Op to Electronic
-
Upload
jhonata-rodrigues-carvalho -
Category
Documents
-
view
20 -
download
2
Transcript of Op to Electronic
BOS 18KF, BOS 18KWOptosensors – Redefined Standards
The wide range of opto-electronic sensors fromBalluff offers applicationsolutions in the areasof robotics, automation,assembly and handling,and many others.
Each family has its specialstrengths, so you canchoose the one designedto address your particularneeds and requirements.In addition to tubularhousings from M12 to M30constructed of metal, stain-less steel or plastic, Balluffoffers numerous versionsin rectilinear form factors inplastic or metal in virtuallyall sizes with variousfunctions and performancecharacteristics.
BOS
2.1.2
In addition to the traditionaldiffuse, retroreflectiveand thru-beam types, theBalluff opto line also offersspecial functions andversions including back-ground suppression,distance sensors and color-and contrast sensors.
For applications in difficultambient conditions, Balluffoffers a wide variety of high-performance fiber opticsensors with glass or plasticfiber optic cable and theassociated base units.
BOS
OptoSensors
Balluff Optoelectronic SensorsDiffuseDiffuse with background suppressionRetroreflectiveThru-beamLaser sensorsDistance sensorsSlot sensorsDynamic optical windowsContrast sensorsColor sensorsLuminescence sensorsFiber optic sensors
BOS 18KF, BOS 18KWOptoelectronicSensors
2.1.3
2.1
BOS 18KFaxial opticsmax. range 100 mmmax. range 700 mmmax. range 350 mmmax. range 4,5 mmax. range 16 mmmax. range 20 mmmax. range 60 mm
Light type
Red lightInfraredLaserRed lightLaserInfraredLaser
BOS 18KWradial opticsmax. range 100 mmmax. range 400 mmmax. range 250 mmmax. range 3 mmax. range 9 mmax. range 15 mmax. range 50 m
Overview
Diffuse with background suppressionEnergetic diffuse sensorsLaser diffuse sensorsRetroreflective with polarizing filterLaser retroreflective with polarizing filterThru-beamLaser thru-beam
Redefined StandardsBOS 18KF, BOS 18KWOptosensors –redefined standards
The overhauled Series 18Khas not only a new look,but also features anexpanded range of modelsand improved technicalspecifications.
These sensors are availablewith red or infrared lightor with optional laser lightin protection class 1.Calibration is accomplishedusing either a potentiometeror by means of teach-in.
The plastic housing with flatsides allows them to beinstalled using the includedM18 nuts or by means ofscrews through the sensorbody.
The sensors are availablewith axial or radial opticswith cable or M12 connectorconfigurations and PNP orNPN output.
OptoelectronicSensors
BOS 18KFRange 50...100 mm
2.1.4
Diffuse with background suppression maximum rangeDiffuse maximum range
DiffusePNP 50...100 mm HGANPN 50...100 mm HGAPNP 100 mmNPN 100 mmPNP 700 mmNPN 700 mmElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.OutputOutput currentSwitching typeVoltage drop Ud at IeSettingsHelp functionsOptical dataRecommended rangeEmitter, light typeWavelengthLight spot diameterDisplaySupply voltage indicatorOutput function indicatorStability indicatorTime dataResponse timeFrequency of operating cycles fMechanical dataConnectionNo. of wires x conductor cross sectionHousing materialLens materialWeightAmbient dataDegree of protection per IEC 60529Protected against polarity reversalShort circuit protectedAmbient temperature range Ta
Applicable standard
Diffuse values referenced to Kodak gray card90 % reflection.
50...100 mm
BOS 18KF-PA-1HA-S4-CBOS 18KF-NA-1HA-S4-C
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
teach-in
50...100 mmLED, red light
630 nmapprox. 8 mm at 100 mm
LED yellowLED green/red
1 ms500 Hz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
50...100 mm
BOS 18KF-PA-1HA-C-02BOS 18KF-NA-1HA-C-02
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
teach-in
50...100 mmLED, red light
630 nmapprox. 8 mm at 100 mm
LED yellowLED green/red
1 ms500 Hz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
Tolerance with standard setting
Function diagrams BOS 18KF-..-1HA-...
