Operation - · PDF fileOMN-SU:HLRi:MML Operation Subscriber 1 Introduction (IN) ... •...

Operation

Subscriber

OMN-SU:HLRi:MML

A50016-D1721-Q503-1-7619

2 A50016-D1721-Q503-1-7619

OMN-SU:HLRi:MML OperationSubscriber

f Important Notice on Product SafetyElevated voltages are inevitably present at specific points in this electrical equipment. Some of theparts may also have elevated operating temperatures.

Non-observance of these conditions and the safety instructions can result in personal injury or in prop-erty damage.

Therefore, only trained and qualified personnel may install and maintain the system.

The system complies with the standard EN 60950 / IEC 60950. All equipment connected has to complywith the applicable safety standards.

The same text in German:

Wichtiger Hinweis zur Produktsicherheit

In elektrischen Anlagen stehen zwangsläufig bestimmte Teile der Geräte unter Spannung. Einige Teilekönnen auch eine hohe Betriebstemperatur aufweisen.

Eine Nichtbeachtung dieser Situation und der Warnungshinweise kann zu Körperverletzungen undSachschäden führen.

Deshalb wird vorausgesetzt, dass nur geschultes und qualifiziertes Personal die Anlagen installiert undwartet.

Das System entspricht den Anforderungen der EN 60950 / IEC 60950. Angeschlossene Gerätemüssen die zutreffenden Sicherheitsbestimmungen erfüllen.

Trademarks:

All designations used in this document can be trademarks, the use of which by third parties for theirown purposes could violate the rights of their owners.

Copyright (C) Siemens AG 2002.

Issued by Information and Communication MobileHofmannstraße 51D-81359 München

Technical modifications possible.Technical specifications and features are binding only insofar asthey are specifically and expressly agreed upon in a written contract.

A50016-D1721-Q503-1-7619 3

OperationSubscriber

OMN-SU:HLRi:MML

Reason for UpdateSummary:New

Issue HistoryIssue

Number

Date of issue Reason for Update

1 10/2002 New

4 A50016-D1721-Q503-1-7619


A50016-D1721-Q503-1-7619 5

OperationSubscriber

OMN-SU:HLRi:MML

This document consists of a total of 79 pages. All pages are issue 1.

Contents

1 Introduction (IN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.1 Generation of MML Batch Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.1.1 Control Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.1.2 Data Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.2 Execution of MML Batch Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101.3 Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111.3.1 Examples of batch orders (control information) . . . . . . . . . . . . . . . . . . . . . 111.3.2 Example of MML batch file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141.3.3 Example of using subscriber templates . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2 Task List (TL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162.1 Administration in the Authentication Center (AC) . . . . . . . . . . . . . . . . . . . . 162.2 Administration in the Home Location Register (HLR) . . . . . . . . . . . . . . . . . 162.2.1 Administration of General HLR Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162.2.1.1 General HLR Data except IN Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162.2.1.2 CAMEL Services for Mobile Subscribers (Part of General HLR Data) . . . . 172.2.2 Mobile Subscriber Administration in the HLR . . . . . . . . . . . . . . . . . . . . . . . 182.2.2.1 Circuit-Switched Domain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182.2.2.2 Packet-Switched Domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222.3 Administration of the VLR and the SGSN via the HLR . . . . . . . . . . . . . . . . 24

3 Task Summary Lists (TS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6 A50016-D1721-Q503-1-7619


1 Introduction (IN)The HLR Innovation can be administrated with MML (man machine language) com-mands by the execution of batch orders. MML batch files collect a set of single and massMML administration requests for job execution at the HLR/AC.

Benefits of the MML interface:• Already existing MML command files for HLR Classic can be re-used (downward

compatible MML support).• Recurrent or scheduled execution of tasks is possible (alike for XML batch files).

Because the MML commands are internally converted to XML format and the XML re-sponse is internally converted back to MML, the validating and execution of MML batchfiles takes however additional ressources compared to XML batch files.

This document deals with the creation and design of MML batch files. General batchhandling principles are described in the system administration manual ”OMN-SY:HLRi”;XML batch file creation is illustrated in the XML manual “OMN-SU:HLRi:XML”.

The MML batch orders are generated externally and are transferred into the system viaFTP/FTAM interface provided by the platform. Further processing is done by the batch-processing component of the platform.

1.1 Generation of MML Batch FilesMML batch files can be generated or modified with any text editor.

One MML batch file for the HLR Innovation always consists of two sections:• Control Information (batchscript)• Data Information (CMDFILE)

Both the control and data parts are specified in the same file. It is recommended thatcontrol information is placed before data information.

If the control information is missing, a default control file is generated (see 1.3.1, Exam-ple 4). The default control file will execute the batch order immediately. To avoid unin-tentional execution it is recommended for all MML batch files to add control informationwith ’check only’ attribute as a standard.

A50016-D1721-Q503-1-7619 7

OperationSubscriber

OMN-SU:HLRi:MML

1.1.1 Control InformationThe control information contains the following characteristics about the correspondingbatch order:• The name of the output batch file to which the results of the batch execution has

to be written.• Scheduling information in case of scheduled jobs, which includes:

– activation time,– expiration time and– periodicity (e.g. in minutes, seconds)

• The execution modes are:– Check only (immediately) - validates for syntactical correctness of the batch data– Check (immediately) and execute (later) if no error occurs - validates for syntacti-

cal correctness of the batch data and then executes the requests only if validationwas error free.

– Execute only (immediately or later) - directly executes the requests in the batchdata. In case of default control information generated for an MML batch order it isalways set to this mode.

• The name of the input batch file . (The name format can be found in the Notes be-low.)

• The type of batch order (MML or XML). For MML batch files always choose thetype “MML”.

The control information is defined based on the @vantage platform batch processingDTD.

Notes• MML orders contain both the control information and the data information. It is rec-

ommended to place the control information at the beginning of the file before the da-ta.

• The attribute <param name="MML" value="true"/> is mandatory.• The input data file name provided in the control information should always be the

<input mml file name>.dat., compare:

• Failures when specifying the above information will cause the order to be aborted.• The results will always be available in the file name <output data file name>.leg.• If the control information was not specified then the result file name is <input mml

file name>.res.leg.

Please refer also to the examples for control information in Section 1.3.1.

<inputdata>

<data>

<file url="[Input Mml file name].dat"></file>

</data>

</inputdata>

8 A50016-D1721-Q503-1-7619


1.1.2 Data InformationWithin MML batch file the control information is followed by the data information.

Structure

The data information section is structured as follows:

CMDFILE: This command marks the beginning of the data information section and is al-lowed only at this position.

ENDFILE: This command marks the logical end of the data information section.

Command lines may contain MML commands and flow control commands (MML COFIPcommands). The beginning of an MML command (or COFIP command) is indicated withthe special character "<".

Input modes

a) Direct mode:This dialog type consists of a sequence of complete commands terminated with “;”

b) Continuation mode:This dialog type is used to administer several parameter values within only one com-mand. The start of the continuation mode is marked with a terminating "!". The con-tinuation lines, which consist of parameter blocks only, are marked with a leading ":".The continuation mode is ended if a parameter block is terminated with ";".

Jump instructions

Forward skips in the command file processing can be realized with:• Control switches: Command sequences can be skipped (SKIP CMD) dependent on

the prior setting of the control switches. You can set switches 1 to 16 to on/off withSET CFOPT.

• STEPs: If an error occurs during command file execution, processing of the com-mand file is resumed at the command following the next STEP command.

Characters

Special characters are used in the command file:

<CMDFILE;:Command lines:<ENDFILE;

1..16 user switches

17..32 system switches (17: not used, 32: error switch)

< indicates the beginning of a command in MML syntax; starts the direct mode or returns to the direct mode (as terminating character). indicates a label followed by a command to which can be branched to! starts the continuation mode (as terminating character): indicates the command continuation mode/ indicates the beginning of a non-printable comment line

A50016-D1721-Q503-1-7619 9

OperationSubscriber

OMN-SU:HLRi:MML

If the commands have to be compatible with HLR Classic, you must enter them in uppercase format. The case sensitivity parameter in the configuration, project and office datadefines, whether the execution of the batch order strictly follows the MML format (forbackward compatibility where data in hand is in upper case) or whether lower case char-acters are allowed for compatibility with data entered via XML interfaces.

The following example shows the combination of continuation mode with continuationcommands:

COFIP commands

The following COFIP commands are supported within MML batch files:• CMDFILE• SET CFOPT

restricted to SET CFOPT: <ACKCFS =ALL , ON = , OFF = > [,SCOPE =LOCAL ];• RESET CFOPT• SKIP CMD• STEP• ENDFILE

Within a command file it is not possible to trigger the processing of further commandfiles, that is nested command files are not supported.

The attribute “dangerous command” is not supported.

COFIP commands found within an MML batch file are not interpreted by the system’sMML converter, but are handled by the batch processing component.

MML commands

Detailed description of MML commands itself can be found in the “Task Manual (TML)”,which should be used together with the introduction into subscriber management “OMN-SU:HLRi:Intro”. A collection of typical tasks can be found in Section “2”.

The batch file may contain single requests (each MML command concerns a single sub-scriber) or mass data requests (one MML command concerns many subscribers) in anycombination. If you want to initiate a mass request, use multiple values or ranges asspecified in the TML or use the “X” character, which affects all subscribers in a massrequest.

// indicates the beginning of a printable comment line# indicates the beginning of the continuation line

<CR MSUB:MSIN=4400100607,

#BSNBC=TELEPHON-4400607!

:MSIN=4400100608, BSNBC=TELEPHON-4400607;

10 A50016-D1721-Q503-1-7619


1.2 Execution of MML Batch FilesThe MML batch file has to be transferred to the HLR/AC via FTP/FTAM. The batch ordermanagement recognizes new batch input orders while scanning dedicated directories ofthe file system and executes them automatically.

A pre-processing step transforms the input syntax into XML syntax and separates thedata information from the control information.

