Open Source Computer Science - University of Illinois ... · PDF fileOpen Source Computer...
Transcript of Open Source Computer Science - University of Illinois ... · PDF fileOpen Source Computer...
Open Source Computer Science
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. General knowledge of computer programming. B. Goal of project exhibit C. Ability to explain decisions made or results
shown D. Self-Evaluation of project E. Appropriate techniques and styles used (ex:
coding practices, user friendliness, documentation)
F. Neat appearance G. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements Overall Comments: (Comments are helpful to the exhibitor; use back if necessary)
Rating:__________
Beginning Programming
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. General knowledge of computer programming. B. Goal of project exhibit C. Ability to explain decisions made or results
shown D. Self-Evaluation of project E. Appropriate techniques and styles used (ex:
coding practices, user friendliness, documentation)
F. Neat appearance G. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements Overall Comments: (Comments are helpful to the exhibitor; use back if necessary)
Rating:__________
Intermediate Programming
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. General knowledge of computer programming. B. Goal of project exhibit C. Ability to explain decisions made or results
shown D. Self-Evaluation of project E. Appropriate techniques and styles used (ex:
coding practices, user friendliness, documentation)
F. Neat appearance G. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements Overall Comments: (Comments are helpful to the exhibitor; use back if necessary)
Rating:__________
Advanced Programming
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. General knowledge of computer programming. B. Goal of project exhibit C. Ability to explain decisions made or results
shown D. Self-Evaluation of project E. Appropriate techniques and styles used (ex:
coding practices, user friendliness, documentation)
F. Neat appearance G. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements Overall Comments: (Comments are helpful to the exhibitor; use back if necessary)
Rating:__________
Website Design
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. General knowledge of website design. B. Goal of project exhibit C. Ability to explain decisions made or results
shown D. Self-Evaluation of project E. Appropriate techniques and styles used F. Neat appearance G. User friendly H. Difficulty for age and years in project
Requirements Yes No A. Follows exhibit requirements Overall Comments: (Comments are helpful to the exhibitor; use back if necessary)
Rating:__________
Computer Innovation Class
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Accurate information B. Well-formed idea/originality C. Goals established D. Exhibit reflects stated goal(s) E. Ability to explain decisions or results shown F. Skills/knowledge gained G. Exhibitor’s ability to identify successes and failures H. Appropriate level of content knowledge demonstrated I. Logical flow to presentation; well-organized J. Eye catching and appealing exhibit K. Appropriate use of photographs, illustrations, design plans, etc. L. Will the viewer learn something?
Requirements Yes No
A. Follows exhibit requirements Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Simple Switch
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Project has simple switch that shows the mechanical action of controlling electricity B. Wire-to-wire connectors properly secured or
soldered onto screw terminals C. Screws and mechanical connection tight D. Battery polarity & color coding of wiring E. Overall neatness F. Does the circuit perform its function? G. Batteries, wires and electrical load size correct H. Project is safe (no short circuits or shocks) I. Basics of electrical current flow and simple
switch concepts presented J. Skills learned & able to identify improvements L. Written explanation clear, neat and explains
parts used in project M. Originality N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Simple Motor
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Any design of a simple electric motor with an electromagnet wound by the exhibitor and rotates in a magnetic field B. Wire connectors properly secured or soldered
onto screw terminals C. Screws and mechanical connections tight D. Does the motor rotate with battery power? E. Overall neatness F. Batteries, wires and electrical lode size correct G. Project is safe (no short circuits or shocks) H. Basic ideas of magnets, electromagnets and
simple motor concepts explained I. Skills learned & able to identify improvement K. Written explanation clear, neat and explains
parts used to make project L. Originality M. Overall Appearance N. Difficulty for age and years in project
Requirements Yes No A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Magnetic Telegraph/Buzzer
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Any design of a battery powered electromagnet wound by exhibitor to work as a telegraph or buzzer B. Wire connectors properly secured or soldered
