ONLINE AUCTION - Microsoft · customer service +1 877-37-hilco ... 8 – takamatsu model x200 dual...

A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

ONLINE AUCTION• CNC Equipment• Gear Production• Forging• Electrical Distribution• Plant Support

Online Bidding Opens: Thursday, June 4th

Online Bidding Closes: Wednesday, June 10th

St Catharines, Ontario, Canada

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

HilcoTM IndustrialdireCTiOnsFrOM eiTHer TOrOnTO peArsOn inTernATiOnAl AirpOrT (YYZ) Or BUFFAlOinTernATiOnAl AirpOrT (BUF): TRAVeL To THe QeW And TAKe eXiT FoR onTARioSTReeT (eXiT 47). TURn SoUTH (RigHT) onTo onTARio STReeT And TRAVeL APPRoX.1 MiLe To PLAnT enTRAnce And PARKing LoT on eAST Side oF onTARio ST.

FUrTHer inFOrMATiOn• AUcTion WiLL Be condUcTed in U.S. cURRencY onLY.

• An 18% BUYeR'S PReMiUM WiLL Be cHARged on ALL ASSeTS. THeBUYeR’S PReMiUM WiLL Be RedUced To 16% FoR PAYMenTS MAde BYMeAnS oF cASH, cASHieR’S cHecK, coMPAnY cHecK (WiTH BAnK LeTTeRoF gUARAnTee) oR WiRe TRAnSFeR WiTHin 48 HoURS oF SALe cLoSe.

• ReMoVAL iS BY APPoinTMenT onLY, WiTH HoURS oF ReMoVALBeTWeen 8AM To 4PM MondAY THRU FRidAY. PLeASe See oUR WeBSiTeFoR AddiTionAL ReMoVAL inFoRMATion. BUYeRS WiTH iTeMS LeFT onSiTe AFTeR deAdLine ARe SUBJecT To FineS oF $500 PeR dAY.

• ALL BUYeRS/ViSiToRS To THe SiTe ARe ReQUiRed To HAVe THe FoLLoWing PPe: HARd HAT, SAFeTY gLASSeS, SAFeTY VeST, STeeL Toe SAFeTYSHoeS. ALL JeWeLRY MUST Be ReMoVed PRioR To enTeRing THe FAciLiTY.

MACHinerY & eQUipMenT

Ken PLAneT 248-238-7988 • [email protected] inFOrMATiOn

LeSiA JoSePH 616-328-6892 • [email protected] AccoUnTS ReceiVABLe AT [email protected] serviCe

+1 877-37-HiLco • +1 616-732-1800 • [email protected]

(11) CNC HORIZONTAL MACHINING CENTERS

Online Bidding Opens

THURSdAY, JUne 4TH

Beginning AT 10AM LocAL TiMe

Online Bidding ClOses

WedneSdAY, JUne 10TH

CHeCk www.HilCoind.Com for ClosinG times

preview

BY APPoinTMenT onLYto sCHedUle An inspeCtion, pleAse ContACt ken plAnet At 248-238-7988, [email protected]

AsseT lOCATiOn282 / 285 onTARio ST ST. cATHARineS, onTARio, cAnAdA

ONLINE AUCTION

For more information, please visit us on the web at www.hilcoind.com/automotivedrivetrainequipment 3

(11) CNC HORIZONTALMACHINING CENTERS6 – ENSHU MODEL J40H 4-AXIS CNC

HORIZONTAL MACHINING CENTERS,S/Ns 149, 150, 151, 152, 153 & 154 (All 1997),Nikken Rotary Table, Approx. Travels: X – 500mm (19.69"), Y – 500 mm (19.69"), Z – 500 mm(19.69"), 24 Position ATC, Dual Arm ToolChanger, GE Fanuc 18-M CNC Control

3 – TOYODA MODEL FH55 4-AXIS CNC HORIZONTAL MACHINING CENTERS,S/Ns NMU1166, 1169 & 1170, Dual Pallets 21.5"x 21.5", Travels: X – 28", Y – 28", Z – 22.1", GEFanuc 15M CNC Control, 60 Position ATC – 50Taper