The converter performs the following steps:• Forward conversion (MML to XML) is put into a new output stream opened by the

converter on a temporary file, which will form the XML data file. In case of errors, thebatch order is stopped and the errors are logged into the batch result file.

• Put the control information (in XML) into another output stream.

The syntax check or the validation of control and input data files will be started immedi-ately after transferring them to the HLR system. If errors occur they can be seen on thebatch management GUI and the operator can correct them.

The validation function checks the batch input and reports syntax errors in a log file with-out executing the input commands. This is done in the following scenarios:– automated validation of a scheduled batch order after transfer to HLR server– manual validation step before execution on behalf of operator.

Execution is started automatically according to the parameters specified in the controlinformation section of the batch file (see Section 1.1.1). A scheduled execution of theorder is only possible after a successful validation of the syntax.

The following execution modes are possible:• check only (immediately)• check (immediately) and execute (later) if no error• execute immediately or later (without checking)

Once the order has been processed, the converter is invoked again for reverse conver-sion of the result information (from XML representation to MML representation).

The MML output file can be retrieved from the directory <BatchProcessing>/<user>/out-put on the FTP/FTAM server.

iOnly users with “HLRi.Access.Batch” function rights are allowed to execute batch or-ders. Depending on the MML task further function rights are required to execute the taskat the network element. Please refer to “OMN-SY:HLRi” for detailed information on func-tion access rights.

A50016-D1721-Q503-1-7619 11

OperationSubscriber

OMN-SU:HLRi:MML

1.3 Examples

1.3.1 Examples of batch orders (control information)Examples for MML batch order with the input data file name being “MmlBatch.mml”. Thecontrol information shown is case sensitive.

1. Check mode: The complete XML order is syntactically checked.

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE batchscript SYSTEM "batch.dtd">

<batchscript version="3.2" name="MmlBatch.mml" checkMode="checkOnly">

<command>

<operation name="hlri/batch/bhp.importData">

<param name="MML" value="true"/>

</operation>

<inputdata>

<data>

<file url="MmlBatch.mml.dat"></file>

</data>

</inputdata>

<outputdata>

<file url ="MmlBatch.res"></file>

</outputdata>

</command>

</batchscript>

12 A50016-D1721-Q503-1-7619


2. Execute mode: The MML order is executed. The user can specify the total and con-secutive number of errors as part of the control information. In case of multiple com-mands in the control file, the “bAbortOnError” flag in the control file can be set todiscontinue order execution in cases of errors encountered in the first command.



<batchscript version="3.2" name="MmlBatch.mml" bAbortOnError="true" checkMode="execOnly">

<command>



</operation>

<inputdata>

<data>


</data>

</inputdata>

<outputdata>


</outputdata>

</command>

</batchscript>

A50016-D1721-Q503-1-7619 13

OperationSubscriber

OMN-SU:HLRi:MML

3. Check and execute mode: The order will be executed only if there are no syntaxerrors.

4. Default control information generated in case no control information is provid-ed:



<batchscript version="3.2" name="MmlBatch.mml" checkMode="checkAn-dExec">

<command>



</operation>

<inputdata>

<data>


</data>

</inputdata>

<outputdata>


</outputdata>

</command>

</batchscript>



<batchscript version="3.2" name="MmlBatch.mml" checkMode="execOnly">

<command>



</operation>

<inputdata>

<data>


</data>

</inputdata>

<outputdata>


</outputdata>

</command>

</batchscript>

14 A50016-D1721-Q503-1-7619


1.3.2 Example of MML batch fileThis is an example of a complete MML batch file, which consists of control informationand data information.

<?xml version=1.0” encoding=”UTF-8”?><!DOCTYPE batchscript SYSTEM “batch.dtd”><batchscript name=”Mml_batch_file”

checkMode=”execOnly”><command>

<operation name=”hlri/bhp”><param name=”MML” value=”true”/>

</operation><input data>

<data><file url=”Mml_batch_file.dat”></file>

</data></inputdata><outputdata>

<file url=”Mml_batch_file.res”></outputdata>

</command></batchscript>

<CMDFILE;//Modifies all subscribers<MODMSUB:MSIN=X,BSNBC=TELEPHON-XXX-XXX-XXX&TELEPHON-XXX-XXX-XXX,CBSNBC=TELEPHON-XXX-XXX-XXX&TELEPHON-XXX-XXX-XXX,MSCAT=DATACALL,SUBRES=ALLPLMN-XXX,PIC=XXX,BAOC=NONE,BA-IC=NONE, BAROAM=NONE,BAPRC=NONE,BASPH=OSBT1, CBASPH=OSBT1,BASSM=NONE,EXPIRY=XXX,TOSM=SGSN,BAGPRS=NONE,CHRG=NORMAL,CCHRG=NORMAL;<ENDFILE;

A50016-D1721-Q503-1-7619 15

OperationSubscriber

OMN-SU:HLRi:MML

1.3.3 Example of using subscriber templatesThe creation of mobile subscribers can be simplified with the use of templates for mobilesubscribers. Please refer to the “OMN-SU:HLRi:Intro” document for a detailed descrip-tion on templates for the creation of mobile subscribers.

The following examples illustrate how MML commands can be used to reach this objec-tive:• Creation of the template:

CR MSUB: MSIN=12345, BSNBC=TELEPHON–123, MSUBTYP=TEMPLATE,BAOC=OC, BAIC=IC;ENTR CBSERV: MSIN=12345, CFSERV=CFNREPLY,BSFTNO=TELEPHON–101E;ENTR CBSERV: MSIN=12345, CBSERV=ALLCB;ENTR GCSERV: MSIN=12345, GCSERV=CALLHOLD&CALLWAIT;Result: A data record is created and this can be copied for any mobile subscriber.The standard values have been stored for all parameter values which have not beenexpressly input, e.g. for the category MSCAT=ORDINSUB. The template mobilesubscriber must not be created in the AC.

• Creation of a mobile subscriber:The mobile subscriber must be created in the AC.CR MSUB: MSIN=88321, REFMSIN=12345, NDC=179, BSNBC=TELEPHON–99123, NUMTYP=SINGLE, BAOC=NONE, BAIC=NONEResult: For a mobile subscriber with single numbering, the data record defined astemplate has been copied and the specified call barring has been immediately can-celed. The mobile subscriber has access to the TELEPHON basic service and toprecisely those supplementary services input in the template. In the absence of areply, call forwarding is activated to directory number 10199123.

• Creation of a mobile subscriber:The mobile subscriber must be created in the AC.CR MSUB: MSIN=88765, REFMSIN=12345, NUMTYP=MULTI, NDC=179, BSN-BC=TELEPHON–17999543–<bcie_telephone>&TS61–18099567–<bcie_ts61>,SUBRES=HPLMN;CAN GCSERV: MSIN=88765, GCSERV=CALLHOLD&CALLWAIT;ENTR CUGSERV: MSIN=88765, CUG=<cug_name>, DNIC=<dnic>, ILC=<ilc>,BSVG=TS60;Result: For a mobile subscriber with multinumbering, the data record defined astemplate has been copied and, for the subscriber relationship, defines the restrictionto the home PLMN (SUBRES=HPLMN) instead of the standard value(SUBRES=ONAOFPLM). TELEPHON and TS61 have been entered as telephoneservices. The supplementary services call hold and call waiting have been canceledand the association with a closed user group has been input for the fax serviceTS61. In the absence of a reply, call forwarding is activated to directory number10199543.

16 A50016-D1721-Q503-1-7619


2 Task List (TL)

2.1 Administration in the Authentication Center (AC)(See OMN-SU:HLRi:Intro, Section “Function and Administration of the Authentication Center”)

AC mobile subscriber administrationDisplay MSIN of created mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP ACMSUBCreate mobile subscriber in AC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR ACMSUBCancel mobile subscriber in AC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-021

2.2 Administration in the Home Location Register (HLR)

2.2.1 Administration of General HLR Data

2.2.1.1 General HLR Data except IN Services

(See OMN-SU:HLRi:Intro, Section “General HLR Data (except IN Services)”)

Roaming areasDisplay roaming areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP ROAMAREACreate a roaming area for “permitted” areas (ALLOWED=YES). . . . . . . . . . . . CR ROAMAREACreate a roaming area for “barred” areas (ALLOWED=NO) . . . . . . . . . . . . . . . CR ROAMAREAExpand a roaming area (ISDN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD ROAMAREAReduce a roaming area (CISDN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD ROAMAREACancel a roaming area

(If mobile subscribers are still created for this roaming area,the command will be rejected.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN ROAMAREA

Bearer capability information elementsDisplay bearer capability information elements . . . . . . . . . . . . . . . . . . . . . . . . . DISP GSMBCIECreate bearer capability information element . . . . . . . . . . . . . . . . . . . . . . . . . . CR GSMBCIEModify bearer capability information element . . . . . . . . . . . . . . . . . . . . . . . . . . MOD GSMBCIECancel bearer capability information element . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GSMBCIE

Quality of service profiles for GPRSDisplay quality of service profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP QOSPROFCreate quality of service profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR QOSPROFModify quality of service profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD QOSPROFCancel quality of service profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN QOSPROF

Directory numbers barred for call forwardingDisplay directory numbers barred for call forwarding . . . . . . . . . . . . . . . . . . . . . DISP PROHFTNOEnter directory numbers barred to all mobile subscribers for

call forwarding (FTNO only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR PROHFTNOCancel directory numbers barred to all mobile subscribers for

call forwarding (FTNO only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN PROHFTNO

iDisplay commands are only specified in the procedures when they are absolutely necessary. Generally,display commands are not necessary for confirming the execution of a command. It can already be seenfrom the command acknowledgment output by the system whether the command entered was correctlyexecuted. If it should be necessary for administrative reasons to receive an acknowledgment of the ex-ecuted tasks in addition to the run listing, the contents of the database can be displayed, for example,before and after or only after each task using the appropriate commands (see “TML”).Each task contains only the parameters or identifiers characteristic for that particular task.

