OPTICAL INSTRUMENTS - pdfs.findtheneedle.co.ukpdfs.findtheneedle.co.uk/16707..pdf · OPTICAL...

191

OPTICAL INSTRUMENTS

Tel: 08708 50 90 50 Fax: 08708 50 90 60 Partners in Precision

Metallurgical MicroscopeInverted and compound metallurgical microscope suitable for observing the microstructure of non-transparent objects. Clear, crisp and high-contrast image with or without colour filters. Professional instrument for research work in metallographic environments or laboratories, mineralogy, precision engineering, electronics, etc.

Features• Plan achromatic objectives with long working distance

(no cover glass) and wide-field eyepieces• Clear and crisp images from the eyepiece or from the

video channel• Video channel connector (CCD adaptor) optional• Works with normal cameras or video systems• Large displacements of the mechanical stage, quick or

slow movement• Coaxial coarse/fine focus system, tension adjustable, upper

limit stop, minimum division of fine focusing: 0.7µm• 6V 20W halogen lamp, adjustable brightness• Trinocular system, can easily be switched from manual

observation to video channel

TECHNICAL SPECIFICATION

W-MM600 W-MM650Eyepiece Wide fi eld WF10X 18mm and Wide fi eld WF12,5X 14mm Wide fi eld WF10X (18mm)

Objectives

Plan achromatic objectives with long working distance (no cover glass)PL 10X/0.25PL 20X/0.40PL 40X/0.60 PL 100X/1.25 (oil)

Plan achromatic objectives with long working distance (no cover glass) PL 5X/0.12PL 10X/0.25PL 20X/0.40 PL 40X/0.60PL 80X/0.80

Eyepieces tube Trinocular, Inclination of 450, (Analyzer, switchable fi eld diaphragm) Trinocular, Inclination of 30º, (Analyzer, switchable fi eld diaphragm)Vertical illumination unit 6V 30w, halogen lamp, with brightness control 6V 20w, halogen lamp, with brightness controlVertical illumination Field diaphragm, aperture diaphragm and polarizer, (Y,B,G) fi lter and Field diaphragm, aperture diaphragm and polarizer, (Y,B,G) fi lter and

frosted fi lter, Filters Blue, Green, Grey, White frosted fi lter

Focus system Focus system, with tensional adjustable, up limit stop, minimum division of fi ne focusing: 0.7µm

Stage adjustable, Coaxial coarse/fi ne focus system, with tensional adjustable, up limit stop, minimum division of fi ne focusing: 0.7µm

Nosepiece Quintuple (Frontward ball bearing innerlocating) Quintuple (Frontward ball bearing innerlocating)

Stage

Three layer mechanicalSize:180mm x 165mmPlates 10 and 20 includedTraverse 50x40mm

Three layer mechanicalSize:250mm x 230mm, (Standard)Traverse range:154mm x 154mmSize:280mm x 270mm, (Optional)Traverse range: 204mm x 204mm

METALLURGICAL MICROSCOPE

Code No DescriptionW-MM600 Inverted Metallurgical Microscope W-MM650 Metallurgical Microscope

W-MM600 W-MM650

OPTIONAL ACCESSORIES

Code No W-MM600 W-MM650

Eyepiece Wide field WF10X 20mmWide field WF16X 13mmHuygenian ocular 5X 20mm

Wide field WF16X(11mm) Dividing10X(|µ18mm) 0.1mm/Div

Objectives

Plan achromatic objectives with long working distance (no cover glass)PL 50X 0.70PL 60X 0.75PL 100X 0.85 (Spring)PL 100X 1.25 (Spring, oil)

Filters As Standard Green & Yellow filterStage plate 40mmCCD adapter As Standard 0.4X ; 0.5X ; 1X ; 0.5X with dividing 0.1mm/Div

Camera system Windows PC based software for image analysing DV-1 (With USB & video output)DV-2 (With USB output)DV-3 (With video output)

Photographic unit10X Viewing eyepiece2.5X/4X Change over photograph attachment4X Focusing photograph attachment

10X Viewing eyepiece2.5X/4X Change over photograph attachment4X Focusing photograph attachment

Digital camera adapter 1X C-mount adapter, 0.6X C-mount adapter CANON (A610, A620, A630, A640)

BUK2012_P190-191.indd 191 27/01/2012 14:23

192

OPTICAL INSTRUMENTS

For more information visit www.bowers.co.uk

CV Stereo Zoom MicroscopeStereo microscope with incident and transmitted illumination.