1 – CINCINNATI MODEL T-10 CNC HORIZONTALMACHINING CENTER, S/N 3121A2184-0016,Acramatic 900 Control, Dual Pallets 19.7" x19.7", Travels: X – 26", Y – 26", Z – 26"

1 – MITSUI SEIKI MODEL HT4A 4-AXIS CNC HORIZONTAL MACHINING CENTER, DualPallets 19.5" x 19.5", 32 Position ATC – 50 Taper,Fanuc 15-M CNC Control

ASSETS AVAILABLEIMMEDIATELY

Contact Ken Planet 248-238-7988, [email protected]

Make an

Offer

(11) CNC HORIZONTAL MACHINING CENTERS


(30+) CNC LATHES & TURNING CENTERS1 – FUJI MODEL CSD 400 300MM X 150MM FULLY AUTOMATED

HORIZONTAL TWIN SPINDLE CNC LATHE, S/N SE0097050 (2013),Dual Spindles, Fewer than 2100 Hours, Fanuc Oi-TD Control, Max.Spindle Speed 2220 RPM, Spindle Motors 15 H.P., Marpos P7meElectronic Measuring System, Gantry Robot, 10-Pallet Work Stocker,Located Offsite – To Schedule an Inspection Under Power Contact KenPlanet 248-238-7988, Email [email protected]

13 – FUJI MODEL FS4-31G1 TWO-AXIS CNC LATHES, (All 2003), Size ofWorkpiece 100 mm x 60 mm (3.94" x 2.36"), Spindle Diameter 100 mm(3.94"), Spindle Bore Diameter 56 mm (2.29"), Spindle Speeds 750-4000 RPM / 580-2710 RPM, Work Range: X – 300 mm (11.81"), Z– 270 mm (10.63"), Gang Tools, Chuck Diameter 8", Fanuc 21i-TB CNCControl, Robot Type L35-08B Loader/Unloader, Load/Unload Speed 2.5 Seconds, Chip Conveyor, Marposs M5 Gauge

3 – MORI SEIKI MODEL ZL25B-1000 4-AXIS CNC TURNING CENTERS,S/Ns ZL25-692, 695, 715, (2) Turrets – 10 Position (Upper) & 8 Position(Lower), Tailstock, GE Fanuc Series 16-T CNC Control, TurningDiameter 10.24", Centers 40", Fanuc #G265C Gantry Robot

8 – TAKAMATSU MODEL X200 DUAL SPINDLE CNC LATHES (All 2004),Max Bar Diameter 51 mm (2"), Travels: X – 240 mm (9.45"), Z – 550 mm(21.65"), Fanuc 18i-TB CNC Control, 12 Position Turret, PendantControl, Max RPM 2,000, Load Station, Gauge Station, Buffer Conveyor

1 – HARDINGE CONQUEST T51 2-AXIS CNC TURNING CENTERS, S/N CLT-520-BC, 12 Position Turret, Tail Stock, Fanuc 18-T CNCControl, Robot Loader Arm, Chip Conveyor

1 – HITACHI SEIKI TYPE HITEC-TURN 20S II CNC TURNING CENTER, S/N HTS 2148HL, SeikiMulti Control, 8" Diameter Chuck x 5,000 RPM, Yasnac LX3 Power Supply

1 – HITACHI SEIKI MODEL HITEC-TURN 25S CNC LATHE, Seiki Multi CNC Control, 10 PositionATC, Tail Stock, Kitagawa B10 Chuck

1 – TOYODA MODEL GT44 2-AXIS CNC LATHE, S/N 44021, GE Fanuc 15M CNC Control, 12 Position Turret, Chip Conveyor

1 – J&L 4-AXIS CNC TURNING CENTER, S/N 578046, Two Turrets (8 Position & 6 Position),Tailstock, 12" Diameter 3-Jaw Chuck, Chip Conveyor, GE Fanuc 15-T CNC Control, Bar Feed