onto screw terminals C. Screws and mechanical connections tight D. Does the electromagnet perform function? E. Overall neatness F. Batteries, wires and electrical lode size correct G. Project is safe (no short circuits or shocks) H. Basic concepts of magnetism, electromagnets
and electrical flow I. Skills learned & able to identify improvement K. Written explanation clear, neat and explains
parts used to make project L. Originality M. Overall Appearance N. Difficulty for age and years in project
Requirements Yes No A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
DC Circuit Board
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Any design of a battery powered circuit board demonstrating a series circuit or a parallel circuit or both B. Is at least 1 switch used? C. Wiring color codes correct: - dark, + light D. Wire connectors properly secured or soldered
onto screw terminals E. Screws and mechanical connections tight F. Does the circuit board work? G. Overall neatness H. Batteries, wires and electrical lode size correct I. Project is safe (no short circuits or shocks) J. Basic concepts of electrical current flow, series
circuit and/or parallel circuit properties K. Skills learned & able to identify improvement M. Written explanation clear, neat and explains
parts used to make project N. Originality O. Overall Appearance P. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
DC 3-way or 4-way Switch
Circuit Board
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Project should be any design of a battery powered circuit board demonstrating a 3-wa switch or 3-way to 4-way switch, or combination to control power to a DC electrical load or loads B. Wiring color codes correct: - dark, + light C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Does the circuit board work? F. Overall neatness G. Batteries, wires and electrical lode size correct H. Project is safe (no short circuits or shocks) I. Basic concepts of electrical current flow, 3-way
switching, and/or 4-way switches J. Skills learned & able to identify improvement L. Written explanation clear, neat and explains
parts used to make project M. Originality N. Overall Appearance O. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
DC Open Class
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Project has no limitations but should be battery powered B. Wires and devices properly routed & secured C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Device works properly F. Batteries, wires and electrical lode size correct G. Project is safe (no short circuits or shocks) H. Basic concepts of direct current I. Skills learned & able to identify improvement K. Written explanation clear, neat and explains
parts used to make project L. Originality M. Overall Appearance N. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Outdoor Utility Lamp
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Materials and electrical devices rated for outdoor use (waterproof) B. Proper wire size and type for load C. Wires and devices properly routed & secured D. Wire connectors properly secured or soldered
onto screw terminals E. Screws and mechanical connections tight F. Wires in plugs, connector bodies, outlets & switches properly covered (weatherproof/no bare wires) G. Polarization and color coding of wiring correct H. Unit works properly I. Overall neatness J. Electrical and metal components grounded K. Electrical devices U.L. approved L. Exhibit is safe for intended use M. Basic concepts of AC and safe wiring methods N. Skills learned & able to identify improvement P. Written explanation clear, neat and explains
parts used to make project Q. Originality R. Overall Appearance S. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor; use back)
Rating:__________
Indoor Lighting Fixture
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Proper wire size and type for load B. Wires and devices properly routed & secured C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Wires in plugs, connector bodies, outlets & switches properly covered (no bare wires) F. Polarization and color coding of wiring correct G. Unit works properly H. Overall neatness I. Electrical and metal components grounded J. Electrical devices U.L. approved K. Exhibit is safe for intended use L. Basic concepts of AC and safe wiring methods M. Skills learned & able to identify improvement O. Written explanation clear, neat and explains
parts used to make project P. Originality Q. Overall Appearance R. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
AC Motor Driven Device
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Proper wire size and type for load B. Wires and devices properly routed & secured C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Wires in plugs, connector bodies, outlets & switches properly covered (no bare wires) F. Polarization and color coding of wiring correct G. Disconnect switch & motor overload
