OPERATOR, MAINTENANCE & PARTS MANUAL … MAINTENANCE & PARTS MANUAL Rotary Hoe RTM120 & RTM 150 REAR...
Transcript of OPERATOR, MAINTENANCE & PARTS MANUAL … MAINTENANCE & PARTS MANUAL Rotary Hoe RTM120 & RTM 150 REAR...
OPERATOR, MAINTENANCE & PARTS MANUAL
Rotary HoeRTM120 & RTM 150
REAR 18 PARRAMATTA RD HOMEBUSH NSW 2140 T. 61 2 9746 9060 / F. 61 2 9746 [email protected] / WWW.SXM.COM.AU
Southern CroSS MoWerS PtY LtD t/A Southern CroSS AG MAChInerYABn 54 062 931 775
* Image depicts 4ft Rotary Hoe RTM120
TABLE OF CONTENTS
Introduction................................................................................................................................................................ 01
Safety •SafetyInstructions.......................................................................................................................................... 02
•GeneralSafetyGuidelines............................................................................................................................. 03
•Employer/ControllerResponsibilities……….....………………………………............................................... 04
•Supervision,InstructionandTraining……………………………………........................................................ 04
•Inspection,MaintenanceandRepair............................................................................................................. 04
•ServiceandMaintenanceSafety................................................................................................................... 04
•Start-UpSafety................................................................................................................................................ 05
•Operation.…………………………………………………………........................................................................ 05
•OperationSafety............................................................................................................................................. 05
•PersonalProtectiveEquipment(PPE)…………………………....................................................................... 05
•StorageandTransport………………………………………………................................................................... 05
•StorageSafety.............................……………………....................................................................................... 05
•TransportSafety...........................……………………...................................................................................... 05
•Modifications………………………………....................................................................................................... 06
•SafetySigns.................................................................................................................................................... 06
•InstallationofSafetySigns............................................................................................................................ 06
TechnicalSpecifications.............................................................................................................................................07
AssemblyInstructions(Step1-7)........…………….................................................................................................... 07
•Step8PTOShaftFirstFitting........................................................................................................................ 09
PriortoOperation………………………………........................................................................................................... 10
Preparation………………………………………………………………………............................................................... 11
StartingandStoppingSafety.……………………………………………….................................................................. 11
TransportationSafety.……………………....................................................................………………………………… 13
AttachingtoTractor.………………………………………………………....................................................................... 14
OperatingInstructions............................................................................................................................................... 14
EquipmentMatching..................................................................................................................................................14
FieldOperation.......................................................................................................................................................... 15
PreoperationalAdjustments..................................................................................................................................... 16
StorageSafety.…………………………………………................................................................................................. 16
MaintenanceSafety.…………………………………………......................................................................................... 17
SafetyDecalLocations.............................................................................................................................................. 18
RotaryHoeSafetyDecals................……………………………………………............................................................. 19
MaintenanceSchedule..........………………………………………………...................................................................20
TroubleshootingGuide.……………………………………………………..................................................................... 21
ForFurtherInformation.....................................................................…………………………………………………....22
RotaryHoePartsDiagram..........………….…...………………………………............................................................. 23
RotaryHoePartsList...............……………….…...……………………………….......................................................... 24
Warranty&RegisterYourWarranty.……………….…...…………………………....................................................... 26
WarrantyProcess...............………………..………………………………..................................................................... 27
Manufacturers statement: Duetocontinuing improvementsSouthernCrossAgMachineryPtyLtdreservesthe right to modify machinery design and specifications provided herein without any preliminary notice.Informationprovidedhereinisofdescriptivenature.
/ 01
WarningREADTHEOPERATOR,MAINTENANCEANDPARTSMANUAL BEFOREUSINGTHErotArY hoe.
INTRODUCTION
SouthernCrossAgMachineryRotaryHoesareavailablein4ft(45HP)and5ft(45HP).
ThismanualcontainsvaluableinformationaboutyournewRotaryHoe.Ithasbeencarefullypreparedtogiveyouhelpfulsuggestionsforoperating,adjustingandservicingyourRotaryHoe.Keepthismanualhandyforfrequentreference.Allnewoperatorsorownersmustreviewthemanualbeforeusingtheequipmentandatleastannuallythereafter.
Itistheowner’sand/oroperator’sresponsibilityto;•Readandunderstandtheinformationcontainedinthismanual.•Operate, lubricate, assemble andmaintain the equipment in accordance with all instructions and safetyproceduresinthismanual.•Inspecttheequipmentandreplaceorrepairanypartsthataredamagedorwornwhichcouldcausedamage,weartootherparts,orcauseasafetyhazard.
PleasecontactyourSouthernCrossAgMachineryDealerifyouneedanyfurtherassistancewithyourRotaryHoeoradditionalcopiesofthemanual.Visitourwebsitewww.sxm.com.auforacompletelistofdealersinyourarea.Youcanalsodownloadadditionalcopiesofthismanualfromourwebsite.
Thedirectionsleft,right,frontandrear,asmentionedthroughoutthismanual,areseenasfacinginthedirectionoftraveloftheimplement.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 02
SAFETY
Safety InstructionsSouthern Cross Ag Machinery encourages good safety practices. Good safety practices not only protectyoubutalso thepeoplearoundyou.Pleaseensure thateveryoneusingthisequipment is familiarwith therecommendedoperatingandmaintenanceprocedures,hasreadandunderstoodtheOperatorsManualandfollowsall thesafetyprecautions.Mostaccidents canbeprevented.Donot risk serious injuryordeathbyignoringgoodsafetypractices.
The alert symbol is used throughout thismanual andon the product safety decals. This symbol indicatesattentionisrequiredandidentifieshazardsconcerningyourpersonalsafetyandthesafetyofothers.Pleasefollowtherecommendedprecautions.
Thesafetyalertsymbolmeans… ATTENTION!BECOMEALERT!YOURSAFETYISINVOLVED!
CautionTheCautionSymbolindicatesapotentiallyhazardoussituationthat,ifnotavoided,mayresult inminorormoderateinjury.Itmayalsobeusedtoalertagainstunsafepractices.
WarningTheWarningSymbolindicatesapotentiallyhazardoussituationthat,ifnotavoided,could resultindeathorseriousinjuryandincludeshazardsthatareexposedwhenguardsare removed.Itmayalsobeusedtoalertagainstunsafepractices.
DangerTheDangerSymbolindicatesanimminentlyhazardoussituationthat,ifnotavoidedwillresultin deathorseriousinjury.Thissignalwordistobelimitedtothemostextremesituations,typicallyformachinecomponentsthat,forfunctionalpurposes,cannotbeguarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 03
SAFETY continued
General Safety Guidelines•Haveafirst-aidkitavailableforuseandknowhowtouseit.
•Haveafireextinguisheravailable,storedinahighlyvisiblelocationandknowhowtouseit.
•Wearappropriateprotectivegear.Thislistmayincludebutisnotlimitedto: – hard hat –protectiveshoeswithslipresistantsolesandsteelcaps –protectiveglassesorgoggles –heavygloves –wetweathergear –hearingprotection –respiratororfiltermask
•Read and understand the Operator’sManual and all safety decals before operating, servicing, adjusting,repairingorhitchingtheequipment.
