Operating Instructions Vented Dryer T 1576

Operating InstructionsVented DryerT 1576

To prevent accidentsand machine damageread these instructionsbefore installation or use.

U

M.-Nr. 05 658 821

IMPORTANT SAFETY INSTRUCTIONSGuide to the dryerBefore loading the dryerUsing the dryer1. Turn on the dryer and load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82. Select a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9ProgramsDrying options3. Select a drying option (if needed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Low energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Turbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Gentle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Using the dryer4. Start the program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125. At the end of a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Adding or removing laundry during a program. . . . . . . . . . . . . . . . . . . . . . . . . . . 13Safety lockDryer careCleaning the lint filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Power failure - Emergency door release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Frequently asked questionsQuick GuideQuick GuideAfter Sales ServicePC Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19IMPORTANT SAFETY INSTRUCTIONSINSTALLATION INSTRUCTIONSDisposal of the packing materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Disposal of an old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Level the dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Connect the ducting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Make the electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Contents

2

,WARNING - To reduce the risk offire, electric shock, or injury whenusing your appliance, follow basicprecautions, including the following:

Read all instructions before usingthe appliance.

Do not dry articles that have beenpreviously cleaned, washed,

soaked in, or spotted with gasoline,dry-cleaning solvents, or otherflammable or explosive substances.They give off vapors that could ignite orexplode.

Do not allow children to play on orin the appliance. Close supervision

is necessary when the appliance isused near children. Always close thedoor after use to prevent child hazards.

Before this appliance is removedfrom service or discarded remove

the door to the drying compartment.

Do not reach into the dryer if thedrum is moving.

Do not install or store thisappliance where it will be exposed

to the weather.

Do not tamperwith the controls.

Do not use fabric softener sheetsto eliminate static in the dryer. Best

results occur when a liquid softener isused in the washing machine.

Do not use heat to dry articlescontaining foam rubber or similarly

textured rubber-like materials and itemscontaining, hairspray, nail polishremover or similar substances.

Clean the lint filter before or aftereach load.

Keep the area around the air intake(toekick) and adjacent surrounding

areas free from lint, dust and dirt.

The interior of the machine andexhaust duct should be cleaned

periodically by qualified personnel.

Do not place items exposed to oilsin your dryer. Items contaminated

with oils may contribute to a chemicalreaction that could cause the laundry tocatch fire.

IMPORTANT SAFETY INSTRUCTIONS

3

Do not repair or replace any part ofthe appliance or attempt any

servicing unless specificallyrecommended in these OperatingInstructions. Repairs to electricalappliances should only be performedby qualified personnel. Incorrectlyrepaired machines may pose aconsiderable risk to the user.

GROUNDING INSTRUCTIONSThis appliance must be grounded.

In the event of malfunction orbreakdown, grounding will reduce therisk of electric shock by providing apath of least resistance for electriccurrent. This appliance is equippedwith a cord having an equipmentgrounding conductor and a groundingplug. The plug must be plugged into anappropriate outlet that is properlyinstalled and grounded in accordancewith all local codes and ordinances.

WARNING – Improper connectionof the equipment grounding

conductor can result in a risk of electricshock. Check with a qualifiedelectrician or service representative orpersonnel if you are in doubt as towhether the appliance is properlygrounded.

Do not modify the plug providedwith the appliance: if it will not fit

the outlet, have a proper outlet installedby a qualified electrician.

SAVE THESE INSTRUCTIONS

This dryer is intended forresidential use only!


4

1 Power cord with plug

2 Control panel

3 Door

4 Exhaust connection (left or rear)

5 Four height adjustable screw feet

Guide to the dryer

5

Control panel

a "On/Off" button

Turns the machine on and off orcancels a program. If the dryer isturned on the drum interior will lightwhen the door is opened.

b "Door" button

Opens the door or can be used tocancel a program.

c "START" button

Begins the selected program.The indicator:

– flashes when the program can bestarted.

– illuminates once a program hasstarted.

d Drying options

e Program selector

The program selector can be turnedclockwise or counterclockwise.

The light ring goes off:

– if a program is not selected afterturning the machine on or if theprogram was not started.

– a few minutes after the end of aprogram.

f Program sequence display

shows the current cycle of the dryingprogram.

