ONYX - tools catalogue 2016
-
Upload
vitalii-bogdanov -
Category
Documents
-
view
301 -
download
9
description
Transcript of ONYX - tools catalogue 2016
Our company “ETALON Shenzhen Exp / Imp Company LTD”, which owns the trademarks “ONYX” and “Etalon” appeared in 2003 and located in
Shenzhen City, Guangdong Province, PRC. We offer a comprehensive supply of measuring, cutting, construction, plumbing tools, uniforms and equipment
from China.
The company propose a flexible pricing policy and practices an individual approach to every client.
Since its establishment, we pay much attention to working with partners, attentive to their needs and continually improve customer service. Among
our regular customers – wholesalers, special stores, tools producing companies, online retailers and government agencies.
OUR ADVANTAGES:
• We work with tools, uniforms and equipment, and we are – professionals in this field. Our specialization, expertise and experience ensure the high
quality for the product.
• We are high volume and high turnover to optimize overhead that allows us to provide our customers with the most competitive price.
• Depending on the customer’s needs, we are able to ship the products both from China and make deliveries “door to door”.
4Measuring tools
29Grinding&Cutting tools
36Scrapers&Knives
38Paint&Finishing
39Worker protection
38Automobile tools
22Drill bits
34Carpenter tools
37Caulking&Foam guns
38Plumbing tools
38Household goods
Item NameItem number
carbon steel stainless steel
Square 1000x630, grade1 030067 030167
Square 1000x630, grade2 030068 030168
Square 100x60, grade0 030016 030116
Square 100x60, grade1 030017 030117
Square 100x60, grade2 030018 030118
Square 100x60, grade3 030019 030119
Square 160x100, grade0 030026 030126
Square 160x100, grade1 030027 030127
Square 160x100, grade2 030028 030128
Square 160x100, grade3 030029 030129
Square 160x250, grade0 030036 030136
Square 160x250, grade1 030037 030137
Square 160x250, grade2 030038 030138
Square 160x250, grade3 030039 030139
Square 400x250, grade1 030047 030147
Square 400x250, grade2 030048 030148
Square 60x40, grade0 030006 030106
Square 60x40, grade1 030007 030107
Square 60x40, grade2 030008 030108
Square 630x400, grade1 030057 030157
Square 630x400, grade2 030058 030158
MEASURING TOOLS
FRAMING SQUARES
BROAD BASE FRAMING SQUARE
Designed for the 90 degrees angles testing.
- The perpendicular parts arrangement and the surface straightness control ability;
- Broad base to ensure stable position for the measurements;
- Can be produced from hardened or stainless steel.
STEEL FRAMING SQUARE
Designed for the 90 degrees angles testing.
- The perpendicular parts arrangement and the surface straightness control ability;
- Can be produced from hardened or stainless steel.
4 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
Item NameItem number
carbon steel stainless steel
Square 1000x630, grade1 030067 030167
Square 1000x630, grade2 030068 030168
Square 100x60, grade0 030016 030116
Square 100x60, grade1 030017 030117
Square 100x60, grade2 030018 030118
Square 100x60, grade3 030019 030119
Square 160x100, grade0 030026 030126
Square 160x100, grade1 030027 030127
Square 160x100, grade2 030028 030128
Square 160x100, grade3 030029 030129
Square 160x250, grade0 030036 030136
Square 160x250, grade1 030037 030137
Square 160x250, grade2 030038 030138
Square 160x250, grade3 030039 030139
Square 400x250, grade1 030047 030147
Square 400x250, grade2 030048 030148
MEASURING TOOLS
FRAMING SQUARES, VERNIER CALIPERS
Item NameItem number
carbon steel stainless steel
Square 100x60, grade0 030010 030110
Square 100x60, grade1 030011 030111
Square 100x60, grade2 030012 030112
Square 160x100, grade0 030020 030120
Square 160x100, grade1 030021 030121
Square 160x100, grade2 030022 030122
Square 250x160, grade0 030030 030130
Square 160x250, grade1 030031 030131
Square 160x250, grade2 030032 030132
Square 60x40, grade0 030000 030100
Square 60x40, grade1 030001 030101
Square 60x40, grade2 030002 030102
BEVELED ENDS FRAMING SQUARE
Designed for the 90 degrees angles testing.
- The perpendicular parts arrangement and the surface straightness control ability;
- Measure surfaces beveled ends to facilitate control;
- Can be produced from hardened or stainless steel.
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 5
VERNIER CALIPERS (TYPE 1)
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring
Range
(mm)
Resoluti
on (mm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Item number
Standart Premium
0-125 0,05 17,5 40 14,5 3.3 000100 001100
0-150 0,05 17,5 40 15,5 3.3 000110 001110
0-200 0,05 18,8 50 17 3.3 000120 001120
0-250 0,05 22,8 65 17 3.3 000130 001130
0-250 0,1 22,8 65 17 3.3 000131 001131
0-300 0,05 22,8 65 17 3.5 000140 001140
VERNIER CALIPERS (TYPE 2)
Without depth measuring bar.
With fine adjustment for range 200mm or more.
Made of stainless steel or carbon steel.
Measuring
Range (mm)
Resolution
(mm)A (mm) B (mm) C (mm) Item number
0-250 0,05 22,8 50 17 000230
0-250 0,1 22,8 50 17 000231
MEASURING TOOLS
VERNIER CALIPERS
6 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
VERNIER CALIPERS (TYPE 3)
Suitable for marking, measuring external and internal dimensions.
The ability to manufacture different lengths sponges.
The thin frame installing possibility.
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring
Range (mm)
Resolution
(mm)
A
(mm)
B
mm)
C
(mm)
D
(mm)
E
(mm)
Item number
Standart Premium
0-250 0,05 60 10 10 18,5 40 000330 001330
0-250 0,05 90 10 10 18,5 40 000332 001332
0-250 0,1 60 10 10 18,5 40 000331 001331
0-250 0,1 90 10 10 18,5 40 000333 001333
0-400 0,05 150 10 12 25 50 000350 001350
0-500 0,05 150 10 12 25 50 000360 001360
0-500 0,05 250 10 12 25 50 000362 001362
0-630 0,05 200 10 12 25 50 000370 001370
0-800 0,05 200 20 20 32 56 000380 001380
0-1000 0,1 125 20 20 32 56 000391 001391
0-1000 0,1 150 20 20 32 56 000393 001393
0-1000 0,1 200 20 20 32 56 000395 001395
0-1000 0,05 250 20 20 32 56 000390 001390
0-1600 0,05 125/150 20 20 32 64 000600 001600
0-2000 0,05 150 20 20 52 73 000610 001610
0-2000 0,1 150 20 20 52 73 000611 001611
VERNIER CALIPERS (TYPE 4)
Suitable for marking, measuring external and internal dimensions.
The ability to manufacture different lengths sponges.
The thin frame installing possibility.
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring
Range (mm)
Resolution
(mm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Item number
Standart Premium
0-400 0,05 90/125/150 10 12 23/25 000450/000452/000454 001450/001452/001454
0-400 0,1 90/125/150 10 12 23/25 000451/000453/000455 001451/001453/001455
0-500 0,05 90/125/150 10 12 23/25 000460/000462/000464 001460/001462/001464
0-500 0,1 90/125/150 10 12 23/25 000461/000463/000465 001461/001463/001465
0-630 0,1 90/125/150 10 12 23/25 000471/000473/000475 001471/001473/001475
0-630 0,05 90/125/150 10 12 23/25 000470/000472/000474 001470/001472/001474
0-800 0,1 125/150/200 20 20 30/32 000481/000483/000485 001481/001483/001485
0-800 0,05 125/150/200 20 20 30/32 000480/000482/000484 001480/001482/001484
0-1000 0,05 125/150/200 20 20 30/32 000490/000492/000494 001490/001492/001494
0-1600 0,05 200/250/300 20 20 50 000700/000702/000703 001700/001702/001703
0-1600 0,1 200/250/300 20 20 50 000701/000703/000705 001701/001703/001705
0-2000 0,05 200/250/300 20 20 50 000710/000712/000714 001710/001712/001714
0-2000 0,1 200/250/300 20 20 50 000711/000713/000715 001711/001713/001715
0-3000 0,1 250/300/350 20 20 50 000721/000723/000725 001721/001723/001725
0-3000 0,05 250/300/350 20 20 50 000720/000722/000724 001720/001722/001724
MEASURING TOOLS
VERNIER CALIPERS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 7
VERNIER CALIPERS WITH CARBIDE JAWS (TYPE 1)
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring
Range
(mm)
Resolution
(mm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Item number
Standart Premium
0-125 0,05 17,5 40 14,5 3.3 002100 003100
0-125 0,1 17,5 40 14,5 3.3 002101 003101
0-150 0,05 17,5 40 15,5 3.3 002110 003110
0-300 0,05 22,8 65 17 3.5 002140 003140
VERNIER CALIPERS WITH CARBIDE JAWS (TYPE 2)
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring
Range (mm)
Resolution
(mm)
A
(mm)
B
(mm)
C
(mm)
Item number
Standart Premium
0-250 0,05 22,8 50 17 002230 003230
0-400 0,05 38,5 100 25 002250 003250
0-400 0,1 38,5 100 25 002251 003251
0-500 0,05 38,5 100 25 002260 003260
0-500 0,1 38,5 100 25 002261 003261
0-630 0,05 38,5 100 25 002270 003270
0-630 0,1 38,5 100 25 002271 003271
VERNIER CALIPERS WITH CARBIDE JAWS (TYPE 3)
Suitable for marking, measuring external and internal dimensions.
The ability to manufacture different lengths sponges.
The thin frame installing possibility.
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring
Range
(mm)
Resolution
(mm)A (mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
Item number
Standart Premium
0-400 0,05 150 10 12 25 55 002350 003350
0-500 0,05 150 10 12 25 55 002360 003360
0-600 0,05 200 10 12 25 55 002370 003370
MEASURING TOOLS
DIGITAL CALIPERS
8 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
DIGITAL CALIPERS (TYPE 1)
ON/OFF switch.
mm/in conversion.
ZERO setting.
Capacity system with data output interface.
Large LED display.
Made of stainless steel.
Can measure OD, ID and depth.
With thumb roller.
Accessories: Packing box, battery and user manual.