A50016-D1721-Q503-1-7619 17

OperationSubscriber

OMN-SU:HLRi:MML

Enter directory numbers with a feature-dependent barringfor call forwarding (FTNO, SUBSET) . . . . . . . . . . . . . . . . . . . . . . . . . . . CR PROHFTNO

Cancel directory numbers with a feature-dependent barringfor call forwarding (FTNO, SUBSET) . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN PROHFTNO

Service addresses for subscriber-related routingDisplay service addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SUBRSERVCreate service address (IND, ADDRTYPE, ADDR) . . . . . . . . . . . . . . . . . . . . . . CR SUBRSERVModify service address (ADDRTYPE, ADDR) . . . . . . . . . . . . . . . . . . . . . . . . . . MOD SUBRSERVCancel service address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-125

Allocation list for call forwarding with abbreviated numbers(feature: subscriber-related routing)Display entries in the allocation list (SHRTCD) . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SUBRSERVEnter entries in the allocation list (SHRTCD, IND). . . . . . . . . . . . . . . . . . . . . . CR SUBRSERVModify entries in the allocation list (SHRTCD, IND). . . . . . . . . . . . . . . . . . . . . . MOD SUBRSERVCancel entries in the allocation list (SHRTCD) . . . . . . . . . . . . . . . . . . . . . . . . . . CAN SUBRSERV

Location services profilesDisplay location services profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP LCSCreate location services profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR LCSModify location services profile

(modifications on client data already part of the profile are not possible) MOD LCSCancel location services profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN LCS

2.2.1.2 CAMEL Services for Mobile Subscribers (Part of General HLR Data)

(See OMN-SU:HLRi:Intro, Section “General HLR Data: CAMEL Services for Mobile Subscribers”)

CAMEL services with following CSIs: O, D, T, VT, SS, SMS, M, GPRS, UDisplay CAMEL services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SUBRSERVCreate CAMEL service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR SUBRSERVModify CAMEL service in the HLR

(modifications on trigger detection points of O,T,VT,GPRS-CSIsor modifications on destination numbers of D-CSIs are not possible) . . MOD SUBRSERV

Update CAMEL service data in VLRs and/or SGSNs(MSIN=X, OPRSERV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERV

Cancel CAMEL service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-135

UG-CSIDisplay UG-CSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SUBRSERVCreate UG-CSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR SUBRSERVModify UG-CSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD SUBRSERVCancel UG-CSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN SUBRSERV

Multiple subscriber profile (MSP)Display MSP service (OPRSERV=MSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SUBRSERVCreate MSP service and related CAMEL services. . . . . . . . . . . . . . . . . . . . . . . CR SUBRSERVModify MSP service and related CAMEL services. . . . . . . . . . . . . . . . . . . . . . . MOD SUBRSERVCancel MSP service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-135

18 A50016-D1721-Q503-1-7619


2.2.2 Mobile Subscriber Administration in the HLR(See OMN-SU:HLRi:Intro, Section “HLR Data for Mobile Subscribers”)

2.2.2.1 Circuit-Switched Domain

This section describes only the tasks relevant for access to the circuit-switched domain.For access to the packet-switched domain see Section 2.2.2.2.

General mobile subscriber dataDisplay mobile subscriber data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay WLL subscribers (SELECT=WLLSUB) . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay current VLR address of a mobile subscriber

(DATAKD=MOBDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay network access mode of a mobile subscriber

(DATAKD=GENRDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay basic MSISDN for mobile subscriber with multinumbering

(DATAKD=GENRDATA; the first SN displayed) . . . . . . . . . . . . . . . . . . DISP MSUBDisplay mobile subscribers with optimal routing (SELECT=OR) . . . . . . . . . . . . DISP MSUBCreate a “GSM only” mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-110Create a WLL subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-119Modify network access mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-320Modify telecommunication services for a mobile subscriber

with single numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-112Modify telecommunication services for a mobile subscriber

with multinumbering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-113Modify SN of a mobile subscriber with single numbering

(BSNBC=bsv – new sn [...], CBSNBC=any old bsv – old sn) . . . . . . . . MOD MSUBModify SN of a mobile subscriber with multinumbering

(BSNBC=old bsv – new sn [...], CBSNBC=old bsv – old sn [...]) . . . . . . MOD MSUBModify category of a mobile subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBModify operator-determined barring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBModify subscription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBModify preferred interexchange carrier of a mobile subscriber . . . . . . . . . . . . . MOD MSUBModify optimal routing subscription. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBBlock mobile subscriber, for administration

(BAOC=OC, BAIC=IC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBUnblock mobile subscriber, for administration

(BAOC=NONE, BAIC=NONE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBCancel mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-115Cancel mobile subscriber entries in VLR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-117

Expiry dateDisplay subscribers with certain expiry date (EXPIRY) . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay expiry dates of subscribers (DATAKD=GENRDATA) . . . . . . . . . . . . . . DISP MSUBDisplay expired subscribers (SELECT=EXPIRED) . . . . . . . . . . . . . . . . . . . . . . DISP MSUBEnter expiry date of a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-120Modify expiry date of a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBReactivate expired subscribers (EXPIRY=<future date>) . . . . . . . . . . . . . . . . . . . . MOD MSUBCancel expiry date of a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUB

Display for supplementary services (SS)Display activated supplementary services (DATAKD=SSDATA) . . . . . . . . . . . . DISP MSUBDisplay all supplementary services assigned to a subscriber

(DATAKD=ALLDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all subscribers having a subscription for a certain

supplementary service (SSV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUB

A50016-D1721-Q503-1-7619 19

OperationSubscriber

OMN-SU:HLRi:MML

SS Call forwardingDisplay timer for call forwarding on no reply

(DATAKD=SSDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBEnter authorization for call forwarding services . . . . . . . . . . . . . . . . . . . . . . . . TS-260Assign service for translation of forwarded-to numbers in unknown format. . . . TS-263Enter call forwarding service data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CFSERVModify timer for call forwarding on no reply

(MSIN, RCTIM, BSFTNO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CFSERVActivate call forwarding service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-261Deactivate call forwarding service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-262Cancel authorization for call forwarding services (MSIN, CFSERV) . . . . . . . . . CAN CFSERVCancel assignment of service for translation of forwarded-to numbers . . . . . . . CAN OPRSERV

SS Call barringEnter call barring service data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CBSERVDisplay password for call barring (DATAKD=ALLDATA) . . . . . . . . . . . . . . . . . . DISP MSUBModify password for call barring (MSIN, PW) . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CBSERVModify check on call barring (operator or mobile subscriber

using SCI) (MSIN, CCB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CBSERVEnter call barring service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-265Activate call barring service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CBSERVDeactivate call barring service (MSIN, CBSERV, BSVG) . . . . . . . . . . . . . . . . . . . . CAN CBSERVCancel call barring service (MSIN, CBSERV) . . . . . . . . . . . . . . . . . . . . . . . . . . CAN CBSERVCancel call barring after mobile subscriber has entered the password

three times incorrectly (MSIN, PW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CBSERV

SS Closed user groupsDisplay mobile-subscriber-related data for closed user group

(DATAKD=CUGDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBEnter supplementary service closed user group

(MSIN, CUG, BSVG, DNIC, ILC)(new closed user groups can not be assigned to subscribers alreadyhaving a CUG assigned) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERV

Enter additional telecommunication services for an already assignedclosed user group (MSIN, CUG, BSVG). . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERV

Cancel telecommunication service from a closed user group(MSIN, CUG, BSVG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN CUGSERV

Enter preferential closed user group for a basic service group . . . . . . . . . . . . TS-170Modify preferential closed user group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-171Cancel definition of a preferential closed user group for a

basic service group (MSIN, BSVG, PCUG) . . . . . . . . . . . . . . . . . . . . . . CAN CUGSERVEnter restriction on outgoing calls within a closed user group . . . . . . . . . . . . . TS-172Enter restriction on incoming calls within a closed user group

(MSIN, BSVG, INTRACR=ICB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVModify restriction on call setup within a closed user group

(MSIN, CUG, INTRACR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVCancel all restrictions on call setup within a closed user group

(MSIN, CUG, INTRACR=NONE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVEnter authorization for incoming and/or outgoing access

(MSIN, BSVG, INTERCA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVModify authorization for incoming and/or outgoing access

(MSIN, BSVG, INTERCA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVCancel all authorizations for incoming and/or outgoing access

(MSIN, BSVG, INTERCA=NONE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVCancel assignment of mobile subscriber to a specific

closed user group (MSIN, CUG). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN CUGSERV

20 A50016-D1721-Q503-1-7619


Cancel all closed user group assignments for a mobile subscriber(only MSIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN CUGSERV

SS Call transfer, Call waiting, Call hold and MultipartyEnter call transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-188Cancel call transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-189Enter call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-181Activate call waiting (GCSERV=CALLWAIT – ACT) . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVDeactivate call waiting (GCSERV=CALLWAIT – ACT) . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVCancel call waiting (GCSERV=CALLWAIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVEnter call hold (GCSERV=CALLHOLD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVCancel call hold (GCSERV=CALLHOLD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVEnter multiparty service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-180Cancel multiparty service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-184

SS Line identification services (CLIP, CLIR, COLP, COLR)Enter calling line identification presentation (CLIP). . . . . . . . . . . . . . . . . . . . . TS-185Enter calling line identification restriction (CLIR). . . . . . . . . . . . . . . . . . . . . . . TS-186Modify priority for use of CLIR (MSIN, CLIRPRES) . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVEnter connected line identification presentation (COLP) . . . . . . . . . . . . . . . . TS-187Enter connected line identification restriction (GCSERV=COLR) . . . . . . . . . . ENTR GCSERVEnter CLIP override (CLIPOVR=YES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVCancel CLIP override (CLIPOVR=NO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVEnter COLP override (COLPOVR=YES). . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVCancel COLP override (COLPOVR=NO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVCancel line identification services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

