a counterweight to keep the fabric stretched, is rectangu-lar, 8x30mm, with a special groove for insertion of the fabric rod.
• The bottom rail endcups are made of plastic, with deco-rative use when the system has no guide rails. They are also used for "guiding" the bottom rail along the side guide rails when the system includes them.
• The system is available with aluminium profile guide rails, 40x13, or perlon cable guides.
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS445Cassette roller blind power operated mechanism CAS445
Roller blind systems
Model CAS445Cassette roller blind power operated mechanism CAS445
• Roller cassette roller system 45x51mm, type CAS445, power operated mechanism adapted to its brackets.
• The metal parts of the system are available in anodized RAL colors. The plastic parts of the system can not be paint and are available in white, grey, black and bronze.
• The system operates with tubular motor 24V, wire or wireless motion control. Radiotechnology by Somfy is used for the wireless motion control. There is the option of operating one or all the systems with one frequency.
• The roller tube has a diameter of 23mm, is made of alu-minium and has adhesive tape for securing the fabric.
• The bottom rail (undressed), is used as a counterweight to keep the fabric stretched, is rectangular, 8x30mm, made of aluminium, with a special groove for insertion of the dower rod.
• The bottom rail endcups, made of plastic, with decora-tive use when the system has no side guides. They are also used for "guiding" the bottom rail along the side guides when the system includes them.
• The system is available with aluminium profile guides, 40x13, or cable guide made of perlon.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
1.2 m 2.6 mThe maximum manufacturable roller depends on the fabric selected
Model CAS445 Dimensions
Description of parts
Motor 24VElectrically operated roller mechanism with motor and adapter ring. by Somfy Wire or wireless control.
Cassette (45x51)Aluminium cassette, square 45x51mm with special support grooves. It has a brush strip to ensure smooth unhindered rolling and reeling of the fabric.
Roller tube Aluminium tube, 23mm with adhesive tape for securing the fabric.
Bottom rail Rectangular aluminium tube, 8x30mm, with special groove.
Side guide Plastic (perlon) side guide with fixing brackets.
Aluminium guides rails (profile)
Side guide aluminium profile, Π shaped 40x13.Mounting may be on the wall or in a recess.
Side guides
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS265Casette roller blind with chain mechanism CAS265
Roller blind systems
Model CAS265Casette roller blind with chain mechanism CAS265
• Cassette roller system with square 65x74.3mm type CAS265, with chain roller mechanism adapted to its brackets.
• The metal parts of the system are available in anodized or RAL colors. The plastic parts of the systems can not be paint and are available in white, grey, black and bronze.
• Roller 40mm, is made of aluminium and has adhesive tape for securing the fabric.
• The bottom rail (undressed), which is used as a coun-terweight to keep the fabric stretched, is rectangular, 8x30mm, made of aluminium, with a groove for insertion of the dowel rod.
• The bottom rail endcups made of plastic, with decorative use when the system has no side guide rails but are also used for "guiding" the bottom rail along the side guides when the system includes them.
• The system is available with aluminium profile guides, 55x13, with 50-65X19 and 65-80x19 profile or cable guides made of perlon.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2.7 m 4.10 mThe maximum manufacturable roller depends on the fabric selected
CAS265 System Dimensions
Description of parts
Roller blind mechanism CAS265
Roller blind mechanism adapted to the brackets, made of high resis-tance plastic.
Cassette (65x74.3)
Aluminium cassette, square 65χ74.3mm, with special support grooves.It has a brush strip for the unhindered and smooth rolling and reeling of the fabric.
Roller tube Aluminium tube, 40mm with adhesive tape to secure the fabric.
Bottom rail Rectangular aluminium tube, 8x30mm, with special groove.
Side guides Plastic (perlon) side guide with fixing brackets.
Aluminium guide rails (profile)
Side guide aluminium profile Π shaped 40x13.They are also available with special slot, that adjusts the profile from 50x19 up to 80x19 Mounting may be on the wall, but also in a recess.
Side guides
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS465Cassette roller blind poweroperated mechanism CAS465
Roller blind systems
Model CAS465Cassette roller blind power operated mechanism CAS465
• Roller cassette roller system 65x74.3mm, type CAS245, power operated mechanism adapted to its brackets.
• The metal parts of the system are available in anodized or RAL colors. The plastic parts of the system can not be paint and are available in white, grey, black and bronze.
• The system operates with tubular motor 220V, wire or wireless motion control. Radiotechnology by Somfy is used for the wireless motion control.There is the option of operating one or all the systems with one frequency.
• The roller tube has a diameter of 40mm, is made of alu-minium and has adhesive tape to secure the fabric.
• The bottom rail (undressed), is used as a counterweight to keep the fabric stretched, is rectangular, 8x30mm, made of aluminium, with a special groove for insertion of the dowel rod.
• The bottom rail endcups, are made of plastic, with deco-rative use when the system has no side guides but are also used for "guiding" the bottom rail along the side guides when the system includes them.
• The system is available with aluminium profile guides, 55x13, adjustable with 50-65X19 and 65-80x19 or cable guides made of perlon.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2.7 m 4.10 mThe maximum manufacturable roller depends on the fabric selected
Model CAS465 Dimensions
Description of parts
Motor Electrically operated roller mechanism with motor and adapter ring by Somfy. Wire or wireless motor control.
Mechanism cassette (65x74.3)
Aluminium cassette, square 65x74.3mm, with special support grooves. It has a brush strip to ensurance and smooth rolling and reeling of the fabric.
Rolling tube Aluminium tube, 40mm with adhesive tape for securing the fabric.
Bottom rail Rectangular shape aluminum tube, 8x30mm, with special groove.
Side guide Plastic (perlon) side guide with fixing brackets.
Aluminium guides (profile)
Side guide aluminium profile, Π shaped 40x13.They are also available with a special slot, that adjusts the profile from 50x19 up to 80x19. Mounting may be on the wall, but also in a recess.
Side guides
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS275Round cassette roller with chain mechanism CAS275
Roller blind systems
Model CAS275Round shaped cassette roller with chain mechanism CAS275
• Internal round shaped cassette roller system, 75mm type CAS275, with chain roller mechanism adapted to its brackets.
• Metal parts are available in nikel colors (chrome). Plas-tic parts can not be paint and are available in white and grey.
• Aluminium roller of 23mm and with grooves to secure the fabric.
• The rectangular aluminium bottom rail (8x30mm) acts as a counterweight to keep the fabric stretched, and con-tains a special groove for insertion of the dowel rod.
• The plastic bottom rail endcups have a decorative pur-pose.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2.9 m 4.10 mThe maximum manufacturable roller depends on the fabric selected
CAS275 Dimensions
Description of parts
Roller mechanism CAS275 Heavy duty plastic roller mechanism adapted to the brackets.