Features• High quality stereo zoom microscope

• Stereo zoom microscope with extra optical tube

for cameras (CV-MZ630T)

• Delivers sharp high contrast images

• Excellent zoom ratio of 1:6.5

• Wide zoom magnification range 7x - 45x

standard, 2.1x - 225x

• Working distance range of 40mm - 314mm

simplifies observation deep into the specimen

• Perfect for industrial inspection and for

assembly purposes

TECHNICAL SPECIFICATION

Code No W-CV-MZ630B W-CV-MZ630T

Microscope type Binocular microscope Trinocular microscope

Magnifi cation type Zoom Zoom

Total magnifi cation 7x - 45x (with standard oculars) 7x - 45x (with standard oculars)

Zoom ratio 1:6.5 (0.7 - 4.5x) 1:6.5 (0.7 - 4.5x)

Oculars WF10x wide focus (standard) WF10x wide focus (standard)

Field of view 33mm - 5.1mm diameter 33mm - 5.1mm diameter

Working distance 108mm (standard) 108mm (standard)

Binocular tubes Inclined 45° Inclined 45°

Interpupillary distance Adjustable 55mm - 75mm Adjustable 55mm - 75mm

Diopter adjustment ±5 Diopter (two eyepieces adjustable) ±5 Diopter (two eyepieces adjustable)

Eyepiece tube Rotatable 360° Rotatable 360°

Camera system NONE Tube for camera attachment

Light system Incident and transmitted halogen illuminator 6V, 15W Incident and transmitted halogen illuminator 6V, 15W

Power 220V/50Hz or 110V/60Hz 220V/50Hz or 110V/60Hz

OPTIONAL ACCESSORIES

Code No W-CV-MZ630B W-CV-MZ630T

Eyepiece Oculars WF15x, 20x, 25x Oculars WF15x, 20x, 25x

Objectives Auxiliary objectives 0.3x, 0.5x, 0.75x, 1.5x, 2x Auxiliary objectives 0.3x, 0.5x, 0.75x, 1.5x, 2x

Filters As standard Green & Yellow fi lter

Stage plate 40mm -

CCD adapter - 0.4X ; 0.5X ; 1X ; 0.5X with dividing 0.1mm/Div

Pillar extension Pillar extensions for large specimen Pillar extensions for large specimen

Bulbs Spare Bulbs Spare Bulbs

Camera adapter NONE C-mount adapter for CCD - camera

W-CV-MZ630B W-CV-MZ630T

CV STEREO ZOOM MICROSCOPE

Code No Description

W-CV-MZ630B Binocular stereo microscope

W-CV-MZ630T Trinocular stereo microscope

BUK2012_P192-193.indd 192 23/01/2012 12:16

193

OPTICAL INSTRUMENTS


Baty R14 - Profile ProjectorThe instantly recognisable R14 design dates back decades! With thousands of units sold the world over, the R14 has become the

industry standard by which others are measured.