protection present? H. Unit works properly I. Overall neatness J. Electrical and metal components grounded K. Electrical devices U.L. approved L. Proper guarding in place for application M. If outdoor application, is wiring weatherproof N. Exhibit is safe for intended use O. Basic concepts of AC and safe wiring
methods, electric motor wiring and protection P. Skills learned & able to identify improvement R. Written explanation clear, neat and explains
parts used to make project S. Originality T. Overall Appearance U. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor; use back) Rating:__________
AC Circuit Board
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Proper wire size and type for load B. Wires and devices properly routed & secured C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Wires in plugs, connector bodies, outlets & switches properly covered (no bare wires) F. Polarization and color coding of wiring correct G. Unit works properly H. Overall neatness I. Electrical and metal components grounded J. Electrical devices U.L. approved K. Exhibit is safe to operate L. Basic concepts of AC and safe wiring methods M. Skills learned & able to identify improvement N. Written explanation clear, neat and explains
parts used to make project O. Originality P. Overall Appearance Q. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Electronic and/or Solid State Drives
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Electronic components are organized on a circuit board and lead lengths kept at a minimum B. Circuit board soldering C. electronic circuit housed in a case, box, or installation is rugged D. Wire connectors properly secured or soldered
onto screw terminals E. Screws and mechanical connections tight F. Device works overall G. Overall neatness H. Batteries, wires & load size appropriate I. Exhibit is safe to operate (no short circuits or shock hazards, etc.) J. Able to describe function of electronic circuit &
various electronic components K. Skills learned & able to identify improvement L. Written explanation clear, neat and explains
parts used to make project M. Originality N. Overall Appearance O. Difficulty for age and years in project
Requirements Yes No A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Heating Equipment
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Proper wire size and type for load B. Wires and devices properly routed & secured C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Wires in plugs, connector bodies, outlets & switches properly covered (no bare wires) F. Polarization and color coding of wiring correct G. Unit works properly H. Overall neatness I. Electrical and metal components grounded J. Electrical devices U.L. approved K. Exhibit is safe to operate L. Basic concepts of AC and safe wiring methods M. Skills learned & able to identify improvement N. Written explanation clear, neat and explains
parts used to make project O. Originality P. Overall Appearance Q. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Alternative Energy Devices/Models
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Proper wire size and type for load B. Wires and devices properly routed & secured C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Wires in plugs, connector bodies, outlets & switches properly covered (no bare wires) F. Polarization and color coding of wiring correct G. Unit works properly H. Overall neatness I. Electrical and metal components grounded J. Electrical devices U.L. approved K. Exhibit is safe to operate L. Basic concepts of AC and safe wiring methods M. Skills learned & able to identify improvement N. Written explanation clear, neat and explains
parts used to make project O. Originality P. Overall Appearance Q. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Other Advanced Electronic Device
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Proper wire size and type for load B. Wires and devices properly routed & secured C. Wire connectors properly secured or soldered
onto screw terminals D. Screws and mechanical connections tight E. Wires in plugs, connector bodies, outlets & switches properly covered (no bare wires) F. Polarization and color coding of wiring correct G. Unit works properly H. Overall neatness I. Electrical and metal components grounded J. Electrical devices U.L. approved K. Exhibit is safe to operate L. Basic concepts of AC and safe wiring methods M. Skills learned & able to identify improvement N. Written explanation clear, neat and explains
parts used to make project O. Originality P. Overall Appearance Q. Difficulty for age and years in project
Requirements Yes No
A. Follows exhibit requirements B. Written explanation of construction and parts list included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking I, Manual
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking I, Non-Manual
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking II, Non-Manual
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking II, Manual
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking II, Refinishing