Round shaped cassette (Φ75)
Round shaped aluminium cassette, 75 mm special slots for the inser-tion of brackets.
Roller tube Aluminium roller tube, 36mm with groove to fully secure the fabric.
Bottom rail (teardrop shaped)
Teardrop shape aluminium tube, 30x45mm with special groove.
Interior and Exterior shading
Roller blind systems
Model CAS475Round shaped cassette roller power operatedmechanism CAS475
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to you space and contribute significantly towards energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS475Round shaped cassette rollerpower operated mechanism CAS475
• Internal round shaped cassette roller system, 75mm type CAS275, with motor. The metal parts are available in nikel colors (chrome). The plastic parts can not be paint and are available in white and grey.
• The system operates with tubular motors 220V, wire or wireless motion control. Radiotechnology by Somfy is used for the wireless motion control. There is the option of operating one or all the systems with one frequency.
• The aluminium roller tube has a diameter of 36mm and carries special grooves to secure the fabric.
• The teardrop shaped aluminium bottom rail (30x45mm) acts as a counterweight to keep the fabric stretched and has a special groove for insertion of the dowel rod.
• The plastic bottom rail endcups, , have a decorative purpose.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
2.4 m 4 mThe maximum manufacturable roller depends on the fabric selected
CAS475 Dimensions
Description of parts
MotorElectrically operated roller mechanism with motor and adapter ring by Somfy. Wire or remote motor control.
Round shape cassette mechanism (Φ75)
75Φ mm diameter round aluminium cassette mechanismwith special slots for insertion of brackets.
Roller tubeAluminium roller tube, 36mm diameter, with groove for securely holding the fabric.
Bottom rail Teardrop shaped aluminium tube, 30x45mm, with special groove.
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
The Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to you space and contribute significantly towards energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS2115Cassette roller with chain mechanism CAS2115
Roller blind systems
Model CAS2115Cassette roller blind with chain mechanism CAS2115
• Cassette roller system 45x51mm, type CAS245, with chain roller mechanism adapted to its brackets. The met-al parts of the system are available in anodized or RAL colors. The plastic parts of the systems can not be paint and are available in white, grey, black and bronze.
• The fabric roller tube has a diameter of 50mm, is made of aluminium with adhesive tape to secure the fabric.
• The bottom rail (undressed), which is used as a coun-terweight to keep the fabric stretched, is rectangular, 12x42mm made of aluminium, with a special groove for insertion of the dowel rod.
• The bottom rail endcups, are made of plastic, with deco-rative use when the system has no guides but are also used for "guiding" the bottom rail along the side guides when the system includes them.
• The system is available also with aluminium profile guides, 55x13, adjusted with 50-65X19 and 65-80x19 profile or cable guides made of 4mm steel.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
4.1 m 4.10 mThe maximum manufacturable roller depends on the fabric selected
Model CAS2115 Dimensions
Description of parts
Roller mechanism CAS2115 Heavy duty plastic roller mechanism adapted to the bracket.
Mechanism cassette (115X131.5)
Aluminium cassette, square 65x74.3mm, with special support grooves. It has a brush strip to ensure smooth unhindered rolling and reeling of the fabric.
Roller tubeAluminium roller tube, 50mm diameter, with groove to securely hold the fabric.
Bottom rail Teardrop shaped aluminium tube, 30x45mm, with special groove.
Side guide rail Side guide of 4mm steel with brackets for fixing on the system.
Side guides
Side guides aluminium profile guide, Π shaped 40x13.It is also available with a special slot, that adjuststhe profile from 50x19 up to 80x19.Mounting may be on the wall, but also in a recess.
Side guides
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS4115Cassette roller blind power operated mechanism CAS4115
Roller blind systems
Model CAS4115Cassette roller blind power electrically operated mechanism CAS4115
• Cassette roller system 45x51mm type CAS445, with motorized roller mechanism adapted to its brackets. Met-al system parts are available in anodized or RAL colors.
• The plastic parts of the systems can not be paint and are available in white, grey, black and bronze.
• The system operates with tubular motor 220V, wire or wireless motion control. Radiotechnology by Somfy is used for the wireless motion control. There is the option of operating one or all the systems with one frequency.
• The roller tube has a diameter of 50mm, is made of alu-minium and has adhesive tape for holding the fabric.
• The bottom rail (undressed), which is used as a coun-terweight to keep the fabric stretched, is rectangular 12x42mm, made of aluminium, with a special groove in-sertion of the dowel rod.
• The bottom endcups are made of plastic, with decora-tive use when the system has no guides but are also used for "guiding" the bottom rail along the side guides when the system includes them.
• The system is available also with aluminium profile guides, 55x13, adjusted with 50-65X19 and 65-80x19 profile or cable guides made of 4mm steel.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
4.1 m 4.10 mThe maximum manufacturable roller depends on the fabric selected
CAS4115 System Dimensions
Description of parts
Motor Electrically operated roller mechanism with motor and adapter ring by Somfy. Wire or wireless control.
Mechanism cassette (115X131.5)
Aluminium cassette, square 115x131.5mm, with special support grooves. It has a brush strip to ensure smooth unhindered rolling and reeling of the fabric.
Roller tubeAluminium roller tube, 50mm diameter, with groove for securely holding the fabric.
Bottom rail Teardrop shape aluminium tube, 30x45mm, with special groove.
Side guide Side cable guide of 4mm steel with special fixing bracket.
Aluminium guides (profile)Side guide aluminium profile, Π shaped 40x13. They are also available with a special slot, that adjusts the profile from 50x19 up to 80x19. Mounting may be on the wall, but also in a recess.
Side guides
Interior and Exterior shading
Roller blind systems with a side chain or power oper-ated mechanism.
Optima cassette roller systems are a particularly popular and economical choice for interior and exte-rior shading and décoration.Simple and contemporary, they add a special touch to your space and contribute significantly to energy saving.They are available in a large variety of fabrics and col-ors with manually or power operated mechanisms.
Roller blind systems
Model CAS4130Round cassette roller power operated mechanism CAS4130
Roller blind systems
Model CAS4130Round cassette roller power operated mechanism CAS4130
• Round external cassette roller system, 130mm diam-eter, type CAS4130, with motorized roller mechanism adapted to its brackets. The metal parts of the system are available in white, grey and with anodizing processing.The plastic parts of the systems can not be paint and are available in white and grey.
• The system operates with tubular motor 220V, wire or wireless motion control. Radiotechnology by Somfy is used for the wireless motion control.There is the option of operating one or all the systems with one frequency.
