opc ppt final.pptx
Transcript of opc ppt final.pptx
A Study OnOperations Planning & Control of Bharath Seating Systems
Under the guidance of Syed Habeeb
Submitted byA.Bharath (148903)B.Akshara (148904)E.Nischala (148916)P.Nithya (148935)
Introduction
• Bharat seating system is known as one of the leading offices chairs manufacturers
• Bharat seating system is a company that was initially started manufacturing office chairs Mumbai in the year 1996
• They not only serve products to offices but also to restaurants,cafeterias,hospitals,schools, auditoriums and homes.
• Their products are especially designed and produced to reduce body fatigue and increase work
performance
• Their products can also be customized according to a client’s requirement.
• website is available to customers all over the world
• We not only deal with local clients but also with national and international clients.
Strategy for choosing this location
Production process
Procurement of Raw material
Production and manufacturing process
Distribution
Procurement of raw material
Reliance 110 -60%- for strengthCP -25% - for bending purpose
Filler – 15% - for weight supportMaster batch – 2%- for colour
Poly propylene:
Master batch
Production and manufacturing process
• Rotational Moulding•Injection Moulding•Gas Assisted Injection Moulding
Hallow chair
Stage-1The mixture of raw material is poured into the machine.
Stage-2The mixture is injected into the mould cavity of desired shape
of a chair.
Stage-3Then the injection unit is retracted from the mould cavity after
injecting the plastic.
Stage-4The screw rolls back and the barrel is filled
with another shot of plastic. Meanwhile, the plastic in the mould cavity cools and solidifies
the plastic.
Stage-5The machine gets opened and ejector mechanism begins.
Stage-6Finally, the component drops out of the machine for the next
process activity.
Jit & Lean
• Bharat seating systems are doing a good job in plastic chairs production by using even the recycled plastic.
• The waste plastic is again made into powder and used for manufacturing chairs.
Production capacity
A single chair is produced in just 57
seconds by means of the machine. In a day
around 1400 chairs are produced
depending on the working hours of the
employees.
Inventory management
Customer Relationship Management
• To meet the demand requirement.
• Retail distributors in & around districts of
Telangana & Andhrapradesh.
Conclusion
• The common chairs like monobloc chairs have high demand in the market. By employing different design and producing other plastic products will be helpful for KPI in improving its profits and extending its range of operations.
THANK YOU