•DonotattemptanyunauthorisedmodificationstoyourSouthernCrossAgMachineryproductasthiscouldaffectfunctionorsafetyandcouldaffectthelifeoftheequipment.
•NeverstartoroperatetheRotaryHoeexceptfromtheoperator’sstationonthepowerunit.
•Inspectandcleantheworkingareabeforeoperating.Removeallobstructionssuchasrocks,stumpsandwire.
•Keephands,feet,clothing,andhairawayfrommovingparts.
•Ensurebystandersareclearoftheareabeforeoperating.Aminimumdistanceof100metresshouldbekeptfromallbystanderswhenRotaryHoeisinoperation.
•Never operate this equipment while using alcoholic beverages or drugs that can hinder alertness orcoordination.Consultyourdoctoraboutoperatingthismachinewhiletakinganymedication.
•Undernocircumstancesshouldchildrenundertheageof18beallowedtoworkwithoraroundthisequipment.Donotallowanyonetooperateorassemblethisequipmentuntiltheyhavereadandunderstoodthismanual.
•Thisequipmentisdangeroustoanyoneunfamiliarwithitsoperation.Theoperatorshouldberesponsible,properly qualified and physically able person familiar with farm machinery and competent in this equipment’soperation.
•All new operators or owners must review the manual before using the equipment and at least annuallythereafter.
•Inordertoprovideaclearview,certainillustrationsinthismanualmayshowanassemblywithasafetyguardremoved.Equipmentshouldneverbeoperatedinthiscondition.Keepallguardsinplace.Ifguardremovalbecomesnecessaryforrepairs,reinstalltheguardspriortouse.
•Replaceanysafetydecalthatisnotlegibleorismissing.Thelocationsofsuchsafetydecalsareindicatedinthismanual.
•Neverexceedthelimitsofapieceofmachinery.Ifitsabilitytodoajob,ortodososafely,isinquestion–DON’TTRYIT.
•In addition to the design of this implement, safety decals and safety equipment, accident prevention isdependentupontheawareness,commonsense,forethoughts,andpropertrainingofeveryoneinvolvedintheoperation,transport,maintenanceandstorageofthemachine.Alsorefertosafetymessagesandoperatinginstructionsineachoftheappropriatesectionsofthetractormanual.PaycloseattentiontothesafetydecalsaffixedtothetractorandtheRotaryHoe
/ 04
SAFETY continued
Employer/Controller ResponsibilitiesOH&Slegislationplacesobligationsontheemployer,orthecontrolleroftheRotaryHoe,toidentifythehazardsandcontroltherisksassociatedwiththeuseoftheRotaryHoeintheirworkplaceandtodosoinaccordancewiththemanufacturer’sinstructions.
WhenpurchasingaRotaryHoe:
•Ensurethemanufacturer’sinstructionsareprovidedatthepointofpurchase.
•EnsuretheRotaryHoeconformstoindustrysafetystandards.
•Discussyourneedswiththesupplier,toensuretheRotaryHoeiscompatiblewiththepowerofyourtractorandisappropriatefortheintendedapplication–considerthespeedofyourtractor’sPTOanditscompatibilitywiththeRotaryHoe’sgearbox.Seepage7fordetails.
•SeekpracticaladviceandinstructionfromthesupplierontheuseandlimitationsoftheRotaryHoe.Ifyouarehiring,leasingorborrowingaRotaryHoeonatemporarybasis,getsafeuseinstructionsfromthepersonsupplyingit.
•TheemployermustprovidesafetyinstructionstoallthoseinvolvedinusingaRotaryHoe.
•AcopyofsafetyinstructionsmustbekeptingoodconditionwiththeRotaryHoe.
•Generally, the safety instructions should be the manufacturer’s instructions. Any variations from themanufacturer’s instructionsmust be based on a risk assessment andmust not remove any of the safetyfeaturesnorexposeanyonetorisks.
Supervision, Instruction and TrainingTheemployermustprovidesafesystemsofwork,adequatesupervision,instructionandtrainingtoallthoseinvolved inusingaRotaryHoe.Theymustbe instructed in thesafeoperationof theRotaryHoe, includinghazardsspecifictotheworkplace,includingtheterrain,stabilityofthetractor,workingenvironmentandthelike.TheemployershouldensurethateveryoneachievesalevelofunderstandingthatenablesthemtosafelyandcompetentlyoperatetheRotaryHoe.
Inspection, Maintenance and Repair•TheRotaryHoemustbeinspectedaccordingtothemanufacturer’sinstructions,priortouse.Seepage20forMaintenanceInstructions.
•Allproblemsidentifiedmustberectified,priortouse.
•TheRotaryHoemustbemaintainedaccordingtothemanufacturer’sinstructions.
•Replacementpartsmustbetotheoriginalmanufacturer’sspecificationsortheirequivalent.
•Safetysignsanddecalsshouldbelegible,maintainedandwherenecessaryreplaced.
•Repairsshouldbecarriedoutbyacompetentperson.
•WhensuspendingtheRotaryHoeformaintenanceorrepair,whetherattachedtothetractororsuspendedinanotherway,adequatesafetystandsmustbeusedtopreventinadvertentloweringoftheRotaryHoe.
Service and Maintenance Safety•Stopengine,setbrake,removeignitionkeyandwaitforallmovingpartstostopbeforeservicing,adjusting,repairingorunplugging.
•Supporttheequipmentwithblocksorsafetystandsbeforeworkingbeneathit.
•Followgoodshoppracticesincluding: –keepserviceareacleananddry –besureelectricaloutletsandtoolsareproperlygrounded –useadequatelightforthejob.
•Useonlytools,jacksandhoistsofsufficientcapacityforthejob.
•Replaceandsecureallshieldsremovedduringservicingbeforeoperating.
•Useheavyleatherglovestohandlesharpobjects.
/ 05
SAFETY continued
Start-up Safety•Donotletinexperiencedoperatorsorchildrenusethisequipment.
•Placealltractorandmachinecontrolsinneutralbeforestarting.
•OperateonlywithRollOverProtectiveSystem(ROPS)andseatbeltequippedtractors.
•Donotoperateinsideabuildingunlessthereisadequateventilation.
•Ensureallshieldsareinplaceandingoodconditionbeforeoperating.
•StayclearofPTOshaftandmachinewhenengagingPTO.
OperationPriortouse,theRotaryHoeshouldbeinspectedtoensureitisworkingcorrectly.Allsafetyfeaturesmustbeincludedinthisinspection.Ifanysafetyfeatureisnotworkingcorrectly,theRotaryHoemustnotbeused.TheRotaryHoemustbeoperatedaccordingtothemanufacturer’sinstructions.
Theoperatormustensurethatno-oneisexposedtorisksarisingfromtheoperationoftheRotaryHoe.
Additionalsafetycontrolsmayberequiredwhenoperatinginthevicinityofpeopleortraffic–e.g.alongsidehighways,roadsorotherpublicareas.
Where adjustable or removable guarding is provided for specific applications, such as vineyards andhorticulture,andtheguardinghasbeenremovedorisnolongereffective,appropriatecontrolmeasuresmustbeimplemented.Thesecontrolsmustensurethattheriskof injuryiseliminatedorcontrolled.BeforeusingaRotaryHoeinanapplicationotherthanthatoutlinedabove,theguardsmustbereadjustedorreplacedsoastobeeffective.