Guide to the dryer

6

The appliance must be correctlyinstalled and connected before thefirst use. Please see the "Installationinstructions".

^ Check the dryer drum for any residuethat may have deposited during themanufacturing process. If necessaryclean out with a cloth.

Before drying, check fabric carelabels for special drying instructions.

q = Dry with normal temperaturer = Dry with low temperature

(select "Gentle" option)s = do not dry in tumble dryer

If no symbol is present:

Dry cottons and permanent presslaundry in their correspondingprograms.

Dry delicate fabrics like polyester, in the"PERMA PRESS" program with the"Gentle" option.

Dry wool and wool blends in the"Woolens" program.

Dry pure linen and down filled items inthe "Line Dry" program.

Drying tips

Knitted fabrics and flannel tend toshrink when washed and dried for thefirst time. Do not over dry these fabrics.

Permanent press and delicate fabricstend to crease.For better drying results reduce theload size and select the "PERMAPRESS/Hand iron" program.

To prevent discoloration, do not drynew dark-colored fabrics withlight-colored items.

Do not overload the drum!Overloading the dryer will result in poordrying and wrinkling.

Close zippers and tie up fabric beltsand apron ties.

Do not dry items that may melt or ignitein the dryer such as plastics, rubber orsneakers.

Before loading the dryer

7

1. Turn on the dryer and loadthe laundry^ Press the "On/Off" button to turn on

the dryer.

^ Press the "Door" button to open thedoor.

^ Load the laundry loosely into thedrum.

^ Close the door with a firm swing - donot push it shut.

Do not use fabric softener sheets inthis dryer. Silicates contained inthese sheets could cause the dryerto overheat. To prevent fabric damage, check

that laundry will not be caught in theclosed door.

Using the dryer

8

2. Select a program

^ Turn the program selector clockwiseor counterclockwise to the desiredprogram.

Please refer to the "Programs" chart.

Using the dryer

9

Program Fabric Note

COTTONS

Extra dry For drying laundry that will bestored away, such as linens orseasonal clothing.

The "Extra dry" program shouldnot be selected for jerseymaterials. Items may shrink.

Normal+ Uniform loads of cotton e.g.sheets, underwear, socks.

-

Normal Knitted cotton fabrics that mayshrink, e.g. jersey material orlightweight cottons.

If items are still damp, redryusing "Normal+".

Hand iron r Cotton or linen fabrics to beleft damp for easier ironing.

-

Hand iron rr If fabrics are too damp forironing, redry using "Hand ironr".

Rotary iron Cotton or linen fabrics, whichwill be ironed with a rotary iron.

To prevent moisture loss, roll upthe laundry until ironing.

PERMA PRESS

Normal+ Permanent press items.

Normal Permanent press and blendedfabrics made of blendedwoven or knitted fabrics, e.g.cotton/synthetic.

Hand iron Permanent press and blendedfabrics, requiring an ironedfinish.

Reduce load size for fabrics thatwrinkle easily.

TIMED CYCLES

20 mins. Individual items or very smallloads.

-

Fluff Individual items to befreshened and fluffed with coolair.

-

Special programs

Woolens Wool and wool blend fabrics Take items out immediately afterthe end of the program while stillslightly damp. Allow items to airdry.

Line Dry Program for reducing creasingcotton, linen or permanentpress fabrics made of cotton,blends or synthetics.

Programs

10

3. Select a drying option(if needed)

^ Select the option before starting aprogram by pressing the respectivebutton.

Indicator light:

on = dry option selected

off = dry option not selected

Some drying options are not availablein all programs. The dryer will not allowyou to choose an option that will conflictwith the selected program.

Low energyFor drying temperature sensitivefabrics.

The program running time will beextend.

TurboFast drying for sturdy fabrics withincreased temperature and air flow.

Do not dry delicate fabrics with thisoption.

GentleFor drying delicate fabrics at a lowertemperature and extended time.

BuzzerA tone will sound at the end of aprogram.

The volume of the buzzer can beadjusted:

1. Select a program.

2. Press the "Buzzer" button, until youhear the desired volume.

3. Release the "Buzzer" button to set thevolume. Start the program.

Drying options

11

4. Start the program

^ Press the "START" button.

5. At the end of a programThe "Anti-crease/End" indicator will lightat the end of a program.

^ Turn the program selector to "Finish".


^ Remove the laundry.