Measuring Range
(mm/in)Resolution (mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Accuracy
(mm)
Item number
Standart Premium
0-150/6" 0.01/0.0005" 16,5 40 16 4 +/-0.03 004111 005111
0-200/8" 0.01/0.0005" 20 50 16 4 +/-0.03 004121 005121
0-300/12" 0.01/0.0005" 20,5 60 17 4 +/-0.04 004141 005141
DIGITAL CALIPERS (TYPE 2)
Manual power on/off.
Zero setting at any position.
Metric/lnch system conversion at any position.
With data output interface.
Measuring Range (mm/in)Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
Accuracy
(mm)
Item number
Standart Premium
0-250 0.01/0.0005" 60 10 10 17 22 +/-0.03 004231 005231
DIGITAL CALIPERS (TYPE 3)
Big LCD for easy reading.
With step measurement.
With data presetting function.
Absolute measurement and comparison measurement conversion at any position.
Metric/lnch system conversion at any position.
Measuring
Range
(mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Accuracy
(mm)
Item number
Standart Premium
0-400 0.01/0.0005" 60 10 10 25 +/-0.04 004351 005351
0-500 0.01/0.0005" 100/125/150 10 12 25 +/-0.05 004361 005361
0-630 0.01/0.0005" 125/150 10 12 25 +/-0.05 004371 005371
0-1000 0.01/0.0005" 125/150 20 20 32 +/-0.07 004391 005391
0-1600 0.01/0.0005" 125/150 20 20 41.5/52 +/-0.11 004601 005601
0-2000 0.01/0.0005" 150/200/300 20 20 41.5/52 +/-0.14 004611 005611
MEASURING TOOLS
SPECIAL DIGITAL CALIPERS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 9
LONG JAW INSIDE DIGITAL CALIPERS
To measure the deep holes diameter.
Manual power on/off.
Zero setting at any position.
Metric/lnch system conversion at any position.
With data output interface.
Measuring
Range (mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
Accuracy
(mm)
Item
number
15-150/ 0.6-6" 0.01/0.0005" 60 30 16 ±0.04 008611
18-200/ 0.72-8" 0.01/0.0005" 75 36 16 ±0.05 008621
20-300/ 0.8-12" 0.01/0.0005" 90 40 17 ±0.06 008641
22-500/ 0.88-20" 0.01/0.0005" 150 44 25 ±0.10 008661
TUBE DIGITAL CALIPERS
To measure the tube thickness if the tube's diameter is 4mm or more.
Manual power on/off.
Zero setting at any position
Metric/lnch system conversion at any position.
With data output interface.
Measuring
Range (mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
Accuracy
(mm)
Item
number
0-150/6" 0.01/0.0005" 60 30 16 ±0.03 008711
0-200/8" 0.01/0.0005" 70 40 16 ±0.03 008721
0-300/12" 0.01/0.0005" 80 50 17 ±0.04 008741
DIGITAL BRAKE DRUM GAUGES CALIPERS
Manual power on/off.
Zero setting at any position.
Metric/lnch system conversion at any position.
With data output interface.
To measure the wear dimension of the automobile brake drum.
Made of stainless steel.
Measuring Range
(mm/in)Resolution (mm/in) Accuracy (mm)
Item
number
-300/12" 0.01/0.0005" ±0.06 008841
INSIDE GROOVE DIGITAL CALIPERS
Specially designed for measuring inside groove which is hard to reach.
Manual power on/off.
Zero setting at any position.
Metric/lnch system conversion at any position.
With data output interface.
Measuring
Range
(mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
Accuracy
(mm)
Item
number
20(35)-
170/0.8-6.8"0.01/0.0005" 40(70) 25(50) 20(35) 16 1(2) 3(6) ±0.04 (±0.05) 008011
25(40)-
225/1-9"0.01/0.0005" 50(80) 35(60) 25(40) 16 1(2) 4(7) ±0.05 (±0.06) 008021
30(50)-
330/1.2-13"0.01/0.0005" 60(90) 45)(70) 30(50) 17 1.5(20) 5(9) ±0.06 (±0.07) 008041
MEASURING TOOLS
SPECIAL DIGITAL CALIPERS
10 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
DISC BRAKE DIGITAL CALIPERS
To measure the grooves depth on the disc brake.
Manual power on/off.
Zero setting at any position.
Metric/Inch system conversion at any position.
With data output interface.
Measuring
Range (mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
Accuracy
(mm)Item number
0-100/4" 0.01/0.0005" 70 8 13 ±0.03 008201
0-150/6" 0.01/0.0005" 90 10 16 ±0.04 008211
OFFSET DIGITAL CALIPERS
The main scale jaw can be slid up and down to facilitate measurement of
stepped sections.
Manual power on/off.
Zero setting at any position.
Metric/Inch system conversion at any position.
With data output interface.
Measuring
Range (mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Accuracy
(mm)Item number
0-150/6" 0.01/0.0005" 40 77 73 16 ±0.04 008411
0-200/8" 0.01/0.0005" 50 90.5 79.5 16 ±0.05 008421
0-300/12" 0.01/0.0005" 60 102 88 17 ±0.06 008441
OUTSIDE GROOVE DIGITAL CALIPERS
Specially designed for measuring outside groove which is hard to reach.
Manual power on/off.
Zero setting at any position.
Metric/lnch system conversion at any position.
With data output interface.
Measuring
Range
(mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
Accuracy
(mm)Item number
0-150/6” 0.01/0.0005" 40(70) 1(1.5) 2(3) 16 5±0.04
(±0.05)008111
0-200/8” 0.01/0.0005" 50(80) 1.5(2) 2.5(3.5) 16 8±0.05
(±0.06)008121
0-300/12” 0.01/0.0005" 60(90) 1.5(2.5) 3(4) 17 10±0.06
(±0.07)008141
OFFSET DIGITAL CALIPERS
With interchangeable anvils.
Manual power on/off.
Zero setting at any position.
Metric/Inch system conversion at any position.
With data output interface.
Measuring
Range (mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
G
(mm)Item number
0-150/6" 0.01/0.0005" 40 17 30 16 1 2 5 008511
0-200/8" 0.01/0.0005" 50 24 42 16 1,5 2,5 8 008521
0-300/12" 0.01/0.0005" 60 32 50 17 1,5 3 10 008541
MEASURING TOOLS
SPECIAL DIGITAL and VERNIER CALIPERS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 11
CENTER DISTANCE DIGITAL CALIPERS WITH AWL ANXILS
LCD display is easy to read.
Zero setting at any position.
Metric/Inch system conversion at any position.
With data output interface.
With data presetting function.
Absolute measurement and comparison measurement conversion at any position.
Measuring
Range
(mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Accuracy
(mm)
Item
number
20-150 0.01/0.0005" 180 50 16 20 ±0.05 008311
20-200 0.01/0.0005" 180 50 16 20 ±0.06 008321
20-300 0.01/0.0005" 180 50 17 20 ±0.07 008341
20-400 0.01/0.0005" 216,5 61,5 25 20 ±0.09 008351
20-2500 0.01/0.0005" 625 108 48 30 ±0.30 008391
CENTER DISTANCE VERNIER CALIPERS WITH AWL ANXILS
Center distance between two holes can be easily obtained by moving slider.
Center distance between two step holes can be obtained too.
Can be used to measure the diameter of big hole.
With external measurement.
With step measurement.
With carbide tipped awl anvils for scribing.
Measuring
Range
(mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
Accuracy
(mm)
Item
number
20-150 0.01/0.0005" 180 50 16 20 ±0.05 009311
20-200 0.01/0.0005" 180 50 16 20 ±0.06 009321
20-300 0.01/0.0005" 180 50 17 20 ±0.07 009341
20-500 0.01/0.0005" 216,5 61,5 25 20 ±0.09 009361
INSIDE GROOVE VERNIER CALIPERS
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring
Range
(mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
Accuracy
(mm)
Item
number
40-340 0.05mm 95 10 5 17 117 ±0.07 009040
BRAKE BLOCK VERNIER CALIPERS
Made of stainless steel or carbon steel.
Used to measure brake-block or similar products.
Scale and the Vernier are chrome-plated, heat-treated.
Measuring surfaces are hardened.
It can be fixed after operation.
Measuring Range
(mm/in)Resolution (mm/in) A (mm) Accuracy (mm) Item number
40-340 0,02 105 ±0.03 009841
50-550 0,02 150 ±0.03 009861
MEASURING TOOLS
MICROMETERS
12 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
MICROMETERS WITH DIAL INDICATOR
Direct GO/NG judgment for mass-produced parts.
Anvil retracting range: 8 mm.
Carbide measuring faces.
Resolution of micrometer head: 0.01mm (Metric); 0.0001” (Inch).
Resolution of dial indicator: 0.01mm (Metric); 0.0005” (Inch).
Measuring Range
(mm/in)
Resolution
(mm/in)Accuracy (mm) Item number
0-150/6” 0.01/0.0005" ±0.04 (±0.05) 008111
ELECTRONIC DIGITAL INDICATOR
Manual power on/off.Zero setting at any position.Metric/Inch system conversion at any position.With data output interface.
Measuring Range
(mm/in)
Resolution
(mm/in)
A
(mm)
B
(mm)
C
(mm)
Accuracy
(mm)
Item
number
0-10 ±20.0 0.001 42 21 56 016210
0-12,5 ±20.0 0.001 42 21 56 016212
0-10 ±20.0 0.01 42 21 56 016310
0-50 ±50.0 0.01 97.2 39.5 58 016350
SHEET METAL MICROMETERS
A dial is attached to the sleeve for making easy and quick
reading of sheet metal thickness.
Carbide measuring faces.
Measuring Range
(mm/in)
Resolution
(mm/in)Accuracy (mm) Item number
0-15 0,01 ±0.004 027010
0-25 0,01 ±0.004 027020
METRIC DIAL TEST INDICATOR
High quality brass main body, high resistance to magnetism.
Jeweled, vibration-proof, durable.
Pivot ball bearing.
Carbide, jewel or steel ball contact point.
Three dovetails.
Measuring
Range (mm)
Resolution
(mm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
G
(mm)
Accuracy
(mkm)
Item
number
0-0,8 0,01 26 18.5 30 45.8 41.8 6 46.4 ±8.0 017108
TUBE MICROMETERS
For measuring wall thickness of various tubes surfaces.
Carbide-tipped measuring faces.