Operation Safety•Donotpermitriders.
•Donotwearloosefittingclothingduringoperation.
•Neveroperateover540PTOrpmspeed.
•Neveroperatetheequipmentintheraisedposition.
Personal Protective Equipment (PPE)Priortouse,ariskassessmentmustbeundertakentodeterminetheappropriatePPErequired.AnyidentifiedPPEmustbeprovidedbytheemployerandmustbeusedbythoseinvolvedintheoperationandmaintenanceoftheRotaryHoe.ExamplesofPPEareappropriatefootwearandhearing&eyeprotection.
Storage and TransportWhennotinuse,theRotaryHoemustbetransportedandstoredaccordingtothemanufacturer’sinstructions.RequirementsmaydifferwhentransportingaRotaryHoewithinapropertyandonapublicroad–youmustcomplywithallstatutoryrequirements.
Storage Safety•Storetheunitinanareaawayfromhumanactivity.
•Donotpermitchildrentoplayonoraroundthestoredmachine.
•Supporttheframeonstandsandblockstoprovideasecurebase.
Transport Safety•ReviewTransportSafetyinstructionsintractormanualbeforemoving.
•Checkwithlocalauthoritiesregardingtransportonpublicroads.Obeyallapplicablelawsandregulations.
•MakesuretheSMV(SlowMovingVehicle)emblemandallthelightsandreflectorsthatarerequiredbythelocalhighwayandtransportauthoritiesareinplace,areclean,andcanbeseenclearlybyallovertakingandoncomingtraffic.
•Neverhavetheequipmentinoperationduringtransport.
•Alwaystravelatasafespeed.
/ 06
SAFETY continued
ModificationsARotaryHoeshouldnotbemodifiedoraltered.However,ifitisnecessarytomakemodifications,theymustbedonebyacompetentpersonandbasedonariskassessment.
Beforeanymodificationsaredone,contactthemanufacturerorsupplier.
Anyonewhoundertakesmodificationssubsequentlyassumestheroleandresponsibilitiesofthedesignerandmanufacturer.ThisdoesnotincludeshorteningaPTOshaftandcoverwhenfirstinstallingtheRotaryHoeonatractor(refertopage09fordetails).
TheinstructionsrelatingtotheRotaryHoeanditsusemayneedtoberevisedfollowingamodification.
AnymodificationsmadewithoutmanufacturersapprovalwillvoidWarranty.
Safety Signs•Referpages18-19fortheapproximatelocationanddetailofsafetysigns.
•Keepallsafetysignscleanandlegibleandreplaceanythataredamagedormissing.
•When original parts are replaced, any safety signs affixed to those parts should be replaced as well.Replacementsafetysignsareavailablefromyourlocaldealer.
Installation of Safety Signs•Toinstallsafetysigns,ensuretheinstallationareaiscleananddry.Decideontheexactpositionbeforeyouremovethebackingpaper.Removethesmallestportionofthesplitbackingpaperandalignoverthespecifiedarea.Carefullypressinplace.
•Slowlypeelbacktheremainingpaperandsmooththeremainingportioninplace.Smallairpocketscanbepiercedwithapinandsmoothedout.
/ 07
TECHNICAL SPECIFICATIONS
MODEL RTM120 RTM150
WorkingWidth(cm) 120 150
BladesShaftSpeed(rpm) 210 210
NumberofBlades 24 32
TillingDepth(cm) 8-12 8-12
TractorPowerRange 20-45 35-45
GrossWeight(kg) 175 210
ASSEMBLY INSTRUCTIONS
Installgearboxsafetyguardbackingplatetogearboxusingthefoursuppliedalanbolts.
Installslipclutch(Figure2)togearboxinputshaftandinsert2xhightensileretainerboltstoclutchensuringtheypassthroughthegrooveofthegearboxinputshaft.Tightento150ft/lb.
FIGURE 1
FIGURE 2
/08
ASSEMBLY INSTRUCTIONS continued
Install clutch safety guard to backing plate using the three supplied bolts, flat and springwashers as per Figure3.
InstallthreepointlinkageAframetomainbodyofRotaryHoeusingthesixsuppliedhightensileboltsandnylocknutsseeFigure4.
ThemachineisshippedwiththePTOshaftnotinstalled.ToinstallthePTOdrivelineonthemachine,followthisprocedure.
1.Cleartheareaofbystanders,especiallysmallchildren.
2.Cleanthesplinesontheyokeandtheinputshaft.
3.Alignthesplinesontheyokeandtheshaft.
4.AttachthedrivelinetotheRotaryHoebydepressingthetaperedpinandslidingtheyokeontotheslipclutchinputshaft.Lineupthepinwiththegrooveintheslipclutchinputshaftandfastenwiththetaperedpinbyreleasingwhenincorrectposition.
5.Besuretheyokeislockedinposition.Pullontheyoketobesurethepinclicksintoposition.
6.BesurethatthePTOshaftistheappropriatelengthforthetractor/RotaryHoecombination.RefertoDrivelineDimensionsSectionfordetails.Seepage09fordetails.
FIGURE 3 FIGURE 4
/ 096
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
ASSEMBLY INSTRUCTIONS continued
STEP 8 – PTO SHAFT FIRST FITTINGIftractorandRotaryHoehaveneverbeenusedtogetherbefore,pleasefollowtheinstructionsbelow:
a.Separatetheinnerandouterhalvesofthedriveshaft.
b.AttachthetractorendofthedriveshafttothetractorPTOoutputshaftandtheRotaryHoehalfto thegearboxinputshaftorslipclutch.
c.WiththeRotaryHoeintheoperatingpositionholdtheshafthalvesparalleltoeachothertocheck thatthetwosectionsofthedriveshaftdonotclosecompletelynorextendtoapointlessthan onethirdoftheslidingsection.
d.RepeatStep(c)withRotaryHoeinfullyraisedposition.
WARNING!refer to Maintenance Safety(pg.17)regardingworkingonormaintainingaRotaryHoewhenraisedusingthetractorthreepointlinkage.
e.IfthePTOshaftisdeterminedtobetoolong,cutequalamountsfrombothinnerandouterhalfshaftsandsafetyguardsusingadrop-saworhacksaw.Removeanyresidualburrsorfillingsfromcuttingandapplygreasetobothinnerandoutershafts.
f.IfthePTOshaftislessthanonethirdofthelengthoftheengagedslidingsection,pleasecontactyourdealer,asitmaybenecessarytoreplacewithalongerdriveshaft.
Thediagramfeaturedleftshowstheminimumengagedlengthfortri-lobaland4-toothstyle PTOshafts.
Note: Drawingunguardedschematiconly.NeveruseaPTOshaftwithoutapproved safetyguarding.
1/3 1/3 1/3
1/3
/ 10
PRIOR TO OPERATION
BEFORE PUTTING ROTARY HOE INTO SERVICE IMPORTANT INSTRUCTIONS PRIOR TO OPERATING MUST BE FOLLOWED.
ROTARY HOE SHIPPED WITHOUT OIL IN GEAR BOX AND WITHOUT GREASE IN GREASE FITTINGS. UNIT MUST BE SERVICED BEFORE USING.