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. New parts fit well, wood matches B. Project sits straight and level C. Drawers and doors slide and open freely D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for B. Used original wood species as when item was made C. Included labeled picture(s) of the item prior to refinishing and pictures of the refinishing in progress
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking III, Non-Furniture
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking III, Manual
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking III, Furniture
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking III, Refinishing
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. New parts fit well, wood matches B. Project sits straight and level C. Drawers and doors slide and open freely D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for B. Used original wood species as when item was made C. Included labeled picture(s) of the item prior to refinishing and pictures of the refinishing in progress
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking IV, Manual
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking IV, Non-Manual
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Pieces cut proper length B. Accurate, uniform, smooth cuts C. Free of chipping, denting, etc. D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Woodworking IV, Refinishing
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. New parts fit well, wood matches B. Project sits straight and level C. Drawers and doors slide and open freely D. Woodcarving details are clean and uniform E. Joints fit snugly with even edges or uniform
overlap F. Fasteners (nails, screws, glues) used properly G. Finish is dry, smooth, uniform H. Finish free of dust, brush bristles, runs & sags I. Free of planer marks and cross-grain sanding J. Free of pencil marks, scratches, dents (unless
rustic design) K. Attractive, well proportioned L. Can serve purpose for which item is intended M. Proper selection of wood for use N. Overall appearance O. Difficulty for age and years in project
Requirements Yes No A. Card no larger than 4” x 6” explaining project and what it will be used for B. Used original wood species as when item was made C. Included labeled picture(s) of the item prior to refinishing and pictures of the refinishing in progress
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Introduction to Small Engines
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Accuracy and completeness of information included B. Engine parts correctly identified C. Function of engine parts correctly described D. Variety of parts included E. Overall Appearance F. Difficulty for age and years in project
Requirements Yes No A. Exhibit is an engine or lawn and garden equipment parts display B. Display no larger than 4’ x 4’
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Small Engine Maintenance
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Engine Characteristics: A. Starting B. Acceleration C. High speed D. Idle E. Engine noise F. Other engine adjustments G. Shutting off H. Safety precautions taken when repairing and operating the engine I. Finish (if repainted) J. Other K. Overall maintenance Maintenance and Operation: A. Completeness of annual maintenance done B. Safety checks done C. Lubrication schedule of equipment D. Maintenance of carburetion and ignition systems E. Blades sharpened or belts replaced when needed F. Other maintenance needed G. Knowledge of exhibitor H. Overall Appearance I. Difficulty for age and years in project
Requirements Yes No
A. Exhibit is either routine engine maintenance OR diagnosis of engine problems
Overall Comments: (Comments are helpful to the exhibitor; use back)
Rating:__________
Small Engine Operation
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Engine Characteristics: A. Starting B. Acceleration C. High speed D. Idle E. Engine noise F. Other engine adjustments G. Shutting off H. Safety precautions taken when repairing and operating the engine I. Finish (if repainted) J. Other K. Overall maintenance Maintenance and Operation: A. Completeness of annual maintenance done B. Safety checks done C. Lubrication schedule of equipment D. Maintenance of carburetion and ignition systems E. Blades sharpened or belts replaced when needed F. Other maintenance needed G. Knowledge of exhibitor H. Overall Appearance I. Difficulty for age and years in project
Requirements Yes No
A. Written maintenance schedule & description included
Overall Comments: (Comments are helpful to the exhibitor; use back) Rating:__________
Small Engine Display
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Accuracy and completeness of information included B. Engine parts or tools correctly identified C. Function of engine parts or tools correctly described D. Variety of tools included E. display explains the chosen experiment well F. Overall Appearance G. Difficulty for age and years in project
Requirements Yes No A. Exhibit one of the following: Ignition system OR Compression System OR Heat Transfer OR Filter Maintenance OR Serial Number OR Tools to do the Job OR Experimentation B. Display no larger than 4’ x 4’