Features• 0.5 micron X, Y measuring resolution

• 340mm (14") screen with 90 degree crosslines and chart clips

• Profile illumination with halogen lamp and green filter

• Lens magnification choice: x10, x20, x25, x50, x100

• Surface illumination (fibre optic)

• Helix adjustment ±7° of light source for accurate thread form projection

• Cast iron workstage with machined slot for holding accessories

• Workstage measuring range of 175mm (7") x 100mm (4")

• Digital angle measurement to 1 minute of arc

• Digital clock function

• All steel body

• Includes 10x lens

Available Options• Internally fitted automatic edge sensor (shown)

• Swing-over lamphouse to allow clear access to the workstage

• Cabinet stand ensures a solid base and provides storage

• Other options include foot switch control and printer

• Full work holding accessories

• Extended lamphouse for larger components

Large screen floor standing models also available

Fusion AB2

LENS SYSTEMS

Code No Description

122-600 Lens system - magnification 10x





BATY R14

Code No Description Lens Includes

R14-XLS Horizontal projector with QC100 two axis digital readout 10x lens Surface illumination

R14-GXL Horizontal projector with QC220 geometric readout 10x lens Surface illumination

R14-GXL-E Horizontal projector with QC220 geometric readout & optical edge detection 10x lens Surface illumination

R14-AB2 Horizontal projector with Fusion 2D software including PC 10x lens Surface illumination

R14-AB2-E Horizontal projector with Fusion 2D software including PC & optical edge detection 10x lens Surface illumination

Projector Type R14

Magnification 10x 20x 25x 50x 100xField of view 35 18 14 7 4Working Distance 82 38 24 15 31Maximum half field 103 103 80 45 96Working Diameter full field 120 109 56 31 77

BUK2012_P192-193.indd 193 23/01/2012 12:16

R400

Magnification 10x 20x 25x 50x 100xField of view 40 20 16 8 4Working Distance 80 82 70 53 43Maximum 184 185 185 185 143Working Diameter 179 176 181 147 122all dimensions in mm

194

OPTICAL INSTRUMENTS


Baty R400Baty has been a leader and innovator in high-accuracy measurement products for over seventy five years. The new horizontal 16" / 400mm

screen profile projectors offer a large workstage area combined with a multitude of features included as standard.

Features• 0.5 micron X, Y measuring resolution

• Fully usable 16" / 400mm screen

• Digital Screen Protractor

• Built-in helix adjustment

• Quick change single lens mount

• Sturdy all-steel design

• Cross roller bearings

• Quick release 'X' travel

• Erect image

• Easy-view vertical screen

• Large stage travel 6" (150mm) x 12" (300mm)

• Rotating chart clips

• Fibre optic illumination for surface measurement

• Green filter


Available Options• Automated measurement system

with joystick control

• Automatic edge sensing

• Motorised focus axis

• Swing-over lamphouse for large parts

• Heavy duty cabinet stand

LENS SYSTEMS

Code No Description

RH400-087 Lens system - magnification 10x





BATY R400


R400-XLS Horizontal projector with QC100 two axis digital readout 10x lens Surface illumination

R400-GXL Horizontal projector QC200 geometric readout 10x lens Surface illumination

R400-GXL-E Horizontal projector QC200 geometric readout with optical edge detection 10x lens Surface illumination

R400-AB2 Horizontal projector Fusion 2D software including PC 10x lens Surface illumination

R400-AB2-E Horizontal projector Fusion 2D software & optical edge detection including PC 10x lens Surface illumination

BUK2012_P194-195.indd 194 23/01/2012 15:24

195

OPTICAL INSTRUMENTS


Baty SM350 - Profile ProjectorWith virtually all components designed in-house by Baty, this completely new design offers a flexible solution to most measurement

problems. This vertical 14" / 350mm screen projector offers a 3-position lens turret for instantaneous lens change without recalibration.

