ONCISE GICAL TECHNIQUE...- THE FRACTURE TECHNIQUE - The Calcanail fracture step by step Patient...

4
FRACTURE CONCISE SURGICAL TECHNIQUE www.FHortho.com

Transcript of ONCISE GICAL TECHNIQUE...- THE FRACTURE TECHNIQUE - The Calcanail fracture step by step Patient...

Page 1: ONCISE GICAL TECHNIQUE...- THE FRACTURE TECHNIQUE - The Calcanail fracture step by step Patient positioning Placement of distractor K-wires Introduction of hollow reamer Placement

FRACTURE

CONCISESURGICALTECHNIQUE

www.FHortho.com

Page 2: ONCISE GICAL TECHNIQUE...- THE FRACTURE TECHNIQUE - The Calcanail fracture step by step Patient positioning Placement of distractor K-wires Introduction of hollow reamer Placement

Surgical technique 15 steps

- Minimally invasive percutaneous approach at the posterior calcaneal tuberosity avoids complications associated with standard lateral ORIF approach;

- Locking nail holds posterior faced articular surface in the proper position after intrafocal reduction;

- Option to convert easily from internal fixation procedure to subtalar fusion.

- THE FRACTURE TECHNIQUE -

The Calcanail fracture step by step

Patient positioning

Placement of distractor K-wires

Introduction of hollow reamer

Placement of K-wire in posterior tuberosity

Fixation of the distractor

Extraction of the hollow reamer

1

3

5

2

4

6

Lateral or prone.

Introduce 2 K-wires perpendiculary to the calcaneus and the talus.

Introduce the hollow reamer with a motor drive all the way to the fracture using fluoroscopy tracking.

Controlled centering using lateral and axial images under fluoroscopy.

Position the distractor and lock in place. Do not distract.

Bone plug removed.

CONCISESURGICALTECHNIQUE

Page 3: ONCISE GICAL TECHNIQUE...- THE FRACTURE TECHNIQUE - The Calcanail fracture step by step Patient positioning Placement of distractor K-wires Introduction of hollow reamer Placement

Placement of the alignment frame

Measure the length of the screws

Determine the length of the nail

Distraction

Placement of the cap

Preparation for the locking step

Locking step

Nail introduction

Fracture reduction

11

7

13

9

15

12

8

14

10

With the screwdriver, introduce the cap, then remove the K-wires, nail holder, distractor, and close the various incisions.

Remove the drill guide and drill over K-wire with a cannulated drill.

+ bone plug

If the fracture is of the mixed type, reduce the medial fragment first

Introduce the 2 screws using the guide wires and cannulated screwdriver.

* The distractor is only removed after the locking step

Page 4: ONCISE GICAL TECHNIQUE...- THE FRACTURE TECHNIQUE - The Calcanail fracture step by step Patient positioning Placement of distractor K-wires Introduction of hollow reamer Placement

Surgical technique 15 steps

4

2015

07 -

© FH

O co

m’ -

Illustr

ation

s © M

arc D

onon

- to

_calc

anail

_15_

step_

us_2

1

2

3

4 5 6

7

8

11

12

9

10

13

1415

16

1718

20 2425

2623

22

27 28

21

19

INSTRUMENTATION SET

1. Compresseur .................................................................................. réf. 266 3532. Distracteur ...................................................................................... réf. 265 5993. Equerre de positionnement Calcanail ........................................ réf. 266 1474. Tréphine d’albation pour clou d’arthrodèse Ø14 ..................... réf. 265 5985. Tréphine Calcanail Ø12 ................................................................. réf. 265 5736. Tréphine Calcanail Ø10 ................................................................. réf. 265 5727. Broche épaulée Calcanail Ø12 (x2)............................................. réf. 265 5718. Broche épaulée Calcanail Ø10 (x2)............................................. réf. 265 5709. Broche de vis canulées Ø1.6 Lg 200mm .................................... réf. 266 15810. Foret Ø3.7 pour vis canulée ......................................................... réf. 265 58711. Broche distracteur Ø3.2 Lg 150mm (x2) ................................... réf. 265 66812. Jauge de longueur pour clou ...................................................... réf. 266 34013. Jauge pour vis canulée L150/200mm ....................................... réf. 266 14614. Guide clou Calcanail...................................................................... réf. 266 29115. Spatule ............................................................................................ réf. 265 586

16. Tournevis 3.5 canulé Ø18 ............................................................. réf. 254 59917. Chasse greffon droit ...................................................................... réf. 265 57618. Chasse greffon courbe .................................................................. réf. 265 57519. Vis de liaison cadre de visée - porte-clou ................................. réf. 265 58120. Protecteur de tunnel osseux Ø12 ............................................... réf. 265 58421. Protecteur de tunnel osseux Ø10 ............................................... réf. 265 58322. Canon de visée pour broche Ø1.6 Lg 200mm ........................... réf. 266 14823. Cadre de visée clou Ø10 Fracture ................................................ réf. 265 57724. Liaison poignée-clou Calcanail Ø10 ........................................... réf. 265 56825. Cadre de visée clou Ø12 Arthrodèse........................................... réf. 265 57826. Liaison poignée-clou Calcanail Ø12 ........................................... réf. 265 56927. Porte-clou Calcanail Ø10 ............................................................. réf. 265 57928. Porte-clou Calcanail Ø12 ............................................................. réf. 265 580

