1

TV over Fiber

2

New Optical

OPT-51*

transmitter and receiver

* Introduction also on OPT-54 family

3

OPT-TX51

OPT-TX51

New Optical devices

4

1) Base Application for DTT+SAT2) “Heavy” Analogue TV Application3) Remote control room/CCTV 4) Ethernet Application

Typical application

5

1) Base Application for DTT+SAT2) “Heavy” Analogue TV Application3) Remote control room/CCTV 4) Ethernet Application

Typical application

6

Basic Application DTT+SAT

Starting from coaxial network…..

SAT DTT+Analogue*

* up to 8 analogue channels

7

…is possible to extend it in just one fiber !!!

Basic Application DTT+SAT

8

… or to bring TV signals from head station to many final user

Basic Application DTT+SAT

9

1) Input data:• Number of channels to be sent• Number of user • Users distances from the Head

2) Output data:• SNR of the FO link • RF input level to set• RF output level

Basic Application DTT+SAT

Easy FO system design

10

Number of digital channels:• SAT transponders 32 CH • DTT bouquets 6 CH• DTT + SAT 38 CH

16 users 12.8dB loss (6,4+6,4) 1km max length 0,5dB loss

~ Total 13,5dB optical loss

1) Input data:• Number of channels to be sent• Number of user • Users distances from the Head

Basic Application DTT+SAT

Easy FO system design

11

1) Input data:• 38CH• 13.5dB loss

2) DTT Output data:• Pin 99dBuV/CH• Pout 69dBuV/CH• DTT CNR 33dB

Basic Application DTT+SAT

Easy FO system design

12

1) Input data:• 38CH• 13.5dB loss

2) SAT Output data:• Pin 99dBuV/CH• Pout 69dBuV/CH• SAT CNR 24dB

Basic Application DTT+SAT

Easy FO system design

13

32 SAT 6 DTT

14 dB loss

69dBuV

99 dBuV

69dBuV 69dBuV

69dBuV

DTT 33dB CNRSAT 24dB CNR

1x16

Basic Application DTT+SAT

Summarizing…..

14

Basic Application DTT+SAT

Fracarro Designer Tool for SMATV system allow you to prepare offer for your customer

15

Basic Application DTT+SAT

Fracarro Designer Tool for SMATV system allow you to prepare offer for your customer

16

SAT DTT+Analogue

Basic Application Analogue+DTT+SAT

TERR input allows:• 8 Analogue CH with 4 way split• 4 Analogue CH with 8 way split• 2 Analogue CH with 16 way split

17

Basic Application Analogue+DTT+SAT

TERR input allows:• 8 Analogue CH with 4 way split• 4 Analogue CH with 8 way split• 2 Analogue CH with 16 way split

All the other digital programs (both SAT or DTT) that are transmitted must be set at a 10 dB lower level

18

SAT DTT+Analogue

Basic Application Analogue+DTT+SAT

80 Analogue Channels more, in the same fiber ???

Yes, is possible!!!!

19

1) Base Application for DTT+SAT2) “Heavy” Analogue TV Application3) Remote control room/CCTV 4) Ethernet Application

Typical application

20

Details on Transmitter

“Heavy” Analogue TV Application

OPTOPT

RFRF

RF_INRF_IN

OPT_OUTOPT_OUT

DTTDTT

SAT+DTT+ANSAT+DTT+AN

UP TO 80 Analogue CH

AUX_INAUX_IN

SATSAT

21

Details on Transmitter

“Heavy” Analogue TV Application

OPTOPT

RFRF

RF_INRF_IN

OPT_OUTOPT_OUT

DTTDTT

SAT+DTTSAT+DTT

+ “heavy” AN+ “heavy” AN

UP TO 80 Analogue CH

AUX_INAUX_IN

3rd FO 3rd FO windowwindow

2nd FO 2nd FO windowwindow2nd +3rd 2nd +3rd

FO FO windowwindow

SATSAT

22

Ricevitore

“Heavy” Analogue TV Application

Details on Receiver

SAT+DTTSAT+DTT

+ “heavy” AN+ “heavy” AN

SATSATDTTDTT

AUX_OUTAUX_OUT

UP TO max. 80

Analogue CH

””heavy” ANheavy” AN

23

Ricevitore

“Heavy” Analogue TV Application

Details on Receiver

SAT+DTTSAT+DTT

+ “heavy” AN+ “heavy” AN

SATSATDTTDTT

AUX_OUTAUX_OUT

UP TO max. 80

Analogue CH

3rd FO 3rd FO windowwindow

2nd FO 2nd FO windowwindow2nd +3rd 2nd +3rd

FO FO windowwindow

24

SAT

DTT

Many Analogue Channels more, in the same fiber

“Heavy” Analogue TV Application

Analogue

TX

RX RX RXRX

25

SAT

DTT

Many Analogue Channels more, in the same fiber

“Heavy” Analogue TV Application

Analogue

TX

RX RX RXRX

26

1) Base Application for DTT+SAT2) “Heavy” Analogue TV Application3) Remote control room/CCTV 4) Ethernet Application

Typical application

27

SAT

DTT

Remote control room

KTX

KRX

Additional channels

TX51

RX51 RX51 RX51 RX51

Additional channels from remote station

or CCTV

28

1) Base Application for DTT+SAT2) “Heavy” Analogue TV Application3) Remote control room/CCTV 4) Ethernet Application

Typical application

29

OLT

ONU

ONU

ONU

ONU

ONU

Ethernet Application

Ethernet application for PON (Pasive Optical Network)

SAT DTT

Ethernet

Ethernet

SAT +DTT

30

Key points for OPT-51 range

• 5 Inputs also DTT conversion embedded

• SAT and DTT equalizations before E/O conversion

• Analogue channels (TV/CCTV) supported

• AUX bidirectional Optical IN/OUT for:• more analogue channels managing• remote room with additional programs• remote CCTV streaming• Ethernet Networking on the same fiber

•

OPT-TX51 / OPT-RX51

31

Key points for OPT-51 range

• OPT-TX51 with main power supply (300mA@14V for LNB or Line Amplifier)

• OPT-RX51 remotely supplied (240mA@14V)

• Led ON (OPT-RX51) when input signal strong enough

OPT-TX51 / OPT-RX51

32

*Full family of new FO products

Transmitters Receivers

OPT-TX51

OPT-TX54

OPT-RX51

OPT-RX54

33

OPT-TX54 / OPT-RX54

• 5 Inputs also DTT conversion embedded

• SAT and DTT equalizations before E/O conversion

• Cost of OPT-TX54/OPT-RX54 is more effective

• OPT–TX54 and OPT-RX54 was developed for FO network where splicing cost aren’t a critical point of installation

• OPT-TX54 with main power supply (300mA@14V for LNB or line amplifier)

• OPT-RX54 remotely supplied (240mA@14V)

• Led ON (OPT-RX54) when input signal strong enough

Key points for OPT-54 range

34

Fibre advantages

• Only one fiber for all signals (SAT, DTT, Analogue, CCTV, Ethernet)• Low power consumption Green product• Immune on Electromagnetic noise• Ideal for long distances distribution• Electrical isolation between equipment on two sides• Water/humidity resistant• …….

OPT-TX51 / OPT-RX51

35

Target markets

• Villages• Skyscraper• Big Hotels• Airports• “Old” buildings• Protected Areas• Installation that need remote Headends• …….

OPT-TX51 / OPT-RX51

36

TV over Fiber