Tolerance with fine setting
percentagedifference percentage
difference
settings against white background 90 % settings against white background 90 %
white 90 %
gray 18 %
white 90 %
gray 18 %
teach-in teach-in
BOS 18KFRange 0...100 mm,0...700 mm
OptoelectronicSensors
2.1.5
2.1
0...700 mm
BOS 18KF-PA-1PE-C-02BOS 18KF-NA-1PE-C-02
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...600 mmLED, infrared
880 nmapprox. 40 mm at 600 mm
LED yellowLED green
0.5 ms1 kHz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...100 mm
BOS 18KF-PA-1XA-S4-CBOS 18KF-NA-1XA-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
0...100 mmLED, infrared
880 nmapprox. 80 mm at 100 mm
LED yellow
0.5 ms1 kHz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...100 mm
BOS 18KF-PA-1XA-C-02BOS 18KF-NA-1XA-C-02
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
0...100 mmLED, infrared
880 nmapprox. 80 mm at 100 mm
LED yellow
0.5 ms1 kHz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...700 mm
BOS 18KF-PA-1PE-S4-CBOS 18KF-NA-1PE-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...600 mmLED, infrared
880 nmapprox. 40 mm at 600 mm
LED yellowLED green
0.5 ms1 kHz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
Function diagrams BOS 18KF-..-1XA-... Function diagrams BOS 18KF-..-1PE-...
Capture range Capture rangeFunction reserve Function reserve
white 90 %gray 18 %
white 90 %gray 18 %
white 90 %
gray 18 %
white 90 %gray 18 %
Diffuse
BOS 18KFRange 0.1...4.5 m
2.1.6
Retroreflective with polarizing filter maximum rangeThru-beam maximum range
RetroreflectivePNP 0.1...4.5 m polarizing filterNPN 0.1...4.5 m polarizing filterThru-beamPNP 20 m receiverNPN 20 m receiver
20 m emitterElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.OutputOutput currentSwitching typeVoltage drop Ud at IeSettingsHelp functionsOptical dataRecommended rangeEmitter, light typeWavelengthLight spot diameterDisplaySupply voltage indicatorOutput function indicatorStability indicatorTime dataResponse timeFrequency of operating cycles fMechanical dataConnectionNo. of wires x conductor cross sectionHousing materialLens materialWeightAmbient dataDegree of protection per IEC 60529Protected against polarity reversalShort circuit protectedAmbient temperature range Ta
Applicable standard
Retroreflective values referenced to R1 reflector.
0.1...4.5 m
BOS 18KF-PA-1QD-S4-CBOS 18KF-NA-1QD-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0.1...4 mLED, red light
630 nmapprox. 65 mm at 3 m
LED yellowLED green
0.5 ms1 kHz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0.1...4.5 m
BOS 18KF-PA-1QD-C-02BOS 18KF-NA-1QD-C-02
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0.1...4 mLED, red light
630 nmapprox. 65 mm at 3 m
LED yellowLED green
0.5 ms1 kHz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
Capture range Function reserve
Function diagrams BOS 18KF-..-1QD-...
with reflector R1
with reflector R1
OptoelectronicSensors
BOS 18KFRange 0...20 m
2.1.7
2.1
0...20 m
BLS 18KF-XX-1P-L-02
10...30 V DC≤ 2 V
≤ 35 mA
test input
0...15 mLED, infrared
880 nmapprox. 500 mm at 15 m
LED green
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...20 m
BLE 18KF-PA-1PP-S4-CBLE 18KF-NA-1PP-S4-C
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...15 m
LED greenLED yellow
2 ms250 Hz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...20 m
BLS 18KF-XX-1P-S4-L
10...30 V DC≤ 2 V
≤ 35 mA
test input
0...15 mLED, infrared
880 nmapprox. 500 mm at 15 m
LED green
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...20 m
BLE 18KF-PA-1PP-C-02BLE 18KF-NA-1PP-C-02
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...15 m
LED greenLED yellow
2 ms250 Hz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
Capture range Function reserve
Function diagrams BLE/BLS 18KF-..-1PP/1P-...