• The aluminium fabric roller tube has a diameter of 70mm and carries special grooves to fully secure the fabric.• The bottom rail which is used as a counterweight to keep the fabric stretched, is round 46mm diameter, made of aluminium, with a special groove for insertion of the dowel rod.
• The plastic bottom rail endcups have apertures de-signed to "guide" the bottom rail up and down the length of the side guide rails.
• The system is only available with 7mm steel cable guides with fixing brackets.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Comments
4.7 m 5.10 mThe maximum manufacturable roller depends on the fabric selected
CAS4130 Dimensions
Description of parts
MotorElectrically operated roller mechanism with motor and adapter ring by Somfy. Wire or wireless control.
Mechanism cassette (65x74.3)
Round aluminium cassette, diameter 130 mm, with special grooves for installation of mechanism side brackets.
Roller tubeAluminium roller tube,70mm diameter, with groove for securely holding the fabric.
Bottom railRound aluminium tube, 46mm, with fitted endcups that are guided on the side steel wire guide rail.
Cable guide rail (perlon) Side cable guide of 4mm steel with special fixing brackets.
Interior shading
Perfect Fit blind systems
Perfect roller blind, manualFit PFR-M with spring mechanism
Perfect Fit® is an ideal option for UPVC windows and doors.
This system allows perfect installation for most double glazed windows and doors, with no need to drill holes in the frame!Tilt and turn windows or doors present no problem either, since the system moves together with the window or door.
Perfect Fit blind systems
Perfect Fit PFR-M roller blind, manualwith spring mechanism Description of parts
1. FrameAluminium (38x26mm) available in four colors. White, silver, brown and oak.
2. Headrail (spring mecha-nism cover)
Aluminium mechanism cover, available in four colors. White, silver, brown and oak.
3. Plastic corner joints Plastic corner joints for mounting frame and mechanism.
4.Mechanism Spring mechanism with special slots for mounting on the corner joint.
5. Bottom rail Aluminium bottom rail for securing fabric and operating system.
6. End cups Bottom rail plastic plugs to lock the bottom rail in position as desired.
7. Fixing corners Mounting frame fixing corner brackets
• The system frame is aluminium, 38x26mm, for guiding and securing fabric in the desired position during unroll-ing (opening of the system by the user).
• The frame is available in four colors: white, silver, brown and oak.
• The frame is held by special plastic corner joints (50x55mm), which are covered for reasons of uniformi-ty with plastic 43x43mm caps. The corners and caps are available in the same colors as the aluminium parts.
• The frame system is installed at the window with the assistance of special fixing corners, available in three sizes, depending on the depth of the glazing recess. The dimensions of the fixing corners are:30x26, 30x29 and 30x32 mm for glazing recesses 18, 20 and 22 mm respectively.
• It has a spring roller mechanism, with special slots for safe installation at the special corner joints of the frame.
• The roller tube has a diameter of 23 mm and is made of aluminium and has a special groove for insertion of the dowel rod to hold the fabric in place.
• The bottom rail, with a rectangular cross-section, is used to hold the fabric, and the user can Roll up and down the system using the embedded handle.
• Plastic bottom rail end cups are used so that the bottom rail can be locked in the desired position by the user.
Technical Description PFR-M System Dimensions
Dimensions that can be manufactured
Maximum width Maximum height Maximum surface area Comments
1,4 2,0 2.8 m2
the maximum and minimum dimensions that can be manufactured depend on the thickness of the fabric.
Interior shading
Perfect Fit blind systems
Perfect Fit PFR-M pleated, manualoperated with handle
Perfect Fit® is an ideal option for UPVC windows and doors.
This system allows perfect installation for most double glazed windows and doors, with no need to drill holes in the frame!Tilt and turn windows or doors present no problem either, since the system moves together with the window or door.
Perfect Fit blind systems
Perfect Fit PFP-M pleated, manualoperated with handle
• The system frame is aluminium, 38x26mm, for guid-ing and securing fabric in the desired position during unrolling (opening of the system by the user).
• The frame is available in four colors: white, silver, brown and oak.
• The frame is held with special plastic corner joints (50x55mm), which are covered for reasons of uniformi-ty with plastic 43x43mm caps. The corners and caps are available in the same colors as the aluminium parts.
• The frame system is installed at the window with the assistance of special fixing corners strips only, avail-able in three sizes, depending on the depth of the glaz-ing recess. The dimensions of the fixing corners are: 30x26, 30x29 and 30x32 mm for glazing recesses 18, 20 and 22 mm respectively.
• Pleated blind 25mm, with handle operation, and cable - guides.
Technical Description
Description of parts
1. FrameAluminium (38x26mm) available in four colors.White, silver, brown and oak.
3. Plastic corner joints Plastic corner joints for mounting frame and mechanism.
3. System operation 25mm pleated system operating with plastic handle.
4. System guideCables and plastic tension jacks, used as a guide system, allowing movement in inclinated position.
PFP-M System Dimensions
Manufacturable Dimensions
Maximum width Maximum height Maximum surface area Comments
1,4 2,0 2.8 m2
the maximum and minimum dimensions which can be manufactured depend on the thickness of the fabric.
Interior shading
Perfect Fit blind systems
Perfect Fit PFV-M alouminiumand wood venetian blind 25mmoperating with a cord and rod
Perfect Fit® is an ideal option for UPVC windows and doors.
This system allows perfect installation for most double glazed windows and doors, with no need to drill holes in the frame!Tilt and turn windows or doors present no problem either, since the system moves together with the window or door.
• The system frame is aluminium, 38x26mm, for guiding and securing fabric in the desired position during unroll-ing (opening of the system by the user).
• The frame is available in four colors: white, silver, brown and oak.
• The frame is held with special plastic corner joints (50x55mm), which are covered for reasons of uniformi-ty with plastic 43x43mm caps. The corners and caps are available in the same colors as the aluminium parts.
• The frame system is installed at the window with the help of special fixing corners, available in three sizes, de-pending on the depth of the glazing recess. The dimen-sions of the strips are:30x26, 30x29 and 30x32 mm for glazing recesses 18, 20 and 22 mm respectively.
• 25mm aluminium-wooden venetian blinds, operated with rod cord and cables - guides.
Description of parts
1. FrameAluminium (38x26mm) available in four colors.White, silver, brown and oak.
2. Plastic corner joints Plastic corner joints for mounting frame and mechanism.
3.Headrail Metal 25x24mm headrail for 16, 25mm venetian blinds
2. Head/bottom rail Endcups
Semi-translucent plastic end cups.