SS Advice of charge, Hot billingEnter advice of charge, information level (GCSERV=AOCINFO) . . . . . . . . . . ENTR GCSERVEnter advice of charge, charging level (GCSERV=AOCCHRG) . . . . . . . . . . . ENTR GCSERVEnter hot billing (GCSERV=HOTBILL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVCancel general call services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

SS Call completion to busy subscriberEnter CCBS for A-subscriber, national version (GCSERV=NATCCBS) . . . . . ENTR GCSERVEnter CCBS for A-subscriber, standardized version (GCSERV=CCBSA) . . . ENTR GCSERVEnter CCBS for B-subscriber, standardized version or

both versions used in project (GCSERV=CCBSB) . . . . . . . . . . . . . . . . ENTR GCSERVCancel authorization for CCBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

SS Enhanced multi-level precedence and preemptionEnter eMLPP [and a priority] (GCSERV=EMLPP [, PRIO]) . . . . . . . . . . . . . . ENTR GCSERVCancel eMLPP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

SS Follow meEnter follow me for A-subscriber (GCSERV=FOLLOWME) . . . . . . . . . . . . . . ENTR GCSERVEnter follow me for B-subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-165Enter follow me supervisor, including subscription for follow me

(GCSERV=FMSPV). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVCancel follow me . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-166Cancel follow me supervisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-167

SS Location servicesEnter location service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-190Activate location service (GCSERV=<service> – ACT) . . . . . . . . . . . . . . . . . . . ENTR GCSERVDeactivate location service (GCSERV=<service> – PROV) . . . . . . . . . . . . . . . . . . ENTR GCSERVCancel location service (GCSERV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

SS User-to-user signaling service 1, Further national SSEnter user-to-user signaling service 1 (GCSERV=USERSIG1) . . . . . . . . . . . ENTR GCSERV

A50016-D1721-Q503-1-7619 21

OperationSubscriber

OMN-SU:HLRi:MML

Enter additional national supplementary services (GCSERV=<natssxx>). . . . ENTR GCSERVCancel general call services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

Assignment of CAMEL services with following CSIs: O, D, T, VT, SS, SMS, MDisplay assignment of CAMEL services (DATAKD=ALLDATA) . . . . . . . . . . . . . DISP MSUBDisplay all subscribers using a certain CAMEL service

(OPRSERV=<type>–<name>) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBAssign CAMEL service to a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVActivate CAMEL services of a subscriber

(OPRSERV=ALLCSI–<name or X>–ACT) . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVDeactivate CAMEL services of a subscriber

(OPRSERV=ALLCSI–<name or X>–DACT) . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVCancel assignment of CAMEL services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN OPRSERV

Assignment of CAMEL service for translation of FTNO in unknown format (TIF-CSI)Display assignment of TIF-CSI (DATAKD=ALLDATA) . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all subscribers having a TIF-CSI (OPRSERV=TIFCSI) . . . . . . . . . . . . . DISP MSUBAssign service for translation of FTNO to a subscriber . . . . . . . . . . . . . . . . . . . TS-263Cancel assignment of TIF-CSI (OPRSERV=TIFCSI) . . . . . . . . . . . . . . . . . . . . . CAN OPRSERV

Assignment of U-CSI to mobile subscriberDisplay U-CSI of a mobile subscriber (DATAKD=ALLDATA) . . . . . . . . . . . . . . . DISP MSUBDisplay all subscribers using a certain U-CSI (OPRSERV=UCSI-<name>) . . . . DISP MSUBAssign predefined U-CSI to mobile subscriber (OPRSERV=UCSI-<name>) . . ENTR OPRSERVAssign U-CSI directly to mobile subscriber (OPRSERV=UCSI, UCSI) . . . . . . . ENTR OPRSERVCancel U-CSI of a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN OPRSERV

Subscriber-related routingDisplay subscriber-related routing (DATAKD=ALLDATA). . . . . . . . . . . . . . . . . . DISP MSUBEnter subscriber-related routing (OPRSERV=SUBRELRO) . . . . . . . . . . . . . . ENTR OPRSERVCancel subscriber-related routing (OPRSERV=SUBRELRO) . . . . . . . . . . . . . . CAN OPRSERV

Authorization for voice broadcast/group callsDisplay group IDs of a subscriber (DATAKD=ALLDATA) . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all subscribers with authorization for voice broadcast/group calls

(BSV=VBS or VGCS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBAssign group ID to a subscriber

(new VBS/VGCS data can not be assigned to subscribers alreadyhaving a VBS/VGCS assigned) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR VGSGRP

Cancel group ID of a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN VGSGRPEnter authorization for voice group calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-131Enter authorization for voice broadcast calls . . . . . . . . . . . . . . . . . . . . . . . . . . TS-132Cancel authorization for all voice group calls (SERV=VGCS) . . . . . . . . . . . . . . CAN VGSGRPCancel authorization for all voice broadcast calls (SERV=VBS) . . . . . . . . . . . . CAN VGSGRP

Double mobile subscribersDisplay link between two mobile subscribers . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBLINKEnter link between two existing mobile subscribers. . . . . . . . . . . . . . . . . . . . . CR MSUBLINKCancel link between two mobile subscribers . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBLINKDisplay double mobile subscribers (SELECT=MSUBLINK) . . . . . . . . . . . . . . . . DISP MSUBCreate double mobile subscriber in the HLR . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-130Cancel double mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-115

Regional roaming restrictionsDisplay regional roaming restrictions for mobile subscribers

(MSIN, DATAKD=ALLDATA or RSDATA) . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all mobile subscribers with regional roaming restrictions

(MSIN=X, DATAKD=RSDATA, SELECT=RSSERV [...]) . . . . . . . . . . . . DISP MSUBEnter regional roaming restrictions for mobile subscribers . . . . . . . . . . . . . . . ENTR RSSERVCancel regional roaming restrictions for mobile subscribers . . . . . . . . . . . . . . . CAN RSSERV

22 A50016-D1721-Q503-1-7619


Prepayment of chargesEnter prepayment of charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-305Cancel prepayment of charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-306

Change to a new SIM cardDisplay mobile subscribers for which a change order exists

(DATAKD=GENRDATA, SELECT=SIMCCH) . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay change orders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SIMCCHEnter change order (for single mobile subscriber) . . . . . . . . . . . . . . . . . . . . . TS-140Enter change order for double mobile subscriber . . . . . . . . . . . . . . . . . . . . . . TS-141Activate change for change orders controlled by location update

which have not yet been executed . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-142Cancel change order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN SIMCCH

IMSI tracingDisplay IMSI trace jobs for a mobile subscriber

(MSIN, DATAKD=GENRDATA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all mobile subscribers with active IMSI trace jobs

(MSIN=X, DATAKD=GENRDATA, SELECT=IMSITRAC). . . . . . . . . . . DISP MSUBActivate IMSI trace job for a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . ACT IMSITRACDeactivate IMSI trace job for a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . DACT IMSITRAC

Additional project specific supplementary featuresDisplay mobile subscribers with supplementary features

(MSIN, DATAKD=ALLDATA, MSUBFT=<msubftxx> . . . . . . . . . . . . . . DISP MSUBEnter a supplementary feature for a mobile subscriber

(MSIN, MSUBFT=<msubftxx> [– <supplementarydata>]) . . . . . . . . . . . ENTR MSUBFTCancel a supplementary feature for a mobile subscriber

(MSIN, MSUBFT=<msubftxx>) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBFT

Templates for the creation of mobile subscribersDisplay the data of templates (SELECT=TEMPLATE). . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all existing templates (MSIN=X, SELECT=TEMPLATE) . . . . . . . . . . . . DISP MSUBCreate templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-200Modify templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-201Reactivate expired templates (EXPIRY=<future date>) . . . . . . . . . . . . . . . . . . . . . MOD MSUBCancel templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUB

Mobility dataDisplay mobility data (DATAKD=MOBDATA). . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBActivate HLR update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT HLRUPD

2.2.2.2 Packet-Switched Domain

This section describes only the tasks relevant for access to the packet-switched domain.For access to the circuit-switched domain see Section 2.2.2.1.

General mobile subscriber dataDisplay mobile subscriber data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay current SGSN address of a mobile subscriber

(DATAKD=MOBDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay network access mode of a mobile subscriber

(DATAKD=GENRDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBCreate a “GPRS only” mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-300Modify network access mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-320Modify telecommunication services for a mobile subscriber

with single numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-112Modify telecommunication services for a mobile subscriber

with multinumbering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-113Modify SN of a mobile subscriber with single numbering

A50016-D1721-Q503-1-7619 23

OperationSubscriber

OMN-SU:HLRi:MML

(BSNBC=bsv – new sn [...], CBSNBC=any old bsv – old sn). . . . . . . . . MOD MSUBModify SN of a mobile subscriber with multinumbering

(BSNBC=old bsv – new sn [...], CBSNBC=old bsv – old sn [...]) . . . . . . MOD MSUBModify subscription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBModify category of a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBModify operator-determined barring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBModify general charging characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBBlock mobile subscriber, for administration

(BAOC=OC, BAIC=IC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBUnblock mobile subscriber, for administration

(BAOC=NONE, BAIC=NONE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBCancel mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-115Cancel mobile subscriber entries in SGSN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-117

Expiry dateDisplay subscribers with certain expiry date (EXPIRY). . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay expiry dates of subscribers (DATAKD=GENRDATA). . . . . . . . . . . . . . . DISP MSUBDisplay expired subscribers (SELECT=EXPIRED) . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBEnter expiry date of a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-120Modify expiry date of a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBReactivate expired subscribers (EXPIRY=<future date>) . . . . . . . . . . . . . . . . . . . . MOD MSUBCancel expiry date of a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUB

PDP context records for GPRS subscribersDisplay PDP context records of a GPRS subscriber