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Tractor A
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Quality of work
B. Knowledge of exhibitor
C. Skills learned
D. Overall appearance
E. Difficulty for age and years in project
Requirements Yes No A. Size of exhibit does not exceed size limits
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Tractor B
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Quality of work
B. Knowledge of exhibitor
C. Skills learned
D. Overall appearance
E. Difficulty for age and years in project
Requirements Yes No A. Size of exhibit does not exceed size limits
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Tractor C
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Quality of work
B. Knowledge of exhibitor
C. Skills learned
D. Overall appearance
E. Difficulty for age and years in project
Requirements Yes No A. Size of exhibit does not exceed size limits
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Tractor D
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Quality of work
B. Knowledge of exhibitor
C. Skills learned
D. Overall appearance
E. Difficulty for age and years in project
Requirements Yes No A. Size of exhibit does not exceed size limits
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Tractor Innovation Class
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair
A. Accurate information
B. Well-formed idea/originality
C. Goals established
D. Exhibit reflects stated goal(s)
E. Ability to explain decisions or results shown
F. Skills/knowledge gained
G. Exhibitor’s ability to identify successes and failures
H. Appropriate level of content knowledge demonstrated
I. Logical flow to presentation; well-organized
J. Eye catching and appealing exhibit
K. Appropriate use of photographs, illustrations, design plans, etc. L. Will the viewer learn something?
Requirements Yes No
A. Size of exhibit does not exceed size limits
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Antique Tractors
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Quality of work
B. Knowledge of exhibitor
C. Notebook detailing steps taken included with exhibit
D. Overall appearance
E. Difficulty for age and years in project
Requirements Yes No
A. Equipment is 25 years old or older B. Implement detached from tractor C. Notebook included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Antique Lawn & Garden Tractors
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Quality of work
B. Knowledge of exhibitor
C. Notebook detailing steps taken included with exhibit
D. Overall appearance
E. Difficulty for age and years in project
Requirements Yes No
A. Equipment is 25 years old or older B. Implement detached from tractor C. Notebook included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Antique, All Other Equipment
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Quality of work
B. Knowledge of exhibitor
C. Notebook detailing steps taken included with exhibit
D. Overall appearance
E. Difficulty for age and years in project
Requirements Yes No
A. Equipment is 25 years old or older B. Implement detached from tractor C. Notebook included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Rocketry, Ages 8-9
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. All surfaces smooth, free of dents/nicks
B. Fins evenly spaced, aligned, sanded
C. Launch Lug firmly attached, properly aligned
D. Engine mount properly assembled, aligned, and installed
E. Recovery system operative, shock cord in place, nose cone ejects freely
F. Finish smooth, decals straight, paint without blemish
G. clean, neat, attractive
H. Overall Appearance
I. Difficulty for age and years in project
Requirements Yes No A. Rocket is flyable B. Balsa wood fins C. Recovery system in place D. Engine not installed E. Printed directions for construction (if used) included in envelope with exhibitor’s name F. Card no larger than 4” x 6” included with explanation of a problem faced and number of years’ experience (name not included)
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Rocketry, Ages 10-11
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. All surfaces smooth, free of dents/nicks
B. Fins evenly spaced, aligned, sanded
C. Launch Lug firmly attached, properly aligned
D. Engine mount properly assembled, aligned, and installed
E. Recovery system operative, shock cord in place, nose cone ejects freely
F. Finish smooth, decals straight, paint without blemish
G. clean, neat, attractive
H. Overall Appearance
I. Difficulty for age and years in project
Requirements Yes No A. Rocket is flyable B. Balsa wood fins C. Recovery system in place D. Engine not installed E. Printed directions for construction (if used) included in envelope with exhibitor’s name F. Card no larger than 4” x 6” included with explanation of a problem faced and number of years’ experience (name not included)
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Rocketry, Ages 12-14
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. All surfaces smooth, free of dents/nicks
B. Fins evenly spaced, aligned, sanded
C. Launch Lug firmly attached, properly aligned
D. Engine mount properly assembled, aligned, and installed
E. Recovery system operative, shock cord in place, nose cone ejects freely
F. Finish smooth, decals straight, paint without blemish
G. clean, neat, attractive
H. Overall Appearance
I. Difficulty for age and years in project
Requirements Yes No A. Rocket is flyable B. Balsa wood fins C. Recovery system in place D. Engine not installed E. Printed directions for construction (if used) included in envelope with exhibitor’s name F. Card no larger than 4” x 6” included with explanation of a problem faced and number of years’ experience (name not included)