Measuring Range
(mm)
Resolution
(mm)Accuracy (mm) Item number
0-25 0,001 ±0.003 26001
0-25 0,01 ±0.003 26000
25-50 0,01 ±0.003 26020
MEASURING TOOLS
MICROMETERS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 13
VERTICAL DIAL TEST INDICATOR
High quality brass main body, high resistance to magnetism.
Jeweled, vibration-proof, durable.
Pivot ball bearing.
Carbide, jewel or steel ball contact point.
Three dovetails.
Measuring
Range (mm)
Resolution
(mm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
G
(mm)
Accuracy
(mkm)
Item
number
0-0,8 0,01 51.5 55.5 40 8 6.6 21.7 20.9 ±8.0 017008
OUTSIDE MICROMETERS
Carbide measuring faces. Painted frame.
Resolution: 0.01 mm (Metric); 0.0001" (Inch).
Measuring Range
(mm)
Resolution
(mm)
Accuracy
(mkm)Item number
0-25 0.001 ±4μm 24001
75-100 0.001 ±4μm 24071
100-125 0.01 ±5μm 24100
125-150 0.01 ±5μm 24120
150-175 0.01 ±5μm 24150
175-200 0.01 ±5μm 24170
200-225 0.01 ±5μm 24200
225-250 0.01 ±5μm 24220
225-275 0.01 ±5μm 24222
275-300 0.01 ±5μm 24270
300-400 0.01 ±5μm 24300
400-500 0.01 ±5μm 24400
500-600 0.01 ±5μm 24500
600-700 0.01 ±5μm 24600
700-800 0.01 ±5μm 24700
800-900 0.01 ±5μm 24800
PISTOL-GRIP DIAL BORE GAUGES
Designed to measure the specialized products internal linear dimensions in various
industries.
Exposed metal surfaces have high corrosion resistance.
Measuring mechanism is shockproof.
Measuring surfaces are hardened.
Measuring Range (mm)Resolution
(mm)Accuracy (mkm)
Item
number
0-0,8 0,01 ±8.0 017008
DIGITAL OUTSIDE MICROMETERS
Display data is origin data of absolute measurement after changing battery.
Carbide measuring faces. Painted frame.Measuring Range
(mm)
Resolution
(mm)
Accuracy
(mm)Item number
0-25mm/0-1" 0.01/0.0005" ±0.002 25000
25-50mm/1-2" 0.01/0.0005" ±0.002 25020
50-75mm/2-3" 0.01/0.0005" ±0.003 25050
75-100mm/3-4" 0.01/0.0005" ±0.003 25070
100-125mm/4-5" 0.01/0.0005" ±0.003 25100
125-150mm/5-6" 0.01/0.0005" ±0.003 25120
150-175mm/6-7" 0.01/0.0005" ±0.003 25150
175-200mm/7-8" 0.01/0.0005" ±0.003 25170
MEASURING TOOLS
MICROMETERS
14 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
ELECTRIC THREE POINT INTERNAL MICROMETERS
These bore gauges measuring diameter of holes.
For blind hole or through hole measuring.
With extension rod for deep hole measuring.
With set ring (under 100mm).
Contact points can be either carbide or hardened steel.
ON/OFF… SET button: Switch on/off, and data setting.
In/mm… ABS button: Metric/inch conversion, and data setting.
HOLD button: Data holding and data setting.
Range
(mm)
Grad.
(mm)
Accuracy
(mm)
Setting
rings (mm)
Extension
rods (mm)
Item
number
3~4 0,001 +/-0.004 Φ3 N/A 021003
4~5 0,001 +/-0.004 Φ4 N/A 021004
5~6 0,001 +/-0.004 Φ5 N/A 021005
TYPE 1
Range
(mm)
Grad.
(mm)
Accuracy
(mm)
Setting
rings (mm)
Extension
rods (mm)
Item
number
6~8 0,001 +/-0.004 Φ6 100 021006
8~10 0,001 +/-0.004 Φ8 100 021008
10~12 0,001 +/-0.004 Φ10 150 021010
12~16 0,001 +/-0.004 Φ12 150 021012
16~20 0,001 +/-0.004 Φ16 150 021016
20~25 0,001 +/-0.004 Φ20 150 021020
25~30 0,001 +/-0.004 Φ25 150 021025
30~40 0,001 +/-0.004 Φ30 150 021030
40~50 0,001 +/-0.005 Φ40 150 021040
50~63 0,001 +/-0.005 Φ50 150 021050
62~75 0,001 +/-0.005 Φ62 150 021062
75~88 0,001 +/-0.005 Φ75 150 021075
87~100 0,001 +/-0.005 Φ87 150 021087
TYPE 2
Range
(mm)
Grad.
(mm)
Accuracy
(mm)
Setting
rings (mm)
Extension
rods (mm)
Item
number
6~8 0,001 +/-0.004 Φ6 100 021006
8~10 0,001 +/-0.004 Φ8 100 021008
10~12 0,001 +/-0.004 Φ10 150 021010
12~16 0,001 +/-0.004 Φ12 150 021012
TYPE 3
MEASURING TOOLS
MICROMETERS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 15
DIAL BORE GAUGES
These bore gauges measuring diameter of holes.
Optional extension rods can be attached to measuring deep holes.
Measuring
Range (mm)Grad. (mm)
Accuracy
(mkm)L (mm)
Item number
Standart Premium
6~10 0,01 12μm 40 22200 22500
10~18 0,01 12μm 45 22210 22510
18~35 0,01 15μm 75 22220 22520
18~50 0,01 15μm 75 22222 22522
18~50 0,001 15μm 80 22224 22524
18~50 0,002 15μm 200 22221 22521
35~50 0,01 15μm 200 22230 22530
50~100 0,01 18μm 200 22240 22540
100~160 0,01 18μm 200 22250 22550
160~250 0,01 18μm 300 22260 22560
250~450 0,01 18μm 200 22270 22570
VERNIER HEIGHT GAUGES
Carbide tipped scriber.
With fine adjustment.
Made of stainless steel or carbon steel.
Measuring
Range (mm)Grad. (mm) H (mm) C (mm) Accuracy Item number
0-200 0,05 330 20 ±0.05mm 10000
0-250 0,05 380 20 ±0.06mm 10010
0-300 0,05 430 20 ±0.06mm 10020
0-400 0,05 558 20 ±0.07mm 10030
0-500 0,05 658 25 ±0.07mm 10040
0-600 0,05 758 25 ±0.08mm 10050
0-630 0,05 788 25 ±0.08mm 10060
80-1000 0,05 1205 32 ±0.10mm 10070
DIGITAL HEIGHT GAUGES
Carbide tipped scriber.
With fine adjustment.
Manual power on/off.
Zero setting at any position.
Metric/lnch system conversion at any position.
With data output interface.
Absolute measurement and comparison
measurement conversion at
any position.
With presetting function.
Measuring
Range (mm)Grad. (mm) Accuracy Item number
0-200/8" 0.01/0.0005" ±0.03 10101
0-250/8" 0.01/0.0005" ±0.04 10111
0-300/12" 0.01/0.0005" ±0.04 10121
0-400/12" 0.01/0.0005" ±0.05 10131
0-500/20" 0.01/0.0005" ±0.05 10141
0-600/24" 0.01/0.0005" ±0.05 10151
0-1000/40" 0.01/0.0005" ±0.07 10171
MEASURING TOOLS
MICROMETERS
16 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
VERNIER DEPTH GAUGES
With screw at the back of far end of caliper bar.
Made of stainless steel or carbon steel.
Measuring
Range
(mm)
Grad.
(mm)H (mm) H1 (mm)
Accuracy
(mm)
Item
number
0-150 0,05 102/150 11,5 ±0.05 011000
0-160 0,05 102/150 11,5 ±0.05 011010
0-200 0,05 102/150 11,5 ±0.05 011020
0-250 0,05 102/150 11,5 ±0.06 011030
0-300 0,05 102/150 11,5 ±0.06 011040
0-400 0,05 102/150 11,5 ±0.07 011050
0-600 0,05 102/150 11,5 ±0.08 011060
DIGITAL DEPTH GAUGES
Hardened base and measuring face for depth dimensions
measuring.
Manual power on/off.
Zero setting at any position.
Metric/Inch system conversion at any position.
With data output interface.
Measuring
Range
(mm)
Grad.
(mm)
A
(mm)
B
(mm)
Accuracy
(mm)
Item
number
0-150/6" 0.01/0.0005" 102/150 15,5 ±0.03 11101
0-160/6" 0.01/0.0005" 102/150 15,5 ±0.03 11111
0-200/8" 0.01/0.0005" 102/150 15,5 ±0.03 11121
0-250/8" 0.01/0.0005" 102/150 15,5 ±0.04 11131
0-300/12" 0.01/0.0005" 102/150 15,5 ±0.04 11141
0-400/12" 0.01/0.0005" 102/150 17 ±0.05 11151
0-600/20" 0.01/0.0005" 102/150 17 ±0.06 11161
DEPTH MICROMETERS
Interchangeable rods provide a wide measuring range.
High accuracy interchangeable rods enable that reading
doesn’t have to be reset when changing rods.
Measuring
Range (mm)
Resolution
(mm)
L
(mm)
Accuracy
(mm)
Item
number
0-25 0.01 63 0.004 014000
0-50 0.01 100 0.004 014010
0-200 0.01 100 0.008 014030
MEASURING TOOLS
MICROMETERS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 17
DIAL THICKNESS GAUGES
Various anvils for measuring depth of diversiform material.
Special anvils can be supplied on request.
Measuring Range
(mm)Resolution L (mm)
Accuracy
(mkm)Item number
0-1 0.001 30 ±5μm 13200
0-10 0.01 30 ±0.20μm 13210
DIAL DEPTH GAUGES
Various anvils for measuring
depth of diversiform material.
Special anvils can be supplied
on request.
Measuring Range
(mm)Item number
100 015210
GONIOMETER
Measure internal, external, acute
or obtuse angles.
Material: Carbon steel.
Measuring Range Item number
0-320 ̊ 018001
MICROMETER DIAL INDICATORS
Steel body. Jeweled. Anti-dirty cap. With dial lock screw.