RetroreflectiveThru-beam
OptoelectronicSensors
BOS 18KF Laser
2.1.8
Diffuse maximum rangeRetroreflective with polarizing filter maximum rangeThru-beam maximum range
DiffusePNP 350 mmNPN 350 mmRetroreflectivePNP 0.1...16 m polarizing filterNPN 0.1...16 m polarizing filterThru-beamPNP 60 m receiverNPN 60 m receiver
60 m emitterElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.OutputOutput currentSwitching typeVoltage drop Ud at IeSettingsHelp functionsOptical DataRecommended rangeEmitter, light typeWavelengthLaser protection classResolution
DisplaySupply voltage indicatorOutput function indicatorStability indicatorTime dataResponse timeFrequency of operating cycles fMechanical dataConnectionHousing materialLens materialWeightAmbient dataDegree of protection per IEC 60529Protected against polarity reversalShort circuit protectedAmbient temperature range Ta
Applicable standard
Diffuse values referenced to Kodak gray card 90 % reflection.Retroreflective values referenced to R1 reflector.
Capture range
Resolution
Function diagrams BOS 18KF-..-1LOC-...
Function diagrams BOS 18KF-..-1LQP-...
Function diagrams BLE/BLS 18KF-..-1LT-...
Capture range
Resolution
Capture range
Resolution
white 90 %
gray 18 %
with reflector R1
OptoelectronicSensors
0...350 mm
BOS 18KF-PA-1LOC-S4-CBOS 18KF-NA-1LOC-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...350 mmlaser, red light
650 nmclass 1
approx. 0.3 mm at 50 mmapprox. 0.3 mm at 100 mmapprox. 0.5 mm at 150 mm
LED yellowLED green
333 µs1.5 kHz
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
0.1...16 m
BOS 18KF-PA-1LQP-S4-CBOS 18KF-NA-1LQP-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0.1...16 mlaser, red light
650 nmclass 1
approx. 9 mm over 1 m
LED yellowLED green
333 µs1.5 kHz
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
BOS 18KF LaserRange 0...350 mm,0.1...16 m, 0...60 m
2.1.9
2.1
DiffuseRetroreflective
Thru-beam
0...60 m
BLS 18KF-XX-1LT-S4-L
10...30 V DC≤ 2 V
≤ 35 mA
test input
0...60 mlaser, red light
650 nmclass 1
approx. 2,5 mm at 5 mapprox. 5 mm at 10 mapprox. 10 mm at 20 m
LED green
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
0...60 m
BLE 18KF-PA-1LT-S4-CBLE 18KF-NA-1LT-S4-C
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...60 m
LED greenLED yellow
333 µs1.5 kHz
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
OptoelectronicSensors
BOS 18KWRange 50...100 mm
2.1.10
Diffuse with background suppression maximum rangeDiffuse maximum range
DiffusePNP 50...100 mm HGANPN 50...100 mm HGAPNP 80 mmNPN 80 mmPNP 400 mmNPN 400 mmElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.OutputOutput currentSwitching typeVoltage drop Ud at IeSettingsHelp functionsOptical dataRecommended rangeEmitter, light typeWavelengthLight spot diameterDisplaySupply voltage indicatorOutput function indicatorStability indicatorTime dataResponse timeFrequency of operating cycles fMechanical dataConnectionNo. of wires x conductor cross sectionHousing materialLens materialWeightAmbient dataDegree of protection per IEC 60529Protected against polarity reversalShort circuit protectedAmbient temperature range Ta
Applicable standard
Diffuse values referenced to Kodak gray card90 % reflection.
50...100 mm
BOS 18KW-PA-1HA-S4-CBOS 18KW-NA-1HA-S4-C
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
teach-in
50...100 mmLED, red light
630 nmapprox. 10 mm at 100 mm
LED yellowLED green/red
1 ms500 Hz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
50...100 mm
BOS 18KW-PA-1HA-C-02BOS 18KW-NA-1HA-C-02
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
teach-in
50...100 mmLED, red light
630 nmapprox. 10 mm at 100 mm
LED yellowLED green/red
1 ms500 Hz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
Tolerance with standard setting
Function diagrams BOS 18KW-..-1HA-...