1 – OKUMA MODEL LS30-N 2-AXIS CNC TURNING CENTER, S/N 8308-0168, 3-Jaw Chuck,Tailstock, Tool Turret

3 – AUTOMATION DEVICES CANADA HOPPER/FEEDERS, S/N J230502-2, Allen BradleyPanelview 550 Terminal

2004

2013 Under Power

(30+) CNC LATHES & TURNING CENTERS


CNC WIRE TYPE EDMS1 – SEIBU MODEL EW-A7S WIRE TYPE CNC ELECTRI-

CAL DISCHARGE MACHINE, S/N 9740EX428 (1998),Chamber Approx. 33" F-B x 43" L-R, Remcor #CH-1500Chiller, Hycool CKD Water Cooling Unit, 4-AxisPendant Control

4 – ELOX ASTRA MKII 4000 ELECTRICAL DISCHARGEMACHINES

CNC ROBOTS3 – FANUC MODEL G265 GANTRY ROBOTS, with Teach

Pendants, Rails & Supports

(37) GEAR SHAPERS6 – FELLOWS 10-2 GEAR SHAPERS, SPM 33-1300,

RPM “D" Shaft 5-800, Feed Per Stroke ,001" – .040"31 – DEMM #SR250-50 GEAR SHAPERS (All 1999),

Cutler Hammer Panelmate Terminal, SPM 33-1300,RPM “D" Shaft 5-800, Feed Per Stroke .001" – .040"

(13) GEAR GENERATORS13 – GLEASON MODEL 725 STRAIGHT BEVEL REVA-

CYCLE GEAR GENERATORS, Root Angle Range 15°– 50°, Pitch Diameter 6" Manual, Pitch Diameter –Automatic Gear/Pinion Hopper 4"

CNC EDMs • CNC ROBOTS • GEAR MACHINERY

(8) GEAR INSPECTION &CHECKERS1 – ILLITRON MODEL 2276-7-3C GEAR

CHECKER, S/N 10981, ITW Illitron#1607-10 Electronic Recorder, S/N 77

1 – ILLITRON MODEL 3912A-3C COM-PUTERIZED HELICAL LEAD GEARCHECKER, S/N 10979, Illitron #1607-18-2 Special Electronic Recorder, S/N11581, Manual Sine Bar Settings,Vernac Pitch Adjustment

1 – GLEASON MODEL CSF/2 SINGLEFLANK GEAR TESTER, S/N 1016-01,Set Tru #0418 – 6-1/4" Diameter x 4-Jaw Chuck, Head Travel Approx. 16"Travel

1 – ILLITRON MODEL 3412B-3C COM-PUTERIZED VARIABLE INVOLUTEGEAR MEASURING CENTER, S/N11315, Illitron DRO

4 – MOORE GEAR CHECKERS


FORGING EQUIPMENT1 – PELTZER & EHLERS MODEL POLYMASTER

630 TON 4-STATION HOT FORMING PRESS,S/N 282634, Slide Stroke 12.6" (320 mm),Max Stroke of Die Knock-Outs 6.3" (160 mm),Die Diameter 9.8" (25 mm), Strokes perMinute Max 50, Max Blank Diameter 3.94"(100 mm), Max Billet Length 6.3" (160 mm),Power Infeed Rolls

1 – IPE MODEL CHESTON #SP-753 750 KWINDUCTION HEATER, S/N C8792A

1 – BECHE MODEL RBQ 800A ROUND DIECROSS ROLLING MACHINE, Machine#122102 (1997), Workpiece Diameter 1.97"(50 mm), Max Length Workpiece 39.4"(1000 mm), Max Tangential Rollingforce15.5 Tons (152 kN), Cycle Time 5-10Seconds, Distance Between Rolls 3.94-8.86" (100-225 mm), Tool Clamp Area 31.5"Dia x 39.4" (800 mm Dia x 1000 mm), 150HP Emerson/US Drive Motor, MotorizedRoll Gap Adjustment