FillGearboxandchaindrivehousingusingMultipurposeGearOil(85/140).ForallGreaseFittingsuse ahigh-temp/multipurposegrease.
STEP 1 PlaceRotaryHoesothatthemachineissecureandlevel.
STEP 2 Removethepluglocatedattopofgearbox.
STEP 3 Fillgearboxusing1000mlofmultipurposegearoil.
STEP 4 Replaceplug(locatedattopofgearbox)andcleanoffanyexcessoil.
STEP 5Removepluglocatedatthetopofthechaindrivehousing.
STEP 6Removedrainpluglocatedatthebottomofthechaindrivehousing.
STEP 7Fillchaindrivehousingwith2000mlofmultipurposegearoiloruntiloilleaksfrombottomplug.
STEP 8Greasethefollowingpoints: *BothUniversalJointsandSafetyGuardgreasepointsonthePTOShaft. *Mainbearinglocatedonrightsideofmachine
STEP 9 Inspectallguardstoinsuretheyareingoodworkingorderandproperlysecured.Ifnotreplacebeforeusing.
STEP 10 Checkallboltsandnutstoinsuretheyaretightandsecure.
STEP 11SetcuttingdepthofRotaryHoeequallyoneachsideusingdepthgaugeskids.
CAUTIONDONOToverfillgearbox.Thiscouldcausedamagetooilsealsandcancausepermanent damagetothegearbox.Anydefectsorfailurescausedbyoverfillingwillnotbecovered underwarranty
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 11
PREPARATION
Never operate the tractor and Rotary Hoe until you have read and completely understand thismanual,theTractorOperator’sManualandeachofthemessagesfoundonthesafetydecalsonthetractor and rotary hoe.
Personalprotectionequipmentincludinghardhat,safetyglasses,safetyshoes,hearingprotectionandglovesare recommended during assembly, installation, operation, adjustment, maintenance, repairing, removal, ormoving the implement.Donotwear loosefittingclothingor jewelleryandbesure to contain longhairaroundequipment.
PROLONGEDEXPOSURETOLOUDNOISEMAYCAUSEPERMANENTHEARINGLOSS!TractorswithorwithoutRotaryHoesattachedcanoftencreateenoughnoisetocausepermanenthearingloss.Werecommendthatyouusehearingprotectionatalltimes.Long-termexposuretonoiselevelsover80dbcancauseseverehearingloss.
NOTE: Hearinglossfromloudnoises(fromtractors,chain-saws,radios,andothersourcesclosetotheear)iscumulativeoveralifetime,withnochanceofnaturalrecovery.
Alwayswearyourseatbelt.SeriousinjuryorevendeathcouldresultfromfallingoffthetractorparticularlyduringarolloverwhentheoperatorcouldbetrappedundertheROPSorthetractor.
Clearareatobecutofstones,branchesandotherdebristhatmightbethrowncausinginjuryordamage.
Operateonlyindaylight.
EnsureRotaryHoeisproperlymounted,adjustedandingoodoperatingcondition.
Ensurethatallsafetyguardsandsafetydecalsareproperlyinstalledandingoodcondition.
STARTING AND STOPPING SAFETY
CheckthetractormasterguardoverthePTOshaft.Makesureitisingoodconditionandfastenedsecurelytothetractor.Purchaseanewguardifoldguardisdamagedormissing.
Alltractorsthatarenotequippedwitha“live”PowerTakeOff(PTO)needtobeequippedwithanover-runningPTOclutch.Theseareavailablethroughmostfarmmachinerydealers.
NOTE:Theadditionofanover-runningPTOclutchmaychangethelengthofthePTOdrivelinerequired.Payextraattention to the instructionsonthePTOdriveline installationreferpage09.Besure that thedrivelinesystemguardingissufficient.
RotaryHoeoperatingpowerissuppliedfromthetractorPTO.RefertoyourtractormanualforPTOengagementanddisengagementinstructions.KnowhowtostopthetractorandRotaryHoequicklyincaseofanemergency.
TheengineRPMshouldalwaysbeatidlespeedwhenengagingthePTO.Onceengagedandyouarereadytostartoperating,increasethePTOspeedtoapproximately540RPMandmaintainthroughouttheoperationofthemachine.
Theuseofthisequipment issusceptibletocertainhazardsthatcannotbeprotectedagainstbymechanicalmeansorproductdesign.Alloperatorsofthisequipmentmustreadandunderstandthisentiremanual,payingparticularattentiontosafetyandoperatinginstructions,priortousing.
Most accidents occur becauseof neglect or carelessness. Keep all assistants andbystanders onehundredmetresfromtheoperatingRotaryHoe.Whenmachineisoperatedinpopulatedareaswherethrownobjectscouldinjurepersonsorproperty,operationmustbestoppedifanyonecomeswithinonehundredmetres.
TheRotaryHoeisdesignedfortheuseontractorswith540-RPMpowertakeoff.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 12
STARTING AND STOPPING SAFETY continued
Installandsecureallguardsandshieldsbeforestartingoroperating.Thedischargeguard,drivelineguardsincludingslipclutchsafetyguardandtractorguardsshouldbeusedandmaintainedingoodworkingcondition.Theyshouldbe inspectedcarefullydaily formissingorbrokencables, chainlinks,shieldsandguards.Wornitemsmustbereplacedatoncetoreducethepossibilityofinjury.
DisengagePowerTakeOff(PTO)andplacetractortransmissioninneutralbeforeattemptingtostartengine.
Manyvariedobjects,suchaswire,cable,ropeorchainscanbecomeentangledintheworkingpartsof theRotaryHoe.Theseobjectscouldthenswingoutsidethehousingatagreatervelocitythantheblades.Suchanoccurrenceisextremelyhazardous.Inspecttheareaforsuchobjectsbeforeoperating.Removeanyobjectsfromthesite.
Neverallowthecuttingbladetocontactobjects.Cuthigherfirst,allowingRotaryHoetoclearsuchhiddenobjects.Neverassumeanareaisclear.Alwayscheck!
Alwaysstopthetractor,disengagePTO,allowcutterbladestocometoacompletestop,lowerimplementtotheground,setparkbrake,shutoffthetractorengineandremovetheignitionkeybeforedismountingtractor.Neverleaveequipmentunattendedwhilethetractorisrunning.
NeverplacehandsorfeetinRotaryHoe.Stayclearofallmovingparts.
Donotreachorplaceanypartofyourbodyundertheequipmentuntilitisblockedsecurely.
DonotallowridersontheRotaryHoeortractoratanytime.Thereisnosafeplaceforriders.
Donotoperateunlessallpersonnel,livestockandpetsareatleastonehundredmetresawaytopreventinjurybythrownobjects.Neverdirectthedischargechutetowardsanyone.
NeveroperatetractorandRotaryHoeundertreeswithlowhanginglimbs.OperatorscanbeknockedoffthetractorandthenberunoverbytheRotaryHoe.
Therotatingpartsofthismachinehavebeendesignedandtestedforruggeduse.However,theycouldfailuponimpactwithheavy,solidobjectssuchassteel,concrete,rocksorstumps.Toreducethepossibilityofpropertydamage,seriousinjuryorevendeathneverallowthecuttingbladestocomeincontactwithsuchobjects.