Features• Fully usable 340mm screen

• Digital Screen Protractor

• Built in helix adjustment

• 3-Position turret

• Sturdy all-steel design

• Cross roller bearings

• Quick release "X" and "Y" travel

• Erect image

• Easy-view vertical screen

• Large stage travel 10" (250mm) x 5" (125mm)

• Rotating chart clips

• Fibre optic illumination for surface measurement


Available Options• Automated measurement system

with joystick control

• Automatic edge sensing

• Motorised focus axis

• Heavy duty cabinet

• Touch trigger probe for fast Z axis measurement

LENS SYSTEMS

Code No Description






BATY SM350


SM350-XLS Horizontal projector with QC100 two axis digital readout 10x lens Surface illumination

SM350-GXL Vertical projector QC220 Geometric Readout 10x lens Surface illumination

SM350-GXL-E Vertical projector QC220E Readout with optical edge detection 10x lens Surface illumination

SM350-AB2 Vertical projector Fusion 2D software including PC 10x lens Surface illumination

SM350-AB2-E Vertical projector Fusion 2D software & optical edge detection including PC 10x lens Surface illumination

Fusion AB2

SM350

Magnification 10x 20x 25x 50x 100xField of view 35 17 14 7 3Working Distance 84 37 29 17 41Maximum half field 220 162 52 51 140Working Diameter full field 171 130 75 37 97Maximum Height Object 114 113 106 111 103all dimensions in mm

BUK2012_P194-195.indd 195 23/01/2012 15:24

196

OPTICAL INSTRUMENTS


Fusion SoftwareAB2 / AB2-E

PC based measuring system with full geometric functionality.

Graphical view of measured part can be printed as fully

dimensioned drawing with geometric tolerances. Other graphics

include form error and SPC charts. Full reporting capability

includes tabulated details with pass / fail analysis, auto-link to

Excel™ and auto sequence programming feature. Can be supplied

as software only for self- installation or as a complete system.

• Dimensioned drawing of the measured part

• Geometric functions for curve, line, arc, align, scan

• Scan and best fit to CAD model (electronic overlay)

• SPC included

• Easy reporting, but output to Excel

• Optional edge detection

• Supplied complete with PC keyboard and mouse

– monitor extra

Baty Readout OptionsThe readout options from Baty include a fully programmable unit with geometrical functions and a software module allowing direct

connection to a PC. All units are fully compatible allowing upgrades as required.

XLS Readout• A simple two axis digital readout for point to point X,Y

or R,A measurements

• Absolute or incremental mode with Inch / metric

conversion, Zero, preset and print functions. RS-232C

serial and parallel ports. Footswitch compatible

GXL /GXL-E Readout• Graphical display of measured feature

• Radius, angle, line, point, skew

• Inch, metric, polar, cart

• Data output to PC/printer

• Store inspection routines to

prompt operator

• Tolerancing

• Multi-language menu

• On-screen help

• Optional edge detection

BUK2012_P196-197.indd 196 23/01/2012 12:22

197

OPTICAL INSTRUMENTS


Baty Options & Accessories - Profile Projector

R14 / R400 ACCESSORIES

Code No Description

202-1327-1 Footswitch for GXL

ABFS-001 Footswitch for AB2 Fusion Systems

52-371 Protective cover – R14

350-035 Protective cover – R400 / SM350

SA-328 Cabinet stand

SA-250 Iris diaphragm

SA-256 Vee blocks

SA-258 Spring loaded centres

SA-259 Riser blocks 38mm (1⁄2") for SA-256

SA-152 Vice stage and vice

SA-260 Swivel vice

SA-276 Single vee and clamp (Vee parallel to optic axis)