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Rocketry, Ages 15+
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. All surfaces smooth, free of dents/nicks
B. Fins evenly spaced, aligned, sanded
C. Launch Lug firmly attached, properly aligned
D. Engine mount properly assembled, aligned, and installed
E. Recovery system operative, shock cord in place, nose cone ejects freely
F. Finish smooth, decals straight, paint without blemish
G. clean, neat, attractive
H. Overall Appearance
I. Difficulty for age and years in project
Requirements Yes No A. Rocket is flyable B. Balsa wood fins C. Recovery system in place D. Engine not installed E. Printed directions for construction (if used) included in envelope with exhibitor’s name F. Card no larger than 4” x 6” included with explanation of a problem faced and number of years’ experience (name not included)
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Diamond Kite
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of kite parts C. Understanding of terminology
Workmanship: A. Seams strong, tension correct B. Bridles tied firmly C. Colors appropriate for kite style D. Kite line strength appropriate for kite style and
weight E. Tail appropriate for kite style, weight and
usage F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No
A. Handmade kite (no kits) in good flying condition B. Exhibit is a static display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Create Your Own Kite, Ages 8-11
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of kite parts C. Understanding of terminology
Workmanship: A. Seams strong, tension correct B. Bridles tied firmly C. Colors appropriate for kite style D. Kite line strength appropriate for kite style and
weight E. Tail appropriate for kite style, weight and
usage F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No
A. Handmade kite (no kits) in good flying condition B. Exhibit is a static display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Nagasaki Hata Fighter Kite
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of kite parts C. Understanding of terminology
Workmanship: A. Seams strong, tension correct B. Bridles tied firmly C. Colors appropriate for kite style D. Kite line strength appropriate for kite style and
weight E. Tail appropriate for kite style, weight and
usage F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No
A. Handmade kite (no kits) in good flying condition B. Exhibit is a static display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Create Your Own Kite, Ages 12-14
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of kite parts C. Understanding of terminology
Workmanship: A. Seams strong, tension correct B. Bridles tied firmly C. Colors appropriate for kite style D. Kite line strength appropriate for kite style and
weight E. Tail appropriate for kite style, weight and
usage F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No
A. Handmade kite (no kits) in good flying condition B. Exhibit is a static display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Brouhaha Box Kite
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of kite parts C. Understanding of terminology
Workmanship: A. Seams strong, tension correct B. Bridles tied firmly C. Colors appropriate for kite style D. Kite line strength appropriate for kite style and
weight E. Tail appropriate for kite style, weight and
usage F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No
A. Handmade kite (no kits) in good flying condition B. Exhibit is a static display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Create Your Own Kite, Ages 15+
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of kite parts C. Understanding of terminology
Workmanship: A. Seams strong, tension correct B. Bridles tied firmly C. Colors appropriate for kite style D. Kite line strength appropriate for kite style and
weight E. Tail appropriate for kite style, weight and
usage F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No
A. Handmade kite (no kits) in good flying condition B. Exhibit is a static display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Model Airplanes, Ages 8-11
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of model airplane parts C. Understanding of terminology D. How to fly model
Workmanship: A. All surfaces smooth, free of dents/nicks B. Wings/tail straight, square C. Fins and stabilizer at right angle to fuselage D. No warps/bends E. Finish smooth F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No A. Balsa and fabric type model B. Static display C. Directions for construction included (if used)
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Model Airplanes, Ages 12-14
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of model airplane parts C. Understanding of terminology D. How to fly model
Workmanship: A. All surfaces smooth, free of dents/nicks B. Wings/tail straight, square C. Fins and stabilizer at right angle to fuselage D. No warps/bends E. Finish smooth F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No A. Balsa and fabric type model B. Static display C. Directions for construction included (if used)
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Model Airplanes, Ages 15+
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair Knowledge of Exhibitor: A. Basics of flight B. Identification of model airplane parts C. Understanding of terminology D. How to fly model