Tolerance with fine setting
percentagedifference percentage
difference
settings against white background 90 % settings against white background 90 %
white 90 %
gray 18 %
white 90 %
gray 18 %
OptoelectronicSensors
teach-in teach-in
BOS 18KWRange 0...80 mm,0...400 mm
2.1.11
2.1
0...400 mm
BOS 18KW-PA-1PD-C-02BOS 18KW-NA-1PD-C-02
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...350 mmLED, infrared
880 nmapprox. 35 mm at 400 mm
LED yellowLED green
0.5 ms1 kHz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...80 mm
BOS 18KW-PA-1XA-S4-CBOS 18KW-NA-1XA-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
0...80 mmLED, infrared
880 nmapprox. 55 mm at 100 mm
LED yellow
0.5 ms1 kHz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...80 mm
BOS 18KW-PA-1XA-C-02BOS 18KW-NA-1XA-C-02
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
0...80 mmLED, infrared
880 nmapprox. 55 mm at 100 mm
LED yellow
0.5 ms1 kHz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...400 mm
BOS 18KW-PA-1PD-S4-CBOS 18KW-NA-1PD-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...350 mmLED, infrared
880 nmapprox. 35 mm at 400 mm
LED yellowLED green
0.5 ms1 kHz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
opticalaxis
opticalaxis
opticalaxis
opticalaxis
Function diagrams BOS 18KW-..-1XA-... Function diagrams BOS 18KW-..-1PD-...
Capture range Capture rangeFunction reserve Function reserve
white 90 %gray 18 %
white 90 %gray 18 %
white 90 %
gray 18 %
gray 18 %
DiffuseOptoelectronicSensors
white 90 %
BOS 18KWRange 0.1...3 m
2.1.12
Retroreflective with polarizing filter maximum rangeThru-beam maximum range
RetroreflectivePNP 0.1...3 m polarizing filterNPN 0.1...3 m polarizing filterThru-beamPNP 15 m receiverNPN 15 m receiver
15 m emitterElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.OutputOutput currentSwitching typeVoltage drop Ud at IeSettingsHelp functionsOptical dataRecommended rangeEmitter, light typeWavelengthLight spot diameterDisplaySupply voltage indicatorOutput function indicatorStability indicatorTime dataResponse timeFrequency of operating cycles fMechanical dataConnectionNo. of wires x conductor cross sectionHousing materialLens materialWeightAmbient dataDegree of protection per IEC 60529Protected against polarity reversalShort circuit protectedAmbient temperature range Ta
Applicable standard
Retroreflective values referenced to R1 reflector.
0.1...3 m
BOS 18KW-PA-1QC-S4-CBOS 18KW-NA-1QC-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0.1...2.5 mLED, red light
630 nmapprox. 60 mm at 2 m
LED yellowLED green
0.5 ms1 kHz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0.1...3 m
BOS 18KW-PA-1QC-C-02BOS 18KW-NA-1QC-C-02
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0.1...2.5 mLED, red light
630 nmapprox. 60 mm at 2 m
LED yellowLED green
0.5 ms1 kHz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
opticalaxis
opticalaxis
Capture range
Function diagrams BOS 18KW-..-1QC-...
Function reserve
with reflector R1
with reflector R1
OptoelectronicSensors
BOS 18KWRange 0...15 m
2.1.13
2.1
0...15 m
BLS 18KW-XX-1P-L-02
10...30 V DC≤ 2 V
≤ 35 mA
test input
0...10 mLED, infrared
880 nmapprox. 470 mm at 10 m
LED green
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...15 m
BLE 18KW-PA-1PP-S4-CBLE 18KW-NA-1PP-S4-C
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...10 m
LED greenLED yellow
2 ms250 Hz
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...15 m
BLS 18KW-XX-1P-S4-L
10...30 V DC≤ 2 V
≤ 35 mA
test input
0...10 mLED, infrared
880 nmapprox. 470 mm at 10 m
LED green
M12 connector, 4-pin
PBTPMMA25 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
0...15 m
BLE 18KW-PA-1PP-C-02BLE 18KW-NA-1PP-C-02
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...10 m
LED greenLED yellow
2 ms250 Hz
2 m cable, PVC4 × 0.14 mm²
PBTPMMA75 g
IP 67yesyes
–25...+55 °CEN 60947-5-2
opticalaxis
opticalaxis
opticalaxis
opticalaxis
Capture range Function reserve
Function diagrams BLE/BLS 18KW-..-1PP/1P-...