Measuring
Range (mm)
Accuracy
(mkm)Resolution
A
(mm)
B
(mm)
C
(mm)Item number
0-3 ±14.0 0.01 41.5 21 57 016003
0-5 ±16.0 0.01 41.5 21 57 016005
0-10 ±20.0 0.01 41.5 21 57 016010
0-25 ±25.0 0.01 61 21.5 57 016025
0-50 ±40.0 0.01 108 47 57 016050
0-100 ±50.0 0.01 158 47 57 016099
MICROMETER DIAL INDICATORS WITH AN EAR
Steel body. Jeweled. Anti-dirty cap. With dial lock screw. With an ear to fix micrometer.
Measuring
Range
(mm)
Accuracy
(mkm)Resolution
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
G
(mm)Item number
0-3 ±14.0 0.01 41.5 21 57 20 18 6.5/6.35 5 016103
0-5 ±16.0 0.01 41.5 21 57 20 18 6.5/6.35 5 016105
0-10 ±20.0 0.01 41.5 21 57 20 18 6.5/6.35 5 016110
THREAD GAUGES
Material: Carbon steel.
Name Item number
Thread GAUGE 019000
Thread GAUGE 55 019001
MEASURING TOOLS
MICROMETERS
18 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
THREE POINT INTERNAL MICROMETERS
Range 2-6mm without extension rods.
Measurement can be taken closer to the bottom of the blind
bore, and can be taken into a deep hole with an extension
rod.
Highly durable because of carbide-tipped contact points.
Ratchet stop.
Measuring
Range (mm)Grad. (mm) Accuracy (mm)
Setting rings
(mm)Extension rods
A
(mm)
B
(mm)
C
(mm)Item number
3~4 0,001 +/-0.004 Φ3 N/A 1,5 2,5 52 20003
4~5 0,001 +/-0.004 Φ4 N/A 1,5 2,5 52 20004
5~6 0,001 +/-0.004 Φ5 N/A 1,5 2,5 52 20005
6~8 0,001 +/-0.004 Φ6 Φ5.8×100 1,5 2,5 52 20006
8~10 0,001 +/-0.004 Φ8 Φ5.8×100 1,5 2,5 52 20008
10~12 0,001 +/-0.004 Φ10 Φ5.8×100 1,5 2,5 52 20010
12~16 0,005 +/-0.004 Φ11 Φ10.8×100 2 4,5 78 20012
16~20 0,005 +/-0.004 Φ14 Φ10.8×100 2 4,5 78 20016
20~25 0,005 +/-0.004 Φ20 Φ17×150 7 7 82 20020
25~30 0,005 +/-0.004 Φ25 Φ17×150 7 7 82 20025
30~40 0,005 +/-0.004 Φ30 Φ17×150 7 7 82 20030
40~50 0,005 +/-0.005 Φ40 Φ23.5×150 2,5 11 97 20040
50~63 0,005 +/-0.005 Φ50 Φ23.5×150 4 13 100 20050
62~75 0,005 +/-0.005 Φ60 Φ23.5×150 4 13 100 20062
75~88 0,005 +/-0.005 Φ70 Φ23.5×150 4 13 100 20075
87~100 0,005 +/-0.005 Φ80 Φ23.5×150 4 13 100 20087
100~125 0,005 ±0.007 Φ100 Φ23.5×150 4 13 100 20100
100~150 0,005 ±0.007 Φ100 Φ23.5×150 4 13 100 20101
125~150 0,005 ±0.007 Φ125 Φ23.5×150 4 13 100 20125
150~175 0,005 ±0.007 Φ150 Φ23.5×150 4 13 100 20150
150~200 0,005 ±0.007 Φ150 Φ23.5×150 4 13 100 20152
200~225 0,005 ±0.008 Φ200 Φ23.5×150 4 13 100 20200
200~300 0,005 ±0.008 Φ200 Φ23.5×150 4 13 100 20203
225~250 0,005 ±0.008 Φ225 Φ23.5×150 4 13 100 20225
250~275 0,005 ±0.008 Φ250 Φ23.5×150 4 13 100 20250
275~300 0,005 ±0.008 Φ275 Φ23.5×150 4 13 100 20275
MEASURING TOOLS
SPIRIT LEVELS and STEEL RULER
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 19
FRAME LEVEL
Designed to measure vertical and horizontal surfaces deviation.
Resolution
(mm)
Accuracy
(mkm)
A
(mm)
B
(mm)Item number
0.02 ±0.006 150 150 041102
0.05 ±0.015 150 150 041105
0.1 ±0.03 150 150 041110
0.02 ±0.006 200 200 041202
0.05 ±0.015 200 200 041205
0.1 ±0.03 200 200 041210
0.02 ±0.006 250 250 041302
0.05 ±0.015 250 250 041305
0.1 ±0.03 250 250 041310
BLOCK LEVEL
Designed to measure horizontal surfaces deviations.
Resolution
(mm)
Accuracy
(mkm)
A
(mm)
B
(mm)
Item
number
0.02 ±0.006 46 200 040202
0.05 ±0.015 46 200 040205
0.1 ±0.03 46 200 040210
0.02 ±0.006 46 250 040302
0.05 ±0.015 46 250 040305
0.1 ±0.03 46 250 040310
STEEL RULER
Designed for the linear dimensions measuring.
Resolution
(mm)
Accuracy
(mkm)
A
(mm)
B
(mm)
C
(mm)Item number
150 ±0.10 176 18 0.7 043011
200 ±0.10 235 18 0.7 043021
300 ±0.10 338 25 0.8 043031
400 ±0.10 438 26 0.8 043041
500 ±0.15 537 28 0.9 043051
600 ±0.15 638 29 0.9 043061
1000 ±0.20 1038 30 1 043101
1500 ±0.25 1540 40 1.5 043151
2000 ±0.30 2040 40 1.5 043201
2000 ±0.30 2040 40 1.8 043202
MEASURING TOOLS
TRIPODS & BAYS
20 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
MICROMETER STAND
Designed for the clamping micrometers with a
measuring range up to 300
mm and other measuring devices to use it at
the desktop.
- solid metal construction with adjustable
angles;
- robust design for durable use;
- can be used in series production;
- suitable for the micrometers calibrating.
A
(mm)
B
(mm)
C
(mm)Item number
160 90 92 080020
FLEXIBLE STEM MAGNETIC STAND
Intended for the 0.01 mm scale
division measuring
heads installation.
The flexible
columns height
(mm)
The magnetic
base breakout
force (N)
A
(mm)
B
(mm)
C
(mm)
Item
number
360 588 55 63 50 080021
MAGNETIC STAND WITH FINE ADJUSTMENT
Tripod with magnetic base for measuring heads.
The magnetic base allows you to securely attach the tripod on the magnetic material flat
surfaces.
It is equipped with a device for the size fine setting.
The magnetic base breakout
force (N)
A
(mm)
B
(mm)
C
(mm)
Item
number
150 200 160 8
080010
1000 250 200 8
1000 630 500 8
800 225 220 8
MEASURING TOOLS
BUILDING MEASURING
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 21
PROFESSIONAL SPIRIT LEVEL
Professional Heavy Duty Spirit Level.
Aluminum section thickness: 1.7-1.8mm.
Heavy duty aluminum frame for none warp or twist.
Three fixed vials(45.90.180) with professional accuracy 0.5mm/m.6 lines horizontal
vial for angle measuring 1%. 2%.
Double milled bottom work surface for high flatness & part measuring.
Double-color rubberized endcaps for shock resistance & antislip.
Powder coating finish.
Two big hanging holes on end caps for convenient storage.
HPP grade level for professional user, most popular in Europe country.
Dimension
(mm)Magnets Item number
400 Without magnets. 091040
400 With two strong magnets. 091041
600 Without magnets. 091060
600 With two strong magnets. 091061
1000 Without magnets. 091100
1000 With three strong magnets. 091101
1200 Without magnets. 091120
1200 With four strong magnets. 091121
1500 Without magnets. 091150
1500 With six strong magnets. 091151
2000 Without magnets. 091200
2000 With seven strong magnets. 091201
PROFESSIONAL MEASURE TAPE
ABC rubberized casing, tape with a good coverage, is not erasing, don't "creep",
keep well.
Three stoppers.
Dimension (mm) Item number
2m*16mm 090021
3m*16mm 090031
5m*25mm 090052
7.5m*25mm 090072
10m*25mm 090102
20m*13mm 090201
30m*13mm 090301
50m*13mm 090501
DRILL BITS
CONCRETE DRILL BITS
22 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
SDS-PLUS S4
High-grade steel, special heat treatment, tungsten carbide tipped,with 4
slots system SDS-plus.
Use: suitable for drilling plugholes in concrete, brickwork, quarrystone etc.
especially suitable for fastening technique.