PFV-M System DimensionsTechnical Description
Perfect Fit blind systems
Perfect Fit PFV-M with cord and rod aluminiumand wood venetian blind 25mm operating
Διαστάσεις Κατασκευάσιμες
Τype Maximum widthMaximum
surface areaMaximum
surface areaComments
Aluminium 1,4 2,0 2,8 m2the maximum and minimum dimensions which can be manufactured depend on the thickness of blinds.Wood 1,4 1,0 1,4 m2
Interior shading
Panel blind systems with side chain mechanism
The Optima P-ABS panel system is elegant and contempo-rary. Modern design, simple lines, ideal visibility and excel-lent protection from the sun.A decorative solution for all types of space, with a large vari-ety of patterns, colors and materials.Available in three types: rod, cord and electrically operated.
Panel blind systems
Model P-ABS-CPanel manual operated with endless cord
Panel blind systems
Model P-ABS-CManual panel operated with continuous loop cord
Description of parts
1. Panel track White or anodized panel tracks 2,3,4,5 ways.
2. Headrail Headrail with velcro, headrail with aluminum profile.
3. Bottom rail Plastic
4. Cord operation Cord runner and clip
5. Brackets Medium, small bracket
Technical Description Model P-ABS-C Dimensions
• The P-ABS-C panel track is available with 2, 3, 4, 5 ways tracks guide in anodized or white color.
• The panel tracks are white or anodized and their dimen-sions vary depending on the ways. The PVC headrails are attached to the tracks, in which the panels are then in-serted.
• PVC gliding profil ensure silent and smooth operation.
• The panels are attached in two ways: with velcro which is sewn on the fabric or with aluminum profil on which the fabric is attached.
• Panels are moved using a continuous loop cord.
• The bottom rail of the panels is aluminum.
• The fabrics fitted to the panels come in a large variety of qualities and colors.
• Brackets can be mounted either on the wall or ceiling, as required.
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
Guide rail 5.8 m - -
Sheet 1,3 m 3 m 3,9 m2
Panel blind systems with side chain mechanism
The Optima P-ABS panel system is elegant and contempo-rary. Modern design, simple lines, ideal visibility and excel-lent protection from the sun.A decorative solution for all types of space, with a large vari-ety of patterns, colors and materials.Available in three types: rod, cord and electrically operated.
Interior shading
Panel blind systems
Model P-ABS-WPanel manual operated by cord
Panel blind systems
Model P-ABS-WPanel manual operated by rod.
Description of parts
1. Panel track White or anodized guide panel tracks 2,3,4,5 ways.
2. Headrail Headrail with velcro, headrail with aluminum profile.
3. Bottom rail Plastic
4. Rod Operation Rod
5. Brackets Medium, small bracket
• The P-ABS-W panel track is available with 2, 3, 4, 5 ways in anodized or white colors.
• The panel tracks are white or anodized and their dimen-sions vary depending on the ways. The PVC headrails are attached to the guide tracks, in which the panels are in-serted.
• PVC gliding profile ensure silent and smooth operation.
• The panels are attached in two ways: with velcro which is sewn on the fabric or with aluminum profil on which the fabric is attached.
• The panels are operated using a rod.
• The bottom rail of the panels is aluminum.
• The fabrics fitted to the panels come in a large variety of qualities and colors.
• Brackets can be mounted either on the wall or ceiling, as required.
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
Guide rail 5.8 m - -
Sheet 1.3 m 3 m 3,9 m2
Technical Description Model P-ABS-W Dimensions
Interior shading
Panel blind systems with side chain mechanism
The Optima P-ABS panel system is elegant and contempo-rary. Modern design, simple lines, ideal visibility and excel-lent protection from the sun.A decorative solution for all types of space, with a large vari-ety of patterns, colors and materials.Available in three types: rod, cord and electrically operated.
Panel blind systems
Model P-ABS-EElectrically operated panel
Panel blind systems
Model P-ABS-EElectrically operated panels
Description of parts
1. Panel track White or anodized panel tracks 2,3,4,5 ways.
2. Headrail Headrail with velcro, headrail with aluminum profile.
3. Bottom rail Plastic
4. MotorMotor 88x66x234 mm., 12V DC-0.6A.(available in white color only).
5. Brackets Medium, small bracket
6. Control Wireless battery remote control
• The P-ABS-E panel track is available with 2, 3, 4, 5 ways in anodized or white color.
• The panel tracks are white or anodized and their dimen-sions vary depending on the ways. The PVC headrails are attached to the tracks, in which the panels are inserted.PVC gliding profil ensures silent and smooth operation.
• The panels are attached in two ways: with velcro which is sewn on the fabric or with adhesive tape to which the fabric is attached.
• The panels are moved by a motor with dimensions 88χ66χ234 mm 12V DC-0.6A. It is supplied with power ei-ther with cable or with batteries with the use of a battery case, and it is remotely operated.
• Coordination of the system and determination of limits is automatic at startup.
• The bottom rail of the panels is aluminum.
• The fabrics fitted to the panels come in a large variety of qualities and colors.
• The brackets can be mounted on the wall or the ceiling, depending on the need.
• The panels are attached in two ways: with velcro which is sewn on the fabric or with aluminum profil on which the fabric is attached.
Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
Guide rail 5.8 m - -
Panel 1.3 m 3 m 3,9 m2
Technical Description Model P-ABS-E Dimensions
Interior shading
Pleated blind systems 25 mm
Single systems
25mm pleated shading systems
with cord, handle or power operated mechanisms
25mm pleated shading systems
Optima pleated systems with 25mm pleats add a special touch to your decorative style. Also, thanks to the use of Verosol fabrics with a metal layer on their outer surface, they contribute significantly to energy saving by reflecting solar light. Fabrics are available in a large range of colors and designs.
25mm pleated blind shading systemsSingle systems
Installation Dimensions Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
P010.0 System 3,4 m 3,5 m 10 m2
P010.1 System 1,5 m 3,5 m 5,3 m2
P010.2 System 1,5 m 3,5 m 5,3 m2
P110.1 System 1,5 m 4,0 m 6 m2
P010.3 System 1,5 m 2,0 m 3 m2
P010.4 System 1,5 m 2,0 m 3 m2
Technical Description - Description of parts
Pleated, 25mm, with cord mechanism, free hanging, or hanging from cable or alumini-um profile track.
Model P010.0Simple pleated system, free hanging The system is raised using a
cord catch and release ratchet or special plastic handle.The extruded metal profile headrail has a 36x22mm cross section, and the bottom rail is of the same profile material and is U shaped, 12x29mm.The system is mounted with two types of metal brackets with plastic clasp on the ceiling and wall. There is an option to select steel cable side guides, covered in transparent PVC, or aluminium profile guide rails with special 37x15mm cross-section for in-stallation of the pleated systems on a inclination window.