StopRotaryHoeandtractorimmediatelyuponstrikinganobstruction.Turnengineoff,removekey,engageparkbraketheninspectandrepairanydamagebeforeresumingoperation.
Stayalertforuneventerrain,holes,rootsandotherhiddenhazards.Keepawayfromdrop-offsandhazardsthatcouldcauseroll-over.Useextremecautionandmaintainminimumgroundspeedwhentransportingoroperatingonhillsides,overroughgroundandwhenoperatingclosetoditchesorfences.Becarefulandslowdownwhenturningsharpcornersandchangingdirectiononslopes.Donotstartorstopsuddenlyonslopesandavoidoperatingonsteepslopes.Inextremelyuneventerrain,rearwheelweights,fronttractorweightsand/ortireballastshouldbeusedtoimprovestability.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 13
TRANSPORT SAFETY
Alwaysobservestateandlocallawsgoverninghighwaysafetyandthetraveloffarmmachineryonpublicroads.
Whendrivingthetractorandequipmentonroadsorhighwaysuseflashingamberwarninglightsandaslowmovingvehicle(SMV)identificationemblem.Donotexceed20kph.Reducespeedonroughroadsandsurfaces.
Planyourroutetoavoidheavytraffic.
Alwaysinstalltransportlocks,pinsorbracketsbeforetransporting.
Donotdrinkanddrive.
Beasafeandcourteousdriver.Alwaysyieldtooncomingtrafficinallcircumstances,includingnarrowbridges,intersectionsetc.Watchfortrafficwhencrossingoroperatingincloseproximitytoroadways.
Use extreme care and maintain minimum ground speed when operating close to ditches and or fences. Becarefulwhenturningsharpcorners.
NeverallowridersoneithertractororRotaryHoe.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 14
ATTACHING TO TRACTOR
WARNINGNeverstandbetweentractorandRotaryHoewhilebackingthetractoruptothehitch
STEP 1 Attachtotractor’sthreepointhitchasdescribedintheTractor’sOperator’sManual.
STEP 2 Applyanymultipurposegreasetotheoutsideofthemale(inner)PTOshaftsection. AssemblePTOshaftandinstallonRotaryHoeandtractor.
STEP 3Pull shaft on the tractor side of the PTO shaft yoke to be sure it has locked in place. Make certain PTO shaftguardsareinplaceandgoodworkingcondition.RepeatthissameprocessforthePTOshaftconnectionto the rotary hoe.
WARNINGFailuretoinstalltheretainingcliporquickcoupleronthegearboxinputshaftwouldallowthedrivelinetoswingfreelycausingpossibleinjuryordeath.
OPERATING INSTRUCTIONS
ThisRotaryHoehasbeendesignedforthecultivationofsoftsoilsorpreviouslypreparedsoilsthataresuitablefortheoperationofaRotaryHoe.UseofyourRotaryHoeinhardorcompactedsoilsmaydamagetheRotaryHoeandvoidyourWarranty.
TheSouthernCrossAgMachineryRotaryHoeconsistsofarotatingdrumthatisequippedwithbentbladesforbreakingupandlevellingsoil.Thebladesareturnedthroughthesoilwhilethemachinemovesovertheworkingarea.ADragShieldisusedtomaintainalevelseedbed.RotationalpowertothedrumisprovidedbythePTOonthetractor.Thepoweristransmittedthroughthegearboxinthecentreofthemachinetothechaindrivedowntheside.
The current operating speed is 1.2-1.5 km/hr. Exceeding this operating travel speed may cause irreparable damage and void your Warranty.
EqUIPMENT MATCHING
To insure the safe and reliable operation of the Rotary Tiller, it is necessary to use a tractor with correctspecifications.Usethefollowinglistasaguideinselectingatractortouseonthemachine.
1. Horsepower: Use TableOne as a guide in selecting a tractor horsepower appropriate for yourwidth ofmachine.UseonlysmallAgriculturaltractorsonthismachine.
TABLE ONE – HORSEPOWER VS. WIDTH
MODEL WIDTH HORSEPOWER
RTM120 4ft(1.2m) 20-45
RTM150 5ft(1.5m) 30-45
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 15
EqUIPMENT MATCHING continued
ALERT! Donotexceedtherecommendedhorsepowerlevels.Theuseofexcessivehorsepower willvoidtheWarranty.
2. Three-Point Hitch:TheRotaryHoeisequippedwithaCategory1,3-pointhitch.Besurethetractor3-pointhitchisintheCategory1configuration.Installtheliftarmblocksorshortenthestopchainstoplacethearmsintothenon-swayconfiguration.Refertothetractormanualfordetails.
3. Load Sensing Hydraulics: Manynewertractorsareequippedwith“LoadingSensing”hydraulics. It is theresponsibilityoftheoperatortosetthetractorhydraulicsystemtoprovide“float”onthe3-pointhitch.thefloatfeaturewillallowthemachinetofollowthegroundcontoursduringoperation.
4. PTO Shaft: Thetractormusthavea1-3/8”6spline540rpmPTOshafttofitthedrivelineshaftsuppliedwiththemachine.Donotuseshaftadaptersoroperateatanyotherspeed.ItisnotrecommendedthatatractorwithvariablespeedPTO’sbeusedontheTiller.Operatingatspeedsfasterthan540rpmwilloverloadthedrivetrainandleadtoearlyfailures.
FIELD OPERATION
Eachoperatorshouldreviewthissectionofthemanualannuallyandasoftenasrequiredtobefamiliarwiththemachine.Whenusing,followthisprocedure:
1.Reviewsafetyinstructionsreferpage02.
2.Attachthetractortothemachine.
3.BeforegoingtothefieldreviewTransportingSectiononpage5and13,pullintothefieldandpositionthemachineinalevelarea.
4.Lowerintoworkingposition.
5.Setthemachine.
–Depth:UsetheDepthGaugeShoesoneachsidetosettheoperatingdepth.
–DragShield:AdjustthechainintheAdjustmentBrackettosettheheightsoftheDragShield.SettheDragShieldtojustcontactthetilledsoilwhenoperating.
6.Aligntheunitwiththeworkingarea.
7.StartingMachine:
–Runtheengineatlowidle
–SlowlyengagethePTOcontroltostartthemachine
–SlowlybringtheenginetotheratedPTOspeed.Neverexceedratedspeed.
–Lowerthemachinetothegroundandproceeddownthefield.
8.StoppingtheMachine:
–Slowlydecreaseenginespeedtolowidle
–Raisemachineoutoftheground
–DisengagePTOclutchslowly
9.GroundSpeed:Travelcanvarybetween1.2-1.5km/hrdependingonthesoilandterrainconditions.Itistheresponsibiltyoftheoperatortonotetheconditionofthejobbeingdoneandsetthespeedtoobtainaqualitytillingjobandmaintaincontrolofthemachine.Thespeedcanbeincreasedtooptimisetilling.Decreasespeedifyouwantthesoilworkedtoafinertexture.
10.OperatingHints:
–Determinethemoisturecontentofthesoilbeforestarting.Soilthatistoowetwill”clogup”ontherotorbladesmakingtillingimpossible.Sandysoilsnormallycanbeworkedbetterthanheavyclayorloamsoils.Itistheresponsibilityoftheoperatortodeterminethesoiltypeandmoisturecontentbeforestarting.Itmaybenecessarytowaitforthesoiltodryoutbeforestartingtowork.