D х I х L, mm Item number D х I х L, mm Item number D х I х L, mm Item number
4 х 50 х 110 190400 10 х 160 х 210 190103 18 х 150 х 210 190180
4 х 100 х 160 190401 10 х 200 х 260 190104 18 х 210 х 260 190181
5 х 50 х 110 190500 10 х 250 х 310 190105 18 х 250 х 300 190182
5 х 100 х 160 190051 10 х 390 х 450 190106 18 х 400 х 450 190183
5 х 160 х 210 190502 10 х 550 х 600 190107 18 х 550 х 600 190184
5,5 х 50 х 110 190550 11 х 260 х 310 190110 18 х 950 х 1000 190185
5,5 х 100 х 160 190551 12 х 110 х 160 190120 19 х 210 х 260 190190
5,5 х 160 х 210 190552 12 х 130 х 180 190121 19.5 х 210 х 260 190191
6 х 50 х 110 190600 12 х 160 х 210 190122 20 х 150 х 210 190200
6 х 100 х 160 190601 12 х 210 х 260 190123 20 х 200 х 260 190201
6 х 130 х 180 190602 12 х 260 х 310 190124 20 х 250 х 300 190202
6 х 160 х 210 190603 12 х 350 х 400 190125 20 х 400 х 450 190203
6 х 200 х 260 190604 12 х 400 х 450 190126 20 х 550 х 600 190204
6 х 260 х 310 190605 12 х 550 х 600 190127 20 х 750 х 800 190205
6 х 410 х 460 190606 12 х 750 х 800 190128 20 х 950 х 1000 190206
6,5 х 50 х 110 190650 12 х 950 х 1000 190129 22 х 200 х 260 190220
6,5 х 100 х 160 190651 14 х 100 х 160 190140 22 х 250 х 300 190221
6,5 х 130 х 180 190652 14 х 130 х 180 190141 22 х 400 х 450 190222
6,5 х 150 х 210 190653 14 х 160 х 210 190142 22 х 550 х 600 190223
6,5 х 200 х 260 190654 14 х 200 х 260 190143 22 х 750 х 800 190224
7 х 60 х 110 190700 14 х 260 х 310 190144 22 х 950 х 1000 190225
7 х 100 х 160 190701 14 х 400 х 450 190145 24 х 200 х 260 190240
7 х 160 х 210 190702 14 х 550 х 600 190146 24 х 250 х 300 190241
8 х 60 х 110 190800 14 х 750 х 800 190147 24 х 400 х 450 190242
8 х 100 х 160 190801 14 х 950 х 1000 190148 24 х 550 х 600 190243
8 х 130 х 180 190802 15 х 160 х 210 190150 25 х 200 х 260 190250
8 х 160 х 210 190803 15 х 200 х 260 190151 25 х 250 х 300 190251
8 х 200 х 260 190804 16 х 110 х 160 190160 25 х 400 х 450 190252
8 х 250 х 310 190805 16 х 130 х 180 190161 25 х 550 х 600 190253
8 х 410 х 460 190806 16 х 160 х 210 190162 26 х 200 х 260 190260
9 х 100 х 160 190901 16 х 200 х 260 190163 26 х 250 х 300 190261
9 х 160 х 210 190902 16 х 250 х 300 190164 26 х 400 х 450 190262
9,5 х 160 х 210 190950 16 х 400 х 450 190165 28 х 400 х 450 190280
10 х 60 х 110 190100 16 х 550 х 600 190166 30 х 400 х 450 190300
10 х 100 х 160 190101 16 х 750 х 800 190167
10 х 130 х 180 190102 16 х 950 х 1000 190168
DRILL BITS
METAL DRILL BITS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 23
STRAIGHT SHANK DRILL HSS
DIN 338 split point angle: 135°.
Use: especially suitable for deep hole drilling and for work with drill bushes, for
steel and steel cast, alloyed and unalloyed up to approximately 900 N/mm, grey
cast iron, malleable cast iron, spheroidal-graphite cast iron, die-cast iron,
sintered iron, graphite, alloyed aluminum shortchip, bronze, brass tough.
Diameter,
mm
6542 4341 4241
roll forged full ground half ground roll forged full ground half ground roll forged full ground half ground
1.0 106010 108010 107010 103010 105010 104010 100010 102010 101010
1.5 106015 108015 107015 103015 105015 104015 100015 102015 101015
2 106020 108020 107020 103020 105020 104020 100020 102020 101020
2.5 106025 108025 107025 103025 105025 104025 100025 102025 101025
3 106030 108030 107030 103030 105030 104030 100030 102030 101030
3.2 106032 108032 107032 103032 105032 104032 100032 102032 101032
3.5 106035 108035 107035 103035 105035 104035 100035 102035 101035
4 106040 108040 107040 103040 105040 104040 100040 102040 101040
4.5 106045 108045 107045 103045 105045 104045 100045 102045 101045
5 106050 108050 107050 103050 105050 104050 100050 102050 101050
5.5 106055 108055 107055 103055 105055 104055 100055 102055 101055
6 106060 108060 107060 103060 105060 104060 100060 102060 101060
6.5 106065 108065 107065 103065 105065 104065 100065 102065 101065
7 106070 108070 107070 103070 105070 104070 100070 102070 101070
7.5 106075 108075 107075 103075 105075 104075 100075 102075 101075
8 106080 108080 107080 103080 105080 104080 100080 102080 101080
8.5 106085 108085 107085 103085 105085 104085 100085 102085 101085
9 106090 108090 107090 103090 105090 104090 100090 102090 101090
9.5 106095 108095 107095 103095 105095 104095 100095 102095 101095
10 106100 108100 107100 103100 105100 104100 100100 102100 101100
10.5 106105 108105 107105 103105 105105 104105 100105 102105 101105
11 106110 108110 107110 103110 105110 104110 100110 102110 101110
11.5 106115 108115 107115 103115 105115 104115 100115 102115 101115
12 106120 108120 107120 103120 105120 104120 100120 102120 101120
12.5 106125 108125 107125 103125 105125 104125 100125 102125 101125
13 106130 108130 107130 103130 105130 104130 100130 102130 101130
13,5 106135 108135 107135 103135 105135 104135 100135 102135 101135
14 106140 108140 107140 103140 105140 104140 100140 102140 101140
14,5 106145 108145 107145 103145 105145 104145 100145 102145 101145
15 106150 108150 107150 103150 105150 104150 100150 102150 101150
15,5 106155 108155 107155 103155 105155 104155 100155 102155 101155
16 106160 108160 107160 103160 105160 104160 100160 102160 101160
16,5 106165 108165 107165 103165 105165 104165 100165 102165 101165
17 106170 108170 107170 103170 105170 104170 100170 102170 101170
17,5 106175 108175 107175 103175 105175 104175 100175 102175 101175
18 106180 108180 107180 103180 105180 104180 100180 102180 101180
18,5 106185 108185 107185 103185 105185 104185 100185 102185 101185
19 106190 108190 107190 103190 105190 104190 100190 102190 101190
19,5 106195 108195 107195 103195 105195 104195 100195 102195 101195
20 106200 108200 107200 103200 105200 104200 100200 102200 101200
DRILL BITS
METAL DRILL BITS
24 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
HSS-COBALT (5%) -TWIST DRILL
High-grade steel, special heat treatment, tungsten carbide tipped,with 4 slots
system SDS-plus.
Use: suitable for drilling plugholes in concrete, brickwork, quarrystone etc.
especially suitable for fastening technique.
Diameter, mm Item number Diameter, mm Item number
1.0 122010 7.5 122075
1.5 122015 8.0 122080
2.0 122020 8.5 122085
2.5 122025 9.0 122090
3.0 122030 9.5 122095
3.2 122032 10.0 122100
3.5 122035 10.5 122105
4.0 122040 11.0 122110
4.2 122042 11.5 122115
4.5 122045 12 122120
5.0 122050 12.5 122125
5.2 122052 13.0 122130
5.5 122055 13.5 122135
6.0 122060 14 122140
6.5 122065 15 122150
7.0 122070
D x I x L, mm4241 half
ground
4341 half
ground
6542 half
groundD x I x L, mm
4241 half
ground
4341 half
ground
6542 half
ground
2X170X220 131020 134020 137020 6X170X220 131060 134060 137060
2.5X170X220 131025 134025 137025 6.5X170X220 131065 134065 137065
3X170X220 131030 134030 137030 7X170X220 131070 134070 137070
3.2X170X220 131032 134032 137032 7.5X170X220 131075 134075 137075
3.3X170X220 131033 134033 137033 8X170X220 131080 134080 137080
3.5X170X220 131035 134035 137035 8.5X170X220 131085 134085 137085
3.8X170X220 131038 134038 137038 9X170X220 131090 134090 137090
4x170x220 131040 134040 137040 10X170X220 131100 134100 137100
4.2X170X220 131042 134042 137042 12X170X220 131120 134120 137120
4.5X170X220 131045 134045 137045 13X170X220 131130 134130 137130
5x170x220 131050 134050 137050 14x170x220 131140 134140 137140
5.5X170X220 131055 134055 137055
EXTRA LENGTH HSS STRAIGHT SHANK DRILL ( HSS-EXT)
Point angle: 135°.
Use: suitable for drilling very deep holes in brick, brickwork etc. For steel and steel
cast, alloyed and unalloyed up to approximately 900 N/mm, grey cast iron, malleable
cast iron, spheroidal-graphite cast iron, die-cast iron, sintered iron, graphite, alloyed
aluminium shortchip, bronze etc.
DRILL BITS
METAL DRILL BITS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 25
STRAIGHT SHANK DRILL HSS TITAN COVER
DIN 338 split point angle: 135°. With a titan cover.
Use: especially suitable for deep hole drilling and for work with drill bushes, for
steel and steel cast, alloyed and unalloyed up to approximately 900 N/mm, grey
cast iron, malleable cast iron, spheroidal-graphite cast iron, die-cast iron,
sintered iron, graphite, alloyed aluminum shortchip, bronze, brass tough.
Diameter, mm
6542 4341 4241
full ground half ground full ground half ground full ground half ground
1.0 112010 111010 115010 114010 118010 117010
1.5 112015 111015 115015 114015 118015 117015
2 112020 111020 115020 114020 118020 117020
2.5 112025 111025 115025 114025 118025 117025
3 112030 111030 115030 114030 118030 117030
3.2 112032 111032 115032 114032 118032 117032
3.5 112035 111035 115035 114035 118035 117035
4 112040 111040 115040 114040 118040 117040
4.5 112045 111045 115045 114045 118045 117045
5 112050 111050 115050 114050 118050 117050
5.5 112055 111055 115055 114055 118055 117055
6 112060 111060 115060 114060 118060 117060
6.5 112065 111065 115065 114065 118065 117065
7 112070 111070 115070 114070 118070 117070
7.5 112075 111075 115075 114075 118075 117075
8 112080 111080 115080 114080 118080 117080
8.5 112085 111085 115085 114085 118085 117085
9 112090 111090 115090 114090 118090 117090
9.5 112095 111095 115095 114095 118095 117095
10 112100 111100 115100 114100 118100 117100
10.5 112105 111105 115105 114105 118105 117105
11 112110 111110 115110 114110 118110 117110
11.5 112115 111115 115115 114115 118115 117115
12 112120 111120 115120 114120 118120 117120
12.5 112125 111125 115125 114125 118125 117125
13 112130 111130 115130 114130 118130 117130
13,5 112135 111135 115135 114135 118135 117135
14 112140 111140 115140 114140 118140 117140
14,5 112145 111145 115145 114145 118145 117145
15 112150 111150 115150 114150 118150 117150
15,5 112155 111155 115155 114155 118155 117155
16 112160 111160 115160 114160 118160 117160
16,5 112165 111165 115165 114165 118165 117165
17 112170 111170 115170 114170 118170 117170
17,5 112175 111175 115175 114175 118175 117175
18 112180 111180 115180 114180 118180 117180
18,5 112185 111185 115185 114185 118185 117185
19 112190 111190 115190 114190 118190 117190
19,5 112195 111195 115195 114195 118195 117195
20 112200 111200 115200 114200 118200 117200
DRILL BITS
METAL DRILL BITS
26 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
TAPER SHANK TWIST DRILL HSS
DIN 345 split point angle: 135°. High-speed steel.