Model P010.1Pleated systemwith cable guide rail
Model P010.2Pleated system with aluminium profile rail guides
25mm pleated system with handle operation, free suspension or suspended from cable or aluminium profile.
Model P110.1Pleated atrium systemwith tension profile
The system opens with a handle.The headrail is extruded metal profile, 35x19mm.The metal middle and bottom guide rails, which connect to the fabric, have square 35x19mm cross-sections.The system is mounted with two types of metal brackets with a plastic clasp, on the ceiling and on the wall, which must be used both for the headrail and bottom rail.This support keeps the system under tension and the fabric properly stretched at all times.
Model P010.3Pleated system with cable guide rails and handle opera-tion
Model P010.4Pleated system with alu-minium profile guide rails and handle operation
Interior shading
Pleated blind systems 25 mm
Double systems
Pleated blind systems 25 mmwith cord, handle or power operated mechanisms
25mm pleated shading systems
Optima pleated systems with 25mm pleats add a special touch to your decorative style. Also, thanks to the use of Verosol fabrics with a metal layer on their outer surface, they contribute significantly to energy saving by reflecting solar light. Fabrics are available in a large range of colors and designs.
25mm pleated blind shading systemsDouble systems
nstallation Dimensions Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
P030.0 System 2,9 m 3,0 m 7 m2
P030.1 System 1,5 m 3,0 m 4,5 m2
P030.2 System 1,5 m 3,0 m 4,5 m2
P020.0 System 3,45 m 3,6 m 10 m2
P020.1 System 1,5 m 3,0 m 4,5 m2
P020.2 System 1,5 m 3,0 m 4,5 m2
Technical Description - Description of parts
Double system with 25mm pleats, using two fabrics (day/night) with cord operation, free hanging or hanging from cable - aluminium profile rail.
Model P030.0 (Double pleated system, day/night, free hang-ing)
The double pleated system (day/night) incorporates two types of fab-rics, one complete black-out and one see-through for shading purposes. (Day & Night)The system is raised using a cord and two catch and release ratchets.The metal profile headrail has a cross section of 36x22mm, the metal middle guide rail connecting the two fabrics has a square cross-section of 19x29mm, and the bottom rail is of similar U shaped material, 12x29mm.The system is mounted using two types of metal brackets with plastic clasp on the ceiling and wall.There is an option to select steel cable side guides, covered in trans-parent PVC, or aluminium profile guide rails with 37x15mm cross-section for installation of the pleated systems on nclination window.
The double pleated system (duo) has one fabric and two headrails (upper and middle), and thanks to these the system ‘opens’ from bottom to top and vice-versa. By moving the middle headrail to the top or to the bottom, we can achieve the desired shading at the specific part of the opening. The system is raised with the use of a cord and catch and release ratchets.The headrail and the middle guide rail connected to the fabric are metal, with a 36x22mm extruded profile, while the bottom rail is of the same material and U shaped, 12x29mm. The system is mounted with two types of metal brackets with a plastic clasp, on the ceiling and on the wall. There is an option to select steel cable side guides, covered in transparent PVC, or aluminium profile guide rails with special 37x15mm cross-section for installation of the pleated systems on a inclination window.
Model P030.1 (Double pleated system, day/night, free hang-ing)
Model P030.2 (Double pleated system, day/night, aluminium profile guide rails)
Double system with 25mm pleats, using a single fabric (duo) with cord operation, free hanging or hanging from cable - aluminium profile rail.
Model P020.0 (Double pleated system with one fabric, duo, free hanging)
Model P020.1(Double pleated system with one fabric, duo, cable guide rails)
Model P020.2 (Double pleated system with one fabric, duo, with aluminium profile guide rails)
Interior shading
Pleated blind systems 25 mm
Triangular, arched andtrapezoid systems25mm pleated shading systems with cord,handle or power operated mechanisms
Pleated blind systems 25 mm
Optima pleated systems with 25mm pleats add a special touch to your decorative style. Also, thanks to the use of Verosol fabrics with a metal layer on their outer surface, they contribute significantly to energy saving by reflecting solar light. Fabrics are available in a large range of colors and designs.
Pleated blind systemsTriangular, arched and trapezoid systems
Installation Dimensions Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
Model P050.0, P050.1, P050.3 2,9 m
(large base)3,5 m 7,5 m2
Model P060.0, P060.1, P060.3 2,9 m
(large base)3,5 m 7,5 m2
Model P070.0, P140.3, P130.3
P070.0
3,5 m(large base)
1,6 m 2,8 m2
P140.3
2,0 m(large base)
0,82 m 0,8 m2
P130.3
1,5 m(triangular base)
2,0 m 1,5 m2
Model P080.0 2,0 m(large base)
3,0 m(large base)
6 m2
Model P090.0 2,0 m(base)
1,0 m 1,57 m2
Technical Description - Description of parts
Special shaped pleated 25mm, with cord or handle mechanism, free hanging or hanging from cable - aluminium profile.
Model P050.0, P050.1, P050.3 A-shaped trapezoid pleated system, with handle, free hanging or hanging from cables or aluminium profile hanging guide rails
The A-shape trapezoid pleated system has its larger base at the bot-tom, which can be raised, while the pleated V trapezoid has the smaller base point at the bottom, which can be raised up.The system is raised using a cord and a catch and release ratchet.The extruded metal profile headrail has a cross section of 36x22mm, and the bottom rail is of the same profile material and is U shaped, 12x29mm.The system is mounted using two types of metal brackets with plastic clasp on the ceiling and wall.There is an option to select steel cable side guides, covered in transparent PVC, or aluminium profile guide rails with special 37x15mm cross-section for installation of the pleated systems on a sloping window.
Model P060.0, P060.1, P060.3V shaped trapezoid pleated system, with handle operation, free hanging or hanging from cables or aluminium profile hanging guide rails
Model P070.0, P140.3, P130.3Triangular system, with an equilateral or right angle shape, operated by cord or handle
Triangular system, with an equilat-eral or right angle shape, operated by cord or handle. Due to the special shape there are limitations to the maximum manifactorable dimen-sions. The extruded metal profile upper and lower guide rails have a 36x22mm cross section.
Model P080.0Triangular plus system with double cord operation, free hanging
The “Triangular plus” pleated system has systems of two shapes, with an option to use fabrics of varying transparency, connected to a com-mon middle guide rail. The system is raised using a cord and two catch and release ratchets. The metal profile headrail has a cross section of 36x22mm, the metal middle guide rail connecting the two fabrics has a square cross-section of 19x29mm, and the bottom rail is of similar U shaped material, 12x29mm. The system is mounted using two types of metal brackets with plastic clasp on the ceiling and wall.