1 – AJAX MODEL 25C 2500 TON PRESSFRAME, S/N 4585

4 – TOLEDO 160 TON STRAIGHT SIDE SINGLE CRANK TRIM PRESSES

3 – FROHLICH TYPE WS1 / SIZE 1500 &SIZE 1750 HOPPER & VIBRATORYBOWL FEEDERS (Late as 2000)

BAR SHEAR LINE1 – AMD 360 TON HYDRAULIC BILLET, ANGLE & BAR

SHEAR, S/N 360-1830, 4-Post Hydraulic Press, Stroke 5",Between Columns 18 1/2" L-R x 17" F-B, Bar Capacity 3",Capacity 10,000 Lb. Bar Debundler & Feeder, PressCapacity 30 Cuts/Minute

INDUCTION HARDENING1 – CONTOUR HARDENINGS INC. MODEL MICRO PULSE

DUAL SPINDLE AUTOMATIC CONTOUR INDUCTIONHARDENER (1994), Pillar #RF450P Power Source, S/N35349, KW 300/450, Freq 450 kHZ, Quench Pump, AllenBradley Monitor

2 – TOCCO INDUCTION HARDENERS, S/Ns T4-4901-12A & T4-4901-12C, Hardened & Straighten Operation, EquipmentIncludes: Inductron/Tocco Panel #100-10T-03, S/N T4-4901-12A/ 12-304G-12A Static Power Supply, Output 100 KW, 800 Volts

4 – TOCCO MODEL OL-204 INDUCTION HARDENERS, S/NsT4-4903, NA, Stamp Station

1 – CK INDUSTRIES CRACK/LOAD & HARDNESSTESTER, Job # 95-1133 (1996), Includes Allen BradleyPanelview 1200, KJ Law Verimet 9000 Control, KJ LawVerimet M730 III

1 – AJAX TOCCO MODEL 0221314A INDUCTION HARD-ENER, S/N 23-1045A & 23-1045B, Panelmate Power

1 – IBG MODEL P/N11108 EDDY CURRENT CHECKER,Panelmate Power Pro ((East / B-33))

QUANTITY OF Tocco Model D-80761 Power Modules &Tocco Model OL-242 Dual Channel Energy Monitors

Partial Listing Only, Please VisitOur Website

www.hilcoind.com

FORGING EQUIPMENT • BAR SHEAR LINE • INDUCTION HARDENING


SHOT BLAST EQUIPMENT2 – WHEELABRATOR MODEL TUMBLAST 48" X 72" BLAST

SYSTEMS, S/Ns A77865 & A92943, Load Capacity 30 CubicFeet, Load Tray Approx. 66" F-B x 64" L-R

1 – IOWA ENGINEERING PROCESSES CORP. MODEL 550CASCADE CHAMBER TYPE DEBURRING MACHINE, S/N H-3021 (1996), Allen Bradley #1336 Plus Drives, WeightCapacity 550 Lbs, Work Plate 27" x 29"

4 – IOWA ENGINEERING PROCESSES CORP. MODEL 80-2800CASCADE CHAMBER TYPE DEBURRING MACHINES,S/Ns H-3029-B, NA (1997), Allen Bradley Panelview 550Terminal, Weight Capacity 800 Lbs, Work Plate 28.5" x 38", Two7.5 HP Vibration Drives, 5 HP Motor & Hydraulic Pump, 2 HPMedia Return Motor, 1 HP Wash Return Motor

1 – WHEELABRATOR #1 W/A ROLL THRU M/C TWO-WHEELHORIZONTAL TYPE SHOT BLAST MACHINE, S/N 10-0196C,Two Abrasive Wheels x 20 HP, Dust Collector

HEAT TREAT FURNACE1 – CANEFCO NATURAL GAS FIRED ANNEALING LINE,

Capacity Net 2,400 Lbs/Hr, Max Temp 1650° F, 5-Zone Furnace,Natural Gas, Hi-Tronic Weigh Scale