Use: powerful, solid standard drill with morse taper shank, suitable
for steel and cast steel, alloyed and unalloyed up to approx.
900 N/mm, for grey cast iron, malleable cast iron, spheroidal-
graphite cast iron, sintered iron, graphite.
Diameter,
mm
4241 4341 6542Diameter,
mm
4241 4341 6542Diameter,
mm
4241 4341 6542
roll
forged
half
ground
roll
forged
half
ground
half
ground
roll
forged
half
ground
roll
forged
half
ground
half
ground
roll
forged
half
ground
roll
forged
half
ground
half
ground
6 150060 151060 153060 154060 157060 23.75 150238 151238 153238 154238 157238 44.5 150445 151445 153445 154445 157445
6.5 150065 151065 153065 154065 157065 24 150240 151240 153240 154240 157240 44.75 150448 151448 153448 154448 157448
6.8 150068 151068 153068 154068 157068 24.25 150243 151243 153243 154243 157243 45 150450 151450 153450 154450 157450
7 150070 151070 153070 154070 157070 24.5 150245 151245 153245 154245 157245 45.5 150455 151455 153455 154455 157455
7.5 150075 151075 153075 154075 157075 24.75 150248 151248 153248 154248 157248 46 150460 151460 153460 154460 157460
7.8 150078 151078 153078 154078 157078 25 150250 151250 153250 154250 157250 46.5 150465 151465 153465 154465 157465
8 150080 151080 153080 154080 157080 25.25 150253 151253 153253 154253 157253 47 150470 151470 153470 154470 157470
8.2 150082 151082 153082 154082 157082 25.5 150255 151255 153255 154255 157255 47.5 150475 151475 153475 154475 157475
8.5 150085 151085 153085 154085 157085 25.75 150258 151258 153258 154258 157258 48 150480 151480 153480 154480 157480
8.8 150088 151088 153088 154088 157088 26 150260 151260 153260 154260 157260 48.5 150485 151485 153485 154485 157485
9 150090 151090 153090 154090 157090 26.25 150263 151263 153263 154263 157263 49 150490 151490 153490 154490 157490
9.2 150092 151092 153092 154092 157092 26.5 150265 151265 153265 154265 157265 49.5 150495 151495 153495 154495 157495
9.5 150095 151095 153095 154095 157095 26.75 150268 151268 153268 154268 157268 50 150500 151500 153500 154500 157500
9.8 150098 151098 153098 154098 157098 27 150270 151270 153270 154270 157270 51 150510 151510 153510 154510 157510
10 150100 151100 153100 154100 157100 27.25 150273 151273 153273 154273 157273 52 150520 151520 153520 154520 157520
10.2 150102 151102 153102 154102 157102 27.5 150275 151275 153275 154275 157275 53 150530 151530 153530 154530 157530
10.5 150105 151105 153105 154105 157105 27.75 150278 151278 153278 154278 157278 54 150540 151540 153540 154540 157540
10.8 150108 151108 153108 154108 157108 28 150280 151280 153280 154280 157280 55 150550 151550 153550 154550 157550
11 150110 151110 153110 154110 157110 28.25 150283 151283 153283 154283 157283 56 150560 151560 153560 154560 157560
11.2 150112 151112 153112 154112 157112 28.5 150285 151285 153285 154285 157285 57 150570 151570 153570 154570 157570
11.5 150115 151115 153115 154115 157115 28.75 150288 151288 153288 154288 157288 58 150580 151580 153580 154580 157580
11.8 150118 151118 153118 154118 157118 29 150290 151290 153290 154290 157290 59 150590 151590 153590 154590 157590
12 150120 151120 153120 154120 157120 29.25 150293 151293 153293 154293 157293 60 150600 151600 153600 154600 157600
12.2 150122 151122 153122 154122 157122 29.5 150295 151295 153295 154295 157295 61 150610 151610 153610 154610 157610
12.5 150125 151125 153125 154125 157125 29.75 150298 151298 153298 154298 157298 62 150620 151620 153620 154620 157620
12.8 150128 151128 153128 154128 157128 30 150300 151300 153300 154300 157300 63 150630 151630 153630 154630 157630
13 150130 151130 153130 154130 157130 30.25 150303 151303 153303 154303 157303 64 150640 151640 153640 154640 157640
13.2 150132 151132 153132 154132 157132 30.5 150305 151305 153305 154305 157305 65 150650 151650 153650 154650 157650
13.5 150135 151135 153135 154135 157135 30.75 150308 151308 153308 154308 157308 66 150660 151660 153660 154660 157660
13.8 150138 151138 153138 154138 157138 31 150310 151310 153310 154310 157310 67 150670 151670 153670 154670 157670
14 150140 151140 153140 154140 157140 31.25 150313 151313 153313 154313 157313 68 150680 151680 153680 154680 157680
14.25 150143 151143 153143 154143 157143 31.5 150315 151315 153315 154315 157315 69 150690 151690 153690 154690 157690
14.5 150145 151145 153145 154145 157145 31.75 150318 151318 153318 154318 157318 70 150700 151700 153700 154700 157700
14.75 150148 151148 153148 154148 157148 32 150320 151320 153320 154320 157320 71 150710 151710 153710 154710 157710
15 150150 151150 153150 154150 157150 32.25 150323 151323 153323 154323 157323 72 150720 151720 153720 154720 157720
15.25 150153 151153 153153 154153 157153 32.5 150325 151325 153325 154325 157325 73 150730 151730 153730 154730 157730
15.5 150155 151155 153155 154155 157155 32.75 150328 151328 153328 154328 157328 74 150740 151740 153740 154740 157740
16 150160 151160 153160 154160 157160 33 150330 151330 153330 154330 157330 75 150750 151750 153750 154750 157750
16.25 150163 151163 153163 154163 157163 33.25 150333 151333 153333 154333 157333 76 150760 151760 153760 154760 157760
16.5 150165 151165 153165 154165 157165 33.5 150335 151335 153335 154335 157335 77 150770 151770 153770 154770 157770
16.75 150168 151168 153168 154168 157168 33.75 150338 151338 153338 154338 157338 78 150780 151780 153780 154780 157780
17 150170 151170 153170 154170 157170 34 150340 151340 153340 154340 157340 79 150790 151790 153790 154790 157790
17.25 150173 151173 153173 154173 157173 34.25 150343 151343 153343 154343 157343 80 150800 151800 153800 154800 157800
17.5 150175 151175 153175 154175 157175 34.5 150345 151345 153345 154345 157345 81 150810 151810 153810 154810 157810
17.75 150178 151178 153178 154178 157178 34.75 150348 151348 153348 154348 157348 82 150820 151820 153820 154820 157820
18 150180 151180 153180 154180 157180 35 150350 151350 153350 154350 157350 83 150830 151830 153830 154830 157830
18.25 150183 151183 153183 154183 157183 35.5 150355 151355 153355 154355 157355 84 150840 151840 153840 154840 157840
18.5 150185 151185 153185 154185 157185 37 150370 151370 153370 154370 157370 85 150850 151850 153850 154850 157850
18.75 150188 151188 153188 154188 157188 37.5 150375 151375 153375 154375 157375 86 150860 151860 153860 154860 157860
19 150190 151190 153190 154190 157190 38 150380 151380 153380 154380 157380 87 150870 151870 153870 154870 157870
19.25 150193 151193 153193 154193 157193 38.5 150385 151385 153385 154385 157385 88 150880 151880 153880 154880 157880
19.5 150195 151195 153195 154195 157195 39 150390 151390 153390 154390 157390 89 150890 151890 153890 154890 157890
19.75 150198 151198 153198 154198 157198 39.5 150395 151395 153395 154395 157395 90 150900 151900 153900 154900 157900
20 150200 151200 153200 154200 157200 40 150400 151400 153400 154400 157400 91 150910 151910 153910 154910 157910
20.25 150203 151203 153203 154203 157203 40.5 150405 151405 153405 154405 157405 92 150920 151920 153920 154920 157920
20.5 150205 151205 153205 154205 157205 41 150410 151410 153410 154410 157410 93 150930 151930 153930 154930 157930
20.75 150208 151208 153208 154208 157208 41.5 150415 151415 153415 154415 157415 94 150940 151940 153940 154940 157940
21 150210 151210 153210 154210 157210 42 150420 151420 153420 154420 157420 95 150950 151950 153950 154950 157950
21.25 150213 151213 153213 154213 157213 42.5 150425 151425 153425 154425 157425 96 150960 151960 153960 154960 157960
21.5 150215 151215 153215 154215 157215 43 150430 151430 153430 154430 157430 97 150970 151970 153970 154970 157970
22 150220 151220 153220 154220 157220 43.25 150433 151433 153433 154433 157433 98 150980 151980 153980 154980 157980
22.5 150225 151225 153225 154225 157225 43.5 150435 151435 153435 154435 157435 99 150990 151990 153990 154990 157990
23 150230 151230 153230 154230 157230 43.75 150438 151438 153438 154438 157438 100 150999 151999 153999 154999 157999
23.25 150233 151233 153233 154233 157233 44 150440 151440 153440 154440 157440
23.5 150235 151235 153235 154235 157235 44.25 150443 151443 153443 154443 157443
DRILL BITS
WOOD DRILL BITS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 27
WOOD WORKING DRILL BITS
BLACK FLUTE AND WHITE EDGE, Ground center point with 2 cutting edges, cutting
form B, shank cylindrical. Material: carbon steel 45''.
Use: in portable and stationary drilling machines for drilling exact splinter proof
holes in soft and hardwood, plywood, veneer, chipboard, hardboard etc.
Diameter x The total length of the
drill, mmItem number
Diameter x The total length of the
drill, mmItem number
3 X 60 170003 12 X 140 170012
4 X 75 170004 13 X 140 170013
5 X 85 170005 14 X 150 170014
6 X 92 170006 15 X 150 170015
7 X 100 170007 16 x 160 170016
8 X 110 170008 18 X 160 170018
9 X 115 170009 20 X 180 170020
10 X 115 170010 22 X 180 170022
11 X 120 170011 24 X 200 170024
WOOD AUGER BITS
With self-centring threaded tip, 1 raised lip and 1 cutting edge.