SA-153 Fixture base

SA-527 Glass plate work holder

FIXTURE FAMILY ACCESSORIES

Code No Description

52-600 Self centering vice

52-601 Dual axis vee block and clamp to Ø 15mm

52-602 Dual axis vee block and clamp to Ø 30mm

52-603 Precision rotary base

52-604 Universal base

52-605 Precision ground steel alignment feature

52-606 Magnetic vee block

52-701 Dual axis vee block fitted with side base

SM350 ACCESSORIES

Code No Description

SA-245-2 Rotary glass stage

SA-370 Back stop

SA-371 Side stop

SA-196-EXT Dual vee block and centres

FM-2510 Open frame fixturing for 2510 stage

SA-551 Iris diaphragm for SM350

350-035 Protective cover SM350

SA-527 Rotary Axis SA-250 52-602

SA-256 / SA-258 52-701 /

52-604

SA-152 52-600 / 52-603

SA-260 52-605 SA-542 Large Vee Blocks

and Centres

SA-543 Riser Blocks

Rotary Glass Stage

SA-245-2

SA-370 Back Stop

SA-371 Side Stop

SA-196-EXT Dual Vee

Blocks and Centres

FM-2510 Open Frame

Fixturing

BUK2012_P196-197.indd 197 23/01/2012 12:22

198

OPTICAL INSTRUMENTS


Baty Vision Systems – VuMasterThis innovative British design combines a large measuring range with powerful Fusion Video Edge Detection tools in a cost effective bench top package.

VuMaster is a manual 2D vision system with a massive difference.

Due to the newly patented Colourmap™ scale system, the VuMaster does not have a conventional stage or encoders – just a floating measuring camera that moves anywhere in the measuring range. The result is fast, accurate, ‘non contact’ measurement over a much larger measuring range – 400mm x 300mm to be exact!

Because the camera moves and the part stays still, there is often no need for expensive and time consuming work holding devices.

Although VuMaster is manually* operated, inspection routines can be recorded and stored. When played back, these ‘programs’ guide the operator through a pre-defined inspection procedure recreating the same lighting conditions and using ‘Video Edge Detection’ to automatically ’capture’ feature data.

Finally, a report is generated in the form of a fully dimensioned drawing of the measured part.

Features• Large 400mm x 300mm measuring range• Patented measuring technology• Teach and repeat part programming• Video edge detection• Digital zoom• Fully integrated system – everything is

included: built-in PC, 19" flat screen monitor and printer

• Programmable segmented LEDlighting system

• Motorised autofocus• Image grab

* CNC option available

VuMaster

VUMASTERCode No DescriptionVM-4030-2D-M VuMaster Manual including 19" LCD monitor and PrinterVM-4030-2D-C VuMaster CNC including 19" LCD monitor and PrinterVI-Stand All steel machine stand with Granite topCAL-MAG-2 Glass calibration artefact

BUK2012_P198-199.indd 198 23/01/2012 12:23

199

OPTICAL INSTRUMENTS


Venture AB3-V

Baty Vision Systems – Venture & Fusion 3DBaty’s powerful Fusion software is also available with full 3D functionality for use with the Venture range of Vision systems.

The measured part can now be dimensioned in all three projections showing true 3D results.

Touch ProbeThe popular Renishaw Touch probe option

often helps to solve complex 3D measurement

applications. The software allows the use of both

touch probe and camera measurements in the same

inspection so features that are out of the camera’s

view can be measured without re-positioning

the part.

As with all Ventures, a high precision zoom lens

is featured as standard. This manual version has 6

preset zoom positions which provide a magnification

range from approx. 30x – 200x* which can be

extended with the use of auxiliary lenses. Each

preset position is pre-calibrated enabling the user to

quickly select the optimum magnification for each

measurement and continue measuring.

Easy ReportingIn addition to a graphical representation of the

measured part, detailed reports can be instantly

created showing the feature name, nominal

dimension, actual, error, upper and lower limits and

a green pass or red fail label for each measured

dimension in tabulated format. Geometric tolerance

details can also be displayed along with a thumbnail

view of the part and batch/customer information.

The entire report can be duplicated as an Excel

workbook for email.

Features• Fully dimensioned part view

• CAD import / export

• Profile scanning and best fit to CAD master

• SPC batch information including control charts

• Output to Excel™

• 64 LED programmable segmented surface

illumination

• Advanced video edge detection

• TTL light and collimated profile illumination

Venture AB3-V options• Motorised Z axis

• Autofocus

• Renishaw touch probe

• Manually indexable rotary axis

VENTURE AB3-V MANUAL

Code No Description

AB3-V Venture Manual with Fusion 3D software, 250mm x125mm stage, incl. PC and 2 x 19" monitors

3030 X,Y Stage upgrade to 300 x 300mm

CAL-MAG 2 Glass calibration artefact

BUK2012_P198-199.indd 199 23/01/2012 12:23

200

OPTICAL INSTRUMENTS


Baty Vision Systems – Venture & Fusion 3DVenture CNC models take the power of fusion software one stage further by completely automating the inspection process.