–Alwaysremoveheavycropcover,allgrassandweeds,beforestartingtopreventrotorclogging.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 16
FIELD OPERATION continued
10.OperatingHints(continued):
–Therotationofthetynespropelthemachineintheforwarddirection.Alwaysusethetractortransmissiontocontrolthespeedofforwardtravel.
–AlwaysdisengagethePTOcontrolandraisethemachineoutofthegroundbeforedepressingthemasterclutchonthetractor.
–Uselowgearonthetractortostartthejob.Increasethespeedofforwardtravelonlyasthequalityofthejobandpoweravailablewillallow.
–Iftheslipclutchslips,reducethegroundspeedorraisethemachineslightlyoutoftheground.
PREOPERATIONAL ADJUSTMENTS
Settractor’sliftcontrolstopatapositionthatwillpreventthePTOshaftfromcomingincontactwiththefrontedgeoftheRotaryHoewhenitisatfulllift.Consultyourtractormanualforinstructions.
STORAGE SAFETY
Followinguse,orwhenunhookingtheRotaryHoe,disengagethePTO,stopthetractor,settheparkbrakes,shutofftheengineandremovetheignitionkeys.
Storetheunitinanareaawayfromhumanactivity.
Do not park equipmentwhere it can be exposed to direct contactwith livestock for long periods of time.DamagetoRotaryHoeandorlivestockcouldresult.Makesureallparkedmachinesareonahard,levelsurfaceandthatallsafetydevicesareengaged.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
/ 17
IV. OPERATION & TRAVEL
1. Before using, ensure you are fully compliant with the safe operation of the machine and you have read and understood the manual.
2. After 10 hours of operation, ensure all nuts and bolts are re-checked for tightness. Check oil levels and any signs of oil loss.
3. Before operation, the tractor must have the right speed output of 540rpm to avoid damaging the machine.
4. The operating speed is 1.2-1.5 km/h. Any deviation will cause irrepairable damage and void your warranty.
V. CUTTING TOOL REPLACING
1. Before changing the cutting blades, stop the engine of the tractor, and after all moving parts have stopped, disconnect the PTO shaft.
2. Check the condition of each blade by carefully rotating the shaft. screw down all the bolts(1), replace used or damaged cutting tools and bolts making sure of the correct orientation of the blades, install left and right(4) blades carefully, tighten bolts(1) with shim(2)(If required) and nut (3), and tighten
bolt(1).
3. For best performance of the implement, use the original cutting tools only.
5
MAINTENANCE SAFETY
Goodmaintenanceisyourresponsibility.•Followgoodshoppractices•Keepserviceareacleananddry.•Besureelectricaloutletsandtoolsareproperlygrounded.
•Useadequatelightforthejobathand.
Makesurethereisampleventilation.Neveroperatetractorengineinaclosedbuilding.Theexhaustfumesmaycauseasphyxiation.
Beforeworkingonthismachine,disengagethePTO,becertainallmovingpartsonattachmentshavecome toacompletestop,shutoffengine,set theparkbrakesandremove the ignitionkeysbeforeattempting toperformmaintenance.
DonotperformmaintenanceorworkontheRotaryHoeonunevenorslopingsurfaces.
NeverworkunderequipmentunlessRotaryHoeisproperlysupportedbyblocksorstandsunderthebodywithappropriateapprovedweightcapacity.
Alwaysusepersonalprotectiondevicessuchaseye,handandhearingprotectorswhenperforminganyserviceormaintenance.
Frequentlytightenallbolts,nuts,screwsandchecktomakecertainunitissafetooperate.
Whencompletingmaintenanceorservice,makesureallsafetyguardsanddevicesareinstalledbeforeusingthe rotary hoe.
Afterservicing,besurealltools,partsandserviceequipmentareremovedfromtheRotaryHoe.
Donotallowdebris,greaseoroiltobuilduponanypartofthemachine.
Where replacement parts are necessary for periodicmaintenance and servicing, factory replacement partsmustbeusedtorestoreyourequipmenttooriginalspecifications.ContactyourlocaldealerorSouthernCrossAgMachineryregardingsupplyorreplacementparts.
Themanufacturerand /ordistributorwillnotberesponsible for injuriesordamagescausedby theuseofunapprovedpartsandoraccessories.
Afirstaidkitshouldbekeptreadilyaccessiblewhileperformingmaintenanceonthisequipment.
CUTTING TOOL REPLACEMENT1.Beforechangingthecuttingblades,stoptheengineofthetractorandafterallmovingpartshavestopped,disconnectthePTOshaft.
2.Checktheconditionofeachbladebycarefullyrotatingtheshaft.Screwdownallthebolts(1-referimagebelow),replaceusedordamagedcuttingtoolsandboltsmakingsureofthecorrectorientationoftheblades,installleftandright(4)bladescarefully,tightenbolts(1)withshim(2)ifrequiredandnut(3)andtightenbolt(1).
3.Forbestperformanceoftheimplement,usetheoriginal cuttingtoolsonly.
SLIP CLUTCH MAINTENANCE Toadjustslipclutchcompressspringsfullythenbackofftwoturns. Finetunesothattheclutchslipsoccasionally.Retentionslipclutch clampboltsaftertenhoursofuse,thenevery100hoursofuse.
6
Safety - 65 Series Rotary Tiller
Safety
Safety InstructionsRemember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
The alert symbol is used throughout this manual. It indicates attention is required and identifies hazards. Follow the recommended precautions.
The safety alert symbol means… ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
CAUTIONThe caution symbol indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
WARNINGThe Warning Symbol indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.
DANGER
The Danger Symbol indicates an imminently hazardous situation that, if not avoided will result in death or serious injury. This signal word is to be limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.
1
23
4
/18
SAFETY DECAL LOCATIONS
Thesafetydecalsandtheirpositionsareshownonthepicturebellow.Goodsafetyrequiresthatyoufamiliarizeyourselfwiththevarioussafetydecals,thetypeofwarningandtheareaorspecificfunctionrelatedtothatareathatrequiresyourSAFETYAWARENESS.
REMEMBER: Ifthesafetydecalshavebeenremovedordamagednewsafetydecalsmust be applied. Please contact Southern Cross AgMachinery oryourlocaldealerifyourequirenewdecals.
/ 19
ROTARY HOE SAFETY DECALS 2
4
1
3
5
61416
1 2
4
3
5
/18
SLASHER SAFETY DECALS
2
4
1
3
5
61416
1 2
3 4
5
6
/18
SLASHER SAFETY DECALS
2
4
1
3
5
61416
1 2
3 4
5
6
6 7
/ 20
MAINTENANCE SCHEDULE
SouthernCrossMowersrecommendsthatthefollowingroutineservice/maintenanceschedulebefollowedtoensuretheefficientandsafeoperationofyourRotaryHoe.IffollowedthismaintenanceschedulewillmaximisetheworkinglifeoftheRotaryHoe.