Workmanship: A. All surfaces smooth, free of dents/nicks B. Wings/tail straight, square C. Fins and stabilizer at right angle to fuselage D. No warps/bends E. Finish smooth F. Clean, neat, attractive G. Overall Appearance H. Difficulty for age and years in project
Requirements Yes No A. Balsa and fabric type model B. Static display C. Directions for construction included (if used)
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Aerospace Display, Ages 8-11
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Exhibitor’s basic knowledge of flight B. Exhibitor’s identification of parts C. Exhibitor’s understanding of terminology D. Accurate information E. Complete, short, precise message F. Functions correctly described G. Attracts attention of viewer H. Good design I. Use of actual materials, samples or models J. Clean, neat, attractive K. Skills learned & able to identify improvement L. Overall Appearance M. Difficulty for age and years in project
Requirements Yes No A. Exhibit does not fit into any other class B. Exhibit includes something visual C. Explanation for public understanding mounted directly on poster or display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Aerospace Display, Ages 12-14
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Exhibitor’s basic knowledge of flight B. Exhibitor’s identification of parts C. Exhibitor’s understanding of terminology D. Accurate information E. Complete, short, precise message F. Functions correctly described G. Attracts attention of viewer H. Good design I. Use of actual materials, samples or models J. Clean, neat, attractive K. Skills learned & able to identify improvement L. Overall Appearance M. Difficulty for age and years in project
Requirements Yes No A. Exhibit does not fit into any other class B. Exhibit includes something visual C. Explanation for public understanding mounted directly on poster or display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Aerospace Display, Ages 15+
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Exhibitor’s basic knowledge of flight
B. Exhibitor’s identification of parts
C. Exhibitor’s understanding of terminology
D. Accurate information
E. Complete, short, precise message
F. Functions correctly described
G. Attracts attention of viewer
H. Good design
I. Use of actual materials, samples or models
J. Clean, neat, attractive
K. Skills learned & able to identify improvement
L. Overall Appearance
M. Difficulty for age and years in project
Requirements Yes No
A. Exhibit does not fit into any other class B. Exhibit includes something visual C. Explanation for public understanding mounted directly on poster or display
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Welding, Ages 10-14
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Design B. Selection and use of materials C. Originality D. Workmanship E. Finished properly F. Overall Appearance G. Difficulty for age and years in project
Requirements Yes No A. Item could not have been made without the use of a welder
B. Card no larger than 4” x 6” including type of welder, materials used and explaining how exhibit is to be used
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Welding, Ages 15+
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Design B. Selection and use of materials C. Originality D. Workmanship E. Finished properly F. Overall Appearance G. Difficulty for age and years in project
Requirements Yes No A. Item could not have been made without the use of a welder
B. Card no larger than 4” x 6” including type of welder, materials used and explaining how exhibit is to be used
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Exploring Spaces, Going Places 1
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Accurate and adequate information B. Easily understood message C. Attracts attention of viewer D. Good design E. Exhibitor’s general geospatial knowledge F. Overall Appearance G. Difficulty for age and years in project
Requirements Yes No A. Poster no larger than 22” x 30” OR display no larger than 15”D x 24”W x 36”H B. Identifies 4-6 tour sites OR shows 10 mapping tools C. Display meets all requirements listed in fair book
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Exploring Spaces, Going Places 2
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Accurate and adequate information B. Easily understood message C. Attracts attention of viewer D. Good design E. Exhibitor’s general geospatial knowledge F. Overall Appearance G. Difficulty for age and years in project
Requirements Yes No A. Poster no larger than 22” x 30” OR display no larger than 15”D x 24”W x 36”H B. Exhibit map using “Take Me on a Tour” activity from project manual C. Display meets all requirements listed in fair book
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Exploring Spaces, Going Places 3
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Accurate and adequate information B. Easily understood message C. Attracts attention of viewer D. Good design E. Exhibitor’s general geospatial knowledge F. Overall Appearance G. Difficulty for age and years in project
Requirements Yes No A. Poster no larger than 22” x 30” OR display no larger than 15”D x 24”W x 36”H B. Map with info on a community need C. Display meets all requirements listed in fair book
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
GPS/Geocaching 1
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Exhibitor’s knowledge of terminology B. Exhibitor demonstrates understanding of topic C. Demonstrates understanding of material presented D. Accurate and adequate information E. Easily understood message F. Attracts attention of viewer G. Design of the display H. Clean, neat, attractive I. Overall Appearance J. Difficulty for age and years in project