Model P090.0Fixed arch system, without mechanism
Special shape pleated system, “arch” type, without mechanism. Uses a single extruded metal profile bottom guide rail, with a 36x22mm cross section.
Interior shading
Pleated blind systems 25 mm
Power operated systems25mm pleated shading systems with cord,handle or power operated mechanisms
25mm pleated blind shading systems
Optima pleated systems with 25mm pleats add a special touch to your decorative style Also, thanks to the use of Verosol fabrics with a metal layer on their outer surface, they contribute significantly to energy saving by reflecting solar light. Fabrics are available in a large range of colors and designs.
25mm pleated blind shading systems Power operated systems
Technical Description - Description of parts
25mm pleated system with motorized op-eration, free hanging or hanging from cable or aluminium profile guide rail.
Model P170.0Motorized pleated system, free hanging
The system is raised with the use of an electric 24V motor and voltage transformer.The extruded metal profile headrail has a 36x22mm cross section, and the bottom rail is of the same profile material and is U shaped, 12x29mm.he system is mounted using two types of metal brackets with plastic clasp on the ceiling and wall. There is an option to select steel cable side guides, covered in trans-parent PVC, or aluminium profile guide rails with special 37x15mm cross-section for installation of the pleated systems on a inclination window.
Model P170.1Motorized pleated system with cable guide rails.
Model P170.2Motorized pleated system with extruded aluminium profile guide rails.
Model P180.1Tentioned motorized pleated system, for atriums,
The metal profile headrail has a cross section of 36x40mm, the metal middle guide rail connecting to the fabric and the bottom rail have a square cross-section of 33x19mm. The system is mounted on two types of metal brackets with plastic clasp for attachment to the ceiling and the wall, which must be used both for the headrail and bottom rail. This mount-ing keeps the system under tension and the fabric stretched at all times.
Installation Dimensions Manufacturable Dimensions
Features Maximum width Maximum height Maximum surface area
Model P170.0 3,9 m 3,6 m 10 m2
Model P170.1 1,5 m 3,6 m 5,3 m2
Model P170.2 1,5 m 3,6 m 5,3 m2
Model P180.1 3,0 m 3,6 m 8 m2
Interior shading
Shading systems50 mm pleated blind
PL50-MPleated blinds 50mm, with cord mechanism, free hanging
50 mm pleated shading systems
Pleated fabric blind system with 50mm pleats, available in various qualities and a large range of colors.The pleated structure of the fabric offers energy savings and protects from ultraviolet radiation. The light is diffused through the fabric creating a beautiful ambience.Pleated blinds are an ideal energy saving solution with a strong decorative appeal.
50 mm pleated shading systems
PL50-MPleated blind 50mm, with cord mechanism, free hanging
• System parts are available in anodized colors or white.The system is raised using a catch and release cord lock.
• The metal profile headrail is 70x32.5mm, and the bot-tom rail is 55x12mm of the same profile material and are U shaped.
• The system is mounted using two types of metal brack-ets with clips on the ceiling and wall.
• There is no option for side cable guides for installation of pleated systems on an inclinated window.
• The fabrics have 50mm pleats, and are available in a large variety of qualities and colors.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Maximum surface in m2 Comments
3.5 m 4 m 11.2 m2Maximum and minimum manu-facturable dimensions depend on the fabric
PL50-M System Dimensions
Description of parts
1. Headrail Headrail 70χ32.5 mm
2. Bottom rail Bottom rail 55x12mm
3. Operation Cord mechanism
4. Brackets Wall - ceiling
5. Fabric 50mm pleated
Interior shading
Shading systemsPleated 50 mm
PL50-M TD50 mm pleated shading systems with double cord mechanism
50 mm pleated shading systems
Pleated fabric blind system with 50mm pleats, available in various qualities and a large range of colors.The pleated structure of the fabric offers energy savings and protects from ultraviolet radiation. The light is diffused through the fabric creating a beautiful ambience.Pleated blinds are an ideal energy saving solution with a strong decorative appeal.
50 mm pleated shading systems
PL50-M TD50 mm pleated shading systems with double cord mechanism
• The double pleated PL50-M TD system has one fabric and two headrails (upper and middle), which allows the system to open from bottom to top and vice-versa.Moving the middle headrail towards the top or the bottom will create the desired shading over a specific part of the window space.
The system is raised using a catch and release cord lock.
The headrail and the middle guide rails connected to the fabric are metal, 70x32.5mm extruded aluminium pro-file, while the bottom rail is of the same material using a U shaped profile of 55x12mm.• The system is mounted using two types of metal brack-ets with clips on the ceiling and wall.
The system is raised using two catch and release cord locks.
• System parts are available in anodized colors or white.
• The fabrics have 50mm pleats, and are available in a large variety of qualities and colors.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Maximum surface area in m2 Comments
3.5 m 4 m 11.2 m2Maximum and minimum manu-facturable dimensions depend on the fabric
PL50-M TD System Dimensions
Description of parts
1. Headrail Headrail 70x32.5 mm
2. Bottom rail Bottom rail 55x12mm
3. Middle Headrail Bottom rail 55 x 16mm
4. Operation Cord mechanism
5. Brackets Wall - ceiling
6. Fabric Pleated 50mm
Interior shading
Shading systemsPleated 50 mm
PL50-E Motorized 50mm pleated blind systems
50 mm pleated shading systems
Pleated fabric blind system with 50mm pleats, available in various qualities and a large range of colors.The pleated structure of the fabric offers energy savings and protects from ultraviolet radiation. The light is diffused through the fabric creating a beautiful ambience in the space.Pleated blinds are an ideal energy saving solution with a strong decorative appeal.
50 mm pleated shading systems
PL50-E50 mm pleated shading systems with motorized operating mechanism
• System parts are available in anodized colors or white.
• The system is raised using an electric 230V AC 50Hz motor with remote control operation.
• The metal profile headrail is 70x32.5mm, and the bot-tom rail is of the same profile material and is U shaped, 55x12mm.
• The system is mounted using two types of metal brack-ets with clips on the ceiling and wall.
• There is no option for side steel cable guide rails for in-stallation of pleated systems on a tilted window.
• Fabrics have 50mm pleats, and are available in a large variety of qualities and colors.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Maximum surface area in m2 Comments
3.5 m 3.5 m 12.3 m2Maximum and minimum manu-facturable dimensions depend on the fabric
PL50-E System Dimensions
Description of parts
1. Headrail Headrail 74.5x78mm.
2. Bottom rail Bottom rail 55x12mm.
3. Motor - remote control 230V AC 50Hz motor and wireless battery remote control.
4. Brackets Wall - ceiling.
5. Fabric Pleated 50mm.
Interior shading
Roman blind systems
Fabric blind with chain mechanismRAS-M
Interior roman blind systems
The system is available with either manual and electrical op-eration, which can be automated.Roman blinds are available in any upholstery or curtain fabric suitable for shading, allowing for perfect integration within the surrounding space.The roman blind is an ideal decorative solution for window shading.