PRIOR TO FIRST USE OF ROTARY HOE1.Checkallboltsandnutsaretightenedcorrectly
2.Checkallhitchpinsaresecurelylocked
3.EnsureQuickCouplerPinsonthePTOshaftaresecuredcorrectlytoboththe SlipClutch(RotaryHoeend)andtothetractorPTOoutputshaft
4.Ensureslipclutchissetcorrectly
5.Checkgearboxandchaindrivehousingoillevel.Addoilifrequired
6.CheckPTOshafthasbeengreasedasperinstructionslistedonbottomofthispage.
AFTER THE FIRST HOUR OF OPERATION1.Checkallboltsandnutsaretightenedcorrectly
2.Checkgearboxandchaindrivehousingoillevel.Addoilifrequired.
3.Checkthatthebladesareingoodconditionandboltedsecurelytotherotor.
4.CheckthatthePTOdrivelineshieldspinsfreely.
5.Lubricateallthegreasepoints.
AFTER EVERY EIGHT HOURS OF OPERATION1.GreasePTOshaftasperinstructionslistedonbottomofthispage.
2.Checkbladesforsignsofdamageorexcessivewear.Replaceifnecessary
3.Ensurebladeretainingboltsandselflockingnutsarenotdamagedandaretight
4.CheckClutchsettingsandmakeadjustmentsifnecessary
5.Checkforanydebrisfromcuttingoritemssuchaswirearenotbuiltuparoundbladesand maindrivedrum.
6.CleanRotaryHoeandremoveanydebristhathasbuiltupontheRotaryHoe.
AFTER EVERY 40 HOURS OF OPERATION1.Completeallprocessesaspereighthourservice
2.Checkallboltsandnutsaretightenedcorrectly
3.Checkallhitchpinsaresecurelylocked
4.CheckPTOshaftuniversaljointsforanysignsofwear.Replaceanyworncomponentsifrequired.
ANNUALLY1.Replacegearboxandchaindrivehousingoil.
PTO SHAFT MAINTENANCEPTOshaftuniversal jointsand telescopicsectionsshouldbegreasedwithagoodqualityhigh temperaturegreasesimilarto(MP)MultipurposeChassisGreaseevery20hoursforaverageconditions.Insevereoperatingconditionsgreaseshouldbeaddedeveryeighthours.
Safetyguardbearingsshouldbelubricatedbyapplyinggeneralpurposegreasetotheplasticgreasenipplesonthebellguardsevery20hours.
REPLACING BLADESItisrecommendedthatwheneverbladesrequirereplacingonaSouthernCrossAgMachineryRotaryHoethefollowingcomponentsalsobereplaced.Bladeretainerboltsandnylocknuts.Boltsmustbetightenedto350ft./lb.ThesearelistedinthePartsListonpage24ofthisManual.Ensurethatbladesareinstalledinthecorrectorientation.SpecificationsarealsodetailedandmustbereplacedusinggenuineSouthernCrossAgMachineryparts.PleasecontactyourlocaldealerorSouthernCrossAgMachineryforanypartsrequired.
/ 21
TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY
Gearboxoverheating 1.Lowonlubricant Filltoproperlevel
2.Impropertypeoflubricant Replacewithproperlubricant
3.Excessivedebrisbuild-up Removedebrisaroundgearbox
RotaryHoewillnotcutallthetime Slipclutchisslipping Adjustslipclutchaccordingtoinstructions
RotaryHoemovesfromsidetosidewhencutting
Loosetractorswaychains,barsorswayblocksimproperlyinstalled
Adjustswaychains,barsorswayblocks
PTOcontactsRotaryHoefrontframewhenraised
RaisingRotaryHoetoohighorincorrectadjustmentoftractor toplink
Adjusttoplinkortractorliftstops
Bladeboltscomeloose 1.Boltsnottightened Tightenboltsto350ft./lb
2.Bladeboltthreadsarewornordamaged.
Replacebladebolt,washer, nylocknut
Bladewearstoofast 1.Cuttinginsandyconditions Increasecuttingheight
2.Cuttinginrockyconditions Increasecuttingheight
RotaryHoeseemstorequireexcessivepower
1.Advancingintograssorbushtoorapidly
Reduceforwardtravelspeed
2.Wornordullblades Replaceblades
3.Tractornotlargeenough UsehigherHPtractor(45HPmax)
Excessivevibration 1.Checkgearboxbolts Tightenifloose
2.Checkforloosenutson allcomponents
Tightenifloose
3.Checktoseeifbladesaretight Boltsandtightenretainernylocknutsto350ft./LB
4.Bladebroken Replacebladesinsets
5.Newbladeorboltsmatchedwithwornbladeorbolts.
Replacebladesandboltsinsets
6.Wireorropewrappedaroundbladedrum.
Removewireorrope
7.Bladeswornandareout ofbalance.
Replacebladesinsets
Gearboxnoisy 1.Roughgears Runinorchangegears
2.Wornbearings Replacebearing
3.Lowoilingearbox Checklevelandaddoil.
Gearboxleaking 1.Damagedoilseal Replaceseal
2.Bentshaft Replaceoilsealandshaft
3.Shaftroughonoilsealarea Replaceorrepairshaft
4.Oilsealinstalledincorrectly Replacesealandinstallcorrectly
5.Oilsealnotsealingin thehousing
Replacesealoruseasealantonoutsidediameterofseal
6.Oilleveltoohigh Drainoiltoproperlevel
7.Holeingearbox Replacegearbox
8.Gasketdamaged Replacegasket
9.Boltsloose Tightenbolts
/ 22
FOR FURTHER INFORMATION
WorkCover NSWVisitwww.workcover.nsw.gov.auCalltheWorkCoverAssistanceServiceon 13 10 50CalltheWorkCoverPublicationsHotlineon1300 799 003VisityournearestWorkCoveroffice. FortechnicalspecificationsonRotaryHoes,contactyourlocalmanufacturer.