COORDINATE MEASURING MACHINE1 – CARL ZEISS MODEL UMC 850 COORDINATE MEASURING

MACHINE, S/N 78334, Range: Z-600 mm, Y-1800 mm

HORIZONTAL BORING MILL1 – TOS MODEL WD130A TRAVELLING COLUMN

FLOOR TYPE HORIZONTAL BORING MILL, S/N 0337,Work Spindle Diameter 130 mm (5.12"), HeadstockVertical Travel 2300 mm (90.55"), Headstock HorizontalTravel 450 mm (17.72"), Max Distance Work SpindleCenterline & Bedway Surface 812 mm (32"), ColumnTravel Along Bed 3200 mm (126"), Length of Bed 5230mm (209.5"), Retrofit Indramat / Allen Bradley PLC /Electric AC Servo Drives

ENGINE LATHES1 – LODGE & SHIPLEY 22" ENGINE LATHE, Swing 22" x

Centers Approx. 80", Tail Stock, Cross Slide, 4-JawChuck x Diameter 21", 2-Axis Acu-Rite DRO, 20 HP,Spindle Speeds 9-500 RPM

1 – TURRET MODEL MAXTURN 1800 18" X 60" ENGINELATHE, 60 inch X axis, 20" Swing over the ways, 12"Swing over the cross slide, 29" Swing over the 8" Gap,12" 3-Jaw Chuck, Steady Rest

SHOT BLAST • HEAT TREAT FURNACE • CMM • HORIZONTAL BORING MILL


MILLING MACHINES1 – CINCINNATI MODEL 28" SERIES

HYDROTEL VERTICAL MILLINGMACHINE, S/N 80-4090392-1, Table28" x 92"

1 – CINCINNATI MODEL HYDROTELVERTICAL MILLING MACHINE,Table 23" x 83", 8" Vise with RotaryBase

HORIZONTAL BAND SAW1 – BEHRINGER MODEL HBP430A

AUTOMATIC HORIZONTAL BANDSAW, S/N 599499, Capacity 17"Diameter / 17" x 17" Rectangle, BarDebundler & Feed – Capacity 20',Allen Bradley Panelview 550Terminal

MILLS • SAW • GRINDERS • HONES • DRILLS

CENTERLESS & DOUBLE DISC GRINDERS4 – CINCINNATI MILACRON MODEL 330-15 CENTERLESS GRINDERS,

S/Ns 350415H78-0006, 350415H79-0015, 350415H80-0002 & 350415H80-0018, Grinding Wheel Diameter Max 24", Truing Attachment, Marposs E44Gauge, Truing Control, Compensation – Fine & Coarse, Injector – Advance &Retract

2 – GARDNER MODEL DMBD-33 DOUBLE DISC GRINDERS, S/Ns 911-5 &911-6, Disc Diameter 33", Two (2) 40 HP Spindle Motors

SURFACE GRINDER 1 – MATTISON 16" X 30" X 72" SURFACE GRINDER, S/N 1119, Table 16" x

80", Electromagnetic Chuck 16" x 74", Neutrofier II Control; Travatrol#CRC17 Control, S/N 1RC35A, Coolant, 30 HP

HONES & GUN DRILLS6 – EXCELLO MODEL 8HQ HORIZONTAL TYPE SINGLE SPINDLE HONES,

S/Ns H-8064, H-8065, H-8066, H-8067, H-8068 & H-8101, Stroke Approx. 16"2 – SUNNEN AH-222E AUTOMATIC HORIZONTAL HONES 1 – TWO-SPINDLE VENT HOLE DEBURRING MACHINE, Indramat Slide

Motor, Stroke Approx. 20" 1 – NAGEL 3HS6-30 3-SPINDLE GUN DRILL, S/N 28-7132, Allen Bradley