Use: for precision drilling in hard- and softwood as well as endtimber.
Diameter X The
total length, mm
Item numberDiameter X The
total length, mm
Item number
Carbon steel
45"Tin coated
Carbon steel
45"Tin coated
6 X 230 172206 173206 20 X 460 172420 173420
8 X 230 172208 173208 22 X 460 172422 173422
10 X 230 172210 173210 24 X 460 172424 173424
12 X 230 172212 173212 26 X 460 172426 173426
14 X 230 172214 173214 28 X 460 172428 173428
16 X 230 172216 173216 30 X 460 172430 173430
18 X 230 172218 173218 32 X 460 172432 173432
20 X 230 172220 173220 6 X 600 172606 173606
22 X 230 172222 173222 8 X 600 172608 173608
24 X 230 172224 173224 10 X 600 172610 173610
26 X 230 172226 173226 12 X 600 172612 173612
28 X 230 172228 173228 14 X 600 172614 173614
30 X 230 172230 173230 16 X 600 172616 173616
32 X 230 172232 173232 18 X 600 172618 173618
6 X 460 172406 173406 20 X 600 172620 173620
8 X 460 172408 173408 22 X 600 172622 173622
10 X 460 172410 173410 24 X 600 172624 173624
12 X 460 172412 173412 26 X 600 172626 173626
14 X 460 172414 173414 28 X 600 172628 173628
16 X 460 172416 173416 30 X 600 172630 173630
18 X 460 172418 173418 32 X 600 172632 173632
DRILL BITS
WOOD DRILL BITS
28 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
WOOD FLAT BITS
Use: for drilling accurate, splinter-free holess in soft wood, playwood
and hardwood.
Diameter X The total
length, mm
Item numberDiameter X The total
length, mm
Item number
Carbon steel
45"Tin coated Carbon steel 45" Tin coated
6 х 150 174006 175006 18 х 150 174018 175018
7 х 150 174007 175007 20 х 150 174020 175020
8 х 150 174008 175008 22 х 150 174022 175022
9 х 150 174009 175009 25 х 150 174025 175025
10 х 150 174010 175010 28 х 150 174028 175028
11 х 150 174011 175011 32 х 150 174032 175032
12 х 150 174012 175012 35 х 151 174035 175035
14 х 150 174014 175014 40 х 150 174040 175040
16 х 150 174016 175016
FORSTNER BITS
With 2 main cutting edges, peripheral cutting edge and centre
point. Good cutting capacity and chip removal, exact cutting
geometry, only right-hand cutting. Cylindrical shank.
Use: for clean, perfect and accurately sized boreholes in soft- and
hardwood as well as veneer plywood (also for marginal boreholes).
Especially suitable for hand drills.
Diameter X The total
length, mm
Item number Diameter X The total
length, mm
Item number
Carbon steel 45" Tin coated Carbon steel 45" Tin coated
10 X 90 176010 177010 28 X 90 176028 177028
12 X 90 176012 177012 30 X 90 176030 177030
14 x 90 176014 177014 32 X 90 176032 177032
15 X 90 176015 177015 34 X 90 176034 177034
16 X 90 176016 177016 35 X 90 176035 177035
18 X 90 176018 177018 36 X 90 176036 177036
20 X 90 176020 177020 38 X 90 176038 177038
22 X 90 176022 177022 40 X 90 176040 177040
24 X 90 176024 177024 45 X 90 176045 177045
25 X 90 176025 177025 50 X 90 176050 177050
26 X 90 176026 177026
CENTER BITS
A type - without safety cone.
You can center the hole and remove the chamfer at the same time.
In comparing to spiral it is shorter and therefore more rigid.
It doesn't sways during centering.
Diameter, mm Item number Diameter, mm Item number
1.0 178010 3.15 178031
1.6 178016 4.0 178040
2.0 178020 5.0 178050
2.5 178025 6.3 178063
GRINDING & CUTTING
BRUSHES
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 29
KNOTTED WIRE WHEEL BRUSH
Designed to handle a variety of surfaces using a power tool.
Highly efficient tool for use in heavy duty cleaning. These lattice remove slag,
rust, scale and all kinds of contaminants.
Used on angle grinders.
Dimensions, mm Item number
125 29013
CRIMPED WIRE WHEEL BRUSH
Designed to handle a variety of surfaces using a power tool.
For light and medium works to remove rust and burrs.
Is used on angle grinders.
Dimensions, mm Item number
125 29003
KNOTTED WIRE CUP BRUSH
Highly effective tool to use in hard work of cleaning and for large surfaces.
These brushes remove slag, rust, scale and all kinds of contaminants.
Dimensions, mm Item number
75 29031
100 29032
CRIMPED WIRE CUP BRUSH
Designed to handle a variety of surfaces using an angle grinder.
For the light rust and burrs removing.
Dimensions, mm Item number
75 29021
100 29022
GRINDING & CUTTING
DIAMOND BLADES & CUPS
30 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
TURBO SAW BLADE
Diamond blade for the stone, brick and concrete cutting.
Dimensions, mm Item number
125 27031
230 27033
CONTINUOUS RIM SAW BLADE
Diamond blade for the tile and brick cutting.
Dimensions, mm Item number
125 27051
230 27053
SEGMENTED SAW BLADE
Diamond blade for the concrete and brick cutting.
Dimensions, mm Item number
125 27041
230 27043
350 27044
400 27045
SEGMENTED TURBO DIAMOND CUP
It is designed to provide an excellent, economical, way for finishing variety of ultra hard
materials such as granite, marble, agate, jasper, concrete, stone and other materials. Fast
removal for stone, concrete an other ultra hard materials. Leaves minimal swirl marks.
Outer diameter Arbor size Segment
dimension
Segment
numberArticle #
Inches Metric (mm) Inches Metric (mm)
4.5" 115 7/8" 22.23 25 × 7 × 5/8 9/18 27000
5" 125 7/8" 22.23 25 × 7 × 5/8 9/18 27001
7.1" 180 7/8" 22.23 25 × 8 × 5/8 12/18/24 27002
9" 230 7/8" 22.23 29 × 7 × 5/8 18/24/32 27003
DOUBLE RAW DIAMOND CUP
It is designed to provide an excellent, economical, way to grind a variety of hard materials
such as granite, marble, agate, jasper, concrete, stone and other materials. Use double row
grinding wheels for the finer finishing.
Outer diameter Arbor size Segment
dimension
Segment
numberArticle #
Inches Metric (mm) Inches Metric (mm)
4.5" 115 7/8" 22.23 30 × 5 × 7.2 18 27010
5" 125 7/8" 22.23 30 × 5 × 7.2 20 27011
7.1" 180 7/8" 22.23 30 × 5 × 7.2 26 27012
9" 230 7/8" 22.23 32 × 5 × 7.2 36 27013
GRINDING & CUTTING
PIPE DIES
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 31
STRAIGHT PIPE DIES
For the pipe cylindrical screw cutting.
Dimensions,
inchd, mm L, mm I, mm
Item
number
1/4" 13,16 38 10 245014
1/8" 9,73 30 8 245018
3/4" 26,41 55 16 245034
1" 33,25 65 18 245100
11/2" 47,81 90 22 245112
2" 59,61 105 22 245200
CIRCULAR SCREWING DIES
For the pipe cylindrical screw cutting.
d, mm Groove step, mm D, mm L, mm Item number
4 0,7 20 5 220407
5 0,8 20 7 220508
6 1,0 20 7 220610
8 1,25 25 9 220812
10 1,5 30 11 221015
12 1,75 38 14 221217
14 2,0 38 14 221420
16 2,0 38 18 221620
18 2,5 45 18 221825
20 2,5 45 18 222025
22 2,5 45 22 222225
24 3,0 55 22 222430
30 3,5 65 25 223035
36 4,0 65 25 223640
42 4,5 75 30 224245
GRINDING & CUTTING
PIPE TAPS
32 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
CONICAL PIPE TAPS
For the conical inch screw cutting.Dimensions,
inchd, mm L, mm I, mm
Item
number
1/8" 10,7 55 18 240018
1/4" 14,1 65 24 240014
3/8" 17,7 75 26 240038
1/2" 21,8 85 30 240012
3/4" 27,3 95 32 240034
NUT TAPS
Nut taps with straight shank. For the metric
screw cutting.
Dimensions,
inchd, mm L, mm I, mm
Item
number
6 1 120 20 246061
8 1,25 140 25 246081
10 1,5 140 30 246101
STRAIGHT PIPE TAPS
For the pipe cylindrical screw cutting.
Dimensions,
inchd, mm L, mm I, mm
Item
number
1/2" 20,995 125 32 244012
3/4" 26,412 135 32 244034
3/8" 16,662 100 25 244038
1 1/2" 47,805 160 40 244112
1 1/4" 41,91 160 40 244114
1" 33,249 140 40 244100
2" 59,614 195 40 244200
TAPER PIPE TAPS
For the pipe taper screw cutting.
Dimensions,
inchd, mm L, mm I, mm
Item
number
1/8" 9,729 55 18 242018
3/4" 20,442 85 40 242034
GRINDING & CUTTING
PIPE TAPS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 33
MACHINE AND HAND TAPS
Metric screw cutting for the through holes.
D, mmGroove
step, mmL, mm I, mm
Item
numberD, mm
Groove
step, mmL, mm I, mm
Item
number
3 0,5 48 11 210305 16 1,0 90 29 211610
4 0,7 53 13 210407 16 1,5 102 32 211615
5 0,8 58 16 210508 16 2,0 102 32 211620
6 1,0 66 19 210610 18 1,5 104 29 211815
8 1,0 69 19 210810 18 2,0 112 37 211820
8 1,25 72 22 210812 18 2,5 112 37 211825
10 1,0 76 20 211010 20 1,5 104 29 212015
10 1,5 80 24 211015 20 2,0 112 37 212020
12 1,0 84 24 211210 20 2,5 112 37 212025
12 1,25 84 24 211212 22 1,5 113 33 212215
12 1,5 89 29 211215 22 2,5 118 38 212225
12 1,75 89 29 211217 24 3,0 130 45 212430
14 1,0 84 24 211410 27 3,0 135 45 212730
14 1,25 90 25 211412 30 3,5 138 48 213035
14 1,5 95 30 211415 33 3,5 151 51 213335
14 2,0 95 30 211420 36 4,0 162 57 213640
MACHINE AND HAND TAPS SET
Metric screw cutting for the through holes.