^ Check that the drum is empty.

^ Clean the lint filter after each use(see "Cleaning and care".)

^ Press the "On/Off" button to turn offthe dryer.

Using the dryer

12

Changing a programOnce a drying program has started,changes to the program and anyselected drying options can only bemade by cancelling the currentprogram.

To cancel the current program:

^ Turn the program selector to "End".

When the program has been canceledthe "Anti-crease/End" indicator lights.

^ Turn the program selector eitherclockwise or counterclockwise to thenew program.

^ Select any desired drying options.

^ Press "START".

Adding or removing laundryduring a program^ Press the "Door" button.

Once the door pops open, laundry canbe added or removed.

^ Close the door and press "START" tocontinue drying.

Using the dryer

13

Child safety lockWhen activated, the safety lockprevents the dryer from being operatedby locking the control panel functions.

To activate the child safety lock

1. Close the door and turn the programselector to "End".

2. Turn on the dryer using the "On/Off"button.

3. Press and hold the "Turbo" buttonwhile performing steps 4. to 6.

4. Turn the program selector slowlystep by step clockwise to"COTTONS/Normal".

5. Turn the program selector slowlystep by step counterclockwise to"End".

6. Turn the program selector slowlystep by step counterclockwise to"PERMA PRESS/Hand iron".

The "Locked" indicator will flash.

7. Release the "Turbo" button.

The child safety lock function is nowactivated.

8. Turn off the machine using the"On/Off" button.

To deactivate the child safety lock

^ Repeat steps 1 to 7.

The "Locked" indicator will go out afterstep 6.

Safety lock

14

Cleaning the lint filter

The lint filter must be cleaned beforeor after every program.

^ Open the door and remove the lintfilter.

^ Wipe the lint off the filter with yourhand, do not use any sharp objects!

^ Any lint remaining in the hollow partof the door can be removed throughthe gap at the bottom with a dustbrush or vacuum.

^ Return the lint filter and close thedoor.

The lint filter can be rinsed with hotwater if necessary.

^ Dry the lint filter before putting it backin place.

Before cleaning the tumble dryer,disconnect the machine from thepower supply.Never use abrasive cleaners,scouring pads, steel wool or caustic(oven) cleaners on the dryer. Theywill damage the surface.

Cleaning the exterior and thecontrol panel^ The exterior and the control panel

can be cleaned with warm water andliquid dish soap applied with a softsponge.

^ Wipe dry using a soft cloth.

Cleaning the drum andstainless steel parts^ Stainless steel surfaces can be

cleaned using a non-abrasivestainless steel cleaner.

^ Wipe dry using a soft cloth.

Dryer care

15

Changing the light bulb

,WARNINGTo reduce the risk of electric shock,disconnect this appliance from thepower supply by unplugging ortripping the circuit breaker.

^ Unscrew the plastic bulb coverlocated inside the drum and abovethe door (see illustration.)

^ Replace the light bulb with atemperature proof bulb (part # 02150 900) available from Miele’sTechnical Service Department.

The light bulb must not exceed themaximum wattage quoted on thedata plate.

^ Refit the plastic bulb cover.

Take care that the bulb cover istightened into place. Otherwisemoisture may penetrate the socketand cause a short circuit.

Power failure - Emergencydoor release

^ Pull forward on the unhinged side ofthe door.

Dryer care

16

With the following guide, minor problems can be fixed without a service call.

What if . . . Possible fault Fix

. . . the dryer fails tostart when turned on?

If the "On" indicator islit you may not haveselected the programproperly.

Reselect the program in thecorrect sequence, see"Using the dryer".

If the "On" indicator is notlit, check that:

– The "ON/OFF" button ispressed in.

– The door is properlyclosed.

– The machine is pluggedin and the fuse or circuitbreaker has not tripped.

. . . the laundry hasstatic cling?

Add fabric softener to thefinal rinse of the wash toreduce static cling.

. . . the laundry is notdry enough?

Select a more intensiveprogram or the "Turbo"option.

. . . the program runstoo long?

The air supply isinsufficient.

Open a window or door toincrease air flow.

The air can not bevented properly.

– Clean the lint filter.

– Check and clean theexhaust vent for clogs.

The laundry was notspun sufficiently in thewasher.

Spin laundry thoroughlybefore drying.