Panelview Terminal

Partial Listing Only, Please Visit Our Website

www.hilcoind.com


BROACHING MACHINES • AUTOMATIC SCREW MACHINES • PRODUCTION

(22) BROACHING MACHINES8 – US BROACH & MACHINE MODEL 25T X 54 25 TON X 54"

STROKE VERTICAL PULL-DOWN BROACHES, (All 1982), 60 HP Motor & Oilgear Pump

4 – DETROIT BROACH MODEL 15 X 42 VPD 15 TON X 42"STROKE VERTICAL PULL DOWN BROACHES, S/Ns 91473,91727, Motor & Oilgear Pump

1 – GENERAL BROACH MODEL 15T X 42 10 TON X 42" STROKEVERTICAL PULL DOWN BROACHES

2 – DETROIT BROACH MODEL 10 X 42 VPD 10 TON X 42"STROKE VERTICAL PULL DOWN BROACHES

6 – US BROACH & MACHINE MODEL 10T X 42" VPD 10 TON X 42"STROKE VERTICAL PULL DOWN BROACHES, S/Ns M-91766, M-91767, M-91869, M-91870 & M-91871, 20 HP Motor& Oilgear Pump

1 – AMERICAN BROACH, S/N 79169 (1993)QUANTITY OF Unused Broaching Sticks

AUTOMATIC SCREW MACHINES5 – ACME GRIDLEY MODEL RB8 2-5/8 8-SPINDLE AUTOMATIC SCREW MACHINES,

Bar Loader, PLC ControlQUANTITY OF Automatic Screw Machine Tooling, Includes Collets, Cams, Guard Plates,Tool Holders, Pushers, Collet Pads, Tube Liners, Gears, Cross Slides, Collet TubeAssembly, Spindle Drive Bearings, Roll Clutch, Retainers, Etc.

PRODUCTION EQUIPMENT – BALANCERS, TURNING,MILLING, FINISHING4 – EXCELLO MODEL XLO DRILLING/MILLING SYSTEMS/FINISHING MACHINES3 – WERTH ENGINEERING 55H-3-AL 3-SPINDLE PRODUCTION TURNING LATHES2 – WERTH ENGINEERING MODEL 9-18-VNC-AL-3 3-SPINDLE CNC VERTICAL

TURNING CENTERS, S/Ns 6534-0888 & 6535-0888 (1988)4 – SENECA FALLS MODEL CS50 AUTOMATIC DRILLING & CENTERING MACHINES,

S/Ns 25CS861, 25CD869, N/A, Centers Approx. 21"


TOOL PRESETTERS • WASHERS • PLANT FACILITIES

TOOL PRESETTERS3 – KELCH TYPE TRABANT 3-STATION

TURRET TOOL PRESETTERS, S/Ns3220, 3222 & 3223 (All 1996), Kelch#382/EA9, Kelch Computer

1 – MARPOSS TOOL SETTER

WASHERS3 – VILO SYSTEMS TWO-STAGE BASKET TYPE PARTS WASHER (1991)12 – ASE/CENTRI-SPRAY/RANSOHOFF/VENTURE TWO-STAGE & THREE-STAGE

BELT TYPE WASHERS, Sizes 12” Wide x 12’ Long to 48” Wide x 18’ Long,

PLANT FACILITIES8 – HELICAL DYNAMICS INC. HELI-FLO OIL & MIST COLLECTORS (Late as 2001),

Capacity from 2000 CFM to 9000 CFM1 – MONROE ENVIRONMENTAL STC-050-6 MIST COLLECTOR, S/N 9323431 (1993)1 – WHEELABRATOR DUST COLLECTOR2 – BAC COOLING TOWERS, 50 HP & 75 HP Motor / Pumps

Make an

OfferASSETS AVAILABLE

IMMEDIATELYContact Ken Planet 248-238-7988,

[email protected]