RetroreflectiveThru-beam
OptoelectronicSensors
2.1.14
BOS 18KW Laser
2.1.14
Diffuse maximum rangeRetroreflective with polarizing filter maximum rangeThru-beam maximum range
DiffusePNP 250 mmNPN 250 mmRetroreflectivePNP 0.1...9 m polarizing filterNPN 0.1...9 m polarizing filterThru-beamPNP 50 m receiverNPN 50 m receiver
50 m emitterElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.OutputOutput currentSwitching typeVoltage drop Ud at IeSettingsHelp functionsOptical DataRecommended rangeEmitter, light typeWavelengthLaser protection classResolution
DisplaySupply voltage indicatorOutput function indicatorStability indicatorTime dataResponse timeFrequency of operating cycles fMechanical dataConnectionHousing materialLens materialWeightAmbient dataDegree of protection per IEC 60529Protected against polarity reversalShort circuit protectedAmbient temperature range Ta
Applicable standard
Diffuse values referenced to Kodak gray card 90 % reflection.Retroreflective values referenced to R1 reflector.
Capture range
Resolution
Function diagrams BOS 18KW-..-1LOB-...
Function diagrams BOS 18KW-..-1LQH-...
Function diagrams BLE/BLS 18KW-..-1LT-...
Capture range
Resolution
Capture range
Resolution
white 90 %
gray 18 %
with reflector R1
OptoelectronicSensors
BOS 18KW LaserRange 0...250 mm,0.1...9 m, 0...50 m
2.1.15
2.1
0...250 mm
BOS 18KW-PA-1LOB-S4-CBOS 18KW-NA-1LOB-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...250 mmlaser, red light
650 nmclass 1
approx. 0.3 mm at 50 mmapprox. 0.3 mm at 100 mmapprox. 0.5 mm at 150 mm
LED yellowLED green
333 µs1.5 kHz
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
0.1...9 m
BOS 18KW-PA-1LQH-S4-CBOS 18KW-NA-1LQH-S4-C
10...30 V DC≤ 2 V
≤ 35 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0.1...9 mlaser, red light
650 nmclass 1
approx. 9 mm over 1 m
LED yellowLED green
333 µs1.5 kHz
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
opticalaxis
opticalaxis
0...50 m
BLS 18KW-XX-1LT-S4-L
10...30 V DC≤ 2 V
≤ 35 mA
test input
0...50 mlaser, red light
650 nmclass 1
approx. 2,5 mm at 5 mapprox. 5 mm at 10 mapprox. 10 mm at 20 m
LED green
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
0...50 m
BLE 18KW-PA-1LT-S4-CBLE 18KW-NA-1LT-S4-C
10...30 V DC≤ 2 V
≤ 30 mAPNP/NPN100 mA
light-on and dark-on≤ 2 V
potentiometer 270°
0...50 m
LED greenLED yellow
333 µs1.5 kHz
M12 connector, 4-pinPBT
PMMA25 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
opticalaxis
opticalaxis
DiffuseRetroreflective
Thru-beamOptoelectronicSensors
Connection Diagrams,Connector Orientation,Accessories
OptoelectronicSensors
2.1.16
Balluff GmbHSchurwaldstrasse 973765 Neuhausen a.d.F.GermanyPhone +49 (0) 71 58/1 73-0Fax +49 (0) 71 58/50 10E-Mail: [email protected] N
o. 8
2894
5 E
. E
ditio
n 03
03;
Sub
ject
to
mod
ifica
tion.
Mounting clampBOS 18,0-KB-1
Protective end capBOS 18-SM-1for BOS 18KF andBOS 18KF Laser
Air shieldBOS 18-LT-1for BOS 18KF andBOS 18KF Laser
Recommended accessoriesplease order separately
For more accessories see maincatalog "The Sensor Program",sections 2.3 and 6.
Angle bracketBES 18-HW-1
ApertureBOS 18-BL-1for BLE/BLS 18KF
ConnectorBKS-_ 19/BKS-_ 20
Connector orientation
1
4
2
3
+UB
0 V
BN
BK
WH
BU
+UB
0 V
1
4
2
3
+UB
0 VTest+
Test–
BN
BK
WH
BU
+UB
0 VTest+
Test–
1
4
2
3
+UB
0 V
BN
BK
WH
BU
+UB
0 V
Wiring diagrams
BOS/BLE...PA...
BOS/BLE...NA...
BLS
Reflector BOS R-1Reflectors with higherreflectivity will increasethe range.
Mounting clampBOS 18,0-KB-2
For more sensors see maincatalog "The Sensor Program"on CD-ROM or online!
www.balluff.de
BOS 18KF BOS 18KW