(DATAKD=ALLDATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all GPRS subscribers having assigned a certain quality of

service profile (QOSPROF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBEnter PDP context record for a GPRS subscriber . . . . . . . . . . . . . . . . . . . . . . ENTR GPRSERVModify PDP context record for a GPRS subscriber (overwrite old record) . . . . ENTR GPRSERVCancel PDP context record of a GPRS subscriber. . . . . . . . . . . . . . . . . . . . . . . CAN GPRSERV

24 A50016-D1721-Q503-1-7619


Assignment of CAMEL services with following CSIs: SMS, GPRSDisplay assignment of CAMEL services (DATAKD=ALLDATA). . . . . . . . . . . . . DISP MSUBDisplay all subscribers using a certain CAMEL service

(OPRSERV=<type>–<name>) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBAssign CAMEL service to a subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVActivate CAMEL services of a subscriber

(OPRSERV=ALLCSI–<name or X>–ACT) . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVDeactivate CAMEL services of a subscriber

(OPRSERV=ALLCSI–<name or X>–DACT) . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVCancel assignment of CAMEL services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN OPRSERV

Prepayment of chargesDisplay barring status of a GPRS subscriber with proprietary

prepayment of charges (DATAKD=MOBDATA) . . . . . . . . . . . . . . . . . . DISP MSUBEnter prepayment of charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-305Cancel prepayment of charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-306

Change to a new SIM cardDisplay mobile subscribers for which a change order exists

(DATAKD=GENRDATA, SELECT=SIMCCH) . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay change orders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SIMCCHEnter change order for single mobile subscriber. . . . . . . . . . . . . . . . . . . . . . . TS-140Enter change order for double mobile subscriber . . . . . . . . . . . . . . . . . . . . . . TS-141Activate change for change orders controlled by location update

which have not yet been executed . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-142Cancel change order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN SIMCCH

Templates for the creation of mobile subscribersDisplay the data of templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBDisplay all existing templates (MSIN=X, SELECT=TEMPLATE) . . . . . . . . . . . . DISP MSUBCreate templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-200Modify templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-201Reactivate expired templates (EXPIRY=<future date>) . . . . . . . . . . . . . . . . . . . . . MOD MSUBCancel templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUB

Mobility dataDisplay mobility data (DATAKD=MOBDATA). . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBActivate HLR update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT HLRUPD

2.3 Administration of the VLR and the SGSN via the HLR(See OMN-SU:HLRi:Intro, Section “Administration of the VLR and the SGSN via the HLR”)Cancel mobile subscriber data in the VLR or the SGSN . . . . . . . . . . . . . . . . . . TS-117

A50016-D1721-Q503-1-7619 25

OperationSubscriber

OMN-SU:HLRi:MML

3 Task Summary Lists (TS)

26 A50016-D1721-Q503-1-7619

OMN-SU:HLRi:MMLTS-021

OperationSubscriber

Remark:Tasks with the comment "if required" are omitted if they have already been carried out in another step.

TS-021 Cancel mobile subscriber in the AC

1 Check whether the mobile subscriber is still created in the HLR . . . . . . . . . . . . . . . . DISP MSUB

2 Cancel the mobile subscriber in the HLR (if required) . . . . . . . . . . . . . . . . . . . . . . . . TS-115

3 Cancel mobile subscriber in the AC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN ACMSUB

A50016-D1721-Q503-1-7619 27

OperationSubscriber



TS-110 Create mobile subscriber with network access mode “GSM only” in the HLR

1 Check whether the mobile subscriber has been created in the AC . . . . . . . . . . . . . . DISP ACMSUB

2 Create mobile subscriber in the AC (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR ACMSUB

3 Check whether the MSIN and SN to be used for the mobile subscriberare still free (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBThis command must be entered once for the MSIN and for each SN.

4a Create mobile subscriber with single numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-210

4b Create mobile subscriber with multinumbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-211

28 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-112 Modify telecommunication service for a mobile subscriber with single num-bering

1a Add telecommunication service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, BSNBC

1b Cancel telecommunication service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, CBSNBC

1c Replace telecommunication service with another one. . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, CBSNBC, BSNBC

A50016-D1721-Q503-1-7619 29

OperationSubscriber



TS-113 Modify telecommunication service for mobile subscriber with multinumbering

1 Check whether all required bearer capability informationelements have been created. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP GSMBCIE

2 Create the missing bearer capability information elements (if required). . . . . . . . . . . CR GSMBCIE

3a Add telecommunication service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, BSNBC

3b Cancel telecommunication service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, CBSNBC

3c Replace telecommunication service with another one . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, CBSNBC, BSNBC

30 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-115 Cancel mobile subscriber in the HLR

1 Check whether a pending SIM change or a link to another subscriber(double subscriber) has been entered.Note VLR ISDN and SGSN ISDN of the subscriber. . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: DATAKD=DIAGDATA, MSIN

2 Cancel pending SIM change for the subscriber (if required). . . . . . . . . . . . . . . . . . . CAN SIMCCHusing: MSIN

3 Cancel link to other subscriber (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBLINKusing: MSIN

4 Cancel subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBusing: MSINThe order of cancellation for each subscriber is: first in HLR and then in SGSN andVLR (if applicable). If a subscriber is not canceled in the VLR or in the SGSN becausethe entity is not reachable, a message is displayed. In this case the subscriber hasto be canceled in VLR and/or SGSN by an additional MML command when theVLR/the SGSN is reachable again (see TS-117). The VLR ISDN/SGSN ISDN num-ber has to be determined before cancellation in the HLR, see task number 1.

To remove the mobile subscriber completely from the PLMN, he must then still be canceled in the AC.

A50016-D1721-Q503-1-7619 31

OperationSubscriber



TS-117 Cancel mobile subscriber entries in VLR and/or SGSN

1a Cancel one or more own mobile subscribers still existing in the HLRin any VLR and/or SGSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBusing: MSIN=<MSINs of subscribers to be canceled, linked by &, ranges allowed>,VLRISD=X and/or SGSNISD=XThe VLR ISDNs/SGSN ISDNs are retrieved from the mobility data stored in the HLR.The VLR and the SGSN may be located in any PLMN.

1b Cancel own mobile subscriber already canceled in the HLRin any VLR and/or SGSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBusing: MSIN=<MSIN of one subscriber>,VLRISD=<one ISDN> and/or SGSNISD=<one ISDN>The command has to be repeated for all subscribers to be canceled. The VLR andthe SGSN may be located in any PLMN.

1c Cancel any mobile subscriber in a VLR and/or an SGSN of the own PLMN . . . . . . . CAN MSUBusing: IMSI, VLRISD and/or SGSNISDThis input format allows mobile subscribers whose subscription is based in any (oth-er) PLMN to be canceled in any VLR and/or SGSN of the own PLMN (if cancellationis not blocked by related configuration, project and office data).

32 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-119 Create a WLL subscriber in the HLR

1 Check whether the WLL subscriber is created in the AC. . . . . . . . . . . . . . . . . . . . . . DISP ACMSUB

2 Create the WLL subscriber in the AC (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . CR ACMSUB

3a Create a WLL subscriber with single numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBusing: LAC [, NUMTYP=SINGLE]The parameter NUMTYP has to be entered if the feature “multinumbering” is activat-ed in the HLR, because in this case the default value for NUMTYP is ”MULTI” (seeDISP MSERVOPT).

3b Create a WLL subscriber with multinumbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBusing: LACA WLL subscriber can only be created with multinumbering if the feature ”multinum-bering” is activated in the HLR (see DISP MSERVOPT).

4 Enter a regional roaming restriction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR RSSERVExecution of this task is optional

All additional services are administered in the same way as for normal mobile subscribers.

A50016-D1721-Q503-1-7619 33

OperationSubscriber



TS-120 Enter expiry date for a subscriber

1 Check whether a SIM change or a link to another subscriber(double subscriber) has been entered for the subscriber . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: MSIN, DATAKD=MOBDATA

2 Cancel SIM change for the subscriber (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . CAN SIMCCH

3 Cancel link to another subscriber (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBLINK

4 Enter expiry date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUB

34 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-121 Enter prepayment of charges for access to the circuit-switched domain

By this task you create and assign CAMEL services for charging of MOC, call forwarding and SMS-MO. If othercall types are to be charged the corresponding CAMEL services have to be created and assigned instead (e.g.OPRSERV=TCSI for charging of MTC).

1 Check which supplementary services have been assigned. . . . . . . . . . . . . . . . . . . . DISP MSUBusing: DATAKD=SSDATAThe general call services Call transfer and Advice of charge (charging level) may notbe assigned.

2 Cancel general call services (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

3 Check whether the required CAMEL services have already been created . . . . . . . . DISP SUBRSERV

4 Create a CAMEL service for charging of MOC and call forwarding (if required) . . . . CR SUBRSERVusing: OPRSERV=OCSI, REPHNDL=ALLCB-ALLCB, DEFCALL=RELEASE

5 Create a CAMEL service for charging of SMS-MO (if required) . . . . . . . . . . . . . . . . CR SUBRSERVusing: OPRSERV=SMSCSI, REPHNDL=TS22NA-TS22NA, DEFCALL=RELEASE

6 Assign the CAMEL services to the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERV

A50016-D1721-Q503-1-7619 35

OperationSubscriber



TS-125 Cancel service address for subscriber-related routing

1 Check whether there are any mobile subscribers who still haveauthorization for this service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP SUBRSERV

2 Cancel authorization for these mobile subscribers (if required) . . . . . . . . . . . . . . . . . CAN OPRSERV

3 Cancel service address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN SUBRSERVusing: OPRSERV=SUBRELRO, SERV

36 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-130 Create double mobile subscriber

1 Create first mobile subscriber (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-110

2 Create second mobile subscriber (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-110

3 Check whether an expiry date bas been entered for the subscribers . . . . . . . . . . . . DISP MSUBusing: DATAKD=GENRDATA

4 Cancel expiry date for the subscribers (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUB

5 Enter link between mobile subscribers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBLINK

Note: Only one of the linked mobile subscribers may be active at any time, i.e. the two associated SIMs cannot beused simultaneously. During a location update of one of the linked mobile subscribers the other is automaticallymarked as non-active.