Requirements Yes No
A. Poster no larger than 22” x 30” OR display no larger than 15”D x 24”W x 36”H B. Met class requirements as specified in fair book
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
GPS/Geocaching 2
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Exhibitor’s knowledge of terminology B. Exhibitor demonstrates understanding of topic C. Demonstrates understanding of material presented D. Accurate and adequate information E. Easily understood message F. Attracts attention of viewer G. Design of the display H. Clean, neat, attractive I. Overall Appearance J. Difficulty for age and years in project
Requirements Yes No
A. Poster no larger than 22” x 30” OR display no larger than 15”D x 24”W x 36”H B. Met class requirements as specified in fair book
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Robotics I Beginner
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Overall neatness B. Appropriate application for technology C. Understands terminology D. Skills learned & able to identify improvements E. Follows exhibit requirements F. Written explanation clear, neat and conveys intended message G. Originality H. Overall Appearance I. Difficulty for age and years in project
Requirements Yes No
A. Robotics notebook with engineering design experience included B. Written explanation of exhibit included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Robotics I Intermediate
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Overall neatness B. Appropriate application for technology C. Understands terminology D. Skills learned & able to identify improvements E. Follows exhibit requirements F. Written explanation clear, neat and conveys intended message G. Originality H. Overall Appearance I. Difficulty for age and years in project
Requirements Yes No
A. Robotics notebook with engineering design experience included B. Written explanation of exhibit included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Robotics II
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Overall neatness B. Appropriate application for technology C. Understands terminology D. Skills learned & able to identify improvements E. Follows exhibit requirements F. Written explanation clear, neat and conveys intended message G. Originality H. Overall Appearance I. Difficulty for age and years in project
Requirements Yes No
A. Robotics notebook with engineering design experience included B. Written explanation of exhibit included
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Junkdrawer Robotics I
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Good design B. Durability/reusability C. Appropriate sensors used for task D. Appropriate application for technology E. Program & robot function together to accomplish task F. Exhibitor understand use of sensors & motors G. Exhibitor understands terminology H. Skills learned & able to identify improvements I. Written explanation clear & neat J. Originality K. Overall Appearance L. Difficulty for age and years in project
Requirements Yes No A. Junk Drawer Robotics notebook with completed sections leading up to exhibit B. Written explanation of exhibit included C. Follows exhibit requirements
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Junkdrawer Robotics II
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Good design B. Durability/reusability C. Appropriate sensors used for task D. Appropriate application for technology E. Program & robot function together to accomplish task F. Exhibitor understand use of sensors & motors G. Exhibitor understands terminology H. Skills learned & able to identify improvements I. Written explanation clear & neat J. Originality K. Overall Appearance L. Difficulty for age and years in project
Requirements Yes No A. Junk Drawer Robotics notebook with completed sections leading up to exhibit B. Written explanation of exhibit included C. Follows exhibit requirements
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Junk Drawer Robotics III
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair A. Good design B. Durability/reusability C. Appropriate sensors used for task D. Appropriate application for technology E. Program & robot function together to accomplish task F. Exhibitor understand use of sensors & motors G. Exhibitor understands terminology H. Skills learned & able to identify improvements I. Written explanation clear & neat J. Originality K. Overall Appearance L. Difficulty for age and years in project
Requirements Yes No A. Junk Drawer Robotics notebook with completed sections leading up to exhibit B. Written explanation of exhibit included C. Follows exhibit requirements
Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________
Robotics Innovation Class
Exhibitor Name: _______________________________________
Club: ________________________________________________
Age:_________ Criteria Excellent Good Fair
A. Accurate information
B. Well-formed idea/originality
C. Goals established
D. Exhibit reflects stated goal(s)
E. Ability to explain decisions or results shown
F. Skills/knowledge gained
G. Exhibitor’s ability to identify successes and failures
H. Appropriate level of content knowledge demonstrated
I. Logical flow to presentation; well-organized
J. Eye catching and appealing exhibit
K. Appropriate use of photographs, illustrations, design plans, etc.
L. Will the viewer learn something?
Requirements Yes No A. Follows exhibit requirements Overall Comments: (Comments are helpful to the exhibitor)
Rating:__________