. . . the light ring doesnot light?

A program was notselected or the selectedprogram has ended.

Select a program.

. . . the drum light doesnot come on?

The bulb may be bad orburned out.

Change the light bulb. See"Cleaning and care".

Frequently asked questions

17

What if . . . Possible fault Fix

. . . the "Locked"indicator flashes afterturning the dryer on?

The child safety lock isactivated.

Deactivate the safetylock. See "Child safetylock".

. . . the "Locked"indicator lights duringdrying?

This is not a fault. It will go off after theprogram has finished.

. . . the "Drying"indicator flashes?

The program selector wasmoved after the start ofthe program. This will notaffect the program.

Turn the program selectorback to the originalsetting. The indicator lightwill go out.

. . . the "Anti-crease /End" indicator flashes?

There may be a technicalfault.

– Turn the dryer off andon.

– Select and start theprogram.

– If the indicator stillflashes, there is atechnical fault. Call theMiele Technical ServiceDepartment.

Freezing temperaturesmay affect the dryer.

– Install the dryer in awarmer room.

. . . the program stoppedand the "Anti-crease/End" indicator is lit?

Dry laundry or a singleitem will cause the dryerto stop.

Single items should bedried with a "Timed cycle"program.

Frequently asked questions

18

Quick GuideRemove this guide for easy reference

Please read allinstructions, especiallythe "Important Safety Instructions",before using the dryer.

1. Turn on the dryer and load thelaundry.

^ Press the "On/Off" button to turn onthe dryer.


^ Load the laundry into the drum. Makesure that there is enough space in thedrum for clothes to tumble freely.

To prevent fabric damage, checkthat laundry will not be caught in theclosed door.

^ Close the door with a firm swing - donot push it shut.

2. Select a program

^ Turn the program selector clockwiseor counterclockwise to the desiredprogram.

Quick Guide

3. Select a drying option (if needed)

^ Press the button of the drying optionyou would like to select.

4. Start the program

^ Press "START".

5. At the end of a program

The "Anti-crease / End" indicator willlight.

^ Turn the program selector to "End".

^ Press "Door" and remove the laundry.

^ Clean the lint filter.

^ Press the "On/Off" button to turn offthe dryer.

Quick Guide

Program Fabric NoteCOTTONSExtra dry Multi-layer fabrics, mixed loads

of sturdy cottons, e.g. jeans,towels.

The "Extra dry" program shouldnot be selected for jerseymaterials. Items may shrink.

Normal+ Uniform loads of cotton e.g.sheets, underwear, socks.

-

Normal Knitted cotton fabrics that mayshrink, e.g. jersey material orlightweight cottons.

If items are still damp, redryusing "Normal+".

Hand iron r Cotton or linen fabrics to beleft damp for ironing.

-Hand iron rr If fabrics are too damp for

ironing, redry using "Hand ironr".

Rotary iron Cotton or linen fabrics, whichwill be ironed with a rotary iron.

To prevent moisture loss, roll upthe laundry until ironing.

PERMA PRESSNormal+ Synthetic permanent press

items made.Normal Permanent press and blended

fabrics made of blendedwoven or knitted fabrics, e.g.cotton/synthetic.

Hand iron Permanent press and blendedfabrics, requiring an ironed finish.

Reduce load size for fabrics thatwrinkle easily.

TIMED CYCLES20 mins. Individual items or very small

loads.-

Fluff Individual items to befreshened and fluffed with coolair.

-

Special programsWoolens Wool and wool blend fabrics Take items out immediately after

the end of the program while stillslightly damp. Allow items to airdry.

Line Dry Program for reducing creasing cotton, linen or permanent pressfabrics made of cotton, blends or synthetics.

Quick Guide

In the event of a problem which youcannot fix yourself, or to order spareparts please contact:

– Your Miele Dealer

or

– The Miele Technical ServiceDepartment

USA [email protected]

CDN [email protected]

When contacting the Technical ServiceDepartment, please quote the modeland serial number of your appliance.They can be found on the data platelocated below the drum opening.

PC UpdateThe indicator marked PC allows atechnician to update the dryer to makeuse of new technology.

For example, if new programs or fabricsare developed, a service technician willbe able to modify the existing programcycles accordingly.