A50016-D1721-Q503-1-7619 37

OperationSubscriber



TS-131 Enter authorization for voice group calls

Authorization for voice group calls can only be entered if the teleservice TELEPHON is subscribed. New voicegroup call data can not be assigned to subscribers already having a VGCS assigned.

1 Check whether the service has already been assigned to the subscriber . . . . . . . . . DISP MSUBusing: MSIN, DATAKD=GENRDATA

2 Assign service VGCS to the subscriber (if required). . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, BSNBC=VGCS[-sn]

3 Assign group ID to the subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR VGSGRPusing: MSIN, SERV=VGCS, GRPID

38 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-132 Enter authorization for voice broadcast calls

Authorization for voice broadcast calls can only be entered if the teleservice TELEPHON is subscribed. New voicebroadcast data can not be assigned to subscribers already having a VBS assigned.

1 Check whether the service has already been assigned to the subscriber . . . . . . . . . DISP MSUBusing: MSIN, DATAKD=GENRDATA

2 Assign service VBS to the subscriber (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: MSIN, BSNBC=VBS[-sn]

3 Assign group ID to the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR VGSGRPusing: MSIN, SERV=VBS, GRPID=<group ID>[-<permission to initiate broadcast callfor this group ID>]

A50016-D1721-Q503-1-7619 39

OperationSubscriber



TS-135 Cancel CAMEL services or MSP service for mobile subscribers in the HLR

1 Check whether mobile subscribers with authorization for theassociated service still exist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: OPRSERV=<type of service> – <service name>

2 Cancel the authorization for relevant mobile subscribers (if required) . . . . . . . . . . . . CAN OPRSERV

3 Cancel the service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN SUBRSERVusing: OPRSERV, SERV

40 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-140 Enter data for changing the SIM card of a mobile subscriber

1 Create mobile subscriber with the new MSIN in the AC . . . . . . . . . . . . . . . . . . . . . . CR ACMSUBThis task can only be carried out in the way described here if local administration ofmobile subscribers in the AC is allowed. In all other cases, a valid method must beused to create the mobile subscriber (project-specific).

2 Check whether an expiry date has been entered for the subscriber . . . . . . . . . . . . . DISP MSUBusing: DATAKD=GENRDATA

3 Cancel expiry date for the subscriber (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUB

4 Enter change order for the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR SIMCCH

5 Check whether the change order has been executed (if required) . . . . . . . . . . . . . . DISP MSUBusing: e.g. DATAKD=GENRDATA, SELECT=SIMCCHThe next step must not be carried out until the mobile subscriber has been changedand the semipermanent mobile subscriber data have been updated in the HLR.Therefore wait until this command no longer displays the change order in its output,not even with status ACTIVE.

6 After the change has been executed in the HLR:Cancel the old mobile subscriber entry in the AC . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN ACMSUBusing: MSIN=<old msin>

7 Reenter expiry date for the subscriber (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUB

A50016-D1721-Q503-1-7619 41

OperationSubscriber



TS-141 Enter data for changing the SIM card(s) of a double mobile subscriber

Tasks 1 and 2 can only be carried out in this way if local administration of mobile subscribers in the AC is allowed.In all other cases, a valid method must be used to create the mobile subscribers (project-specific).

In steps 4 and 5, it is advisable to enter the command with TIME=OPR because in this case the new SIM becomesvalid for both mobile subscribers immediately and it is not necessary to wait to enter the new link until the two sub-scribers have performed a location update independently of one another.

1 Create first mobile subscriber with the new MSIN in the AC . . . . . . . . . . . . . . . . . . . CR ACMSUB

2 Create second mobile subscriber with the new MSIN in the AC. . . . . . . . . . . . . . . . . CR ACMSUB

3 Cancel link between mobile subscribers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBLINK

4 Enter change order for the SIM card of the first mobile subscriber. . . . . . . . . . . . . . . ENTR SIMCCH

5 Enter change order for the SIM card of the second mobile subscriber. . . . . . . . . . . . ENTR SIMCCH

6 Check whether the change order has been executed (if required) . . . . . . . . . . . . . . . DISP MSUBusing: e.g. DATAKD=GENRDATA, SELECT=SIMCCHThe next steps must not be carried out until the mobile subscriber has been changedand the semipermanent mobile subscriber data have been updated in the HLR.Therefore wait until this command no longer displays the change order in its output,not even with status ACTIVE.

7 Enter link between mobile subscribers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBLINKusing: MSIN1=<new msin1> and MSIN2=<new msin2>

8 Cancel old entry for first mobile subscriber in the AC. . . . . . . . . . . . . . . . . . . . . . . . . CAN ACMSUBusing: MSIN=<old msin>

9 Cancel old entry for second mobile subscriber in the AC . . . . . . . . . . . . . . . . . . . . . . CAN ACMSUBusing: MSIN=<old msin>

The task procedure as described above assumes that both mobile subscribers are to receive a new SIM card. Ifthis only applies to one mobile subscriber, the steps for the second subscriber (2, 5, 9) should be omitted.

42 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-142 Activate change for SIM change orders controlled by location update whichhave not yet been executed

1 Check which mobile subscribers require change. . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: DATAKD=GENRDATA, SELECT=SIMCCH

2 For mobile subscribers for whom the status PROVIDED was output:Activate change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR SIMCCHusing: TIME=OPRThe mobile subscriber's old SIM becomes invalid immediately.

3 Cancel mobile subscriber in the AC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN ACMSUBusing: MSIN=<old MSIN>

A50016-D1721-Q503-1-7619 43

OperationSubscriber



TS-165 Assign the supplementary service “follow me” to subscriber B

1 Check whether the service “call forwarding unconditional” has been assigned . . . . . DISP MSUBusing: MSIN or SN, DATAKD=SSDATA

2 Assign the service “call forwarding unconditional” (if required). . . . . . . . . . . . . . . . . . ENTR CFSERVusing: MSIN, CFSERV=CFU

3 Assign the service “follow me” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=FOLLOWME

44 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-166 Cancel the supplementary service “follow me”

1 Cancel the service follow me . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=FOLLOWME

2 If the supplementary service “call forwarding unconditional” is also to becanceled: cancel call forwarding unconditional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=CFU

As the service “follow me” uses the functionality of the service “call forwarding unconditional”, a subscriber maynot use both services at the same time. When the provision for “follow me” is withdrawn, the provision for “callforwarding unconditional” may also be withdrawn or the subscriber may be allowed to use this service from nowon.

A50016-D1721-Q503-1-7619 45

OperationSubscriber



TS-167 Cancel “follow me supervisor”

1 Withdraw the supervisor status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=FMSPVThis command cancels also the implicit authorization for the service “follow me”. Ifthe subscriber is from now on to be allowed to use the service “follow me” withoutbeing a supervisor, the service “follow me” has to be (re)assigned to the subscriber.

46 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-170 Enter preferential closed user group

1 Check whether barring for outgoing calls (OCB) has been enteredfor the CUG and the service in question . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: MSIN, DATAKD=CUGDATA

2 Set barring to NONE (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVusing: MSIN, BSVG, INTRACR=NONE

3 Enter preferential closed user group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVusing: MSIN, BSVG, PCUG

A50016-D1721-Q503-1-7619 47

OperationSubscriber



TS-171 Modify preferential closed user group for basic service group

1 Cancel preferential closed user group for basic service group . . . . . . . . . . . . . . . . . . CAN CUGSERVusing: MSIN, PCUG=<old pcug>, BSVG

2 Create closed user group for mobile subscriber (if required) . . . . . . . . . . . . . . . . . . . ENTR CUGSERVusing: MSIN, CUG, BSVG, DNIC, ILC

3 Enter basic service group for the new preferential closed user group (if required). . . ENTR CUGSERVusing: MSIN, CUG, BSVG

4 Enter the new preferential closed user group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-170

48 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-172 Enter restriction on outgoing calls within a closed user group

1 Check whether the CUG is the preferential CUG for one or more services. . . . . . . . DISP MSUBusing: MSIN, DATAKD=CUGDATA

2 Cancel status preferential CUG (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN CUGSERVusing: MSIN, BSVG, PCUG

3 Enter restriction on outgoing calls for the CUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CUGSERVusing: MSIN, CUG, INTRACR=OCB

A50016-D1721-Q503-1-7619 49

OperationSubscriber



TS-180 Enter supplementary service multiparty service

1 Check whether the supplementary service call hold has already been enteredfor the mobile subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: MSIN, DATAKD=SSDATA

2 Enter supplementary service call hold (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CALLHOLD

3 Enter supplementary service multiparty service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=MPTY

50 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-181 Enter supplementary service call waiting

1a Enter supplementary service call waiting and activate it immediately . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CALLWAIT–ACT

1b Enter provision for supplementary service call waiting . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CALLWAIT

The supplementary service ”call waiting” must be activated explicitly:– either by the system operator– or by subscriber controlled input

A50016-D1721-Q503-1-7619 51

OperationSubscriber



TS-184 Cancel supplementary service multiparty service

1a Cancel supplementary services multiparty service and call hold . . . . . . . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=MPTY & CALLHOLD

1b Cancel supplementary service multiparty service, but keep service call hold . . . . . . CAN GCSERVusing: MSIN, GCSERV=MPTY

52 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-185 Enter supplementary service calling line identification presentation (CLIP)

1a Enter supplementary service CLIP with authorization for CLIP override . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CLIP, CLIPOVR=YES

1b Enter supplementary service CLIP without authorization for CLIP override . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CLIP

A50016-D1721-Q503-1-7619 53

OperationSubscriber



TS-186 Enter supplementary service calling line identification presentation restriction(CLIR)

