Climate Change by Teoh Boon Tat Warabhorn Preechaporn Leong Chee Kin.
Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab...
-
Upload
bennett-terence-stone -
Category
Documents
-
view
215 -
download
0
Transcript of Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab...
![Page 1: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/1.jpg)
Operational Considerations in Simulation and
Deployment of RFID Systems
Kin Seong Leong
Auto-ID Lab @ Adelaide
School of Electrical & Electronic Engineering
University of Adelaide
Australia
![Page 2: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/2.jpg)
Outline
• Introduction on RFID
• RFID EMC
• Sources of Error in RFID Simulation
• Others
• Conclusion
![Page 3: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/3.jpg)
Introduction on RFID
• What is RFID?• RFID basic components:
HO STCO M PUTER
RFID REA DER RA DIO W AV ES RFID TAG SO N O BJE CTS
RE ADERAN TEN NA
![Page 4: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/4.jpg)
Problems in RFID
• Regulations– Limited BW– Strict radiated power level
• Large Scale Deployment– Collision problem– Interrogation zone
![Page 5: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/5.jpg)
RFID EMC
Frequency Hopping Spread Spectrum (FHSS)
RFID EMC
Listen Before Talk (LBT)
![Page 6: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/6.jpg)
FHSS
• Example: USA FCC Title 47 Part 15.277
• 902-928MHz • maximum total radiated power of 4
W EIRP• 50 channels of 500 kHz
![Page 7: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/7.jpg)
Listen Before Talk (1)
• Example: European ETSI 302 208• 865-868 MHz• 2 W ERP (approximately 3.2 W EIRP)• 15 sub-bands, 200 kHz wide• Only 10 sub-bands at 2W ERP
![Page 8: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/8.jpg)
Listen Before Talk (2)
• Threshold Value for “Listen Before Talk”:
![Page 9: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/9.jpg)
Current Situation
![Page 10: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/10.jpg)
Sources of Simulation ErrorSources of Simulation Error
Simulation Model
Reflection, Refraction, and Diffraction
Radiation Pattern of Antenna
Simulation Result Interpretation and Analysis
![Page 11: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/11.jpg)
Simulation Model (1)
• A simple path loss model:
(1)
• n is the environment factor.
![Page 12: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/12.jpg)
Simulation Model (2)
• Modification to (1):
(2)
• n increases as distance increases.
![Page 13: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/13.jpg)
Simulation Model (3)• Comparison of results:
• (2) is accurate to a certain extend but cannot take in consideration of obstacles.
![Page 14: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/14.jpg)
Simulation Model (4)
![Page 15: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/15.jpg)
Simulation Model (5)
![Page 16: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/16.jpg)
Reflection, Refraction and Diffraction
• Suggested a hybrid path loss model – Using (2) together with ray tracing.– Not more than 5 rays.– Taking in consideration of obstacles
encountered along path of rays.– Reduced error between computation and
experimental results.– Infancy stage.
![Page 17: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/17.jpg)
Radiation Pattern of Antenna
• Measured in anechoic chamber.
• Assumption:– Antennas of same model
have same radiation pattern.– Radiation pattern may
change due to surroundings.
![Page 18: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/18.jpg)
Simulation Result Interpretation and Analysis
• Consider: The LBT threshold limit for 2 W ERP with threshold value -126 dBW. If a signal with higher power is detected in a band of interest, this band of interest cannot be used for tag interrogation.
• A sharp boundary in simulated results to represent the LBT threshold limit may not be appropriate. A boundary zone of 3dB (depending on the environment) is more suitable for interpreting simulated results.
![Page 19: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/19.jpg)
Simulation Result Interpretation and Analysis
• Boundary zone would be more appropriate than boundary line:
![Page 20: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/20.jpg)
Sources of Simulation ErrorSources of Simulation Error
Simulation Model
Reflection, Refraction, and Diffraction
Radiation Pattern of Antenna
Simulation Result Interpretation and Analysis
![Page 21: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/21.jpg)
Others
Simulation of frequency channelling.
![Page 22: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/22.jpg)
Frequency Channelling
• Transmit Mask for Dense-Interrogator Environments:(extracted from EPCglobal C1G2)
![Page 23: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/23.jpg)
Multi Channel Simulation
• Antennas operating certain channels away from channel of interest.
![Page 24: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/24.jpg)
Conclusion
• Identified common errors of RFID simulation and suggested ways of minimising some of these errors.
• Some errors are unavoidable, but the extent estimated from empirical measurements can be shown to be not severe.
![Page 25: Operational Considerations in Simulation and Deployment of RFID Systems Kin Seong Leong Auto-ID Lab @ Adelaide School of Electrical & Electronic Engineering.](https://reader035.fdocuments.us/reader035/viewer/2022062519/5697bfa41a28abf838c972de/html5/thumbnails/25.jpg)
Future Work
– A systematic way in determining n.
– A user friendly simulator.
Question?