1. Compressor .................................................................................... Ref. 266 3532. Distractor ........................................................................................ Ref. 265 5993. Calcanail Positioning square ....................................................... Ref. 266 1474. Hollow reamer for Fusion/ARTHRODESIS Nail removal .......... Ref. 265 5985. Calcanail Hollow reamer Ø12 ...................................................... Ref. 265 5736. Calcanail Hollow reamer Ø10 ...................................................... Ref. 265 5727. Calcanail K-wire with stopper Ø12 (x2) ..................................... Ref. 265 5718. Calcanail K-wire with stopper Ø10 (x2) ..................................... Ref. 265 5709. K-wire for cannulated screws Ø1.6 Lg 200mm ........................ Ref. 266 15810. Drill bit Ø3.7 for cannulated screws ........................................... Ref. 265 58711. K-wire for distractor Ø3.2 Lg 150mm (x2) ................................ Ref. 265 66812. Nail length gauge ......................................................................... Ref. 266 34013. Cannulated screw length gauge L150/200mm ....................... Ref. 266 14614. Calcanail Nail guide ...................................................................... Ref. 266 291

15. Spatula ............................................................................................ Ref. 265 58616. Cannulated 3.5 screwdriver Ø18 ................................................. Ref. 254 59917. Straight tamp ................................................................................ Ref. 265 57618. Curved tamp .................................................................................. Ref. 265 57519. Alignment frame-nail holder connecting screw ..................... Ref. 265 58120. Bone tunnel plug Ø12 .................................................................. Ref. 265 58421. Bone tunnel plug Ø10 .................................................................. Ref. 265 58322. Drill guide for K-wire Ø1.6 Lg 200mm ....................................... Ref. 266 14823. Alignment frame for Fracture nail Ø10 ..................................... Ref. 265 57724. Calcanail Handle-nail connector Ø10 ........................................ Ref. 265 56825. Alignment frame for Arthrodesis nail Ø12................................ Ref. 265 57826. Calcanail Handle-nail connector Ø12 ........................................ Ref. 265 56927. Calcanail Nail holder Ø10 ............................................................. Ref. 265 57928. Calcanail Nail holder Ø12 ............................................................. Ref. 265 580

1

2

3

4 5 6

7

8

11

12

9

10

13

1415

16

1718

20 2425

2623

22

27 28

21

19

INSTRUMENTATION SET

1. Compresseur .................................................................................. réf. 266 3532. Distracteur ...................................................................................... réf. 265 5993. Equerre de positionnement Calcanail ........................................ réf. 266 1474. Tréphine d’albation pour clou d’arthrodèse Ø14 ..................... réf. 265 5985. Tréphine Calcanail Ø12 ................................................................. réf. 265 5736. Tréphine Calcanail Ø10 ................................................................. réf. 265 5727. Broche épaulée Calcanail Ø12 (x2)............................................. réf. 265 5718. Broche épaulée Calcanail Ø10 (x2)............................................. réf. 265 5709. Broche de vis canulées Ø1.6 Lg 200mm .................................... réf. 266 15810. Foret Ø3.7 pour vis canulée ......................................................... réf. 265 58711. Broche distracteur Ø3.2 Lg 150mm (x2) ................................... réf. 265 66812. Jauge de longueur pour clou ...................................................... réf. 266 34013. Jauge pour vis canulée L150/200mm ....................................... réf. 266 14614. Guide clou Calcanail...................................................................... réf. 266 29115. Spatule ............................................................................................ réf. 265 586

16. Tournevis 3.5 canulé Ø18 ............................................................. réf. 254 59917. Chasse greffon droit ...................................................................... réf. 265 57618. Chasse greffon courbe .................................................................. réf. 265 57519. Vis de liaison cadre de visée - porte-clou ................................. réf. 265 58120. Protecteur de tunnel osseux Ø12 ............................................... réf. 265 58421. Protecteur de tunnel osseux Ø10 ............................................... réf. 265 58322. Canon de visée pour broche Ø1.6 Lg 200mm ........................... réf. 266 14823. Cadre de visée clou Ø10 Fracture ................................................ réf. 265 57724. Liaison poignée-clou Calcanail Ø10 ........................................... réf. 265 56825. Cadre de visée clou Ø12 Arthrodèse........................................... réf. 265 57826. Liaison poignée-clou Calcanail Ø12 ........................................... réf. 265 56927. Porte-clou Calcanail Ø10 ............................................................. réf. 265 57928. Porte-clou Calcanail Ø12 ............................................................. réf. 265 580

www.FHortho.com844-77-FHINC

Reference Fracture Nail Ø10

268 311 Calcanail® Nail Ø10 L 45 + cap

268 312 Calcanail® Nail Ø10 L 50 + cap

268 313 Calcanail® Nail Ø10 L 55 + cap

1

Reference Screw

268 317 Cannulated screw Ø5 L 24

268 318 Cannulated screw Ø5 L 26

268 319 Cannulated screw Ø5 L 28

268 320 Cannulated screw Ø5 L 30

268 321 Cannulated screw Ø5 L 32

268 322 Cannulated screw Ø5 L 34

268 323 Cannulated screw Ø5 L 36

268 324 Cannulated screw Ø5 L 38

268 325 Cannulated screw Ø5 L 40

2