Standard CNC system features include:• Teach and Repeat programming• Programmable segmented LED lighting• High resolution 0.5µm scales for increased accuracy• CAD import / export • Scanning & best fitting• Fully dimensioned part view• SPC included• One click output to Excel™• Autofocus• 165mm Z axis measuring range on adjustable dovetail slide• 250mm x 125mm and 300mm x 300mm XY stages available

Automatic InspectionAdvanced features like scanning and best fitting can be done quickly without taking up the time of skilled operators.

CNC programming is a simple teach and repeat process. Just measure the part once and a full CNC program is created automatically. The zoom lens can also be controlled so that magnification changes are all recorded into the program.

Programmable Segmented LightLighting is critical to ensure that the correct edge is measured. Baty’s new programmable LED lighting head allows the user to define any segment pattern to be switched on. This means that oblique lighting conditions can be achieved to illuminate more difficult edges.

Segments can then be rotated and intensity varied to suit the radial position of the edge. Once set, the lighting condition for each measured feature is now automatically programmed and will be reproduced by the software each time a new part is measured. Through the lens (TTL) lighting is included for applications like blind bore measurement. 64 white LEDs are used to ensure Venture’s high quality colour image is achieved.

Only now can this functionality be combined with traditional touch probe technology to offer the ultimate in multi-sensing Vision systems – Venture.

Venture AB3-V-CNC

Baty’s programmable segmented LED

lighting

VENTURE AB3-V-CNCCode No DescriptionAB3-V-CNC Venture CNC with Fusion 3D software, 250mm x 125mm stage, incl. PC and 2 x 19" Monitors3030 X, Y Stage upgrade to 300mm x 300mmCAL-MAG 2 Glass calibration artefactTP-20 Kit Touch probe kit incl ref ball, module and stylus

BUK2012_P200-201.indd 200 27/01/2012 14:24

201

OPTICAL INSTRUMENTS


Venture Plus additional features include:• Rigid, low mass bridge construction

• Integral zoom optics

• 250mm Z axis measuring range

• 640mm x 600mm and 640mm x 900mm bridge formats available

• Supplied with machine stand

Baty Vision Systems – Venture PlusThe Venture Plus range includes all of the standard Venture features with a little more... measuring range, that is.

Large Measurement VolumeThe Venture Plus is available in four models:

VP-6460 with 640mm x 600mm x 250mm measuring range




The bridge type construction is all aluminium resulting in low inertia and low thermal mass. Air bearings are used on all axes and a granite Y beam is used for increased accuracy. This ensures that the machine will expand and contract uniformly with temperature changes ensuring minimal distortion and subsequent errors. Ambient temperature can be compensated for within the Fusion software making Venture Plus ideal for use on the shop floor.

Complete with our standard zoom optics and lighting, Venture Plus offers the same level of camera based functionality as every other Venture.

The use of a touch probe is optimised on a CNC system. Measurements from data points taken using the touch probe can be combined with those taken using Video Edge Detection for optimum speed and reduced inspection times.

A probe changer rack can be installed so that probe modules fitted with a variety of pre- calibrated styli can also be used in the same inspection. When a change of stylus is required, the system automatically puts the current probe module back in the rack and picks up the next to continue the inspection process. Only now can this functionality be combined with traditional touch probe technology to offer the ultimate in large format multi-sensing Vision systems – Venture Plus.