COOLANT FILTRATION SYSTEMS • CENTRIFUGES • LAB/TEST

COOLANT FILTRATION SYSTEMS / CENTRIFUGES1 – SUPERIOR FILTRATION MODEL SV-4-60 48" WIDE COOLANT FILTRATION SYS-

TEM, S/N 1247-97 (1997), Two (2) 40 HP Motor & Hydraulic Pumps, Above Floor Type,Panelmate Terminal

1 – FILTRA SYSTEMS MODEL ECM-105 COOLANT FILTRATION SYSTEM,S/N 1233, Width 36", Two (2) 5 HP Motors & Gusher Pumps, 1 HP Motor Drag OutConveyor

1 – FLOWCON MODEL TSK-150/930C CENTRIFUGE, S/N 5339 (1997), System, (5)Clean Coolant Pumps, GLI #63 Conductivity Analyzer Digital Measuring Control

INSPECTION EQUIPMENT & DYNAMOMETER CELL1 – LECO MODEL VARIPOL VP-150 3 STATION GRINDER/POLISHER1 – PARKING PAWL DYNAMOMETER1 – TESTEK MODEL PLANETARY GEAR FATIGUE TESTER, 440 F.W.D. Gear1 – BENDIX MODEL 484 PORTAGE LAYOUT MACHINE, 50" X 70" Slotted

Table, 15" 3-Jaw Chuck1 – TAYLOR HOBSON MODEL TALYROND 252 ROUNDNESS CHECKER1 – TAYLOR HOBSON MODEL TALYROND ROUNDNESS CHECKER, S/N

112/1883-204, Max GMS3944, Height 300 mm

ROLLING STOCK2 – HYSTER MODEL S120XL2 12,000 LB. CAPACITY FORKLIFTS,

S/Ns E004V02397Z & D004D10140Y, Cab Enclosure, Max LIft 112", Two-Stage Mast, Forks 48"

2 – TAYLOR-DUNN B2-48 UTILITY CARTS, S/Ns 152745 & 153214, Bed 76”1 – TENNANT MODEL 8410 RIDING TYPE FLOOR SWEEPER/SCRUBBER,

S/N 12495, Hopper Raise/Lower1 – TENNANT MODEL 300000 WALK BEHIND FLOOR SCRUBBER, 24-Volt,

with MAC Battery Charger

PLANT SUPPORT & ASSORTED TOOL ROOMQUANTITY OF Multi-Drawer Storage Cabinets: Lista/Vidmar/Nu-Era, UnusedCarbide Inserts, Sine Plates, Chucks, Inspection Items, Lathes, Mills, ArborPresses, Pedestal Grinders, Drill Presses, Rigging Accessories, Welders,Flammable Cabinets, 12”x12”x36” Wood Timbers, Etc.


POWER DISTRIBUTION • POWER HOUSE • BRIDGE CRANES

1 – COMPLETE HIGH VOLTAGE POWER DISTRIBUTION CENTER, Includes: (4) Rows ITEFeeder Breakers – 15,000 / 480 Volt, ITE Potential Transformers Hydro 0 14,400 – 120 Volt,Qty Siemens/ITE 1000 AMP/600 Volt Bustribution Busway, Catalog BDP 310 90-07593101

19 – ELECTRICAL SUBSTATIONS – Capacity to 3000 KVA, ABB, Ferranti Packard &Westinghouse Transformers & Back-Up Transformers (Late as 1999), Reactivar TypeBV6000 Capacitors, C-Can Rectifiers, ITE Switchgear, Substations Capacity: HV 14490 –LV 2300 / HV 14490 – LV 13110 / HV 14490 – LV 480 / HV 13800 – LV 480, SubstationsMay be Offered in Bulk or Individually

1 – COMPLETE POWER HOUSE: Peabody CPDR-MT 21 ½ Boiler, Foster Wheeler SteamBoiler, Atlas Copco #GA18FF Air Compressor, Four (2) Canadian Ingersoll Rand Centac AirCompressors, Atlas Copco #ZR Air Compressor

POWER DISTRIBUTION /POWER HOUSE

(These Items May be Offered as Complete Units or as Individual Components)