After Sales Service

19

INSTALLATION INSTRUCTIONS

Installation, repair and mainten-ance work should be performed by

a Miele authorized service technician.Work by unqualified persons could bedangerous and could void the warranty.

Before installation, disconnect thetumble dryer from the electrical

supply by shutting off the power main,unplugging the power cord or trippingthe circuit breaker. Do not restorepower until the installation is complete.

GROUNDING INSTRUCTIONSThis appliance must be grounded.

In the event of malfunction orbreakdown, grounding will reduce therisk of electric shock by providing apath of least resistance for electriccurrent. This appliance is equippedwith a cord having an equipmentgrounding conductor and a groundingplug. The plug must be inserted into anappropriate outlet that is properlyinstalled and grounded in accordancewith all local codes and ordinances.

WARNING – Improper connectionof the equipment grounding

conductor can result in a risk of electricshock. Check with a qualifiedelectrician or service representative orpersonnel if you are in doubt as towhether the appliance is properlygrounded.

Do not modify the plug providedwith the appliance! If it will not fit

the outlet, have a proper outlet installedby a qualified electrician.

This dryer must be ventedoutdoors. Observe local building

codes.

Install the venting in such a waythat the expelled air cannot be

drawn back into the machine.

Do not vent the dryer into achimney used by gas, fuel boilers,

heaters, a fireplace chimney, a wall, aceiling or a concealed space of abuilding.

If there is any doubt concerninginstallation, contact Miele’s

Technical Service Department.

U [email protected]

V [email protected]


22

Disposal of the packingmaterialsThe cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable.

To prevent suffocation ensure that anyplastic wrappings, bags etc. aredisposed of safely and kept out of thereach of children.

Please recycle.

Disposal of an old applianceOld appliances may contain materialsthat can be recycled. Please contactyour local recycling authority about thepossibilty of recycling these materials.

Ensure that the appliance presents nodanger to children while being storedfor disposal. Before discarding an oldappliance, unplug it from the outlet andcut off its power cord and remove anydoors to prevent hazards.


23

Level the dryer

The dryer must be level to ensure safeand proper operation. Minordiscrepancies do not, however, have anadverse effect on operation.

^ The machine can be leveled byturning the legs clockwise orcounterclockwise as necessary.

An air flow gap of 3/8 " (10 mm) mustbe provided between the machineand the floor. This air flow gap mustnot be blocked by a toekick or thickpiled carpets.

The tumble dryer can also be placedon top of a Miele washing machine for astacked installation. An appropriatestacking kit is required.

The stacking kit, part # 12 996 026, isavailable from your Miele dealer or theMiele Technical Service Department.


24

Installation tips– For best drying results, avoid extra

long ducting with too many bends orangles. Avoid ducting in tightcorners.

– Use flexible metal pipe or rigid metalpipe for venting. Non-metallic flexiblehose should not be used since it is apotential fire hazard.

– The shorter the exhaust ductwork,the more efficient the dryer will be.Expelled air is slowed down in theducts due to friction against the innerwalls. The shorter and smoother theinner walls are, the less friction thatwill be created.An elbow or bend creates morefriction than a straight duct. Anadditional duct length factor musttherefore be added for each elbow orbend (see Table 1.) This factorexpresses the restistance of thebend in terms of a straight length ofduct.The additional length factor is thenadded to the measured duct lengthto give the effective duct length.A larger duct diameter helps toreduce friction. The duct diametershould therefore be increased withincreasing duct length.


25

Calculate the effective ductlengthThe overall duct length will determinethe duct diameter.

^ Measure the actual duct lengthneeded:

1. Establish the number of elbows orbends necessary, noting the type ofbend, angle and radius involved(see, Table 1).

2. Add the additional duct length asspecified in Table 1 to the actualduct length to get the effective ductlength.

3. The necessary duct diameter canthen be found in Table 2.

Note:

Drying times and energy consumptionremain unaltered for 4" (100 mm) ductup to a total length of 66 ft. (20 m).Longer ducts may lead to slightincreases, but, the function will not beimpaired as long as the necessary ductdiameter is used (Table 2).