D, mmGroove
step, mmL, mm I, mm
Item
numberD, mm
Groove
step, mmL, mm I, mm
Item
number
4 0,7 53 13 230407 16 2,0 102 32 231620
5 0,8 58 16 230508 18 1,5 104 29 231815
6 1,0 66 19 230610 18 2,5 112 37 231825
8 1,0 69 19 230810 20 1,5 104 29 232015
8 1,25 72 22 230812 20 2,5 112 37 232025
10 1 76 20 231012 22 1,5 113 33 232215
10 1,5 80 24 231015 24 3,0 130 45 232430
12 1,75 89 29 231217 27 3,0 135 45 232730
14 2,0 95 30 231420 30 3,5 138 48 233035
16 1,5 102 32 231615 36 4,0 162 57 233640
CARPENTER TOOLS
HAMMERS, CHISEL AND BOLT CUTTER
34 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
AMERICAN TYPE CLAW HAMMER WITH FIBERGLASS HANDLE
Fiberglass handle.
Weight, g Item number
450 35114
600 35116
BRITISH TYPE CLAW HAMMER WITH ONE PIECE HANDLE
Whole metal body.
Weight, g Item number
450 35104
600 35106
STONING HAMMER WITH FIBERGLASS HANDLE
Fiberglass handle.
Weight, kg Item number
1 35801
2 35802
3 35803
4 35804
5 35805
8 35808
MACHINIST HAMMER WITH FIBERGLASS HANDLE
Fiberglass handle.
Weight, g Item number
200 35002
500 35005
600 35006
800 35008
1000 35010
1500 35015
2000 35020
ROOFING HAMMER WITH FIBERGLASS HANDLE
Fiberglass handle.
Weight, g Item number
600 35136
ROOFING HAMMER WITH ONE PIECE HANDLE
Whole metal body.
Weight, g Item number
600 35126
GARDEN PICKAXE
Fiberglass handle.
Weight, g Item number
600 35136
Fiberglass handle.
Weight, g Item number
600 35136
COLD CHISEL
BOLT CUTTER
Dimensions, mm Item number
450 30004
600 30006
750 30007
900 30009
It is designed to cut bolts, locks, steel chain links and fencing.
GRINDING & CUTTING
FILES & RASPS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 35
ROUND CHAIN SAW FILE
Double cut. Chain saw file.
Diameter, mm Item number
4.0 31227
4.8 31228
5,0 31229
FEATHER EDGE FILE
Single cut. Saw file.
Diameter, mm Item number
150 31517
ROUND FILE
Bastard cut. Second cut.
Smooth cut. Double cut.
Engineer's file.
Dimensions, mm Bastard Second Smooth
150 31211 31212 31213
200 31221 31222 31223
250 31231 31232 31233
300 31241 31242 31243
350 31251 31252 31253
400 31261 31262 31263
SQUARE FILE
Bastard cut. Second
cut. Smooth cut. Double
cut. Engineer's file.
Dimensions, mm Bastard Second Smooth
150 31111 31112 31113
200 31121 31122 31123
250 31131 31132 31133
300 31141 31142 31143
350 31151 31152 31153
400 31161 31162 31163
HALF-ROUND FILE
Bastard cut. Second cut.
Smooth cut. Double cut.
Engineer's file.
Dimensions, mm Bastard Second Smooth
150 31411 31412 31413
200 31421 31422 31423
250 31431 31432 31433
300 31441 31442 31443
350 31451 31452 31453
400 31461 31462 31463
FLAT FILE
Designed for the general
purposes.
Dimensions, mm Bastard Second Smooth
150 31311 31312 31313
200 31321 31322 31323
250 31331 31332 31333
300 31341 31342 31343
350 31351 31352 31353
400 31361 31362 31363
TRIANGULAR FILE
Single cut. Saw file.
Dimensions, mm Bastard Second Smooth
150 31011 31012 31013
200 31021 31022 31023
250 31031 31032 31033
300 31041 31042 31043
NEEDLE FILES
Single cut. Saw file.
Dimensions, mmItem
number
Triangular 160 mm #00 31900
Square 160 mm #00 31910
Round 160 mm #00 31920
Flat 160 mm #00 31930
Half-round 160 mm #00 31940
Feather edge 160 mm #00 31950
Diamond flat 160 mm #00 31980
Set 5 pieces #00 31990
HALF-ROUND FILE
Rasp cut. Designed for the
wood and soft material filling.
Dimensions, mm Bastard
250 31843
FLAT FILE
Designed for the general
purposes.
Dimensions, mm Bastard Second Smooth
150 31311 31312 31313
SCRAPERS & KNIVES
KNIVES & BLADES
36 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
PAPER KNIFE 18MM STANDART
Item number
49215
ABS material, with TPR grip, metal sheath, 1PC of 18mm carbon
steel blade, blister card.
PAPER KNIFE 18MM ECONOMY
Item number
49210
ABS material, metal sheath, 1PC of 18mm carbon steel blade,
blister card.
PAPER KNIFE 25MM STANDART
Item number
49225
ABS material, with TPR grip, metal sheath, 1PC of 25mm carbon
steel blade, blister card.
FISHING KNIFE ALPHA FISH
Item number
49501
Fishing knife with scale on the blade. Material: SS and Rubber
Handle, Leather Sheath.
PAPER KNIFE 18MM BLADES
Item number
49418
18*100*0.5mm, carbon steel material, 10pcs of blades in a PP
tube.
PAPER KNIFE 25MM BLADES
Item number
49418
25*125*0,7mm, carbon steel material, 10pcs of blades in a PP
tube.
CAULKING & FOAM GUNS
CAULKING & FOAM GUNS
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 37
FOAM GUN WITH A TEFLON ADAPTER
Item number
50400
Brass needle; Teflon coated Aluminum adapter (universal);
Nickel-plated Aluminum body; No sticking of adapter (as long
as 20 days); Foam residue. Ergonomic; Nickel-plated steel
trigger; Nickel-plated brass barrel (half shrinked).
FOAM GUN STANDART
Item number
50300
Brass needle; Nickel-plated Aluminum adapter (universal);
Nickel-plated Aluminum body; No sticking of adapter (as long
as 20 days); foam residue. Ergonomic; Nickel-plated steel
trigger; Nickel-plated brass barrel (half shrinked).
TEFLON COATED FOAM GUN
Item number
50500
Ergonomic; Teflon coated steel trigger; Teflon coated brass
barrel (half shrinked), needle and nozzle; Teflon coated
Aluminum adapter (universal) and body; No sticking of
adapter (as long as 30 days); 0% foam residue.
SKELETON CAULKING GUN
Item number
50000
With pin in the handle, pin or seal puncture, easy to use.
Surface: Powder coated, zinc coated pistol rod.
Item number
50100
9"silicone gun, all-steel welded construction. Surface
finished: zinc power coated. Other color could be
available. Great for use of sealing windows and doors.
Use to seal buildings and sheds. Also great for use in
the bathroom around toilets and bathtubs and howers.
CAULKING GUN
SAUSAGE STYLE CAULKING GUN
Item number
50200
With a pin in the handle, pin or seal puncture, easy to use.
Surface: Powder coated, zinc coated pistol rod.
DIFFERENT
FINISHING, PLUMBING, HOUSEHOLDING AND AUTOMOBILE TOOLS
38 ENJOY YOUR WORK EXPERIENCE WITH ONYX!
FLOATING RULE
Main material is Aluminum, the working edge is made of
hardened steel.
Length, m Item number
1 51010
1,5 51015
2 51020
2,5 51025
3 51030
ADJUSTABLE GAS WRENCH
Whole body with quality carbon steel or CR-V steel, jaw teeth
induction quenched, spraying paint, polished two sides of jaws.
Dimensions,
inch
Item
number
Dimensions,
inch
Item
number
32 70102 63 70105
38 7010363L (long
shackle)70115
50 70104 75 70106
CONSTRUCTION OVAL PENCIL
The pencil is probably one of the
oldest marking devices. Pencils
are great because they don't
smear and are erasable.
Item number
70900
JERRICAN
20 liters, wall thickness 0.6mm.
Item number
70000
PAD LOCK
Сast iron housing with corrosion-resistant
coating; Cylinder mechanism in brass;
Shackle made from hardened chrome steel.
Dimensions, inch Item number
1 60001
1,5 60002
2 60003
CHALK LINE
ABS housing.
Item number
70901
Dimensions,
mm
Item
number
Dimensions,
inch
Item
number
8х8 75008 14х14 75014
10х10 75010 17х17 75017
11х11 75011 19х19 75019
12х12 75012 22х22 75022
13х13 75013 24х24 75024
COMBINED RATCHET WRENCH
Carbon steel.
Long life.
Dimensions, mm Item number
12x13 75113
14x17 75117
TWO SIDES RATCHET WRENCH
Carbon steel.
Long life.
WORKING PROTECTION
WORKING GLOVES
ENJOY YOUR WORK EXPERIENCE WITH ONYX! 39
GLOVES TYPE 1
10.5" B grade cow split
leather, half lining as photo.
Item number
66002
GLOVES TYPE 2
10.5"B grade cow split leather,
half lining, reinforce the palm.
Item number
66062
GLOVES TYPE 3
10.5"B grade cow split
leather with half lining.
Item number
66012
GLOVES TYPE 4
10.5" A, B grade cow split leather
with no lining.
Type Item number
A grade 66040
B grade 66042
GLOVES TYPE 6
14" AB grade cow split leather
with lining.
GLOVES TYPE 5
10.5" A, B grade cow split
leather, half lining.
Type Item number
A grade 66020
B grade 66022
Item number
66101
GLOVES TYPE 7
14" red B grade cowhide split
leather welding glove
full lining, one piece leather back,
leather self binding Kevlar thread.
Item number
66132
GLOVES TYPE 8
14" golden yellow B grade cowhide
split leather welding glove full
lining, one piece leather back,
red half circle reinforced palm, cuff
connect red stripe.
Item number
66142
GLOVES TYPE 9
14" C grade natural cowhide split
leather welding glove
no lining, two pieces leather back,
cutting edge.
Item number
66114
GLOVES TYPE 10
10.5" B grade Natural cowhide split
leather work glove single palm, half
lining, rubberized cuff,
green/grey/red fabric/cotton back
at the back of glove.
Item number
66082