BRIDGE CRANES1 – RICHARD WILCOX 7.5 TON CAPACITY YARD CRANE, Span

Approx. 40’, Runway Approx. 320’, Cab Control, WalkerNational 42” Diameter Magnet

1 – MENTOR 3 TON CAPACITY SINGLE GIRDER UNDER RUNNING BRIDGE CRANE, S/N 02-5727-1, Span 16', MainHoist 2 HP, Trolley Drive 1/4 HP, Bridge Drive 1/2 HP, Yale Hoist#KEL3-00H1053

1 – SHEPARD NILES 5 TON SINGLE GIRDER BRIDGE CRANE,S/N 70061, Span Approx. 35', 6-Way Pendant

1 – RICHARD WILCOX 1 TON SINGLE GIRDER BRIDGECRANE, Span Approx. 30', CM Series 1 Ton Electric Hoist, 2-Way Pendant

5 – PACIFIC COAST MODEL STAHLKRAN 2 TON SINGLEGIRDER BRIDGE CRANES, Span 24’, 30’ & 40', CM Hoist, 6-Way Pendant

1 – SPANMASTER 2 TON DUAL GIRDER BRIDGE CRANE, SpanApprox. 30', 6-Way Pendant

2 – 1 TON SINGLE GIRDER BRIDGE CRANES, Span Approx. 21',Manual Hoist

1 – PROVINCIAL 2 TON BRIDGE CRANE, Span Approx. 15', CM Series 635 Electric Hoist

Partial Listing Only, Please Visit Our Websitewww.hilcoind.com

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • GMS4478 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of saleA 16% buyer's premium will be charged on all assets whenpayment is made by means of cash, cashier’s check, com-pany check (with bank letter of guarantee) or wire transferwithin 48 hours of sale close. An 18% buyer's premium willbe charged on all assets when payment is made by creditcard (accepted for invoices of $2000 or less), or when pay-ment is received after 48 hours of sale close. everything willbe sold online to the highest bidder for cash, in accordancewith the Auctioneer’s customary “Terms of Sale”, copies ofwhich will be posted online. All items will be sold “as is,where-is” without any warranties, expressed or implied.Although obtained from sources deemed reliable, theAuctioneer makes no warranty or guarantee to the accura-cy of the information herein contained. Bidders are encour-aged to thoroughly inspect the items on which they intendto bid prior to sale. Absolutely no items will be removeduntil the day after the conclusion of the sale and paymentis made in full. Subject to additions, deletions and priorsale. For updated information, please visit our website atwww.hilcoind.com for any date, sale process, terms andconditions and list of available assets.

payment: inVoiceS WiLL Be eMAiLed WiTHin 24 HoURSAFTeR THe AUcTion cLoSeS. Payment is to be made toHilco industrial, LLc. Payment options: ViSA, Mastercarddiscover accepted – if invoice total is $2,000 or less; WireTransfer; certified check; or company check (with Bank letterof guarantee – see sample letter below). All sales are subjectto sales tax. Purchasers claiming exemptions from taxes mustprovide proof satisfactory to the Auctioneer of their entitlementto claim such exemptions. Please see complete terms andconditions on our website, www.hilcoind.com.

sample Bank letter(Bank name) unconditionally guarantees payment to Hilco industrial from (company name). This guarantee will be valid for purchases made at theAuction of Automotive drivetrain equipment on June 4-10, 2015.

FollowUs on:

A Hilco Global Company

Vested in Your Success

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial ONLINE AUCTION• CNC Equipment• Gear Production• Forging• Electrical Distribution• Plant Support

Online Bidding Opens: Thursday, June 4th

Online Bidding Closes: Wednesday, June 10th

St Catharines, Ontario, Canada

ONLINE AUCTION - Microsoft · customer service +1 877-37-hilco ... 8 – takamatsu model x200 dual...

Documents

Transcript of ONLINE AUCTION - Microsoft · customer service +1 877-37-hilco ... 8 – takamatsu model x200 dual...