Roman blind systems
Fabric roman blind, with chain mechanism,free hanging Description of parts
Headrail Aluminium headrail, 37x34mm
Rotation (1:1) Rotation mechanism with plastic chain, with a 1:1 ratio
Rotation (1:2) Rotation mechanism with plastic chain, with a 1:2 ratio
Tape rolls Plastic rotating cord reeling barrel
Brackets Galvanized metal ceiling and wall brackets
Rotation axis Metal motion transmission axis, square 5x5mm cross-section
• The RAS-M roman blind mechanism consists of an alu-minium headrail with a 34x37mm and a chain which is used to raise and lower the fabric. The Roman blind mechanism is available in two chain/fabric rotation speeds. 1:1 for fabric weighing up to 3kg and 1:2 for fabric weighing up to 4.5kg.
• The fabric is raised using cords reeled around special plastic tape rolls located inside the headrail: motion being transmitted through the rotation axis.
• Special fiber glass rods are sewn inside the fabric, with a diameter of 5mm, which allows the fabric to fold into pleats as it is raised.
• The counter weight (bottom rail) is metal, flat, 30mm and 5mm thick, available in white, for insertion in the special pocket created in the bottom hem bar.
• The brackets are made of galvanized metal, 30x40mm, and can be used on walls or ceilings.
Technical Description RAS-M System Dimensions
Manufacturable Dimensions
Maximum width Maximum height Maximum surface area Comments
3,5 m 3,0 m 10,5 m2
the maximum and minimum dimensions which can be manufactured depend on the weight of the fabric.
Graphics 7
Interior shading
Roman blind systems
Fabric blind power operated mechanism RAS-B and RAS-E
Roman interior shading systemswith fabric
The system is available with either manual or electrical op-eration, which can be automated.The roman blind is available with any upholstery or curtain fabric suitable for shading, perfectly matching the surround-ing space. The roman blind is an ideal decorative solution for window shading.
Roman blind systems
Fabric roman blind, electrically operatedwith battery or 220V motor, free hanging
• The RAS-B roman blind mechanism consists of an alu-minium headrail 34x32mm, where the fabric is raised and lowered with the use of a battery motor. The mecha-nism consists of a latest technology 12V motor, wire or wireless motion control (RTS), also compatible with auto-mation systems. • The RAS-E roman mechanism consists of an aluminium headrail 51x58mm, where the fabric is moved with the use of a 220V motor. It is operated with a switch or a re-mote control. There is an option to remotely operate more systems (or a group) with one remote control. If an RTS motor is used, the minimum width that can be manufac-tured is 1m.
• The fabric is raised using cords reeled around the tape rolls (barrels) located inside the headrail: motion being
transmitted through the rotation axis.
• Special fiber glass rods are sewn inside the fabric, with a diameter of 5mm, which allows the fabric to fold into pleats as it is raised.
• The counterweight (bottom rail) is metal, flat, 30mm and 5mm thick, available in white, for insertion in the special pocket created in the bottom hem bar.
• Brackets are made of galvanized metal, and can be used on walls or ceilings.
Technical Description
Description of parts
Headrail for 12V battery motor
Special cross-section aluminium head rail, closed type, 34x32mm
Headrail for 220V motor Aluminium headrail, square 51x58mm cross-section
Rotation axis Metal motion transmission axis, square 6x6mm
Middle Headrail Plastic rotating tape roll (barrel)
Motor Battery and 220V-50Hz motor mechanism
Batteries Battery case with integrated lithium batteries
Brackets Galvanized metal ceiling and wall brackets
RAS-B and RAS-E Systems Dimensions
Manufacturable Dimensions
Model Maximum width Maximum height Maximum surface area Comments
RAS-E 3,5 5,0 17,5 m2
the maximum and minimum dimensions which can be manufactured depend on the weight of the fabric.
RAS-B 3 m 4 m 12 m2
the maximum and minimum dimensions that can be manufactured depend on the weight of the fabric.
Graphics 7
Interior shading
Interior Roman blind cassete system
The system is available with manual operation.An innovatory feature of the system is that roman blinds can be made in roller blind fabrics, allowing the introduction of different systems (roller and roman) in the same space using the same fabric, giving the surrounding area a per-fectly integrated appearance.
Roman blind systems
Fabric with chain mechanismRCAS-M
Roman blind systems
Model RCAS-MRoman blind, with Roller fabrics andchain mechanism, free hanging
• Roman blind system operated with a Roller chain mech-anism (5.0x6.5cm), with special slots for safe installa-tion on its brackets, made of white plastic, with integrated metal spring to hold the position and stop unwanted rota-tion of the roller without the use of the chain. The brack-ets are white metal, with the option to install on walls or ceilings.
• The mechanism is installed in an open cassete made of extruded aluminium profile, 6.0x4.0cm. The front fascia can be dressed with the blind system fabric and acts as a valance.
• The bottom rail, which is used as a counterweight to keep the fabric stretched, has a square cross-section made of anodized silver aluminium, with a special groove for insertion of the dowel rod.
• The bottom rail endcups are round, made of white or grey plastic, for decorative purposes.
• Plastic chain ball, or optionally metallic chain ball, main-ly for use in systems of large size (a height greater than 2 meters), as well as a choice between an endless chain with or a clip. If endless chain is chosen, there is the op-tion to use a chain counter weight.
• The fabric used is the same as for roller blinds.
Description of parts
Headrail Cassette Open roman cartridge, 6x4cm
Roman MechanismChain rotation mechanism, 5.0x6.5cm, with special slots for safe installation on its brackets.
Tube Aluminium tube, 32mm.
Bracket White metal brackets, with white plastic cap.
Middle railAluminium profile, with square 0.8x1.2cm cross-section, for insertion of dowel rods.
Bottom rail Square cross-section bottom rail, 1.2x3cm.
RCAS-M System DimensionsTechnical Description
Manufacturable Dimensions
Maximum width Maximum height Maximum surface area Comments
2 m 2.5 m 5 m2
the maximum and minimum dimensions which can be manufactured depend on the weight of the fabric.
Interior shading
Shading systemsNature Concept
RNC-M roman blind systemswith natural texture fabricand cord mechanism
Roman blind systems with natural texture fabric and cord mechanism.