1 Enter supplementary service COLP with authorization for COLP override. . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CLIR, CLIRPRES

Three presentation modes (CLIRPRES) are available for CLIR:– PERM: CLIR is always active– TEMPRES: CLIR is active by default but can be deactivated by the subscriber on a per call basis– TEMPNRES: CLIR is not active by default but can be activated by the subscriber on a per call basis

54 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-187 Enter supplementary service connected line identification presentation(COLP)

1a Enter supplementary service COLP with authorization for COLP override . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=COLP, COLPOVR=YES

1b Enter supplementary service COLP without authorization for COLP override. . . . . . ENTR GCSERVusing: MSIN, GCSERV=COLP

A50016-D1721-Q503-1-7619 55

OperationSubscriber



TS-188 Enter supplementary service call transfer

1 Check whether the supplementary service call hold has already been enteredfor the mobile subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: MSIN, DATAKD=SSDATA

2 Enter supplementary service call hold (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CALLHOLD

3 Enter supplementary service call transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CT

56 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-189 Cancel supplementary service call transfer

1a Cancel supplementary services call transfer and call hold . . . . . . . . . . . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=CT & CALLHOLD

1b Cancel supplementary service call transfer, but keep service call hold. . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=CT

A50016-D1721-Q503-1-7619 57

OperationSubscriber



TS-190 Enter location service

1 Enter provision for a location service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=<service> [– ACT], [LCS]

Notes:• <service>:

The following services are available:– universal class: UNIVERS– call related class: CREL– call unrelated class: CUNREL– PLMN operator class: PLMNOPR– basic self-location: BSLC– autonomous self-location: ASLC

• ACT:The service can be activated immediately or just provisioned and activated later. Activation can only be per-formed by the system operator, not by the subscriber.

• LCS:The LCS profile assigned by this parameter must already exist (to check this use DISP LCS). An LCS profilehas to be assigned for the services CREL, CUNREL and PLMNOPR.

58 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-191 Modify list of clients for location service (non call related class)

1a Add clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=CUNREL, CLNT=<clients to be added>

1b Delete clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=CUNREL , CLNT=<clients to be deleted>

A50016-D1721-Q503-1-7619 59

OperationSubscriber



TS-192 Modify list of client types for location service (PLMN operator class)

1a Add client types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVusing: MSIN, GCSERV=PLMNOPR, CLNTYPE=<client types to be added>

1b Delete client types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERVusing: MSIN, GCSERV=PLMNOPR , CLNTYPE=<client types to be deleted>

60 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-200 Create templates for mobile subscribers

An operable template has already been defined by using the MML command CR MSUB in the form specified inStep 1. The further steps are optional.

1 Create a template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBusing: MSIN=<reference msin>, MSUBTYP=TEMPLATE, BSNBC. The following pa-rameters can also be entered: MSCAT, SUBRES, PIC, BAOC, BAIC, BAROAM,BAPRC, BASPH, BAGPRS, BASSM, CHRG, EXPIRY, TOSM, OR. For all parame-ter values which are not expressly defined, the associated standard values arestored and are also transferred into the data records of the mobile subscribers cre-ated with the aid of the template. If a date is given for EXPIRY, the template as wellas the subscribers created with the template expire at the given date.

2 Enter the supplementary service call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-260

3 Enter the supplementary service call barring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-265

4 Enter general call services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVFor the services call transfer and multiparty, the service call hold must be entered atthe same time.

5 Enter the service subscriber-related routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERV

6 Enter PDP context records for GPRS subscribers. . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GPRSERV

7 Enter regional roaming restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR RSSERV

8 Assignment of CAMEL services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERV

9 Enter a project specific supplementary feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR MSUBFTusing: MSIN, MSUBFT=<msubftxx> [– <supplementarydata>])

All other services and features must be individually input for the mobile subscriber.

A50016-D1721-Q503-1-7619 61

OperationSubscriber



TS-201 Modify templates for mobile subscribers

This task only illustrates a selection of possible changes. In principle, templates should be modified in the sameway as the equivalent changes to mobile subscribers. The available tasks are listed in full in the relevant sectionsin the Task List.

Changes to a template don’t affect already created subscribers.

1 Change category, subscription, preferred interexchange carrier, expiry date,operator-determined barring, transfer option for SMS, optimal routing orgeneral charging characteristics for GPRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUB

2 Enter an administrative block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: BAOC=OC, BAIC=IC

3 Cancel an administrative block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBusing: BAOC=NONE, BAIC=none

4 Enter the authorization for call forwarding services . . . . . . . . . . . . . . . . . . . . . . . . . . TS-260

5 Enter data for call forwarding services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CFSERV

6 Cancel the authorization for call forwarding services . . . . . . . . . . . . . . . . . . . . . . . . . CAN CFSERV

7 Enter traffic restriction services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-265

8 Enter or change data for traffic restriction services . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CBSERV

9 Cancel traffic restriction services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN CBSERV

10 Enter the authorization for subscriber-related routing. . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERV

11 Cancel the authorization for subscriber-related routing . . . . . . . . . . . . . . . . . . . . . . . CAN OPRSERV

12 Enter General call services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GCSERVFor the services call transfer and multiparty, the service call hold must be assigned.

13 Cancel General call services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GCSERV

14 Enter PDP context records for GPRS subscribers . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GPRSERV

15 Cancel PDP context records for GPRS subscribers . . . . . . . . . . . . . . . . . . . . . . . . . . CAN GPRSERV

16 Enter regional roaming restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR RSSERV

17 Cancel regional roaming restrictions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN RSSERV

18 Assignment of CAMEL services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERV

19 Cancel the assignment of CAMEL services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN OPRSERV

20 Enter a project specific supplementary feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR MSUBFT

21 Cancel a project specific supplementary feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAN MSUBFT

62 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-210 Create a mobile subscriber with single numbering in the HLR

1 Create a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBusing: MSIN, BSNBC [, NDC] [, NUMTYP=SINGLE] [, REFMSIN]

Notes:• NDC:

The parameter NDC must be input if a number of NDCs are permitted in the PLMN• NUMTYP=SINGLE:

The parameter NUMTYP must be input if the multinumbering feature is activated in the HLR since, in this case,the standard value for NUMTYP is ”MULTI”.

• REFMSIN:You can use a template for the creation of the subscriber and specify the template by this parameter.

A50016-D1721-Q503-1-7619 63

OperationSubscriber



TS-211 Create mobile subscriber with multinumbering in the HLR

A mobile subscriber can only be created with multinumbering if the ”multinumbering” feature is activated in theHLR.

1 Check whether a bearer capability information element (BCIE) has beencreated for those services that need it (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . DISP GSMBCIENote: The use of BCIE is not essential, but possible, for services that do not allowmobile terminating calls (MTC).

2 Create the missing bearer capability information elements (if required). . . . . . . . . . . CR GSMBCIE

3 Create a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBusing: MSIN, BSNBC [, NDC] [, REFMSIN]

Notes:• NDC:

The parameter NDC must be input if a number of NDCs are permitted in the PLMN• REFMSIN:

You can use a template for the creation of the subscriber and specify the template by this parameter.

64 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-220 Create a “GPRS only” subscriber in the HLR – single numbering

1 Create a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBusing: MSIN, BSNBC=GPRS... [, NDC] [, NUMTYP=SINGLE]

Notes:• BSNBC:

The basic services GPRS, TS21GPRS and TS22GPRS are allowed for a “GPRS only” subscriber.• NDC:

The parameter NDC must be input if a number of NDCs are permitted in the PLMN.• NUMTYP=SINGLE:

The parameter NUMTYP must be input if the multinumbering feature is activated in the HLR since, in this case,the standard value for NUMTYP is ”MULTI”.

A50016-D1721-Q503-1-7619 65

OperationSubscriber



TS-221 Create a “GPRS only” subscriber in the HLR – multinumbering

1 Create a mobile subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR MSUBusing: MSIN, BSNBC=GPRS... [, NDC]

Notes:• BSNBC:

The basic services GPRS, TS21GPRS and TS22GPRS are allowed for a “GPRS only” subscriber.• NDC:

The parameter NDC must be input if a number of NDCs are permitted in the PLMN.

66 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-260 Enter supplementary service call forwarding

1 If forwarded-to numbers in “unknown” format are to be used:assign CAMEL service for translation of forwarded-to numbers (if required) . . . . . . TS-263

2a Enter call forwarding by default (immediate activation) . . . . . . . . . . . . . . . . . . . . . . . ENTR CFSERVusing: MSIN, CFSERV=CFD, REPCF, SERVAV, BSFTNO

2b Enter other call forwarding service (immediate activation) . . . . . . . . . . . . . . . . . . . . ENTR CFSERVusing: MSIN, CFSERV, BSFTNO [, RCTIM]

2c Enter other call forwarding service (registration only, enter FTNO now) . . . . . . . . . . ENTR CFSERVusing: MSIN, CFSERV, STATUS=REG [, RCTIM], BSFTNO

2d Enter other call forwarding service (registration only, enter FTNO later) . . . . . . . . . . ENTR CFSERVusing: MSIN, CFSERV

Notes:• RCTIM:

This parameter can be entered together with CFSERV=CFNREPLY only. It is also used if “CF on no reply” wasentered by CFSERV=ALLCF, CFD or ALLCFCON. If no value is specified for the timer, the (project-specific)default value is assumed.

• REPCF:For this parameter any combination of the values CFNREACH, CFNREPLY and CFBUSY is allowed. The pa-rameter RCTIM cannot be defined separately for CFD. The same value as for CFNREPLY is used in case of“CFD on no reply”.

• CFSERV=CFD:The parameter RCTIM cannot be defined separately for CFD. The same value as for CFNREPLY is used incase of “CFD on no reply”.