Table 1

Typeof bend

Angle Radius Additionalduct length

inch cm inch cm

Flexiblemetal duct

90 °

45 °

up to16"

up to16"

40.6

40.6

20"

12"

50.8

30.5

Smoothmetal duct

90 ° 4" 10 14" 35.6

Elbow 90°sharp;no radius

90 ° 90" 228.5

Concertinabend

90 ° 8" 20.3 28" 71.1

Wall vent kitwith louvresorwindowvent kit

142" 360.7

Wall vent kitwith flap orwindowvent kit

99" 251.5

Exhaustconnectionleft side

193" 490.2

Table 2

Internal diameter oredge length

Effective ductlength

inches mm ft m

4"5"6"

100125150

0 - 6666 - 100100 - 140

0 - 2020 - 30

30 - 42.7


26

Flexible metal ducting has been usedfor the following example. Other ducttypes may require additional ductlength (see Table 1.)

Example:Vent connection left . . . . . . . 39" (1.0 m)Length (L). . . . . . . . . . . . . . . 47" (1.2 m)Lower radius (R). . . . . . . . . . 19" (0.5 m)Height (H). . . . . . . . . . . . . . . 39" (1.0 m)Upper radius (R) . . . . . . . . . 19" (0.5 m)Wall pipe w/ grill frame. . . . 149" (3.8 m)

Effective duct length . . . . 312" (8.00 m)

Result:

A duct diameter of 4" (100 mm) isadequate since the effective length isless than 66 ft. (20 m) as specified inTable 2.


27

Wall vent duct

1. Louvred wall vent frame

2. Wall vent duct

3. Adapter

4. Louvred wall vent

5. Flap

6. Screw

Dryer top view

1. Wall pipe

2. Flexible foam gasket

A flexible foam gasket must be used ifthe tumble dryer is directly connectedto the wall vent.

inch cm

4 1/4" 10.8

4" 10

23 1/2" 60

28 1/2" 72.5


28

Example 1

Connection of the rigid metal pipe tothe dryer (side view).

1. KA-pipe2. Adapter

Example 2

Height of vent adapter in a stackedinstallation.

Connect the ducting^ Attach the ducting to the vent.

^ Move the dryer close to its finalposition.

^ Attach the ducting to the exhaust portvia the duct adapter, securing withduct tape or a hose clamp.

inch cm

4 3/4" 12

22 5/8" 57.5

27 1/2" 70

36 1/4" 92

66 1/8" 168


29

To change the exhaust connectionfrom the rear of the machine to theleft side of the machine

^ Remove the vent socket from the rearexhaust port by inserting a thinscrewdriver into the slot by theretaining clip. Press the clip gentlyupwards and at the same time turnthe connector counterclockwise.

^ Press the retaining clip of the capcovering the left exhaust portupwards, turn it counterclockwise.

^ Secure the connector into the sideport by pressing it in and turning itclockwise.

^ Seal the rear exhaust port with thecap.


30

Make the electrical connection

GROUNDING INSTRUCTIONSThis appliance must be grounded. Inthe event of malfunction orbreakdown, grounding will reducethe risk of electric shock byproviding a path of least resistancefor electric current. This appliance isequipped with a cord having anequipment grounding conductor anda grounding plug. The plug must beplugged into an appropriate outletthat is properly installed andgrounded in accordance with alllocal codes and ordinances.

WARNING – Improper connection ofthe equipment grounding conductorcan result in a risk of electric shock.Check with a qualified electrician orservice representative or personnelif you are in doubt as to whether theappliance is properly grounded.

Do not modify the plug provided withthe appliance: if it will not fit theoutlet, have a proper outlet installedby a qualified electrician.

Electrical connection

The dryer comes with a 5 ft long, 12/4AWG cord and a NEMA 14-30 P plug.

It should be connected to a120/208-240 V, 15 A, 60 Hz AC powersupply. A 3 pole-4 wire groundingpower outlet (NEMA type 14-30 R) isnecessary.

EASY INSTALLATION KIT

If you do not have a dedicated 15 Ampline for this appliance, but you have thestandard, 120/208-240 V - 30 Amp,60 Hz AC outlet, you can use the "EasyInstallation Kit", which allows you to usethat line to connect this appliance.

057B for on-site outlet NEMA 10-30 R060B for on-site outlet NEMA 14-30 R

For more information on the "EasyInstallation Kit" or if you have questionsconcerning the electrical connectionplease contact:

USA [email protected]

CDN [email protected]


31

Operating Instructions Vented Dryer T 1576

Documents

Transcript of Operating Instructions Vented Dryer T 1576