Optima RNC-M systems are roman blinds shading systemsmade of materials that both look and feel natural.Whatever style of interior decoration you choose. The vari-ous woods are woven in a way which lets in filtered light.They create an oriental feel, adding a touch of the tropics to your space, while at the same time protecting you from the sun and curious eyes.
Nature Concept blind systems
Manually operated roman blindwith cord mechanism Description of parts
1. Headrail Wood headrail 30x30mm.
2.Bottom rail Wood bottom rail 15x35mm.
3. Cord operationMechanism consisting of plastic pulleys, cord and metal hooksattached to the woven wood, which is raised in pleats from bottomto top.
4.Brackets Wall or ceiling brackets
5. Mesh Woven wood, bamboo and natural fibre woven fabric
• The RNC-M roman blind system with woven wood and natural texture fibre materials.
• The RNC-M roman mechanism consists of a wooden headrail 33x35mm, two plastic pulleys, 1.6-2mm cord and metal hooks which make the weave fold from bottom to top to form pleats. Wooden bottom rail 22x12mm to cross section.
• Wall or ceiling galvanized matal brackets 30x40mm.
• System width.The maximum width of the RNC-M systems is equivalent to the width of the woven roll fabric. Due to the natural texture fabric sews are not possible.
• Height of systems: up to 2.5m, depending on woven wood.
• Due to the physical properties of the natural fibres, the lattice woven strip woods may have uneven gaps between them, or from cord to cord, and they may have cut or frayed edges. They may also have color variations compared to the sample color selector.
Technical Description
Manufacturable Dimensions
Maximum width Maximum height Maximum surface area in m2 Comments
2.4m 3m 7.2 m2The maximum width and height of the system depends on the woven roll fabric.
RNC-M Roman System Dimensions
Interior shading
Shading systemsNature Concept
ROLL-UP roller blind systemswith natural texture fabric and cord mechanism
Roller blind systems with natural texture fabric and cord mechanism.
Optima ROLL-UP systems are Roller blinds shading systems made of materials that that both look and feel natural. What-ever style of interior decoration you choose.The various woods are woven in a way which lets in filtered light. They create an oriental feel, adding a touch of the trop-ics to your space, while at the same time protecting you from the sun and curious eyes.
• The ROLL-UP system consists of a mechanism using pulleys and cord, with woven wood fabric, natural texture fibres and bamboo.
• The ROLL-UP rollers mechanism consists of a wooden headrail 33x35mm plastic pulleys and a 1.6-2mm nylon cord.
• The cord passes over the outer surface, and makes the fabric roll up from bottom to top. Wood bottom rail 15x35mm.
• Wall or ceiling galvanized metal brackets 30x40mm.
• System width.The maximum width of the ROLL-UP systems is equiva-lent to the width of the woven roll fabric. Due to the natu-ral texture fabric sews are not possible .
• Height of systems 2.5m, except from certain woven fab-rics whose physical properties do not permit heights of greater than 1.5m.
• Due to the physical properties of the bamboo and other fibres, the lattice woven strips may have uneven gaps be-tween them, or from cord to cord, and they may have cut or frayed edges. They may also have variations compared to the color sample color selector.
Technical Description ROLL-UP System Dimensions
Nature Concept blind systems
Manual Roller operated with ROLL-UP cordDescription of parts
1. Headrail Wood headrail 20x30mm.
2.Bottom rail Wood bottom rail 15x35mm.
3. Cord operationMechanism with pullers and cord on the exterior of the fabric roll, which rolls up from bottom to top.
4.Brackets Wall or ceiling brackets.
5. Mesh Woven wood, bamboo and natural woven fabrics.
Manufacturable Dimensions
Maximum width Maximum height Maximum surface area in m2 Comments
2.4 m 3 m 7.2 m2The maximum width and height of the system depends on the woven roll fabric.
4
5
2
3
1
Interior shading
Optima Shutters
Shading systems
Optima Shutters Shading Systems
Optima Shutters dress windows in wood, offering a unique solution for light control and exterior views. They can be used to cover any window shape.They are available in two basic qualities of wood and many colors. They have 4 types of frames and 3 different modes of operation.
Optima Shutters Shading Systems
• Optima Shutters offer unique solutions to light control and the interior appearance of windows wood finishes they add to your décoration.
• Available in 54 colors, 4 types of frames and 3 modes of operation (opening, folding, tracks movement).The width of the blinds varies between 47, 63, 89 and 114mm.
Opening Folding
Motion by tracks
Interior shading
Somfy Motors& Automated Systems
All remote controls and automations can be combined with wireless Somfy motors.
You can control all interior shading installations with motors which operate noiselessly, or with battery-operated motors.
Roller shutters
Home Motion by Somfy: Automatic motion in the home! Remote controls & Automations
The wireless technology developed by Somfy is considered to be a worldwide benchmark in electrically operated applications, providing innovative solutions in automated motion in homes and other buildings.
Easy installation: Installation by professionals familiar with Somfy products is easy and fast.
Ease of use: With the touch of a button on the remote control you can operate your home window shades from a distance of up to 200 meters. Wireless remote controls have a transmission range of 20 meters through two concrete walls and up to 200 meters in free space.
Economy: Somfy automated systems contribute to better solar energy management and the maintenance of constant temperature in interior spaces.
Upgrade: Thanks to the wireless technology, switches and remote controls are inter-changeable; their operation can be grouped and further wireless automation can be added without installation of extra cabling.
Blinds, rollers, curtains
Exterior Venetian blinds
Main gates
Exterior vertical louvres
SkylightsInterior Venetian blinds
Garage doors
Awnings
Wireless Remote Controls
New Generation Remote Controls & Sensors
Wireless Wall Mounted New Generation Switches
The 4 channel remote control is especially designed for Venetian blinds, with a rotating dial for pre-cise adjustment of the louvre tilt.
The new Telis 16 RTS is a radio remote control with 16 channels, which can manage all your installations, including roller blinds, louvres, roman blinds and projector screens, in com-bination with your awnings, exterior roller shutters and garage doors.
Control of multiple productsWireless control for 4 dif-ferent products or groups, individually or grouped.
Wireless interior light sensorIt detects the level of sun-light and the installations are programmed to respond to the ambient brightness of the room.
Smoove RTS seriesComfort is now in your hands!
The new series of wireless wall mounted switches combine ease of use with style. Forget unnecessary wiring, choose the design which meets your needs and operate your prod-ucts in style.
Central control
All remote controls and wireless Somfy switches can give central commands
to all electrically operated installations in the home, permitting simultaneous
opening and closing.
Operation
The remote control can be used to save the ideal position you require in the mechanism memory. For example, louvres can be automatically set to your ‘favorite’ position, providing shade in interior
spaces whilst simultaneously permitting diffusion of the desired level of natural light
within the room.