SafeWork South AustraliaGPOBox465 AdelaideSA5001 HelpCentre:1300 365 255 Website:www.safework.sa.gov.au
Workplace Health and Safety queensland, Department of Justice and Attorney-GeneralGPOBox69 BrisbaneQLD4001 Workplacehealthandsafetyinfoline:1300 369 915 ElectricalSafetyinfoline:1300 650 622 Website:www.worksafe.qld.gov.au
WorkSafe VictoriaAdvisoryService222 ExhibitionStreet MelbourneVIC3000 Telephone:03 9641 1444Tollfree:1800 136 089Email:[email protected] Website:www.worksafe.vic.gov.au
WorkSafe Western Australia1260 hay Street WestPerthWA6005 Telephone:08 9327 8777 TollFree:1300 307 877Email:[email protected] Website:www.worksafe.wa.gov.au
/ 23
ROTARY HOE PARTS DIAGRAM
7
71
70
69
/ 24
ROTARY HOE PARTS LIST
PARTS NUMBER DESCRIPTION qUANTITY
1 Left-bentblade 16
2 Right-bentblade 16
3 Bladeshaft 1
4 Bolts 8
5 StopWasher 8
6 Washer 8
7 Cap 1
8 Oilsealring 2
9 Oilseal 1
10 Bearing 1
11 Cover 1
12 Eyeletwasher 1
13 Shaftwasher 1
14 Bearing 2
15 Bearingseat 1
16 Sideboard 1
17 Dowel 1
18 Shieldprotectivecover 1
19 Dower 1
20 Staybar 1
21 Dower 3
22 Sheath 2
23 Dower 2
24 Cover 1
25 Side Board 1
26 Bearingseat 1
27 Tensionplate 1
28 Spring 1
29 Anti-frictionplate 2
30 Eyeletwasher 1
31 Bearing 1
32 Bigsprocketwheel 1
33 Washer 1
34 Stopwasher 1
35 Circularnut 1
36 Oilsealring 1
37 Sidechaingearbox 1
/ 25
ROTARY HOE PARTS LIST continued
PARTS NUMBER DESCRIPTION qUANTITY
38 Chain 1
39 Circularnut 1
40 Stopwasher 1
41 Washer 1
42 Smallsprocketwheel 1
43 Bearing 1
44 Secondshaft 1
45 Angleiron 2
46 U-Bolts 2
47 Mainframepipe 1
48 Oilseal 1
49 Bearing 1
50 Bigbevelgear 1
51 Washer 1
52 Stopwasher 1
53 Circularnut 1
54 Mainframepipe 1
55 Firstshaft 1
56 Smallbevelgear 1
57 Bearingoilsealing 1
58 Oilsealring 1
59 Cap 1
60 Immediategearbox 1
61 Oilsealring 1
62 Cap 1
63 Oilsealring 1
64 Washer 12
65 Stopwasher 12
66 Bolts 2
67 Oilplug 2
68 Oilsealring 2
69 Slipclutchsafetyguard 1
70 Slipclutch 2
71Bladeretainerbolts&nylocks8.8grade RTM120x48
Bladeretainerbolts&nylocks8.8grade RTM150x64
/ 26
WARRANTY
SouthernCrossAgMachinerywarrantsalltheirproductsagainstdefectiveworkmanshipand,ormaterialsforaperiodoftwelve(12)monthsfromthedateofpurchase.Athree-yearextendedwarrantyprogramappliestogearboxessuppliedwiththefollowingproducts;RotaryHoes,finishingmowersandpost-holediggerssoldfromJune25th2009.ForattachmentsusedincommercialenterprisestheWarrantyperiodissix(6)monthsonallcomponentswiththeexceptionofcomponentsthatarenotincludedasperthedetailedlistedinthenextparagraph.ProofofpurchaseplusproofofthedefectwillberequiredandmustbereceivedbySouthernCrossAgMachinerywithinsevendaysofproductfailureandpriortotheendofthetwelve(12)monthperiodfromdateofpurchase.AWarranty Claim Form MUSTbelodgedthroughtheDealerwheretheitemwaspurchased.A Warranty Claim Number willbe issued.WorkcommencedwithoutaClaimNumber issuedandthereforewarrantyapprovalwillnotbecoveredbySouthernCrossAgMachinery.
SouthernCrossAgMachinery takes no responsibility for the repair of any products rendered defective ordamagedthroughnormalwearandtearorincorrectuseoftheproduct.SouthernCrossAgMachinerydoesnotprovidewarrantyonanycuttingblades,tilling/hoeblades,rippers,scarifiers,tynes,tyres,clutchplates,frictionplates,V-beltsandPostHoleDiggercuttingbits.SouthernCrossAgMachinerydoesnotprovidewarrantyonanyproductsthathaveundergonemodification.SouthernCrossAgMachineryreservestherighttodeterminewhethertheproductisdefective.SouthernCrossAgMachinerydoesnotacceptresponsibilityforanyproductwhichisdamagedintransit.FaultypartsmayneedtobereturnedtoSouthernCrossAgMachineryaspartoftheWarrantyprocess.Freightcostseachwaywillbepaidbytheowner/purchaseroftheproduct.
Purchasers,dealersoragentsoftheSouthernCrossAgMachineryproductarenotauthorisedtogivewarrantyonbehalf ofSouthernCrossAgMachinery.Claimswill onlybe recognised, if lodgedasoutlinedonpage29 in the Warranty Process.AnyworkcommencedwithoutSouthernCrossAgMachineryapprovalwillnotbehonoured.
Productspecificationsaresubject tochangedue toourcompany’spolicyof improvement.DesignchangesandimprovementsmaybemadebySouthernCrossAgMachinerywheneveritbelievestheeffectivenessofitsproductscanbeimproved.SouthernCrossAgMachineryhasnoobligationtoincorporateanyimprovementstoproducts,whicharecurrentlyinserviceorhavebeensupplied.
REGISTER YOUR WARRANTY
ToregisteryourWarrantypleaseensurethedealer fromwheretheproducthasbeenpurchasedcompletesthe Southern Cross Ag Machinery Installation / Warranty RegistrationForm.Thistripletdocumentneedstobesignedbythepurchaser.OnecopyremainswiththeDealer,onecopyneedstobemailedtoSouthernCrossAgMachinery(Rear18ParramattaRoad,HomebushNSW2140)andonecopywillremainwiththepurchaserforyour reference.
IfyouhaveanyqueriesregardingthewarrantyofyourSouthernCrossAgMachineryproductpleasecallourofficeTel.(02)[email protected].
/ 27
WARRANTY PROCESS
1.ContactyourdealerorpointofpurchasewhowillcontactSouthernCrossAgMachinery.
2.Photosandorvideofootagemayberequiredtoprocessyourclaimwithashortdescriptionoftheproblem.ThiswillbelodgedthroughyourdealerorpointofpurchasebythecompletionoftheSouthernCrossAgMachinery Warranty Claim Form.
3.TheclaimwillbeassessedbySouthernCrossAgMachinerytodeterminewhetherthewarrantyclaimwillbeapproved.ThiscantakeuptofiveworkingdaysfromwhenSouthernCrossAgMachineryisfirstnotifiedoftheproblemandproofofproductfailurealongwithWarranty Claim Formissupplied.
4. If the Warranty ClaimisapprovedaWarranty Claim NumberwillbeissuedtotheDealer.
5.AnyworkcommencedwithoutapprovalfromSouthernCrossAgMachineryandwithoutaWarranty Claim NumberwillnotbecoveredbyWarranty.RepairsmustbemadebySouthernCrossAgMachineryoranauthoriseddealer.SouthernCrossAgMachineryreservestheexclusiverighttodeterminewhetheritwillpaylabourcostsforwarrantyrepairsorreplacementsandtheamountofsuchcoststhatitwillpayandthetimeinwhichtherepairswillbemade.SouthernCrossAgMachinerywillnotapproveinvoicessentforrepairsthatSouthernCrossAgMachineryhasnotpreviouslyapproved.
6.TravelandfreightchargesassociatedwiththeprocessingoftheWarrantyClaimwillnotbecoveredbytheSouthernCrossAgMachineryWarrantyandistheresponsibilityoftheowner/purchaser.
DISCLAIMER
Whilstinformationistrueattimeofprintingactualproductmaydifferslightlyfromtheproductdescribedhereinduetoourcompany’spolicyofimprovement.Errorsandomissionsmayhappenfromtimetotime,weapologiseforanyinconvenienceshouldthisoccur.Productsmaydifferslightlyinappearancetoillustrations/photographsprovided.
SOUTHERN CROSS AG MACHINERYREAR18PARRAMATTAROAD,HOMEBUSHNSW
t. 02 9746 9060 WWW.SXM.CoM.Au
AUTHORISED SXM DEALER