• Mobile subscriber templateWhen the supplementary service call forwarding is used in a template for creating mobile subscribers in theHLR, the hexadecimal digit “E” can be used as a place holder for the basic SN (SN contained in the basicMSISDN). As soon as the data record is used for an actual mobile subscriber, “E” is replaced by the currentSN. The place holder “E” cannot be used for forwarded-to numbers in unknown format.

A50016-D1721-Q503-1-7619 67

OperationSubscriber



TS-261 Activate supplementary service call forwarding

It is assumed that the mobile subscriber already has authorization for the supplementary service. If forwarded-tonumbers in unknown format are to be used, a subscription for the corresponding CAMEL service is also required.

1 Check whether the forwarded-to number has already been entered . . . . . . . . . . . . . DISP MSUBusing: MSIN, DATAKD=ALLDATA

2 Activate call forwarding service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR CFSERVusing: MSIN, STATUS=ACT, BSFTNO=<bsvg>–<dn>[-UNKNOWN] [, RCTIM], CF-SERV

Notes:• RCTIM:

This parameter is only of significance in connection with activation of ”call forwarding on no reply” (i.e. CF-SERV= ALLCF or ALLCFCON or CFNREPLY). If no value is specified for RCTIM, either the value specifiedon registration or the (project-specific) default value is assumed.

• <dn>:If the forwarded-to number has already been entered, the <dn> can be omitted.

• UNKNOWN:For forwarded-to numbers in unknown format only.

68 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-262 Deactivate call forwarding service

1a Deactivate call forwarding service and keep forwarded-to number . . . . . . . . . . . . . . CAN CFSERVusing: MSIN, CFSERV, BSVG, STATUS=ACTAfter execution of this command, the service has the status ”registered”(STATUS=REG). The service can be reactivated later without specifying theforwarded-to number again.

1b Deactivate call forwarding service and cancel forwarded-to number. . . . . . . . . . . . . CAN CFSERVusing: MSIN, CFSERV, BSVG

The service “call forwarding by default” cannot be deactivated.

A50016-D1721-Q503-1-7619 69

OperationSubscriber



TS-263 Assign IN service for translation of forwarded-to numbers in unknown format

1 Assign translation indication flag (TIF-CSI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVusing: MSIN, OPRSERV=TIFCSI[–X–<CSI state>[–<CSI notification>]]

2a Assign originating CAMEL service (O-CSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVusing: MSIN, OPRSERV=OCSI-<name>[–<CSI state>[–<CSI notification>]]

2b Assign originating CAMEL dialed service (D-CSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERVusing: MSIN, OPRSERV=DCSI-<name>[–<CSI state>[–<CSI notification>]]

70 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-265 Enter supplementary service call barring

1a Enter call barring service and allow control by subscriber controlled input . . . . . . . . ENTR CBSERVusing: MSIN, CBSERV, CCB=SUB [, PW] [, BSVG]

1b Enter call barring service without control by subscriber controlled input . . . . . . . . . . ENTR CBSERVusing: MSIN, CBSERV [, BSVG]

Notes:• BSVG:

If this parameter is entered, the service is activated immediately.• PW:

If no value is specified for the password, the default value 0000 is assumed. It can be modified by subscribercontrolled input or by the system operator.

A50016-D1721-Q503-1-7619 71

OperationSubscriber



TS-300 Create “GPRS only” subscriber in the HLR

1 Check whether the mobile subscriber has been created in the AC . . . . . . . . . . . . . . DISP ACMSUB

2 Create mobile subscriber in the AC (if required). . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR ACMSUB

3 Check whether the MSIN and SN to be used for the mobile subscriberare still free (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBThis command must be entered once for the MSIN and for each SN.

4a Create “GPRS only” subscriber with single numbering. . . . . . . . . . . . . . . . . . . . . . . . TS-220

4b Create “GPRS only” subscriber with multinumbering . . . . . . . . . . . . . . . . . . . . . . . . . TS-221

5 Check whether the “quality of service profiles” that are to be assignedto the subscriber are already existing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP QOSPROF

6 Create quality of service profiles (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR QOSPROF

7 Enter PDP context records for the subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GPRSERVNote: Each PDP context record includes a link to a quality of service profile.

72 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-301 Enter prepayment of charges for access to the packet-switched domain (stan-dardized solution)

By this task you create and assign CAMEL services for charging of GPRS and SMS-MO. Depending on the par-ticular subscriber not all services may be required.

1 Check whether the required CAMEL services have already been created . . . . . . . . DISP SUBRSERV

2 Create a CAMEL service for charging of GPRS (if required). . . . . . . . . . . . . . . . . . . CR SUBRSERVusing: OPRSERV=GPRSCSI, REPHNDL=PDPCNA, DEFCALL=RELEASE

3 Create a CAMEL service for charging of SMS-MO (if required) . . . . . . . . . . . . . . . . CR SUBRSERVusing: OPRSERV=SMSCSI, REPHNDL=TS22NA-TS22NA, DEFCALL=RELEASE

4 Assign the CAMEL services to the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR OPRSERV

Depending on the project it may also be necessary to adapt the general charging characteristics of the subscriber(MOD MSUB) and the charging characteristics per PDP context record (ENTR GPRSERV).

A50016-D1721-Q503-1-7619 73

OperationSubscriber



TS-305 Enter prepayment of charges

1a Enter prepayment of charges for access to the circuit-switched domain . . . . . . . . . . TS-121

1b Enter prepayment of charges for access to the packet-switched domain(standardized solution) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-301

1c Enter prepayment of charges for access to the packet-switched domain(proprietary solution) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GPRSERVusing: PDPREC=PDPREC5, PDPADR=X25 - <X.25 address of the CSE>Depending on the project it may also be necessary to adapt the general chargingcharacteristics of the subscriber (MOD MSUB) and the charging characteristics perPDP context record (ENTR GPRSERV).

74 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-306 Cancel prepayment of charges

1a Cancel prepayment of charges for the circuit-switched domain . . . . . . . . . . . . . . . . CAN OPRSERV

1b Cancel prepayment of charges for the packet-switched domain (standardized) . . . . CAN OPRSERV

1c Cancel prepayment of charges for the packet-switched domain (proprietary). . . . . . CAN GPRSERVusing: PDPREC=PDPREC5

Concerning the packet-switched domain: Depending on the project it may also be necessary to adapt the generalcharging characteristics of the subscriber (MOD MSUB) and the charging characteristics per PDP context record(ENTR GPRSERV).

A50016-D1721-Q503-1-7619 75

OperationSubscriber



TS-320 Modify network access mode (NAM) of a subscriber

1a Modify NAM: “GSM only” -> “GSM and GPRS” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-321

1b Modify NAM: “GPRS only” -> “GSM and GPRS” . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-322

1c Modify NAM: “GSM and GPRS” -> “GPRS only” . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-326

1d Modify NAM: “GSM and GPRS” -> “GSM only” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TS-324

If the network access mode of a subscriber is to be modified from “GPRS only” to “GSM only” or vice versa, thesubscriber needs to be canceled and re-created.

76 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-321 Modify network access mode from “GSM only” to “GSM and GPRS”

1 Assign basic services for GPRS to the subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBwith: BSNBC=GPRS [-sn]The SMS services TS21GPRS and TS22GPRS can be assigned additionally.

2 Check whether the “quality of service profiles” that are to be assignedto the subscriber are already existing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP QOSPROF

3 Create “quality of service profiles” (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CR QOSPROF

4 Enter PDP context records for the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENTR GPRSERVNote: Each PDP context record includes a link to a quality of service profile.

A50016-D1721-Q503-1-7619 77

OperationSubscriber



TS-322 Modify network access mode from “GPRS only” to “GSM and GPRS”

1 Assign basic services other than GPRS, TS21GPRS and TS22GPRSto the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MOD MSUBwith: BSNBC=bsv [-sn]

The subscriber is now allowed to use both the circuit-switched and the packet-switched domain. If required, addi-tional tasks have to be executed to assign supplementary services to the subscriber.

78 A50016-D1721-Q503-1-7619


OperationSubscriber


TS-324 Modify network access mode from “GSM and GPRS” to “GSM only”

1 Note the basic services of the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: DATAKD=ALLDATA

2 Note the SGSN ISDN of the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: DATAKD=MOBDATA

3 Cancel the services GPRS, TS21GPRS and TS22GPRS if assigned. . . . . . . . . . . . MOD MSUBwith: CBSNBC=GPRS [-sn1] [&TS21GPRS [-sn2]] [&TS22GPRS [-sn3]]By this command the PDP context records of the subscriber and subscriptions toCAMEL services for GPRS are also deleted. The subscriber entry in the SGSN iscanceled. If the subscriber is not canceled in the SGSN because the entity is notreachable, a message is displayed. In this case the subscriber has to be canceledby an additional MML command when the SGSN is reachable again (see TS-117).The SGSN ISDN number has to be determined before modification in the HLR, seetask number 2.

A50016-D1721-Q503-1-7619 79

OperationSubscriber



TS-326 Modify network access mode from “GSM and GPRS” to “GPRS only”

1 Check the basic services of the subscriber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: DATAKD=GENRDATA

2 Note the VLR ISDN of the subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISP MSUBusing: DATAKD=MOBDATA

3 Cancel all basic services except GPRS, TS21GPRS and TS22GPRS . . . . . . . . . . . MOD MSUBwith: CBSNBCThis command cancels also all services which are only allowed for GSM subscribersbut not for GPRS subscribers (e.g. call forwarding) and the subscriber entry in theVLR.If a subscriber is not canceled in the VLR because the entity is not reachable, a mes-sage is displayed. In this case the subscriber has to be canceled by an additionalMML command when the VLR is reachable again (see TS-117). The VLR ISDN num-ber has to be determined before modification in the HLR, see task number 2.

Operation - · PDF fileOMN-SU:HLRi:MML Operation Subscriber 1 Introduction (IN) ... •...

Documents

Transcript of Operation - · PDF fileOMN-SU:HLRi:MML Operation Subscriber 1 Introduction (IN) ... •...