VENTURE PLUSCode No DescriptionAB 6460 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (640 x 600 x 250mm) AB 6490 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (640 x 900 x 250mm)AB 100100 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (1000 x 1000 x 400mm)AB 100150 Venture Plus CNC with Fusion software and Touch probe - includes PC and 2x19"monitors (1000 x 1500 x 400mm)CAL-MAG-2 Glass calibration artefact

BUK2012_P200-201.indd 201 23/01/2012 14:54

202

OPTICAL INSTRUMENTS


Baty Vision Systems – Technical Specification

MANUAL SYSTEMS

VM-4030 Vu Master VI-2510 Venture VI-3030 Venture

X, Y, Z measuring range (mm) 400 x 300 250 x 125 x 165 300 x 300 x 165

Workstage area (mm) 420 x 320 414 x 262 464 x 462

Max workpiece load (kg) 25 25 25

Drive type Manual Manual Manual

Bearings Air bearings Cross roller rail guide Cross roller rail guide

Max drive speed N/A N/A N/A

Camera type 2048 x 1590 pixel colour USB2 camera with 8 x 9mm chip and dynamic latch

Optics / lighting Fixed objective telecentric 6.5:1 detent zoom lens. Fully programmable software controlled

lens with programmable white LED segmented surface lighting head with understage and

LED lighting through the lens (TTL) lighting as standard

Resolution 0.001mm 0.0005mm 0.0005mm

Accuracy 7.5µm 2+L/100 2+L/100

Max field of view (FOV) 12mm* 16mm* 16mm*

Magnification 20 x 350x Optical zoom ratio 27x – 175x on 17’’ monitor

with digital zoom enhancement to over 1200x

Touch probe option available No Yes Yes

Probe type N/A Renishaw TP20 Renishaw TP20

Change rack compatible? N/A N/A N/A

*using optional 0.5x adapter lens

CNC SYSTEMS

VM-4030 Vu Master VI-2510 Venture VI-3030 Venture VI-6460 V Plus VI-6490 V Plus

X, Y, Z measuring range (mm) 400 x 300 250 x 125 x 165 300 x 300 x 165 640 x 600 x 250 640 x 900 x 250

Workstage area (mm) 420 x 320 414 x 262 464 x 462 700 x 940 700 x 1240

Max workpiece load (kg) 25 25 25 150 150

Drive type CNC / handwheel CNC / joystick CNC / joystick CNC / joystick CNC / joystick

Bearings Air bearings Cross roller rail guide Cross roller rail guide Air bearings Air bearings

Max drive speed 100mm/sec 200mm/sec 200mm/sec 500mm/sec 500mm/sec

Camera type 2048 x 1590 pixel colour USB2 camera with 8 x 9mm chip and dynamic latch

Optics / lighting Fixed objective telecentric 6.5:1 detent zoom lens. Fully programmable software controlled white LED segmented

lens with programmable surface lighting head with understage and through the lens (TTL) lighting as standard

LED lighting

Resolution 0.001mm 0.0005mm 0.0005mm 0.0005mm 0.0005mm

Accuracy 7.5µm 2+L/100 2+L/100 2.5+L/150 2.5+L/150

Max field of view (FOV) 12mm* 16mm* 16mm* 16mm* 16mm*

Magnification 20 x 350x Optical zoom ratio 27x - 175x on 17" monitor

with digital zoom enhancement to over 1200x

Touch probe option available No Yes Yes Yes Yes

Probe type N/A Renishaw TP20 Renishaw TP20 Renishaw TP20 Renishaw TP20

Change rack compatible? N/A Yes Yes Yes Yes

BUK2012_P202-203.indd 202 23/01/2012 12:26

OPTICAL INSTRUMENTS - pdfs.findtheneedle.co.ukpdfs.findtheneedle.co.uk/16707..pdf · OPTICAL...

Documents

Transcript of OPTICAL INSTRUMENTS - pdfs.findtheneedle.co.ukpdfs.findtheneedle.co.uk/16707..pdf · OPTICAL...